| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull fsnotify fix from Jan Kara:
"Fix possible softlockups on directories with many dentries in fsnotify
code"
* tag 'fsnotify_for_v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
fsnotify: clear PARENT_WATCHED flags lazily
|
|
Pull xfs updates from Chandan Babu:
"Major changes in this release are limited to enabling FITRIM on
realtime devices and Byte-based grant head log reservation tracking.
The remaining changes are limited to fixes and cleanups included in
this pull request.
Core:
- Enable FITRIM on the realtime device
- Introduce byte-based grant head log reservation tracking instead of
physical log location tracking.
This allows grant head to track a full 64 bit bytes space and hence
overcome the limit of 4GB indexing that has been present until now
Fixes:
- xfs_flush_unmap_range() and xfs_prepare_shift() should consider RT
extents in the flush unmap range
- Implement bounds check when traversing log operations during log
replay
- Prevent out of bounds access when traversing a directory data block
- Prevent incorrect ENOSPC when concurrently performing file creation
and file writes
- Fix rtalloc rotoring when delalloc is in use
Cleanups:
- Clean up I/O path inode locking helpers and the page fault handler
- xfs: hoist inode operations to libxfs in anticipation of the
metadata inode directory feature, which maintains a directory tree
of metadata inodes. This will be necessary for further enhancements
to the realtime feature, subvolume support
- Clean up some warts in the extent freeing log intent code
- Clean up the refcount and rmap intent code before adding support
for realtime devices
- Provide the correct email address for sysfs ABI documentation"
* tag 'xfs-6.11-merge-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (80 commits)
xfs: fix rtalloc rotoring when delalloc is in use
xfs: get rid of xfs_ag_resv_rmapbt_alloc
xfs: skip flushing log items during push
xfs: grant heads track byte counts, not LSNs
xfs: pass the full grant head to accounting functions
xfs: track log space pinned by the AIL
xfs: collapse xlog_state_set_callback in caller
xfs: l_last_sync_lsn is really AIL state
xfs: ensure log tail is always up to date
xfs: background AIL push should target physical space
xfs: AIL doesn't need manual pushing
xfs: move and rename xfs_trans_committed_bulk
xfs: fix the contact address for the sysfs ABI documentation
xfs: Avoid races with cnt_btree lastrec updates
xfs: move xfs_refcount_update_defer_add to xfs_refcount_item.c
xfs: simplify usage of the rcur local variable in xfs_refcount_finish_one
xfs: don't bother calling xfs_refcount_finish_one_cleanup in xfs_refcount_finish_one
xfs: reuse xfs_refcount_update_cancel_item
xfs: add a ci_entry helper
xfs: remove xfs_trans_set_refcount_flags
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat
Pull exfat updates from Namjae Jeon:
- Fix deadlock issue reported by syzbot
- Handle idmapped mounts
* tag 'exfat-for-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat:
exfat: fix potential deadlock on __exfat_get_dentry_set
exfat: handle idmapped mounts
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"The highlights are new logic behind background block group reclaim,
automatic removal of qgroup after removing a subvolume and new
'rescue=' mount options.
The rest is optimizations, cleanups and refactoring.
User visible features:
- dynamic block group reclaim:
- tunable framework to avoid situations where eager data
allocations prevent creating new metadata chunks due to lack of
unallocated space
- reuse sysfs knob bg_reclaim_threshold (otherwise used only in
zoned mode) for a fixed value threshold
- new on/off sysfs knob "dynamic_reclaim" calculating the value
based on heuristics, aiming to keep spare working space for
relocating chunks but not to needlessly relocate partially
utilized block groups or reclaim newly allocated ones
- stats are exported in sysfs per block group type, files
"reclaim_*"
- this may increase IO load at unexpected times but the corner
case of no allocatable block groups is known to be worse
- automatically remove qgroup of deleted subvolumes:
- adjust qgroup removal conditions, make sure all related
subvolume data are already removed, or return EBUSY, also take
into account setting of sysfs drop_subtree_threshold
- also works in squota mode
- mount option updates: new modes of 'rescue=' that allow to mount
images (read-only) that could have been partially converted by user
space tools
- ignoremetacsums - invalid metadata checksums are ignored
- ignoresuperflags - super block flags that track conversion in
progress (like UUID or checksums)
Core:
- size of struct btrfs_inode is now below 1024 (on a release config),
improved memory packing and other secondary effects
- switch tracking of open inodes from rb-tree to xarray, minor
performance improvement
- reduce number of empty transaction commits when there are no dirty
data/metadata
- memory allocation optimizations (reduced numbers, reordering out of
critical sections)
- extent map structure optimizations and refactoring, more sanity
checks
- more subpage in zoned mode preparations or fixes
- general snapshot code cleanups, improvements and documentation
- tree-checker updates: more file extent ram_bytes fixes, continued
- raid-stripe-tree update (not backward compatible):
- remove extent encoding field from the structure, can be inferred
from other information
- requires btrfs-progs 6.9.1 or newer
- cleanups and refactoring
- error message updates
- error handling improvements
- return type and parameter cleanups and improvements"
* tag 'for-6.11-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (152 commits)
btrfs: fix extent map use-after-free when adding pages to compressed bio
btrfs: fix bitmap leak when loading free space cache on duplicate entry
btrfs: remove the BUG_ON() inside extent_range_clear_dirty_for_io()
btrfs: move extent_range_clear_dirty_for_io() into inode.c
btrfs: enhance compression error messages
btrfs: fix data race when accessing the last_trans field of a root
btrfs: rename the extra_gfp parameter of btrfs_alloc_page_array()
btrfs: remove the extra_gfp parameter from btrfs_alloc_folio_array()
btrfs: introduce new "rescue=ignoresuperflags" mount option
btrfs: introduce new "rescue=ignoremetacsums" mount option
btrfs: output the unrecognized super block flags as hex
btrfs: remove unused Opt enums
btrfs: tree-checker: add extra ram_bytes and disk_num_bytes check
btrfs: fix the ram_bytes assignment for truncated ordered extents
btrfs: make validate_extent_map() catch ram_bytes mismatch
btrfs: ignore incorrect btrfs_file_extent_item::ram_bytes
btrfs: cleanup the bytenr usage inside btrfs_extent_item_to_extent_map()
btrfs: fix typo in error message in btrfs_validate_super()
btrfs: move the direct IO code into its own file
btrfs: pass a btrfs_inode to btrfs_set_prop()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 updates from Andreas Gruenbacher:
"Fixes and cleanups:
- Revise the glock reference counting model and LRU list handling to
be more sensible
- Several quota related fixes: clean up the quota code, add some
missing locking, and work around the on-disk corruption that the
reverted patch "gfs2: ignore negated quota changes" causes
- Clean up the glock demote logic in glock_work_func()"
* tag 'gfs2-v6.10-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: (29 commits)
gfs2: Clean up glock demote logic
gfs2: Revert "check for no eligible quota changes"
gfs2: Be more careful with the quota sync generation
gfs2: Get rid of some unnecessary quota locking
gfs2: Add some missing quota locking
gfs2: Fold qd_fish into gfs2_quota_sync
gfs2: quota need_sync cleanup
gfs2: Fix and clean up function do_qc
gfs2: Revert "Add quota_change type"
gfs2: Revert "ignore negated quota changes"
gfs2: qd_check_sync cleanups
gfs2: Revert "introduce qd_bh_get_or_undo"
gfs2: Check quota consistency on mount
gfs2: Minor gfs2_quota_init error path cleanup
gfs2: Get rid of demote_ok checks
Revert "GFS2: Don't add all glocks to the lru"
gfs2: Revise glock reference counting model
gfs2: Switch to a per-filesystem glock workqueue
gfs2: Report when glocks cannot be freed for a long time
gfs2: gfs2_glock_get cleanup
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm
Pull dlm updates from David Teigland:
- New flag DLM_LSFL_SOFTIRQ_SAFE can be set by code using dlm to
indicate callbacks can be run from softirq
- Change md-cluster to set DLM_LSFL_SOFTIRQ_SAFE
- Clean up for previous changes, e.g. unused code and parameters
- Remove custom pre-allocation of rsb structs which is unnecessary with
kmem caches
- Change idr to xarray for lkb structs in use
- Change idr to xarray for rsb structs being recovered
- Change outdated naming related to internal rsb states
- Fix some incorrect add/remove of rsb on scan list
- Use rcu to free rsb structs
* tag 'dlm-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm:
dlm: add rcu_barrier before destroy kmem cache
dlm: remove DLM_LSFL_SOFTIRQ from exflags
fs: dlm: remove unused struct 'dlm_processed_nodes'
md-cluster: use DLM_LSFL_SOFTIRQ for dlm_new_lockspace()
dlm: implement LSFL_SOFTIRQ_SAFE
dlm: introduce DLM_LSFL_SOFTIRQ_SAFE
dlm: use LSFL_FS to check for kernel lockspace
dlm: use rcu to avoid an extra rsb struct lookup
dlm: fix add_scan and del_scan usage
dlm: change list and timer names
dlm: move recover idr to xarray datastructure
dlm: move lkb idr to xarray datastructure
dlm: drop own rsb pre allocation mechanism
dlm: remove ls_local_handle from struct dlm_ls
dlm: remove unused parameter in dlm_midcomms_addr
dlm: don't kref_init rsbs created for toss list
dlm: remove scand leftovers
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs updates from Gao Xiang:
"Updates for folio conversions for compressed inodes: While large folio
support for compressed data could work now, it remains disabled since
the stress test could hang due to page migration in a few hours after
enabling it. I need more time to investigate further before enabling
this feature.
Additionally, clean up stream decompressors and tracepoints for
simplicity.
Summary:
- More folio conversions for compressed inodes
- Stream decompressor (LZMA/DEFLATE/ZSTD) cleanups
- Minor tracepoint cleanup"
* tag 'erofs-for-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: silence uninitialized variable warning in z_erofs_scan_folio()
erofs: avoid refcounting short-lived pages
erofs: get rid of z_erofs_map_blocks_iter_* tracepoints
erofs: tidy up stream decompressors
erofs: refine z_erofs_{init,exit}_subsystem()
erofs: move each decompressor to its own source file
erofs: tidy up `struct z_erofs_bvec`
erofs: teach z_erofs_scan_folios() to handle multi-page folios
erofs: convert z_erofs_read_fragment() to folios
erofs: convert z_erofs_pcluster_readmore() to folios
|
|
Pull nfsd updates from Chuck Lever:
"This is a light release containing optimizations, code clean-ups, and
minor bug fixes.
This development cycle focused on work outside of upstream kernel
development:
- Continuing to build upstream CI for NFSD based on kdevops
- Continuing to focus on the quality of NFSD in LTS kernels
- Participation in IETF nfsv4 WG discussions about NFSv4 ACLs,
directory delegation, and NFSv4.2 COPY offload
Notable features for v6.11 that do not come through the NFSD tree
include NFS server-side support for the new pNFS NVMe layout type
[RFC9561]. Functional testing for pNFS block layouts like this one has
been introduced to our kdevops CI harness. Work on improving the
resolution of file attribute time stamps in local filesystems is also
ongoing tree-wide.
As always I am grateful to NFSD contributors, reviewers, testers, and
bug reporters who participated during this cycle"
* tag 'nfsd-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
nfsd: nfsd_file_lease_notifier_call gets a file_lease as an argument
gss_krb5: Fix the error handling path for crypto_sync_skcipher_setkey
MAINTAINERS: Add a bugzilla link for NFSD
nfsd: new netlink ops to get/set server pool_mode
sunrpc: refactor pool_mode setting code
nfsd: allow passing in array of thread counts via netlink
nfsd: make nfsd_svc take an array of thread counts
sunrpc: fix up the special handling of sv_nrpools == 1
SUNRPC: Add a trace point in svc_xprt_deferred_close
NFSD: Support write delegations in LAYOUTGET
lockd: Use *-y instead of *-objs in Makefile
NFSD: Fix nfsdcld warning
svcrdma: Handle ADDR_CHANGE CM event properly
svcrdma: Refactor the creation of listener CMA ID
NFSD: remove unused structs 'nfsd3_voidargs'
NFSD: harden svcxdr_dupstr() and svcxdr_tmpalloc() against integer overflows
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull affs updates from David Sterba:
- conversions of one-element arrays to flexible arrays
* tag 'affs-6.11-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
affs: struct slink_front: Replace 1-element array with flexible array
affs: struct affs_data_head: Replace 1-element array with flexible array
affs: struct affs_head: Replace 1-element array with flexible array
|
|
Since commit 1fffe7a34c89 ("script: modpost: emit a warning when the
description is missing"), a module without a MODULE_DESCRIPTION() will
result in a warning with make W=1. The following warnings are being
observed in samples/vfio-mdev:
WARNING: modpost: missing MODULE_DESCRIPTION() in samples/vfio-mdev/mtty.o
WARNING: modpost: missing MODULE_DESCRIPTION() in samples/vfio-mdev/mdpy.o
WARNING: modpost: missing MODULE_DESCRIPTION() in samples/vfio-mdev/mdpy-fb.o
WARNING: modpost: missing MODULE_DESCRIPTION() in samples/vfio-mdev/mbochs.o
Add the missing invocations of the MODULE_DESCRIPTION() macro to these
modules. And in the case of mtty.c, remove the now redundant instance
of the MODULE_INFO() macro.
Signed-off-by: Jeff Johnson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alex Williamson <[email protected]>
|
|
Hari Bathini has been updating and maintaining the powerpc BPF JIT since
a while now. Christophe Leroy has been doing the same for 32-bit
powerpc. Add them as maintainers for the powerpc BPF JIT.
I am no longer actively looking into the powerpc BPF JIT. Change my role
to that of a reviewer so that I can help with the odd query.
Signed-off-by: Naveen N Rao <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Reviewed-by: Masami Hiramatsu (Google) <[email protected]>
Acked-by: Christophe Leroy <[email protected]>
Acked-by: Hari Bathini <[email protected]>
Link: https://lore.kernel.org/bpf/24fea21d9d4458973aadd6a02bb1bf558b8bd0b2.1720944897.git.naveen@kernel.org
|
|
I have switched to using my @kernel.org id for my contributions. Update
MAINTAINERS and mailmap to reflect the same.
Signed-off-by: Naveen N Rao <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Reviewed-by: Masami Hiramatsu (Google) <[email protected]>
Link: https://lore.kernel.org/bpf/fb6ef126771c70538067709af69d960da3560ce7.1720944897.git.naveen@kernel.org
|
|
On ARM64 the stack pointer should be aligned at a 16 byte boundary or
the SPAlignmentFault can occur. The fexit_sleep selftest allocates the
stack for the child process as a character array, this is not guaranteed
to be aligned at 16 bytes.
Because of the SPAlignmentFault, the child process is killed before it
can do the nanosleep call and hence fentry_cnt remains as 0. This causes
the main thread to hang on the following line:
while (READ_ONCE(fexit_skel->bss->fentry_cnt) != 2);
Fix this by allocating the stack using mmap() as described in the
example in the man page of clone().
Remove the fexit_sleep test from the DENYLIST of arm64.
Fixes: eddbe8e65214 ("selftest/bpf: Add a test to check trampoline freeing logic.")
Signed-off-by: Puranjay Mohan <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
nfs_read_folio is a bit hard to follow because it mixes highlevel logic
with the actual data read. Split the latter into a helper and update
the comments to be more accurate.
Signed-off-by: Christoph Hellwig <[email protected]>
Signed-off-by: Anna Schumaker <[email protected]>
|
|
nfs_folio_length is unsafe to use without having the folio locked and a
check for a NULL ->f_mapping that protects against truncations and can
lead to kernel crashes. E.g. when running xfstests generic/065 with
all nfs trace points enabled.
Follow the model of the XFS trace points and pass in an explіcit offset
and length. This has the additional benefit that these values can
be more accurate as some of the users touch partial folio ranges.
Fixes: eb5654b3b89d ("NFS: Enable tracing of nfs_invalidate_folio() and nfs_launder_folio()")
Reported-by: Chuck Lever <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
Signed-off-by: Anna Schumaker <[email protected]>
|
|
Without 'netfilter: nf_set_pipapo: fix initial map fill' this fails:
TEST: reported issues
Add two elements, flush, re-add 1s [ OK ]
net,mac with reload 1s [ OK ]
net,port,proto 1s [FAIL]
post-add: should have returned 10.5.8.0/24 . 51-60 . 6-17 but got table inet filter {
set test {
type ipv4_addr . inet_service . inet_proto
flags interval,timeout
elements = { 10.5.7.0/24 . 51-60 . 6-17 }
}
}
The other sets defined in the selftest do not trigger this bug, it only
occurs if the first field group bitsize is smaller than the largest
group bitsize.
For each added element, check 'get' works and actually returns the
requested range.
After map has been filled, check all added ranges can still be
retrieved.
For each deleted element, check that 'get' fails.
Based on a reproducer script from Yi Chen.
Signed-off-by: Florian Westphal <[email protected]>
Reviewed-by: Stefano Brivio <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
|
|
The initial buffer has to be inited to all-ones, but it must restrict
it to the size of the first field, not the total field size.
After each round in the map search step, the result and the fill map
are swapped, so if we have a set where f->bsize of the first element
is smaller than m->bsize_max, those one-bits are leaked into future
rounds result map.
This makes pipapo find an incorrect matching results for sets where
first field size is not the largest.
Followup patch adds a test case to nft_concat_range.sh selftest script.
Thanks to Stefano Brivio for pointing out that we need to zero out
the remainder explicitly, only correcting memset() argument isn't enough.
Fixes: 3c4287f62044 ("nf_tables: Add set type for arbitrary concatenation of ranges")
Reported-by: Yi Chen <[email protected]>
Cc: Stefano Brivio <[email protected]>
Signed-off-by: Florian Westphal <[email protected]>
Reviewed-by: Stefano Brivio <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
|
|
Delete expectation path is missing a call to the nf_expect_get_id()
helper function to calculate the expectation ID, otherwise LSB of the
expectation object address is leaked to userspace.
Fixes: 3c79107631db ("netfilter: ctnetlink: don't use conntrack/expect object addresses as id")
Reported-by: [email protected]
Signed-off-by: Pablo Neira Ayuso <[email protected]>
|
|
When requesting an attestation report a guest is able to specify whether
it wants SNP firmware to sign the report using either a Versioned Chip
Endorsement Key (VCEK), which is derived from chip-unique secrets, or a
Versioned Loaded Endorsement Key (VLEK) which is obtained from an AMD
Key Derivation Service (KDS) and derived from seeds allocated to
enrolled cloud service providers (CSPs).
For VLEK keys, an SNP_VLEK_LOAD SNP firmware command is used to load
them into the system after obtaining them from the KDS. Add a
corresponding userspace interface so to allow the loading of VLEK keys
into the system.
See SEV-SNP Firmware ABI 1.54, SNP_VLEK_LOAD for more details.
Reviewed-by: Tom Lendacky <[email protected]>
Signed-off-by: Michael Roth <[email protected]>
Message-ID: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Gone but never forgotten.
[ Also moved Daniel's name to be consistent with the alphabetical order ]
Cc: Mark Rutland <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Juri Lelli <[email protected]>
Cc: Kate Stewart <[email protected]>
Cc: Clark Williams <[email protected]>
Cc: "Luis Claudio R. Goncalves" <[email protected]>
Cc: John Kacur <[email protected]>
Signed-off-by: Steven Rostedt (Google) <[email protected]>
Link: https://lore.kernel.org/[email protected]
Reviewed-by: Mathieu Desnoyers <[email protected]>
Reviewed-by: Masami Hiramatsu (Google) <[email protected]>
|
|
We may end up calling pwrseq_target_free() on a partially initialized
target object whose unit is either NULL or an ERR_PTR(). Avoid
dereferencing invalid memory by adding an appropriate check to
pwrseq_target_free().
Fixes: 249ebf3f65f8 ("power: sequencing: implement the pwrseq core")
Reported-by: Dan Carpenter <[email protected]>
Closes: https://lore.kernel.org/linux-pm/[email protected]/
Reviewed-by: Dan Carpenter <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bartosz Golaszewski <[email protected]>
|
|
Building the fbnic nn s390, yield a build bug:
In function ‘fbnic_config_drop_mode_rcq’,
inlined from ‘fbnic_enable’ at drivers/net/ethernet/meta/fbnic/fbnic_txrx.c:1836:4:
././include/linux/compiler_types.h:510:45: error: call to ‘__compiletime_assert_919’ declared with attribute error: FIELD_PREP: value too large for the field
The relevant mask is 9 bits wide, and the related value is the cacheline
aligned size of struct skb_shared_info.
On s390 the cacheline size is 256 bytes, and skb_shared_info minimum
size on 64 bits system is 320 bytes.
Avoid building the driver for such arch.
Reported-by: kernel test robot <[email protected]>
Link: https://lore.kernel.org/[email protected]/
Reported-by: Nathan Chancellor <[email protected]>
Fixes: 0cb4c0a13723 ("eth: fbnic: Implement Rx queue alloc/start/stop/free")
Signed-off-by: Paolo Abeni <[email protected]>
Link: https://patch.msgid.link/5dfefd3e90e77828f38e68854b171a5b8b8c6ede.1721215379.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
There is no support for HWPOISON, MEMORY_FAILURE, or ARCH_HAS_COPY_MC on
s390. Therefore we do not expect to see VM_FAULT_HWPOISON in
do_exception().
However, since commit af19487f00f3 ("mm: make PTE_MARKER_SWAPIN_ERROR more
general"), it is possible to see VM_FAULT_HWPOISON in combination with
PTE_MARKER_POISONED, even on architectures that do not support HWPOISON
otherwise. In this case, we will end up on the BUG() in do_exception().
Fix this by treating VM_FAULT_HWPOISON the same as VM_FAULT_SIGBUS, similar
to x86 when MEMORY_FAILURE is not configured. Also print unexpected fault
flags, for easier debugging.
Note that VM_FAULT_HWPOISON_LARGE is not expected, because s390 cannot
support swap entries on other levels than PTE level.
Cc: [email protected] # 6.6+
Fixes: af19487f00f3 ("mm: make PTE_MARKER_SWAPIN_ERROR more general")
Reported-by: Yunseong Kim <[email protected]>
Tested-by: Yunseong Kim <[email protected]>
Acked-by: Alexander Gordeev <[email protected]>
Signed-off-by: Gerald Schaefer <[email protected]>
Message-ID: <[email protected]>
Signed-off-by: Vasily Gorbik <[email protected]>
|
|
Add new vendor_id and subsystem_id in quirk for Lenovo Hera2 Laptop.
Signed-off-by: Shenghao Ding <[email protected]>
Cc: <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
Since the original virtio_find_vqs() is no longer present, rename
virtio_find_vqs_info() back to virtio_find_vqs().
Signed-off-by: Jiri Pirko <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
|
|
All callers of virtio_find_vqs() and virtio_find_vqs_ctx() were
converted to use virtio_find_vqs_info(). Remove no longer used helpers.
Signed-off-by: Jiri Pirko <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
|
|
Instead of passing separate names and callbacks arrays
to virtio_find_vqs(), have one of virtual_queue_info structs and
pass it to virtio_find_vqs_info().
Suggested-by: Xuan Zhuo <[email protected]>
Signed-off-by: Jiri Pirko <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
|
|
Instead of passing separate names and callbacks arrays
to virtio_find_vqs(), have one of virtual_queue_info structs and
pass it to virtio_find_vqs_info().
Suggested-by: Xuan Zhuo <[email protected]>
Signed-off-by: Jiri Pirko <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
|
|
Instead of passing separate names and callbacks arrays
to virtio_find_vqs(), allocate one of virtual_queue_info structs and
pass it to virtio_find_vqs_info().
Suggested-by: Xuan Zhuo <[email protected]>
Signed-off-by: Jiri Pirko <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
|
|
Instead of passing separate names and callbacks arrays
to virtio_find_vqs(), allocate one of virtual_queue_info structs and
pass it to virtio_find_vqs_info().
Suggested-by: Xuan Zhuo <[email protected]>
Signed-off-by: Jiri Pirko <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
|
|
Instead of passing separate names and callbacks arrays
to virtio_find_vqs_ctx(), allocate one of virtual_queue_info structs
and pass it to virtio_find_vqs_info().
Suggested-by: Xuan Zhuo <[email protected]>
Signed-off-by: Jiri Pirko <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
|
|
Instead of passing separate names and callbacks arrays
to virtio_find_vqs(), allocate one of virtual_queue_info structs and
pass it to virtio_find_vqs_info().
Suggested-by: Xuan Zhuo <[email protected]>
Signed-off-by: Jiri Pirko <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
|
|
Instead of passing separate names and callbacks arrays
to virtio_find_vqs(), allocate one of virtual_queue_info structs and
pass it to virtio_find_vqs_info().
Suggested-by: Xuan Zhuo <[email protected]>
Signed-off-by: Jiri Pirko <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
|
|
Instead of passing separate names and callbacks arrays
to virtio_find_vqs(), allocate one of virtual_queue_info structs and
pass it to virtio_find_vqs_info().
Suggested-by: Xuan Zhuo <[email protected]>
Signed-off-by: Jiri Pirko <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
|
|
Since the original find_vqs() is no longer present, rename
find_vqs_info() back to find_vqs().
Signed-off-by: Jiri Pirko <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
|
|
As it is no longer used, remove it.
Signed-off-by: Jiri Pirko <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
|
|
Since there are no more implementations of find_vqs() op, call
virtio_find_vqs_info() from virtio_find_single_vq() directly.
Signed-off-by: Jiri Pirko <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
|
|
Convert existing find_vqs() transport implementations
to use find_vqs_info() config op.
Signed-off-by: Jiri Pirko <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
|
|
Convert existing vp_find_vqs() and vp_modern_find_vqs() implementations
to find_vqs_info() config op.
Signed-off-by: Jiri Pirko <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
|
|
Introduce a structure virtio_queue_info to carry name, callback and ctx
together. In order to allow config implementations to accept config op
with array of virtio_queue_info structures, introduce a new
find_vqs_info() op. Do the needed conversion in virtio_find_vqs_ctx().
Note that whole virtio_find_vqs_ctx() is going to be eventually removed
at the and of this patchset.
Suggested-by: Xuan Zhuo <[email protected]>
Signed-off-by: Jiri Pirko <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
|
|
In order to prepare for conversion of virtio_find_vqs*() arguments, make
virtio_find_single_vq() to call virtio_find_vqs() instead of
op directly.
Signed-off-by: Jiri Pirko <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
|
|
In order to prepare for conversion of virtio_find_vqs*() arguments, make
virtio_find_vqs() to call virtio_find_vqs_ctx() instead of op directly.
Signed-off-by: Jiri Pirko <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
|
|
Since caif uses only one queue, convert to virtio_find_single_vq()
helper which is made for this purpose.
Signed-off-by: Jiri Pirko <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
|
|
LoongArch architecture changes for 6.11 depend on the asm-generic
changes to avoid confliction, so merge them to create a base.
|
|
When the UMP Endpoint is configured with static blocks, the block
configuration will never change, hence the unused ports will be
unchanged as well. Creating sequencer ports for those unused ports
is simply useless, and it might be rather confusing for users.
The idea behind the inactive ports was for allowing connections
from/to ports that can become usable later, but this will never
happen for inactive groups in static blocks.
Let's change the sequencer UMP binding to skip those unused ports when
the UMP EP is with static blocks.
Fixes: 81fd444aa371 ("ALSA: seq: Bind UMP device")
Cc: <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
When suspended, the DMA channel may enter PAUSE state if dmaengine_pause()
is supported by DMA.
At this state, dmaengine_synchronize() should not be called, otherwise
the DMA channel can't be resumed successfully.
Fixes: e8343410ddf0 ("ALSA: dmaengine: Synchronize dma channel after drop()")
Signed-off-by: Shengjiu Wang <[email protected]>
Cc: <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
The dma_request_chan() returns error pointer in case of error, while
dma_request_channel() returns NULL in case of error therefore different
error checks are needed for the two.
Fixes: 7326d3fb1ee3 ("mtd: rawnand: lpx32xx: Request DMA channels using DT entries")
Signed-off-by: Piotr Wojtaszczyk <[email protected]>
Cc: [email protected]
Signed-off-by: Miquel Raynal <[email protected]>
Link: https://lore.kernel.org/linux-mtd/[email protected]
|
|
MX35{U,L}F{2,4}G24AD-Z4I8 are Macronix serial NAND flashes.
Their main difference from MX35{U,L}F{2,4}G24AD lies in
the plane number. The plane number for those with the
postfix Z4I8 is 1.
These flashes have been validated on Xilinx zynq-picozed
board which include Macronix SPI Host.
Signed-off-by: Cheng Ming Lin <[email protected]>
Signed-off-by: Miquel Raynal <[email protected]>
Link: https://lore.kernel.org/linux-mtd/[email protected]
|
|
Adding the Device ID 2 on Macronix serial NAND flash.
When the number of flashes increases, we need to utilize
Device ID 2 to distinguish between different flashes.
These flashes have been validated on Xilinx zynq-picozed
board which included Macronix SPI Host.
Signed-off-by: Cheng Ming Lin <[email protected]>
Signed-off-by: Miquel Raynal <[email protected]>
Link: https://lore.kernel.org/linux-mtd/[email protected]
|
|
Move away from pl08x platform data towards device tree.
Signed-off-by: Piotr Wojtaszczyk <[email protected]>
Signed-off-by: Miquel Raynal <[email protected]>
Link: https://lore.kernel.org/linux-mtd/[email protected]
|