aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2024-07-23drm/amd/display: Check phantom_stream before it is usedAlex Hung1-0/+3
dcn32_enable_phantom_stream can return null, so returned value must be checked before used. This fixes 1 NULL_RETURNS issue reported by Coverity. Reviewed-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Jerry Zuo <[email protected]> Signed-off-by: Alex Hung <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-23drm/amd/display: Check null-initialized variablesAlex Hung1-3/+4
[WHAT & HOW] drr_timing and subvp_pipe are initialized to null and they are not always assigned new values. It is necessary to check for null before dereferencing. This fixes 2 FORWARD_NULL issues reported by Coverity. Reviewed-by: Nevenko Stupar <[email protected]> Reviewed-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Jerry Zuo <[email protected]> Signed-off-by: Alex Hung <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-23drm/amd/display: Initialize denominators' default to 1Alex Hung3-4/+4
[WHAT & HOW] Variables used as denominators and maybe not assigned to other values, should not be 0. Change their default to 1 so they are never 0. This fixes 10 DIVIDE_BY_ZERO issues reported by Coverity. Reviewed-by: Harry Wentland <[email protected]> Signed-off-by: Jerry Zuo <[email protected]> Signed-off-by: Alex Hung <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-23drm/amd/display: Refactoring OPPRevalla Hari Krishna7-2/+17
[Why] To refactor OPP files [How] Moved opp related files to specific opp folder and updated Makefiles. Acked-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Jerry Zuo <[email protected]> Signed-off-by: Revalla Hari Krishna <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-23drm/amd/display: Fix DP-DVI dongle hotplugGabe Teeger1-4/+1
[why] Hotplugging with a DVI-DP dongle on pre-rdna embedded platform working about half the time. The regression was found to be the setting of link->type here. [what] Reverts fix besides the logging added. Reviewed-by: Wenjing Liu <[email protected]> Signed-off-by: Jerry Zuo <[email protected]> Signed-off-by: Gabe Teeger <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-23drm/amd/display: Disable subvp based on HW cursor requirementAlvin Lee3-1/+11
[Description] - There are situations where HW cursor is required - In these scenarios we should disable subvp based on the HW cursor requirement Reviewed-by: Dillon Varone <[email protected]> Signed-off-by: Jerry Zuo <[email protected]> Signed-off-by: Alvin Lee <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-23drm/amd/display: When resync fifo ensure to use correct pipe ctxAlvin Lee6-12/+30
We resync the FIFO after each pipe update in apply_ctx_to_hw. However, this means that some pipes (in hardware) are based on the new context and some are based on the current_state (since the pipes are updated on at a time). In this case we must ensure to use the pipe_ctx that's currently still configured in hardware when turning off / on OTG's and reconfiguring ODM during the resync. Reviewed-by: Nicholas Kazlauskas <[email protected]> Signed-off-by: Jerry Zuo <[email protected]> Signed-off-by: Alvin Lee <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-23drm/amd/display: Add option to allow transition when odm is forcedSridevi Arvindekar2-1/+8
Added option to allow transition for forced odm. Add the variation to the nightly run. Reviewed-by: Wenjing Liu <[email protected]> Signed-off-by: Jerry Zuo <[email protected]> Signed-off-by: Sridevi Arvindekar <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-23drm/amd/display: avoid disable otg when dig was disabledJingwen Zhu3-3/+25
[Why] This is a workaround for an dcn3.1 hang that happens if otg dispclk is ramped while otg is on and stream enc is off. But this w/a should not trigger when we have a dig active. [How] Avoid disable otg when dig FE/BE FIFO was not switched. Acked-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Jerry Zuo <[email protected]> Signed-off-by: Jingwen Zhu <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-23drm/amd/display: Implement bias and scale pre sclRelja Vojvodic7-14/+43
why: New scaler needs the input to be full range color space. This will also fix issues that come up due to not having a predefined limited color space matrix for certain color spaces how: Use bias and scale HW to expand the range of limited color spaces to full before the scaler Reviewed-by: Krunoslav Kovac <[email protected]> Signed-off-by: Jerry Zuo <[email protected]> Signed-off-by: Relja Vojvodic <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-23drm/amd/display: apply vmin optimization even if it doesn't reach vmin levelWenjing Liu2-7/+20
[why] Based on power measurement result, in most cases when display clock is higher than Vmin display clock, lowering display clock using dynamic ODM will improve overall power consumption by 0 to 4 watts even if we can't reach Vmin. [how] Allow vmin optimization applied even if dispclk can't reach Vmin. Reviewed-by: Jun Lei <[email protected]> Signed-off-by: Jerry Zuo <[email protected]> Signed-off-by: Wenjing Liu <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-23drm/amd/display: fix dscclk programming sequence on DCN401Wenjing Liu8-59/+58
[why] The mux to switch between refclk and dto_dsc_clk is non double buffered. However dto dsc clk's phase and modulo divider registers are currently configured as double buffered update. This causes a problem when we switch to use dto dsc clk and program phase and modulo in the same sequence. In this sequence dsc clk is switched to dto but the clock divider programming doesn't take effect until next frame. When we try to program DSCC registers, SMN bus will hang because dto dsc clk divider phase is set to 0. [how] Configure phase and modulo to take effect immediately. Always switch to dto dsc clk before DSC clock is unagted. Switch back to refclk after DSC clock is gated. Acked-by: Rodrigo Siqueira <[email protected]> Reviewed-by: Jerry Zuo <[email protected]> Signed-off-by: Wenjing Liu <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-23drm/amd/display: Revert "Check HDCP returned status"Alex Hung1-9/+9
This reverts commit 5d93060d430b359e16e7c555c8f151ead1ac614b due to a power consumption regression. Reviewed-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Jerry Zuo <[email protected]> Signed-off-by: Alex Hung <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-23drm/amd/display: Replace assert with error message in dp_retrieve_lttpr_cap()Roman Li1-1/+5
[Why] When assert in dp_retrieve_lttpr_cap() is hit, dmesg has traces like: RIP: 0010:dp_retrieve_lttpr_cap+0xcc/0x1a0 [amdgpu] Call Trace: <TASK> dp_retrieve_lttpr_cap+0xcc/0x1a0 [amdgpu] report_bug+0x1e8/0x240 handle_bug+0x46/0x80 link_detect+0x35/0x580 [amdgpu] It happens when LTTPRs fail to increment dpcd repeater count. We have a recovery action in place for such cases. Assert is misleading, an indicative error in dmesg is more useful. [How] Remove ASSERT and use DC_LOG_ERROR instead. Reviewed-by: Michael Strauss <[email protected]> Signed-off-by: Jerry Zuo <[email protected]> Signed-off-by: Roman Li <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-23drm/amd/display: Added logging for automated DPM testingRyan Seto7-57/+237
[Why] Added clock logs to automate DPM testing [How] Added logs and helper functions to output clocks Co-authored-by: Ryan Seto <[email protected]> Reviewed-by: Alvin Lee <[email protected]> Signed-off-by: Jerry Zuo <[email protected]> Signed-off-by: Ryan Seto <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-23drm/amd/display: Don't consider cursor for no plane case in DML1Alvin Lee1-0/+2
[Description] For no plane scenarios we should not consider cursor as there cannot be any cursor if there's no planes. This fixes an issue where dc_commit_streams fails due to prefetch bandwidth requirements (the display config + dummy planes + cursor causes the prefetch bandwidth to exceed what is possible). Reviewed-by: Chaitanya Dhere <[email protected]> Signed-off-by: Jerry Zuo <[email protected]> Signed-off-by: Alvin Lee <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-23drm/amd/display: quality improvements for EASF and ISHARPSamson Tam19-710/+3161
[Why] Update coefficients and LUT tables for scaler and sharpener to improve quality and support different use cases (SDR/HDR) [How] Move scaler coefficients to new file dc_spl_scl_easf_filters.c Remove older coefficients file dc_sp_scl_filters_old.c Update default taps for EASF support Update LLS policy for DON'T CARE case Update cositing offset from 0.5 to 0.25 Add support to adjust sharpness based on level, use case, and scaling ratio ( using discrete levels ) Apply sharpness to all RGB surfaces and both NV12 and P010 video ( in fullscreen only ). Upscale and 1:1 ratios only Enable scaler when sharpening 1:1 ratios Add support for coefficients that are in S1.10 format (convert to S1.12 format) Reviewed-by: Jun Lei <[email protected]> Signed-off-by: Jerry Zuo <[email protected]> Signed-off-by: Samson Tam <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-23drm/amd/display: Disable HBR audio for DP2 for certain ASICsAlvin Lee9-0/+19
[Description] Due to a HW bug, HBR audio is not supported for DP2 encoders for certain ASICs. Reviewed-by: Alvin Lee <[email protected]> Signed-off-by: Jerry Zuo <[email protected]> Signed-off-by: Alvin Lee <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-23drm/amd/display: Disable replay if VRR capability is falseTom Chung1-0/+6
[Why] The VRR need to be supported for panel replay feature. If VRR capability is false, panel replay capability also need to be disabled. [How] After update the vrr capability, the panel replay capability also need to be check if need. Reviewed-by: Wayne Lin <[email protected]> Signed-off-by: Jerry Zuo <[email protected]> Signed-off-by: Tom Chung <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-23drm/amdgpu: add print support for sdma_v_5_0 ip_dumpSunil Khatri1-0/+22
Add support for ip dump for sdma_v_5_0 in devcoredump. Signed-off-by: Sunil Khatri <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-23drm/amdgpu: Add sdma_v5_0 ip dump for devcoredumpSunil Khatri1-0/+82
Add ip dump for sdma_v5_0 for devcoredump for all instances of sdma. Signed-off-by: Sunil Khatri <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-23drm/amdgpu: add print support for sdma_v_6_0 ip_dumpSunil Khatri1-0/+22
Add print support for ip dump for sdma_v_6_0 in devcoredump. Signed-off-by: Sunil Khatri <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-23drm/amdgpu: Add sdma_v6_0 ip dump for devcoredumpSunil Khatri1-0/+90
Add ip dump for sdma_v6_0 for devcoredump for all instances of sdma. Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Sunil Khatri <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-23drm/amdgpu: fix the print message in devcoredumpSunil Khatri1-1/+1
Fix the memory type logged for gtt memory size which is wrongly logged as visible vram size. Signed-off-by: Sunil Khatri <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-23drm/amdgpu: fix the extra space between two functionsSunil Khatri1-0/+1
fix extra line space between two functions. Signed-off-by: Sunil Khatri <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-23drm/amdgpu: add print support for sdma_v_5_2 ip_dumpSunil Khatri1-0/+21
Add support for ip dump for sdma_v_5_2 in devcoredump. Signed-off-by: Sunil Khatri <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-23drm/amdgpu: Add sdma_v5_2 ip dump for devcoredumpSunil Khatri2-0/+83
Add ip dump for sdma_v5_2 for devcoredump for all instances of sdma. Signed-off-by: Sunil Khatri <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-23Merge tag 'rpmsg-v6.11' of ↵Linus Torvalds2-3/+4
git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux Pull rpmsg updates from Bjorn Andersson: - fix interrupt handling in the stm32 remoteproc driver when being attached to an already running remote processor - fix invalid kernel-doc and add missing MODULE_DESCRIPTION() in the rpmsg char driver * tag 'rpmsg-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: rpmsg: char: add missing MODULE_DESCRIPTION() macro remoteproc: stm32_rproc: Fix mailbox interrupts queuing rpmsg: char: Fix rpmsg_eptdev structure documentation
2024-07-23Merge tag 'rproc-v6.11' of ↵Linus Torvalds17-84/+414
git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux Pull remoteproc updates from Bjorn Andersson: - The maximum amount of DDR memory used by the Mediatek MT8188/MT8195 SCP is increased to handle new use cases. Handling of optional L1TCM memory is made actually optional. - An optimization is introduced to only clear the unused portion of IPI shared buffers, rather than the entire buffer before writing the message. - Detection for IPC-only mode in the TI K3 DSP remoteproc driver is corrected. The loglevel of a debug print in the same is lowered from error. - Support for attaching to an running remote processor is added to the Xilinx R5F. - An in-kernel implementation of the Qualcomm "protected domain mapper" (aka service registry) service is introduced, to remove the dependency on a userspace implementation to detect when the battery monitor and USB Type-C port manager becomes available. This is then integrated with the Qualcomm remoteproc driver. - The Qualcomm PAS remoteproc driver gains support for attempting to bust hwspinlocks held by the remote processor when it crashed/stopped. - The TI OMAP remoteproc driver is transitioned to use devres helpers for various forms of allocations. - Parsing of memory-regions in the i.MX remoteproc driver is improved to avoid a NULL pointer dereference if the phandle reference is empty. of_node reference counting is corrected in the same. * tag 'rproc-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: remoteproc: mediatek: Increase MT8188/MT8195 SCP core0 DRAM size remoteproc: k3-dsp: Fix log levels where appropriate remoteproc: xlnx: Add attach detach support remoteproc: qcom: select AUXILIARY_BUS remoteproc: k3-r5: Fix IPC-only mode detection remoteproc: mediatek: Don't attempt to remap l1tcm memory if missing remoteproc: qcom: enable in-kernel PD mapper dt-bindings: remoteproc: imx_rproc: Add minItems for power-domain remoteproc: imx_rproc: Fix refcount mistake in imx_rproc_addr_init remoteproc: omap: Use devm_rproc_add() helper remoteproc: omap: Use devm action to release reserved memory remoteproc: omap: Use devm_rproc_alloc() helper remoteproc: imx_rproc: Skip over memory region when node value is NULL dt-bindings: remoteproc: k3-dsp: Correct optional sram properties for AM62A SoCs remoteproc: qcom_q6v5_pas: Add hwspinlock bust on stop soc: qcom: smem: Add qcom_smem_bust_hwspin_lock_by_host() remoteproc: mediatek: Zero out only remaining bytes of IPI buffer
2024-07-23Merge tag 'hwlock-v6.11' of ↵Linus Torvalds5-0/+73
git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux Pull hwspinlock updates from Bjorn Andersson: "This introduces a mechanism in the hardware spinlock framework, and the Qualcomm TCSR mutex driver, for allowing clients to bust locks held by a remote processor in the event that this enters a faulty state while holding the shared lock" * tag 'hwlock-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: hwspinlock: qcom: implement bust operation hwspinlock: Introduce hwspin_lock_bust()
2024-07-23drm/dp_mst: Simplify character output in drm_dp_mst_dump_topology()Markus Elfring1-1/+1
Single characters should be put into a sequence. Thus use the corresponding function “seq_putc” for one selected call. This issue was transformed by using the Coccinelle software. Suggested-by: Christophe Jaillet <[email protected]> Signed-off-by: Markus Elfring <[email protected]> Reviewed-by: Lyude Paul <[email protected]> Signed-off-by: Lyude Paul <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-07-23Merge tag 'sh-for-v6.11-tag1' of ↵Linus Torvalds7-40/+1
git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux Pull sh updates from John Paul Adrian Glaubitz: "This is rather small this time and contains just three changes. The first change by Oscar Salvador drops support for memory hotplug and hotremove for sh as the kernel stopped supporting it on 32-bit platforms since 7ec58a2b941e ("mm/memory_hotplug: restrict CONFIG_MEMORY_HOTPLUG to 64 bit"). That then results in a follow-up change to update all affected board config files. The third change comes from Jeff Johnson which adds the missing MODULE_DESCRIPTION() macro to the push-switch driver" * tag 'sh-for-v6.11-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux: sh: push-switch: Add missing MODULE_DESCRIPTION() macro sh: config: Drop CONFIG_MEMORY_{HOTPLUG,HOTREMOVE} sh: Drop support for memory hotplug and memory hotremove
2024-07-23Merge tag 'modules-6.11-rc1' of ↵Linus Torvalds1-0/+6
git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux Pull module update from Luis Chamberlain: "This is a super boring development cycle this time around for modules, there is only one patch in this pull request. The patch deals with a corner case set of dependencies which is not resolved today to ensure users get the module they need on initramfs. Currently only one module is known to exist which needs this, however this can grow to capture other corner cases likely escaped and not reported before. The kernel change is just a section update, the real work is done and merged already on upstream kmod. This has been on linux-next for 3 weeks now" * tag 'modules-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux: module: create weak dependecies
2024-07-23clk: samsung: fix getting Exynos4 fin_pll rate from external clocksKrzysztof Kozlowski1-6/+7
Commit 0dc83ad8bfc9 ("clk: samsung: Don't register clkdev lookup for the fixed rate clocks") claimed registering clkdev lookup is not necessary anymore, but that was not entirely true: Exynos4210/4212/4412 clock code still relied on it to get the clock rate of xxti or xusbxti external clocks. Drop that requirement by accessing already registered clk_hw when looking up the xxti/xusbxti rate. Reported-by: Artur Weber <[email protected]> Closes: https://lore.kernel.org/all/[email protected]/ Fixes: 0dc83ad8bfc9 ("clk: samsung: Don't register clkdev lookup for the fixed rate clocks") Cc: <[email protected]> Signed-off-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Tested-by: Artur Weber <[email protected]> # Exynos4212 Signed-off-by: Stephen Boyd <[email protected]>
2024-07-23drm/bridge: tc358767: Add configurable default preemphasisMarek Vasut1-7/+38
Make the default DP port preemphasis configurable via new DT property "toshiba,pre-emphasis". This is useful in case the DP link properties are known and starting link training from preemphasis setting of 0 dB is not useful. The preemphasis can be set separately for both DP lanes in range 0=0dB, 1=3.5dB, 2=6dB . Acked-by: Alexander Stein <[email protected]> Signed-off-by: Marek Vasut <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-07-23dt-bindings: display: bridge: tc358867: Document default DP preemphasisMarek Vasut1-1/+20
Document default DP port preemphasis configurable via new DT property "toshiba,pre-emphasis". This is useful in case the DP link properties are known and starting link training from preemphasis setting of 0 dB is not useful. The preemphasis can be set separately for both DP lanes in range 0=0dB, 1=3.5dB, 2=6dB . This is an endpoint property, not a port property, because the TC9595 datasheet does mention that the DP might operate in some sort of split mode, where each DP lane is used to feed one display, so in that case there might be two endpoints. Signed-off-by: Marek Vasut <[email protected]> Reviewed-by: Rob Herring (Arm) <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-07-23Merge tag 'livepatching-for-6.11' of ↵Linus Torvalds5-53/+163
git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching Pull livepatching update from Petr Mladek: - show patch->replace flag in sysfs - add or improve few selftests * tag 'livepatching-for-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching: livepatch: Replace snprintf() with sysfs_emit() selftests/livepatch: Add selftests for "replace" sysfs attribute livepatch: Add "replace" sysfs attribute selftests: livepatch: Test atomic replace against multiple modules selftests/livepatch: define max test-syscall processes
2024-07-23drm/xe: Store process name and pid in xe fileMatthew Brost4-16/+25
An xe file can outlive the associated process as the GPU cleanup is just triggered upon file close (process kill) and completes sometime later. If the file close triggers error conditions (GPU hangs) the process cannot be safely referenced to retrieve the name and pid for debug information. Store the process name and pid directly in the xe file to be safe. v2: - Access file->pid via rcu_access_pointer (Matthew Auld) Fixes: b10d0c5e9df7 ("drm/xe: Add process name to devcoredump") Fixes: f6ca930d974e ("drm/xe: Add process name and PID to job timedout message") Signed-off-by: Matthew Brost <[email protected]> Acked-by: Rodrigo Vivi <[email protected]> Reviewed-by: Matthew Auld <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-07-23HID: amd_sfh: Move sensor discovery before HID device initializationBasavaraj Natikar1-7/+11
Sensors discovery is independent of HID device initialization. If sensor discovery fails after HID initialization, then the HID device needs to be deinitialized. Therefore, sensors discovery should be moved before HID device initialization. Fixes: 7bcfdab3f0c6 ("HID: amd_sfh: if no sensors are enabled, clean up") Tested-by: Aurinko <[email protected]> Signed-off-by: Basavaraj Natikar <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Benjamin Tissoires <[email protected]>
2024-07-23Merge tag 'i2c-for-6.11-rc1-second-batch' of ↵Linus Torvalds8-29/+56
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull more i2c updates from Wolfram Sang: "The I2C core has two header documentation updates as the dependecies are in now. The I2C host drivers add some patches which nearly fell through the cracks: - Added descriptions in the DTS for the Qualcomm SM8650 and SM8550 Camera Control Interface (CCI). - Added support for the "settle-time-us" property, which allows the gpio-mux device to switch from one bus to another with a configurable delay. The time can be set in the DTS. The latest change also includes file sorting. - Fixed slot numbering in the SMBus framework to prevent failures when more than 8 slots are occupied. It now enforces a a maximum of 8 slots to be used. This ensures that the Intel PIIX4 device can register the SPDs correctly without failure, even if other slots are populated but not used" * tag 'i2c-for-6.11-rc1-second-batch' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: header: improve kdoc for i2c_algorithm i2c: header: remove unneeded stuff regarding i2c_algorithm i2c: piix4: Register SPDs i2c: smbus: remove i801 assumptions from SPD probing i2c: mux: gpio: Add support for the 'settle-time-us' property i2c: mux: gpio: Re-order #include to match alphabetic order dt-bindings: i2c: mux-gpio: Add 'settle-time-us' property dt-bindings: i2c: qcom-cci: Document sm8650 compatible dt-bindings: i2c: qcom-cci: Document sm8550 compatible
2024-07-23Merge tag 'mailbox-v6.11' of ↵Linus Torvalds12-43/+548
git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox Pull mailbox updates from Jassi Brar: "broadcom: - remove unused pdc_dma_map imx: - fix TXDB_V2 channel race condition mediatek: - cleanup and refactor driver - add bindings for gce-props omap: - fix mailbox interrupt sharing qcom: - add bindings for SA8775p - add CPUCP driver zynqmp: - make polling period configurable" * tag 'mailbox-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox: mailbox: mtk-cmdq: Move devm_mbox_controller_register() after devm_pm_runtime_enable() mailbox: zynqmp-ipi: Make polling period configurable mailbox: qcom-cpucp: fix 64BIT dependency mailbox: Add support for QTI CPUCP mailbox controller dt-bindings: mailbox: qcom: Add CPUCP mailbox controller bindings dt-bindings: remoteproc: qcom,sa8775p-pas: Document the SA8775p ADSP, CDSP and GPDSP mailbox: mtk-cmdq: add missing MODULE_DESCRIPTION() macro mailbox: bcm-pdc: remove unused struct 'pdc_dma_map' mailbox: imx: fix TXDB_V2 channel race condition mailbox: omap: Fix mailbox interrupt sharing mailbox: mtk-cmdq: Dynamically allocate clk_bulk_data structure mailbox: mtk-cmdq: Move and partially refactor clocks probe mailbox: mtk-cmdq: Stop requiring name for GCE clock dt-bindings: mailbox: Add mediatek,gce-props.yaml
2024-07-23Merge tag 'pcmcia-6.11-rc1' of ↵Linus Torvalds6-4/+8
git://git.kernel.org/pub/scm/linux/kernel/git/brodo/linux Pull PCMCIA updates from Dominik Brodowski: "A number of tiny cleanups of the PCMCIA subsystem by Jeff Johnson, Jules Irenge, and Krzysztof Kozlowski" * tag 'pcmcia-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/linux: pcmcia: add missing MODULE_DESCRIPTION() macros pcmcia: Use resource_size function on resource object pcmcia: bcm63xx: drop driver owner assignment
2024-07-23Merge tag 'for-v6.11' of ↵Linus Torvalds30-161/+1127
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply Pull power supply and reset updates from Sebastian Reichel: "Power-supply core: - new charging_orange_full_green RGB LED trigger - simplify and cleanup power-supply LED trigger code - expose power information via hwmon compatibility layer New hardware support: - enable battery support for Qualcomm Snapdragon X Elite - new battery driver for Maxim MAX17201/MAX17205 - new battery driver for Lenovo Yoga C630 laptop (custom EC) Cleanups: - cleanup 'struct i2c_device_id' initializations - misc small battery driver cleanups and fixes" * tag 'for-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: power: supply: sysfs: use power_supply_property_is_writeable() power: supply: qcom_battmgr: Enable battery support on x1e80100 power: supply: add support for MAX1720x standalone fuel gauge dt-bindings: power: supply: add support for MAX17201/MAX17205 fuel gauge power: reset: piix4: add missing MODULE_DESCRIPTION() macro power: supply: samsung-sdi-battery: Constify struct power_supply_maintenance_charge_table power: supply: samsung-sdi-battery: Constify struct power_supply_vbat_ri_table power: supply: lenovo_yoga_c630_battery: add Lenovo C630 driver power: supply: ingenic: Fix some error handling paths in ingenic_battery_get_property() power: supply: ab8500: Clean some error messages power: supply: ab8500: Use iio_read_channel_processed_scale() power: supply: ab8500: Fix error handling when calling iio_read_channel_processed() power: supply: hwmon: Add support for power sensors power: supply: ab8500: remove unused struct 'inst_curr_result_list' power: supply: bd99954: remove unused struct 'battery_data' power: supply: leds: Add activate() callback to triggers power: supply: leds: Share trig pointer for online and charging_full power: supply: leds: Add power_supply_[un]register_led_trigger() power: supply: Drop explicit initialization of struct i2c_device_id::driver_data to 0
2024-07-23Merge tag 'hsi-for-6.11' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi Pull HSI update from Sebastian Reichel: - drop unused gpio.h header from SSI McSAAB protocol driver * tag 'hsi-for-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi: HSI: ssi_protocol: Remove unused linux/gpio.h
2024-07-24kbuild: doc: gcc to CC changeIvan Davydov1-3/+3
In this part of the documentation, $(CC) is meant, but gcc is written. Signed-off-by: Ivan Davydov <[email protected]> Signed-off-by: Masahiro Yamada <[email protected]>
2024-07-23iommu/amd: Convert comma to semicolonChen Ni1-3/+3
Replace a comma between expression statements by a semicolon. Fixes: c9b258c6be09 ("iommu/amd: Prepare for generic IO page table framework") Signed-off-by: Chen Ni <[email protected]> Reviewed-by: Suravee Suthikulpanit <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Will Deacon <[email protected]>
2024-07-23iommu: sprd: Avoid NULL deref in sprd_iommu_hw_enArtem Chernyshev1-1/+1
In sprd_iommu_cleanup() before calling function sprd_iommu_hw_en() dom->sdev is equal to NULL, which leads to null dereference. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 9afea57384d4 ("iommu/sprd: Release dma buffer to avoid memory leak") Signed-off-by: Artem Chernyshev <[email protected]> Reviewed-by: Chunyan Zhang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Will Deacon <[email protected]>
2024-07-23cifs: fix potential null pointer use in destroy_workqueue in init_cifs error ↵Steve French1-4/+4
path Dan Carpenter reported a Smack static checker warning: fs/smb/client/cifsfs.c:1981 init_cifs() error: we previously assumed 'serverclose_wq' could be null (see line 1895) The patch which introduced the serverclose workqueue used the wrong oredering in error paths in init_cifs() for freeing it on errors. Fixes: 173217bd7336 ("smb3: retrying on failed server close") Cc: [email protected] Cc: Ritvik Budhiraja <[email protected]> Reported-by: Dan Carpenter <[email protected]> Reviewed-by: Dan Carpenter <[email protected]> Reviewed-by: David Howells <[email protected]> Signed-off-by: Steve French <[email protected]>
2024-07-23Merge branch 'for-6.11/sysfs-patch-replace' into for-linusPetr Mladek3-3/+70
2024-07-23drm/xe: Return -ENOBUFS if a kmalloc fails which is tied to an array of bindsMatthew Brost1-6/+6
The size of an array of binds is directly tied to several kmalloc in the KMD, thus making these kmalloc more likely to fail. Return -ENOBUFS in the case of these failures. The expected UMD behavior upon returning -ENOBUFS is to split an array of binds into a series of single binds. v2: - Resend for CI v3: - Resend for CI Cc: Paulo Zanoni <[email protected]> Signed-off-by: Matthew Brost <[email protected]> Reviewed-by: Himal Prasad Ghimiray <[email protected]> Reviewed-by: Jonathan Cavitt <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Powered by cgit, Gruvboxed by Blaster4385.