| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The driver sets wakeup enable by default. But not all UARTs are meant to
be wakeup enabled. Change the default to be wakeup capable but not
enabled. The user can enable wakeup when needed.
Signed-off-by: Markus Schneider-Pargmann <[email protected]>
Acked-by: Kevin Hilman <[email protected]>
Reviewed-by: Kevin Hilman <[email protected]>
Tested-by: Kevin Hilman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
If devm_request_irq fails, the code does not cleanup many things that
were setup before. Instead of directly returning ret we should jump to
err.
Fixes: fef4f600319e ("serial: 8250: omap: Fix life cycle issues for interrupt handlers")
Signed-off-by: Markus Schneider-Pargmann <[email protected]>
Reviewed-by: Kevin Hilman <[email protected]>
Tested-by: Kevin Hilman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
This field seems to be unused for quite some time already. Remove it.
Signed-off-by: Markus Schneider-Pargmann <[email protected]>
Reviewed-by: Kevin Hilman <[email protected]>
Tested-by: Kevin Hilman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Add the wakeup-source to enable this device as a wakeup source if
defined in DT.
Signed-off-by: Markus Schneider-Pargmann <[email protected]>
Acked-by: Conor Dooley <[email protected]>
Reviewed-by: Kevin Hilman <[email protected]>
Tested-by: Kevin Hilman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The interrupt handler routines and helpers are casting the 'void *'
pointer to 'struct exynos_uart_port *' all over the place.
There is no need for that, we can do the casting once and keep passing
the 'struct exynos_uart_port *', simplifying the code and saving a few
lines of code.
No functional changes.
Reviewed-by: Tudor Ambarus <[email protected]>
Signed-off-by: André Draszik <[email protected]>
Reviewed-by: Jiri Slaby <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The 'irq' argument is not used in any of the callees, we can just drop
it and simplify the code.
No functional changes.
Reviewed-by: Tudor Ambarus <[email protected]>
Signed-off-by: André Draszik <[email protected]>
Reviewed-by: Jiri Slaby <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Commit a0821ca14bb8 ("media: atomisp: Remove test pattern generator (TPG)
support") broke BYT support because it removed a seemingly unused field
from struct sh_css_sp_config and a seemingly unused value from enum
ia_css_input_mode.
But these are part of the ABI between the kernel and firmware on ISP2400
and this part of the TPG support removal changes broke ISP2400 support.
ISP2401 support was not affected because on ISP2401 only a part of
struct sh_css_sp_config is used.
Restore the removed field and enum value to fix this.
Fixes: a0821ca14bb8 ("media: atomisp: Remove test pattern generator (TPG) support")
Cc: [email protected]
Signed-off-by: Hans de Goede <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
|
|
Commit 558abc7e3f89 ("perf: Fix event_function_call() locking") lost
IRQ disabling by mistake.
Fixes: 558abc7e3f89 ("perf: Fix event_function_call() locking")
Reported-by: Pengfei Xu <[email protected]>
Reported-by: Naresh Kamboju <[email protected]>
Tested-by: Pengfei Xu <[email protected]>
Signed-off-by: Namhyung Kim <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
|
|
This adds another disk accounting counter to track usage per inode
number (any snapshot ID).
This will be used for a couple things:
- It'll give us a way to tell the user how much space a given file ista
consuming in all snapshots; i.e. how much extra space it's consuming
due to snapshot versioning.
- It counts number of extents and total size of extents (both in btree
keyspace sectors and actual disk usage), meaning it gives us average
extent size: that is, it'll let us cheaply find fragmented files that
should be defragmented.
Signed-off-by: Kent Overstreet <[email protected]>
|
|
The next patch will be adding a disk accounting counter type which is
not kept in the in-memory eytzinger tree.
As prep, fold __bch2_accounting_mem_mod() into
bch2_accounting_mem_mod_locked() so that we can check for that counter
type and bail out without calling bpos_to_disk_accounting_pos() twice.
Signed-off-by: Kent Overstreet <[email protected]>
|
|
bkey_fsck_err() was added as an interface that looks like fsck_err(),
but previously all it did was ensure that the appropriate error counter
was incremented in the superblock.
This is a cleanup and bugfix patch that converts it to a wrapper around
fsck_err(). This is needed to fix an issue with the upgrade path to
disk_accounting_v3, where the "silent fix" error list now includes
bkey_fsck errors; fsck_err() handles this in a unified way, and since we
need to change printing of bkey fsck errors from the caller to the inner
bkey_fsck_err() calls, this ends up being a pretty big change.
Als,, rename .invalid() methods to .validate(), for clarity, while we're
changing the function signature anyways (to drop the printbuf argument).
Signed-off-by: Kent Overstreet <[email protected]>
|
|
Signed-off-by: Kent Overstreet <[email protected]>
|
|
Signed-off-by: Kent Overstreet <[email protected]>
|
|
include information about the state of the btree key cache
Signed-off-by: Kent Overstreet <[email protected]>
|
|
This helps ensure key cache reclaim isn't contending with threads
waiting for the key cache to be helped, and fixes a severe performance
bug.
Signed-off-by: Kent Overstreet <[email protected]>
|
|
If we need to increase the tree depth, allocate a new node, and then
race with another thread that increased the tree depth before us, we'll
still have a preallocated node that might be used later.
If we then use that node for a new non-root node, it'll still have a
pointer to the old root instead of being zeroed - fix this by zeroing it
in the cmpxchg failure path.
Signed-off-by: Kent Overstreet <[email protected]>
|
|
for_each_btree_node() now works similarly to for_each_btree_key(), where
the loop body is passed as an argument to be passed to lockrestart_do().
This now calls trans_begin() on every loop iteration - which fixes an
SRCU warning in backpointers fsck.
Signed-off-by: Kent Overstreet <[email protected]>
|
|
Signed-off-by: Kent Overstreet <[email protected]>
|
|
forward compat fix
Signed-off-by: Kent Overstreet <[email protected]>
|
|
Signed-off-by: Kent Overstreet <[email protected]>
|
|
bch2_trigger_alloc was assuming that the new key would always be newly
created and thus always an alloc_v4 key, but - not when called from
btree_gc.
Signed-off-by: Kent Overstreet <[email protected]>
|
|
bch2_btree_path_traverse_cached() was previously checking if it could
just relock the path, which is a common idiom in path traversal.
However, it was using btree_node_relock(), not btree_path_relock();
btree_path_relock() only succeeds if the path was in state
BTREE_ITER_NEED_RELOCK.
If the path was in state BTREE_ITER_NEED_TRAVERSE a full traversal is
needed; this led to a null ptr deref in
bch2_btree_path_traverse_cached().
And the short circuit check here isn't needed, since it was already done
in the main bch2_btree_path_traverse_one().
Signed-off-by: Kent Overstreet <[email protected]>
|
|
Keep the URL in a single line for easier copy-pasting.
Signed-off-by: Enguerrand de Ribaucourt <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Acked-by: Arun Ramadoss <[email protected]>
Link: https://patch.msgid.link/20240812124346.597702-1-enguerrand.de-ribaucourt@savoirfairelinux.com
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The value passed as the l3_proto argument of mvneta_txq_desc_csum()
is __be16. And mvneta_txq_desc_csum uses this parameter as a __be16
value. So use __be16 as the type for the parameter, rather than
type with host byte order.
Flagged by Sparse as:
.../mvneta.c:1796:25: warning: restricted __be16 degrades to integer
.../mvneta.c:1979:45: warning: incorrect type in argument 2 (different base types)
.../mvneta.c:1979:45: expected int l3_proto
.../mvneta.c:1979:45: got restricted __be16 [usertype] l3_proto
No functional change intended.
Flagged by Sparse.
Signed-off-by: Simon Horman <[email protected]>
Reviewed-by: Marcin Wojtas <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
`fec_ptp_pps_perout()` reimplements logic already
in `fec_ptp_read()`. Replace with function call.
Signed-off-by: Csókás, Bence <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
This function is used in `fec_ptp_enable_pps()` through
struct cyclecounter read(). Moving the declaration makes
it clearer, what's happening.
Suggested-by: Frank Li <[email protected]>
Link: https://lore.kernel.org/netdev/[email protected]/T/#ma6c21ad264016c24612048b1483769eaff8cdf20
Signed-off-by: Csókás, Bence <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
ssn_offset field is u32 and is placed into the netlink response with
nla_put_u32(), but only 2 bytes are reserved for the attribute payload
in subflow_get_info_size() (even though it makes no difference
in the end, as it is aligned up to 4 bytes). Supply the correct
argument to the relevant nla_total_size() call to make it less
confusing.
Fixes: 5147dfb50832 ("mptcp: allow dumping subflow context to userspace")
Signed-off-by: Eugene Syromiatnikov <[email protected]>
Reviewed-by: Matthieu Baerts (NGI0) <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
'struct config_item_type' is not modified in this driver.
This structure is only used with config_group_init_type_name() which takes
a const struct config_item_type* as a 3rd argument.
This also makes things consistent with 'netconsole_target_type' witch is
already const.
Constifying this structure moves some data to a read-only section, so
increase overall security, especially when the structure holds some
function pointers.
On a x86_64, with allmodconfig:
Before:
======
text data bss dec hex filename
33007 3952 1312 38271 957f drivers/net/netconsole.o
After:
=====
text data bss dec hex filename
33071 3888 1312 38271 957f drivers/net/netconsole.o
Signed-off-by: Christophe JAILLET <[email protected]>
Reviewed-by: Breno Leitao <[email protected]>
Link: https://patch.msgid.link/9c205b2b4bdb09fc9e9d2cb2f2936ec053da1b1b.1723325900.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Ziwei Xiao says:
====================
gve: Add RSS config support
These two patches are used to add RSS config support in GVE driver
between the device and ethtool.
v2: https://lore.kernel.org/[email protected]
====================
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Introduce adminq commands to configure and retrieve RSS settings from
the device. Implement corresponding ethtool ops for user-level
management.
Signed-off-by: Jeroen de Borst <[email protected]>
Co-developed-by: Ziwei Xiao <[email protected]>
Signed-off-by: Ziwei Xiao <[email protected]>
Signed-off-by: Praveen Kaligineedi <[email protected]>
Reviewed-by: Praveen Kaligineedi <[email protected]>
Reviewed-by: Harshitha Ramamurthy <[email protected]>
Reviewed-by: Willem de Bruijn <[email protected]>
Reviewed-by: Hariprasad Kelam <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Add a device option to inform the driver about the hash key size and
hash table size used by the device. This information will be stored and
made available for RSS ethtool operations.
Signed-off-by: Ziwei Xiao <[email protected]>
Signed-off-by: Praveen Kaligineedi <[email protected]>
Reviewed-by: Praveen Kaligineedi <[email protected]>
Reviewed-by: Harshitha Ramamurthy <[email protected]>
Reviewed-by: Willem de Bruijn <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
On little-endian systems, doing subtraction after htons()
leads to interesting results:
Given:
MAGIC_BYTES = 123 = 0x007B aka. in big endian: 0x7B00 = 31488
sizeof(struct iphdr) = 20
Before this patch:
__bpf_constant_htons(MAGIC_BYTES) - sizeof(struct iphdr) = 0x7AEC
0x7AEC = htons(0xEC7A) = htons(60538)
So these were outer IP packets with a total length of 123 bytes,
containing an inner IP packet with a total length of 60538 bytes.
After this patch:
__bpf_constant_htons(MAGIC_BYTES - sizeof(struct iphdr)) = htons(103)
Now these packets are outer IP packets with a total length of 123 bytes,
containing an inner IP packet with a total length of 103 bytes.
Signed-off-by: Asbjørn Sloth Tønnesen <[email protected]>
Reviewed-by: Toke Høiland-Jørgensen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin KaFai Lau <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull execve fixes from Kees Cook:
- binfmt_flat: Fix corruption when not offsetting data start
- exec: Fix ToCToU between perm check and set-uid/gid usage
* tag 'execve-v6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
exec: Fix ToCToU between perm check and set-uid/gid usage
binfmt_flat: Fix corruption when not offsetting data start
|
|
Replace additionalProperties with unevaluatedProperties because it have
allOf: $ref: ethernet-controller.yaml#.
Remove all properties, which already defined in ethernet-controller.yaml.
Fixed below CHECK_DTBS warnings:
arch/arm64/boot/dts/freescale/fsl-lx2160a-bluebox3.dtb:
fsl-mc@80c000000: dpmacs:ethernet@11: 'fixed-link' does not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/misc/fsl,qoriq-mc.yaml#
Signed-off-by: Frank Li <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
All failure exits prior to fdget() leave the scope, all matching fdput()
are immediately followed by leaving the scope.
Reviewed-by: Christian Brauner <[email protected]>
Signed-off-by: Al Viro <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
|
|
fdget() is the first thing done in scope, all matching fdput() are
immediately followed by leaving the scope.
Reviewed-by: Christian Brauner <[email protected]>
Signed-off-by: Al Viro <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
|
|
Calling conventions for __bpf_map_get() would be more convenient
if it left fpdut() on failure to callers. Makes for simpler logics
in the callers.
Among other things, the proof of memory safety no longer has to
rely upon file->private_data never being ERR_PTR(...) for bpffs files.
Original calling conventions made it impossible for the caller to tell
whether __bpf_map_get() has returned ERR_PTR(-EINVAL) because it has found
the file not be a bpf map one (in which case it would've done fdput())
or because it found that ERR_PTR(-EINVAL) in file->private_data of a
bpf map file (in which case fdput() would _not_ have been done).
Signed-off-by: Al Viro <[email protected]>
Reviewed-by: Christian Brauner <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
|
|
Factor out the logic to extract bpf_map instances from FD embedded in
bpf_insns, adding it to the list of used_maps (unless it's already
there, in which case we just reuse map's index). This simplifies the
logic in resolve_pseudo_ldimm64(), especially around `struct fd`
handling, as all that is now neatly contained in the helper and doesn't
leak into a dozen error handling paths.
Signed-off-by: Andrii Nakryiko <[email protected]>
|
|
Swith fdget_raw() use cases in bpf_inode_storage.c to CLASS(fd_raw).
Reviewed-by: Christian Brauner <[email protected]>
Signed-off-by: Al Viro <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
|
|
Add the missing geni_icc_disable() call before returning in the
geni_i2c_runtime_resume() function.
Commit 9ba48db9f77c ("i2c: qcom-geni: Add missing
geni_icc_disable in geni_i2c_runtime_resume") by Gaosheng missed
disabling the interconnect in one case.
Fixes: bf225ed357c6 ("i2c: i2c-qcom-geni: Add interconnect support")
Cc: Gaosheng Cui <[email protected]>
Cc: [email protected] # v5.9+
Signed-off-by: Andi Shyti <[email protected]>
|
|
Irregularity here is fdput() not in the same scope as fdget();
just fold ____bpf_prog_get() into its (only) caller and that's
it...
Signed-off-by: Al Viro <[email protected]>
Acked-by: Andrii Nakryiko <[email protected]>
Reviewed-by: Christian Brauner <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
|
|
Correct spelling problems for Documentation/networking/ as reported
by ispell.
Signed-off-by: Jing-Ping Jan <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Add support for offloading cls U32 filters. Only "skbedit queue_mapping"
and "drop" actions are supported. Also, only "ip" and "802_3" tc
protocols are allowed. The PF must advertise the VIRTCHNL_VF_OFFLOAD_TC_U32
capability flag.
Since the filters will be enabled via the FD stage at the PF, a new type
of FDIR filters is added and the existing list and state machine are used.
The new filters can be used to configure flow directors based on raw
(binary) pattern in the rx packet.
Examples:
0. # tc qdisc add dev enp175s0v0 ingress
1. Redirect UDP from src IP 192.168.2.1 to queue 12:
# tc filter add dev <dev> protocol ip ingress u32 \
match u32 0x45000000 0xff000000 at 0 \
match u32 0x00110000 0x00ff0000 at 8 \
match u32 0xC0A80201 0xffffffff at 12 \
match u32 0x00000000 0x00000000 at 24 \
action skbedit queue_mapping 12 skip_sw
2. Drop all ICMP:
# tc filter add dev <dev> protocol ip ingress u32 \
match u32 0x45000000 0xff000000 at 0 \
match u32 0x00010000 0x00ff0000 at 8 \
match u32 0x00000000 0x00000000 at 24 \
action drop skip_sw
3. Redirect ICMP traffic from MAC 3c:fd:fe:a5:47:e0 to queue 7
(note proto: 802_3):
# tc filter add dev <dev> protocol 802_3 ingress u32 \
match u32 0x00003CFD 0x0000ffff at 4 \
match u32 0xFEA547E0 0xffffffff at 8 \
match u32 0x08004500 0xffffff00 at 12 \
match u32 0x00000001 0x000000ff at 20 \
match u32 0x0000 0x0000 at 40 \
action skbedit queue_mapping 7 skip_sw
Notes on matches:
1 - All intermediate fields that are needed to parse the correct PTYPE
must be provided (in e.g. 3: Ethernet Type 0x0800 in MAC, IP version
and IP length: 0x45 and protocol: 0x01 (ICMP)).
2 - The last match must provide an offset that guarantees all required
headers are accounted for, even if the last header is not matched.
For example, in #2, the last match is 4 bytes at offset 24 starting
from IP header, so the total is 14 (MAC) + 24 + 4 = 42, which is the
sum of MAC+IP+ICMP headers.
Reviewed-by: Sridhar Samudrala <[email protected]>
Reviewed-by: Marcin Szycik <[email protected]>
Signed-off-by: Ahmed Zaki <[email protected]>
Tested-by: Rafal Romanowski <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
|
|
In preparation for a second type of FDIR filters that can be added by
tc-u32, move the add/del of the FDIR logic to be entirely contained in
iavf_fdir.c.
The iavf_find_fdir_fltr_by_loc() is renamed to iavf_find_fdir_fltr()
to be more agnostic to the filter ID parameter (for now @loc, which is
relevant only to current FDIR filters added via ethtool).
The FDIR filter deletion is moved from iavf_del_fdir_ethtool() in
ethtool.c to iavf_fdir_del_fltr(). While at it, fix a minor bug where
the "fltr" is accessed out of the fdir_fltr_lock spinlock protection.
Reviewed-by: Sridhar Samudrala <[email protected]>
Reviewed-by: Marcin Szycik <[email protected]>
Signed-off-by: Ahmed Zaki <[email protected]>
Tested-by: Rafal Romanowski <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
|
|
Enable VFs to create FDIR filters from raw binary patterns.
The corresponding processes for raw flow are added in the
Parse / Create / Destroy stages.
Reviewed-by: Marcin Szycik <[email protected]>
Signed-off-by: Junfeng Guo <[email protected]>
Co-developed-by: Ahmed Zaki <[email protected]>
Signed-off-by: Ahmed Zaki <[email protected]>
Tested-by: Rafal Romanowski <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
|
|
The SWAP Flag in the FDIR Programming Descriptor doesn't work properly,
it is always set and cannot be unset (hardware bug). Thus, add a method
to effectively disable the FDIR SWAP option by setting the FDSWAP instead
of FDINSET registers.
Reviewed-by: Marcin Szycik <[email protected]>
Signed-off-by: Junfeng Guo <[email protected]>
Signed-off-by: Ahmed Zaki <[email protected]>
Tested-by: Rafal Romanowski <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
|
|
The patch extends existing virtchnl_proto_hdrs structure to allow VF
to pass a pair of buffers as packet data and mask that describe
a match pattern of a filter rule. Then the kernel PF driver is requested
to parse the pair of buffer and figure out low level hardware metadata
(ptype, profile, field vector.. ) to program the expected FDIR or RSS
rules.
Reviewed-by: Simon Horman <[email protected]>
Reviewed-by: Marcin Szycik <[email protected]>
Signed-off-by: Qi Zhang <[email protected]>
Signed-off-by: Junfeng Guo <[email protected]>
Signed-off-by: Ahmed Zaki <[email protected]>
Tested-by: Rafal Romanowski <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
|
|
Add API ice_parser_profile_init() to init a parser profile based on
a parser result and a mask buffer. The ice_parser_profile struct is used
by the low level FXP engine to create HW profile/field vectors.
Reviewed-by: Marcin Szycik <[email protected]>
Signed-off-by: Qi Zhang <[email protected]>
Signed-off-by: Junfeng Guo <[email protected]>
Signed-off-by: Ahmed Zaki <[email protected]>
Tested-by: Rafal Romanowski <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
|
|
Add support for the vxlan, geneve, ecpri UDP tunnels through the
following APIs:
- ice_parser_vxlan_tunnel_set()
- ice_parser_geneve_tunnel_set()
- ice_parser_ecpri_tunnel_set()
Reviewed-by: Simon Horman <[email protected]>
Reviewed-by: Marcin Szycik <[email protected]>
Signed-off-by: Qi Zhang <[email protected]>
Signed-off-by: Junfeng Guo <[email protected]>
Signed-off-by: Ahmed Zaki <[email protected]>
Tested-by: Rafal Romanowski <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
|
|
Add API ice_parser_dvm_set() to support turning on/off the parser's double
vlan mode.
Reviewed-by: Marcin Szycik <[email protected]>
Signed-off-by: Qi Zhang <[email protected]>
Signed-off-by: Junfeng Guo <[email protected]>
Co-developed-by: Ahmed Zaki <[email protected]>
Signed-off-by: Ahmed Zaki <[email protected]>
Tested-by: Rafal Romanowski <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
|