Age | Commit message (Collapse) | Author | Files | Lines |
|
Pull virtio fix from Michael Tsirkin:
"A last minute mlx5 bugfix"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vdpa/mlx5: Fix PA offset with unaligned starting iotlb map
|
|
This commit fixes the bug in the handling of partial mapping of the
buffer objects to the GPU, which caused kernel warnings.
Panthor didn't correctly handle the case where the partial mapping
spanned multiple scatterlists and the mapping offset didn't point
to the 1st page of starting scatterlist. The offset variable was
not cleared after reaching the starting scatterlist.
Following warning messages were seen.
WARNING: CPU: 1 PID: 650 at drivers/iommu/io-pgtable-arm.c:659 __arm_lpae_unmap+0x254/0x5a0
<snip>
pc : __arm_lpae_unmap+0x254/0x5a0
lr : __arm_lpae_unmap+0x2cc/0x5a0
<snip>
Call trace:
__arm_lpae_unmap+0x254/0x5a0
__arm_lpae_unmap+0x108/0x5a0
__arm_lpae_unmap+0x108/0x5a0
__arm_lpae_unmap+0x108/0x5a0
arm_lpae_unmap_pages+0x80/0xa0
panthor_vm_unmap_pages+0xac/0x1c8 [panthor]
panthor_gpuva_sm_step_unmap+0x4c/0xc8 [panthor]
op_unmap_cb.isra.23.constprop.30+0x54/0x80
__drm_gpuvm_sm_unmap+0x184/0x1c8
drm_gpuvm_sm_unmap+0x40/0x60
panthor_vm_exec_op+0xa8/0x120 [panthor]
panthor_vm_bind_exec_sync_op+0xc4/0xe8 [panthor]
panthor_ioctl_vm_bind+0x10c/0x170 [panthor]
drm_ioctl_kernel+0xbc/0x138
drm_ioctl+0x210/0x4b0
__arm64_sys_ioctl+0xb0/0xf8
invoke_syscall+0x4c/0x110
el0_svc_common.constprop.1+0x98/0xf8
do_el0_svc+0x24/0x38
el0_svc+0x34/0xc8
el0t_64_sync_handler+0xa0/0xc8
el0t_64_sync+0x174/0x178
<snip>
panthor : [drm] drm_WARN_ON(unmapped_sz != pgsize * pgcount)
WARNING: CPU: 1 PID: 650 at drivers/gpu/drm/panthor/panthor_mmu.c:922 panthor_vm_unmap_pages+0x124/0x1c8 [panthor]
<snip>
pc : panthor_vm_unmap_pages+0x124/0x1c8 [panthor]
lr : panthor_vm_unmap_pages+0x124/0x1c8 [panthor]
<snip>
panthor : [drm] *ERROR* failed to unmap range ffffa388f000-ffffa3890000 (requested range ffffa388c000-ffffa3890000)
Fixes: 647810ec2476 ("drm/panthor: Add the MMU/VM logical block")
Signed-off-by: Akash Goel <[email protected]>
Reviewed-by: Liviu Dudau <[email protected]>
Reviewed-by: Steven Price <[email protected]>
Reviewed-by: Boris Brezillon <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Liviu Dudau <[email protected]>
|
|
syzbot and Daan report a NULL pointer crash in the new full swap cluster
reclaim work:
> Oops: general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN PTI
> KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
> CPU: 1 UID: 0 PID: 51 Comm: kworker/1:1 Not tainted 6.12.0-rc6-syzkaller #0
> Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
> Workqueue: events swap_reclaim_work
> RIP: 0010:__list_del_entry_valid_or_report+0x20/0x1c0 lib/list_debug.c:49
> Code: 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 48 89 fe 48 83 c7 08 48 83 ec 18 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 19 01 00 00 48 89 f2 48 8b 4e 08 48 b8 00 00 00
> RSP: 0018:ffffc90000bb7c30 EFLAGS: 00010202
> RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffff88807b9ae078
> RDX: 0000000000000001 RSI: 0000000000000000 RDI: 0000000000000008
> RBP: 0000000000000001 R08: 0000000000000001 R09: 0000000000000000
> R10: 0000000000000001 R11: 000000000000004f R12: dffffc0000000000
> R13: ffffffffffffffb8 R14: ffff88807b9ae000 R15: ffffc90003af1000
> FS: 0000000000000000(0000) GS:ffff8880b8700000(0000) knlGS:0000000000000000
> CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> CR2: 00007fffaca68fb8 CR3: 00000000791c8000 CR4: 00000000003526f0
> DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
> Call Trace:
> <TASK>
> __list_del_entry_valid include/linux/list.h:124 [inline]
> __list_del_entry include/linux/list.h:215 [inline]
> list_move_tail include/linux/list.h:310 [inline]
> swap_reclaim_full_clusters+0x109/0x460 mm/swapfile.c:748
> swap_reclaim_work+0x2e/0x40 mm/swapfile.c:779
The syzbot console output indicates a virtual environment where swapfile
is on a rotational device. In this case, clusters aren't actually used,
and si->full_clusters is not initialized. Daan's report is from qemu, so
likely rotational too.
Make sure to only schedule the cluster reclaim work when clusters are
actually in use.
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lore.kernel.org/lkml/[email protected]/
Link: https://github.com/systemd/systemd/issues/35044
Fixes: 5168a68eb78f ("mm, swap: avoid over reclaim of full clusters")
Reported-by: [email protected]
Signed-off-by: Johannes Weiner <[email protected]>
Reported-by: Daan De Meyer <[email protected]>
Cc: Kairui Song <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
It seems that the cacheflush syscall got broken when PAN for LPAE was
implemented. User access was not enabled around the cache maintenance
instructions, causing them to fault.
Fixes: 7af5b901e847 ("ARM: 9358/2: Implement PAN for LPAE by TTBR0 page table walks disablement")
Reported-by: Michał Pecio <[email protected]>
Tested-by: Michał Pecio <[email protected]>
Signed-off-by: Russell King (Oracle) <[email protected]>
|
|
There is a spelling mistake of 'absense' in comments which
should be 'absence'.
Link: https://lore.kernel.org/all/[email protected]/
Signed-off-by: WangYuli <[email protected]>
Reviewed-by: Vladimir Murzin <[email protected]>
Signed-off-by: Russell King (Oracle) <[email protected]>
|
|
When enabling expert mode CONFIG_EXPERT and using that power
user mode to disable the branch prediction hardening
!CONFIG_HARDEN_BRANCH_PREDICTOR, the assembly linker
in CLANG notices that some assembly in proc-v7.S does
not have corresponding C call sites, i.e. the prototypes
in proc-v7-bugs.c are enclosed in ifdef
CONFIG_HARDEN_BRANCH_PREDICTOR so this assembly:
SYM_TYPED_FUNC_START(cpu_v7_smc_switch_mm)
SYM_TYPED_FUNC_START(cpu_v7_hvc_switch_mm)
Results in:
ld.lld: error: undefined symbol: __kcfi_typeid_cpu_v7_smc_switch_mm
>>> referenced by proc-v7.S:94 (.../arch/arm/mm/proc-v7.S:94)
>>> arch/arm/mm/proc-v7.o:(.text+0x108) in archive vmlinux.a
ld.lld: error: undefined symbol: __kcfi_typeid_cpu_v7_hvc_switch_mm
>>> referenced by proc-v7.S:105 (.../arch/arm/mm/proc-v7.S:105)
>>> arch/arm/mm/proc-v7.o:(.text+0x124) in archive vmlinux.a
Fix this by adding an additional requirement that
CONFIG_HARDEN_BRANCH_PREDICTOR has to be enabled to compile
these assembly calls.
Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/
Reported-by: kernel test robot <[email protected]>
Reviewed-by: Nathan Chancellor <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Russell King (Oracle) <[email protected]>
|
|
When calculating the physical address range based on the iotlb and mr
[start,end) ranges, the offset of mr->start relative to map->start
is not taken into account. This leads to some incorrect and duplicate
mappings.
For the case when mr->start < map->start the code is already correct:
the range in [mr->start, map->start) was handled by a different
iteration.
Fixes: 94abbccdf291 ("vdpa/mlx5: Add shared memory registration code")
Cc: [email protected]
Signed-off-by: Si-Wei Liu <[email protected]>
Signed-off-by: Dragos Tatulea <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
Acked-by: Jason Wang <[email protected]>
|
|
There is a strapping issue on NBIO 7.7.0 that can lead to spurious PME
events while in the D0 state.
Co-developed-by: Mario Limonciello <[email protected]>
Signed-off-by: Vijendar Mukunda <[email protected]>
Signed-off-by: Mario Limonciello <[email protected]>
Acked-by: Alex Deucher <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alex Deucher <[email protected]>
(cherry picked from commit 447a54a0f79c9a409ceaa17804bdd2e0206397b9)
Cc: [email protected]
|
|
This reverts commit 694c79769cb384bca8b1ec1d1e84156e726bd106.
This was not the root cause. Revert.
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3678
Reviewed-by: Harry Wentland <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Cc: [email protected]
Cc: [email protected]
(cherry picked from commit 3c2296b1eec55b50c64509ba15406142d4a958dc)
Cc: [email protected] # 6.11.x
|
|
The static declaration causes the check to fail. Remove it.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3678
Fixes: 00c391102abc ("drm/amd/display: Add misc DC changes for DCN401")
Reviewed-by: Harry Wentland <[email protected]>
Signed-off-by: Hamish Claxton <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Cc: [email protected]
Cc: [email protected]
(cherry picked from commit 91314e7dfd83345b8b820b782b2511c9c32866cd)
Cc: [email protected] # 6.11.x
|
|
That is just a waste of time on APUs.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3704
Fixes: 216c1282dde3 ("drm/amdgpu: use GTT only as fallback for VRAM|GTT")
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Christian König <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
(cherry picked from commit e8fc090d322346e5ce4c4cfe03a8100e31f61c3c)
Cc: [email protected]
|
|
Pull kvm fixes from Paolo Bonzini:
"x86 and selftests fixes.
x86:
- When emulating a guest TLB flush for a nested guest, flush vpid01,
not vpid02, if L2 is active but VPID is disabled in vmcs12, i.e. if
L2 and L1 are sharing VPID '0' (from L1's perspective).
- Fix a bug in the SNP initialization flow where KVM would return '0'
to userspace instead of -errno on failure.
- Move the Intel PT virtualization (i.e. outputting host trace to
host buffer and guest trace to guest buffer) behind CONFIG_BROKEN.
- Fix memory leak on failure of KVM_SEV_SNP_LAUNCH_START
- Fix a bug where KVM fails to inject an interrupt from the IRR after
KVM_SET_LAPIC.
Selftests:
- Increase the timeout for the memslot performance selftest to avoid
false failures on arm64 and nested x86 platforms.
- Fix a goof in the guest_memfd selftest where a for-loop initialized
a bit mask to zero instead of BIT(0).
- Disable strict aliasing when building KVM selftests to prevent the
compiler from treating things like "u64 *" to "uint64_t *" cases as
undefined behavior, which can lead to nasty, hard to debug
failures.
- Force -march=x86-64-v2 for KVM x86 selftests if and only if the
uarch is supported by the compiler.
- Fix broken compilation of kvm selftests after a header sync in
tools/"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: VMX: Bury Intel PT virtualization (guest/host mode) behind CONFIG_BROKEN
KVM: x86: Unconditionally set irr_pending when updating APICv state
kvm: svm: Fix gctx page leak on invalid inputs
KVM: selftests: use X86_MEMTYPE_WB instead of VMX_BASIC_MEM_TYPE_WB
KVM: SVM: Propagate error from snp_guest_req_init() to userspace
KVM: nVMX: Treat vpid01 as current if L2 is active, but with VPID disabled
KVM: selftests: Don't force -march=x86-64-v2 if it's unsupported
KVM: selftests: Disable strict aliasing
KVM: selftests: fix unintentional noop test in guest_memfd_test.c
KVM: selftests: memslot_perf_test: increase guest sync timeout
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mikulas Patocka:
- fix warnings about duplicate slab cache names
* tag 'for-6.12/dm-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm-cache: fix warnings about duplicate slab caches
dm-bufio: fix warnings about duplicate slab caches
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity
Pull integrity fixes from Mimi Zohar:
"One bug fix, one performance improvement, and the use of
static_assert:
- The bug fix addresses "only a cosmetic change" commit, which didn't
take into account the original 'ima' template definition.
- The performance improvement limits the atomic_read()"
* tag 'integrity-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
integrity: Use static_assert() to check struct sizes
evm: stop avoidably reading i_writecount in evm_file_release
ima: fix buffer overrun in ima_eventdigest_init_common
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux
Pull landlock fixes from Mickaël Salaün:
"This fixes issues in the Landlock's sandboxer sample and
documentation, slightly refactors helpers (required for ongoing patch
series), and improve/fix a feature merged in v6.12 (signal and
abstract UNIX socket scoping)"
* tag 'landlock-6.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
landlock: Optimize scope enforcement
landlock: Refactor network access mask management
landlock: Refactor filesystem access mask management
samples/landlock: Clarify option parsing behaviour
samples/landlock: Refactor help message
samples/landlock: Fix port parsing in sandboxer
landlock: Fix grammar issues in documentation
landlock: Improve documentation of previous limitations
|
|
The qcom-cpucp mailbox irq is expected to function during suspend-resume
cycle particularly when the scmi cpufreq driver can query the current
frequency using the get_level message after the cpus are brought up during
resume. Hence mark the irq with IRQF_NO_SUSPEND flag to fix the do_xfer
failures we see during resume.
Err Logs:
arm-scmi firmware:scmi: timed out in resp(caller:do_xfer+0x164/0x568)
cpufreq: cpufreq_online: ->get() failed
Reported-by: Johan Hovold <[email protected]>
Closes: https://lore.kernel.org/lkml/[email protected]/
Fixes: 0e2a9a03106c ("mailbox: Add support for QTI CPUCP mailbox controller")
Signed-off-by: Sibi Sankar <[email protected]>
Reviewed-by: Konrad Dybcio <[email protected]>
Tested-by: Johan Hovold <[email protected]>
Cc: [email protected]
Message-ID: <[email protected]>
Signed-off-by: Ulf Hansson <[email protected]>
|
|
Duplicate opps reported by buggy SCP firmware currently show up
as warnings even though the only functional impact is that the
level/index remain inaccessible. Make it less scary for the end
user by using dev_info instead, along with FW_BUG tag.
Suggested-by: Johan Hovold <[email protected]>
Signed-off-by: Sibi Sankar <[email protected]>
Reviewed-by: Cristian Marussi <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Reviewed-by: Sudeep Holla <[email protected]>
Cc: [email protected]
Message-ID: <[email protected]>
Signed-off-by: Ulf Hansson <[email protected]>
|
|
Buggy firmware can reply with duplicated PERF opps descriptors.
Ensure that the bad duplicates reported by the platform firmware doesn't
get added to the opp-tables.
Reported-by: Johan Hovold <[email protected]>
Closes: https://lore.kernel.org/lkml/[email protected]/
Signed-off-by: Cristian Marussi <[email protected]>
Tested-by: Johan Hovold <[email protected]>
Reviewed-by: Sudeep Holla <[email protected]>
Cc: [email protected]
Message-ID: <[email protected]>
Signed-off-by: Ulf Hansson <[email protected]>
|
|
The commit 8396c793ffdf ("mmc: dw_mmc: Fix IDMAC operation with pages
bigger than 4K") increased the max_req_size, even for 4K pages, causing
various issues:
- Panic booting the kernel/rootfs from an SD card on Rockchip RK3566
- Panic booting the kernel/rootfs from an SD card on StarFive JH7100
- "swiotlb buffer is full" and data corruption on StarFive JH7110
At this stage no fix have been found, so it's probably better to just
revert the change.
This reverts commit 8396c793ffdf28bb8aee7cfe0891080f8cab7890.
Cc: [email protected]
Cc: Sam Protsenko <[email protected]>
Fixes: 8396c793ffdf ("mmc: dw_mmc: Fix IDMAC operation with pages bigger than 4K")
Closes: https://lore.kernel.org/linux-mmc/[email protected]/
Closes: https://lore.kernel.org/linux-mmc/CAC8uq=Ppnmv98mpa1CrWLawWoPnu5abtU69v-=G-P7ysATQ2Pw@mail.gmail.com/
Signed-off-by: Aurelien Jarno <[email protected]>
Message-ID: <[email protected]>
Signed-off-by: Ulf Hansson <[email protected]>
|
|
This test verifies that a hugepage, used as a user buffer for DIO
operations, is correctly freed upon unmapping. To test this, we read the
count of free hugepages before and after the mmap, DIO, and munmap
operations, then check if the free hugepage count is the same.
Reading free hugepages before the test was removed by commit 0268d4579901
('selftests: hugetlb_dio: check for initial conditions to skip at the
start'), causing the test to always fail.
This patch adds back reading the free hugepages before starting the test.
With this patch, the tests are now passing.
Test results without this patch:
./tools/testing/selftests/mm/hugetlb_dio
TAP version 13
1..4
# No. Free pages before allocation : 0
# No. Free pages after munmap : 100
not ok 1 : Huge pages not freed!
# No. Free pages before allocation : 0
# No. Free pages after munmap : 100
not ok 2 : Huge pages not freed!
# No. Free pages before allocation : 0
# No. Free pages after munmap : 100
not ok 3 : Huge pages not freed!
# No. Free pages before allocation : 0
# No. Free pages after munmap : 100
not ok 4 : Huge pages not freed!
# Totals: pass:0 fail:4 xfail:0 xpass:0 skip:0 error:0
Test results with this patch:
/tools/testing/selftests/mm/hugetlb_dio
TAP version 13
1..4
# No. Free pages before allocation : 100
# No. Free pages after munmap : 100
ok 1 : Huge pages freed successfully !
# No. Free pages before allocation : 100
# No. Free pages after munmap : 100
ok 2 : Huge pages freed successfully !
# No. Free pages before allocation : 100
# No. Free pages after munmap : 100
ok 3 : Huge pages freed successfully !
# No. Free pages before allocation : 100
# No. Free pages after munmap : 100
ok 4 : Huge pages freed successfully !
# Totals: pass:4 fail:0 xfail:0 xpass:0 skip:0 error:0
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 0268d4579901 ("selftests: hugetlb_dio: check for initial conditions to skip in the start")
Signed-off-by: Donet Tom <[email protected]>
Cc: Muhammad Usama Anjum <[email protected]>
Cc: Shuah Khan <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Though even more elusive than before, list_del corruption has still been
seen on THP's deferred split queue.
The idea in commit e66f3185fa04 was right, but its implementation wrong.
The context omitted an important comment just before the critical test:
"split_folio() removes folio from list on success." In ignoring that
comment, when a THP split succeeded, the code went on to release the
preceding safe folio, preserving instead an irrelevant (formerly head)
folio: which gives no safety because it's not on the list. Fix the logic.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: e66f3185fa04 ("mm/thp: fix deferred split queue not partially_mapped")
Signed-off-by: Hugh Dickins <[email protected]>
Acked-by: Usama Arif <[email protected]>
Reviewed-by: Zi Yan <[email protected]>
Cc: Baolin Wang <[email protected]>
Cc: Barry Song <[email protected]>
Cc: Chris Li <[email protected]>
Cc: David Hildenbrand <[email protected]>
Cc: Johannes Weiner <[email protected]>
Cc: Kefeng Wang <[email protected]>
Cc: Kirill A. Shutemov <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Nhat Pham <[email protected]>
Cc: Ryan Roberts <[email protected]>
Cc: Shakeel Butt <[email protected]>
Cc: Wei Yang <[email protected]>
Cc: Yang Shi <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
commit 53ba78de064b ("mm/gup: introduce
check_and_migrate_movable_folios()") created a new constraint on the
pin_user_pages*() API family: a potentially large internal allocation must
now occur, for FOLL_LONGTERM cases.
A user-visible consequence has now appeared: user space can no longer pin
more than 2GB of memory anymore on x86_64. That's because, on a 4KB
PAGE_SIZE system, when user space tries to (indirectly, via a device
driver that calls pin_user_pages()) pin 2GB, this requires an allocation
of a folio pointers array of MAX_PAGE_ORDER size, which is the limit for
kmalloc().
In addition to the directly visible effect described above, there is also
the problem of adding an unnecessary allocation. The **pages array
argument has already been allocated, and there is no need for a redundant
**folios array allocation in this case.
Fix this by avoiding the new allocation entirely. This is done by
referring to either the original page[i] within **pages, or to the
associated folio. Thanks to David Hildenbrand for suggesting this
approach and for providing the initial implementation (which I've tested
and adjusted slightly) as well.
[[email protected]: whitespace tweak, per David]
Link: https://lkml.kernel.org/r/[email protected]
[[email protected]: bypass pofs_get_folio(), per Oscar]
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 53ba78de064b ("mm/gup: introduce check_and_migrate_movable_folios()")
Signed-off-by: John Hubbard <[email protected]>
Suggested-by: David Hildenbrand <[email protected]>
Acked-by: David Hildenbrand <[email protected]>
Reviewed-by: Oscar Salvador <[email protected]>
Cc: Vivek Kasireddy <[email protected]>
Cc: Dave Airlie <[email protected]>
Cc: Gerd Hoffmann <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Jason Gunthorpe <[email protected]>
Cc: Peter Xu <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Daniel Vetter <[email protected]>
Cc: Dongwon Kim <[email protected]>
Cc: Hugh Dickins <[email protected]>
Cc: Junxiao Chang <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
It turns out that the Allwinner A100/A133 SoC only supports 8K DMA
blocks (13 bits wide), for both the SD/SDIO and eMMC instances.
And while this alone would make a trivial fix, the H616 falls back to
the A100 compatible string, so we have to now match the H616 compatible
string explicitly against the description advertising 64K DMA blocks.
As the A100 is now compatible with the D1 description, let the A100
compatible string point to that block instead, and introduce an explicit
match against the H616 string, pointing to the old description.
Also remove the redundant setting of clk_delays to NULL on the way.
Fixes: 3536b82e5853 ("mmc: sunxi: add support for A100 mmc controller")
Cc: [email protected]
Signed-off-by: Andre Przywara <[email protected]>
Tested-by: Parthiban Nallathambi <[email protected]>
Reviewed-by: Chen-Yu Tsai <[email protected]>
Message-ID: <[email protected]>
Signed-off-by: Ulf Hansson <[email protected]>
|
|
Have exception event part of HCI traces which helps for debug.
snoop traces:
> HCI Event: Vendor (0xff) plen 79
Vendor Prefix (0x8780)
Intel Extended Telemetry (0x03)
Unknown extended telemetry event type (0xde)
01 01 de
Unknown extended subevent 0x07
01 01 de 07 01 de 06 1c ef be ad de ef be ad de
ef be ad de ef be ad de ef be ad de ef be ad de
ef be ad de 05 14 ef be ad de ef be ad de ef be
ad de ef be ad de ef be ad de 43 10 ef be ad de
ef be ad de ef be ad de ef be ad de
Fixes: af395330abed ("Bluetooth: btintel: Add Intel devcoredump support")
Signed-off-by: Kiran K <[email protected]>
Signed-off-by: Luiz Augusto von Dentz <[email protected]>
|
|
Since 61a939c68ee0 ("Bluetooth: Queue incoming ACL data until
BT_CONNECTED state is reached") there is no long the need to call
mgmt_device_connected as ACL data will be queued until BT_CONNECTED
state.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219458
Link: https://github.com/bluez/bluez/issues/1014
Fixes: 333b4fd11e89 ("Bluetooth: L2CAP: Fix uaf in l2cap_connect")
Signed-off-by: Luiz Augusto von Dentz <[email protected]>
|
|
Fix the physical address calculation of the following to get smp working
on xip kernels.
- secondary_data needed for secondary cpu bootup.
- secondary_startup address passed through psci.
- identity mapped code region needed for enabling mmu for secondary cpus.
Signed-off-by: Harith George <[email protected]>
Reviewed-by: Linus Walleij <[email protected]>
Signed-off-by: Russell King (Oracle) <[email protected]>
|
|
The patchset introducing kernel_sec_start/end variables to separate the
kernel/lowmem memory mappings, broke the mapping of the kernel memory
for xipkernels.
kernel_sec_start/end variables are in RO area before the MMU is switched
on for xipkernels.
So these cannot be set early in boot in head.S. Fix this by setting these
after MMU is switched on.
xipkernels need two different mappings for kernel text (starting at
CONFIG_XIP_PHYS_ADDR) and data (starting at CONFIG_PHYS_OFFSET).
Also, move the kernel code mapping from devicemaps_init() to map_kernel().
Fixes: a91da5457085 ("ARM: 9089/1: Define kernel physical section start and end")
Signed-off-by: Harith George <[email protected]>
Reviewed-by: Linus Walleij <[email protected]>
Signed-off-by: Russell King (Oracle) <[email protected]>
|
|
Unfortunately, the wrong patch version was merged which places the
put_cpu() after enabling a static key, which is not safe as pointed by
Will [1], so move put_cpu() before to avoid this.
Fixes: 2840dadf0dde ("drivers: perf: Fix smp_processor_id() use in preemptible code")
Reported-by: Atish Patra <[email protected]>
Link: https://lore.kernel.org/all/20240827125335.GD4772@willie-the-truck/ [1]
Signed-off-by: Alexandre Ghiti <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Palmer Dabbelt <[email protected]>
|
|
The citied commit in Fixes line caused to regression for udaddy [1]
application. It doesn't work over VLANs anymore.
Client:
ifconfig eth2 1.1.1.1
ip link add link eth2 name p0.3597 type vlan protocol 802.1Q id 3597
ip link set dev p0.3597 up
ip addr add 2.2.2.2/16 dev p0.3597
udaddy -S 847 -C 220 -c 2 -t 0 -s 2.2.2.3 -b 2.2.2.2
Server:
ifconfig eth2 1.1.1.3
ip link add link eth2 name p0.3597 type vlan protocol 802.1Q id 3597
ip link set dev p0.3597 up
ip addr add 2.2.2.3/16 dev p0.3597
udaddy -S 847 -C 220 -c 2 -t 0 -b 2.2.2.3
[1] https://github.com/linux-rdma/rdma-core/blob/master/librdmacm/examples/udaddy.c
Fixes: 5069d7e202f6 ("RDMA/core: Fix ENODEV error for iWARP test over vlan")
Reported-by: Leon Romanovsky <[email protected]>
Closes: https://lore.kernel.org/all/20241110130746.GA48891@unreal
Link: https://patch.msgid.link/bb9d403419b2b9566da5b8bf0761fa8377927e49.1731401658.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <[email protected]>
|
|
Clevo platform with ALC255 Headset Mic was disable by default.
Assigned verb table for Mic pin will enable it.
Signed-off-by: Kailang Yang <[email protected]>
Cc: <[email protected]>
Link: https://lore.kernel.org/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
This patch switches the P-125 quirk entry to use a composite quirk as the
P-125 supplies both MIDI and Audio like many of the other Yamaha
keyboards
Signed-off-by: Eryk Zagorski <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
The max9768 has a custom control for playback mute which unconditionally
returns 0 from the put() operation, rather than returning 1 on change to
ensure notifications are generated to userspace. Check to see if the value
has changed and return appropriately.
Signed-off-by: Mark Brown <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Michal Luczaj says:
====================
virtio/vsock: Fix memory leaks
Short series fixing some memory leaks that I've stumbled upon while toying
with the selftests.
Signed-off-by: Michal Luczaj <[email protected]>
====================
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
|
|
Add a missing kfree_skb() to prevent memory leaks.
Fixes: 581512a6dc93 ("vsock/virtio: MSG_ZEROCOPY flag support")
Reviewed-by: Stefano Garzarella <[email protected]>
Signed-off-by: Michal Luczaj <[email protected]>
Acked-by: Arseniy Krasnov <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
Kernel queues MSG_ZEROCOPY completion notifications on the error queue.
Where they remain, until explicitly recv()ed. To prevent memory leaks,
clean up the queue when the socket is destroyed.
unreferenced object 0xffff8881028beb00 (size 224):
comm "vsock_test", pid 1218, jiffies 4294694897
hex dump (first 32 bytes):
90 b0 21 17 81 88 ff ff 90 b0 21 17 81 88 ff ff ..!.......!.....
00 00 00 00 00 00 00 00 00 b0 21 17 81 88 ff ff ..........!.....
backtrace (crc 6c7031ca):
[<ffffffff81418ef7>] kmem_cache_alloc_node_noprof+0x2f7/0x370
[<ffffffff81d35882>] __alloc_skb+0x132/0x180
[<ffffffff81d2d32b>] sock_omalloc+0x4b/0x80
[<ffffffff81d3a8ae>] msg_zerocopy_realloc+0x9e/0x240
[<ffffffff81fe5cb2>] virtio_transport_send_pkt_info+0x412/0x4c0
[<ffffffff81fe6183>] virtio_transport_stream_enqueue+0x43/0x50
[<ffffffff81fe0813>] vsock_connectible_sendmsg+0x373/0x450
[<ffffffff81d233d5>] ____sys_sendmsg+0x365/0x3a0
[<ffffffff81d246f4>] ___sys_sendmsg+0x84/0xd0
[<ffffffff81d26f47>] __sys_sendmsg+0x47/0x80
[<ffffffff820d3df3>] do_syscall_64+0x93/0x180
[<ffffffff8220012b>] entry_SYSCALL_64_after_hwframe+0x76/0x7e
Fixes: 581512a6dc93 ("vsock/virtio: MSG_ZEROCOPY flag support")
Signed-off-by: Michal Luczaj <[email protected]>
Reviewed-by: Stefano Garzarella <[email protected]>
Acked-by: Arseniy Krasnov <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
As the final stages of socket destruction may be delayed, it is possible
that virtio_transport_recv_listen() will be called after the accept_queue
has been flushed, but before the SOCK_DONE flag has been set. As a result,
sockets enqueued after the flush would remain unremoved, leading to a
memory leak.
vsock_release
__vsock_release
lock
virtio_transport_release
virtio_transport_close
schedule_delayed_work(close_work)
sk_shutdown = SHUTDOWN_MASK
(!) flush accept_queue
release
virtio_transport_recv_pkt
vsock_find_bound_socket
lock
if flag(SOCK_DONE) return
virtio_transport_recv_listen
child = vsock_create_connected
(!) vsock_enqueue_accept(child)
release
close_work
lock
virtio_transport_do_close
set_flag(SOCK_DONE)
virtio_transport_remove_sock
vsock_remove_sock
vsock_remove_bound
release
Introduce a sk_shutdown check to disallow vsock_enqueue_accept() during
socket destruction.
unreferenced object 0xffff888109e3f800 (size 2040):
comm "kworker/5:2", pid 371, jiffies 4294940105
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
28 00 0b 40 00 00 00 00 00 00 00 00 00 00 00 00 (..@............
backtrace (crc 9e5f4e84):
[<ffffffff81418ff1>] kmem_cache_alloc_noprof+0x2c1/0x360
[<ffffffff81d27aa0>] sk_prot_alloc+0x30/0x120
[<ffffffff81d2b54c>] sk_alloc+0x2c/0x4b0
[<ffffffff81fe049a>] __vsock_create.constprop.0+0x2a/0x310
[<ffffffff81fe6d6c>] virtio_transport_recv_pkt+0x4dc/0x9a0
[<ffffffff81fe745d>] vsock_loopback_work+0xfd/0x140
[<ffffffff810fc6ac>] process_one_work+0x20c/0x570
[<ffffffff810fce3f>] worker_thread+0x1bf/0x3a0
[<ffffffff811070dd>] kthread+0xdd/0x110
[<ffffffff81044fdd>] ret_from_fork+0x2d/0x50
[<ffffffff8100785a>] ret_from_fork_asm+0x1a/0x30
Fixes: 3fe356d58efa ("vsock/virtio: discard packets only when socket is really closed")
Reviewed-by: Stefano Garzarella <[email protected]>
Signed-off-by: Michal Luczaj <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
Grab the intel_display from 'encoder' rather than 'state'
in the encoder hooks to avoid the massive footgun that is
intel_sanitize_encoder(), which passes NULL as the 'state'
argument to encoder .disable() and .post_disable().
TODO: figure out how to actually fix intel_sanitize_encoder()...
Fixes: ab0b0eb5c85c ("drm/i915/tv: convert to struct intel_display")
Signed-off-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Reviewed-by: Jani Nikula <[email protected]>
(cherry picked from commit dc3806d9eb66d0105f8d55d462d4ef681d9eac59)
Signed-off-by: Joonas Lahtinen <[email protected]>
|
|
This runs on extents that haven't yet been validated, so we don't want
to assert that we have a valid entry type.
Reported-by: [email protected]
Signed-off-by: Kent Overstreet <[email protected]>
|
|
If the jset_entry_dev_usage is malformed, and too small, our nr_entries
calculation will be incorrect - just bail out.
Reported-by: [email protected]
Signed-off-by: Kent Overstreet <[email protected]>
|
|
Native IPI is used for AP booting, because it is the booting interface
between OS and BIOS firmware. The paravirt IPI is only used inside OS,
and native IPI is necessary to boot AP.
When booting AP, we write the kernel entry address in the HW mailbox of
AP and send IPI interrupt to it. AP executes idle instruction and waits
for interrupts or SW events, then clears IPI interrupt and jumps to the
kernel entry from HW mailbox.
Between writing HW mailbox and sending IPI, AP can be woken up by SW
events and jumps to the kernel entry, so ACTION_BOOT_CPU IPI interrupt
will keep pending during AP booting. And native IPI interrupt handler
needs be registered so that it can clear pending native IPI, else there
will be endless interrupts during AP booting stage.
Here native IPI interrupt is initialized even if paravirt IPI is used.
Cc: [email protected]
Fixes: 74c16b2e2b0c ("LoongArch: KVM: Add PV IPI support on guest side")
Signed-off-by: Bibo Mao <[email protected]>
Signed-off-by: Huacai Chen <[email protected]>
|
|
Currently, the kernel couldn't boot when ARCH_IOREMAP, ARCH_WRITECOMBINE
and KASAN are enabled together. Because DMW2 is used by kernel now which
is configured as 0xa000000000000000 for WriteCombine, but KASAN has no
segment mapping for it. This patch fix this issue.
Solution: Add the relevant definitions for WriteCombine (DMW2) in KASAN.
Cc: [email protected]
Fixes: 8e02c3b782ec ("LoongArch: Add writecombine support for DMW-based ioremap()")
Signed-off-by: Kanglong Wang <[email protected]>
Signed-off-by: Huacai Chen <[email protected]>
|
|
If PGDIR_SIZE is too large for cpu_vabits, KASAN_SHADOW_END will
overflow UINTPTR_MAX because KASAN_SHADOW_START/KASAN_SHADOW_END are
aligned up by PGDIR_SIZE. And then the overflowed KASAN_SHADOW_END looks
like a user space address.
For example, PGDIR_SIZE of CONFIG_4KB_4LEVEL is 2^39, which is too large
for Loongson-2K series whose cpu_vabits = 39.
Since CONFIG_4KB_4LEVEL is completely legal for CPUs with cpu_vabits <=
39, we just disable KASAN via early return in kasan_init(). Otherwise we
get a boot failure.
Moreover, we change KASAN_SHADOW_END from the first address after KASAN
shadow area to the last address in KASAN shadow area, in order to avoid
the end address exactly overflow to 0 (which is a legal case). We don't
need to worry about alignment because pgd_addr_end() can handle it.
Cc: [email protected]
Reviewed-by: Jiaxun Yang <[email protected]>
Signed-off-by: Huacai Chen <[email protected]>
|
|
Make KASAN work with 5-level page-tables, including:
1. Implement and use __pgd_none() and kasan_p4d_offset().
2. As done in kasan_pmd_populate() and kasan_pte_populate(), restrict
the loop conditions of kasan_p4d_populate() and kasan_pud_populate()
to avoid unnecessary population.
Cc: [email protected]
Signed-off-by: Huacai Chen <[email protected]>
|
|
This is a trivial cleanup, commit c62da0c35d58518d ("mm/vma: define a
default value for VM_DATA_DEFAULT_FLAGS") has unified default values of
VM_DATA_DEFAULT_FLAGS across different platforms.
Apply the same consistency to LoongArch.
Suggested-by: Wentao Guan <[email protected]>
Signed-off-by: Yuli Wang <[email protected]>
Signed-off-by: Huacai Chen <[email protected]>
|
|
early_numa_add_cpu() applies on physical CPU id rather than logical CPU
id, so use cpuid instead of cpu.
Cc: [email protected]
Fixes: 3de9c42d02a79a5 ("LoongArch: Add all CPUs enabled by fdt to NUMA node 0")
Reported-by: Bibo Mao <[email protected]>
Signed-off-by: Huacai Chen <[email protected]>
|
|
In order to support ACPI-based physical CPU hotplug, we suppose for all
"possible" CPUs cpu_logical_map() can work. Because some drivers want to
use cpu_logical_map() for all "possible" CPUs, while currently we only
setup logical-physical mapping for "present" CPUs. This lack of mapping
also causes cpu_to_node() cannot work for hot-added CPUs.
All "possible" CPUs are listed in MADT, and the "present" subset is
marked as ACPI_MADT_ENABLED. To setup logical-physical CPU mapping for
all possible CPUs and keep present CPUs continuous in cpu_present_mask,
we parse MADT twice. The first pass handles CPUs with ACPI_MADT_ENABLED
and the second pass handles CPUs without ACPI_MADT_ENABLED.
The global flag (cpu_enumerated) is removed because acpi_map_cpu() calls
cpu_number_map() rather than set_processor_mask() now.
Reported-by: Bibo Mao <[email protected]>
Signed-off-by: Huacai Chen <[email protected]>
|
|
All MTL and ARL SKUs share the same GSC FW, but the newer platforms are
only supported in newer blobs. In particular, ARL-S is supported
starting from 102.0.10.1878 (which is already the minimum required
version for ARL in the code), while ARL-H and ARL-U are supported from
102.1.15.1926. Therefore, the driver needs to check which specific ARL
subplatform its running on when verifying that the GSC FW is new enough
for it.
Fixes: 2955ae8186c8 ("drm/i915: ARL requires a newer GSC firmware")
Signed-off-by: Daniele Ceraolo Spurio <[email protected]>
Cc: John Harrison <[email protected]>
Cc: Rodrigo Vivi <[email protected]>
Reviewed-by: Rodrigo Vivi <[email protected]>
Reviewed-by: John Harrison <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit 3c1d5ced18db8a67251c8436cf9bdc061f972bdb)
Signed-off-by: Joonas Lahtinen <[email protected]>
|
|
Tariq Toukan says:
====================
mlx5 misc fixes 2024-11-07
This patchset provides misc bug fixes from the team to the mlx5 core and
Eth drivers.
====================
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
In Multi-PF (Socket Direct) configurations, when a loopback packet is
sent through one of the secondary devices, it will always be received
on the primary device. This causes the loopback layer to fail in
identifying the loopback packet as the devices are different.
To avoid false test failures, disable the loopback self-test in
Multi-PF configurations.
Fixes: ed29705e4ed1 ("net/mlx5: Enable SD feature")
Signed-off-by: Carolina Jubran <[email protected]>
Signed-off-by: Tariq Toukan <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
In error flow of mlx5_tc_ct_entry_add_rule(), in case ct_rule_add()
callback returns error, zone_rule->attr is used uninitiated. Fix it to
use attr which has the needed pointer value.
Kernel log:
BUG: kernel NULL pointer dereference, address: 0000000000000110
RIP: 0010:mlx5_tc_ct_entry_add_rule+0x2b1/0x2f0 [mlx5_core]
…
Call Trace:
<TASK>
? __die+0x20/0x70
? page_fault_oops+0x150/0x3e0
? exc_page_fault+0x74/0x140
? asm_exc_page_fault+0x22/0x30
? mlx5_tc_ct_entry_add_rule+0x2b1/0x2f0 [mlx5_core]
? mlx5_tc_ct_entry_add_rule+0x1d5/0x2f0 [mlx5_core]
mlx5_tc_ct_block_flow_offload+0xc6a/0xf90 [mlx5_core]
? nf_flow_offload_tuple+0xd8/0x190 [nf_flow_table]
nf_flow_offload_tuple+0xd8/0x190 [nf_flow_table]
flow_offload_work_handler+0x142/0x320 [nf_flow_table]
? finish_task_switch.isra.0+0x15b/0x2b0
process_one_work+0x16c/0x320
worker_thread+0x28c/0x3a0
? __pfx_worker_thread+0x10/0x10
kthread+0xb8/0xf0
? __pfx_kthread+0x10/0x10
ret_from_fork+0x2d/0x50
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
Fixes: 7fac5c2eced3 ("net/mlx5: CT: Avoid reusing modify header context for natted entries")
Signed-off-by: Moshe Shemesh <[email protected]>
Reviewed-by: Cosmin Ratiu <[email protected]>
Reviewed-by: Yevgeny Kliteynik <[email protected]>
Signed-off-by: Tariq Toukan <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|