aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2019-06-25block, bfq: fix operator in BFQQ_TOTALLY_SEEKYPaolo Valente1-1/+1
By mistake, there is a '&' instead of a '==' in the definition of the macro BFQQ_TOTALLY_SEEKY. This commit replaces the wrong operator with the correct one. Fixes: 7074f076ff15 ("block, bfq: do not tag totally seeky queues as soft rt") Signed-off-by: Paolo Valente <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2019-06-25dm init: fix incorrect uses of kstrndup()Gen Zhang1-3/+3
Fix 2 kstrndup() calls with incorrect argument order. Fixes: 6bbc923dfcf5 ("dm: add support to directly boot to a mapped device") Cc: [email protected] # v5.1 Signed-off-by: Gen Zhang <[email protected]> Signed-off-by: Mike Snitzer <[email protected]>
2019-06-25pinctrl: ocelot: fix pinmuxing for pins after 31Alexandre Belloni1-7/+9
The actual layout for OCELOT_GPIO_ALT[01] when there are more than 32 pins is interleaved, i.e. OCELOT_GPIO_ALT0[0], OCELOT_GPIO_ALT1[0], OCELOT_GPIO_ALT0[1], OCELOT_GPIO_ALT1[1]. Introduce a new REG_ALT macro to facilitate the register offset calculation and use it where necessary. Fixes: da801ab56ad8 pinctrl: ocelot: add MSCC Jaguar2 support Signed-off-by: Alexandre Belloni <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
2019-06-25pinctrl: ocelot: fix gpio direction for pins after 31Alexandre Belloni1-1/+1
The third argument passed to REG is not the correct one and ocelot_gpio_set_direction is not working for pins after 31. Fix that by passing the pin number instead of the modulo 32 value. Fixes: da801ab56ad8 pinctrl: ocelot: add MSCC Jaguar2 support Signed-off-by: Alexandre Belloni <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
2019-06-25pinctrl: mcp23s08: Fix add_data and irqchip_add_nested call orderPhil Reid1-4/+4
Currently probing of the mcp23s08 results in an error message "detected irqchip that is shared with multiple gpiochips: please fix the driver" This is due to the following: Call to mcp23s08_irqchip_setup() with call hierarchy: mcp23s08_irqchip_setup() gpiochip_irqchip_add_nested() gpiochip_irqchip_add_key() gpiochip_set_irq_hooks() Call to devm_gpiochip_add_data() with call hierarchy: devm_gpiochip_add_data() gpiochip_add_data_with_key() gpiochip_add_irqchip() gpiochip_set_irq_hooks() The gpiochip_add_irqchip() returns immediately if there isn't a irqchip but we added a irqchip due to the previous mcp23s08_irqchip_setup() call. So it calls gpiochip_set_irq_hooks() a second time. Fix this by moving the call to devm_gpiochip_add_data before the call to mcp23s08_irqchip_setup Fixes: 02e389e63e35 ("pinctrl: mcp23s08: fix irq setup order") Suggested-by: Marco Felsch <[email protected]> Signed-off-by: Phil Reid <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
2019-06-25ALSA: hda/realtek: Add quirks for several Clevo notebook barebonesRichard Sailer1-3/+4
This adds 4 SND_PCI_QUIRK(...) lines for several barebone models of the ODM Clevo. The model names are written in regex syntax to describe/match all clevo models that are similar enough and use the same PCI SSID that this fixup works for them. Additionally the lines regarding SSID 0x96e1 and 0x97e1 didn't fix audio for the all our Clevo notebooks using these SSIDs (models Clevo P960* and P970*) since ALC1220_FIXP_CLEVO_PB51ED_PINS swapped pins that are not necesarry to be swapped. This patch initiates ALC1220_FIXUP_CLEVO_P950 instead for these model and fixes the audio. Fixes: 80690a276f44 ("ALSA: hda/realtek - Add quirk for Tuxedo XC 1509") Signed-off-by: Richard Sailer <[email protected]> Cc: <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2019-06-25Merge tag 'imx-fixes-5.2-3' of ↵Olof Johansson1-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 5.2, round 3: - A recent testing by Sébastien discovers that the PWM interrupts of i.MX6UL were wrongly coded in device tree. It's a fix for it. * tag 'imx-fixes-5.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: imx6ul: fix PWM[1-4] interrupts Signed-off-by: Olof Johansson <[email protected]>
2019-06-25Merge tag 'amlogic-fixes' of ↵Olof Johansson2-9/+7
https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/fixes ARM: dts: Amlogic fixes for v5.2-rc - fix GPU interrupts and operating voltage * tag 'amlogic-fixes' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: ARM: dts: meson8b: fix the operating voltage of the Mali GPU ARM: dts: meson8b: drop undocumented property from the Mali GPU node ARM: dts: meson8: fix GPU interrupts and drop an undocumented property Signed-off-by: Olof Johansson <[email protected]>
2019-06-25powerpc/64s/exception: Fix machine check early corrupting AMRNicholas Piggin1-1/+1
The early machine check runs in real mode, so locking is unnecessary. Worse, the windup does not restore AMR, so this can result in a false KUAP fault after a recoverable machine check hits inside a user copy operation. Fix this similarly to HMI by just avoiding the kuap lock in the early machine check handler (it will be set by the late handler that runs in virtual mode if that runs). If the virtual mode handler is reached, it will lock and restore the AMR. Fixes: 890274c2dc4c0 ("powerpc/64s: Implement KUAP for Radix MMU") Cc: Russell Currey <[email protected]> Signed-off-by: Nicholas Piggin <[email protected]> Signed-off-by: Michael Ellerman <[email protected]>
2019-06-25Merge branch 'parisc-5.2-4' of ↵Linus Torvalds1-0/+4
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc fix from Helge Deller: "Add missing PCREL64 relocation in module loader to fix module load errors when the static branch and JUMP_LABEL feature is enabled on a 64-bit kernel" * 'parisc-5.2-4' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Fix module loading error with JUMP_LABEL feature
2019-06-24MAINTAINERS: Correct path to moved filesPaul Cercueil1-1/+1
The driver was moved in commit 1838a7b31fcb ("mtd: rawnand: Move drivers for Ingenic SoCs to subfolder"). Signed-off-by: Paul Cercueil <[email protected]> Signed-off-by: Paul Burton <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> Cc: [email protected] Cc: [email protected]
2019-06-24MIPS: Add missing EHB in mtc0 -> mfc0 sequence.Dmitry Korotin1-9/+20
Add a missing EHB (Execution Hazard Barrier) in mtc0 -> mfc0 sequence. Without this execution hazard barrier it's possible for the value read back from the KScratch register to be the value from before the mtc0. Reproducible on P5600 & P6600. The hazard is documented in the MIPS Architecture Reference Manual Vol. III: MIPS32/microMIPS32 Privileged Resource Architecture (MD00088), rev 6.03 table 8.1 which includes: Producer | Consumer | Hazard ----------|----------|---------------------------- mtc0 | mfc0 | any coprocessor 0 register Signed-off-by: Dmitry Korotin <[email protected]> [[email protected]: - Commit message tweaks. - Add Fixes tags. - Mark for stable back to v3.15 where P5600 support was introduced.] Signed-off-by: Paul Burton <[email protected]> Fixes: 3d8bfdd03072 ("MIPS: Use C0_KScratch (if present) to hold PGD pointer.") Fixes: 829dcc0a956a ("MIPS: Add MIPS P5600 probe support") Cc: [email protected] Cc: [email protected] # v3.15+
2019-06-25Merge tag 'mfd-fixes-5.2-1' of ↵Linus Torvalds1-6/+6
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull mfd bugfix from Lee Jones. Fix stmfx type confusion between regmap_read() (which takes an "u32") and the bitmap operations (which take an "unsigned long" array). * tag 'mfd-fixes-5.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: mfd: stmfx: Fix an endian bug in stmfx_irq_handler() mfd: stmfx: Uninitialized variable in stmfx_irq_handler()
2019-06-24perf/x86/regs: Use PERF_REG_EXTENDED_MASKKan Liang3-3/+5
Use the macro defined in kernel ABI header to replace the local name. No functional change. Signed-off-by: Kan Liang <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Arnaldo Carvalho de Melo <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Vince Weaver <[email protected]> Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
2019-06-24perf/x86: Remove pmu->pebs_no_xmm_regsKan Liang3-7/+4
We don't need pmu->pebs_no_xmm_regs anymore, the capabilities PERF_PMU_CAP_EXTENDED_REGS can be used to check if XMM registers collection is supported. Signed-off-by: Kan Liang <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Arnaldo Carvalho de Melo <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Vince Weaver <[email protected]> Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
2019-06-24perf/x86: Clean up PEBS_XMM_REGSKan Liang3-21/+3
Use generic macro PERF_REG_EXTENDED_MASK to replace PEBS_XMM_REGS to avoid duplication. Signed-off-by: Kan Liang <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Arnaldo Carvalho de Melo <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Vince Weaver <[email protected]> Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
2019-06-24perf/x86/regs: Check reserved bitsKan Liang1-2/+5
The perf fuzzer triggers a warning which map to: if (WARN_ON_ONCE(idx >= ARRAY_SIZE(pt_regs_offset))) return 0; The bits between XMM registers and generic registers are reserved. But perf_reg_validate() doesn't check these bits. Add PERF_REG_X86_RESERVED for reserved bits on X86. Check the reserved bits in perf_reg_validate(). Reported-by: Vince Weaver <[email protected]> Signed-off-by: Kan Liang <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Arnaldo Carvalho de Melo <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Cc: Thomas Gleixner <[email protected]> Fixes: 878068ea270e ("perf/x86: Support outputting XMM registers") Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
2019-06-24perf/x86: Disable extended registers for non-supported PMUsKan Liang5-4/+27
The perf fuzzer caused Skylake machine to crash: [ 9680.085831] Call Trace: [ 9680.088301] <IRQ> [ 9680.090363] perf_output_sample_regs+0x43/0xa0 [ 9680.094928] perf_output_sample+0x3aa/0x7a0 [ 9680.099181] perf_event_output_forward+0x53/0x80 [ 9680.103917] __perf_event_overflow+0x52/0xf0 [ 9680.108266] ? perf_trace_run_bpf_submit+0xc0/0xc0 [ 9680.113108] perf_swevent_hrtimer+0xe2/0x150 [ 9680.117475] ? check_preempt_wakeup+0x181/0x230 [ 9680.122091] ? check_preempt_curr+0x62/0x90 [ 9680.126361] ? ttwu_do_wakeup+0x19/0x140 [ 9680.130355] ? try_to_wake_up+0x54/0x460 [ 9680.134366] ? reweight_entity+0x15b/0x1a0 [ 9680.138559] ? __queue_work+0x103/0x3f0 [ 9680.142472] ? update_dl_rq_load_avg+0x1cd/0x270 [ 9680.147194] ? timerqueue_del+0x1e/0x40 [ 9680.151092] ? __remove_hrtimer+0x35/0x70 [ 9680.155191] __hrtimer_run_queues+0x100/0x280 [ 9680.159658] hrtimer_interrupt+0x100/0x220 [ 9680.163835] smp_apic_timer_interrupt+0x6a/0x140 [ 9680.168555] apic_timer_interrupt+0xf/0x20 [ 9680.172756] </IRQ> The XMM registers can only be collected by PEBS hardware events on the platforms with PEBS baseline support, e.g. Icelake, not software/probe events. Add capabilities flag PERF_PMU_CAP_EXTENDED_REGS to indicate the PMU which support extended registers. For X86, the extended registers are XMM registers. Add has_extended_regs() to check if extended registers are applied. The generic code define the mask of extended registers as 0 if arch headers haven't overridden it. Originally-by: Peter Zijlstra (Intel) <[email protected]> Reported-by: Vince Weaver <[email protected]> Signed-off-by: Kan Liang <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Arnaldo Carvalho de Melo <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Cc: Thomas Gleixner <[email protected]> Fixes: 878068ea270e ("perf/x86: Support outputting XMM registers") Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
2019-06-24perf/ioctl: Add check for the sample_period valueRavi Bangoria1-0/+3
perf_event_open() limits the sample_period to 63 bits. See: 0819b2e30ccb ("perf: Limit perf_event_attr::sample_period to 63 bits") Make ioctl() consistent with it. Also on PowerPC, negative sample_period could cause a recursive PMIs leading to a hang (reported when running perf-fuzzer). Signed-off-by: Ravi Bangoria <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Arnaldo Carvalho de Melo <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Vince Weaver <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Fixes: 0819b2e30ccb ("perf: Limit perf_event_attr::sample_period to 63 bits") Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
2019-06-24qmi_wwan: Fix out-of-bounds readBjørn Mork1-1/+1
The syzbot reported Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xca/0x13e lib/dump_stack.c:113 print_address_description+0x67/0x231 mm/kasan/report.c:188 __kasan_report.cold+0x1a/0x32 mm/kasan/report.c:317 kasan_report+0xe/0x20 mm/kasan/common.c:614 qmi_wwan_probe+0x342/0x360 drivers/net/usb/qmi_wwan.c:1417 usb_probe_interface+0x305/0x7a0 drivers/usb/core/driver.c:361 really_probe+0x281/0x660 drivers/base/dd.c:509 driver_probe_device+0x104/0x210 drivers/base/dd.c:670 __device_attach_driver+0x1c2/0x220 drivers/base/dd.c:777 bus_for_each_drv+0x15c/0x1e0 drivers/base/bus.c:454 Caused by too many confusing indirections and casts. id->driver_info is a pointer stored in a long. We want the pointer here, not the address of it. Thanks-to: Hillf Danton <[email protected]> Reported-by: [email protected] Cc: Kristian Evensen <[email protected]> Fixes: e4bf63482c30 ("qmi_wwan: Add quirk for Quectel dynamic config") Signed-off-by: Bjørn Mork <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-06-24tipc: check msg->req data len in tipc_nl_compat_bearer_disableXin Long1-3/+15
This patch is to fix an uninit-value issue, reported by syzbot: BUG: KMSAN: uninit-value in memchr+0xce/0x110 lib/string.c:981 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x191/0x1f0 lib/dump_stack.c:113 kmsan_report+0x130/0x2a0 mm/kmsan/kmsan.c:622 __msan_warning+0x75/0xe0 mm/kmsan/kmsan_instr.c:310 memchr+0xce/0x110 lib/string.c:981 string_is_valid net/tipc/netlink_compat.c:176 [inline] tipc_nl_compat_bearer_disable+0x2a1/0x480 net/tipc/netlink_compat.c:449 __tipc_nl_compat_doit net/tipc/netlink_compat.c:327 [inline] tipc_nl_compat_doit+0x3ac/0xb00 net/tipc/netlink_compat.c:360 tipc_nl_compat_handle net/tipc/netlink_compat.c:1178 [inline] tipc_nl_compat_recv+0x1b1b/0x27b0 net/tipc/netlink_compat.c:1281 TLV_GET_DATA_LEN() may return a negtive int value, which will be used as size_t (becoming a big unsigned long) passed into memchr, cause this issue. Similar to what it does in tipc_nl_compat_bearer_enable(), this fix is to return -EINVAL when TLV_GET_DATA_LEN() is negtive in tipc_nl_compat_bearer_disable(), as well as in tipc_nl_compat_link_stat_dump() and tipc_nl_compat_link_reset_stats(). v1->v2: - add the missing Fixes tags per Eric's request. Fixes: 0762216c0ad2 ("tipc: fix uninit-value in tipc_nl_compat_bearer_enable") Fixes: 8b66fee7f8ee ("tipc: fix uninit-value in tipc_nl_compat_link_reset_stats") Reported-by: [email protected] Signed-off-by: Xin Long <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-06-24net: macb: do not copy the mac address if NULLAntoine Tenart1-1/+1
This patch fixes the MAC address setup in the probe. The MAC address retrieved using of_get_mac_address was checked for not containing an error, but it may also be NULL which wasn't tested. Fix it by replacing IS_ERR with IS_ERR_OR_NULL. Fixes: 541ddc66d665 ("net: macb: support of_get_mac_address new ERR_PTR error") Signed-off-by: Antoine Tenart <[email protected]> Acked-by: Nicolas Ferre <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-06-24net/packet: fix memory leak in packet_set_ring()Eric Dumazet1-1/+2
syzbot found we can leak memory in packet_set_ring(), if user application provides buggy parameters. Fixes: 7f953ab2ba46 ("af_packet: TX_RING support for TPACKET_V3") Signed-off-by: Eric Dumazet <[email protected]> Cc: Sowmini Varadhan <[email protected]> Reported-by: syzbot <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-06-24net/tls: fix page double free on TX cleanupDirk van der Merwe2-16/+2
With commit 94850257cf0f ("tls: Fix tls_device handling of partial records") a new path was introduced to cleanup partial records during sk_proto_close. This path does not handle the SW KTLS tx_list cleanup. This is unnecessary though since the free_resources calls for both SW and offload paths will cleanup a partial record. The visible effect is the following warning, but this bug also causes a page double free. WARNING: CPU: 7 PID: 4000 at net/core/stream.c:206 sk_stream_kill_queues+0x103/0x110 RIP: 0010:sk_stream_kill_queues+0x103/0x110 RSP: 0018:ffffb6df87e07bd0 EFLAGS: 00010206 RAX: 0000000000000000 RBX: ffff8c21db4971c0 RCX: 0000000000000007 RDX: ffffffffffffffa0 RSI: 000000000000001d RDI: ffff8c21db497270 RBP: ffff8c21db497270 R08: ffff8c29f4748600 R09: 000000010020001a R10: ffffb6df87e07aa0 R11: ffffffff9a445600 R12: 0000000000000007 R13: 0000000000000000 R14: ffff8c21f03f2900 R15: ffff8c21f03b8df0 Call Trace: inet_csk_destroy_sock+0x55/0x100 tcp_close+0x25d/0x400 ? tcp_check_oom+0x120/0x120 tls_sk_proto_close+0x127/0x1c0 inet_release+0x3c/0x60 __sock_release+0x3d/0xb0 sock_close+0x11/0x20 __fput+0xd8/0x210 task_work_run+0x84/0xa0 do_exit+0x2dc/0xb90 ? release_sock+0x43/0x90 do_group_exit+0x3a/0xa0 get_signal+0x295/0x720 do_signal+0x36/0x610 ? SYSC_recvfrom+0x11d/0x130 exit_to_usermode_loop+0x69/0xb0 do_syscall_64+0x173/0x180 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 RIP: 0033:0x7fe9b9abc10d RSP: 002b:00007fe9b19a1d48 EFLAGS: 00000246 ORIG_RAX: 00000000000000ca RAX: fffffffffffffe00 RBX: 0000000000000006 RCX: 00007fe9b9abc10d RDX: 0000000000000002 RSI: 0000000000000080 RDI: 00007fe948003430 RBP: 00007fe948003410 R08: 00007fe948003430 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00005603739d9080 R13: 00007fe9b9ab9f90 R14: 00007fe948003430 R15: 0000000000000000 Fixes: 94850257cf0f ("tls: Fix tls_device handling of partial records") Signed-off-by: Dirk van der Merwe <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-06-24mfd: stmfx: Fix an endian bug in stmfx_irq_handler()Dan Carpenter1-1/+3
It's not okay to cast a "u32 *" to "unsigned long *" when you are doing a for_each_set_bit() loop because that will break on big endian systems. Fixes: 386145601b82 ("mfd: stmfx: Uninitialized variable in stmfx_irq_handler()") Reported-by: Linus Torvalds <[email protected]> Signed-off-by: Dan Carpenter <[email protected]> Tested-by: Amelie Delaunay <[email protected]> Signed-off-by: Lee Jones <[email protected]>
2019-06-24samples: make pidfd-metadata fail gracefully on older kernelsDmitry V. Levin1-2/+6
Initialize pidfd to an invalid descriptor, to fail gracefully on those kernels that do not implement CLONE_PIDFD and leave pidfd unchanged. Signed-off-by: Dmitry V. Levin <[email protected]> Signed-off-by: Christian Brauner <[email protected]>
2019-06-24fork: don't check parent_tidptr with CLONE_PIDFDDmitry V. Levin1-12/+0
Give userspace a cheap and reliable way to tell whether CLONE_PIDFD is supported by the kernel or not. The easiest way is to pass an invalid file descriptor value in parent_tidptr, perform the syscall and verify that parent_tidptr has been changed to a valid file descriptor value. CLONE_PIDFD uses parent_tidptr to return pidfds. CLONE_PARENT_SETTID will use parent_tidptr to return the tid of the parent. The two flags cannot be used together. Old kernels that only support CLONE_PARENT_SETTID will not verify the value pointed to by parent_tidptr. This behavior is unchanged even with the introduction of CLONE_PIDFD. However, if CLONE_PIDFD is specified the kernel will currently check the value pointed to by parent_tidptr before placing the pidfd in the memory pointed to. EINVAL will be returned if the value in parent_tidptr is not 0. If CLONE_PIDFD is supported and fd 0 is closed, then the returned pidfd can and likely will be 0 and parent_tidptr will be unchanged. This means userspace must either check CLONE_PIDFD support beforehand or check that fd 0 is not closed when invoking CLONE_PIDFD. The check for pidfd == 0 was introduced during the v5.2 merge window by commit b3e583825266 ("clone: add CLONE_PIDFD") to ensure that CLONE_PIDFD could be potentially extended by passing in flags through the return argument. However, that extension would look horrible, and with the upcoming introduction of the clone3 syscall in v5.3 there is no need to extend legacy clone syscall this way. (Even if it would need to be extended, CLONE_DETACHED can be reused with CLONE_PIDFD.) So remove the pidfd == 0 check. Userspace that needs to be portable to kernels without CLONE_PIDFD support can then be advised to initialize pidfd to -1 and check the pidfd value returned by CLONE_PIDFD. Fixes: b3e583825266 ("clone: add CLONE_PIDFD") Signed-off-by: Dmitry V. Levin <[email protected]> Signed-off-by: Christian Brauner <[email protected]>
2019-06-24Merge tag 'mtd/fixes-for-5.2-rc7' of ↵Linus Torvalds3-12/+113
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux Pull mtd fixes from Miquel Raynal: - Set the raw NAND number of targets to the right value - Fix a bug uncovered by a recent patch on Spansion SPI-NOR flashes * tag 'mtd/fixes-for-5.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: mtd: spi-nor: use 16-bit WRR command when QE is set on spansion flashes mtd: rawnand: initialize ntargets with maxchips
2019-06-24Merge tag 'powerpc-5.2-6' of ↵Linus Torvalds4-10/+139
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: "One fix for a bug in our context id handling on 64-bit hash CPUs, which can lead to unrelated processes being able to read/write to each other's virtual memory. See the commit for full details. That is the fix for CVE-2019-12817. This also adds a kernel selftest for the bug" * tag 'powerpc-5.2-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: selftests/powerpc: Add test of fork with mapping above 512TB powerpc/mm/64s/hash: Reallocate context ids on fork
2019-06-24ARM: dts: imx6ul: fix PWM[1-4] interruptsSébastien Szymanski1-4/+4
According to the i.MX6UL/L RM, table 3.1 "ARM Cortex A7 domain interrupt summary", the interrupts for the PWM[1-4] go from 83 to 86. Fixes: b9901fe84f02 ("ARM: dts: imx6ul: add pwm[1-4] nodes") Signed-off-by: Sébastien Szymanski <[email protected]> Reviewed-by: Fabio Estevam <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2019-06-24Merge tag 'auxdisplay-for-linus-v5.2-rc7' of git://github.com/ojeda/linuxLinus Torvalds2-4/+5
Pull auxdisplay cleanup from Miguel Ojeda: "A cleanup for two drivers in auxdisplay: convert them to use vm_map_pages_zero() (Souptick Joarder)" * tag 'auxdisplay-for-linus-v5.2-rc7' of git://github.com/ojeda/linux: auxdisplay/ht16k33.c: Convert to use vm_map_pages_zero() auxdisplay/cfag12864bfb.c: Convert to use vm_map_pages_zero()
2019-06-23net/sched: cbs: Fix error path of cbs_module_initYueHaibing1-2/+7
If register_qdisc fails, we should unregister netdevice notifier. Reported-by: Hulk Robot <[email protected]> Fixes: e0a7683d30e9 ("net/sched: cbs: fix port_rate miscalculation") Signed-off-by: YueHaibing <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-06-23mtd: spi-nor: use 16-bit WRR command when QE is set on spansion flashesTudor Ambarus2-11/+111
SPI memory devices from different manufacturers have widely different configurations for Status, Control and Configuration registers. JEDEC 216C defines a new map for these common register bits and their functions, and describes how the individual bits may be accessed for a specific device. For the JEDEC 216B compliant flashes, we can partially deduce Status and Configuration registers functions by inspecting the 16th DWORD of BFPT. Older flashes that don't declare the SFDP tables (SPANSION FL512SAIFG1 311QQ063 A ©11 SPANSION) let the software decide how to interact with these registers. The commit dcb4b22eeaf4 ("spi-nor: s25fl512s supports region locking") uncovered a probe error for s25fl512s, when the Quad Enable bit CR[1] was set to one in the bootloader. When this bit is one, only the Write Status (01h) command with two data byts may be used, the 01h command with one data byte is not recognized and hence the error when trying to clear the block protection bits. Fix the above by using the Write Status (01h) command with two data bytes when the Quad Enable bit is one. Backward compatibility should be fine. The newly introduced spi_nor_spansion_clear_sr_bp() is tightly coupled with the spansion_quad_enable() function. Both assume that the Write Register with 16 bits, together with the Read Configuration Register (35h) instructions are supported. Fixes: dcb4b22eeaf44f91 ("spi-nor: s25fl512s supports region locking") Reported-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Tudor Ambarus <[email protected]> Tested-by: Jonas Bonn <[email protected]> Tested-by: Geert Uytterhoeven <[email protected]> Reviewed-by: Vignesh Raghavendra <[email protected]> Tested-by: Vignesh Raghavendra <[email protected]> Signed-off-by: Miquel Raynal <[email protected]>
2019-06-22tipc: change to use register_pernet_deviceXin Long1-6/+6
This patch is to fix a dst defcnt leak, which can be reproduced by doing: # ip net a c; ip net a s; modprobe tipc # ip net e s ip l a n eth1 type veth peer n eth1 netns c # ip net e c ip l s lo up; ip net e c ip l s eth1 up # ip net e s ip l s lo up; ip net e s ip l s eth1 up # ip net e c ip a a 1.1.1.2/8 dev eth1 # ip net e s ip a a 1.1.1.1/8 dev eth1 # ip net e c tipc b e m udp n u1 localip 1.1.1.2 # ip net e s tipc b e m udp n u1 localip 1.1.1.1 # ip net d c; ip net d s; rmmod tipc and it will get stuck and keep logging the error: unregister_netdevice: waiting for lo to become free. Usage count = 1 The cause is that a dst is held by the udp sock's sk_rx_dst set on udp rx path with udp_early_demux == 1, and this dst (eventually holding lo dev) can't be released as bearer's removal in tipc pernet .exit happens after lo dev's removal, default_device pernet .exit. "There are two distinct types of pernet_operations recognized: subsys and device. At creation all subsys init functions are called before device init functions, and at destruction all device exit functions are called before subsys exit function." So by calling register_pernet_device instead to register tipc_net_ops, the pernet .exit() will be invoked earlier than loopback dev's removal when a netns is being destroyed, as fou/gue does. Note that vxlan and geneve udp tunnels don't have this issue, as the udp sock is released in their device ndo_stop(). This fix is also necessary for tipc dst_cache, which will hold dsts on tx path and I will introduce in my next patch. Reported-by: Li Shuang <[email protected]> Signed-off-by: Xin Long <[email protected]> Acked-by: Jon Maloy <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-06-22sis900: fix TX completionSergej Benilov1-8/+8
Since commit 605ad7f184b60cfaacbc038aa6c55ee68dee3c89 "tcp: refine TSO autosizing", outbound throughput is dramatically reduced for some connections, as sis900 is doing TX completion within idle states only. Make TX completion happen after every transmitted packet. Test: netperf before patch: > netperf -H remote -l -2000000 -- -s 1000000 MIGRATED TCP STREAM TEST from 0.0.0.0 () port 0 AF_INET to 95.223.112.76 () port 0 AF_INET : demo Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 87380 327680 327680 253.44 0.06 after patch: > netperf -H remote -l -10000000 -- -s 1000000 MIGRATED TCP STREAM TEST from 0.0.0.0 () port 0 AF_INET to 95.223.112.76 () port 0 AF_INET : demo Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 87380 327680 327680 5.38 14.89 Thx to Dave Miller and Eric Dumazet for helpful hints Signed-off-by: Sergej Benilov <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-06-22net: stmmac: set IC bit when transmitting frames with HW timestampRoland Hii1-8/+14
When transmitting certain PTP frames, e.g. SYNC and DELAY_REQ, the PTP daemon, e.g. ptp4l, is polling the driver for the frame transmit hardware timestamp. The polling will most likely timeout if the tx coalesce is enabled due to the Interrupt-on-Completion (IC) bit is not set in tx descriptor for those frames. This patch will ignore the tx coalesce parameter and set the IC bit when transmitting PTP frames which need to report out the frame transmit hardware timestamp to user space. Fixes: f748be531d70 ("net: stmmac: Rework coalesce timer and fix multi-queue races") Signed-off-by: Roland Hii <[email protected]> Signed-off-by: Ong Boon Leong <[email protected]> Signed-off-by: Voon Weifeng <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-06-22net: stmmac: fixed new system time seconds value calculationRoland Hii1-1/+1
When ADDSUB bit is set, the system time seconds field is calculated as the complement of the seconds part of the update value. For example, if 3.000000001 seconds need to be subtracted from the system time, this field is calculated as 2^32 - 3 = 4294967296 - 3 = 0x100000000 - 3 = 0xFFFFFFFD Previously, the 0x100000000 is mistakenly written as 100000000. This is further simplified from sec = (0x100000000ULL - sec); to sec = -sec; Fixes: ba1ffd74df74 ("stmmac: fix PTP support for GMAC4") Signed-off-by: Roland Hii <[email protected]> Signed-off-by: Ong Boon Leong <[email protected]> Signed-off-by: Voon Weifeng <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-06-22Linux 5.2-rc6Linus Torvalds1-1/+1
2019-06-22Merge tag 'iommu-fix-v5.2-rc5' of ↵Linus Torvalds1-4/+3
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu fix from Joerg Roedel: "Revert a commit from the previous pile of fixes which causes new lockdep splats. It is better to revert it for now and work on a better and more well tested fix" * tag 'iommu-fix-v5.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: Revert "iommu/vt-d: Fix lock inversion between iommu->lock and device_domain_lock"
2019-06-22Revert "iommu/vt-d: Fix lock inversion between iommu->lock and ↵Peter Xu1-4/+3
device_domain_lock" This reverts commit 7560cc3ca7d9d11555f80c830544e463fcdb28b8. With 5.2.0-rc5 I can easily trigger this with lockdep and iommu=pt: ====================================================== WARNING: possible circular locking dependency detected 5.2.0-rc5 #78 Not tainted ------------------------------------------------------ swapper/0/1 is trying to acquire lock: 00000000ea2b3beb (&(&iommu->lock)->rlock){+.+.}, at: domain_context_mapping_one+0xa5/0x4e0 but task is already holding lock: 00000000a681907b (device_domain_lock){....}, at: domain_context_mapping_one+0x8d/0x4e0 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (device_domain_lock){....}: _raw_spin_lock_irqsave+0x3c/0x50 dmar_insert_one_dev_info+0xbb/0x510 domain_add_dev_info+0x50/0x90 dev_prepare_static_identity_mapping+0x30/0x68 intel_iommu_init+0xddd/0x1422 pci_iommu_init+0x16/0x3f do_one_initcall+0x5d/0x2b4 kernel_init_freeable+0x218/0x2c1 kernel_init+0xa/0x100 ret_from_fork+0x3a/0x50 -> #0 (&(&iommu->lock)->rlock){+.+.}: lock_acquire+0x9e/0x170 _raw_spin_lock+0x25/0x30 domain_context_mapping_one+0xa5/0x4e0 pci_for_each_dma_alias+0x30/0x140 dmar_insert_one_dev_info+0x3b2/0x510 domain_add_dev_info+0x50/0x90 dev_prepare_static_identity_mapping+0x30/0x68 intel_iommu_init+0xddd/0x1422 pci_iommu_init+0x16/0x3f do_one_initcall+0x5d/0x2b4 kernel_init_freeable+0x218/0x2c1 kernel_init+0xa/0x100 ret_from_fork+0x3a/0x50 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(device_domain_lock); lock(&(&iommu->lock)->rlock); lock(device_domain_lock); lock(&(&iommu->lock)->rlock); *** DEADLOCK *** 2 locks held by swapper/0/1: #0: 00000000033eb13d (dmar_global_lock){++++}, at: intel_iommu_init+0x1e0/0x1422 #1: 00000000a681907b (device_domain_lock){....}, at: domain_context_mapping_one+0x8d/0x4e0 stack backtrace: CPU: 2 PID: 1 Comm: swapper/0 Not tainted 5.2.0-rc5 #78 Hardware name: LENOVO 20KGS35G01/20KGS35G01, BIOS N23ET50W (1.25 ) 06/25/2018 Call Trace: dump_stack+0x85/0xc0 print_circular_bug.cold.57+0x15c/0x195 __lock_acquire+0x152a/0x1710 lock_acquire+0x9e/0x170 ? domain_context_mapping_one+0xa5/0x4e0 _raw_spin_lock+0x25/0x30 ? domain_context_mapping_one+0xa5/0x4e0 domain_context_mapping_one+0xa5/0x4e0 ? domain_context_mapping_one+0x4e0/0x4e0 pci_for_each_dma_alias+0x30/0x140 dmar_insert_one_dev_info+0x3b2/0x510 domain_add_dev_info+0x50/0x90 dev_prepare_static_identity_mapping+0x30/0x68 intel_iommu_init+0xddd/0x1422 ? printk+0x58/0x6f ? lockdep_hardirqs_on+0xf0/0x180 ? do_early_param+0x8e/0x8e ? e820__memblock_setup+0x63/0x63 pci_iommu_init+0x16/0x3f do_one_initcall+0x5d/0x2b4 ? do_early_param+0x8e/0x8e ? rcu_read_lock_sched_held+0x55/0x60 ? do_early_param+0x8e/0x8e kernel_init_freeable+0x218/0x2c1 ? rest_init+0x230/0x230 kernel_init+0xa/0x100 ret_from_fork+0x3a/0x50 domain_context_mapping_one() is taking device_domain_lock first then iommu lock, while dmar_insert_one_dev_info() is doing the reverse. That should be introduced by commit: 7560cc3ca7d9 ("iommu/vt-d: Fix lock inversion between iommu->lock and device_domain_lock", 2019-05-27) So far I still cannot figure out how the previous deadlock was triggered (I cannot find iommu lock taken before calling of iommu_flush_dev_iotlb()), however I'm pretty sure that that change should be incomplete at least because it does not fix all the places so we're still taking the locks in different orders, while reverting that commit is very clean to me so far that we should always take device_domain_lock first then the iommu lock. We can continue to try to find the real culprit mentioned in 7560cc3ca7d9, but for now I think we should revert it to fix current breakage. CC: Joerg Roedel <[email protected]> CC: Lu Baolu <[email protected]> CC: [email protected] Signed-off-by: Peter Xu <[email protected]> Tested-by: Chris Wilson <[email protected]> Signed-off-by: Joerg Roedel <[email protected]>
2019-06-22Merge tag 'pci-v5.2-fixes-1' of ↵Linus Torvalds1-0/+4
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fix from Bjorn Helgaas: "If an IOMMU is present, ignore the P2PDMA whitelist we added for v5.2 because we don't yet know how to support P2PDMA in that case (Logan Gunthorpe)" * tag 'pci-v5.2-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI/P2PDMA: Ignore root complex whitelist when an IOMMU is present
2019-06-22Merge tag 'scsi-fixes' of ↵Linus Torvalds4-11/+11
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Three driver fixes (and one version number update): a suspend hang in ufs, a qla hard lock on module removal and a qedi panic during discovery" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: qla2xxx: Fix hardlockup in abort command during driver remove scsi: ufs: Avoid runtime suspend possibly being blocked forever scsi: qedi: update driver version to 8.37.0.20 scsi: qedi: Check targetname while finding boot target information
2019-06-22Merge tag 'powerpc-5.2-5' of ↵Linus Torvalds8-9/+31
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: "This is a frustratingly large batch at rc5. Some of these were sent earlier but were missed by me due to being distracted by other things, and some took a while to track down due to needing manual bisection on old hardware. But still we clearly need to improve our testing of KVM, and of 32-bit, so that we catch these earlier. Summary: seven fixes, all for bugs introduced this cycle. - The commit to add KASAN support broke booting on 32-bit SMP machines, due to a refactoring that moved some setup out of the secondary CPU path. - A fix for another 32-bit SMP bug introduced by the fast syscall entry implementation for 32-bit BOOKE. And a build fix for the same commit. - Our change to allow the DAWR to be force enabled on Power9 introduced a bug in KVM, where we clobber r3 leading to a host crash. - The same commit also exposed a previously unreachable bug in the nested KVM handling of DAWR, which could lead to an oops in a nested host. - One of the DMA reworks broke the b43legacy WiFi driver on some people's powermacs, fix it by enabling a 30-bit ZONE_DMA on 32-bit. - A fix for TLB flushing in KVM introduced a new bug, as it neglected to also flush the ERAT, this could lead to memory corruption in the guest. Thanks to: Aaro Koskinen, Christoph Hellwig, Christophe Leroy, Larry Finger, Michael Neuling, Suraj Jitindar Singh" * tag 'powerpc-5.2-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: KVM: PPC: Book3S HV: Invalidate ERAT when flushing guest TLB entries powerpc: enable a 30-bit ZONE_DMA for 32-bit pmac KVM: PPC: Book3S HV: Only write DAWR[X] when handling h_set_dawr in real mode KVM: PPC: Book3S HV: Fix r3 corruption in h_set_dabr() powerpc/32: fix build failure on book3e with KVM powerpc/booke: fix fast syscall entry on SMP powerpc/32s: fix initial setup of segment registers on secondary CPU
2019-06-22Bluetooth: Fix regression with minimum encryption key size alignmentMarcel Holtmann2-14/+37
When trying to align the minimum encryption key size requirement for Bluetooth connections, it turns out doing this in a central location in the HCI connection handling code is not possible. Original Bluetooth version up to 2.0 used a security model where the L2CAP service would enforce authentication and encryption. Starting with Bluetooth 2.1 and Secure Simple Pairing that model has changed into that the connection initiator is responsible for providing an encrypted ACL link before any L2CAP communication can happen. Now connecting Bluetooth 2.1 or later devices with Bluetooth 2.0 and before devices are causing a regression. The encryption key size check needs to be moved out of the HCI connection handling into the L2CAP channel setup. To achieve this, the current check inside hci_conn_security() has been moved into l2cap_check_enc_key_size() helper function and then called from four decisions point inside L2CAP to cover all combinations of Secure Simple Pairing enabled devices and device using legacy pairing and legacy service security model. Fixes: d5bb334a8e17 ("Bluetooth: Align minimum encryption key size for LE and BR/EDR connections") Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=203643 Signed-off-by: Marcel Holtmann <[email protected]> Cc: [email protected] Signed-off-by: Linus Torvalds <[email protected]>
2019-06-22ppp: mppe: Add softdep to arc4Takashi Iwai1-0/+1
The arc4 crypto is mandatory at ppp_mppe probe time, so let's put a softdep line, so that the corresponding module gets prepared gracefully. Without this, a simple inclusion to initrd via dracut failed due to the missing dependency, for example. Signed-off-by: Takashi Iwai <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-06-22be2net: fix link failure after ethtool offline testPetr Oros1-6/+22
Certain cards in conjunction with certain switches need a little more time for link setup that results in ethtool link test failure after offline test. Patch adds a loop that waits for a link setup finish. Changes in v2: - added fixes header Fixes: 4276e47e2d1c ("be2net: Add link test to list of ethtool self tests.") Signed-off-by: Petr Oros <[email protected]> Reviewed-by: Ivan Vecera <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-06-22x86/apic: Fix integer overflow on 10 bit left shift of cpu_khzColin Ian King1-1/+2
The left shift of unsigned int cpu_khz will overflow for large values of cpu_khz, so cast it to a long long before shifting it to avoid overvlow. For example, this can happen when cpu_khz is 4194305, i.e. ~4.2 GHz. Addresses-Coverity: ("Unintentional integer overflow") Fixes: 8c3ba8d04924 ("x86, apic: ack all pending irqs when crashed/on kexec") Signed-off-by: Colin Ian King <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: "H . Peter Anvin" <[email protected]> Cc: [email protected] Link: https://lkml.kernel.org/r/[email protected]
2019-06-22Merge tag 'efi-urgent' of ↵Thomas Gleixner12110-100437/+19077
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi into efi/urgent Pull another handful of EFI fixes for v5.2 from Arnd: - Fix a potential crash after kexec on arm64 with GICv3 - Fix a build warning on x86 - Stop policing the BGRT feature flags - Use a non-blocking version of SetVariable() in the boot control driver
2019-06-22efibc: Replace variable set function in notifier callTian Baofeng1-5/+7
Replace the variable set function from "efivar_entry_set" to "efivar_entry_set_safe" in efibc panic notifier. In safe function parameter "block" will set to false and will call "efivar_entry_set_nonblocking"to set efi variables. efivar_entry_set_nonblocking is guaranteed to not block and is suitable for calling from crash/panic handlers. In UEFI android platform, when warm reset happens, with this change, efibc will not block the reboot process. Otherwise, set variable will call queue work and send to other offlined cpus then cause another panic, finally will cause reboot failure. Signed-off-by: Tian Baofeng <[email protected]> Signed-off-by: Luo XinanX <[email protected]> Signed-off-by: Ard Biesheuvel <[email protected]>
2019-06-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds25-112/+123
Pull networking fixes from David Miller: 1) Fix leak of unqueued fragments in ipv6 nf_defrag, from Guillaume Nault. 2) Don't access the DDM interface unless the transceiver implements it in bnx2x, from Mauro S. M. Rodrigues. 3) Don't double fetch 'len' from userspace in sock_getsockopt(), from JingYi Hou. 4) Sign extension overflow in lio_core, from Colin Ian King. 5) Various netem bug fixes wrt. corrupted packets from Jakub Kicinski. 6) Fix epollout hang in hvsock, from Sunil Muthuswamy. 7) Fix regression in default fib6_type, from David Ahern. 8) Handle memory limits in tcp_fragment more appropriately, from Eric Dumazet. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (24 commits) tcp: refine memory limit test in tcp_fragment() inet: clear num_timeout reqsk_alloc() net: mvpp2: debugfs: Add pmap to fs dump ipv6: Default fib6_type to RTN_UNICAST when not set net: hns3: Fix inconsistent indenting net/af_iucv: always register net_device notifier net/af_iucv: build proper skbs for HiperTransport net/af_iucv: remove GFP_DMA restriction for HiperTransport net: dsa: mv88e6xxx: fix shift of FID bits in mv88e6185_g1_vtu_loadpurge() hvsock: fix epollout hang from race condition net/udp_gso: Allow TX timestamp with UDP GSO net: netem: fix use after free and double free with packet corruption net: netem: fix backlog accounting for corrupted GSO frames net: lio_core: fix potential sign-extension overflow on large shift tipc: pass tunnel dev as NULL to udp_tunnel(6)_xmit_skb ip6_tunnel: allow not to count pkts on tstats by passing dev as NULL ip_tunnel: allow not to count pkts on tstats by setting skb's dev to NULL tun: wake up waitqueues after IFF_UP is set net: remove duplicate fetch in sock_getsockopt tipc: fix issues with early FAILOVER_MSG from peer ...
Powered by cgit, Gruvboxed by Blaster4385.