aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2019-12-14ocxl: Fix potential memory leak on context creationFrederic Barrat1-4/+4
If we couldn't fully init a context, we were leaking memory. Fixes: b9721d275cc2 ("ocxl: Allow external drivers to use OpenCAPI contexts") Signed-off-by: Frederic Barrat <[email protected]> Acked-by: Andrew Donnellan <[email protected]> Reviewed-by: Greg Kurz <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2019-12-14powerpc/irq: fix stack overflow verificationChristophe Leroy1-2/+2
Before commit 0366a1c70b89 ("powerpc/irq: Run softirqs off the top of the irq stack"), check_stack_overflow() was called by do_IRQ(), before switching to the irq stack. In that commit, do_IRQ() was renamed __do_irq(), and is now executing on the irq stack, so check_stack_overflow() has just become almost useless. Move check_stack_overflow() call in do_IRQ() to do the check while still on the current stack. Fixes: 0366a1c70b89 ("powerpc/irq: Run softirqs off the top of the irq stack") Cc: [email protected] Signed-off-by: Christophe Leroy <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/e033aa8116ab12b7ca9a9c75189ad0741e3b9b5f.1575872340.git.christophe.leroy@c-s.fr
2019-12-13Merge tag 'omap-for-v5.5/fixes-rc1-signed' of ↵Olof Johansson6-5/+13
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes Fixes for omap variants for v5.5-rc1 cycle This series of changes contains fixes for issues recently noticed: - The ti-sysc interconnect target module driver needs fixes for mstandby quirk handling and reset delay - We need to configure am335x-sancloud-bbe to use rgmii-id mode because of the phy changes done earlier - NET_SWITCHDEV is no longer selected in Kconfig but a dependency and we must enable CONFIG_NET_SWITCHDEV to have TI_CPSW_SWITCHDEV - We are still relying on DEBUG_FS at least for PM configuration, let's add it back - We need to update compatible for am437x-gp/epos-evm because of the recent changes to use generic panels * tag 'omap-for-v5.5/fixes-rc1-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: bus: ti-sysc: Fix missing reset delay handling ARM: dts: am437x-gp/epos-evm: fix panel compatible ARM: omap2plus_defconfig: Add back DEBUG_FS ARM: omap2plus_defconfig: enable NET_SWITCHDEV ARM: dts: am335x-sancloud-bbe: fix phy mode bus: ti-sysc: Fix missing force mstandby quirk handling Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Olof Johansson <[email protected]>
2019-12-13Merge tag 'gpio-v5.5-rc2-fixes-for-linus' of ↵Linus Walleij7-24/+29
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into fixes gpio fixes for v5.5-rc2 - fix gpio-xtensa build failure - fix a regression in gpio-mockup - fix a gcc warning in gpio-aspeed - fix a section mismatch problem in xgs-iproc - fix a problem with emulated open-drain outputs in gpiolib core - switch to bitops in gpio-pca953x after converting the driver to using bitmap - add a missed file to MAINTAINERS entry
2019-12-13btrfs: send: remove WARN_ON for readonly mountAnand Jain1-6/+0
We log warning if root::orphan_cleanup_state is not set to ORPHAN_CLEANUP_DONE in btrfs_ioctl_send(). However if the filesystem is mounted as readonly we skip the orphan item cleanup during the lookup and root::orphan_cleanup_state remains at the init state 0 instead of ORPHAN_CLEANUP_DONE (2). So during send in btrfs_ioctl_send() we hit the warning as below. WARN_ON(send_root->orphan_cleanup_state != ORPHAN_CLEANUP_DONE); WARNING: CPU: 0 PID: 2616 at /Volumes/ws/btrfs-devel/fs/btrfs/send.c:7090 btrfs_ioctl_send+0xb2f/0x18c0 [btrfs] :: RIP: 0010:btrfs_ioctl_send+0xb2f/0x18c0 [btrfs] :: Call Trace: :: _btrfs_ioctl_send+0x7b/0x110 [btrfs] btrfs_ioctl+0x150a/0x2b00 [btrfs] :: do_vfs_ioctl+0xa9/0x620 ? __fget+0xac/0xe0 ksys_ioctl+0x60/0x90 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x49/0x130 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Reproducer: mkfs.btrfs -fq /dev/sdb mount /dev/sdb /btrfs btrfs subvolume create /btrfs/sv1 btrfs subvolume snapshot -r /btrfs/sv1 /btrfs/ss1 umount /btrfs mount -o ro /dev/sdb /btrfs btrfs send /btrfs/ss1 -f /tmp/f The warning exists because having orphan inodes could confuse send and cause it to fail or produce incorrect streams. The two cases that would cause such send failures, which are already fixed are: 1) Inodes that were unlinked - these are orphanized and remain with a link count of 0. These caused send operations to fail because it expected to always find at least one path for an inode. However this is no longer a problem since send is now able to deal with such inodes since commit 46b2f4590aab ("Btrfs: fix send failure when root has deleted files still open") and treats them as having been completely removed (the state after an orphan cleanup is performed). 2) Inodes that were in the process of being truncated. These resulted in send not knowing about the truncation and potentially issue write operations full of zeroes for the range from the new file size to the old file size. This is no longer a problem because we no longer create orphan items for truncation since commit f7e9e8fc792f ("Btrfs: stop creating orphan items for truncate"). As such before these commits, the WARN_ON here provided a clue in case something went wrong. Instead of being a warning against the root::orphan_cleanup_state value, it could have been more accurate by checking if there were actually any orphan items, and then issue a warning only if any exists, but that would be more expensive to check. Since orphanized inodes no longer cause problems for send, just remove the warning. Reported-by: Christoph Anton Mitterer <[email protected]> Link: https://lore.kernel.org/linux-btrfs/[email protected]/ CC: [email protected] # 4.19+ Suggested-by: Filipe Manana <[email protected]> Reviewed-by: Filipe Manana <[email protected]> Signed-off-by: Anand Jain <[email protected]> Signed-off-by: David Sterba <[email protected]>
2019-12-13btrfs: do not leak reloc root if we fail to read the fs rootJosef Bacik1-0/+1
If we fail to read the fs root corresponding with a reloc root we'll just break out and free the reloc roots. But we remove our current reloc_root from this list higher up, which means we'll leak this reloc_root. Fix this by adding ourselves back to the reloc_roots list so we are properly cleaned up. CC: [email protected] # 4.4+ Reviewed-by: Filipe Manana <[email protected]> Reviewed-by: Johannes Thumshirn <[email protected]> Signed-off-by: Josef Bacik <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]>
2019-12-13btrfs: skip log replay on orphaned rootsJosef Bacik1-2/+21
My fsstress modifications coupled with generic/475 uncovered a failure to mount and replay the log if we hit a orphaned root. We do not want to replay the log for an orphan root, but it's completely legitimate to have an orphaned root with a log attached. Fix this by simply skipping replaying the log. We still need to pin it's root node so that we do not overwrite it while replaying other logs, as we re-read the log root at every stage of the replay. CC: [email protected] # 4.4+ Reviewed-by: Filipe Manana <[email protected]> Signed-off-by: Josef Bacik <[email protected]> Signed-off-by: David Sterba <[email protected]>
2019-12-13btrfs: handle ENOENT in btrfs_uuid_tree_iterateJosef Bacik1-0/+2
If we get an -ENOENT back from btrfs_uuid_iter_rem when iterating the uuid tree we'll just continue and do btrfs_next_item(). However we've done a btrfs_release_path() at this point and no longer have a valid path. So increment the key and go back and do a normal search. CC: [email protected] # 4.4+ Reviewed-by: Filipe Manana <[email protected]> Reviewed-by: Johannes Thumshirn <[email protected]> Signed-off-by: Josef Bacik <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]>
2019-12-13btrfs: abort transaction after failed inode updates in create_subvolJosef Bacik1-2/+8
We can just abort the transaction here, and in fact do that for every other failure in this function except these two cases. CC: [email protected] # 4.4+ Reviewed-by: Filipe Manana <[email protected]> Reviewed-by: Johannes Thumshirn <[email protected]> Signed-off-by: Josef Bacik <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]>
2019-12-13Btrfs: fix hole extent items with a zero size after range cloningFilipe Manana1-11/+5
Normally when cloning a file range if we find an implicit hole at the end of the range we assume it is because the NO_HOLES feature is enabled. However that is not always the case. One well known case [1] is when we have a power failure after mixing buffered and direct IO writes against the same file. In such cases we need to punch a hole in the destination file, and if the NO_HOLES feature is not enabled, we need to insert explicit file extent items to represent the hole. After commit 690a5dbfc51315 ("Btrfs: fix ENOSPC errors, leading to transaction aborts, when cloning extents"), we started to insert file extent items representing the hole with an item size of 0, which is invalid and should be 53 bytes (the size of a btrfs_file_extent_item structure), resulting in all sorts of corruptions and invalid memory accesses. This is detected by the tree checker when we attempt to write a leaf to disk. The problem can be sporadically triggered by test case generic/561 from fstests. That test case does not exercise power failure and creates a new filesystem when it starts, so it does not use a filesystem created by any previous test that tests power failure. However the test does both buffered and direct IO writes (through fsstress) and it's precisely that which is creating the implicit holes in files. That happens even before the commit mentioned earlier. I need to investigate why we get those implicit holes to check if there is a real problem or not. For now this change fixes the regression of introducing file extent items with an item size of 0 bytes. Fix the issue by calling btrfs_punch_hole_range() without passing a btrfs_clone_extent_info structure, which ensures file extent items are inserted to represent the hole with a correct item size. We were passing a btrfs_clone_extent_info with a value of 0 for its 'item_size' field, which was causing the insertion of file extent items with an item size of 0. [1] https://www.spinics.net/lists/linux-btrfs/msg75350.html Reported-by: David Sterba <[email protected]> Fixes: 690a5dbfc51315 ("Btrfs: fix ENOSPC errors, leading to transaction aborts, when cloning extents") Signed-off-by: Filipe Manana <[email protected]> Reviewed-by: Josef Bacik <[email protected]> Signed-off-by: David Sterba <[email protected]>
2019-12-13Btrfs: fix removal logic of the tree mod log that leads to use-after-free issuesFilipe Manana1-1/+1
When a tree mod log user no longer needs to use the tree it calls btrfs_put_tree_mod_seq() to remove itself from the list of users and delete all no longer used elements of the tree's red black tree, which should be all elements with a sequence number less then our equals to the caller's sequence number. However the logic is broken because it can delete and free elements from the red black tree that have a sequence number greater then the caller's sequence number: 1) At a point in time we have sequence numbers 1, 2, 3 and 4 in the tree mod log; 2) The task which got assigned the sequence number 1 calls btrfs_put_tree_mod_seq(); 3) Sequence number 1 is deleted from the list of sequence numbers; 4) The current minimum sequence number is computed to be the sequence number 2; 5) A task using sequence number 2 is at tree_mod_log_rewind() and gets a pointer to one of its elements from the red black tree through a call to tree_mod_log_search(); 6) The task with sequence number 1 iterates the red black tree of tree modification elements and deletes (and frees) all elements with a sequence number less then or equals to 2 (the computed minimum sequence number) - it ends up only leaving elements with sequence numbers of 3 and 4; 7) The task with sequence number 2 now uses the pointer to its element, already freed by the other task, at __tree_mod_log_rewind(), resulting in a use-after-free issue. When CONFIG_DEBUG_PAGEALLOC=y it produces a trace like the following: [16804.546854] general protection fault: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC PTI [16804.547451] CPU: 0 PID: 28257 Comm: pool Tainted: G W 5.4.0-rc8-btrfs-next-51 #1 [16804.548059] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-0-ga698c8995f-prebuilt.qemu.org 04/01/2014 [16804.548666] RIP: 0010:rb_next+0x16/0x50 (...) [16804.550581] RSP: 0018:ffffb948418ef9b0 EFLAGS: 00010202 [16804.551227] RAX: 6b6b6b6b6b6b6b6b RBX: ffff90e0247f6600 RCX: 6b6b6b6b6b6b6b6b [16804.551873] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff90e0247f6600 [16804.552504] RBP: ffff90dffe0d4688 R08: 0000000000000001 R09: 0000000000000000 [16804.553136] R10: ffff90dffa4a0040 R11: 0000000000000000 R12: 000000000000002e [16804.553768] R13: ffff90e0247f6600 R14: 0000000000001663 R15: ffff90dff77862b8 [16804.554399] FS: 00007f4b197ae700(0000) GS:ffff90e036a00000(0000) knlGS:0000000000000000 [16804.555039] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [16804.555683] CR2: 00007f4b10022000 CR3: 00000002060e2004 CR4: 00000000003606f0 [16804.556336] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [16804.556968] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [16804.557583] Call Trace: [16804.558207] __tree_mod_log_rewind+0xbf/0x280 [btrfs] [16804.558835] btrfs_search_old_slot+0x105/0xd00 [btrfs] [16804.559468] resolve_indirect_refs+0x1eb/0xc70 [btrfs] [16804.560087] ? free_extent_buffer.part.19+0x5a/0xc0 [btrfs] [16804.560700] find_parent_nodes+0x388/0x1120 [btrfs] [16804.561310] btrfs_check_shared+0x115/0x1c0 [btrfs] [16804.561916] ? extent_fiemap+0x59d/0x6d0 [btrfs] [16804.562518] extent_fiemap+0x59d/0x6d0 [btrfs] [16804.563112] ? __might_fault+0x11/0x90 [16804.563706] do_vfs_ioctl+0x45a/0x700 [16804.564299] ksys_ioctl+0x70/0x80 [16804.564885] ? trace_hardirqs_off_thunk+0x1a/0x20 [16804.565461] __x64_sys_ioctl+0x16/0x20 [16804.566020] do_syscall_64+0x5c/0x250 [16804.566580] entry_SYSCALL_64_after_hwframe+0x49/0xbe [16804.567153] RIP: 0033:0x7f4b1ba2add7 (...) [16804.568907] RSP: 002b:00007f4b197adc88 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [16804.569513] RAX: ffffffffffffffda RBX: 00007f4b100210d8 RCX: 00007f4b1ba2add7 [16804.570133] RDX: 00007f4b100210d8 RSI: 00000000c020660b RDI: 0000000000000003 [16804.570726] RBP: 000055de05a6cfe0 R08: 0000000000000000 R09: 00007f4b197add44 [16804.571314] R10: 0000000000000000 R11: 0000000000000246 R12: 00007f4b197add48 [16804.571905] R13: 00007f4b197add40 R14: 00007f4b100210d0 R15: 00007f4b197add50 (...) [16804.575623] ---[ end trace 87317359aad4ba50 ]--- Fix this by making btrfs_put_tree_mod_seq() skip deletion of elements that have a sequence number equals to the computed minimum sequence number, and not just elements with a sequence number greater then that minimum. Fixes: bd989ba359f2ac ("Btrfs: add tree modification log functions") CC: [email protected] # 4.4+ Reviewed-by: Josef Bacik <[email protected]> Signed-off-by: Filipe Manana <[email protected]> Signed-off-by: David Sterba <[email protected]>
2019-12-13Btrfs: make tree checker detect checksum items with overlapping rangesFilipe Manana1-2/+16
Having checksum items, either on the checksums tree or in a log tree, that represent ranges that overlap each other is a sign of a corruption. Such case confuses the checksum lookup code and can result in not being able to find checksums or find stale checksums. So add a check for such case. This is motivated by a recent fix for a case where a log tree had checksum items covering ranges that overlap each other due to extent cloning, and resulted in missing checksums after replaying the log tree. It also helps detect past issues such as stale and outdated checksums due to overlapping, commit 27b9a8122ff71a ("Btrfs: fix csum tree corruption, duplicate and outdated checksums"). CC: [email protected] # 4.4+ Signed-off-by: Filipe Manana <[email protected]> Signed-off-by: David Sterba <[email protected]>
2019-12-13Btrfs: fix missing data checksums after replaying a log treeFilipe Manana4-9/+36
When logging a file that has shared extents (reflinked with other files or with itself), we can end up logging multiple checksum items that cover overlapping ranges. This confuses the search for checksums at log replay time causing some checksums to never be added to the fs/subvolume tree. Consider the following example of a file that shares the same extent at offsets 0 and 256Kb: [ bytenr 13893632, offset 64Kb, len 64Kb ] 0 64Kb [ bytenr 13631488, offset 64Kb, len 192Kb ] 64Kb 256Kb [ bytenr 13893632, offset 0, len 256Kb ] 256Kb 512Kb When logging the inode, at tree-log.c:copy_items(), when processing the file extent item at offset 0, we log a checksum item covering the range 13959168 to 14024704, which corresponds to 13893632 + 64Kb and 13893632 + 64Kb + 64Kb, respectively. Later when processing the extent item at offset 256K, we log the checksums for the range from 13893632 to 14155776 (which corresponds to 13893632 + 256Kb). These checksums get merged with the checksum item for the range from 13631488 to 13893632 (13631488 + 256Kb), logged by a previous fsync. So after this we get the two following checksum items in the log tree: (...) item 6 key (EXTENT_CSUM EXTENT_CSUM 13631488) itemoff 3095 itemsize 512 range start 13631488 end 14155776 length 524288 item 7 key (EXTENT_CSUM EXTENT_CSUM 13959168) itemoff 3031 itemsize 64 range start 13959168 end 14024704 length 65536 The first one covers the range from the second one, they overlap. So far this does not cause a problem after replaying the log, because when replaying the file extent item for offset 256K, we copy all the checksums for the extent 13893632 from the log tree to the fs/subvolume tree, since searching for an checksum item for bytenr 13893632 leaves us at the first checksum item, which covers the whole range of the extent. However if we write 64Kb to file offset 256Kb for example, we will not be able to find and copy the checksums for the last 128Kb of the extent at bytenr 13893632, referenced by the file range 384Kb to 512Kb. After writing 64Kb into file offset 256Kb we get the following extent layout for our file: [ bytenr 13893632, offset 64K, len 64Kb ] 0 64Kb [ bytenr 13631488, offset 64Kb, len 192Kb ] 64Kb 256Kb [ bytenr 14155776, offset 0, len 64Kb ] 256Kb 320Kb [ bytenr 13893632, offset 64Kb, len 192Kb ] 320Kb 512Kb After fsync'ing the file, if we have a power failure and then mount the filesystem to replay the log, the following happens: 1) When replaying the file extent item for file offset 320Kb, we lookup for the checksums for the extent range from 13959168 (13893632 + 64Kb) to 14155776 (13893632 + 256Kb), through a call to btrfs_lookup_csums_range(); 2) btrfs_lookup_csums_range() finds the checksum item that starts precisely at offset 13959168 (item 7 in the log tree, shown before); 3) However that checksum item only covers 64Kb of data, and not 192Kb of data; 4) As a result only the checksums for the first 64Kb of data referenced by the file extent item are found and copied to the fs/subvolume tree. The remaining 128Kb of data, file range 384Kb to 512Kb, doesn't get the corresponding data checksums found and copied to the fs/subvolume tree. 5) After replaying the log userspace will not be able to read the file range from 384Kb to 512Kb, because the checksums are missing and resulting in an -EIO error. The following steps reproduce this scenario: $ mkfs.btrfs -f /dev/sdc $ mount /dev/sdc /mnt/sdc $ xfs_io -f -c "pwrite -S 0xa3 0 256K" /mnt/sdc/foobar $ xfs_io -c "fsync" /mnt/sdc/foobar $ xfs_io -c "pwrite -S 0xc7 256K 256K" /mnt/sdc/foobar $ xfs_io -c "reflink /mnt/sdc/foobar 320K 0 64K" /mnt/sdc/foobar $ xfs_io -c "fsync" /mnt/sdc/foobar $ xfs_io -c "pwrite -S 0xe5 256K 64K" /mnt/sdc/foobar $ xfs_io -c "fsync" /mnt/sdc/foobar <power failure> $ mount /dev/sdc /mnt/sdc $ md5sum /mnt/sdc/foobar md5sum: /mnt/sdc/foobar: Input/output error $ dmesg | tail [165305.003464] BTRFS info (device sdc): no csum found for inode 257 start 401408 [165305.004014] BTRFS info (device sdc): no csum found for inode 257 start 405504 [165305.004559] BTRFS info (device sdc): no csum found for inode 257 start 409600 [165305.005101] BTRFS info (device sdc): no csum found for inode 257 start 413696 [165305.005627] BTRFS info (device sdc): no csum found for inode 257 start 417792 [165305.006134] BTRFS info (device sdc): no csum found for inode 257 start 421888 [165305.006625] BTRFS info (device sdc): no csum found for inode 257 start 425984 [165305.007278] BTRFS info (device sdc): no csum found for inode 257 start 430080 [165305.008248] BTRFS warning (device sdc): csum failed root 5 ino 257 off 393216 csum 0x1337385e expected csum 0x00000000 mirror 1 [165305.009550] BTRFS warning (device sdc): csum failed root 5 ino 257 off 393216 csum 0x1337385e expected csum 0x00000000 mirror 1 Fix this simply by deleting first any checksums, from the log tree, for the range of the extent we are logging at copy_items(). This ensures we do not get checksum items in the log tree that have overlapping ranges. This is a long time issue that has been present since we have the clone (and deduplication) ioctl, and can happen both when an extent is shared between different files and within the same file. A test case for fstests follows soon. CC: [email protected] # 4.4+ Signed-off-by: Filipe Manana <[email protected]> Signed-off-by: David Sterba <[email protected]>
2019-12-13btrfs: return error pointer from alloc_test_extent_bufferDan Carpenter3-6/+8
Callers of alloc_test_extent_buffer have not correctly interpreted the return value as error pointer, as alloc_test_extent_buffer should behave as alloc_extent_buffer. The self-tests were unaffected but btrfs_find_create_tree_block could call both functions and that would cause problems up in the call chain. Fixes: faa2dbf004e8 ("Btrfs: add sanity tests for new qgroup accounting code") CC: [email protected] # 4.4+ Signed-off-by: Dan Carpenter <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]>
2019-12-13btrfs: fix devs_max constraints for raid1c3 and raid1c4David Sterba1-2/+2
The value 0 for devs_max means to spread the allocated chunks over all available devices, eg. stripe for RAID0 or RAID5. This got mistakenly copied to the RAID1C3/4 profiles. The intention is to have exactly 3 and 4 copies respectively. Fixes: 47e6f7423b91 ("btrfs: add support for 3-copy replication (raid1c3)") Fixes: 8d6fac0087e5 ("btrfs: add support for 4-copy replication (raid1c4)") Signed-off-by: David Sterba <[email protected]>
2019-12-13btrfs: tree-checker: Fix error format string for size_tAndreas Färber1-1/+1
Argument BTRFS_FILE_EXTENT_INLINE_DATA_START is defined as offsetof(), which returns type size_t, so we need %zu instead of %lu. This fixes a build warning on 32-bit ARM: ../fs/btrfs/tree-checker.c: In function 'check_extent_data_item': ../fs/btrfs/tree-checker.c:230:43: warning: format '%lu' expects argument of type 'long unsigned int', but argument 5 has type 'unsigned int' [-Wformat=] 230 | "invalid item size, have %u expect [%lu, %u)", | ~~^ | long unsigned int | %u Fixes: 153a6d299956 ("btrfs: tree-checker: Check item size before reading file extent type") Acked-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Andreas Färber <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]>
2019-12-13btrfs: don't double lock the subvol_sem for rename exchangeJosef Bacik1-6/+4
If we're rename exchanging two subvols we'll try to lock this lock twice, which is bad. Just lock once if either of the ino's are subvols. Fixes: cdd1fedf8261 ("btrfs: add support for RENAME_EXCHANGE and RENAME_WHITEOUT") CC: [email protected] # 4.4+ Signed-off-by: Josef Bacik <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]>
2019-12-13btrfs: handle error in btrfs_cache_block_groupJosef Bacik1-2/+18
We have a BUG_ON(ret < 0) in find_free_extent from btrfs_cache_block_group. If we fail to allocate our ctl we'll just panic, which is not good. Instead just go on to another block group. If we fail to find a block group we don't want to return ENOSPC, because really we got a ENOMEM and that's the root of the problem. Save our return from btrfs_cache_block_group(), and then if we still fail to make our allocation return that ret so we get the right error back. Tested with inject-error.py from bcc. Reviewed-by: Johannes Thumshirn <[email protected]> Signed-off-by: Josef Bacik <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]>
2019-12-13btrfs: do not call synchronize_srcu() in inode_tree_delJosef Bacik1-2/+0
Testing with the new fsstress uncovered a pretty nasty deadlock with lookup and snapshot deletion. Process A unlink -> final iput -> inode_tree_del -> synchronize_srcu(subvol_srcu) Process B btrfs_lookup <- srcu_read_lock() acquired here -> btrfs_iget -> find inode that has I_FREEING set -> __wait_on_freeing_inode() We're holding the srcu_read_lock() while doing the iget in order to make sure our fs root doesn't go away, and then we are waiting for the inode to finish freeing. However because the free'ing process is doing a synchronize_srcu() we deadlock. Fix this by dropping the synchronize_srcu() in inode_tree_del(). We don't need people to stop accessing the fs root at this point, we're only adding our empty root to the dead roots list. A larger much more invasive fix is forthcoming to address how we deal with fs roots, but this fixes the immediate problem. Fixes: 76dda93c6ae2 ("Btrfs: add snapshot/subvolume destroy ioctl") CC: [email protected] # 4.4+ Signed-off-by: Josef Bacik <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]>
2019-12-13ARM: shmobile: defconfig: Restore debugfs supportGeert Uytterhoeven1-0/+1
Since commit 0e4a459f56c32d3e ("tracing: Remove unnecessary DEBUG_FS dependency"), CONFIG_DEBUG_FS is no longer auto-enabled. This breaks booting Debian 9, as systemd needs debugfs: [FAILED] Failed to mount /sys/kernel/debug. See 'systemctl status sys-kernel-debug.mount' for details. [DEPEND] Dependency failed for Local File Systems. ... You are in emergGive root password for maintenance (or press Control-D to continue): Fix this by enabling CONFIG_DEBUG_FS explicitly. See also commit 18977008f44c66bd ("ARM: multi_v7_defconfig: Restore debugfs support"). Signed-off-by: Geert Uytterhoeven <[email protected]> Reviewed-by: Niklas Söderlund <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2019-12-13Btrfs: fix cloning range with a hole when using the NO_HOLES featureFilipe Manana1-2/+2
When using the NO_HOLES feature if we clone a range that contains a hole and a temporary ENOSPC happens while dropping extents from the target inode's range, we can end up failing and aborting the transaction with -EEXIST or with a corrupt file extent item, that has a length greater than it should and overlaps with other extents. For example when cloning the following range from inode A to inode B: Inode A: extent A1 extent A2 [ ----------- ] [ hole, implicit, 4MB length ] [ ------------- ] 0 1MB 5MB 6MB Range to clone: [1MB, 6MB) Inode B: extent B1 extent B2 extent B3 extent B4 [ ---------- ] [ --------- ] [ ---------- ] [ ---------- ] 0 1MB 1MB 2MB 2MB 5MB 5MB 6MB Target range: [1MB, 6MB) (same as source, to make it easier to explain) The following can happen: 1) btrfs_punch_hole_range() gets -ENOSPC from __btrfs_drop_extents(); 2) At that point, 'cur_offset' is set to 1MB and __btrfs_drop_extents() set 'drop_end' to 2MB, meaning it was able to drop only extent B2; 3) We then compute 'clone_len' as 'drop_end' - 'cur_offset' = 2MB - 1MB = 1MB; 4) We then attempt to insert a file extent item at inode B with a file offset of 5MB, which is the value of clone_info->file_offset. This fails with error -EEXIST because there's already an extent at that offset (extent B4); 5) We abort the current transaction with -EEXIST and return that error to user space as well. Another example, for extent corruption: Inode A: extent A1 extent A2 [ ----------- ] [ hole, implicit, 10MB length ] [ ------------- ] 0 1MB 11MB 12MB Inode B: extent B1 extent B2 [ ----------- ] [ --------- ] [ ----------------------------- ] 0 1MB 1MB 5MB 5MB 12MB Target range: [1MB, 12MB) (same as source, to make it easier to explain) 1) btrfs_punch_hole_range() gets -ENOSPC from __btrfs_drop_extents(); 2) At that point, 'cur_offset' is set to 1MB and __btrfs_drop_extents() set 'drop_end' to 5MB, meaning it was able to drop only extent B2; 3) We then compute 'clone_len' as 'drop_end' - 'cur_offset' = 5MB - 1MB = 4MB; 4) We then insert a file extent item at inode B with a file offset of 11MB which is the value of clone_info->file_offset, and a length of 4MB (the value of 'clone_len'). So we get 2 extents items with ranges that overlap and an extent length of 4MB, larger then the extent A2 from inode A (1MB length); 5) After that we end the transaction, balance the btree dirty pages and then start another or join the previous transaction. It might happen that the transaction which inserted the incorrect extent was committed by another task so we end up with extent corruption if a power failure happens. So fix this by making sure we attempt to insert the extent to clone at the destination inode only if we are past dropping the sub-range that corresponds to a hole. Fixes: 690a5dbfc51315 ("Btrfs: fix ENOSPC errors, leading to transaction aborts, when cloning extents") Signed-off-by: Filipe Manana <[email protected]> Signed-off-by: David Sterba <[email protected]>
2019-12-13btrfs: Fix error messages in qgroup_rescan_initNikolay Borisov1-2/+2
The branch of qgroup_rescan_init which is executed from the mount path prints wrong errors messages. The textual print out in case BTRFS_QGROUP_STATUS_FLAG_RESCAN/BTRFS_QGROUP_STATUS_FLAG_ON are not set are transposed. Fix it by exchanging their place. Signed-off-by: Nikolay Borisov <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]>
2019-12-13powerpc: Ensure that swiotlb buffer is allocated from low memoryMike Rapoport1-0/+8
Some powerpc platforms (e.g. 85xx) limit DMA-able memory way below 4G. If a system has more physical memory than this limit, the swiotlb buffer is not addressable because it is allocated from memblock using top-down mode. Force memblock to bottom-up mode before calling swiotlb_init() to ensure that the swiotlb buffer is DMA-able. Reported-by: Christian Zigotzky <[email protected]> Signed-off-by: Mike Rapoport <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2019-12-13powerpc/shared: Use static key to detect shared processorSrikar Dronamraju1-7/+2
With the static key shared processor available, is_shared_processor() can return without having to query the lppaca structure. Signed-off-by: Srikar Dronamraju <[email protected]> Acked-by: Phil Auld <[email protected]> Acked-by: Waiman Long <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2019-12-13powerpc/vcpu: Assume dedicated processors as non-preemptSrikar Dronamraju2-1/+10
With commit 247f2f6f3c70 ("sched/core: Don't schedule threads on pre-empted vCPUs"), the scheduler avoids preempted vCPUs to schedule tasks on wakeup. This leads to wrong choice of CPU, which in-turn leads to larger wakeup latencies. Eventually, it leads to performance regression in latency sensitive benchmarks like soltp, schbench etc. On Powerpc, vcpu_is_preempted() only looks at yield_count. If the yield_count is odd, the vCPU is assumed to be preempted. However yield_count is increased whenever the LPAR enters CEDE state (idle). So any CPU that has entered CEDE state is assumed to be preempted. Even if vCPU of dedicated LPAR is preempted/donated, it should have right of first-use since they are supposed to own the vCPU. On a Power9 System with 32 cores: # lscpu Architecture: ppc64le Byte Order: Little Endian CPU(s): 128 On-line CPU(s) list: 0-127 Thread(s) per core: 8 Core(s) per socket: 1 Socket(s): 16 NUMA node(s): 2 Model: 2.2 (pvr 004e 0202) Model name: POWER9 (architected), altivec supported Hypervisor vendor: pHyp Virtualization type: para L1d cache: 32K L1i cache: 32K L2 cache: 512K L3 cache: 10240K NUMA node0 CPU(s): 0-63 NUMA node1 CPU(s): 64-127 # perf stat -a -r 5 ./schbench v5.4 v5.4 + patch Latency percentiles (usec) Latency percentiles (usec) 50.0000th: 45 50.0th: 45 75.0000th: 62 75.0th: 63 90.0000th: 71 90.0th: 74 95.0000th: 77 95.0th: 78 *99.0000th: 91 *99.0th: 82 99.5000th: 707 99.5th: 83 99.9000th: 6920 99.9th: 86 min=0, max=10048 min=0, max=96 Latency percentiles (usec) Latency percentiles (usec) 50.0000th: 45 50.0th: 46 75.0000th: 61 75.0th: 64 90.0000th: 72 90.0th: 75 95.0000th: 79 95.0th: 79 *99.0000th: 691 *99.0th: 83 99.5000th: 3972 99.5th: 85 99.9000th: 8368 99.9th: 91 min=0, max=16606 min=0, max=117 Latency percentiles (usec) Latency percentiles (usec) 50.0000th: 45 50.0th: 46 75.0000th: 61 75.0th: 64 90.0000th: 71 90.0th: 75 95.0000th: 77 95.0th: 79 *99.0000th: 106 *99.0th: 83 99.5000th: 2364 99.5th: 84 99.9000th: 7480 99.9th: 90 min=0, max=10001 min=0, max=95 Latency percentiles (usec) Latency percentiles (usec) 50.0000th: 45 50.0th: 47 75.0000th: 62 75.0th: 65 90.0000th: 72 90.0th: 75 95.0000th: 78 95.0th: 79 *99.0000th: 93 *99.0th: 84 99.5000th: 108 99.5th: 85 99.9000th: 6792 99.9th: 90 min=0, max=17681 min=0, max=117 Latency percentiles (usec) Latency percentiles (usec) 50.0000th: 46 50.0th: 45 75.0000th: 62 75.0th: 64 90.0000th: 73 90.0th: 75 95.0000th: 79 95.0th: 79 *99.0000th: 113 *99.0th: 82 99.5000th: 2724 99.5th: 83 99.9000th: 6184 99.9th: 93 min=0, max=9887 min=0, max=111 Performance counter stats for 'system wide' (5 runs): context-switches 43,373 ( +- 0.40% ) 44,597 ( +- 0.55% ) cpu-migrations 1,211 ( +- 5.04% ) 220 ( +- 6.23% ) page-faults 15,983 ( +- 5.21% ) 15,360 ( +- 3.38% ) Waiman Long suggested using static_keys. Fixes: 247f2f6f3c70 ("sched/core: Don't schedule threads on pre-empted vCPUs") Cc: [email protected] # v4.18+ Reported-by: Parth Shah <[email protected]> Reported-by: Ihor Pasichnyk <[email protected]> Tested-by: Juri Lelli <[email protected]> Acked-by: Waiman Long <[email protected]> Reviewed-by: Gautham R. Shenoy <[email protected]> Signed-off-by: Srikar Dronamraju <[email protected]> Acked-by: Phil Auld <[email protected]> Reviewed-by: Vaidyanathan Srinivasan <[email protected]> Tested-by: Parth Shah <[email protected]> [mpe: Move the key and setting of the key to pseries/setup.c] Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2019-12-13pinctrl: Modify Kconfig to fix linker errorRahul Tanwar1-0/+1
Fix below linker error ld: drivers/pinctrl/pinctrl-equilibrium.o: in function `pinconf_generic_dt_node_to_map_all': pinctrl-equilibrium.c:(.text+0xb): undefined reference to `pinconf_generic_dt_node_to_map' Caused by below commit 1948d5c51dba ("pinctrl: Add pinmux & GPIO controller driver for a new SoC") by adding 'depends on OF' in Kconfig driver entry. Reported-by: Randy Dunlap <[email protected]>> Signed-off-by: Rahul Tanwar <[email protected]> Link: https://lore.kernel.org/r/ba937f271d1a2173828a2325990d62cb36d61595.1575514110.git.rahul.tanwar@linux.intel.com Acked-by: Randy Dunlap <[email protected]> # build-tested Signed-off-by: Linus Walleij <[email protected]>
2019-12-13Merge tag 'intel-pinctrl-v5.5-2' of ↵Linus Walleij2-134/+173
git://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/intel into fixes intel-pinctrl for v5.5-2 * Fix Baytrail silicon issue by using a global lock * Fix North community pin names that user will assume their functions * Convert Cherryview and Baytrail to pass IRQ chip along with GPIO one The following is an automated git shortlog grouped by driver: baytrail: - Pass irqchip when adding gpiochip - Add GPIO <-> pin mapping ranges via callback - Update North Community pin list - Really serialize all register accesses cherryview: - Pass irqchip when adding gpiochip - Add GPIO <-> pin mapping ranges via callback - Split out irq hw-init into a separate helper function
2019-12-13pinctrl: pinmux: fix a possible null pointer in pinmux_can_be_used_for_gpioAlexandre Torgue1-1/+1
This commit adds a check on ops pointer to avoid a kernel panic when ops->strict is used. Indeed, on some pinctrl driver (at least for pinctrl-stmfx) the pinmux ops is not implemented. Let's assume than gpio can be used in this case. Fixes: 472a61e777fe ("pinctrl/gpio: Take MUX usage into account") Signed-off-by: Alexandre Torgue <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Linus Walleij <[email protected]>
2019-12-13mac80211: Turn AQL into an NL80211_EXT_FEATUREToke Høiland-Jørgensen7-24/+70
Instead of just having an airtime flag in debugfs, turn AQL into a proper NL80211_EXT_FEATURE, so drivers can turn it on when they are ready, and so we also expose the presence of the feature to userspace. This also has the effect of flipping the default, so drivers have to opt in to using AQL instead of getting it by default with TXQs. To keep functionality the same as pre-patch, we set this feature for ath10k (which is where it is needed the most). While we're at it, split out the debugfs interface so AQL gets its own per-station debugfs file instead of using the 'airtime' file. [Johannes:] This effectively disables AQL for iwlwifi, where it fixes a number of issues: * TSO in iwlwifi is causing underflows and associated warnings in AQL * HE (802.11ax) rates aren't reported properly so at HE rates, AQL could never have a valid estimate (it'd use 6 Mbps instead of up to 2400!) Signed-off-by: Toke Høiland-Jørgensen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Fixes: 3ace10f5b5ad ("mac80211: Implement Airtime-based Queue Limit (AQL)") Signed-off-by: Johannes Berg <[email protected]>
2019-12-13Merge branches 'pm-cpuidle' and 'acpi-pm'Rafael J. Wysocki3-2/+23
* pm-cpuidle: cpuidle: Drop unnecessary type cast in cpuidle_poll_time() cpuidle: Fix cpuidle_driver_state_disabled() cpuidle: use first valid target residency as poll time * acpi-pm: ACPI: PM: Avoid attaching ACPI PM domain to certain devices
2019-12-13mac80211: airtime: Fix an off by one in ieee80211_calc_rx_airtime()Dan Carpenter1-1/+1
This code was copied from mt76 and inherited an off by one bug from there. The > should be >= so that we don't read one element beyond the end of the array. Fixes: db3e1c40cf2f ("mac80211: Import airtime calculation code from mt76") Reported-by: Toke Høiland-Jørgensen <[email protected]> Signed-off-by: Dan Carpenter <[email protected]> Acked-by: Toke Høiland-Jørgensen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Johannes Berg <[email protected]>
2019-12-13cfg80211: fix double-free after changing network namespaceStefan Bühler1-0/+1
If wdev->wext.keys was initialized it didn't get reset to NULL on unregister (and it doesn't get set in cfg80211_init_wdev either), but wdev is reused if unregister was triggered through cfg80211_switch_netns. The next unregister (for whatever reason) will try to free wdev->wext.keys again. Signed-off-by: Stefan Bühler <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Johannes Berg <[email protected]>
2019-12-13mac80211: fix TID field in monitor mode transmitFredrik Olofsson1-0/+9
Fix overwriting of the qos_ctrl.tid field for encrypted frames injected on a monitor interface. While qos_ctrl.tid is not encrypted, it's used as an input into the encryption algorithm so it's protected, and thus cannot be modified after encryption. For injected frames, the encryption may already have been done in userspace, so we cannot change any fields. Before passing the frame to the driver, the qos_ctrl.tid field is updated from skb->priority. Prior to dbd50a851c50 skb->priority was updated in ieee80211_select_queue_80211(), but this function is no longer always called. Update skb->priority in ieee80211_monitor_start_xmit() so that the value is stored, and when later code 'modifies' the TID it really sets it to the same value as before, preserving the encryption. Fixes: dbd50a851c50 ("mac80211: only allocate one queue when using iTXQs") Signed-off-by: Fredrik Olofsson <[email protected]> Link: https://lore.kernel.org/r/[email protected] [rewrite commit message based on our discussion] Signed-off-by: Johannes Berg <[email protected]>
2019-12-13xen/balloon: fix ballooned page accounting without hotplug enabledJuergen Gross1-1/+2
When CONFIG_XEN_BALLOON_MEMORY_HOTPLUG is not defined reserve_additional_memory() will set balloon_stats.target_pages to a wrong value in case there are still some ballooned pages allocated via alloc_xenballooned_pages(). This will result in balloon_process() no longer be triggered when ballooned pages are freed in batches. Reported-by: Nicholas Tsirakis <[email protected]> Signed-off-by: Juergen Gross <[email protected]> Reviewed-by: Boris Ostrovsky <[email protected]> Signed-off-by: Juergen Gross <[email protected]>
2019-12-13xen-blkback: prevent premature module unloadPaul Durrant1-0/+10
Objects allocated by xen_blkif_alloc come from the 'blkif_cache' kmem cache. This cache is destoyed when xen-blkif is unloaded so it is necessary to wait for the deferred free routine used for such objects to complete. This necessity was missed in commit 14855954f636 "xen-blkback: allow module to be cleanly unloaded". This patch fixes the problem by taking/releasing extra module references in xen_blkif_alloc/free() respectively. Signed-off-by: Paul Durrant <[email protected]> Reviewed-by: Roger Pau Monné <[email protected]> Signed-off-by: Juergen Gross <[email protected]>
2019-12-13CIFS: Close cached root handle only if it has a leasePavel Shilovsky5-4/+25
SMB2_tdis() checks if a root handle is valid in order to decide whether it needs to close the handle or not. However if another thread has reference for the handle, it may end up with putting the reference twice. The extra reference that we want to put during the tree disconnect is the reference that has a directory lease. So, track the fact that we have a directory lease and close the handle only in that case. Signed-off-by: Pavel Shilovsky <[email protected]> Reviewed-by: Ronnie Sahlberg <[email protected]> Signed-off-by: Steve French <[email protected]>
2019-12-13SMB3: Fix crash in SMB2_open_init due to uninitialized field in compounding pathSteve French1-0/+1
Ran into an intermittent crash in SMB2_open_init+0x2f6/0x970 due to oparms.cifs_sb not being initialized when called from: smb2_compound_op+0x45d/0x1690 Zero the whole oparms struct in the compounding path before setting up the oparms so we don't risk any uninitialized fields. Fixes: fdef665ba44a ("smb3: fix mode passed in on create for modetosid mount option") Signed-off-by: Steve French <[email protected]> Acked-by: Ronnie Sahlberg <[email protected]> Reviewed-by: Pavel Shilovsky <[email protected]>
2019-12-13Merge tag 'drm-fixes-5.5-2019-12-12' of ↵Dave Airlie27-118/+299
git://people.freedesktop.org/~agd5f/linux into drm-fixes drm-fixes-5.5-2019-12-12: amdgpu: - DC fixes for renoir - Gfx8 fence flush align with mesa - Power profile fix for arcturus - Freesync fix - DC I2c over aux fix - DC aux defer fix - GPU reset fix - GPUVM invalidation semaphore fixes for PCO and SR-IOV - Golden settings updates for gfx10 Signed-off-by: Dave Airlie <[email protected]> From: Alex Deucher <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-12-13Merge tag 'drm-intel-fixes-2019-12-12' of ↵Dave Airlie9-148/+177
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - Fix user reported issue #673: GPU hang on transition to idle - Avoid corruption on the top of the screen on GLK+ by disabling FBC - Fix non-privileged access to OA on Tigerlake - Fix HDCP code not to touch global state when just computing commit - Fix CI splat by saving irqstate around virtual_context_destroy - Serialise context retirement possibly on another CPU Signed-off-by: Dave Airlie <[email protected]> From: Joonas Lahtinen <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-12-13Merge tag 'drm-misc-next-fixes-2019-12-12' of ↵Dave Airlie7-41/+49
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes -mgag200: more startadd mitigation (Thomas) -panfrost: devfreq fix + several memory fixes (Steven, Boris) Cc: Boris Brezillon <[email protected]> Cc: Steven Price <[email protected]> Cc: Thomas Zimmermann <[email protected]> Signed-off-by: Dave Airlie <[email protected]> From: Sean Paul <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/20191212140145.GA145200@art_vandelay
2019-12-13drm/i915/gvt: Pin vgpu dma address before usingTina Zhang4-4/+99
Dma-buf display uses the vgpu dma address saved in the guest part GGTT table which is updated by vCPU thread. In host side, when the dma address is used by qemu ui thread, gvt-g must make sure the dma address is validated before letting it go to the HW. Invalid guest dma address will easily cause DMA fault and make GPU hang. v2: Rebase Fixes: e546e281d33d ("drm/i915/gvt: Dmabuf support for GVT-g") Acked-by: Zhenyu Wang <[email protected]> Signed-off-by: Tina Zhang <[email protected]> Signed-off-by: Zhenyu Wang <[email protected]> Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-12-13drm/i915/gvt: set guest display buffer as readonlyZhenyu Wang1-0/+1
We shouldn't allow write for exposed guest display buffer which doesn't make sense. So explicitly set read only flag for display dmabuf allocated object. Fixes: e546e281d33d ("drm/i915/gvt: Dmabuf support for GVT-g") Cc: Tina Zhang <[email protected]> Acked-by: Tina Zhang <[email protected]> Signed-off-by: Zhenyu Wang <[email protected]> Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-12-12Merge tag 'imx-clk-fixes-5.5' of ↵Stephen Boyd3-1/+4
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into clk-fixes Pull i.MX clk fixes from Shawn Guo: - Add missing lock to divider in the composite driver for exclusive register access - Add missing sentinel for ulp_div_table in clk-imx7ulp driver - Fix clk_pll14xx_wait_lock() function which calls into readl_poll_timeout() with incorrect parameter * tag 'imx-clk-fixes-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: clk: imx: pll14xx: fix clk_pll14xx_wait_lock clk: imx: clk-imx7ulp: Add missing sentinel of ulp_div_table clk: imx: clk-composite-8m: add lock to gate/mux
2019-12-12clk: walk orphan list on clock provider registrationJerome Brunet1-22/+40
So far, we walked the orphan list every time a new clock was registered in CCF. This was fine since the clocks were only referenced by name. Now that the clock can be referenced through DT, it is not enough: * Controller A register first a reference clocks from controller B through DT. * Controller B register all its clocks then register the provider. Each time controller B registers a new clock, the orphan list is walked but it can't match since the provider is registered yet. When the provider is finally registered, the orphan list is not walked unless another clock is registered afterward. This can lead to situation where some clocks remain orphaned even if the parent is available. Walking the orphan list on provider registration solves the problem. Reported-by: Jian Hu <[email protected]> Fixes: fc0c209c147f ("clk: Allow parents to be specified without string names") Signed-off-by: Jerome Brunet <[email protected]> Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Stephen Boyd <[email protected]>
2019-12-12of/platform: Unconditionally pause/resume sync state during kernel initSaravana Kannan1-3/+3
Commit 5e6669387e22 ("of/platform: Pause/resume sync state during init and of_platform_populate()") paused/resumed sync state during init only if Linux had parsed and populated a devicetree. However, the check for that (of_have_populated_dt()) can change after of_platform_default_populate_init() executes. One example of this is when devicetree unittests are enabled. This causes an unmatched pause/resume of sync state. To avoid this, just unconditionally pause/resume sync state during init. Fixes: 5e6669387e22 ("of/platform: Pause/resume sync state during init and of_platform_populate()") Reported-by: kernel test robot <[email protected]> Signed-off-by: Saravana Kannan <[email protected]> Reviewed-by: Frank Rowand <[email protected]> Signed-off-by: Rob Herring <[email protected]>
2019-12-12dt-bindings: memory-controllers: tegra: Fix type referencesRob Herring3-5/+10
Json-schema requires a $ref to be under an 'allOf' if there are additional constraints otherwise the additional constraints are ignored. (Note that this behavior will be changed in draft8.) Fixes: 641262f5e1ed ("dt-bindings: memory: Add binding for NVIDIA Tegra30 External Memory Controller") Fixes: 785685b7a106 ("dt-bindings: memory: Add binding for NVIDIA Tegra30 Memory Controller") Fixes: 8da65c377b21 ("dt-bindings: memory: tegra30: Convert to Tegra124 YAML") Cc: Thierry Reding <[email protected]> Cc: Jonathan Hunter <[email protected]> Cc: [email protected] Reviewed-by: Dmitry Osipenko <[email protected]> Signed-off-by: Rob Herring <[email protected]>
2019-12-12dt-bindings: Change maintainer addressMaxime Ripard44-44/+44
While my email address has changed for a while, all the schemas I contributed still have the old one unfortunately. Update it. Signed-off-by: Maxime Ripard <[email protected]> Signed-off-by: Rob Herring <[email protected]>
2019-12-12IB/mlx5: Fix device memory flowsYishai Hadas4-52/+105
Fix device memory flows so that only once there will be no live mmaped VA to a given allocation the matching object will be destroyed. This prevents a potential scenario that existing VA that was mmaped by one process might still be used post its deallocation despite that it's owned now by other process. The above is achieved by integrating with IB core APIs to manage mmap/munmap. Only once the refcount will become 0 the DM object and its underlay area will be freed. Fixes: 3b113a1ec3d4 ("IB/mlx5: Support device memory type attribute") Signed-off-by: Yishai Hadas <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Doug Ledford <[email protected]>
2019-12-12IB/core: Introduce rdma_user_mmap_entry_insert_range() APIYishai Hadas2-9/+44
Introduce rdma_user_mmap_entry_insert_range() API to be used once the required key for the given entry should be in a given range. Signed-off-by: Yishai Hadas <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Doug Ledford <[email protected]>
2019-12-12KEYS: asymmetric: return ENOMEM if akcipher_request_alloc() failsEric Biggers2-0/+2
No error code was being set on this error path. Cc: [email protected] Fixes: ad4b1eb5fb33 ("KEYS: asym_tpm: Implement encryption operation [ver #2]") Fixes: c08fed737126 ("KEYS: Implement encrypt, decrypt and sign for software asymmetric key [ver #2]") Reviewed-by: James Morris <[email protected]> Signed-off-by: Eric Biggers <[email protected]> Reviewed-by: Jarkko Sakkinen <[email protected]> Signed-off-by: Jarkko Sakkinen <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.