| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
syzbot/KMSAN reported use of uninit-value in get_dev_xmit() [1]
We must make sure the IPv4 or Ipv6 header is pulled in skb->head
before accessing fields in them.
Use pskb_inet_may_pull() to fix this issue.
[1]
BUG: KMSAN: uninit-value in ipv6_pdp_find drivers/net/gtp.c:220 [inline]
BUG: KMSAN: uninit-value in gtp_build_skb_ip6 drivers/net/gtp.c:1229 [inline]
BUG: KMSAN: uninit-value in gtp_dev_xmit+0x1424/0x2540 drivers/net/gtp.c:1281
ipv6_pdp_find drivers/net/gtp.c:220 [inline]
gtp_build_skb_ip6 drivers/net/gtp.c:1229 [inline]
gtp_dev_xmit+0x1424/0x2540 drivers/net/gtp.c:1281
__netdev_start_xmit include/linux/netdevice.h:4913 [inline]
netdev_start_xmit include/linux/netdevice.h:4922 [inline]
xmit_one net/core/dev.c:3580 [inline]
dev_hard_start_xmit+0x247/0xa20 net/core/dev.c:3596
__dev_queue_xmit+0x358c/0x5610 net/core/dev.c:4423
dev_queue_xmit include/linux/netdevice.h:3105 [inline]
packet_xmit+0x9c/0x6c0 net/packet/af_packet.c:276
packet_snd net/packet/af_packet.c:3145 [inline]
packet_sendmsg+0x90e3/0xa3a0 net/packet/af_packet.c:3177
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0x30f/0x380 net/socket.c:745
__sys_sendto+0x685/0x830 net/socket.c:2204
__do_sys_sendto net/socket.c:2216 [inline]
__se_sys_sendto net/socket.c:2212 [inline]
__x64_sys_sendto+0x125/0x1d0 net/socket.c:2212
x64_sys_call+0x3799/0x3c10 arch/x86/include/generated/asm/syscalls_64.h:45
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Uninit was created at:
slab_post_alloc_hook mm/slub.c:3994 [inline]
slab_alloc_node mm/slub.c:4037 [inline]
kmem_cache_alloc_node_noprof+0x6bf/0xb80 mm/slub.c:4080
kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:583
__alloc_skb+0x363/0x7b0 net/core/skbuff.c:674
alloc_skb include/linux/skbuff.h:1320 [inline]
alloc_skb_with_frags+0xc8/0xbf0 net/core/skbuff.c:6526
sock_alloc_send_pskb+0xa81/0xbf0 net/core/sock.c:2815
packet_alloc_skb net/packet/af_packet.c:2994 [inline]
packet_snd net/packet/af_packet.c:3088 [inline]
packet_sendmsg+0x749c/0xa3a0 net/packet/af_packet.c:3177
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0x30f/0x380 net/socket.c:745
__sys_sendto+0x685/0x830 net/socket.c:2204
__do_sys_sendto net/socket.c:2216 [inline]
__se_sys_sendto net/socket.c:2212 [inline]
__x64_sys_sendto+0x125/0x1d0 net/socket.c:2212
x64_sys_call+0x3799/0x3c10 arch/x86/include/generated/asm/syscalls_64.h:45
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
CPU: 0 UID: 0 PID: 7115 Comm: syz.1.515 Not tainted 6.11.0-rc1-syzkaller-00043-g94ede2a3e913 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 06/27/2024
Fixes: 999cb275c807 ("gtp: add IPv6 support")
Fixes: 459aa660eb1d ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)")
Signed-off-by: Eric Dumazet <[email protected]>
Cc: Harald Welte <[email protected]>
Reviewed-by: Pablo Neira Ayuso <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Currently ethtool_set_channel calls separate functions to check whether
the new channel number violates rss configuration or flow steering
configuration.
Very soon we need to check whether the new channel number violates
memory provider configuration as well.
To do all 3 checks cleanly, add a wrapper around
ethtool_get_max_rxnfc_channel() and ethtool_get_max_rxfh_channel(),
which does both checks. We can later extend this wrapper to add the
memory provider check in one place.
Note that in the current code, we put a descriptive genl error message
when we run into issues. To preserve the error message, we pass the
genl_info* to the common helper. The ioctl calls can pass NULL instead.
Suggested-by: Jakub Kicinski <[email protected]>
Signed-off-by: Mina Almasry <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Pull smb client fixes from Steve French:
- DFS fix
- fix for security flags for requiring encryption
- minor cleanup
* tag '6.11-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: cifs_inval_name_dfs_link_error: correct the check for fullpath
Fix spelling errors in Server Message Block
smb3: fix setting SecurityFlags when encryption is required
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A few SPI fixes: clock rate calculation fixes for the Kunpeng and lpsi
drivers and a missing registration of a device ID for spidev (which
had only been updated for DT cases, causing warnings)"
* tag 'spi-fix-v6.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: spi-fsl-lpspi: Fix scldiv calculation
spi: spidev: Add missing spi_device_id for bh2228fv
spi: hisi-kunpeng: Add verification for the max_frequency provided by the firmware
spi: hisi-kunpeng: Add validation for the minimum value of speed_hz
|
|
On PREEMPT_RT, kfree() takes sleeping locks and must not be called with
preemption disabled. Therefore, on PREEMPT_RT skcipher_walk_done() must
not be called from within a kernel_fpu_{begin,end}() pair, even when
it's the last call which is guaranteed to not allocate memory.
Therefore, move the last skcipher_walk_done() in gcm_crypt() to the end
of the function so that it goes after the kernel_fpu_end(). To make
this work cleanly, rework the data processing loop to handle only
non-last data segments.
Fixes: b06affb1cb58 ("crypto: x86/aes-gcm - add VAES and AVX512 / AVX10 optimized AES-GCM")
Reported-by: Sebastian Andrzej Siewior <[email protected]>
Closes: https://lore.kernel.org/linux-crypto/[email protected]
Signed-off-by: Eric Biggers <[email protected]>
Tested-by: Sebastian Andrzej Siewior <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
|
|
Add the missing clk_disable_unprepare() before return in
cctrng_resume().
Fixes: a583ed310bb6 ("hwrng: cctrng - introduce Arm CryptoCell driver")
Cc: <[email protected]>
Signed-off-by: Gaosheng Cui <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
|
|
Add the missing clk_disable_unprepare() before return in
bcm2835_rng_init().
Fixes: e5f9f41d5e62 ("hwrng: bcm2835 - add reset support")
Cc: <[email protected]>
Signed-off-by: Gaosheng Cui <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
|
|
This reverts commit d58bb7e55a8a65894cc02f27c3e2bf9403e7c40f.
It's no longer needed since sm2 has been removed.
Signed-off-by: Herbert Xu <[email protected]>
|
|
Rockchip SoCs used to have a random number generator as part of their
crypto device, and support for it has to be added to the corresponding
driver. However newer Rockchip SoCs like the RK3568 have an independent
True Random Number Generator device. This patch adds a driver for it,
greatly inspired from the downstream driver.
The TRNG device does not seem to have a signal conditionner and the FIPS
140-2 test returns a lot of failures. They can be reduced by increasing
RK_RNG_SAMPLE_CNT, in a tradeoff between quality and speed. This value
has been adjusted to get ~90% of successes and the quality value has
been set accordingly.
Signed-off-by: Aurelien Jarno <[email protected]>
[[email protected]: code style fixes]
Signed-off-by: Daniel Golle <[email protected]>
Acked-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
|
|
Add the True Random Number Generator on the Rockchip RK3568 SoC.
Signed-off-by: Aurelien Jarno <[email protected]>
Signed-off-by: Daniel Golle <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
|
|
Switch cpumask_t to cpumask_var_t as the former may be too big
for the stack:
CC [M] drivers/crypto/caam/qi.o
CC [M] drivers/crypto/caam/caamalg_qi2.o
../drivers/crypto/caam/qi.c: In function ‘caam_qi_init’:
../drivers/crypto/caam/qi.c:808:1: warning: the frame size of 1056 bytes is larger than 1024 bytes [-Wframe-larger-than=]
808 | }
| ^
CHECK ../drivers/crypto/caam/qi.c
../drivers/crypto/caam/caamalg_qi2.c: In function ‘dpaa2_dpseci_setup’:
../drivers/crypto/caam/caamalg_qi2.c:5135:1: warning: the frame size of 1032 bytes is larger than 1024 bytes [-Wframe-larger-than=]
5135 | }
| ^
Also fix the error path handling in qi.c.
Signed-off-by: Herbert Xu <[email protected]>
|
|
Before commit addea5858b66 ("hwrng: Kconfig - Do not enable by default
CN10K driver") the Marvell CN10K Random Number Generator was always
enabled when HW_RANDOM was enabled.
This was changed with that commit to prevent having this driver being
always enabled on arm64. To prevent introducing regression with some old
defconfig enable the driver when ARCH_THUNDER is enabled.
Fixes: addea5858b66 ("hwrng: Kconfig - Do not enable by default CN10K driver")
Closes: https://lore.kernel.org/all/SN7PR18MB53144B37B82ADEEC5D35AE0CE3AC2@SN7PR18MB5314.namprd18.prod.outlook.com/
Signed-off-by: Francesco Dolcini <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
|
|
Signed-off-by: Bhoomika K <[email protected]>
Signed-off-by: Pavitrakumar M <[email protected]>
Acked-by: Ruud Derwig <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
|
|
Signed-off-by: shwetar <[email protected]>
Signed-off-by: Pavitrakumar M <[email protected]>
Acked-by: Ruud Derwig <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
|
|
Signed-off-by: shwetar <[email protected]>
Signed-off-by: Pavitrakumar M <[email protected]>
Acked-by: Ruud Derwig <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
|
|
Signed-off-by: shwetar <[email protected]>
Signed-off-by: Pavitrakumar M <[email protected]>
Acked-by: Ruud Derwig <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
|
|
Signed-off-by: Bhoomika K <[email protected]>
Signed-off-by: Pavitrakumar M <[email protected]>
Acked-by: Ruud Derwig <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
|
|
Signed-off-by: Bhoomika K <[email protected]>
Signed-off-by: Pavitrakumar M <[email protected]>
Acked-by: Ruud Derwig <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
|
|
Use a dummy xe_debugfs_register() if debugfs is not enabled and move all
debugfs-related files under `ifeq ($(CONFIG_DEBUG_FS),y)` in the
Makefile. This is similar to what was done for display in
commit 439987f6f471 ("drm/xe: don't build debugfs files when
CONFIG_DEBUG_FS=n").
This removes the following warning while loading xe with
CONFIG_DEUBG_FS=n:
xe 0000:03:00.0: [drm] Create GT directory failed
Reviewed-by: Nirmoy Das <[email protected]>
Reviewed-by: Matthew Brost <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Lucas De Marchi <[email protected]>
|
|
Commit 04d82a6d0881 ("binfmt_flat: allow not offsetting data start")
introduced a RISC-V specific variant of the FLAT format which does
not allocate any space for the (obsolete) array of shared library
pointers. However, it did not disable the code which initializes the
array, resulting in the corruption of sizeof(long) bytes before the DATA
segment, generally the end of the TEXT segment.
Introduce MAX_SHARED_LIBS_UPDATE which depends on the state of
CONFIG_BINFMT_FLAT_NO_DATA_START_OFFSET to guard the initialization of
the shared library pointer region so that it will only be initialized
if space is reserved for it.
Fixes: 04d82a6d0881 ("binfmt_flat: allow not offsetting data start")
Co-developed-by: Stefan O'Rear <[email protected]>
Signed-off-by: Stefan O'Rear <[email protected]>
Reviewed-by: Damien Le Moal <[email protected]>
Acked-by: Greg Ungerer <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Kees Cook <[email protected]>
|
|
Noticed with:
1 6.22 debian:experimental-x-mipsel : FAIL gcc version 13.2.0 (Debian 13.2.0-25)
builtin-daemon.c: In function 'cmd_session_list':
builtin-daemon.c:691:35: error: format '%lu' expects argument of type 'long unsigned int', but argument 4 has type 'time_t' {aka 'long long int'} [-Werror=format=]
Use inttypes.h's PRIu64 to deal with that.
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Link: https://lore.kernel.org/r/ZplvH21aQ8pzmza_@x1
Signed-off-by: Namhyung Kim <[email protected]>
|
|
Switching modes between LR and dma-fence can result in multiple calls to
suspend / resume. Make these calls safe while still enforcing call
order.
Signed-off-by: Matthew Brost <[email protected]>
Reviewed-by: Jonathan Cavitt <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
No need to enable scheduling in already enabled.
Signed-off-by: Matthew Brost <[email protected]>
Reviewed-by: Jonathan Cavitt <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Will help by allowing callers to own message locking.
Signed-off-by: Matthew Brost <[email protected]>
Reviewed-by: Jonathan Cavitt <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Will help to avoid adding a static message twice.
Signed-off-by: Matthew Brost <[email protected]>
Reviewed-by: Jonathan Cavitt <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Will help callers to own locking when adding messages to scheduler.
Signed-off-by: Matthew Brost <[email protected]>
Reviewed-by: Jonathan Cavitt <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
bcachefs_metadata_version_disk_accounting_v2 erroneously had padding
bytes in disk_accounting_key, which is a problem because we have to
guarantee that all unused bytes in disk_accounting_key are zeroed.
Fortunately 6.11 isn't out yet, so it's cheap to fix this by spinning a
new version.
Reported-by: Gabriel de Perthuis <[email protected]>
Signed-off-by: Kent Overstreet <[email protected]>
|
|
The cxl_test unit test environment on qemu always hits below call trace
with KASAN enabled:
BUG: KASAN: slab-out-of-bounds in cxl_setup_parent_dport+0x480/0x530 [cxl_core]
Read of size 1 at addr ff110000676014f8 by task (udev-worker)/676[ 24.424403] CPU: 2 PID: 676 Comm: (udev-worker) Tainted: G O N 6.10.0-qemucxl #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS edk2-20240214-2.el9 02/14/2024
Call Trace:
<TASK>
dump_stack_lvl+0xea/0x150
print_report+0xce/0x610
? kasan_complete_mode_report_info+0x40/0x200
kasan_report+0xcc/0x110
__asan_report_load1_noabort+0x18/0x20
cxl_setup_parent_dport+0x480/0x530 [cxl_core]
cxl_mem_probe+0x49b/0xaa0 [cxl_mem]
cxl_test module models a CXL topology for testing, it creates some
emulated dports with platform devices in the CXL topology, so the
dport_dev of an emulated dport points to a platform device rather than a
pci device or a pci host bridge in the case. Currently,
cxl_setup_parent_dport() is used to set up RAS and AER capability on the
dport connected to the CXL memory device, but cxl_test does not support
RAS or AER functionality yet, so the fix is implementing a
__wrap_cxl_setup_parent_dport() to filter out all emulated dports,
guarantees only real dports can be handled by cxl_setup_parent_dport().
Fixes: f05fd10d138d ("cxl/pci: Add RCH downstream port AER register discovery")
Reported-by: Pengfei Xu <[email protected]>
Closes: https://lore.kernel.org/linux-cxl/[email protected]/T/#t
Signed-off-by: Li Ming <[email protected]>
Reviewed-by: Dan Williams <[email protected]>
Reviewed-by: Ira Weiny <[email protected]>
Reviewed-by: Alison Schofield <[email protected]>
Tested-by: Ira Weiny <[email protected]>
Tested-by: Alison Schofield <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Dave Jiang <[email protected]>
|
|
cxl_setup_parent_dport() needs to get RCH dport AER capability address
from RCRB to disable AER interrupt. The function does not check if dport
is RCH dport, it will get a wrong pci_host_bridge structure by dport_dev
in VH case because dport_dev points to a pci device(RP or switch DSP)
rather than a pci host bridge device.
Fixes: f05fd10d138d ("cxl/pci: Add RCH downstream port AER register discovery")
Signed-off-by: Li Ming <[email protected]>
Reviewed-by: Dan Williams <[email protected]>
Reviewed-by: Ira Weiny <[email protected]>
Tested-by: Ira Weiny <[email protected]>
Tested-by: Alison Schofield <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Dave Jiang <[email protected]>
|
|
LLVM 19 is dropping support for 3DNow! in commit f0eb5587ceeb ("Remove
support for 3DNow!, both intrinsics and builtins. (#96246)"):
Remove support for 3DNow!, both intrinsics and builtins. (#96246)
This set of instructions was only supported by AMD chips starting in
the K6-2 (introduced 1998), and before the "Bulldozer" family
(2011). They were never much used, as they were effectively superseded
by the more-widely-implemented SSE (first implemented on the AMD side
in Athlon XP in 2001).
This is being done as a predecessor towards general removal of MMX
register usage. Since there is almost no usage of the 3DNow!
intrinsics, and no modern hardware even implements them, simple
removal seems like the best option.
Thus we should avoid passing these to the backend, since otherwise we
get a diagnostic about it:
'-3dnow' is not a recognized feature for this target (ignoring feature)
'-3dnowa' is not a recognized feature for this target (ignoring feature)
We could try to disable them only up to LLVM 19 (not the C side one,
but the one used by `rustc`, which may be built with a range of
LLVMs). However, to avoid more complexity, we can likely just remove
them altogether. According to Nikita [2]:
> I don't think it's needed because LLVM should not generate 3dnow
> instructions unless specifically asked to, using intrinsics that
> Rust does not provide in the first place.
Thus do so, like Rust did for one of their builtin targets [3].
For those curious: Clang will warn only about trying to enable them
(`-m3dnow{,a}`), but not about disabling them (`-mno-3dnow{,a}`), so
there is no change needed there.
Cc: Nikita Popov <[email protected]>
Cc: Nathan Chancellor <[email protected]>
Cc: [email protected]
Link: https://github.com/llvm/llvm-project/commit/f0eb5587ceeb641445b64cb264c822b4751de04a [1]
Link: https://github.com/rust-lang/rust/pull/127864#issuecomment-2235898760 [2]
Link: https://github.com/rust-lang/rust/pull/127864 [3]
Closes: https://github.com/Rust-for-Linux/linux/issues/1094
Tested-by: Benno Lossin <[email protected]>
Tested-by: Alice Ryhl <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Miguel Ojeda <[email protected]>
|
|
When calling the `rust_is_available.sh` script, we need to make the
jobserver available to it, as commit ecab4115c44c ("kbuild: mark `rustc`
(and others) invocations as recursive") explains and did for the others.
Otherwise, we get a warning from `rustc` when calling `make rust-analyzer`
with parallel jobs, e.g. `-j8`. Using several jobs for that target does
not really matter, but developers may call `make` with jobs enabled in
all cases.
Thus fix it.
Fixes: 6dc9d9ca9a72 ("kbuild: rust-analyzer: better error handling")
Reviewed-by: Alice Ryhl <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
[ Reworded to add a couple more details mentioned in the list. - Miguel ]
Signed-off-by: Miguel Ojeda <[email protected]>
|
|
Alice reported [1] that an arm64 build failed with:
ld.lld: error: undefined symbol: __extendsfdf2
>>> referenced by core.a6f5fc5794e7b7b3-cgu.0
>>> rust/core.o:(<f32>::midpoint) in archive vmlinux.a
>>> referenced by core.a6f5fc5794e7b7b3-cgu.0
>>> rust/core.o:(<f32>::midpoint) in archive vmlinux.a
ld.lld: error: undefined symbol: __truncdfsf2
>>> referenced by core.a6f5fc5794e7b7b3-cgu.0
>>> rust/core.o:(<f32>::midpoint) in archive vmlinux.a
Rust 1.80.0 or later together with `CONFIG_CC_OPTIMIZE_FOR_SIZE=y`
is what triggers it.
In addition, x86_64 builds also fail the same way.
Similarly, compiling with Rust 1.82.0 (currently in nightly) makes
another one appear, possibly due to the LLVM 19 upgrade there:
ld.lld: error: undefined symbol: __eqdf2
>>> referenced by core.20495ea57a9f069d-cgu.0
>>> rust/core.o:(<f64>::next_up) in archive vmlinux.a
>>> referenced by core.20495ea57a9f069d-cgu.0
>>> rust/core.o:(<f64>::next_down) in archive vmlinux.a
Gary adds [1]:
> Usually the fix on rustc side is to mark those functions as `#[inline]`
>
> All of {midpoint,next_up,next_down} are indeed unstable functions not
> marked as inline...
Fix all those by adding those intrinsics to our usual workaround.
[ Trevor quickly submitted a fix to upstream Rust [2] that has already
been merged, to be released in Rust 1.82.0 (2024-10-17). - Miguel ]
Cc: Gary Guo <[email protected]>
Reported-by: Alice Ryhl <[email protected]>
Closes: https://rust-for-linux.zulipchat.com/#narrow/stream/x/topic/x/near/455637364 [1]
Reviewed-by: Trevor Gross <[email protected]>
Tested-by: Alice Ryhl <[email protected]>
Tested-by: Boqun Feng <[email protected]>
Reviewed-by: Gary Guo <[email protected]>
Link: https://github.com/rust-lang/rust/pull/128749 [2]
Link: https://lore.kernel.org/r/[email protected]
[ Shortened Zulip link. - Miguel ]
Signed-off-by: Miguel Ojeda <[email protected]>
|
|
GCC 14 recently added -fmin-function-alignment option and the
root Makefile uses it to replace -falign-functions when available.
However, this flag can cause issues when passed to the Rust
Makefile and affect the bindgen process. Bindgen relies on
libclang to parse C code, and currently does not support the
-fmin-function-alignment flag, leading to compilation failures
when GCC 14 is used.
This patch addresses the issue by adding -fmin-function-alignment
to the bindgen_skip_c_flags in rust/Makefile. This prevents the
flag from causing compilation issues.
[ Matthew and Gary confirm function alignment should not change
the ABI in a way that bindgen would care about, thus we did
not need the extra logic for bindgen from v2. - Miguel ]
Link: https://lore.kernel.org/linux-kbuild/[email protected]/
Signed-off-by: Zehui Xu <[email protected]>
Reviewed-by: Alice Ryhl <[email protected]>
Reviewed-by: Neal Gompa <[email protected]>
Reviewed-by: Gary Guo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
[ Reworded title. - Miguel ]
Signed-off-by: Miguel Ojeda <[email protected]>
|
|
The --skip-empty option is to hide dummy events in a group. Like other
output mode in 'perf report' and 'perf annotate', the data-type
profiling output should support the option.
Committer testing:
With dummy:
root@number:~# perf annotate --stdio --group --data-type --skip-empty | head -24
Annotate type: 'pthread_mutex_t' in /usr/lib64/libc.so.6 (50 samples):
event[0] = cpu_atom/mem-loads,ldlat=30/P
event[1] = cpu_atom/mem-stores/P
event[2] = dummy:u
============================================================================
Percent offset size field
100.00 100.00 0.00 0 40 pthread_mutex_t {
100.00 100.00 0.00 0 40 struct __pthread_mutex_s __data {
45.21 84.54 0.00 0 4 int __lock;
0.00 0.00 0.00 4 4 unsigned int __count;
0.00 1.83 0.00 8 4 int __owner;
5.19 10.65 0.00 12 4 unsigned int __nusers;
49.61 2.97 0.00 16 4 int __kind;
0.00 0.00 0.00 20 2 short int __spins;
0.00 0.00 0.00 22 2 short int __elision;
0.00 0.00 0.00 24 16 __pthread_list_t __list {
0.00 0.00 0.00 24 8 struct __pthread_internal_list* __prev;
0.00 0.00 0.00 32 8 struct __pthread_internal_list* __next;
};
};
0.00 0.00 0.00 0 0 char[] __size;
45.21 84.54 0.00 0 8 long int __align;
};
Skipping it:
root@number:~# perf annotate --stdio --group --data-type --skip-empty | head -24
Annotate type: 'pthread_mutex_t' in /usr/lib64/libc.so.6 (50 samples):
event[0] = cpu_atom/mem-loads,ldlat=30/P
event[1] = cpu_atom/mem-stores/P
============================================================================
Percent offset size field
100.00 100.00 0 40 pthread_mutex_t {
100.00 100.00 0 40 struct __pthread_mutex_s __data {
45.21 84.54 0 4 int __lock;
0.00 0.00 4 4 unsigned int __count;
0.00 1.83 8 4 int __owner;
5.19 10.65 12 4 unsigned int __nusers;
49.61 2.97 16 4 int __kind;
0.00 0.00 20 2 short int __spins;
0.00 0.00 22 2 short int __elision;
0.00 0.00 24 16 __pthread_list_t __list {
0.00 0.00 24 8 struct __pthread_internal_list* __prev;
0.00 0.00 32 8 struct __pthread_internal_list* __next;
};
};
0.00 0.00 0 0 char[] __size;
45.21 84.54 0 8 long int __align;
};
Annotate type: 'pthread_mutexattr_t' in /usr/lib64/libc.so.6 (1 samples):
root@number:~#
Signed-off-by: Namhyung Kim <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
When --group option is used, it should display all events together. But
the current logic only checks if the first (leader) event has samples or
not. Let's check the member events as well.
Also it missed to put the linked samples from member evsels to the
output RB-tree so that it can be displayed in the output.
For example, take a look at this example.
$ ./perf evlist
cpu/mem-loads,ldlat=30/P
cpu/mem-stores/P
dummy:u
It has three events but 'path_put' function has samples only for
mem-stores (second) event.
$ sudo ./perf annotate --stdio -f path_put
Percent | Source code & Disassembly of kcore for cpu/mem-stores/P (2 samples, percent: local period)
----------------------------------------------------------------------------------------------------------
: 0 0xffffffffae600020 <path_put>:
0.00 : ffffffffae600020: endbr64
0.00 : ffffffffae600024: nopl (%rax, %rax)
91.22 : ffffffffae600029: pushq %rbx
0.00 : ffffffffae60002a: movq %rdi, %rbx
0.00 : ffffffffae60002d: movq 8(%rdi), %rdi
8.78 : ffffffffae600031: callq 0xffffffffae614aa0
0.00 : ffffffffae600036: movq (%rbx), %rdi
0.00 : ffffffffae600039: popq %rbx
0.00 : ffffffffae60003a: jmp 0xffffffffae620670
0.00 : ffffffffae60003f: nop
Therefore, it didn't show up when --group option is used since the
leader ("mem-loads") event has no samples. But now it checks both
events.
Before:
$ sudo ./perf annotate --stdio -f --group path_put
(no output)
After:
$ sudo ./perf annotate --stdio -f --group path_put
Percent | Source code & Disassembly of kcore for cpu/mem-loads,ldlat=30/P, cpu/mem-stores/P, dummy:u (0 samples, percent: local period)
-------------------------------------------------------------------------------------------------------------------------------------------------------------
: 0 0xffffffffae600020 <path_put>:
0.00 0.00 0.00 : ffffffffae600020: endbr64
0.00 0.00 0.00 : ffffffffae600024: nopl (%rax, %rax)
0.00 91.22 0.00 : ffffffffae600029: pushq %rbx
0.00 0.00 0.00 : ffffffffae60002a: movq %rdi, %rbx
0.00 0.00 0.00 : ffffffffae60002d: movq 8(%rdi), %rdi
0.00 8.78 0.00 : ffffffffae600031: callq 0xffffffffae614aa0
0.00 0.00 0.00 : ffffffffae600036: movq (%rbx), %rdi
0.00 0.00 0.00 : ffffffffae600039: popq %rbx
0.00 0.00 0.00 : ffffffffae60003a: jmp 0xffffffffae620670
0.00 0.00 0.00 : ffffffffae60003f: nop
Committer testing:
Before:
root@number:~# perf annotate --group --stdio2 clear_page_erms
root@number:~#
After:
root@number:~# perf annotate --group --stdio2 clear_page_erms
Samples: 125 of events 'cpu_atom/mem-loads,ldlat=30/P, cpu_atom/mem-stores/P, dummy:u', 4000 Hz, Event count (approx.): 13198416, [percent: local period]
clear_page_erms() /proc/kcore
Percent 0xffffffff990c6cc0 <clear_page_erms>:
endbr64
movl $0x1000,%ecx
xorl %eax,%eax
0.00 100.00 0.00 rep stosb %al, (%rdi)
← retq
int3
int3
int3
int3
nop
nop
root@number:~#
Reported-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Namhyung Kim <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Merge the irqdomain changes which are required for regmap to apply
depending patches and therefore tagged.
|
|
Pull drm fixes from Dave Airlie:
"Weekly regular fixes, mostly amdgpu with i915/xe having a few each,
and then some misc bits across the board, seems about right for rc3
time.
client:
- fix null ptr deref
bridge:
- connector: fix double free
atomic:
- fix async flip update
panel:
- document panel
omap:
- add config dependency
tests:
- fix gem shmem test
drm buddy:
- Add start address to trim function
amdgpu:
- DMCUB fix
- Fix DET programming on some DCNs
- DCC fixes
- DCN 4.0.1 fixes
- SMU 14.0.x update
- MMHUB fix
- DCN 3.1.4 fix
- GC 12.0 fixes
- Fix soft recovery error propogation
- SDMA 7.0 fixes
- DSC fix
xe:
- Fix off-by-one when processing RTP rules
- Use dma_fence_chain_free in chain fence unused as a sync
- Fix PL1 disable flow in xe_hwmon_power_max_write
- Take ref to VM in delayed dump snapshot
i915:
- correct dual pps handling for MTL_PCH+ [display]
- Adjust vma offset for framebuffer mmap offset [gem]
- Fix Virtual Memory mapping boundaries calculation [gem]
- Allow evicting to use the requested placement
- Attempt to get pages without eviction first"
* tag 'drm-fixes-2024-08-10' of https://gitlab.freedesktop.org/drm/kernel: (31 commits)
drm/xe: Take ref to VM in delayed snapshot
drm/xe/hwmon: Fix PL1 disable flow in xe_hwmon_power_max_write
drm/xe: Use dma_fence_chain_free in chain fence unused as a sync
drm/xe/rtp: Fix off-by-one when processing rules
drm/amdgpu: Add DCC GFX12 flag to enable address alignment
drm/amdgpu: correct sdma7 max dw
drm/amdgpu: Add address alignment support to DCC buffers
drm/amd/display: Skip Recompute DSC Params if no Stream on Link
drm/amdgpu: change non-dcc buffer copy configuration
drm/amdgpu: Forward soft recovery errors to userspace
drm/amdgpu: add golden setting for gc v12
drm/buddy: Add start address support to trim function
drm/amd/display: Add missing program DET segment call to pipe init
drm/amd/display: Add missing DCN314 to the DML Makefile
drm/amdgpu: force to use legacy inv in mmhub
drm/amd/pm: update powerplay structure on smu v14.0.2/3
drm/amd/display: Add missing mcache registers
drm/amd/display: Add dcc propagation value
drm/amd/display: Add missing DET segments programming
drm/amd/display: Replace dm_execute_dmub_cmd with dc_wake_and_execute_dmub_cmd
...
|
|
Devices can provide multiple interrupt lines. One reason for this is that
a device has multiple subfunctions, each providing its own interrupt line.
Another reason is that a device can be designed to be used (also) on a
system where some of the interrupts can be routed to another processor.
A line often further acts as a demultiplex for specific interrupts
and has it's respective set of interrupt (status, mask, ack, ...)
registers.
Regmap supports the handling of these registers and demultiplexing
interrupts, but the interrupt domain code ends up assigning the same name
for the per interrupt line domains. This causes a naming collision in the
debugFS code and leads to confusion, as /proc/interrupts shows two separate
interrupts with the same domain name and hardware interrupt number.
Instead of adding a workaround in regmap or driver code, allow giving a
name suffix for the domain name when the domain is created.
Add a name_suffix field in the irq_domain_info structure and make
irq_domain_instantiate() use this suffix if it is given when a domain is
created.
[ tglx: Adopt it to the cleanup patch and fixup the invalid NULL return ]
Signed-off-by: Matti Vaittinen <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Link: https://lore.kernel.org/all/871q2yvk5x.ffs@tglx
|
|
irq_domain_set_name() is truly unreadable gunk. Clean it up before adding
more.
Signed-off-by: Thomas Gleixner <[email protected]>
Reviewed-by: Matti Vaittinen <[email protected]>
Link: https://lore.kernel.org/all/874j7uvkbm.ffs@tglx
|
|
irq_domain_create_simple() and irq_domain_create_legacy() use
__irq_domain_instantiate(), but have extra handling of allocating interrupt
descriptors and associating interrupts in them. Some of that is duplicated.
There are also call sites which have conditonals to invoke different
interrupt domain creator functions, where one of them is usually
irq_domain_create_legacy(). Alternatively they associate the interrupts for
the legacy case after creating the domain.
Moving the extra logic of irq_domain_create_simple()/legacy() into
__irq_domain_instantiate() allows to consolidate that.
Introduce hwirq_base and virq_base members in the irq_domain_info
structure, which allows to transport the required information and add the
conditional interrupt descriptor allocation and interrupt association into
__irq_domain_instantiate().
This reduces irq_domain_create_legacy() and irq_domain_create_simple() to
trivial wrappers which fill in the info structure and allows call sites
which must support the legacy case along with more modern mechanism to
select the domain type via the parameters of the info struct.
[ tglx: Massaged change log ]
Suggested-by: Thomas Gleixner <[email protected]>
Signed-off-by: Matti Vaittinen <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Link: https://lore.kernel.org/all/32d07bd79eb2b5416e24da9e9e8fe5955423dcf9.1723120028.git.mazziesaccount@gmail.com
|
|
Create a source symlink to the original source in the objdir.
This is similar to what the main kernel build script does.
Committer testing:
⬢[acme@toolbox perf-tools-next]$ make O=/tmp/build/$(basename $PWD)/ -C tools/perf install-bin
<SNIP>
⬢[acme@toolbox perf-tools-next]$ ls -la /tmp/build/perf-tools-next/source
lrwxrwxrwx. 1 acme acme 41 Aug 9 16:26 /tmp/build/perf-tools-next/source -> /home/acme/git/perf-tools-next/tools/perf
⬢[acme@toolbox perf-tools-next]$
Signed-off-by: Andi Kleen <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Acked-by: Ian Rogers <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
In that case we have a set of placeholder functions, one of them uses a
'Dwarf_Addr' type that is not present as it is defined in the missing
DWARF libraries, so provide a placeholder typedef for that as well.
The build error before this patch:
In file included from util/annotate.c:28:
util/debuginfo.h:44:46: error: unknown type name ‘Dwarf_Addr’
44 | Dwarf_Addr *offs __maybe_unused,
| ^~~~~~~~~~
make[6]: *** [/home/acme/git/perf-tools-next/tools/build/Makefile.build:106: util/annotate.o] Error 1
make[6]: *** Waiting for unfinished jobs....
Acked-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Link: https://lore.kernel.org/lkml/CAM9d7ciushSwEfj7yW4rtDEJBTcCB991V4cswwFEL+cv6QF2pg@mail.gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
__pci_reset_bus() calls pci_bridge_secondary_bus_reset() to perform the
reset and also waits for the Secondary Bus to become again accessible.
__pci_reset_bus() then calls pci_bus_restore_locked() that restores the PCI
devices connected to the bus, and if necessary, recursively restores also
the subordinate buses and their devices.
The logic in pci_bus_restore_locked() does not take into account that after
restoring a device on one level, there might be another Link Downstream
that can only start to come up after restore has been performed for its
Downstream Port device. That is, the Link may require additional wait until
it becomes accessible.
Similarly, pci_slot_restore_locked() lacks wait.
Amend pci_bus_restore_locked() and pci_slot_restore_locked() to wait for
the Secondary Bus before recursively performing the restore of that bus.
Fixes: 090a3c5322e9 ("PCI: Add pci_reset_slot() and pci_reset_bus()")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Ilpo Järvinen <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
|
|
The critical section which requires the VM dma-resv is the call
xe_lrc_create in __xe_exec_queue_init. Move this lock to
__xe_exec_queue_init holding it just around xe_lrc_create. Not only is
good practice, this also fixes a locking double of the VM dma-resv in
the error paths of __xe_exec_queue_init as xe_lrc_put tries to acquire
this too resulting in a deadlock.
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Cc: Maarten Lankhorst <[email protected]>
Signed-off-by: Matthew Brost <[email protected]>
Reviewed-by: Maarten Lankhorst <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
ast currently ioremaps two PCI BARs using pcim_iomap(). It does not perform
a request on the regions, however, which would make the driver a bit more
robust.
PCI now offers pcim_iomap_region(), a managed function which both requests
and ioremaps a BAR.
Replace pcim_iomap() with pcim_iomap_region().
Suggested-by: Thomas Zimmermann <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Philipp Stanner <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
Reviewed-by: Thomas Zimmermann <[email protected]>
Acked-by: Dave Airlie <[email protected]>
|
|
pcim_iomap_regions() is a complicated function that uses a bit mask to
determine the BARs the user wishes to request and ioremap. Almost all users
only ever set a single bit in that mask, making that mechanism
questionable.
pcim_iomap_region() is now available as a more simple replacement.
Make pcim_iomap_region() a public function.
Mark pcim_iomap_regions() as deprecated.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Philipp Stanner <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
|
|
vboxvideo currently does not reserve its PCI BAR through a region request.
Implement the request through the managed function pcim_request_region().
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Philipp Stanner <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
Tested-by: Hans de Goede <[email protected]>
Reviewed-by: Hans de Goede <[email protected]>
Acked-by: Hans de Goede <[email protected]>
|
|
pcim_request_region() is the managed counterpart of pci_request_region().
It is currently only used internally for PCI.
It can be useful for a number of drivers and exporting it is a step towards
deprecating more complicated functions.
Make pcim_request_region() a public function.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Philipp Stanner <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
Tested-by: Hans de Goede <[email protected]>
Reviewed-by: Hans de Goede <[email protected]>
Acked-by: Hans de Goede <[email protected]>
|
|
Bjorn suggests using pdev->dev.groups for attribute_groups constructed on
PCI device enumeration:
"Is it feasible to build an attribute group in pci_doe_init() and
add it to dev->groups so device_add() will automatically add them?"
https://lore.kernel.org/r/20231019165829.GA1381099@bhelgaas
Unfortunately on s390, pcibios_device_add() usurps pdev->dev.groups for
arch-specific attribute_groups, preventing its use for anything else.
Introduce an ARCH_PCI_DEV_GROUPS macro which arches can define in
<asm/pci.h>. The macro is visible in drivers/pci/pci-sysfs.c through the
inclusion of <linux/pci.h>, which in turn includes <asm/pci.h>.
On s390, define the macro to the three attribute_groups previously assigned
to pdev->dev.groups. Thereby pdev->dev.groups is made available for use by
the PCI core.
As a side effect, arch/s390/pci/pci_sysfs.c no longer needs to be compiled
into the kernel if CONFIG_SYSFS=n.
Link: https://lore.kernel.org/r/7b970f7923e373d1b23784721208f93418720485.1722870934.git.lukas@wunner.de
Signed-off-by: Lukas Wunner <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
Acked-by: Niklas Schnelle <[email protected]>
|
|
The dax is only supported on pfn type pmem devices since commit
f467fee48da4 ("block: move the dax flag to queue_limits"). Trying
to mount DAX filesystem fails with this error:
mount: : wrong fs type, bad option, bad superblock on /dev/pmem7,
missing codepage or helper program, or other error.
dmesg(1) may have more information after failed mount system call.
dmesg: EXT4-fs (pmem7): DAX unsupported by block device.
Fix the problem by adding dax flag setting for the missed case.
Fixes: f467fee48da4 ("block: move the dax flag to queue_limits")
Signed-off-by: Zhihao Cheng <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Reviewed-by: Dave Jiang <[email protected]>
Reviewed-by: Ira Weiny <[email protected]>
Tested-by: Ira Weiny <[email protected]>
Tested-by: Alison Schofield <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Ira Weiny <[email protected]>
|