| Age | Commit message (Collapse) | Author | Files | Lines |
|
There are many generations of omaps to maintain, and I will be only active
as a hobbyist with time permitting. Let's add more maintainers to ensure
continued Linux support.
TI is interested in maintaining the active SoCs such as am3, am4 and
dra7. And the hobbyists are interested in maintaining some of the older
devices, mainly based on omap3 and 4 SoCs.
Kevin and Roger have agreed to maintain the active TI parts. Both Kevin
and Roger have been working on the omap variants for a long time, and
have a good understanding of the hardware.
Aaro and Andreas have agreed to maintain the community devices. Both Aaro
and Andreas have long experience on working with the earlier TI SoCs.
While at it, let's also change me to be a reviewer for the omap1, and
drop the link to my old omap web page.
Signed-off-by: Tony Lindgren <[email protected]>
Acked-by: Kevin Hilman <[email protected]>
Acked-by: Aaro Koskinen <[email protected]>
Acked-by: Roger Quadros <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
With the introduction of binder_available_for_proc_work_ilocked() in
commit 1b77e9dcc3da ("ANDROID: binder: remove proc waitqueue") a binder
thread can only "wait_for_proc_work" after its thread->looper has been
marked as BINDER_LOOPER_STATE_{ENTERED|REGISTERED}.
This means an unregistered reader risks waiting indefinitely for work
since it never gets added to the proc->waiting_threads. If there are no
further references to its waitqueue either the task will hang. The same
applies to readers using the (e)poll interface.
I couldn't find the rationale behind this restriction. So this patch
restores the previous behavior of allowing unregistered threads to
"wait_for_proc_work". Note that an error message for this scenario,
which had previously become unreachable, is now re-enabled.
Fixes: 1b77e9dcc3da ("ANDROID: binder: remove proc waitqueue")
Cc: [email protected]
Cc: Martijn Coenen <[email protected]>
Cc: Arve Hjønnevåg <[email protected]>
Signed-off-by: Carlos Llamas <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
'sdhci-esdhc-imx' driver
Since NXP S32G2 and S32G3 SoCs share the SDHCI controller with
I.MX platforms it would be valuable to add '[email protected]' as a
relevant mailing list in this area.
Signed-off-by: Ciprian Costea <[email protected]>
Acked-by: Adrian Hunter <[email protected]>
Acked-by: Haibo Chen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Ulf Hansson <[email protected]>
|
|
The I.MX SDHCI driver assumes that the frequency of the 'per' clock
can be obtained even on disabled clocks, which is not always the case.
According to 'clk_get_rate' documentation, it is only valid
once the clock source has been enabled.
Signed-off-by: Ciprian Costea <[email protected]>
Reviewed-by: Haibo Chen <[email protected]>
Acked-by: Adrian Hunter <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Ulf Hansson <[email protected]>
|
|
In case of S32G based platforms, GPIO CD used for card detect
wake mechanism is not available.
For this scenario the newly introduced flag
'ESDHC_FLAG_SKIP_CD_WAKE' is used.
Signed-off-by: Ciprian Costea <[email protected]>
Reviewed-by: Haibo Chen <[email protected]>
Acked-by: Adrian Hunter <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Ulf Hansson <[email protected]>
|
|
There is no reason to restrict access to this attribute, as it merely
reports whether crash elfcorehdr is automatically updated on CPU hot
plug/unplug and/or online/offline events.
Note that since commit 79365026f8694 ("crash: add a new kexec flag for
hotplug support"), this maps to the same flag which is world-accessible
through /sys/devices/system/memory/crash_hotplug.
Signed-off-by: Petr Tesarik <[email protected]>
Acked-by: Baoquan He <[email protected]>
Acked-by: Sourabh Jain <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The Lenovo Yoga C630 Embedded Controller is only present on the Qualcomm
Snapdragon-based Lenovo Yoga C630 laptop. Hence add a dependency on
ARCH_QCOM, to prevent asking the user about this driver when configuring
a kernel without Qualcomm SoC support.
Signed-off-by: Geert Uytterhoeven <[email protected]>
Reviewed-by: Hans de Goede <[email protected]>
Link: https://lore.kernel.org/r/0e4c9ffdc8a5caffcda2afb8d5480900f7adebf6.1720707932.git.geert+renesas@glider.be
Reviewed-by: Ilpo Järvinen <[email protected]>
Signed-off-by: Ilpo Järvinen <[email protected]>
|
|
Log errors are the most widely used mechanism for reporting issues in
the kernel. When an error is logged using the device helpers, eg
dev_err(), it gets metadata attached that identifies the subsystem and
device where the message is coming from. Introduce a new test that makes
use of that metadata to report which devices logged errors (or more
critical messages).
Signed-off-by: Nícolas F. R. A. Prado <[email protected]>
Acked-by: Shuah Khan <[email protected]>
Acked-by: Greg Kroah-Hartman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Move the ksft python module, which provides generic helpers for
kselftests, to a common directory so it can be more easily shared
between different tests.
Signed-off-by: Nícolas F. R. A. Prado <[email protected]>
Acked-by: Shuah Khan <[email protected]>
Acked-by: Greg Kroah-Hartman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Move the discoverable devices test to a subdirectory to allow other
related tests to be added to the devices directory.
Signed-off-by: Nícolas F. R. A. Prado <[email protected]>
Acked-by: Shuah Khan <[email protected]>
Acked-by: Greg Kroah-Hartman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The Acer Aspire 1 Embedded Controller is only present on the Qualcomm
Snapdragon-based Acer Aspire 1 laptop. Hence add a dependency on
ARCH_QCOM, to prevent asking the user about this driver when configuring
a kernel without Qualcomm SoC support.
Signed-off-by: Geert Uytterhoeven <[email protected]>
Reviewed-by: Hans de Goede <[email protected]>
Acked-by: Nikita Travkin <[email protected]>
Link: https://lore.kernel.org/r/f5f38709c01d369ed9e375ceb2a9a12986457a1a.1720707932.git.geert+renesas@glider.be
Reviewed-by: Ilpo Järvinen <[email protected]>
Signed-off-by: Ilpo Järvinen <[email protected]>
|
|
The test case logic is implemented by the functions compiled as
part of the core Xe driver module and then exported to build and
register the test suite in the live test module.
But we don't need to export individual test case functions, we may
just export the entire test suite. And we don't need to register
this test suite in a separate file, it can be done in the main
file of the live test module.
Signed-off-by: Michal Wajdeczko <[email protected]>
Reviewed-by: Lucas De Marchi <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
The test case logic is implemented by the functions compiled as
part of the core Xe driver module and then exported to build and
register the test suite in the live test module.
But we don't need to export individual test case functions, we may
just export the entire test suite. And we don't need to register
this test suite in a separate file, it can be done in the main
file of the live test module.
Signed-off-by: Michal Wajdeczko <[email protected]>
Reviewed-by: Lucas De Marchi <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
The test case logic is implemented by the functions compiled as
part of the core Xe driver module and then exported to build and
register the test suite in the live test module.
But we don't need to export individual test case functions, we may
just export the entire test suite. And we don't need to register
this test suite in a separate file, it can be done in the main
file of the live test module.
Signed-off-by: Michal Wajdeczko <[email protected]>
Reviewed-by: Lucas De Marchi <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
The test case logic is implemented by the functions compiled as
part of the core Xe driver module and then exported to build and
register the test suite in the live test module.
But we don't need to export individual test case functions, we may
just export the entire test suite. And we don't need to register
this test suite in a separate file, it can be done in the main
file of the live test module.
Signed-off-by: Michal Wajdeczko <[email protected]>
Reviewed-by: Lucas De Marchi <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
DPI hardware is an on-chip PCIe device on Marvell's arm64 SoC
platforms. As Arnd suggested, CN10K belongs to ARCH_THUNDER
lineage.
Patch makes mrvl_cn10k_dpi driver dependent on CONFIG_ARCH_THUNDER.
Signed-off-by: Vamsi Attunuru <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/virtio/virtio_dma_buf.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
With ARCH=powerpc, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/char/agp/uninorth-agp.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <[email protected]>
Reviewed-by: Jeffrey Hugo <[email protected]>
Link: https://lore.kernel.org/r/20240615-md-powerpc-drivers-char-agp-v1-1-b79bfd07da42@quicinc.com
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/spmi/hisi-spmi-controller.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/spmi/spmi-pmic-arb.o
Add the missing invocations of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
It's unused and can be replaced with VISIBLE_IF_KUNIT if needed.
Signed-off-by: Michal Wajdeczko <[email protected]>
Reviewed-by: Lucas De Marchi <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
We shouldn't use custom helper if there is a official one.
Signed-off-by: Michal Wajdeczko <[email protected]>
Reviewed-by: Lucas De Marchi <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
The remove callback's return value is about to change from int to void,
this is done by commit 0edb555a65d1 ("platform: Make
platform_driver::remove() return void"). Prepare for merging the patch by
switching the PiSP driver from remove to remove_new callback.
Fixes: 12187bd5d4f8 ("media: raspberrypi: Add support for PiSP BE")
Signed-off-by: Stephen Rothwell <[email protected]>
Acked-by: Naushir Patuck <[email protected]>
Acked-by: Jacopo Mondi <[email protected]>
Signed-off-by: Sakari Ailus <[email protected]>
Reviewed-by: Uwe Kleine-König <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
|
|
Complete the pisp_be_config strcture by adding fields that even if not
written to the HW are relevant to complete the uAPI and put it in par
with the BSP driver.
Fixes: c6c49bac8770 ("media: uapi: Add Raspberry Pi PiSP Back End uAPI")
Signed-off-by: Jacopo Mondi <[email protected]>
Signed-off-by: Sakari Ailus <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
|
|
The order of the members of pisp_be_tiles_config is relevant
as the driver logic assumes 'config' to be at offset 0.
Re-sort the member to match the driver's expectations.
Fixes: c6c49bac8770 ("media: uapi: Add Raspberry Pi PiSP Back End uAPI")
Signed-off-by: Jacopo Mondi <[email protected]>
Acked-by: Naushir Patuck <[email protected]>
Signed-off-by: Sakari Ailus <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
|
|
The macro used to inspect an image format characteristic use a mixture
of capitalized and non-capitalized letters, which is rather unusual for
the Linux kernel style.
Capitalize all identifiers.
Fixes: c6c49bac8770 ("media: uapi: Add Raspberry Pi PiSP Back End uAPI")
Signed-off-by: Jacopo Mondi <[email protected]>
Signed-off-by: Sakari Ailus <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
|
|
Add definition and test for 32-bits image formats to the pisp_common.h
uAPI header.
Fixes: c6c49bac8770 ("media: uapi: Add Raspberry Pi PiSP Back End uAPI")
Signed-off-by: Jacopo Mondi <[email protected]>
Acked-by: David Plowman <[email protected]>
Signed-off-by: Sakari Ailus <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
|
|
The pisp_be_config.h uAPI header file contains a bit-field definition
that uses the BIT() helper macro.
As the BIT() identifier is not defined in userspace, drop it from the
uAPI header.
Fixes: c6c49bac8770 ("media: uapi: Add Raspberry Pi PiSP Back End uAPI")
Signed-off-by: Jacopo Mondi <[email protected]>
Reviewed-by: Tomi Valkeinen <[email protected]>
Signed-off-by: Sakari Ailus <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
|
|
While efi_memory_attributes_table_t::entry isn't used directly as an
array, it is used as a base for pointer arithmetic. The type is wrong
as it's not technically an array of efi_memory_desc_t's; they could be
larger. Regardless, leave the type unchanged and remove the old style
"0" array size. Additionally replace the open-coded entry offset code
with the existing efi_memdesc_ptr() helper.
Signed-off-by: Kees Cook <[email protected]>
Signed-off-by: Ard Biesheuvel <[email protected]>
|
|
The "early" part of the helper's name isn't accurate[1]. Drop it in
preparation for adding a new (not early) usage.
Suggested-by: Ard Biesheuvel <[email protected]>
Link: https://lore.kernel.org/lkml/CAMj1kXEyDjH0uu3Z4eBesV3PEnKGi5ArXXMp7R-hn8HdRytiPg@mail.gmail.com [1]
Signed-off-by: Kees Cook <[email protected]>
Signed-off-by: Ard Biesheuvel <[email protected]>
|
|
Documentation say that clock internal config needs to be set BEFORE chip
is enabled. Align code to this and move the CHIP enable after the CHIP
is configured.
While at it also make use of STATUS reg and check when STARTUP is
completed instead of sleep for 1-2 ms.
Signed-off-by: Christian Marangi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Lee Jones <[email protected]>
|
|
Better handle enabling clock internal setting. In further testing it was
notice that internal clock config MUST be set before clock output config
or the LED CHIP might stop working.
This wasn't documented and was actually found on devices that have 2
chip chained where one chip provide clock for the other.
Signed-off-by: Christian Marangi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Lee Jones <[email protected]>
|
|
Remove extra x from driver name as this was a typo from copy-paste
error.
Signed-off-by: Christian Marangi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Lee Jones <[email protected]>
|
|
Commit 9a427556fb8e ("vmlinux.lds.h: catch compound literals into
data and BSS") added catches for .data..L* and .rodata..L* but missed
.bss..L*
Since commit 5431fdd2c181 ("ptrace: Convert ptrace_attach() to use
lock guards") the following appears at build:
LD .tmp_vmlinux.kallsyms1
powerpc64-linux-ld: warning: orphan section `.bss..Lubsan_data33' from `kernel/ptrace.o' being placed in section `.bss..Lubsan_data33'
NM .tmp_vmlinux.kallsyms1.syms
KSYMS .tmp_vmlinux.kallsyms1.S
AS .tmp_vmlinux.kallsyms1.S
LD .tmp_vmlinux.kallsyms2
powerpc64-linux-ld: warning: orphan section `.bss..Lubsan_data33' from `kernel/ptrace.o' being placed in section `.bss..Lubsan_data33'
NM .tmp_vmlinux.kallsyms2.syms
KSYMS .tmp_vmlinux.kallsyms2.S
AS .tmp_vmlinux.kallsyms2.S
LD vmlinux
powerpc64-linux-ld: warning: orphan section `.bss..Lubsan_data33' from `kernel/ptrace.o' being placed in section `.bss..Lubsan_data33'
Lets add .bss..L* to BSS_MAIN macro to catch those sections into BSS.
Fixes: 9a427556fb8e ("vmlinux.lds.h: catch compound literals into data and BSS")
Signed-off-by: Christophe Leroy <[email protected]>
Reported-by: kernel test robot <[email protected]>
Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
The to-be-fixed commit rightfully prevented that the registers will be
cleared. However, the index must be cleared. Otherwise a read message
will re-issue the last work. Fix it and add a comment describing the
situation.
Fixes: c422b6a63024 ("i2c: testunit: don't erase registers after STOP")
Signed-off-by: Wolfram Sang <[email protected]>
Reviewed-by: Andi Shyti <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
|
|
esp_xmit() is already able to handle UDP encapsulation through the call to
esp_output_head(). However, the ESP header and the outer IP header
are not correct and need to be corrected.
Test: Enabled both dir=in/out IPsec crypto offload, and verified IPv4
UDP-encapsulated ESP packets on both wifi/cellular network
Signed-off-by: Mike Yu <[email protected]>
Signed-off-by: Steffen Klassert <[email protected]>
|
|
If xfrm_input() is called with UDP_ENCAP_ESPINUDP, the packet is
already processed in UDP layer that removes the UDP header.
Therefore, there should be no much difference to treat it as an
ESP packet in the XFRM stack.
Test: Enabled dir=in IPsec crypto offload, and verified IPv4
UDP-encapsulated ESP packets on both wifi/cellular network
Signed-off-by: Mike Yu <[email protected]>
Signed-off-by: Steffen Klassert <[email protected]>
|
|
Unblock this limitation so that SAs with encapsulation specified
can be passed to HW drivers. HW drivers can still reject the SA
in their implementation of xdo_dev_state_add if the encapsulation
is not supported.
Test: Verified on Android device
Signed-off-by: Mike Yu <[email protected]>
Signed-off-by: Steffen Klassert <[email protected]>
|
|
IPsec crypt offload supports outbound IPv6 ESP packets, but it doesn't
support inbound IPv6 ESP packets.
This change enables the crypto offload for inbound IPv6 ESP packets
that are not handled through GRO code path. If HW drivers add the
offload information to the skb, the packet will be handled in the
crypto offload rx code path.
Apart from the change in crypto offload rx code path, the change
in xfrm_policy_check is also needed.
Exampe of RX data path:
+-----------+ +-------+
| HW Driver |-->| wlan0 |--------+
+-----------+ +-------+ |
v
+---------------+ +------+
+------>| Network Stack |-->| Apps |
| +---------------+ +------+
| |
| v
+--------+ +------------+
| ipsec1 |<--| XFRM Stack |
+--------+ +------------+
Test: Enabled both in/out IPsec crypto offload, and verified IPv6
ESP packets on Android device on both wifi/cellular network
Signed-off-by: Mike Yu <[email protected]>
Signed-off-by: Steffen Klassert <[email protected]>
|
|
block
It would be possible to put any statement in TP_fast_assign().
This commit obsoletes the helper function and put its statements to
TP_fast_assign() for the code simplicity.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Sakamoto <[email protected]>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.10-2024-07-11:
amdgpu:
- PSR-SU fix
- Reseved VMID fix
Signed-off-by: Dave Airlie <[email protected]>
From: Alex Deucher <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
UAPI Changes:
- Use write-back caching mode for system memory on DGFX (Thomas)
Driver Changes:
- Do not leak object when finalizing hdcp gsc (Nirmoy)
Signed-off-by: Dave Airlie <[email protected]>
From: Lucas De Marchi <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/vgqz35btnxdddko3byrgww5ii36wig2tvondg2p3j3b3ourj4i@rqgolll3wwkh
|
|
Prior to commit dc6fcaaba5a5 ("drm/omap: Allow build with
COMPILE_TEST=y"), it was only possible to build the omapdrm driver with
a 4KB page size. After that change, when the PAGE_SIZE is 64KB or
larger, clang points out that the driver has some assumptions around the
page size implicitly by passing PAGE_SIZE to a parameter with a type of
u16:
drivers/gpu/drm/omapdrm/omap_gem.c:758:7: error: implicit conversion from 'unsigned long' to 'u16' (aka 'unsigned short') changes value from 65536 to 0 [-Werror,-Wconstant-conversion]
757 | block = tiler_reserve_2d(fmt, omap_obj->width, omap_obj->height,
| ~~~~~~~~~~~~~~~~
758 | PAGE_SIZE);
| ^~~~~~~~~
arch/powerpc/include/asm/page.h:25:34: note: expanded from macro 'PAGE_SIZE'
25 | #define PAGE_SIZE (ASM_CONST(1) << PAGE_SHIFT)
| ~~~~~~~~~~~~~^~~~~~~~~~~~~
drivers/gpu/drm/omapdrm/omap_gem.c:1504:44: error: implicit conversion from 'unsigned long' to 'u16' (aka 'unsigned short') changes value from 65536 to 0 [-Werror,-Wconstant-conversion]
1504 | block = tiler_reserve_2d(fmts[i], w, h, PAGE_SIZE);
| ~~~~~~~~~~~~~~~~ ^~~~~~~~~
arch/powerpc/include/asm/page.h:25:34: note: expanded from macro 'PAGE_SIZE'
25 | #define PAGE_SIZE (ASM_CONST(1) << PAGE_SHIFT)
| ~~~~~~~~~~~~~^~~~~~~~~~~~~
2 errors generated.
As there is a lot of use of a u16 type throughout this driver and it
will only ever be run on hardware that has a 4KB page size, just
restrict compile testing to when the page size is less than 64KB (as no
other issues have been discussed and it keeps compile testing relatively
more available).
Signed-off-by: Nathan Chancellor <[email protected]>
Signed-off-by: Dave Airlie <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/20240620-omapdrm-restrict-compile-test-to-sub-64kb-page-size-v1-1-5e56de71ffca@kernel.org
|
|
When handling colliding L2TPv3 session IDs, we use the existing
session IDR entry and link the new session on that using
session->coll_list. However, when using an existing IDR entry, we must
not do the idr_replace step.
Fixes: aa5e17e1f5ec ("l2tp: store l2tpv3 sessions in per-net IDR")
Signed-off-by: James Chapman <[email protected]>
Signed-off-by: Tom Parkin <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-next
UAPI Changes:
- Rename xe perf layer as xe observation layer (Ashutosh)
Driver Changes:
- Drop trace_xe_hw_fence_free (Brost)
Signed-off-by: Dave Airlie <[email protected]>
From: Rodrigo Vivi <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
A fix for fbdev on big endian systems, a condition fix for a sharp panel
at removal, and a fix for qxl to prevent unpinned buffer access under
certain conditions.
Signed-off-by: Dave Airlie <[email protected]>
From: Maxime Ripard <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/20240711-benign-rich-mouflon-2eeafe@houat
|
|
link_is_up() and tipc_link_is_up() have the same functionality.
Consolidate these functions.
Signed-off-by: Shigeru Yoshida <[email protected]>
Reviewed-by: Tung Nguyen <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
struct tipc_name_table in core.h is not used. Remove this declaration.
Signed-off-by: Shigeru Yoshida <[email protected]>
Reviewed-by: Tung Nguyen <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Commit 732b32daef80 ("powerpc: Remove core support for 40x") removed 40x.
Update documentation accordingly.
Signed-off-by: Christophe Leroy <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://msgid.link/c2d64bebc514ca892a12e51a68821a6317048d3a.1720694954.git.christophe.leroy@csgroup.eu
|
|
Remove stale references to 40x.
Fixes: e939da89d024 ("powerpc: Remove 40x from Kconfig and defconfig")
Fixes: 548f5244f106 ("powerpc/40x: Remove EP405")
Signed-off-by: Christophe Leroy <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://msgid.link/ab30ae302783d8617d407864b92db1b926ab5ab9.1720694914.git.christophe.leroy@csgroup.eu
|
|
Breno Leitao says:
====================
netconsole: improve code clarity
These changes aim to enhance the reliability of netconsole by
eliminating the potential race condition and improve maintainability
by making the code more straightforward to understand and modify.
====================
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|