| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
In check_matching_type(), it'd be easier to display the typename in
question if it's available.
For example, check out the line starts with 'chk'.
-----------------------------------------------------------
find data type for 0x10(reg0) at cpuacct_charge+0x13
CU for kernel/sched/build_utility.c (die:0x137ee0b)
frame base: cfa=1 fbreg=7
scope: [3/3] (die:13d9632)
bb: [c - 13]
var [c] reg5 type='struct task_struct*' size=0x8 (die:0x1381230)
mov [c] 0xdf8(reg5) -> reg0 type='struct css_set*' size=0x8 (die:0x1385c56)
chk [13] reg0 offset=0x10 ok=1 kind=1 (struct css_set*) : Good! <<<--- here
found by insn track: 0x10(reg0) type-offset=0x10
final result: type='struct css_set' size=0x250 (die:0x1385b0e)
Another example:
-----------------------------------------------------------
find data type for 0x8(reg0) at menu_select+0x279
CU for drivers/cpuidle/governors/menu.c (die:0x7b0fe79)
frame base: cfa=1 fbreg=7
scope: [2/2] (die:7b11010)
bb: [273 - 277]
bb: [279 - 279]
chk [279] reg0 offset=0x8 ok=0 kind=0 cfa : no type information
scope: [1/2] (die:7b10cbc)
bb: [0 - 64]
...
mov [26a] imm=0xffffffff -> reg15
bb: [273 - 277]
bb: [279 - 279]
chk [279] reg0 offset=0x8 ok=1 kind=1 (long long unsigned int) : no/void pointer <<<--- here
final result: no/void pointer
Also change some places to print negative offsets properly.
Before:
-----------------------------------------------------------
find data type for 0xffffff40(reg6) at __tcp_transmit_skb+0x58
After:
-----------------------------------------------------------
find data type for -0xc0(reg6) at __tcp_transmit_skb+0x58
Signed-off-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Athira Rajeev <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Eduard Zingerman says:
====================
support bpf_fastcall patterns for calls to kfuncs
As an extension of [1], allow bpf_fastcall patterns for kfuncs:
- pattern rules are the same as for helpers;
- spill/fill removal is allowed only for kfuncs listed in the
is_fastcall_kfunc_call (under assumption that such kfuncs would
always be members of special_kfunc_list).
Allow bpf_fastcall rewrite for bpf_cast_to_kern_ctx() and
bpf_rdonly_cast() in order to conjure selftests for this feature.
After this patch-set verifier would rewrite the program below:
r2 = 1
*(u64 *)(r10 - 32) = r2
call %[bpf_cast_to_kern_ctx]
r2 = *(u64 *)(r10 - 32)
r0 = r2;"
As follows:
r2 = 1 /* spill/fill at r10[-32] is removed */
r0 = r1 /* replacement for bpf_cast_to_kern_ctx() */
r0 = r2
exit
Also, attribute used by LLVM implementation of the feature had been
changed from no_caller_saved_registers to bpf_fastcall (see [2]).
This patch-set replaces references to nocsr by references to
bpf_fastcall to keep LLVM and Kernel parts in sync.
[1] no_caller_saved_registers attribute for helper calls
https://lore.kernel.org/bpf/[email protected]/
[2] [BPF] introduce __attribute__((bpf_fastcall))
https://github.com/llvm/llvm-project/pull/105417
Changes v2->v3:
- added a patch fixing arch_mask handling in test_loader,
otherwise newly added tests for the feature were skipped
(a fix for regression introduced by a recent commit);
- fixed warning regarding unused 'params' variable;
- applied stylistical fixes suggested by Yonghong;
- added acks from Yonghong;
Changes v1->v2:
- added two patches replacing all mentions of nocsr by bpf_fastcall
(suggested by Andrii);
- removed KF_NOCSR flag (suggested by Yonghong).
v1: https://lore.kernel.org/bpf/[email protected]/
v2: https://lore.kernel.org/bpf/[email protected]/
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Use kfunc_bpf_cast_to_kern_ctx() and kfunc_bpf_rdonly_cast() to verify
that bpf_fastcall pattern is recognized for kfunc calls.
Acked-by: Yonghong Song <[email protected]>
Signed-off-by: Eduard Zingerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
If test case does not specify architecture via __arch_* macro consider
that it should be run for all architectures.
Fixes: 7d743e4c759c ("selftests/bpf: __jited test tag to check disassembly after jit")
Signed-off-by: Eduard Zingerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
do_misc_fixups() relaces bpf_cast_to_kern_ctx() and bpf_rdonly_cast()
by a single instruction "r0 = r1". This follows bpf_fastcall contract.
This commit allows bpf_fastcall pattern rewrite for these two
functions in order to use them in bpf_fastcall selftests.
Acked-by: Yonghong Song <[email protected]>
Signed-off-by: Eduard Zingerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Recognize bpf_fastcall patterns around kfunc calls.
For example, suppose bpf_cast_to_kern_ctx() follows bpf_fastcall
contract (which it does), in such a case allow verifier to rewrite BPF
program below:
r2 = 1;
*(u64 *)(r10 - 32) = r2;
call %[bpf_cast_to_kern_ctx];
r2 = *(u64 *)(r10 - 32);
r0 = r2;
By removing the spill/fill pair:
r2 = 1;
call %[bpf_cast_to_kern_ctx];
r0 = r2;
Acked-by: Yonghong Song <[email protected]>
Signed-off-by: Eduard Zingerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Attribute used by LLVM implementation of the feature had been changed
from no_caller_saved_registers to bpf_fastcall (see [1]).
This commit replaces references to nocsr by references to bpf_fastcall
to keep LLVM and selftests parts in sync.
[1] https://github.com/llvm/llvm-project/pull/105417
Acked-by: Yonghong Song <[email protected]>
Signed-off-by: Eduard Zingerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Attribute used by LLVM implementation of the feature had been changed
from no_caller_saved_registers to bpf_fastcall (see [1]).
This commit replaces references to nocsr by references to bpf_fastcall
to keep LLVM and Kernel parts in sync.
[1] https://github.com/llvm/llvm-project/pull/105417
Acked-by: Yonghong Song <[email protected]>
Signed-off-by: Eduard Zingerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
The __die_find_member_offset_cb() missed to handle bitfield members
which don't have DW_AT_data_member_location. Like in adding member
types in __add_member_cb() it should fallback to check the bit offset
when it resolves the member type for an offset.
Fixes: 437683a9941891c1 ("perf dwarf-aux: Handle type transfer for memory access")
Signed-off-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Athira Rajeev <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Masami Hiramatsu <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
It's now possible to declare instances of struct regmap_config as
const data.
Signed-off-by: Richard Fitzgerald <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
In arraymap.c:
In bpf_array_map_seq_start() and bpf_array_map_seq_next()
cast return values from the __percpu address space to
the generic address space via uintptr_t [1].
Correct the declaration of pptr pointer in __bpf_array_map_seq_show()
to void __percpu * and cast the value from the generic address
space to the __percpu address space via uintptr_t [1].
In hashtab.c:
Assign the return value from bpf_mem_cache_alloc() to void pointer
and cast the value to void __percpu ** (void pointer to percpu void
pointer) before dereferencing.
In memalloc.c:
Explicitly declare __percpu variables.
Cast obj to void __percpu **.
In helpers.c:
Cast ptr in BPF_CALL_1 and BPF_CALL_2 from generic address space
to __percpu address space via const uintptr_t [1].
Found by GCC's named address space checks.
There were no changes in the resulting object files.
[1] https://sparse.docs.kernel.org/en/latest/annotations.html#address-space-name
Signed-off-by: Uros Bizjak <[email protected]>
Cc: Alexei Starovoitov <[email protected]>
Cc: Daniel Borkmann <[email protected]>
Cc: Andrii Nakryiko <[email protected]>
Cc: Martin KaFai Lau <[email protected]>
Cc: Eduard Zingerman <[email protected]>
Cc: Song Liu <[email protected]>
Cc: Yonghong Song <[email protected]>
Cc: John Fastabend <[email protected]>
Cc: KP Singh <[email protected]>
Cc: Stanislav Fomichev <[email protected]>
Cc: Hao Luo <[email protected]>
Cc: Jiri Olsa <[email protected]>
Acked-by: Eduard Zingerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
'bpf-fix-null-pointer-access-for-malformed-bpf_core_type_id_local-relos'
Eduard Zingerman says:
====================
bpf: fix null pointer access for malformed BPF_CORE_TYPE_ID_LOCAL relos
Liu RuiTong reported an in-kernel null pointer derefence when
processing BPF_CORE_TYPE_ID_LOCAL relocations referencing non-existing
BTF types. Fix this by adding proper id checks.
Changes v2->v3:
- selftest update suggested by Andrii:
avoid memset(0) for log buffer and do memset(0) for bpf_attr.
Changes v1->v2:
- moved check from bpf_core_calc_relo_insn() to bpf_core_apply()
now both in kernel and in libbpf relocation type id is guaranteed
to exist when bpf_core_calc_relo_insn() is called;
- added a test case.
v1: https://lore.kernel.org/bpf/[email protected]/
v2: https://lore.kernel.org/bpf/[email protected]/
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Check that verifier rejects BPF program containing relocation
pointing to non-existent BTF type.
To force relocation resolution on kernel side test case uses
bpf_attr->core_relos field. This field is not exposed by libbpf,
so directly do BPF system call in the test.
Signed-off-by: Eduard Zingerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
In case of malformed relocation record of kind BPF_CORE_TYPE_ID_LOCAL
referencing a non-existing BTF type, function bpf_core_calc_relo_insn
would cause a null pointer deference.
Fix this by adding a proper check upper in call stack, as malformed
relocation records could be passed from user space.
Simplest reproducer is a program:
r0 = 0
exit
With a single relocation record:
.insn_off = 0, /* patch first instruction */
.type_id = 100500, /* this type id does not exist */
.access_str_off = 6, /* offset of string "0" */
.kind = BPF_CORE_TYPE_ID_LOCAL,
See the link for original reproducer or next commit for a test case.
Fixes: 74753e1462e7 ("libbpf: Replace btf__type_by_id() with btf_type_by_id().")
Reported-by: Liu RuiTong <[email protected]>
Closes: https://lore.kernel.org/bpf/CAK55_s6do7C+DVwbwY_7nKfUz0YLDoiA1v6X3Y9+p0sWzipFSA@mail.gmail.com/
Acked-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Eduard Zingerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
smb2_allocate_rsp_buf() will return other error code except -ENOMEM.
Signed-off-by: ChenXiaoSong <[email protected]>
Acked-by: Namjae Jeon <[email protected]>
Signed-off-by: Steve French <[email protected]>
|
|
The variable is already true here.
Signed-off-by: ChenXiaoSong <[email protected]>
Acked-by: Namjae Jeon <[email protected]>
Signed-off-by: Steve French <[email protected]>
|
|
null-ptr-deref will occur when (req_op_level == SMB2_OPLOCK_LEVEL_LEASE)
and parse_lease_state() return NULL.
Fix this by check if 'lease_ctx_info' is NULL.
Additionally, remove the redundant parentheses in
parse_durable_handle_context().
Signed-off-by: ChenXiaoSong <[email protected]>
Signed-off-by: Steve French <[email protected]>
|
|
In most error cases, error code is not returned in smb2_open(),
__process_request() will not print error message.
Fix this by returning the correct value at the end of smb2_open().
Signed-off-by: ChenXiaoSong <[email protected]>
Acked-by: Namjae Jeon <[email protected]>
Signed-off-by: Steve French <[email protected]>
|
|
When STATUS_NO_MORE_FILES status is set to smb2 query dir response,
->StructureSize is set to 9, which mean buffer has 1 byte.
This issue occurs because ->Buffer[1] in smb2_query_directory_rsp to
flex-array.
Fixes: eb3e28c1e89b ("smb3: Replace smb2pdu 1-element arrays with flex-arrays")
Cc: [email protected] # v6.1+
Signed-off-by: Namjae Jeon <[email protected]>
Signed-off-by: Steve French <[email protected]>
|
|
rht_bucket() does strange complicated things when a rehash is in
progress.
Instead, just skip scanning when a rehash is in progress: scanning is
going to be more expensive (many more empty slots to cover), and some
sort of infinite loop is being observed
Signed-off-by: Kent Overstreet <[email protected]>
|
|
fix a small leak
Signed-off-by: Kent Overstreet <[email protected]>
|
|
Additional changes:
- Add ref to common.yaml for child node.
- Add I2C node at example.
Fix below warning:
arch/arm64/boot/dts/freescale/imx8mq-librem5-r2.dtb: /soc@0/bus@30800000/i2c@30a40000/backlight@36:
failed to match any schema with compatible: ['ti,lm36922']
Signed-off-by: Frank Li <[email protected]>
Reviewed-by: Conor Dooley <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Lee Jones <[email protected]>
|
|
Simplify the code a bunch by using managed resource helpers.
Also, there is no need to save clk pointer anymore.
Suggested-by: Christophe JAILLET <[email protected]>
Signed-off-by: Huan Yang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Lee Jones <[email protected]>
|
|
Drop the manual access to the fwnode of the device to iterate over its
child nodes. `device_for_each_child_node` macro provides direct access
to the child nodes, and given that the `child` variable is only required
within the loop, the scoped variant of the macro can be used.
Use the `device_for_each_child_node_scoped` macro to iterate over the
direct child nodes of the device.
Signed-off-by: Javier Carrasco <[email protected]>
Acked-by: Sakari Ailus <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Lee Jones <[email protected]>
|
|
Describe what the subsystem does, how the consumers and providers work
and add API reference generated from kerneldocs.
Acked-by: Jonathan Corbet <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bartosz Golaszewski <[email protected]>
|
|
Simon Horman says:
====================
MAINTAINERS: Networking updates
This series includes Networking-related updates to MAINTAINERS.
* Patches 1-4 aim to assign header files with "*net*' and '*skbuff*'
in their name to Networking-related sections within Maintainers.
There are a few such files left over after this patches.
I have to sent separate patches to add them to SCSI SUBSYSTEM
and NETWORKING DRIVERS (WIRELESS) sections [1][2].
[1] https://lore.kernel.org/linux-scsi/[email protected]/
[2] https://lore.kernel.org/linux-wireless/[email protected]/
* Patch 5 updates the status of the JME driver to 'Odd Fixes'
====================
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
|
|
This driver only appears to have received sporadic clean-ups, typically
part of some tree-wide activity, and fixes for quite some time. And
according to the maintainer, Guo-Fu Tseng, the device has been EOLed for
a long time (see Link).
Accordingly, it seems appropriate to mark this driver as odd fixes.
Cc: Moon Yeounsu <[email protected]>
Cc: Guo-Fu Tseng <[email protected]>
Link: https://lore.kernel.org/netdev/[email protected]/
Signed-off-by: Simon Horman <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
This is part of an effort to assign a section in MAINTAINERS to header
files that relate to Networking. In this case the files with "net" or
"skbuff" in their name.
This patch adds a number of such files to the NETWORKING DRIVERS
and NETWORKING [GENERAL] sections.
Signed-off-by: Simon Horman <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
This aims to add limited globs to improve the coverage of header files
in the NETWORKING DRIVERS and NETWORKING [GENERAL] sections.
It is done so in a minimal way to exclude overlap with other sections.
And so as not to require "X" entries to exclude files otherwise
matched by these new globs.
While imperfect, due to it's limited nature, this does extend coverage
of header files by these sections. And aims to automatically cover
new files that seem very likely belong to these sections.
The include/linux/netdev* glob (both sections)
+ Subsumes the entries for:
- include/linux/netdevice.h
+ Extends the sections to cover
- include/linux/netdevice_xmit.h
- include/linux/netdev_features.h
The include/uapi/linux/netdev* globs: (both sections)
+ Subsumes the entries for:
- include/linux/netdevice.h
+ Extends the sections to cover
- include/linux/netdev.h
The include/linux/skbuff* glob (NETWORKING [GENERAL] section only):
+ Subsumes the entry for:
- include/linux/skbuff.h
+ Extends the section to cover
- include/linux/skbuff_ref.h
A include/uapi/linux/net_* glob was not added to the NETWORKING [GENERAL]
section. Although it would subsume the entry for
include/uapi/linux/net_namespace.h, which is fine, it would also extend
coverage to:
- include/uapi/linux/net_dropmon.h, which belongs to the
NETWORK DROP MONITOR section
- include/uapi/linux/net_tstamp.h which, as per an earlier patch in this
series, belongs to the SOCKET TIMESTAMPING section
Signed-off-by: Simon Horman <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
This is part of an effort to assign a section in MAINTAINERS to header
files that relate to Networking. In this case the files with "net" in
their name.
Cc: Richard Cochran <[email protected]>
Cc: Willem de Bruijn <[email protected]>
Signed-off-by: Simon Horman <[email protected]>
Acked-by: Willem de Bruijn <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
This is part of an effort to assign a section in MAINTAINERS to header
files that relate to Networking. In this case the files with "net" in
their name.
It seems that sonet.h is included in ATM related source files,
and thus that ATM is the most relevant section for these files.
Cc: Chas Williams <[email protected]>
Signed-off-by: Simon Horman <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
Use scoped for_each_available_child_of_node_scoped() when iterating over
device nodes to make code a bit simpler.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Lee Jones <[email protected]>
|
|
Use scoped for_each_available_child_of_node_scoped() when iterating over
device nodes to make code a bit simpler.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Marek Behún <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Lee Jones <[email protected]>
|
|
Use scoped for_each_available_child_of_node_scoped() when iterating over
device nodes to make code a bit simpler.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Lee Jones <[email protected]>
|
|
Use scoped for_each_available_child_of_node_scoped() when iterating over
device nodes to make code a bit simpler.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Lee Jones <[email protected]>
|
|
Use scoped for_each_available_child_of_node_scoped() when iterating over
device nodes to make code a bit simpler.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Lee Jones <[email protected]>
|
|
Use scoped for_each_available_child_of_node_scoped() when iterating over
device nodes to make code a bit simpler.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Lee Jones <[email protected]>
|
|
Obtain the device node reference with scoped/cleanup.h to reduce error
handling and make the code a bit simpler.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Lee Jones <[email protected]>
|
|
Use scoped for_each_available_child_of_node_scoped() when iterating over
device nodes to make code a bit simpler.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Lee Jones <[email protected]>
|
|
Use scoped for_each_available_child_of_node_scoped() when iterating over
device nodes to make code a bit simpler.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Lee Jones <[email protected]>
|
|
Use scoped for_each_available_child_of_node_scoped() when iterating over
device nodes to make code a bit simpler.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Lee Jones <[email protected]>
|
|
Use scoped for_each_available_child_of_node_scoped() when iterating over
device nodes to make code a bit simpler.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Lee Jones <[email protected]>
|
|
Use scoped for_each_available_child_of_node_scoped() when iterating over
device nodes to make code a bit simpler.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Lee Jones <[email protected]>
|
|
Use scoped for_each_available_child_of_node_scoped() when iterating over
device nodes to make code a bit simpler.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Lee Jones <[email protected]>
|
|
Use scoped for_each_available_child_of_node_scoped() when iterating over
device nodes to make code a bit simpler.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Lee Jones <[email protected]>
|
|
At beginning of probe() function, the driver iterates over OF children
and assigns found device node for later. The code uses
for_each_available_child_of_node() which drops the references on
children on each successful pass, thus the probe function operates later
on the device node without holding the reference.
Fix this by increasing the reference count for found child node and
drop it at the end of the probe, because it is not needed further (the
V4L init code takes its own references).
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Lee Jones <[email protected]>
|
|
Obtain the device node reference with scoped/cleanup.h to reduce error
handling and make the code a bit simpler.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Lee Jones <[email protected]>
|
|
Obtain the device node reference with scoped/cleanup.h to reduce error
handling and make the code a bit simpler.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Lee Jones <[email protected]>
|
|
Let the kememdup_array() take care about multiplication and possible
overflows.
Signed-off-by: Yu Jiaoliang <[email protected]>
Signed-off-by: Louis Peens <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
|
|
Commit 6b0e82791bd0 ("powerpc/e500: switch to 64 bits PGD on 85xx
(32 bits)") switched PGD entries to 64 bits, but pgd_val() returns
an unsigned long which is 32 bits on PPC32. This is not a problem
for regular PMD entries because the upper part is always NULL, but
when PMD entries are leaf they contain 64 bits values, so pgd_val()
must return an unsigned long long instead of an unsigned long.
Also change the condition to CONFIG_PPC_85xx instead of CONFIG_PPC_E500
as the change was meant for 32 bits only. Allthough this should be
harmless on PPC64, it generates a warning with pgd_ERROR print.
Fixes: 6b0e82791bd0 ("powerpc/e500: switch to 64 bits PGD on 85xx (32 bits)")
Signed-off-by: Christophe Leroy <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://msgid.link/45f8fdf298ec3df7573b66d21b03a5cda92e2cb1.1724313510.git.christophe.leroy@csgroup.eu
|