| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
controller
The pinctrl subnodes that define the pin configuration of other devices
under PIO3 pinmux controller are not simple memory mapped nodes.Ergo,
change simple-bus to simple-mfd.
Signed-off-by: Manikandan Muralidharan <[email protected]>
Acked-by: Linus Walleij <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Claudiu Beznea <[email protected]>
|
|
rebalance_work was keying off of the presence of rebelance_opts in the
extent - but that was incorrect, we keep those around after rebalance
for indirect extents since the inode's options are not directly
available
Fixes: 20ac515a9cc7 ("bcachefs: bch_acct_rebalance_work")
Signed-off-by: Kent Overstreet <[email protected]>
|
|
This fixes an apparent deadlock - rebalance would get stuck trying to
take nocow locks because they weren't being released by copygc.
Signed-off-by: Kent Overstreet <[email protected]>
|
|
When a folio that is marked for streaming write (dirty, but not uptodate,
with partial content specified in the private data) is written back, the
folio is effectively switched to the blank state upon completion of the
write. This means that if we want to read it in future, we need to reread
the whole folio.
However, if the folio is above the zero_point position, when it is read
back, it will just be cleared and the read skipped, leading to apparent
local corruption.
Fix this by increasing the zero_point to the end of the dirty data in the
folio when clearing the folio state after writeback. This is analogous to
the folio having ->release_folio() called upon it.
This was causing the config.log generated by configuring a cpython tree on
a cifs share to get corrupted because the scripts involved were appending
text to the file in small pieces.
Fixes: 288ace2f57c9 ("netfs: New writeback implementation")
Signed-off-by: David Howells <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
cc: Steve French <[email protected]>
cc: Paulo Alcantara <[email protected]>
cc: Jeff Layton <[email protected]>
cc: [email protected]
cc: [email protected]
cc: [email protected]
Signed-off-by: Christian Brauner <[email protected]>
|
|
Fix netfs_rreq_perform_resubmissions() to reset before retrying a short
read, otherwise the wrong part of the output buffer will be used.
Fixes: 92b6cc5d1e7c ("netfs: Add iov_iters to (sub)requests to describe various buffers")
Signed-off-by: David Howells <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
cc: Steve French <[email protected]>
cc: Paulo Alcantara <[email protected]>
cc: Jeff Layton <[email protected]>
cc: [email protected]
cc: [email protected]
cc: [email protected]
Signed-off-by: Christian Brauner <[email protected]>
|
|
When netfslib writes to a folio that it doesn't have data for, but that
data exists on the server, it will make a 'streaming write' whereby it
stores data in a folio that is marked dirty, but not uptodate. When it
does this, it attaches a record to folio->private to track the dirty
region.
When truncate() or fallocate() wants to invalidate part of such a folio, it
will call into ->invalidate_folio(), specifying the part of the folio that
is to be invalidated. netfs_invalidate_folio(), on behalf of the
filesystem, must then determine how to trim the streaming write record. In
a couple of cases, however, it does this incorrectly (the reduce-length and
move-start cases are switched over and don't, in any case, calculate the
value correctly).
Fix this by making the logic tree more obvious and fixing the cases.
Fixes: 9ebff83e6481 ("netfs: Prep to use folio->private for write grouping and streaming write")
Signed-off-by: David Howells <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
cc: Matthew Wilcox (Oracle) <[email protected]>
cc: Pankaj Raghav <[email protected]>
cc: Jeff Layton <[email protected]>
cc: Marc Dionne <[email protected]>
cc: [email protected]
cc: [email protected]
cc: [email protected]
cc: [email protected]
Signed-off-by: Christian Brauner <[email protected]>
|
|
Fix netfs_release_folio() to say no (ie. return false) if the folio is
dirty (analogous with iomap's behaviour). Without this, it will say yes to
the release of a dirty page by split_huge_page_to_list_to_order(), which
will result in the loss of untruncated data in the folio.
Without this, the generic/075 and generic/112 xfstests (both fsx-based
tests) fail with minimum folio size patches applied[1].
Fixes: c1ec4d7c2e13 ("netfs: Provide invalidate_folio and release_folio calls")
Signed-off-by: David Howells <[email protected]>
Link: https://lore.kernel.org/r/[email protected]/ [1]
Link: https://lore.kernel.org/r/[email protected]
cc: Matthew Wilcox (Oracle) <[email protected]>
cc: Pankaj Raghav <[email protected]>
cc: Jeff Layton <[email protected]>
cc: Marc Dionne <[email protected]>
cc: [email protected]
cc: [email protected]
cc: [email protected]
cc: [email protected]
Signed-off-by: Christian Brauner <[email protected]>
|
|
At the end of an kAFS RPC operation, there is an "edit" phase (originally
intended for post-directory modification ops to edit the local image) that
the setattr VFS op uses to fix up the pagecache if the RPC that requested
truncation of a file was successful.
afs_setattr_edit_file() calls truncate_setsize() which sets i_size, expands
the pagecache if needed and truncates the pagecache. The first two of
those, however, are redundant as they've already been done by
afs_setattr_success() under the io_lock and the first is also done under
the callback lock (cb_lock).
Fix afs_setattr_edit_file() to call truncate_pagecache() instead (which is
called by truncate_setsize(), thereby skipping the redundant parts.
Fixes: 100ccd18bb41 ("netfs: Optimise away reads above the point at which there can be no data")
Signed-off-by: David Howells <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
cc: Matthew Wilcox (Oracle) <[email protected]>
cc: Pankaj Raghav <[email protected]>
cc: Jeff Layton <[email protected]>
cc: Marc Dionne <[email protected]>
cc: [email protected]
cc: [email protected]
cc: [email protected]
cc: [email protected]
Signed-off-by: Christian Brauner <[email protected]>
|
|
When AS_RELEASE_ALWAYS is set on a mapping, the ->release_folio() and
->invalidate_folio() calls should be invoked even if PG_private and
PG_private_2 aren't set. This is used by netfslib to keep track of the
point above which reads can be skipped in favour of just zeroing pagecache
locally.
There are a couple of places in truncation in which invalidation is only
called when folio_has_private() is true. Fix these to check
folio_needs_release() instead.
Without this, the generic/075 and generic/112 xfstests (both fsx-based
tests) fail with minimum folio size patches applied[1].
Fixes: b4fa966f03b7 ("mm, netfs, fscache: stop read optimisation when folio removed from pagecache")
Signed-off-by: David Howells <[email protected]>
Link: https://lore.kernel.org/r/[email protected]/ [1]
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Matthew Wilcox (Oracle) <[email protected]>
cc: Matthew Wilcox (Oracle) <[email protected]>
cc: Pankaj Raghav <[email protected]>
cc: Jeff Layton <[email protected]>
cc: Marc Dionne <[email protected]>
cc: [email protected]
cc: [email protected]
cc: [email protected]
cc: [email protected]
Signed-off-by: Christian Brauner <[email protected]>
|
|
Simplify and fix overlayfs layer parsing so the maximum of 500 layers
can be used.
* patches from https://lore.kernel.org/r/[email protected]:
ovl: ovl_parse_param_lowerdir: Add missed '\n' for pr_err
ovl: fix wrong lowerdir number check for parameter Opt_lowerdir
ovl: pass string to ovl_parse_layer()
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Christian Brauner <[email protected]>
|
|
Algorithm registration is usually carried out during module init,
where as little work as possible should be carried out. The SIMD
code violated this rule by allocating a tfm, this then triggers a
full test of the algorithm which may dead-lock in certain cases.
SIMD is only allocating the tfm to get at the alg object, which is
in fact already available as it is what we are registering. Use
that directly and remove the crypto_alloc_tfm call.
Also remove some obsolete and unused SIMD API.
Signed-off-by: Herbert Xu <[email protected]>
|
|
As registration is usually carried out during module init, this
is a context where as little work as possible should be carried
out. Testing may trigger module loads of underlying components,
which could even lead back to the module that is registering at
the moment. This may lead to dead-locks outside of the Crypto API.
Avoid this by not waiting for the tests to complete. They will
be scheduled but completion will be asynchronous. Any users will
still wait for completion.
Reported-by: Russell King <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
|
|
In order to allow testing to complete asynchronously after the
registration process, instance larvals need to complete prior
to having a test result. Support this by redoing the lookup for
instance larvals after completion. This should locate the pending
test larval and then repeat the wait on that (if it is still pending).
As the lookup is now repeated there is no longer any need to compute
the fulfilment status and all that code can be removed.
Signed-off-by: Herbert Xu <[email protected]>
|
|
Use the generic crypto_authenc_extractkeys helper instead of custom
parsing code that is slightly broken. Also fix a number of memory
leaks by moving memory allocation from setkey to init_tfm (setkey
can be called multiple times over the life of a tfm).
Finally accept all hash key lengths by running the digest over
extra-long keys.
Signed-off-by: Herbert Xu <[email protected]>
|
|
Use the generic crypto_authenc_extractkeys helper instead of custom
parsing code that is slightly broken. Also fix a number of memory
leaks by moving memory allocation from setkey to init_tfm (setkey
can be called multiple times over the life of a tfm).
Finally accept all hash key lengths by running the digest over
extra-long keys.
Signed-off-by: Herbert Xu <[email protected]>
|
|
Removed CRYPTO_USED_JB and returning CRYPTO_OK instead.
Signed-off-by: Bhoomika K <[email protected]>
Signed-off-by: Pavitrakumar M <[email protected]>
Acked-by: Ruud Derwig <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
|
|
This patch fixes counter width checks according to the version extension3
register. The counter widths can be 8, 16, 32 and 64 bits as per the
extension3 register.
Signed-off-by: Bhoomika K <[email protected]>
Signed-off-by: Pavitrakumar M <[email protected]>
Acked-by: Ruud Derwig <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
|
|
The macro `ADF_RP_INT_SRC_SEL_F_RISE_MASK` is currently set to the value
`0100b` which means "Empty Going False". This might cause an incorrect
restore of the bank state during live migration.
Fix the definition of the macro to properly represent the "Full Going
True" state which is encoded as `0011b`.
Fixes: bbfdde7d195f ("crypto: qat - add bank save and restore flows")
Signed-off-by: Svyatoslav Pankratov <[email protected]>
Reviewed-by: Xin Zeng <[email protected]>
Signed-off-by: Giovanni Cabiddu <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
|
|
Check for crypto_alloc_skcipher() failure.
Fixes: c8981d9230d8 ("crypto: spacc - Add SPAcc Skcipher support")
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
|
|
The crypto_alloc_aead() function doesn't return NULL pointers, it returns
error pointers. Fix the error checking.
Fixes: 06af76b46c78 ("crypto: spacc - Add SPAcc aead support")
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
|
|
Smatch complains that:
drivers/crypto/dwc-spacc/spacc_aead.c:1031 spacc_aead_process()
error: uninitialized symbol 'ptaadsize'.
This could happen if, for example, tctx->mode was CRYPTO_MODE_NULL and
req->cryptlen was less than icvremove.
Fixes: 06af76b46c78 ("crypto: spacc - Add SPAcc aead support")
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
|
|
Use the crypto_authenc_extractkeys helper rather than ad-hoc parsing.
Signed-off-by: Herbert Xu <[email protected]>
|
|
Put the break statement should be on its own line.
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
|
|
The spacc->config.modes[] array has CRYPTO_MODE_LAST number of elements
so this > comparison should be >= to prevent an out of bounds access.
Fixes: c8981d9230d8 ("crypto: spacc - Add SPAcc Skcipher support")
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
|
|
This bounds checking is off by one. The > should be >=. The
spacc->job[] array is allocated in spacc_init() and it has
SPACC_MAX_JOBS elements.
Fixes: 8ebb14deef0f ("crypto: spacc - Enable SPAcc AUTODETECT")
Fixes: c8981d9230d8 ("crypto: spacc - Add SPAcc Skcipher support")
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
|
|
Print additional information, in the form of the old and new versions of
the SEV firmware, so that it can be seen what the base firmware was before
the upgrade.
Signed-off-by: Tom Lendacky <[email protected]>
Reviewed-by: Ashish Kalra <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
|
|
The macros FOUR_ROUNDS_AND_SCHED and DO_4ROUNDS rely on an
unexpected/undocumented behavior of the GNU assembler, which might
change in the future
(https://sourceware.org/bugzilla/show_bug.cgi?id=32073).
M (1) (2) // 1 arg !? Future: 2 args
M 1 + 2 // 1 arg !? Future: 3 args
M 1 2 // 2 args
Add parentheses around the single arguments to support future GNU
assembler and LLVM integrated assembler (when the IsOperator hack from
the following link is dropped).
Link: https://github.com/llvm/llvm-project/commit/055006475e22014b28a070db1bff41ca15f322f0
Signed-off-by: Fangrui Song <[email protected]>
Reviewed-by: Jan Beulich <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
|
|
Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded
based on the alias from of_device_id table.
Signed-off-by: Liao Chen <[email protected]>
Acked-by: Daniele Alessandrelli <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
|
|
The user space Jitter RNG library uses the oversampling rate of 3 which
implies that each time stamp is credited with 1/3 bit of entropy. To
obtain 256 bits of entropy, 768 time stamps need to be sampled. The
increase in OSR is applied based on a report where the Jitter RNG is
used on a system exhibiting a challenging environment to collect
entropy.
This OSR default value is now applied to the Linux kernel version of
the Jitter RNG as well.
The increase in the OSR from 1 to 3 also implies that the Jitter RNG is
now slower by default.
Reported-by: Jeff Barnes <[email protected]>
Signed-off-by: Stephan Mueller <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
|
|
Clang warns (or errors with CONFIG_DRM_WERROR or CONFIG_WERROR):
drivers/gpu/drm/xe/xe_ggtt.c:810:3: error: variable 'total' is uninitialized when used here [-Werror,-Wuninitialized]
810 | total += hole_size;
| ^~~~~
drivers/gpu/drm/xe/xe_ggtt.c:798:11: note: initialize the variable 'total' to silence this warning
798 | u64 total;
| ^
| = 0
1 error generated.
Move the zero initialization of total from
xe_gt_sriov_pf_config_print_available_ggtt() to xe_ggtt_print_holes() to
resolve the warning.
Fixes: 136367290ea5 ("drm/xe: Introduce xe_ggtt_print_holes")
Signed-off-by: Nathan Chancellor <[email protected]>
Reviewed-by: Lucas De Marchi <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/20240823-drm-xe-fix-total-in-xe_ggtt_print_holes-v1-1-12b02d079327@kernel.org
Signed-off-by: Lucas De Marchi <[email protected]>
|
|
In commit # 0a3e4e94d137 ("platform/x86/intel/ifs: Add SBAF test image
loading support"), the documentation for "Structural Based Functional
Test at Field (SBAF)" had an incomplete underline. This resulted in the
following build warning:
Documentation/arch/x86/ifs:2: drivers/platform/x86/intel/ifs/ifs.h:131: WARNING: Title underline too short.
Fix it by extending the dotted lines to match the length of the title.
Fixes: 0a3e4e94d137 ("platform/x86/intel/ifs: Add SBAF test image loading support")
Reported-by: Stephen Rothwell <[email protected]>
Closes: https://lore.kernel.org/lkml/[email protected]/T/#u
Signed-off-by: Kuppuswamy Sathyanarayanan <[email protected]>
Reviewed-by: Jithu Joseph <[email protected]>
Link: https://lore.kernel.org/r/20240823184337.2923179-1-sathyanarayanan.kuppuswamy@linux.intel.com
Signed-off-by: Hans de Goede <[email protected]>
|
|
There are 2G and 4G RAM versions of the Lenovo Yoga Tab 3 X90F and it
turns out that the 2G version has a DMI product name of
"CHERRYVIEW D1 PLATFORM" where as the 4G version has
"CHERRYVIEW C0 PLATFORM". The sys-vendor + product-version check are
unique enough that the product-name check is not necessary.
Drop the product-name check so that the existing DMI match for the 4G
RAM version also matches the 2G RAM version.
Fixes: f6f4a0862bde ("drm/i915/vlv_dsi: Add DMI quirk for backlight control issues on Lenovo Yoga Tab 3 (v2)")
Cc: [email protected]
Acked-by: Jani Nikula <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
No consumers anymore, remove it. After this, insertion of policies
no longer require list walk of all inexact policies but only those
that are reachable via the candidate sets.
This gives almost linear insertion speeds provided the inserted
policies are for non-overlapping networks.
Before:
Inserted 1000 policies in 70 ms
Inserted 10000 policies in 1155 ms
Inserted 100000 policies in 216848 ms
After:
Inserted 1000 policies in 56 ms
Inserted 10000 policies in 478 ms
Inserted 100000 policies in 4580 ms
Insertion of 1m entries takes about ~40s after this change
on my test vm.
Cc: Noel Kuntze <[email protected]>
Cc: Tobias Brunner <[email protected]>
Signed-off-by: Florian Westphal <[email protected]>
Signed-off-by: Steffen Klassert <[email protected]>
|
|
XFRM_MIGRATE still uses the old lookup method:
first check the bydst hash table, then search the list of all the other
policies.
Switch MIGRATE to use the same lookup function as the packetpath.
This is done to remove the last remaining users of the pernet
xfrm.policy_inexact lists with the intent of removing this list.
After this patch, policies are still added to the list on insertion
and they are rehashed as-needed but no single API makes use of these
anymore.
This change is compile tested only.
Cc: Tobias Brunner <[email protected]>
Signed-off-by: Florian Westphal <[email protected]>
Signed-off-by: Steffen Klassert <[email protected]>
|
|
Since commit
6be3b0db6db8 ("xfrm: policy: add inexact policy search tree infrastructure")
policy lookup no longer walks a list but has a set of candidate lists.
This set has to be searched for the best match.
In case there are several matches, the priority wins.
If the priority is also the same, then the historic behaviour with
a single list was to return the first match (first-in-list).
With introduction of serval lists, this doesn't work and a new
'pos' member was added that reflects the xfrm_policy structs position
in the list.
This value is not exported to userspace and it does not need to be
the 'position in the list', it just needs to make sure that
a->pos < b->pos means that a was added to the lists more recently
than b.
This re-walk is expensive when many inexact policies are in use.
Speed this up: when appending the policy to the end of the walker list,
then just take the ->pos value of the last entry made and add 1.
Add a slowpath version to prevent overflow, if we'd assign UINT_MAX
then iterate the entire list and fix the ordering.
While this speeds up insertion considerably finding the insertion spot
in the inexact list still requires a partial list walk.
This is addressed in followup patches.
Before:
./xfrm_policy_add_speed.sh
Inserted 1000 policies in 72 ms
Inserted 10000 policies in 1540 ms
Inserted 100000 policies in 334780 ms
After:
Inserted 1000 policies in 68 ms
Inserted 10000 policies in 1137 ms
Inserted 100000 policies in 157307 ms
Reported-by: Noel Kuntze <[email protected]>
Cc: Tobias Brunner <[email protected]>
Signed-off-by: Florian Westphal <[email protected]>
Signed-off-by: Steffen Klassert <[email protected]>
|
|
Nothing special, just test how long insertion of x policies takes.
This should ideally show linear insertion speeds.
Do not run this by default, it has little value, but it can be useful to
check for insertion speed chahnges when altering the xfrm policy db
implementation.
Signed-off-by: Florian Westphal <[email protected]>
Signed-off-by: Steffen Klassert <[email protected]>
|
|
Limit amount of data that can be written into an evdev instance at
a given time to 4096 bytes (170 input events) to avoid holding
evdev->mutex for too long and starving other users.
Reviewed-by: Jeff LaBundy <[email protected]>
Reviewed-by: Peter Hutterer <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dmitry Torokhov <[email protected]>
|
|
Since the commit 5f1a6826ea49 ("staging: rtl8192e: remove set but
otherwise unused local variable iv32"), the local variable iv16 is set
but otherwise unused. So remove it.
Compile tested only.
Reported-by: kernel test robot <[email protected]>
Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/
Signed-off-by: Simon Horman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fixes from Tejun Heo:
"Three patches addressing cpuset corner cases"
* tag 'cgroup-for-6.11-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup/cpuset: Eliminate unncessary sched domains rebuilds in hotplug
cgroup/cpuset: Clear effective_xcpus on cpus_allowed clearing only if cpus.exclusive not set
cgroup/cpuset: fix panic caused by partcmd_update
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
Pull workqueue fixes from Tejun Heo:
"Nothing too interesting. One patch to remove spurious warning and
others to address static checker warnings"
* tag 'wq-for-6.11-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: Correct declaration of cpu_pwq in struct workqueue_struct
workqueue: Fix spruious data race in __flush_work()
workqueue: Remove incorrect "WARN_ON_ONCE(!list_empty(&worker->entry));" from dying worker
workqueue: Fix UBSAN 'subtraction overflow' error in shift_and_mask()
workqueue: doc: Fix function name, remove markers
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fixes from Thomas Bogendoerfer:
- Set correct timer mode on Loongson64
- Only request r4k clockevent interrupt on one CPU
* tag 'mips-fixes_6.11_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: cevt-r4k: Don't call get_c0_compare_int if timer irq is installed
MIPS: Loongson64: Set timer mode in cpu-probe
|
|
Stop Endpoint command on LINK TRB with TC bit set to 1 causes that
internal cycle bit can have incorrect state after command complete.
In consequence empty transfer ring can be incorrectly detected
when EP is resumed.
NOP TRB before LINK TRB avoid such scenario. Stop Endpoint command
is then on NOP TRB and internal cycle bit is not changed and have
correct value.
Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver")
cc: <[email protected]>
Signed-off-by: Pawel Laszczak <[email protected]>
Reviewed-by: Peter Chen <[email protected]>
Link: https://lore.kernel.org/r/PH7PR07MB953878279F375CCCE6C6F40FDD8E2@PH7PR07MB9538.namprd07.prod.outlook.com
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 kvm fixes from Catalin Marinas:
- Don't drop references on LPIs that weren't visited by the vgic-debug
iterator
- Cure lock ordering issue when unregistering vgic redistributors
- Fix for misaligned stage-2 mappings when VMs are backed by hugetlb
pages
- Treat SGI registers as UNDEFINED if a VM hasn't been configured for
GICv3
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
KVM: arm64: Make ICC_*SGI*_EL1 undef in the absence of a vGICv3
KVM: arm64: Ensure canonical IPA is hugepage-aligned when handling fault
KVM: arm64: vgic: Don't hold config_lock while unregistering redistributors
KVM: arm64: vgic-debug: Don't put unmarked LPIs
|
|
Pull NFS client fixes from Anna Schumaker:
- Fix rpcrdma refcounting in xa_alloc
- Fix rpcrdma usage of XA_FLAGS_ALLOC
- Fix requesting FATTR4_WORD2_OPEN_ARGUMENTS
- Fix attribute bitmap decoder to handle a 3rd word
- Add reschedule points when returning delegations to avoid soft lockups
- Fix clearing layout segments in layoutreturn
- Avoid unnecessary rescanning of the per-server delegation list
* tag 'nfs-for-6.11-2' of git://git.linux-nfs.org/projects/anna/linux-nfs:
NFS: Avoid unnecessary rescanning of the per-server delegation list
NFSv4: Fix clearing of layout segments in layoutreturn
NFSv4: Add missing rescheduling points in nfs_client_return_marked_delegations
nfs: fix bitmap decoder to handle a 3rd word
nfs: fix the fetch of FATTR4_OPEN_ARGUMENTS
rpcrdma: Trace connection registration and unregistration
rpcrdma: Use XA_FLAGS_ALLOC instead of XA_FLAGS_ALLOC1
rpcrdma: Device kref is over-incremented on error from xa_alloc
|
|
Merge series from Vijendar Mukunda <[email protected]>:
This patch series adds SOF support for ACP7.0 based platform.
Link: https://github.com/thesofproject/linux/pull/5139
|
|
Merge series from Luca Ceresoli <[email protected]>:
This small series adds some improvements to dapm-graph in order to produce
a more correct and informative graph.
|
|
Pull smb client fixes from Steve French:
- fix refcount leak (can cause rmmod fail)
- fix byte range locking problem with cached reads
- fix for mount failure if reparse point unrecognized
- minor typo
* tag 'v6.11-rc4-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb/client: fix typo: GlobalMid_Sem -> GlobalMid_Lock
smb: client: ignore unhandled reparse tags
smb3: fix problem unloading module due to leaked refcount on shutdown
smb3: fix broken cached reads when posix locks
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- a tweak to uinput interface to reject requests with abnormally large
number of slots. 100 slots/contacts should be enough for real devices
- support for FocalTech FT8201 added to the edt-ft5x06 driver
- tweaks to i8042 to handle more devices that have issue with its
emulation
- Synaptics touchpad switched to native SMbus/RMI mode on HP Elitebook
840 G2
- other minor fixes
* tag 'input-for-v6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: himax_hx83112b - fix incorrect size when reading product ID
Input: i8042 - use new forcenorestore quirk to replace old buggy quirk combination
Input: i8042 - add forcenorestore quirk to leave controller untouched even on s3
Input: i8042 - add Fujitsu Lifebook E756 to i8042 quirk table
Input: uinput - reject requests with unreasonable number of slots
Input: edt-ft5x06 - add support for FocalTech FT8201
dt-bindings: input: touchscreen: edt-ft5x06: Document FT8201 support
Input: adc-joystick - fix optional value handling
Input: synaptics - enable SMBus for HP Elitebook 840 G2
Input: ads7846 - ratelimit the spi_sync error message
|
|
Pull drm fixes from Dave Airlie:
"Weekly fixes. xe and msm are the major groups, with
amdgpu/i915/nouveau having smaller bits. xe has a bunch of hw
workaround fixes that were found to be missing, so that is why there
are a bunch of scattered fixes, and one larger one. But overall size
doesn't look too out of the ordinary.
msm:
- virtual plane fixes:
- drop yuv on hw where not supported
- csc vs yuv format fix
- rotation fix
- fix fb cleanup on close
- reset phy before link training
- fix visual corruption at 4K
- fix NULL ptr crash on hotplug
- simplify debug macros
- sc7180 fix
- adreno firmware name error path fix
amdgpu:
- GFX10 firmware loading fix
- SDMA 5.2 fix
- Debugfs parameter validation fix
- eGPU hotplug fix
i915:
- fix HDCP timeouts
nouveau:
- fix SG_DEBUG crash
xe:
- Fix OA format masks which were breaking build with gcc-5
- Fix opregion leak (Lucas)
- Fix OA sysfs entry (Ashutosh)
- Fix VM dma-resv lock (Brost)
- Fix tile fini sequence (Brost)
- Prevent UAF around preempt fence (Auld)
- Fix DGFX display suspend/resume (Maarten)
- Many Xe/Xe2 critical workarounds (Auld, Ngai-Mint, Bommu, Tejas, Daniele)
- Fix devm/drmm issues (Daniele)
- Fix missing workqueue destroy in xe_gt_pagefault (Stuart)
- Drop HW fence pointer to HW fence ctx (Brost)
- Free job before xe_exec_queue_put (Brost)"
* tag 'drm-fixes-2024-08-24' of https://gitlab.freedesktop.org/drm/kernel: (35 commits)
drm/xe: Free job before xe_exec_queue_put
drm/xe: Drop HW fence pointer to HW fence ctx
drm/xe: Fix missing workqueue destroy in xe_gt_pagefault
drm/amdgpu: fix eGPU hotplug regression
drm/amdgpu: Validate TA binary size
drm/amdgpu/sdma5.2: limit wptr workaround to sdma 5.2.1
drm/amdgpu: fixing rlc firmware loading failure issue
drm/xe/uc: Use devm to register cleanup that includes exec_queues
drm/xe: use devm instead of drmm for managed bo
drm/xe/xe2hpg: Add Wa_14021821874
drm/xe: fix WA 14018094691
drm/xe/xe2: Add Wa_15015404425
drm/xe/xe2: Make subsequent L2 flush sequential
drm/xe/xe2lpg: Extend workaround 14021402888
drm/xe/xe2lpm: Extend Wa_16021639441
drm/xe/bmg: implement Wa_16023588340
drm/xe/oa/uapi: Make bit masks unsigned
drm/xe/display: Make display suspend/resume work on discrete
drm/xe: prevent UAF around preempt fence
drm/xe: Fix tile fini sequence
...
|
|
"See also" in description seems to be wrongly defined,
make it inline with other yamls.
Fixes: 791ed23f735b ("dt-bindings: interconnect: qcom: Add Qualcomm MSM8953 NoC")
Signed-off-by: Adam Skladowski <[email protected]>
Acked-by: Rob Herring (Arm) <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Georgi Djakov <[email protected]>
|