| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Add '\n' for pr_err in function ovl_parse_param_lowerdir(), which
ensures that error message is displayed at once.
Fixes: b36a5780cb44 ("ovl: modify layer parameter parsing")
Signed-off-by: Zhihao Cheng <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Christian Brauner <[email protected]>
|
|
The max count of lowerdir is OVL_MAX_STACK[500], which is broken by
commit 37f32f526438("ovl: fix memory leak in ovl_parse_param()") for
parameter Opt_lowerdir. Since commit 819829f0319a("ovl: refactor layer
parsing helpers") and commit 24e16e385f22("ovl: add support for
appending lowerdirs one by one") added check ovl_mount_dir_check() in
function ovl_parse_param_lowerdir(), the 'ctx->nr' should be smaller
than OVL_MAX_STACK, after commit 37f32f526438("ovl: fix memory leak in
ovl_parse_param()") is applied, the 'ctx->nr' is updated before the
check ovl_mount_dir_check(), which leads the max count of lowerdir
to become 499 for parameter Opt_lowerdir.
Fix it by replacing lower layers parsing code with the existing helper
function ovl_parse_layer().
Fixes: 37f32f526438 ("ovl: fix memory leak in ovl_parse_param()")
Signed-off-by: Zhihao Cheng <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Amir Goldstein <[email protected]>
Signed-off-by: Christian Brauner <[email protected]>
|
|
So it can be used for parsing the Opt_lowerdir.
Signed-off-by: Zhihao Cheng <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Christian Brauner <[email protected]>
|
|
Since commit d492cc2573a0 ("driver core: device.h: make struct bus_type a
const *"), the driver core can properly handle constant struct bus_type,
move the pci_bus_type variable to be a constant structure as well, placing
it into read-only memory which can not be modified at runtime.
Link: https://lore.kernel.org/r/[email protected]
Suggested-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Kunwu Chan <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
|
|
There are no longer any users of the platform data for davinci rawnand
in board files. We can remove the public pdata headers and move the
structures that are still used into the driver compilation unit while
removing the rest.
Signed-off-by: Bartosz Golaszewski <[email protected]>
Signed-off-by: Miquel Raynal <[email protected]>
Link: https://lore.kernel.org/linux-mtd/[email protected]
|
|
Reporting an unclean read from SPI-NAND only when the maximum number
of correctable bitflip errors has been hit seems a bit late.
UBI LEB scrubbing, which depends on the lower MTD device reporting
correctable bitflips, then only kicks in when it's almost too late.
Set bitflip_threshold to 75% of the ECC strength, which is also the
default for raw NAND.
Signed-off-by: Daniel Golle <[email protected]>
Reviewed-by: Frieder Schrempf <[email protected]>
Signed-off-by: Miquel Raynal <[email protected]>
Link: https://lore.kernel.org/linux-mtd/2117e387260b0a96f95b8e1652ff79e0e2d71d53.1723427450.git.daniel@makrotopia.org
|
|
Add support for Winbond W25N01KV 1Gbit SPI-NAND.
It has 4-bit on-die ECC.
Signed-off-by: Robert Marko <[email protected]>
Signed-off-by: Miquel Raynal <[email protected]>
Link: https://lore.kernel.org/linux-mtd/[email protected]
|
|
When we are allocating an array, using kmemdup_array() to take care about
multiplication and possible overflows.
Also it makes auditing the code easier.
Signed-off-by: Yan Zhen <[email protected]>
Signed-off-by: Miquel Raynal <[email protected]>
Link: https://lore.kernel.org/linux-mtd/[email protected]
|
|
const
Don't populate the read-only array possible_nvram_sizes on the stack at
run time, instead make it static const.
Signed-off-by: Colin Ian King <[email protected]>
Signed-off-by: Miquel Raynal <[email protected]>
Link: https://lore.kernel.org/linux-mtd/[email protected]
|
|
Use of_property_read_bool() to read boolean properties rather than
of_get_property(). This is part of a larger effort to remove callers
of of_get_property() and similar functions. of_get_property() leaks
the DT property data pointer which is a problem for dynamically
allocated nodes which may be freed.
Signed-off-by: Rob Herring (Arm) <[email protected]>
Signed-off-by: Miquel Raynal <[email protected]>
Link: https://lore.kernel.org/linux-mtd/[email protected]
|
|
GCC 12.3.0 compiler on linux-next next-20240709 tree found the execution
path in which, due to lazy evaluation, devlength isn't initialised with the
parsed string:
289 while (map) {
290 devname = devstart = devlength = NULL;
291
292 if (!(devname = strsep(&map, ","))) {
293 E("slram: No devicename specified.\n");
294 break;
295 }
296 T("slram: devname = %s\n", devname);
297 if ((!map) || (!(devstart = strsep(&map, ",")))) {
298 E("slram: No devicestart specified.\n");
299 }
300 T("slram: devstart = %s\n", devstart);
→ 301 if ((!map) || (!(devlength = strsep(&map, ",")))) {
302 E("slram: No devicelength / -end specified.\n");
303 }
→ 304 T("slram: devlength = %s\n", devlength);
305 if (parse_cmdline(devname, devstart, devlength) != 0) {
306 return(-EINVAL);
307 }
Parsing should be finished after map == NULL, so a break is best inserted after
each E("slram: ... \n") error message.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: Miquel Raynal <[email protected]>
Cc: Richard Weinberger <[email protected]>
Cc: Vignesh Raghavendra <[email protected]>
Cc: [email protected]
Signed-off-by: Mirsad Todorovac <[email protected]>
Signed-off-by: Miquel Raynal <[email protected]>
Link: https://lore.kernel.org/linux-mtd/[email protected]
|
|
Add multi-uprobe and multi-uretprobe benchmarks to bench tool.
Multi- and classic uprobes/uretprobes have different low-level
triggering code paths, so it's sometimes important to be able to
benchmark both flavors of uprobes/uretprobes.
Sample examples from my dev machine below. Single-threaded peformance
almost doesn't differ, but with more parallel CPUs triggering the same
uprobe/uretprobe the difference grows. This might be due to [0], but
given the code is slightly different, there could be other sources of
slowdown.
Note, all these numbers will change due to ongoing work to improve
uprobe/uretprobe scalability (e.g., [1]), but having benchmark like this
is useful for measurements and debugging nevertheless.
\#!/bin/bash
set -eufo pipefail
for p in 1 8 16 32; do
for i in uprobe-nop uretprobe-nop uprobe-multi-nop uretprobe-multi-nop; do
summary=$(sudo ./bench -w1 -d3 -p$p -a trig-$i | tail -n1)
total=$(echo "$summary" | cut -d'(' -f1 | cut -d' ' -f3-)
percpu=$(echo "$summary" | cut -d'(' -f2 | cut -d')' -f1 | cut -d'/' -f1)
printf "%-21s (%2d cpus): %s (%s/s/cpu)\n" $i $p "$total" "$percpu"
done
echo
done
uprobe-nop ( 1 cpus): 1.020 ± 0.005M/s ( 1.020M/s/cpu)
uretprobe-nop ( 1 cpus): 0.515 ± 0.009M/s ( 0.515M/s/cpu)
uprobe-multi-nop ( 1 cpus): 1.036 ± 0.004M/s ( 1.036M/s/cpu)
uretprobe-multi-nop ( 1 cpus): 0.512 ± 0.005M/s ( 0.512M/s/cpu)
uprobe-nop ( 8 cpus): 3.481 ± 0.030M/s ( 0.435M/s/cpu)
uretprobe-nop ( 8 cpus): 2.222 ± 0.008M/s ( 0.278M/s/cpu)
uprobe-multi-nop ( 8 cpus): 3.769 ± 0.094M/s ( 0.471M/s/cpu)
uretprobe-multi-nop ( 8 cpus): 2.482 ± 0.007M/s ( 0.310M/s/cpu)
uprobe-nop (16 cpus): 2.968 ± 0.011M/s ( 0.185M/s/cpu)
uretprobe-nop (16 cpus): 1.870 ± 0.002M/s ( 0.117M/s/cpu)
uprobe-multi-nop (16 cpus): 3.541 ± 0.037M/s ( 0.221M/s/cpu)
uretprobe-multi-nop (16 cpus): 2.123 ± 0.026M/s ( 0.133M/s/cpu)
uprobe-nop (32 cpus): 2.524 ± 0.026M/s ( 0.079M/s/cpu)
uretprobe-nop (32 cpus): 1.572 ± 0.003M/s ( 0.049M/s/cpu)
uprobe-multi-nop (32 cpus): 2.717 ± 0.003M/s ( 0.085M/s/cpu)
uretprobe-multi-nop (32 cpus): 1.687 ± 0.007M/s ( 0.053M/s/cpu)
[0] https://lore.kernel.org/linux-trace-kernel/[email protected]/
[1] https://lore.kernel.org/linux-trace-kernel/[email protected]/
Signed-off-by: Andrii Nakryiko <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Preferred way to create kernel BOs is xe_managed_bo_create_pin_map, use
it.
Signed-off-by: Matthew Brost <[email protected]>
Reviewed-by: Lucas De Marchi <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Kernel BOs are destroyed with GGTT mappings, this is hardware
interaction so use devm.
Signed-off-by: Matthew Brost <[email protected]>
Reviewed-by: Lucas De Marchi <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Not a big deal if CT is down as driver is unloading, no need to warn.
Signed-off-by: Matthew Brost <[email protected]>
Reviewed-by: Jagmeet Randhawa <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
The guc_fini_hw registered calls __xe_uc_fw_status which is only
expected to be called after initializing fw state. Move this before
registering guc_fini_hw.
Signed-off-by: Matthew Brost <[email protected]>
Reviewed-by: Lucas De Marchi <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
ggtt->scratch is destroyed via devm, ggtt_fini sets ggtt->scratch to
NULL, ggtt->scratch in GGTT clears, so ensure ggtt->scratch is set NULL
before the BO is destroyed.
Signed-off-by: Matthew Brost <[email protected]>
Reviewed-by: Lucas De Marchi <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
The NVMe AER notification of a persistent internal error triggers a
reset. The existing warning message just says "due to AER", which can be
confused with the unrelated PCIe AER condition. Just say what the event
was instead of the generic overloaded acronym.
Reviewed-by: Christoph Hellwig <[email protected]>
Reviewed-by: Chaitanya Kulkarni <[email protected]>
Signed-off-by: Keith Busch <[email protected]>
|
|
This reverts commit 40520283e0fd11237ed9dfc0991503b3403d5fa4.
We can't install dma-fence-chain in timeline sync objs.
Signed-off-by: Matthew Brost <[email protected]>
Acked-by: Lucas De Marchi <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
The following calculation used in coalesced_mmio_has_room() to check
whether the ring buffer is full is wrong and results in premature exits if
the start of the valid entries is in the first half of the ring buffer.
avail = (ring->first - last - 1) % KVM_COALESCED_MMIO_MAX;
if (avail == 0)
/* full */
Because negative values are handled using two's complement, and KVM
computes the result as an unsigned value, the above will get a false
positive if "first < last" and the ring is half-full.
The above might have worked as expected in python for example:
>>> (-86) % 170
84
However it doesn't work the same way in C.
printf("avail: %d\n", (-86) % 170);
printf("avail: %u\n", (-86) % 170);
printf("avail: %u\n", (-86u) % 170u);
Using gcc-11 these print:
avail: -86
avail: 4294967210
avail: 0
For illustration purposes, given a 4-bit integer and a ring size of 0xA
(unsigned), 0xA == 0x1010 == -6, and thus (-6u % 0xA) == 0.
Fix the calculation and allow all but one entries in the buffer to be
used as originally intended.
Note, KVM's behavior is self-healing to some extent, as KVM will allow the
entire buffer to be used if ring->first is beyond the halfway point. In
other words, in the unlikely scenario that a use case benefits from being
able to coalesce more than 86 entries at once, KVM will still provide such
behavior, sometimes.
Note #2, the % operator in C is not the modulo operator but the remainder
operator. Modulo and remainder operators differ with respect to negative
values. But, the relevant values in KVM are all unsigned, so it's a moot
point in this case anyway.
Note #3, this is almost a pure revert of the buggy commit, plus a
READ_ONCE() to provide additional safety. Thue buggy commit justified the
change with "it paves the way for making this function lockless", but it's
not at all clear what was intended, nor is there any evidence that the
buggy code was somehow safer. (a) the fields in question were already
accessed locklessly, from the perspective that they could be modified by
userspace at any time, and (b) the lock guarding the ring itself was
changed, but never dropped, i.e. whatever lockless scheme (SRCU?) was
planned never landed.
Fixes: 105f8d40a737 ("KVM: Calculate available entries in coalesced mmio ring")
Signed-off-by: Ilias Stamatis <[email protected]>
Reviewed-by: Paul Durrant <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
[sean: rework changelog to clarify behavior, call out weirdness of buggy commit]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
The sparse tool complains as follows:
drivers/nvme/target/debugfs.c:16:15: warning:
symbol 'nvmet_debugfs' was not declared. Should it be static?
This symbol is not used outside debugfs.c, so marks it static.
Signed-off-by: Jinjie Ruan <[email protected]>
Reviewed-by: Chaitanya Kulkarni <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Keith Busch <[email protected]>
|
|
Prior to commit 3f29cc82a84c ("nfsd: split sc_status out of
sc_type") states_show() relied on sc_type field to be of valid
type before calling into a subfunction to show content of a
particular stateid. From that commit, we split the validity of
the stateid into sc_status and no longer changed sc_type to 0
while unhashing the stateid. This resulted in kernel oopsing
for nfsv4.0 opens that stay around and in nfs4_show_open()
would derefence sc_file which was NULL.
Instead, for closed open stateids forgo displaying information
that relies of having a valid sc_file.
To reproduce: mount the server with 4.0, read and close
a file and then on the server cat /proc/fs/nfsd/clients/2/states
[ 513.590804] Call trace:
[ 513.590925] _raw_spin_lock+0xcc/0x160
[ 513.591119] nfs4_show_open+0x78/0x2c0 [nfsd]
[ 513.591412] states_show+0x44c/0x488 [nfsd]
[ 513.591681] seq_read_iter+0x5d8/0x760
[ 513.591896] seq_read+0x188/0x208
[ 513.592075] vfs_read+0x148/0x470
[ 513.592241] ksys_read+0xcc/0x178
Fixes: 3f29cc82a84c ("nfsd: split sc_status out of sc_type")
Signed-off-by: Olga Kornievskaia <[email protected]>
Reviewed-by: Jeff Layton <[email protected]>
Signed-off-by: Chuck Lever <[email protected]>
|
|
Replace SET_LATE_SYSTEM_SLEEP_PM_OPS() with its modern
LATE_SYSTEM_SLEEP_PM_OPS() alternative.
The combined usage of pm_sleep_ptr() and LATE_SYSTEM_SLEEP_PM_OPS() allows
the compiler to evaluate if the runtime suspend/resume() functions
are used at build time or are simply dead code.
This allows removing the __maybe_unused notation from the runtime
suspend/resume() functions.
Signed-off-by: Fabio Estevam <[email protected]>
Reviewed-by: Peng Fan <[email protected]>
Link: https://lore.kernel.org/[email protected]
Signed-off-by: Linus Walleij <[email protected]>
|
|
register
A mistake was made in level trigger register configuration. Correct it.
Fixes: 447976ab62c5 ("pinctrl: starfive: Add StarFive JH7110 sys controller driver")
Signed-off-by: Hal Feng <[email protected]>
Link: https://lore.kernel.org/[email protected]
Signed-off-by: Linus Walleij <[email protected]>
|
|
Remove the erroneus 0x100000 offset to prevent the boards from crashing
on pin state setting, as well as for the intended state changes to take
effect.
Fixes: 05e4941d97ef ("pinctrl: qcom: Add X1E80100 pinctrl driver")
Signed-off-by: Konrad Dybcio <[email protected]>
Reviewed-by: Abel Vesa <[email protected]>
Reviewed-by: Bjorn Andersson <[email protected]>
Link: https://lore.kernel.org/[email protected]
Signed-off-by: Linus Walleij <[email protected]>
|
|
If a system is using preferred cores the highest perf will be inconsistent
as it can change from system events.
Skip the checks for it.
Fixes: e571a5e2068e ("cpufreq: amd-pstate: Update amd-pstate preferred core ranking dynamically")
Reviewed-by: Gautham R. Shenoy <[email protected]>
Signed-off-by: Mario Limonciello <[email protected]>
|
|
Despite its name, commit fed74d75277d ("pinctrl: mediatek: common-v2:
Fix bias-disable for PULL_PU_PD_RSEL_TYPE") actually broke bias-disable
for PULL_PU_PD_RSEL_TYPE.
mtk_pinconf_bias_set_combo() tries every bias method supported by the
pin until one succeeds. For PULL_PU_PD_RSEL_TYPE pins, before the
breaking commit, mtk_pinconf_bias_set_rsel() would be called first to
try and set the RSEL value (as well as PU and PD), and if that failed,
the only other valid option was that bias-disable was specified, which
would then be handled by calling mtk_pinconf_bias_set_pu_pd() and
disabling both PU and PD.
The breaking commit misunderstood this logic and added an early "return
0" in mtk_pinconf_bias_set_rsel(). The result was that in the
bias-disable case, the bias was left unchanged, since by returning
success, mtk_pinconf_bias_set_combo() no longer tried calling
mtk_pinconf_bias_set_pu_pd() to disable the bias.
Since the logic for configuring bias-disable on PULL_PU_PD_RSEL_TYPE
pins required mtk_pinconf_bias_set_rsel() to fail first, in that case,
an error was printed to the log, eg:
mt8195-pinctrl 10005000.pinctrl: Not support rsel value 0 Ohm for pin = 29 (GPIO29)
This is what the breaking commit actually got rid of, and likely part of
the reason why that commit was thought to be fixing functionality, while
in reality it was breaking it.
Instead of simply reverting that commit, restore the functionality but
in a way that avoids the error from being printed and makes the code
less confusing:
* Return 0 explicitly if a bias method was successful
* Introduce an extra function mtk_pinconf_bias_set_pu_pd_rsel() that
calls both mtk_pinconf_bias_set_rsel() (only if needed) and
mtk_pinconf_bias_set_pu_pd()
* And analogously for the corresponding getters
Fixes: fed74d75277d ("pinctrl: mediatek: common-v2: Fix bias-disable for PULL_PU_PD_RSEL_TYPE")
Signed-off-by: Nícolas F. R. A. Prado <[email protected]>
Link: https://lore.kernel.org/20240808-mtk-rsel-bias-disable-fix-v1-1-1b4e85bf596c@collabora.com
Signed-off-by: Linus Walleij <[email protected]>
|
|
pinmux_generic_get_function() can return NULL and the pointer 'function'
was dereferenced without checking against NULL. Add checking of pointer
'function' in pcs_get_function().
Found by code review.
Cc: [email protected]
Fixes: 571aec4df5b7 ("pinctrl: single: Use generic pinmux helpers for managing functions")
Signed-off-by: Ma Ke <[email protected]>
Link: https://lore.kernel.org/[email protected]
Signed-off-by: Linus Walleij <[email protected]>
|
|
The following structures are not modified in these drivers.
- struct meson_bank
- struct meson_pmx_bank
- struct meson_pmx_func
- struct meson_pmx_group
- struct meson_pinctrl_data
- struct meson_axg_pmx_data
Constifying these structures moves some data to a read-only section, so
increase overall security.
On a x86_64, with allmodconfig:
Before:
======
text data bss dec hex filename
10818 11696 0 22514 57f2 drivers/pinctrl/meson/pinctrl-amlogic-c3.o
17198 17680 0 34878 883e drivers/pinctrl/meson/pinctrl-amlogic-t7.o
14161 11200 0 25361 6311 drivers/pinctrl/meson/pinctrl-meson8b.o
17348 12512 0 29860 74a4 drivers/pinctrl/meson/pinctrl-meson8.o
3070 324 0 3394 d42 drivers/pinctrl/meson/pinctrl-meson8-pmx.o
9317 9648 0 18965 4a15 drivers/pinctrl/meson/pinctrl-meson-a1.o
12115 11664 0 23779 5ce3 drivers/pinctrl/meson/pinctrl-meson-axg.o
2470 120 0 2590 a1e drivers/pinctrl/meson/pinctrl-meson-axg-pmx.o
15125 15224 0 30349 768d drivers/pinctrl/meson/pinctrl-meson-g12a.o
13800 10160 0 23960 5d98 drivers/pinctrl/meson/pinctrl-meson-gxbb.o
13040 9648 0 22688 58a0 drivers/pinctrl/meson/pinctrl-meson-gxl.o
20507 1132 48 21687 54b7 drivers/pinctrl/meson/pinctrl-meson.o
12212 12880 0 25092 6204 drivers/pinctrl/meson/pinctrl-meson-s4.o
After:
=====
text data bss dec hex filename
22242 248 0 22490 57da drivers/pinctrl/meson/pinctrl-amlogic-c3.o
34638 248 0 34886 8846 drivers/pinctrl/meson/pinctrl-amlogic-t7.o
25137 232 0 25369 6319 drivers/pinctrl/meson/pinctrl-meson8b.o
29604 232 0 29836 748c drivers/pinctrl/meson/pinctrl-meson8.o
3070 324 0 3394 d42 drivers/pinctrl/meson/pinctrl-meson8-pmx.o
18725 248 0 18973 4a1d drivers/pinctrl/meson/pinctrl-meson-a1.o
23539 248 0 23787 5ceb drivers/pinctrl/meson/pinctrl-meson-axg.o
2470 120 0 2590 a1e drivers/pinctrl/meson/pinctrl-meson-axg-pmx.o
30101 256 0 30357 7695 drivers/pinctrl/meson/pinctrl-meson-g12a.o
23688 248 0 23936 5d80 drivers/pinctrl/meson/pinctrl-meson-gxbb.o
22416 248 0 22664 5888 drivers/pinctrl/meson/pinctrl-meson-gxl.o
20507 1132 48 21687 54b7 drivers/pinctrl/meson/pinctrl-meson.o
24820 248 0 25068 61ec drivers/pinctrl/meson/pinctrl-meson-s4.o
Signed-off-by: Christophe JAILLET <[email protected]>
Reviewed-by: Jerome Brunet <[email protected]>
Tested-by: Jerome Brunet <[email protected]>
Link: https://lore.kernel.org/f74e326bd7d48003c06219545bad7c2ef1a84bf8.1723053850.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Linus Walleij <[email protected]>
|
|
On qcom msm8998, writing to the last context bank of lpass_q6_smmu
(base address 0x05100000) produces a system freeze & reboot.
The hardware/hypervisor reports 13 context banks for the LPASS SMMU
on msm8998, but only the first 12 are accessible...
Override the number of context banks
[ 2.546101] arm-smmu 5100000.iommu: probing hardware configuration...
[ 2.552439] arm-smmu 5100000.iommu: SMMUv2 with:
[ 2.558945] arm-smmu 5100000.iommu: stage 1 translation
[ 2.563627] arm-smmu 5100000.iommu: address translation ops
[ 2.568923] arm-smmu 5100000.iommu: non-coherent table walk
[ 2.574566] arm-smmu 5100000.iommu: (IDR0.CTTW overridden by FW configuration)
[ 2.580220] arm-smmu 5100000.iommu: stream matching with 12 register groups
[ 2.587263] arm-smmu 5100000.iommu: 13 context banks (0 stage-2 only)
[ 2.614447] arm-smmu 5100000.iommu: Supported page sizes: 0x63315000
[ 2.621358] arm-smmu 5100000.iommu: Stage-1: 36-bit VA -> 36-bit IPA
[ 2.627772] arm-smmu 5100000.iommu: preserved 0 boot mappings
Specifically, the crashes occur here:
qsmmu->bypass_cbndx = smmu->num_context_banks - 1;
arm_smmu_cb_write(smmu, qsmmu->bypass_cbndx, ARM_SMMU_CB_SCTLR, 0);
and here:
arm_smmu_write_context_bank(smmu, i);
arm_smmu_cb_write(smmu, i, ARM_SMMU_CB_FSR, ARM_SMMU_CB_FSR_FAULT);
It is likely that FW reserves the last context bank for its own use,
thus a simple work-around is: DON'T USE IT in Linux.
If we decrease the number of context banks, last one will be "hidden".
Signed-off-by: Marc Gonzalez <[email protected]>
Reviewed-by: Caleb Connolly <[email protected]>
Reviewed-by: Bjorn Andersson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Will Deacon <[email protected]>
|
|
Ideally, we want to drop the legacy vblank enable for older ASICs. This
should be possible now, since we can now specify how many frames we need
to wait before disabling vblanking instead of being forced to either
choose between no delay (which can still be buggy) and
drm_vblank_offdelay (which is much longer by default than is required on
AMD hardware).
Suggested-by: Leo Li <[email protected]>
Reviewed-by: Harry Wentland <[email protected]>
Signed-off-by: Hamza Mahfooz <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Ideally, we want to enable immediate vblank disable, when possible and
we should be able to do so on DCN35+, if PSR isn't supported by a given
CRTC.
Suggested-by: Leo Li <[email protected]>
Reviewed-by: Harry Wentland <[email protected]>
Signed-off-by: Hamza Mahfooz <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Hook up drm_crtc_vblank_on_config() in amdgpu_dm. So, that we can enable
PSR and other static screen optimizations more quickly, while avoiding
stuttering issues that are accompanied by the following dmesg error:
[drm:dc_dmub_srv_wait_idle [amdgpu]] *ERROR* Error waiting for DMUB idle: status=3
This also allows us to mimic how vblanking is handled by the Windows
amdgpu driver. Specifically, we wait two idle frames before disabling
the vblank timer there.
Reviewed-by: Harry Wentland <[email protected]>
Signed-off-by: Hamza Mahfooz <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Add support for the 5 rk3576 GPIO banks.
Signed-off-by: Steven Liu <[email protected]>
Signed-off-by: Detlev Casanova <[email protected]>
Acked-by: Dragan Simic <[email protected]>
Reviewed-by: Heiko Stuebner <[email protected]>
Link: https://lore.kernel.org/[email protected]
Signed-off-by: Linus Walleij <[email protected]>
|
|
Add the compatible string for the rk3576 SoC.
Signed-off-by: Detlev Casanova <[email protected]>
Acked-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Heiko Stuebner <[email protected]>
Link: https://lore.kernel.org/[email protected]
Signed-off-by: Linus Walleij <[email protected]>
|
|
With the new __counted_by annotation, the "num_nodes" struct member must
be set before accessing the "nodes" array. This initialization was done
in other places where a new struct icc_onecell_data is allocated, but this
case in icc_clk_register() was missed. Set "num_nodes" after allocation.
Fixes: dd4904f3b924 ("interconnect: qcom: Annotate struct icc_onecell_data with __counted_by")
Signed-off-by: Kees Cook <[email protected]>
Reviewed-by: Gustavo A. R. Silva <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Georgi Djakov <[email protected]>
|
|
The sm8150 camnoc interconnect was mistakenly documented as
"qcom,sm8150-camnoc-noc", for which there is no reference to in
drivers or device tree.
Correct this to "qcom,sm8150-camnoc-virt".
Signed-off-by: Rayyan Ansari <[email protected]>
Acked-by: Dmitry Baryshkov <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Georgi Djakov <[email protected]>
|
|
Use of_property_read_bool() to read boolean properties rather than
of_find_property(). This is part of a larger effort to remove callers
of of_find_property() and similar functions. of_find_property() leaks
the DT struct property and data pointers which is a problem for
dynamically allocated nodes which may be freed.
Signed-off-by: Rob Herring (Arm) <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Link: https://lore.kernel.org/[email protected]
Signed-off-by: Linus Walleij <[email protected]>
|
|
pinctrl-at91 currently does not support the gpio-groups devicetree
property and has no pin-range.
Because of this at91 gpios stopped working since patch
commit 2ab73c6d8323fa1e ("gpio: Support GPIO controllers without pin-ranges")
This was discussed in the patches
commit fc328a7d1fcce263 ("gpio: Revert regression in sysfs-gpio (gpiolib.c)")
commit 56e337f2cf132632 ("Revert "gpio: Revert regression in sysfs-gpio (gpiolib.c)"")
As a workaround manually set pin-range via gpiochip_add_pin_range() until
a) pinctrl-at91 is reworked to support devicetree gpio-groups
b) another solution as mentioned in
commit 56e337f2cf132632 ("Revert "gpio: Revert regression in sysfs-gpio (gpiolib.c)"")
is found
Signed-off-by: Thomas Blocher <[email protected]>
Link: https://lore.kernel.org/[email protected]
Signed-off-by: Linus Walleij <[email protected]>
|
|
Update the vendor table with QCOM PCIe vendorid.
Signed-off-by: Krishna chaitanya chundru <[email protected]>
Reviewed-by: Yicong Yang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Will Deacon <[email protected]>
|
|
When the PCIe devices are discovered late, the driver can't find
the PCIe devices and returns in the init without registering with
the bus notifier. Due to that the devices which are discovered late
the driver can't register for this.
Register for bus notifier & driver even if the device is not found
as part of init.
Fixes: af9597adc2f1 ("drivers/perf: add DesignWare PCIe PMU driver")
Signed-off-by: Krishna chaitanya chundru <[email protected]>
Reviewed-by: Yicong Yang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Will Deacon <[email protected]>
|
|
Update document to reflect the driver change to use sbdf instead
of bdf alone.
Signed-off-by: Krishna chaitanya chundru <[email protected]>
Reviewed-by: Yicong Yang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Will Deacon <[email protected]>
|
|
When there are multiple of instances of PCIe controllers, registration
to perf driver fails with this error.
sysfs: cannot create duplicate filename '/devices/platform/dwc_pcie_pmu.0'
CPU: 0 PID: 166 Comm: modprobe Not tainted 6.10.0-rc2-next-20240607-dirty
Hardware name: Qualcomm SA8775P Ride (DT)
Call trace:
dump_backtrace.part.8+0x98/0xf0
show_stack+0x14/0x1c
dump_stack_lvl+0x74/0x88
dump_stack+0x14/0x1c
sysfs_warn_dup+0x60/0x78
sysfs_create_dir_ns+0xe8/0x100
kobject_add_internal+0x94/0x224
kobject_add+0xa8/0x118
device_add+0x298/0x7b4
platform_device_add+0x1a0/0x228
platform_device_register_full+0x11c/0x148
dwc_pcie_register_dev+0x74/0xf0 [dwc_pcie_pmu]
dwc_pcie_pmu_init+0x7c/0x1000 [dwc_pcie_pmu]
do_one_initcall+0x58/0x1c0
do_init_module+0x58/0x208
load_module+0x1804/0x188c
__do_sys_init_module+0x18c/0x1f0
__arm64_sys_init_module+0x14/0x1c
invoke_syscall+0x40/0xf8
el0_svc_common.constprop.1+0x70/0xf4
do_el0_svc+0x18/0x20
el0_svc+0x28/0xb0
el0t_64_sync_handler+0x9c/0xc0
el0t_64_sync+0x160/0x164
kobject: kobject_add_internal failed for dwc_pcie_pmu.0 with -EEXIST,
don't try to register things with the same name in the same directory.
This is because of having same bdf value for devices under two different
controllers.
Update the logic to use sbdf which is a unique number in case of
multi instance also.
Fixes: af9597adc2f1 ("drivers/perf: add DesignWare PCIe PMU driver")
Signed-off-by: Krishna chaitanya chundru <[email protected]>
Reviewed-by: Yicong Yang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Will Deacon <[email protected]>
|
|
The alibaba_uncore_pmu driver forgot to clear all interrupt status
in the interrupt processing function. After the PMU counter overflow
interrupt occurred, an interrupt storm occurred, causing the system
to hang.
Therefore, clear the correct interrupt status in the interrupt handling
function to fix it.
Fixes: cf7b61073e45 ("drivers/perf: add DDR Sub-System Driveway PMU driver for Yitian 710 SoC")
Signed-off-by: Jing Zhang <[email protected]>
Reviewed-by: Shuai Xue <[email protected]>
Acked-by: Mark Rutland <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Will Deacon <[email protected]>
|
|
This patch adds a new panic screen, with a QR code and the kmsg data
embedded.
If DRM_PANIC_SCREEN_QR_CODE_URL is set, then the kmsg data will be
compressed with zlib and encoded as a numerical segment, and appended
to the URL as a URL parameter. This allows to save space, and put
about ~7500 bytes of kmsg data, in a V40 QR code.
Linux distributions can customize the URL, and put a web frontend to
directly open a bug report with the kmsg data.
Otherwise the kmsg data will be encoded as a binary segment (ie raw
ascii) and only a maximum of 2953 bytes of kmsg data will be
available in the QR code.
You can also limit the QR code size with DRM_PANIC_SCREEN_QR_VERSION.
Signed-off-by: Jocelyn Falempe <[email protected]>
Reviewed-by: Alice Ryhl <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Drop unsupported features on smu v14_0_2.
Signed-off-by: Candice Li <[email protected]>
Reviewed-by: Yang Wang <[email protected]>
Acked-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
When app unmap vm ranges(munmap) kfd/svm starts drain pending page fault and
not handle any incoming pages fault of this process until a deferred work item
got executed by default system wq. The time period of "not handle page fault"
can be long and is unpredicable. That is advese to kfd performance on page
faults recovery.
This patch uses time stamp of incoming page fault to decide to drop or recover
page fault. When app unmap vm ranges kfd records each gpu device's ih ring
current time stamp. These time stamps are used at kfd page fault recovery
routine.
Any page fault happened on unmapped ranges after unmap events is application
bug that accesses vm range after unmap. It is not driver work to cover that.
By using time stamp of page fault do not need drain page faults at deferred
work. So, the time period that kfd does not handle page faults is reduced
and can be controlled.
Signed-off-by: Xiaogang.Chen <[email protected]>
Reviewed-by: Philip Yang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Add p2s table support for a new revision of SMUv13.0.6.
Signed-off-by: Lijo Lazar <[email protected]>
Reviewed-by: Hawking Zhang <[email protected]>
Reviewed-by: Asad Kamal <[email protected]>
Acked-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Add gc_info table v1.3 for IP discovery.
Signed-off-by: Likun Gao <[email protected]>
Reviewed-by: Hawking Zhang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Instead of using state->fb->obj[0] directly, get object from framebuffer
by calling drm_gem_fb_get_obj() and return error code when object is
null to avoid using null object of framebuffer.
Fixes: 5d945cbcd4b1 ("drm/amd/display: Create a file dedicated to planes")
Signed-off-by: Ma Ke <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|