aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2024-06-23bpf: fix build when CONFIG_DEBUG_INFO_BTF[_MODULES] is undefinedAlan Maguire1-2/+2
Kernel test robot reports that kernel build fails with resilient split BTF changes. Examining the associated config and code we see that btf_relocate_id() is defined under CONFIG_DEBUG_INFO_BTF_MODULES. Moving it outside the #ifdef solves the issue. Reported-by: kernel test robot <[email protected]> Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/ Signed-off-by: Alan Maguire <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2024-06-23cpu: Fix broken cmdline "nosmp" and "maxcpus=0"Huacai Chen1-0/+3
After the rework of "Parallel CPU bringup", the cmdline "nosmp" and "maxcpus=0" parameters are not working anymore. These parameters set setup_max_cpus to zero and that's handed to bringup_nonboot_cpus(). The code there does a decrement before checking for zero, which brings it into the negative space and brings up all CPUs. Add a zero check at the beginning of the function to prevent this. [ tglx: Massaged change log ] Fixes: 18415f33e2ac4ab382 ("cpu/hotplug: Allow "parallel" bringup up to CPUHP_BP_KICK_AP_STATE") Fixes: 06c6796e0304234da6 ("cpu/hotplug: Fix off by one in cpuhp_bringup_mask()") Signed-off-by: Huacai Chen <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected]
2024-06-23octeontx2-pf: Fix coverity and klockwork issues in octeon PF driverRatheesh Kannoth4-35/+35
Fix unintended sign extension and klockwork issues. These are not real issue but for sanity checks. Signed-off-by: Ratheesh Kannoth <[email protected]> Signed-off-by: Suman Ghosh <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2024-06-23timekeeping: Add missing kernel-doc function commentsYang Li1-0/+3
Fixup the incomplete kernel-doc style comments for do_adjtimex() and hardpps() by documenting the function parameters. Reported-by: Abaci Robot <[email protected]> Signed-off-by: Yang Li <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Link: https://lore.kernel.org/r/[email protected] Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=9301
2024-06-23sched_ext: Make scx_bpf_cpuperf_set() @cpu arg signedDavid Vernet1-1/+1
The scx_bpf_cpuperf_set() kfunc allows a BPF program to set the relative performance target of a specified CPU. Commit d86adb4fc065 ("sched_ext: Add cpuperf support") defined the @cpu argument to be unsigned. Let's update it to be signed to match the norm for the rest of ext.c and the kernel. Note that the kfunc declaration of scx_bpf_cpuperf_set() in the common.bpf.h header in tools/sched_ext already listed the cpu as signed, so this also fixes the build for tools/sched_ext and the sched_ext selftests due to kfunc declarations now being emitted in vmlinux.h based on BTF (thus causing the compiler to error due to observing conflicting types). Fixes: d86adb4fc065 ("sched_ext: Add cpuperf support") Signed-off-by: David Vernet <[email protected]> Signed-off-by: Tejun Heo <[email protected]>
2024-06-23irqchip/stm32mp-exti: Rename internal symbolsAntonio Borneo1-160/+152
Rename all the internal symbols accordingly to the new name of the driver. Renaming done automatically through sed rules: s/stm32_exti_set_type/stm32mp_exti_convert_type/g s/stm32_exti_h_/stm32mp_exti_/g s/stm32_exti/stm32mp_exti/g s/stm32_bank/bank/g s/stm32_/stm32mp_/g s/STM32_/STM32MP_/g s/STM32MP1_/STM32MP_/g s/stm32mp1_exti_/stm32mp_exti_/g s/stm32-exti-h/stm32mp-exti/g Manually fix some indentation after the rename. [ tglx: Mop up more coding style issues while at it ] Signed-off-by: Antonio Borneo <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2024-06-23irqchip/stm32-exti: Split MCU and MPU codeAntonio Borneo4-667/+751
Keep only the code for ARMv7m STM32 MCUs in in stm32-exti.c and split out the code for ARMv7a & ARMv8a STM32MPxxx MPUs into stm32mp-exti.c Signed-off-by: Antonio Borneo <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2024-06-23arm64: Kconfig: Select STM32MP_EXTI on STM32 platformsAntonio Borneo1-1/+1
Use the new config flag to build the correct driver that will be extracted from the old code. Signed-off-by: Antonio Borneo <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2024-06-23ARM: stm32: Use different EXTI driver on ARMv7m and ARMv7aAntonio Borneo1-1/+2
Build the proper driver by selecting the appropriate config flag. Signed-off-by: Antonio Borneo <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2024-06-23irqchip/stm32-exti: Add CONFIG_STM32MP_EXTIAntonio Borneo1-0/+4
To guarantee bisect-ability during the split of stm32-exti in MCU and MPU code, introduce CONFIG_STM32MP_EXTI. Signed-off-by: Antonio Borneo <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2024-06-23irqchip/dw-apb-ictl: Support building as moduleJisheng Zhang2-4/+11
The driver is now always built in. In some synaptics ARM64 SoCs it is used as a second level interrupt controller hanging off the ARM GIC and is therefore loadable during boot. Enable it to be built as a module and handle built-in usage correctly, so that it continues working on systems where it is the main interrupt controller. [ tglx: Massage changelog ] Signed-off-by: Jisheng Zhang <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2024-06-23irqchip/riscv-aplic: Simplify the initialization codeJinjie Ruan1-7/+6
The initialization code has an is_of_node() check and invokes to_of_node() for every of_property_*() invocation. to_of_node() has a is_of_node() check already, so simplify the code by invoking to_of_node() and checking that for NULL. If not NULL hand in the node pointer to of_property_*(). The same applies to of_property_*() which fails when invoked with a NULL node pointer. [ tglx: Massaged change log ] Signed-off-by: Jinjie Ruan <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Link: https://lore.kernel.org/all/[email protected]
2024-06-23Loongarch: Support loongarch avecTianyang Zhang14-10/+517
Introduce the advanced extended interrupt controllers. This feature will allow each core to have 256 independent interrupt vectors and MSI interrupts can be independently routed to any vector on any CPU. [ tglx: Fixed up coding style. Made on/offline functions void ] Co-developed-by: Jianmin Lv <[email protected]> Signed-off-by: Jianmin Lv <[email protected]> Co-developed-by: Liupu Wang <[email protected]> Signed-off-by: Liupu Wang <[email protected]> Signed-off-by: Tianyang Zhang <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2024-06-23bcachefs: Add missing bch2_journal_do_writes() callKent Overstreet1-0/+7
This fixes a rare deadlock when we're doing an emergency shutdown due to failure to do a journal write. Signed-off-by: Kent Overstreet <[email protected]>
2024-06-23bpf, docs: Address comments from IETF Area DirectorsDave Thaler1-35/+45
This patch does the following to address IETF feedback: * Remove mention of "program type" and reference future docs (and mention platform-specific docs exist) for helper functions and BTF. Addresses Roman Danyliw's comments based on GENART review from Ines Robles [0]. * Add reference for endianness as requested by John Scudder [1]. * Added bit numbers to top of 32-bit wide format diagrams as requested by Paul Wouters [2]. * Added more text about why BPF doesn't stand for anything, based on text from ebpf.io [3], as requested by Eric Vyncke and Gunter Van de Velde [4]. * Replaced "htobe16" (and similar) and the direction-specific description with just "be16" (and similar) and a direction-agnostic description, to match the direction-agnostic description in the Byteswap Instructions section. Based on feedback from Eric Vyncke [5]. [0] https://mailarchive.ietf.org/arch/msg/bpf/DvDgDWOiwk05OyNlWlAmELZFPlM/ [1] https://mailarchive.ietf.org/arch/msg/bpf/eKNXpU4jCLjsbZDSw8LjI29M3tM/ [2] https://mailarchive.ietf.org/arch/msg/bpf/hGk8HkYxeZTpdu9qW_MvbGKj7WU/ [3] https://ebpf.io/what-is-ebpf/#what-do-ebpf-and-bpf-stand-for [4] https://mailarchive.ietf.org/arch/msg/bpf/i93lzdN3ewnzzS_JMbinCIYxAIU/ [5] https://mailarchive.ietf.org/arch/msg/bpf/KBWXbMeDcSrq4vsKR_KkBbV6hI4/ Acked-by: David Vernet <[email protected]> Signed-off-by: Dave Thaler <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2024-06-23bcachefs: Fix null ptr deref in journal_pins_to_text()Kent Overstreet1-0/+5
Signed-off-by: Kent Overstreet <[email protected]>
2024-06-23irqchip/armada-370-xp: Add support for 32 MSI interrupts on non-IPI platformsPali Rohár1-14/+63
The doorbell interrupts have the following layout on IPI vs no-IPI platforms: | 0...7 | 8...15 | 16...31 | ------------------+---------+----------+---------------------+ IPI platform | IPI | n/a | MSI | ------------------+---------+----------+---------------------+ non-IPI platform | MSI | ------------------+------------------------------------------+ Currently the driver only allows for the upper 16...31 interrupts for MSI domain (i.e. the MSI domain has only 16 interrupts). On platforms where IPI is not available, we can use whole 32 MSI interrupts. Implement support also for the lower 16 MSI interrupts on non-IPI platforms. [ Marek: refactored, changed commit message ] Signed-off-by: Pali Rohár <[email protected]> Signed-off-by: Marek Behún <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Reviewed-by: Andrew Lunn <[email protected]>
2024-06-23irqchip/armada-370-xp: Do not touch IPI registers on platforms without IPIPali Rohár1-2/+10
On platforms where IPI is not available in the MPIC, the IPI registers instead represent an additional set of MSI interrupt registers (currently unused by the driver). Do not touch these registers on platforms where IPI is not available in the MPIC. [ Marek: refactored, changed commit message ] Signed-off-by: Pali Rohár <[email protected]> Signed-off-by: Marek Behún <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Reviewed-by: Andrew Lunn <[email protected]>
2024-06-23irqchip/armada-370-xp: Only call ipi_resume() if IPI is availablePali Rohár1-2/+16
IPI is available only on systems where the mpic controller does not have a parent interrupt defined (e.g. on Armada XP). If a parent interrupt is defined, inter-processor interrupts are handled by an interrupt controller higher in the hierarchy (most probably a parent GIC). Only call ipi_resume() on systems where IPI is available in the mpic controller. Signed-off-by: Pali Rohár <[email protected]> Signed-off-by: Marek Behún <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> [ refactored a little and changed commit message ]
2024-06-23irqchip/armada-370-xp: Do not allow mapping IRQ 0 and 1Pali Rohár1-0/+4
IRQs 0 (IPI) and 1 (MSI) are handled internally by this driver, generic_handle_domain_irq() is never called for these IRQs. Disallow mapping these IRQs. [ Marek: changed commit message ] Signed-off-by: Pali Rohár <[email protected]> Signed-off-by: Marek Behún <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Reviewed-by: Andrew Lunn <[email protected]>
2024-06-23irqchip/armada-370-xp: Use atomic_io_modify() instead of another spinlockMarek Behún1-9/+3
Use the dedicated atomic_io_modify() instead of a open coded spin_lock() + readl() + writel() + spin_unlock() sequence. This allows to drop the irq_controller_lock spinlock from the driver. Signed-off-by: Marek Behún <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Reviewed-by: Andrew Lunn <[email protected]>
2024-06-23irqchip: Add missing MODULE_DESCRIPTION() macrosJeff Johnson3-0/+3
On x86, make allmodconfig && make W=1 C=1 reports: WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/irqchip/irq-ts4800.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/irqchip/irq-meson-gpio.o Add the missing invocation of the MODULE_DESCRIPTION() macro to all files which have a MODULE_LICENSE(). This includes a 3rd file, irq-mvebu-pic.c, which did not produce a warning with the x86 allmodconfig, but which may cause this warning with other kernel configurations. Signed-off-by: Jeff Johnson <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2024-06-23irqchip/renesas-rzg2l: Reorder function calls in rzg2l_irqc_irq_disable()Lad Prabhakar1-1/+1
The order of function calls in the disable operation should be the reverse of that in the enable operation. Thus, reorder the function calls to first disable the parent IRQ chip before disabling the TINT IRQ. Reported-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Lad Prabhakar <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Tested-by: Claudiu Beznea <[email protected]> # on RZ/G3S Link: https://lore.kernel.org/r/[email protected]
2024-06-23irqchip/loongson-liointc: Set different ISRs for different coresHuacai Chen1-2/+2
The liointc hardware provides separate Interrupt Status Registers (ISR) for each core. The current code uses always the ISR of core #0, which works during boot because by default all interrupts are routed to core #0. When the interrupt routing changes in the firmware configuration then this causes interrupts to be lost because they are not configured in the corresponding core. Use the core index to access the correct ISR instead of a hardcoded 0. [ tglx: Massaged changelog ] Fixes: 0858ed035a85 ("irqchip/loongson-liointc: Add ACPI init support") Co-developed-by: Tianli Xiong <[email protected]> Signed-off-by: Tianli Xiong <[email protected]> Signed-off-by: Huacai Chen <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2024-06-23irqchip/loongson-eiointc: Use early_cpu_to_node() instead of cpu_to_node()Huacai Chen1-2/+3
Multi-bridge machines required that all eiointc controllers in the system are initialized, otherwise the system does not boot. The initialization happens on the boot CPU during early boot and relies on cpu_to_node() for identifying the individual nodes. That works when the number of possible CPUs is large enough, but with a command line limit, e.g. "nr_cpus=$N" for kdump, but fails when the CPUs of the secondary nodes are not covered. During early ACPI enumeration all CPU to node mappings are recorded up to CONFIG_NR_CPUS. These are accessible via early_cpu_to_node() even in the case that "nr_cpus=N" truncates the number of possible CPUs and only provides the possible CPUs via cpu_to_node() translation. Change the node lookup in the driver to use early_cpu_to_node() so that even with a limitation on the number of possible CPUs all eointc instances are initialized. This can't obviously cure the case where CONFIG_NR_CPUS is too small. [ tglx: Massaged changelog ] Fixes: 64cc451e45e1 ("irqchip/loongson-eiointc: Fix incorrect use of acpi_get_vec_parent") Signed-off-by: Huacai Chen <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected]
2024-06-23Merge tag 'i2c-for-6.10-rc5' of ↵Linus Torvalds6-41/+83
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "The core gains placeholders for recently added functions when CONFIG_I2C is not defined as well documentation fixes to start using inclusive terminology. The drivers get paths in DT bindings fixed as well as proper interrupt handling for the ocores driver" * tag 'i2c-for-6.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: docs: i2c: summary: be clearer with 'controller/target' and 'adapter/client' pairs docs: i2c: summary: document 'local' and 'remote' targets docs: i2c: summary: document use of inclusive language docs: i2c: summary: update speed mode description docs: i2c: summary: update I2C specification link docs: i2c: summary: start sentences consistently. i2c: Add nop fwnode operations i2c: ocores: set IACK bit after core is enabled dt-bindings: i2c: google,cros-ec-i2c-tunnel: correct path to i2c-controller schema dt-bindings: i2c: atmel,at91sam: correct path to i2c-controller schema
2024-06-23Merge tag '6.10-rc4-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds5-32/+27
Pull smb client fixes from Steve French: "Five smb3 client fixes - three nets/fiolios cifs fixes - fix typo in module parameters description - fix incorrect swap warning" * tag '6.10-rc4-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: Move the 'pid' from the subreq to the req cifs: Only pick a channel once per read request cifs: Defer read completion cifs: fix typo in module parameter enable_gcm_256 cifs: drop the incorrect assertion in cifs_swap_rw()
2024-06-23Merge tag 'fixes-2024-06-23' of ↵Linus Torvalds2-21/+12
git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock Pull memblock fix from Mike Rapoport: "Fix fragility in checks for unset node ID. Use numa_valid_node() function to verify that nid is a valid node ID instead of inconsistent comparisons with either NUMA_NO_NODE or MAX_NUMNODES" * tag 'fixes-2024-06-23' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock: memblock: use numa_valid_node() helper to check for invalid node ID
2024-06-23Merge tag 'mips-fixes_6.10_2' of ↵Linus Torvalds2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS fixes from Thomas Bogendoerfer: - fix lseek in o32 compat mode - fix for microMIPS MT ASE helpers * tag 'mips-fixes_6.10_2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: mips: fix compat_sys_lseek syscall MIPS: mipsmtregs: Fix target register for MFTC0
2024-06-23Merge tag 'x86_urgent_for_v6.10_rc5' of ↵Linus Torvalds2-2/+3
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Borislav Petkov: - An ARM-relevant fix to not free default RMIDs of a resource control group - A randconfig build fix for the VMware virtual GPU driver * tag 'x86_urgent_for_v6.10_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/resctrl: Don't try to free nonexistent RMIDs drm/vmwgfx: Fix missing HYPERVISOR_GUEST dependency
2024-06-23Merge tag 'powerpc-6.10-3' of ↵Linus Torvalds2-5/+15
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - Prevent use-after-free in 64-bit KVM VFIO - Add generated Power8 crypto asm to .gitignore Thanks to Al Viro and Nathan Lynch. * tag 'powerpc-6.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: KVM: PPC: Book3S HV: Prevent UAF in kvm_spapr_tce_attach_iommu_group() powerpc/crypto: Add generated P8 asm to .gitignore
2024-06-23bcachefs: Add missing recalc_capacity() callKent Overstreet1-0/+1
This fixes filesystem size not changing on device removal. Signed-off-by: Kent Overstreet <[email protected]>
2024-06-23irqdomain: Fix formatting irq_find_matching_fwspec() kerneldoc commentAnna-Maria Behnsen1-1/+2
Modify the comment formatting in irq_find_matching_fwspec function to enhance code readability and maintain consistency. Signed-off-by: Anna-Maria Behnsen <[email protected]> Signed-off-by: Shivamurthy Shastri <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2024-06-23irqchip/imx-mu-msi: Fix codingstyle in imx_mu_msi_domains_init()Anna-Maria Behnsen1-4/+2
Fixes the coding style of irq_domain_create_linear() call within imx_mu_msi_domains_init() for better code readability. Signed-off-by: Anna-Maria Behnsen <[email protected]> Signed-off-by: Shivamurthy Shastri <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2024-06-23arm64: dts: hisilicon: hi3660: add dedicated hi3660-usb3-otg-bc compatibleKrzysztof Kozlowski1-1/+1
Each syscon node must come with a dedicated/specific compatible, which is also reported by dtbs_check: hi3660-hikey960.dtb: usb3_otg_bc@ff200000: compatible: ['syscon', 'simple-mfd'] is too short Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Krzysztof Kozlowski <[email protected]>
2024-06-23dt-bindings: soc: hisilicon: document hi3660-usb3-otg-bcKrzysztof Kozlowski1-0/+46
Add dedicated bindings for the Hisilicon Kirin 960 USB OTG Syscon, to fully document the block and also fix dtbs_check warning: hi3660-hikey960.dtb: usb3_otg_bc@ff200000: compatible: ['syscon', 'simple-mfd'] is too short Reviewed-by: Conor Dooley <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Krzysztof Kozlowski <[email protected]>
2024-06-23arm: dts: aspeed: Use standard 'i2c' bus node nameRob Herring (Arm)3-44/+44
The standard node name for I2C buses is 'i2c'. Signed-off-by: Rob Herring (Arm) <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Krzysztof Kozlowski <[email protected]>
2024-06-23arm: dts: nuvoton: Use standard 'i2c' bus node nameRob Herring (Arm)2-22/+22
The standard node name for I2C buses is 'i2c'. Signed-off-by: Rob Herring (Arm) <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Krzysztof Kozlowski <[email protected]>
2024-06-23spi: add devm_spi_optimize_message() helperMark Brown575-3282/+5887
Merge series from David Lechner <[email protected]>: In the IIO subsystem, we are finding that it is common to call spi_optimize_message() during driver probe since the SPI message doesn't change for the lifetime of the driver. This patch adds a devm_spi_optimize_message() helper to simplify this common pattern.
2024-06-23ASoC: nau8822: add MCLK supportMark Brown2-17/+60
Merge series from Andrejs Cainikovs <[email protected]>: This change adds local MCLK handling, which would cover a case when a reference audio clock is present in a system, but is not allowed to be changed, see [1]. [1]: https://lore.kernel.org/all/[email protected]/
2024-06-23ASoC: qcom: display port changesMark Brown5-0/+99
Merge series from [email protected]: This patchset adds support for. 1. parse Display Port module tokens from ASoC topology 2. add support to DP/HDMI Jack events. 3. fixes a typo in function name in sm8250 Verified these patches on X13s along with changes to tplg in https://git.codelinaro.org/linaro/qcomlt/audioreach-topology/-/tree/topic/x13s-dp?ref_type=heads and ucm changes from https://github.com/Srinivas-Kandagatla/alsa-ucm-conf/tree/topic/x13s-dp x1e80100 is verified by Krzysztof with his changes in tplg https://git.codelinaro.org/linaro/qcomlt/audioreach-topology/-/merge_requests/7/commits
2024-06-23ASoC: Few constifications (mostly arguments)Mark Brown13-55/+58
Merge series from Krzysztof Kozlowski <[email protected]>: Make few pointers in ASoC functions as pointers to const, so the code is clearer to read, a bit safer and allows further constifications (e.g. placing some data as rodata).
2024-06-23ASoC: Add ak4619 codec supportMark Brown4-0/+981
Merge series from Kuninori Morimoto <[email protected]>: This is v3 patch-set for ak4619 driver. It was created by Khanh, and I updated/adjusted to upstream. It was tested on Renesas V4M GrayH Link: https://lore.kernel.org/r/[email protected] Link: https://lore.kernel.org/r/[email protected]
2024-06-23ASoC: add compatible for ti,pcm5242Mark Brown3-1/+5
Merge series from Christian Hewitt <[email protected]>: Update bindings and add a driver compatible for the pcm5242 chip used on the Odroid HiFi-Shield2 i2c mezzanine board.
2024-06-23ASoC: codecs: wcd family: cleanupsMark Brown13-185/+60
Merge series from Krzysztof Kozlowski <[email protected]>: Set of simple cleanups from similar issues in all Qualcomm WCD93xx codecs. The first patch "ASoC: codecs: wcd-mbhc: Constify passed MBHC reg fields" is a requirement for few others, but except this they are independent.
2024-06-23ASoC: dt-bindings: convert everest,es7134.txt &Mark Brown4-43/+129
Merge series from Neil Armstrong <[email protected]>: Convert the text bindings of the Everest ES7241/ES7134/7144/7154 2 channels I2S analog to digital converter to dt-schema.
2024-06-23tlv320adc3xxx: Allow MICBIAS pins to be used asMark Brown2-21/+108
Merge series from Ricard Wanderlof <[email protected]>: In some cases, depending on system design, the MICBIAS pins on the chip are not needed as such, but a couple of extra GPIO pins would be useful. This patch allows the MICBIAS pins to be configured in the device tree as general purpose output pins, controlled via the GPIO framework. Owing to their originally intended purpose there are some limitations: when the MICBIAS pins are deactivated, they will float, so will likely need a pulldown in many applications. When activated, they will assume the voltage specified by the micbias1-vg and micbias2-vg properties, respectively, meaning that the resulting output voltage will be 2.0 V, 2.5 V or AVDD .
2024-06-23Cirrus Logic Family of ADCsMark Brown6-0/+1364
Merge series from Paul Handrigan <[email protected]>: This patchset provides ASoC support for the latest family of Cirrus Logic multichannel, high performance audio ADCs. The devices that are supported are CS5302 (2 channel ADC), CS5304 (4 channel ADC), and CS5308 (8 channel ADC).
2024-06-23ice: Rebuild TC queues on VSI queue reconfigurationJan Sokolowski1-1/+9
TC queues needs to be correctly updated when the number of queues on a VSI is reconfigured, so netdev's queue and TC settings will be dynamically adjusted and could accurately represent the underlying hardware state after changes to the VSI queue counts. Fixes: 0754d65bd4be ("ice: Add infrastructure for mqprio support via ndo_setup_tc") Reviewed-by: Wojciech Drewek <[email protected]> Signed-off-by: Jan Sokolowski <[email protected]> Signed-off-by: Karen Ostrowska <[email protected]> Tested-by: Pucha Himasekhar Reddy <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2024-06-23dt-bindings: net: fman: remove ptp-timer from required listFrank Li1-1/+0
IEEE1588(ptp) is optional feature for network. Remove it from required list to fix below CHECK_DTBS warning. arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dtb: ethernet@f0000: 'ptp-timer' is a required property Signed-off-by: Frank Li <[email protected]> Acked-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.