| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
For Gen-1 targets like SM6115, it is seen that stressing out the
controller in host mode results in HC died error:
xhci-hcd.12.auto: xHCI host not responding to stop endpoint command
xhci-hcd.12.auto: xHCI host controller not responding, assume dead
xhci-hcd.12.auto: HC died; cleaning up
And at this instant only restarting the host mode fixes it. Disable
SuperSpeed instance in park mode for SM6115 to mitigate this issue.
Cc: [email protected]
Fixes: 97e563bf5ba1 ("arm64: dts: qcom: sm6115: Add basic soc dtsi")
Signed-off-by: Krishna Kurapati <[email protected]>
Reviewed-by: Konrad Dybcio <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>
|
|
For Gen-1 targets like SDM630, it is seen that stressing out the
controller in host mode results in HC died error:
xhci-hcd.12.auto: xHCI host not responding to stop endpoint command
xhci-hcd.12.auto: xHCI host controller not responding, assume dead
xhci-hcd.12.auto: HC died; cleaning up
And at this instant only restarting the host mode fixes it. Disable
SuperSpeed instance in park mode for SDM630 to mitigate this issue.
Cc: [email protected]
Fixes: c65a4ed2ea8b ("arm64: dts: qcom: sdm630: Add USB configuration")
Signed-off-by: Krishna Kurapati <[email protected]>
Reviewed-by: Konrad Dybcio <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>
|
|
For Gen-1 targets like MSM8998, it is seen that stressing out the
controller in host mode results in HC died error:
xhci-hcd.12.auto: xHCI host not responding to stop endpoint command
xhci-hcd.12.auto: xHCI host controller not responding, assume dead
xhci-hcd.12.auto: HC died; cleaning up
And at this instant only restarting the host mode fixes it. Disable
SuperSpeed instance in park mode for MSM8998 to mitigate this issue.
Cc: [email protected]
Fixes: 026dad8f5873 ("arm64: dts: qcom: msm8998: Add USB-related nodes")
Signed-off-by: Krishna Kurapati <[email protected]>
Reviewed-by: Konrad Dybcio <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>
|
|
For Gen-1 targets like IPQ8074, it is seen that stressing out the
controller in host mode results in HC died error:
xhci-hcd.12.auto: xHCI host not responding to stop endpoint command
xhci-hcd.12.auto: xHCI host controller not responding, assume dead
xhci-hcd.12.auto: HC died; cleaning up
And at this instant only restarting the host mode fixes it. Disable
SuperSpeed instance in park mode for IPQ8074 to mitigate this issue.
Cc: [email protected]
Fixes: 5e09bc51d07b ("arm64: dts: ipq8074: enable USB support")
Signed-off-by: Krishna Kurapati <[email protected]>
Reviewed-by: Konrad Dybcio <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>
|
|
For Gen-1 targets like IPQ6018, it is seen that stressing out the
controller in host mode results in HC died error:
xhci-hcd.12.auto: xHCI host not responding to stop endpoint command
xhci-hcd.12.auto: xHCI host controller not responding, assume dead
xhci-hcd.12.auto: HC died; cleaning up
And at this instant only restarting the host mode fixes it. Disable
SuperSpeed instance in park mode for IPQ6018 to mitigate this issue.
Cc: [email protected]
Fixes: 20bb9e3dd2e4 ("arm64: dts: qcom: ipq6018: add usb3 DT description")
Signed-off-by: Krishna Kurapati <[email protected]>
Reviewed-by: Konrad Dybcio <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>
|
|
The SHM bridge makes the Qualcomm RB3 and SM8150-HDK reset while probing
the RMTFS (in qcom_scm_assign_mem()). Blacklist the SHM Bridge on
corresponding platforms using SoC-level compat string. If later it's
found that the bad behaviour is limited just to the particular boards
rather than SoC, the compat strings can be adjusted.
Reported-by: Neil Armstrong <[email protected]>
Fixes: f86c61498a57 ("firmware: qcom: tzmem: enable SHM Bridge support")
Signed-off-by: Dmitry Baryshkov <[email protected]>
Acked-by: Bartosz Golaszewski <[email protected]>
Tested-by: Neil Armstrong <[email protected]> # on Qualcomm RB3
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>
|
|
Return of_clk_add_hw_provider() in order to transfer the error if it
fails.
Fixes: 09be1a39e685 ("clk: qcom: kpss-xcc: register it as clk provider")
Signed-off-by: Chen Ni <[email protected]>
Reviewed-by: Dmitry Baryshkov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>
|
|
Add an initial devicetree for the Lenovo Yoga slim 7x with support for
Display, usb, keyboard, touchpad, touchscreen, PMICs, speaker audio, gpu,
NVMe and remoteprocs.
Signed-off-by: Srinivas Kandagatla <[email protected]>
Tested-by: Rob Clark <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>
|
|
Document the x1e80100 based Lenovo Yoga Slim 7x laptop.
Signed-off-by: Srinivas Kandagatla <[email protected]>
Acked-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>
|
|
`lpass_audiocc_sc8280xp_regmap_config` and `lpasscc_sc8280x_regmap_config`
are not modified and can be declared as const to move their data to a
read-only section.
Signed-off-by: Javier Carrasco <[email protected]>
Reviewed-by: Dmitry Baryshkov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>
|
|
Allocate the memory with scoped/cleanup.h to reduce error handling (less
error paths) and make the code a bit simpler.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>
|
|
Allocate the memory with scoped/cleanup.h to reduce error handling (less
error paths) and make the code a bit simpler.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>
|
|
Allocate the memory with scoped/cleanup.h to reduce error handling (less
error paths) and make the code a bit simpler.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>
|
|
Allocate the memory with scoped/cleanup.h to reduce error handling and
make the code a bit simpler.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>
|
|
Allocate the memory with scoped/cleanup.h to reduce error handling and
make the code a bit simpler.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>
|
|
Use 'return_ptr' helper for returning a pointer without cleanup for
shorter code.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Acked-by: Bartosz Golaszewski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>
|
|
Add the ID for the PM6350 PMIC found on e.g. SM7225 Fairphone 4.
Signed-off-by: Luca Weiss <[email protected]>
Reviewed-by: Dmitry Baryshkov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fix from Wolfram Sang:
"An i2c driver fix"
* tag 'i2c-for-6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: pnx: Fix potential deadlock warning from del_timer_sync() call in isr
|
|
Adds a sysfs entry for the LED on F10 above the crossed out camera icon
on 2023 Zenbooks.
Signed-off-by: Devin Bayer <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Ilpo Järvinen <[email protected]>
Signed-off-by: Ilpo Järvinen <[email protected]>
|
|
Currently building the powerpc selftests with USERCFLAGS set to anything
causes the build to break:
$ make -C tools/testing/selftests/powerpc V=1 USERCFLAGS=-Wno-error
...
gcc -Wno-error cache_shape.c ...
cache_shape.c:18:10: fatal error: utils.h: No such file or directory
18 | #include "utils.h"
| ^~~~~~~~~
compilation terminated.
This happens because the USERCFLAGS are added to CFLAGS in lib.mk, which
causes the check of CFLAGS in powerpc/flags.mk to skip setting CFLAGS at
all, resulting in none of the usual CFLAGS being passed. That can
be seen in the output above, the only flag passed to the compiler is
-Wno-error.
Fix it by dropping the conditional setting of CFLAGS in flags.mk.
Instead always set CFLAGS, but also append USERCFLAGS if they are set.
Note that appending to CFLAGS (with +=) wouldn't work, because flags.mk
is included by multiple Makefiles (to support partial builds), causing
CFLAGS to be appended to multiple times. Additionally that would place
the USERCFLAGS prior to the standard CFLAGS, meaning the USERCFLAGS
couldn't override the standard flags. Being able to override the
standard flags is desirable, for example for adding -Wno-error.
With the fix in place, the CFLAGS are set correctly, including the
USERCFLAGS:
$ make -C tools/testing/selftests/powerpc V=1 USERCFLAGS=-Wno-error
...
gcc -std=gnu99 -O2 -Wall -Werror -DGIT_VERSION='"v6.10-rc2-7-gdea17e7e56c3"'
-I/home/michael/linux/tools/testing/selftests/powerpc/include -Wno-error
cache_shape.c ...
Fixes: 5553a79387e9 ("selftests/powerpc: Add flags.mk to support pmu buildable")
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://msgid.link/[email protected]
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mani/mhi into char-misc-next
Manivannan writes:
MHI Host
========
- Used unique 'mhi_pci_dev_info' struct for product families instead of reusing
a shared struct. This allows displaying the actual product name for the MHI
devices during driver probe.
- Added support for Foxconn SDX72 based modems, T99W515 and DW5934E.
- Added a 'name' field to 'struct mhi_controller' for allowing the MHI client
drivers to uniquely identify each MHI device based on its product/device name.
This is useful in applying any device specific quirks in the client drivers.
WWAN MHI Client driver
======================
- Due to the build dependency with the MHI patch exposing 'name' field to client
drivers, the WWAN MHI client driver patch that is making use of the 'name'
field to apply custom data mux id for Foxconn modems is also included.
Collected Ack from Networking maintainer for this patch.
MHI EP
======
- Fixed the MHI EP stack to not allocate memory for MHI objects from DMA zone.
This was done accidentally while adding the slab cache support and causes the
MHI EP stack to run out of memory while doing high bandwidth transfers.
* tag 'mhi-for-v6.11' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mani/mhi:
net: wwan: mhi: make default data link id configurable
bus: mhi: host: Allow controller drivers to specify name for the MHI controller
bus: mhi: host: Add support for Foxconn SDX72 modems
bus: mhi: host: pci_generic: Use unique 'mhi_pci_dev_info' for product families
bus: mhi: ep: Do not allocate memory for MHI objects from DMA zone
|
|
The caching mode for buffer objects with VRAM as a possible
placement was forced to write-combined, regardless of placement.
However, write-combined system memory is expensive to allocate and
even though it is pooled, the pool is expensive to shrink, since
it involves global CPU TLB flushes.
Moreover write-combined system memory from TTM is only reliably
available on x86 and DGFX doesn't have an x86 restriction.
So regardless of the cpu caching mode selected for a bo,
internally use write-back caching mode for system memory on DGFX.
Coherency is maintained, but user-space clients may perceive a
difference in cpu access speeds.
v2:
- Update RB- and Ack tags.
- Rephrase wording in xe_drm.h (Matt Roper)
v3:
- Really rephrase wording.
Signed-off-by: Thomas Hellström <[email protected]>
Fixes: 622f709ca629 ("drm/xe/uapi: Add support for CPU caching mode")
Cc: Pallavi Mishra <[email protected]>
Cc: Matthew Auld <[email protected]>
Cc: [email protected]
Cc: Joonas Lahtinen <[email protected]>
Cc: Effie Yu <[email protected]>
Cc: Matthew Brost <[email protected]>
Cc: Maarten Lankhorst <[email protected]>
Cc: Jose Souza <[email protected]>
Cc: Michal Mrozek <[email protected]>
Cc: <[email protected]> # v6.8+
Acked-by: Matthew Auld <[email protected]>
Acked-by: José Roberto de Souza <[email protected]>
Reviewed-by: Rodrigo Vivi <[email protected]>
Fixes: 622f709ca629 ("drm/xe/uapi: Add support for CPU caching mode")
Acked-by: Michal Mrozek <[email protected]>
Acked-by: Effie Yu <[email protected]> #On chat
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
|
|
Add missing selection of AUXILIARY_BUS as the driver uses aux bus to
create subdevices.
Reported-by: kernel test robot <[email protected]>
Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/
Signed-off-by: Dmitry Baryshkov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Ilpo Järvinen <[email protected]>
Signed-off-by: Ilpo Järvinen <[email protected]>
|
|
MIDI2 Set Tempo message defines the tempo in 10ns unit for finer
accuracy, while MIDI1 was defined in 1us unit. For adapting this
different unit, introduce "tempo_base" field to snd_seq_queue_tempo
struct so that user-space can pass the proper tempo base unit.
The accepted value is limited, it must be either 0, 10 or 1000.
The protocol version is bumped to 1.0.4 along with this.
The access with the older protocol version ignores the tempo-base
value in ioctls and always treats as 1000.
Reviewed-by: Jaroslav Kysela <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
The internal mic boost on the VAIO models VJFE-CL and VJFE-IL is too high.
Fix this by applying the ALC269_FIXUP_LIMIT_INT_MIC_BOOST fixup to the machine
to limit the gain.
Signed-off-by: Edson Juliano Drosdeck <[email protected]>
Cc: <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
[syzbot reported]
BUG: KMSAN: uninit-value in sized_strscpy+0xc4/0x160
sized_strscpy+0xc4/0x160
copy_name+0x2af/0x320 fs/hfsplus/xattr.c:411
hfsplus_listxattr+0x11e9/0x1a50 fs/hfsplus/xattr.c:750
vfs_listxattr fs/xattr.c:493 [inline]
listxattr+0x1f3/0x6b0 fs/xattr.c:840
path_listxattr fs/xattr.c:864 [inline]
__do_sys_listxattr fs/xattr.c:876 [inline]
__se_sys_listxattr fs/xattr.c:873 [inline]
__x64_sys_listxattr+0x16b/0x2f0 fs/xattr.c:873
x64_sys_call+0x2ba0/0x3b50 arch/x86/include/generated/asm/syscalls_64.h:195
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Uninit was created at:
slab_post_alloc_hook mm/slub.c:3877 [inline]
slab_alloc_node mm/slub.c:3918 [inline]
kmalloc_trace+0x57b/0xbe0 mm/slub.c:4065
kmalloc include/linux/slab.h:628 [inline]
hfsplus_listxattr+0x4cc/0x1a50 fs/hfsplus/xattr.c:699
vfs_listxattr fs/xattr.c:493 [inline]
listxattr+0x1f3/0x6b0 fs/xattr.c:840
path_listxattr fs/xattr.c:864 [inline]
__do_sys_listxattr fs/xattr.c:876 [inline]
__se_sys_listxattr fs/xattr.c:873 [inline]
__x64_sys_listxattr+0x16b/0x2f0 fs/xattr.c:873
x64_sys_call+0x2ba0/0x3b50 arch/x86/include/generated/asm/syscalls_64.h:195
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
[Fix]
When allocating memory to strbuf, initialize memory to 0.
Reported-and-tested-by: [email protected]
Signed-off-by: Edward Adam Davis <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reported-and-tested-by: [email protected]
Signed-off-by: Christian Brauner <[email protected]>
|
|
The method we used was predicated on the assumption that the mount
immediately following the root mount of the mount namespace would be the
rootfs mount of the namespace. That's not always the case though. For
example:
ID PARENT ID
408 412 0:60 /containers/overlay-containers/bc391117192b32071b22ef2083ebe7735d5c390f87a5779e02faf79ba0746ceb/userdata/hosts /etc/hosts rw,nosuid,nodev,relatime - tmpfs tmpfs rw,size=954664k,nr_inodes=238666,mode=700,uid=1000,gid=1000,inode64
409 414 0:61 / /dev/shm rw,nosuid,nodev,noexec,relatime - tmpfs shm rw,size=64000k,uid=1000,gid=1000,inode64
410 412 0:60 /containers/overlay-containers/bc391117192b32071b22ef2083ebe7735d5c390f87a5779e02faf79ba0746ceb/userdata/.containerenv /run/.containerenv rw,nosuid,nodev,relatime - tmpfs tmpfs rw,size=954664k,nr_inodes=238666,mode=700,uid=1000,gid=1000,inode64
411 412 0:60 /containers/overlay-containers/bc391117192b32071b22ef2083ebe7735d5c390f87a5779e02faf79ba0746ceb/userdata/hostname /etc/hostname rw,nosuid,nodev,relatime - tmpfs tmpfs rw,size=954664k,nr_inodes=238666,mode=700,uid=1000,gid=1000,inode64
412 363 0:65 / / rw,relatime - overlay overlay rw,lowerdir=/home/user1/.local/share/containers/storage/overlay/l/JS65SUCGTPCP2EEBHLRP4UCFI5:/home/user1/.local/share/containers/storage/overlay/l/DLW22KVDWUNI4242D6SDJ5GKCL [...]
413 412 0:68 / /proc rw,nosuid,nodev,noexec,relatime - proc proc rw
414 412 0:69 / /dev rw,nosuid - tmpfs tmpfs rw,size=65536k,mode=755,uid=1000,gid=1000,inode64
415 412 0:70 / /sys ro,nosuid,nodev,noexec,relatime - sysfs sysfs rw
416 414 0:71 / /dev/pts rw,nosuid,noexec,relatime - devpts devpts rw,gid=100004,mode=620,ptmxmode=666
417 414 0:67 / /dev/mqueue rw,nosuid,nodev,noexec,relatime - mqueue mqueue rw
418 415 0:27 / /sys/fs/cgroup ro,nosuid,nodev,noexec,relatime - cgroup2 cgroup2 rw,nsdelegate,memory_recursiveprot
419 414 0:6 /null /dev/null rw,nosuid,noexec - devtmpfs devtmpfs rw,size=4096k,nr_inodes=1179282,mode=755,inode64
420 414 0:6 /zero /dev/zero rw,nosuid,noexec - devtmpfs devtmpfs rw,size=4096k,nr_inodes=1179282,mode=755,inode64
422 414 0:6 /full /dev/full rw,nosuid,noexec - devtmpfs devtmpfs rw,size=4096k,nr_inodes=1179282,mode=755,inode64
423 414 0:6 /tty /dev/tty rw,nosuid,noexec - devtmpfs devtmpfs rw,size=4096k,nr_inodes=1179282,mode=755,inode64
430 414 0:6 /random /dev/random rw,nosuid,noexec - devtmpfs devtmpfs rw,size=4096k,nr_inodes=1179282,mode=755,inode64
431 414 0:6 /urandom /dev/urandom rw,nosuid,noexec - devtmpfs devtmpfs rw,size=4096k,nr_inodes=1179282,mode=755,inode64
433 413 0:72 / /proc/acpi ro,relatime - tmpfs tmpfs rw,size=0k,uid=1000,gid=1000,inode64
440 413 0:6 /null /proc/kcore ro,nosuid - devtmpfs devtmpfs rw,size=4096k,nr_inodes=1179282,mode=755,inode64
441 413 0:6 /null /proc/keys ro,nosuid - devtmpfs devtmpfs rw,size=4096k,nr_inodes=1179282,mode=755,inode64
442 413 0:6 /null /proc/timer_list ro,nosuid - devtmpfs devtmpfs rw,size=4096k,nr_inodes=1179282,mode=755,inode64
443 413 0:73 / /proc/scsi ro,relatime - tmpfs tmpfs rw,size=0k,uid=1000,gid=1000,inode64
444 415 0:74 / /sys/firmware ro,relatime - tmpfs tmpfs rw,size=0k,uid=1000,gid=1000,inode64
445 415 0:75 / /sys/dev/block ro,relatime - tmpfs tmpfs rw,size=0k,uid=1000,gid=1000,inode64
446 413 0:68 /bus /proc/bus ro,nosuid,nodev,noexec,relatime - proc proc rw
447 413 0:68 /fs /proc/fs ro,nosuid,nodev,noexec,relatime - proc proc rw
448 413 0:68 /irq /proc/irq ro,nosuid,nodev,noexec,relatime - proc proc rw
449 413 0:68 /sys /proc/sys ro,nosuid,nodev,noexec,relatime - proc proc rw
450 413 0:68 /sysrq-trigger /proc/sysrq-trigger ro,nosuid,nodev,noexec,relatime - proc proc rw
364 414 0:71 /0 /dev/console rw,relatime - devpts devpts rw,gid=100004,mode=620,ptmxmode=666
In this mount table the root mount of the mount namespace is the mount
with id 363 (It isn't visible because it's literally just what the
rootfs mount is mounted upon and usually it's just a copy of the real
rootfs).
The rootfs mount that's mounted on the root mount of the mount namespace
is the mount with id 412. But the mount namespace contains mounts that
were created before the rootfs mount and thus have earlier mount ids. So
the first call to listmnt_next() would return the mount with the mount
id 408 and not the rootfs mount.
So we need to find the actual rootfs mount mounted on the root mount of
the mount namespace. This logic is also present in mntns_install() where
vfs_path_lookup() is used. We can't use this though as we're holding the
namespace semaphore. We could look at the children of the root mount of
the mount namespace directly but that also seems a bit out of place
while we have the rbtree. So let's just iterate through the rbtree
starting from the root mount of the mount namespace and find the mount
whose parent is the root mount of the mount namespace. That mount will
usually appear very early in the rbtree and afaik there can only be one.
IOW, it would be very strange if we ended up with a root mount of a
mount namespace that has shadow mounts.
Fixes: 0a3deb11858a ("fs: Allow listmount() in foreign mount namespace") # mainline only
Signed-off-by: Christian Brauner <[email protected]>
|
|
Kory Maincent says:
====================
net: pse-pd: Add new PSE c33 features
This patch series adds new c33 features to the PSE API.
- Expand the PSE PI informations status with power, class and failure
reason
- Add the possibility to get and set the PSE PIs power limit
v5: https://lore.kernel.org/r/[email protected]
v4: https://lore.kernel.org/r/[email protected]
v3: https://lore.kernel.org/r/[email protected]
v2: https://lore.kernel.org/r/[email protected]
v1: https://lore.kernel.org/r/[email protected]
====================
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
This patch expands PSE callbacks with newly introduced
pi_get/set_current_limit() and pi_get_voltage() callback.
It also add the power limit ranges description in the status returned.
The only way to set ps692x0 port power limit is by configure the power
class plus a small power supplement which maximum depends on each class.
Acked-by: Oleksij Rempel <[email protected]>
Signed-off-by: Kory Maincent <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Expand the c33 PSE attributes with power limit to be able to set and get
the PSE Power Interface power limit.
./ynl/cli.py --spec netlink/specs/ethtool.yaml --no-schema --do pse-get
--json '{"header":{"dev-name":"eth1"}}'
{'c33-pse-actual-pw': 1700,
'c33-pse-admin-state': 3,
'c33-pse-avail-pw-limit': 97500,
'c33-pse-pw-class': 4,
'c33-pse-pw-d-status': 4,
'c33-pse-pw-limit-ranges': [{'max': 18100, 'min': 15000},
{'max': 38000, 'min': 30000},
{'max': 65000, 'min': 60000},
{'max': 97500, 'min': 90000}],
'header': {'dev-index': 5, 'dev-name': 'eth1'}}
./ynl/cli.py --spec netlink/specs/ethtool.yaml --no-schema --do pse-set
--json '{"header":{"dev-name":"eth1"},
"c33-pse-avail-pw-limit":19000}'
None
Signed-off-by: Kory Maincent <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
This patch expands the status information provided by ethtool for PSE c33
with available power limit and available power limit ranges. It also adds
a call to pse_ethtool_set_pw_limit() to configure the PSE control power
limit.
Reviewed-by: Oleksij Rempel <[email protected]>
Signed-off-by: Kory Maincent <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
This patch add a way to get and set the power limit of a PSE PI.
For that it uses regulator API callbacks wrapper like get_voltage() and
get/set_current_limit() as power is simply V * I.
We used mW unit as defined by the IEEE 802.3-2022 standards.
set_current_limit() uses the voltage return by get_voltage() and the
desired power limit to calculate the current limit. get_voltage() callback
is then mandatory to set the power limit.
get_current_limit() callback is by default looking at a driver callback
and fallback to extracting the current limit from _pse_ethtool_get_status()
if the driver does not set its callback. We prefer let the user the choice
because ethtool_get_status return much more information than the current
limit.
expand pse status with c33_pw_limit_ranges to return the ranges available
to configure the power limit.
Reviewed-by: Sai Krishna <[email protected]>
Acked-by: Oleksij Rempel <[email protected]>
Signed-off-by: Kory Maincent <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
This update expands pd692x0_ethtool_get_status() callback with newly
introduced details such as the detected class, current power delivered,
and extended state information.
Acked-by: Oleksij Rempel <[email protected]>
Signed-off-by: Kory Maincent <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Expand the c33 PSE attributes with PSE class, extended state information
and power consumption.
./ynl/cli.py --spec netlink/specs/ethtool.yaml --no-schema --do pse-get
--json '{"header":{"dev-name":"eth0"}}'
{'c33-pse-actual-pw': 1700,
'c33-pse-admin-state': 3,
'c33-pse-pw-class': 4,
'c33-pse-pw-d-status': 4,
'header': {'dev-index': 4, 'dev-name': 'eth0'}}
./ynl/cli.py --spec netlink/specs/ethtool.yaml --no-schema --do pse-get
--json '{"header":{"dev-name":"eth0"}}'
{'c33-pse-admin-state': 3,
'c33-pse-ext-state': 'mr-mps-valid',
'c33-pse-ext-substate': 2,
'c33-pse-pw-d-status': 2,
'header': {'dev-index': 4, 'dev-name': 'eth0'}}
Signed-off-by: Kory Maincent <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
This update expands the status information provided by ethtool for PSE c33.
It includes details such as the detected class, current power delivered,
and extended state information.
Reviewed-by: Oleksij Rempel <[email protected]>
Signed-off-by: Kory Maincent <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Loss recovery undo_retrans bookkeeping had a long-standing bug where a
DSACK from a spurious TLP retransmit packet could cause an erroneous
undo of a fast recovery or RTO recovery that repaired a single
really-lost packet (in a sequence range outside that of the TLP
retransmit). Basically, because the loss recovery state machine didn't
account for the fact that it sent a TLP retransmit, the DSACK for the
TLP retransmit could erroneously be implicitly be interpreted as
corresponding to the normal fast recovery or RTO recovery retransmit
that plugged a real hole, thus resulting in an improper undo.
For example, consider the following buggy scenario where there is a
real packet loss but the congestion control response is improperly
undone because of this bug:
+ send packets P1, P2, P3, P4
+ P1 is really lost
+ send TLP retransmit of P4
+ receive SACK for original P2, P3, P4
+ enter fast recovery, fast-retransmit P1, increment undo_retrans to 1
+ receive DSACK for TLP P4, decrement undo_retrans to 0, undo (bug!)
+ receive cumulative ACK for P1-P4 (fast retransmit plugged real hole)
The fix: when we initialize undo machinery in tcp_init_undo(), if
there is a TLP retransmit in flight, then increment tp->undo_retrans
so that we make sure that we receive a DSACK corresponding to the TLP
retransmit, as well as DSACKs for all later normal retransmits, before
triggering a loss recovery undo. Note that we also have to move the
line that clears tp->tlp_high_seq for RTO recovery, so that upon RTO
we remember the tp->tlp_high_seq value until tcp_init_undo() and clear
it only afterward.
Also note that the bug dates back to the original 2013 TLP
implementation, commit 6ba8a3b19e76 ("tcp: Tail loss probe (TLP)").
However, this patch will only compile and work correctly with kernels
that have tp->tlp_retrans, which was added only in v5.8 in 2020 in
commit 76be93fc0702 ("tcp: allow at most one TLP probe per flight").
So we associate this fix with that later commit.
Fixes: 76be93fc0702 ("tcp: allow at most one TLP probe per flight")
Signed-off-by: Neal Cardwell <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Cc: Yuchung Cheng <[email protected]>
Cc: Kevin Yang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Adrian Moreno says:
====================
net: openvswitch: Add sample multicasting.
** Background **
Currently, OVS supports several packet sampling mechanisms (sFlow,
per-bridge IPFIX, per-flow IPFIX). These end up being translated into a
userspace action that needs to be handled by ovs-vswitchd's handler
threads only to be forwarded to some third party application that
will somehow process the sample and provide observability on the
datapath.
A particularly interesting use-case is controller-driven
per-flow IPFIX sampling where the OpenFlow controller can add metadata
to samples (via two 32bit integers) and this metadata is then available
to the sample-collecting system for correlation.
** Problem **
The fact that sampled traffic share netlink sockets and handler thread
time with upcalls, apart from being a performance bottleneck in the
sample extraction itself, can severely compromise the datapath,
yielding this solution unfit for highly loaded production systems.
Users are left with little options other than guessing what sampling
rate will be OK for their traffic pattern and system load and dealing
with the lost accuracy.
Looking at available infrastructure, an obvious candidated would be
to use psample. However, it's current state does not help with the
use-case at stake because sampled packets do not contain user-defined
metadata.
** Proposal **
This series is an attempt to fix this situation by extending the
existing psample infrastructure to carry a variable length
user-defined cookie.
The main existing user of psample is tc's act_sample. It is also
extended to forward the action's cookie to psample.
Finally, a new OVS action (OVS_SAMPLE_ATTR_PSAMPLE) is created.
It accepts a group and an optional cookie and uses psample to
multicast the packet and the metadata.
====================
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Add a test to verify sampling packets via psample works.
In order to do that, create a subcommand in ovs-dpctl.py to listen to
on the psample multicast group and print samples.
Reviewed-by: Aaron Conole <[email protected]>
Tested-by: Ilya Maximets <[email protected]>
Signed-off-by: Adrian Moreno <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The trunc action was supported decode-able but not parse-able. Add
support for parsing the action string.
Reviewed-by: Aaron Conole <[email protected]>
Signed-off-by: Adrian Moreno <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The userspace action lacks parsing support plus it contains a bug in the
name of one of its attributes.
This patch makes userspace action work.
Reviewed-by: Aaron Conole <[email protected]>
Signed-off-by: Adrian Moreno <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Add sample and psample action support to ovs-dpctl.py.
Refactor common attribute parsing logic into an external function.
Reviewed-by: Aaron Conole <[email protected]>
Signed-off-by: Adrian Moreno <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
When a packet sample is observed, the sampling rate that was used is
important to estimate the real frequency of such event.
Store the probability of the parent sample action in the skb's cb area
and use it in psample action to pass it down to psample module.
Reviewed-by: Aaron Conole <[email protected]>
Acked-by: Eelco Chaudron <[email protected]>
Reviewed-by: Ilya Maximets <[email protected]>
Signed-off-by: Adrian Moreno <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Add support for a new action: psample.
This action accepts a u32 group id and a variable-length cookie and uses
the psample multicast group to make the packet available for
observability.
The maximum length of the user-defined cookie is set to 16, same as
tc_cookie, to discourage using cookies that will not be offloadable.
Reviewed-by: Michal Kubiak <[email protected]>
Reviewed-by: Aaron Conole <[email protected]>
Reviewed-by: Ilya Maximets <[email protected]>
Acked-by: Eelco Chaudron <[email protected]>
Signed-off-by: Adrian Moreno <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Although not explicitly documented in the psample module itself, the
definition of PSAMPLE_ATTR_SAMPLE_RATE seems inherited from act_sample.
Quoting tc-sample(8):
"RATE of 100 will lead to an average of one sampled packet out of every
100 observed."
With this semantics, the rates that we can express with an unsigned
32-bits number are very unevenly distributed and concentrated towards
"sampling few packets".
For example, we can express a probability of 2.32E-8% but we
cannot express anything between 100% and 50%.
For sampling applications that are capable of sampling a decent
amount of packets, this sampling rate semantics is not very useful.
Add a new flag to the uAPI that indicates that the sampling rate is
expressed in scaled probability, this is:
- 0 is 0% probability, no packets get sampled.
- U32_MAX is 100% probability, all packets get sampled.
Reviewed-by: Aaron Conole <[email protected]>
Acked-by: Eelco Chaudron <[email protected]>
Reviewed-by: Ido Schimmel <[email protected]>
Signed-off-by: Adrian Moreno <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
If nobody is listening on the multicast group, generating the sample,
which involves copying packet data, seems completely unnecessary.
Return fast in this case.
Reviewed-by: Aaron Conole <[email protected]>
Acked-by: Eelco Chaudron <[email protected]>
Reviewed-by: Ido Schimmel <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Signed-off-by: Adrian Moreno <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
If the action has a user_cookie, pass it along to the sample so it can
be easily identified.
Reviewed-by: Michal Kubiak <[email protected]>
Reviewed-by: Aaron Conole <[email protected]>
Acked-by: Eelco Chaudron <[email protected]>
Reviewed-by: Ido Schimmel <[email protected]>
Signed-off-by: Adrian Moreno <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Add a user cookie to the sample metadata so that sample emitters can
provide more contextual information to samples.
If present, send the user cookie in a new attribute:
PSAMPLE_ATTR_USER_COOKIE.
Reviewed-by: Michal Kubiak <[email protected]>
Acked-by: Eelco Chaudron <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Reviewed-by: Ido Schimmel <[email protected]>
Signed-off-by: Adrian Moreno <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Implement operations to get and set flow-control link parameters.
Both is done by simply calling phylink_ethtool_{get,set}_pauseparam().
Fix whitespace in mtk_ethtool_ops while at it.
Signed-off-by: Daniel Golle <[email protected]>
Reviewed-by: Michal Kubiak <[email protected]>
Reviewed-by: Russell King (Oracle) <[email protected]>
Tested-by: Rui Salvaterra <[email protected]>
Link: https://patch.msgid.link/e3ece47323444631d6cb479f32af0dfd6d145be0.1720088047.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Currently, kprobe event checks whether the target symbol name is unique
or not, so that it does not put a probe on an unexpected place. But this
skips the check if the target is on a module because the module may not
be loaded.
To fix this issue, this patch checks the number of probe target symbols
in a target module when the module is loaded. If the probe is not on the
unique name symbols in the module, it will be rejected at that point.
Note that the symbol which has a unique name in the target module,
it will be accepted even if there are same-name symbols in the
kernel or other modules,
Link: https://lore.kernel.org/all/172016348553.99543.2834679315611882137.stgit@devnote2/
Signed-off-by: Masami Hiramatsu (Google) <[email protected]>
Reviewed-by: Steven Rostedt (Google) <[email protected]>
|