aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2021-11-29rxrpc: Fix rxrpc_local leak in rxrpc_lookup_peer()Eiichi Tsukata1-5/+9
Need to call rxrpc_put_local() for peer candidate before kfree() as it holds a ref to rxrpc_local. [DH: v2: Changed to abstract the peer freeing code out into a function] Fixes: 9ebeddef58c4 ("rxrpc: rxrpc_peer needs to hold a ref on the rxrpc_local record") Signed-off-by: Eiichi Tsukata <[email protected]> Signed-off-by: David Howells <[email protected]> Reviewed-by: Marc Dionne <[email protected]> cc: [email protected] Link: https://lore.kernel.org/all/[email protected]/ # v1
2021-11-29rxrpc: Fix rxrpc_peer leak in rxrpc_look_up_bundle()Eiichi Tsukata1-5/+9
Need to call rxrpc_put_peer() for bundle candidate before kfree() as it holds a ref to rxrpc_peer. [DH: v2: Changed to abstract out the bundle freeing code into a function] Fixes: 245500d853e9 ("rxrpc: Rewrite the client connection manager") Signed-off-by: Eiichi Tsukata <[email protected]> Signed-off-by: David Howells <[email protected]> Reviewed-by: Marc Dionne <[email protected]> cc: [email protected] Link: https://lore.kernel.org/r/[email protected]/ # v1
2021-11-29ipv6: fix memory leak in fib6_rule_suppressmsizanoen14-4/+7
The kernel leaks memory when a `fib` rule is present in IPv6 nftables firewall rules and a suppress_prefix rule is present in the IPv6 routing rules (used by certain tools such as wg-quick). In such scenarios, every incoming packet will leak an allocation in `ip6_dst_cache` slab cache. After some hours of `bpftrace`-ing and source code reading, I tracked down the issue to ca7a03c41753 ("ipv6: do not free rt if FIB_LOOKUP_NOREF is set on suppress rule"). The problem with that change is that the generic `args->flags` always have `FIB_LOOKUP_NOREF` set[1][2] but the IPv6-specific flag `RT6_LOOKUP_F_DST_NOREF` might not be, leading to `fib6_rule_suppress` not decreasing the refcount when needed. How to reproduce: - Add the following nftables rule to a prerouting chain: meta nfproto ipv6 fib saddr . mark . iif oif missing drop This can be done with: sudo nft create table inet test sudo nft create chain inet test test_chain '{ type filter hook prerouting priority filter + 10; policy accept; }' sudo nft add rule inet test test_chain meta nfproto ipv6 fib saddr . mark . iif oif missing drop - Run: sudo ip -6 rule add table main suppress_prefixlength 0 - Watch `sudo slabtop -o | grep ip6_dst_cache` to see memory usage increase with every incoming ipv6 packet. This patch exposes the protocol-specific flags to the protocol specific `suppress` function, and check the protocol-specific `flags` argument for RT6_LOOKUP_F_DST_NOREF instead of the generic FIB_LOOKUP_NOREF when decreasing the refcount, like this. [1]: https://github.com/torvalds/linux/blob/ca7a03c4175366a92cee0ccc4fec0038c3266e26/net/ipv6/fib6_rules.c#L71 [2]: https://github.com/torvalds/linux/blob/ca7a03c4175366a92cee0ccc4fec0038c3266e26/net/ipv6/fib6_rules.c#L99 Link: https://bugzilla.kernel.org/show_bug.cgi?id=215105 Fixes: ca7a03c41753 ("ipv6: do not free rt if FIB_LOOKUP_NOREF is set on suppress rule") Cc: [email protected] Signed-off-by: Jason A. Donenfeld <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-11-29Merge branch 'atlantic-fixes'David S. Miller11-55/+184
Sudarsana Reddy Kalluru says: ==================== net: atlantic: 11-2021 fixes The patch series contains fixes for atlantic driver to improve support of latest AQC113 chipset. Please consider applying it to 'net' tree. ==================== Signed-off-by: David S. Miller <[email protected]>
2021-11-29atlantic: Remove warn trace message.Sameer Saurabh1-3/+0
Remove the warn trace message - it's not a correct check here, because the function can still be called on the device in DOWN state Fixes: 508f2e3dce454 ("net: atlantic: split rx and tx per-queue stats") Signed-off-by: Sameer Saurabh <[email protected]> Signed-off-by: Sudarsana Reddy Kalluru <[email protected]> Signed-off-by: Igor Russkikh <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-11-29atlantic: Fix statistics logic for production hardwareDmitry Bogdanov5-27/+139
B0 is the main and widespread device revision of atlantic2 HW. In the current state, driver will incorrectly fetch the statistics for this revision. Fixes: 5cfd54d7dc186 ("net: atlantic: minimal A2 fw_ops") Signed-off-by: Dmitry Bogdanov <[email protected]> Signed-off-by: Sudarsana Reddy Kalluru <[email protected]> Signed-off-by: Igor Russkikh <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-11-29Remove Half duplex mode speed capabilities.Sameer Saurabh1-4/+1
Since Half Duplex mode has been deprecated by the firmware, driver should not advertise Half Duplex speed in ethtool support link speed values. Fixes: 071a02046c262 ("net: atlantic: A2: half duplex support") Signed-off-by: Sameer Saurabh <[email protected]> Signed-off-by: Igor Russkikh <[email protected]> Signed-off-by: Sudarsana Reddy Kalluru <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-11-29atlantic: Add missing DIDs and fix 115c.Nikita Danilov4-1/+27
At the late production stages new dev ids were introduced. These are now in production, so its important for the driver to recognize these. And also fix the board caps for AQC115C adapter. Fixes: b3f0c79cba206 ("net: atlantic: A2 hw_ops skeleton") Signed-off-by: Nikita Danilov <[email protected]> Signed-off-by: Sudarsana Reddy Kalluru <[email protected]> Signed-off-by: Igor Russkikh <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-11-29atlantic: Fix to display FW bundle version instead of FW mac version.Sameer Saurabh1-3/+3
The correct way to reflect firmware version is to use bundle version. Hence populating the same instead of MAC fw version. Fixes: c1be0bf092bd2 ("net: atlantic: common functions needed for basic A2 init/deinit hw_ops") Signed-off-by: Sameer Saurabh <[email protected]> Signed-off-by: Sudarsana Reddy Kalluru <[email protected]> Signed-off-by: Igor Russkikh <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-11-29atlatnic: enable Nbase-t speeds with base-tNikita Danilov3-19/+13
When 2.5G is advertised, N-Base should be advertised against the T-base caps. N5G is out of use in baseline code and driver should treat both 5G and N5G (and also 2.5G and N2.5G) equally from user perspective. Fixes: 5cfd54d7dc186 ("net: atlantic: minimal A2 fw_ops") Signed-off-by: Nikita Danilov <[email protected]> Signed-off-by: Sudarsana Reddy Kalluru <[email protected]> Signed-off-by: Igor Russkikh <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-11-29atlantic: Increase delay for fw transactionsDmitry Bogdanov1-2/+5
The max waiting period (of 1 ms) while reading the data from FW shared buffer is too small for certain types of data (e.g., stats). There's a chance that FW could be updating buffer at the same time and driver would be unsuccessful in reading data. Firmware manual recommends to have 1 sec timeout to fix this issue. Fixes: 5cfd54d7dc186 ("net: atlantic: minimal A2 fw_ops") Signed-off-by: Dmitry Bogdanov <[email protected]> Signed-off-by: Sudarsana Reddy Kalluru <[email protected]> Signed-off-by: Igor Russkikh <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-11-29drm/vc4: kms: Fix previous HVS commit waitMaxime Ripard1-8/+2
Our current code is supposed to serialise the commits by waiting for all the drm_crtc_commits associated to the previous HVS state. However, assuming we have two CRTCs running and being configured and we configure each one alternately, we end up in a situation where we're not waiting at all. Indeed, starting with a state (state 0) where both CRTCs are running, and doing a commit (state 1) on the first CRTC (CRTC 0), we'll associate its commit to its assigned FIFO in vc4_hvs_state. If we get a new commit (state 2), this time affecting the second CRTC (CRTC 1), the DRM core will allow both commits to execute in parallel (assuming they don't have any share resources). Our code in vc4_atomic_commit_tail is supposed to make sure we only get one commit at a time and serialised by order of submission. It does so by using for_each_old_crtc_in_state, making sure that the CRTC has a FIFO assigned, is used, and has a commit pending. If it does, then we'll wait for the commit before going forward. During the transition from state 0 to state 1, as our old CRTC state we get the CRTC 0 state 0, its commit, we wait for it, everything works fine. During the transition from state 1 to state 2 though, the use of for_each_old_crtc_in_state is wrong. Indeed, while the code assumes it's returning the state of the CRTC in the old state (so CRTC 0 state 1), it actually returns the old state of the CRTC affected by the current commit, so CRTC 0 state 0 since it wasn't part of state 1. Due to this, if we alternate between the configuration of CRTC 0 and CRTC 1, we never actually wait for anything since we should be waiting on the other every time, but it never is affected by the previous commit. Change the logic to, at every commit, look at every FIFO in the previous HVS state, and if it's in use and has a commit associated to it, wait for that commit. Fixes: 9ec03d7f1ed3 ("drm/vc4: kms: Wait on previous FIFO users before a commit") Signed-off-by: Maxime Ripard <[email protected]> Reviewed-by: Dave Stevenson <[email protected]> Tested-by: Jian-Hong Pan <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-11-29drm/vc4: kms: Don't duplicate pending commitMaxime Ripard1-6/+0
Our HVS global state, when duplicated, will also copy the pointer to the drm_crtc_commit (and increase the reference count) for each FIFO if the pointer is not NULL. However, our atomic_setup function will overwrite that pointer without putting the reference back leading to a memory leak. Since the commit is only relevant during the atomic commit process, it doesn't make sense to duplicate the reference to the commit anyway. Let's remove it. Fixes: 9ec03d7f1ed3 ("drm/vc4: kms: Wait on previous FIFO users before a commit") Signed-off-by: Maxime Ripard <[email protected]> Reviewed-by: Dave Stevenson <[email protected]> Tested-by: Jian-Hong Pan <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-11-29drm/vc4: kms: Clear the HVS FIFO commit pointer once doneMaxime Ripard1-0/+1
Commit 9ec03d7f1ed3 ("drm/vc4: kms: Wait on previous FIFO users before a commit") introduced a wait on the previous commit done on a given HVS FIFO. However, we never cleared that pointer once done. Since drm_crtc_commit_put can free the drm_crtc_commit structure directly if we were the last user, this means that it can lead to a use-after free if we were to duplicate the state, and that stale pointer would even be copied to the new state. Set the pointer to NULL once we're done with the wait so that we don't carry over a pointer to a free'd structure. Fixes: 9ec03d7f1ed3 ("drm/vc4: kms: Wait on previous FIFO users before a commit") Signed-off-by: Maxime Ripard <[email protected]> Reviewed-by: Dave Stevenson <[email protected]> Tested-by: Jian-Hong Pan <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-11-29drm/vc4: kms: Add missing drm_crtc_commit_putMaxime Ripard1-1/+8
Commit 9ec03d7f1ed3 ("drm/vc4: kms: Wait on previous FIFO users before a commit") introduced a global state for the HVS, with each FIFO storing the current CRTC commit so that we can properly synchronize commits. However, the refcounting was off and we thus ended up leaking the drm_crtc_commit structure every commit. Add a drm_crtc_commit_put to prevent the leakage. Fixes: 9ec03d7f1ed3 ("drm/vc4: kms: Wait on previous FIFO users before a commit") Signed-off-by: Maxime Ripard <[email protected]> Reviewed-by: Dave Stevenson <[email protected]> Tested-by: Jian-Hong Pan <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-11-29drm/vc4: kms: Fix return code checkMaxime Ripard1-5/+5
The HVS global state functions return an error pointer, but in most cases we check if it's NULL, possibly resulting in an invalid pointer dereference. Fixes: 9ec03d7f1ed3 ("drm/vc4: kms: Wait on previous FIFO users before a commit") Signed-off-by: Maxime Ripard <[email protected]> Reviewed-by: Dave Stevenson <[email protected]> Tested-by: Jian-Hong Pan <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-11-29drm/vc4: kms: Wait for the commit before increasing our clock rateMaxime Ripard1-3/+3
Several DRM/KMS atomic commits can run in parallel if they affect different CRTC. These commits share the global HVS state, so we have some code to make sure we run commits in sequence. This synchronization code is one of the first thing that runs in vc4_atomic_commit_tail(). Another constraints we have is that we need to make sure the HVS clock gets a boost during the commit. That code relies on clk_set_min_rate and will remove the old minimum and set a new one. We also need another, temporary, minimum for the duration of the commit. The algorithm is thus to set a temporary minimum, drop the previous one, do the commit, and finally set the minimum for the current mode. However, the part that sets the temporary minimum and drops the older one runs before the commit synchronization code. Thus, under the proper conditions, we can end up mixing up the minimums and ending up with the wrong one for our current step. To avoid it, let's move the clock setup in the protected section. Fixes: d7d96c00e585 ("drm/vc4: hvs: Boost the core clock during modeset") Signed-off-by: Maxime Ripard <[email protected]> Reviewed-by: Dave Stevenson <[email protected]> Tested-by: Jian-Hong Pan <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-11-29loop: Use pr_warn_once() for loop_control_remove() warningTetsuo Handa1-1/+1
kernel test robot reported that RCU stall via printk() flooding is possible [1] when stress testing. Link: https://lkml.kernel.org/r/20211129073709.GA18483@xsang-OptiPlex-9020 [1] Reported-by: kernel test robot <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Signed-off-by: Tetsuo Handa <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2021-11-29net/mlx4_en: Update reported link modes for 1/10GErik Ekman1-3/+3
When link modes were initially added in commit 2c762679435dc ("net/mlx4_en: Use PTYS register to query ethtool settings") and later updated for the new ethtool API in commit 3d8f7cc78d0eb ("net: mlx4: use new ETHTOOL_G/SSETTINGS API") the only 1/10G non-baseT link modes configured were 1000baseKX, 10000baseKX4 and 10000baseKR. It looks like these got picked to represent other modes since nothing better was available. Switch to using more specific link modes added in commit 5711a98221443 ("net: ethtool: add support for 1000BaseX and missing 10G link modes"). Tested with MCX311A-XCAT connected via DAC. Before: % sudo ethtool enp3s0 Settings for enp3s0: Supported ports: [ FIBRE ] Supported link modes: 1000baseKX/Full 10000baseKR/Full Supported pause frame use: Symmetric Receive-only Supports auto-negotiation: No Supported FEC modes: Not reported Advertised link modes: 1000baseKX/Full 10000baseKR/Full Advertised pause frame use: Symmetric Advertised auto-negotiation: No Advertised FEC modes: Not reported Speed: 10000Mb/s Duplex: Full Auto-negotiation: off Port: Direct Attach Copper PHYAD: 0 Transceiver: internal Supports Wake-on: d Wake-on: d Current message level: 0x00000014 (20) link ifdown Link detected: yes With this change: % sudo ethtool enp3s0 Settings for enp3s0: Supported ports: [ FIBRE ] Supported link modes: 1000baseX/Full 10000baseCR/Full 10000baseSR/Full Supported pause frame use: Symmetric Receive-only Supports auto-negotiation: No Supported FEC modes: Not reported Advertised link modes: 1000baseX/Full 10000baseCR/Full 10000baseSR/Full Advertised pause frame use: Symmetric Advertised auto-negotiation: No Advertised FEC modes: Not reported Speed: 10000Mb/s Duplex: Full Auto-negotiation: off Port: Direct Attach Copper PHYAD: 0 Transceiver: internal Supports Wake-on: d Wake-on: d Current message level: 0x00000014 (20) link ifdown Link detected: yes Tested-by: Michael Stapelberg <[email protected]> Signed-off-by: Erik Ekman <[email protected]> Reviewed-by: Tariq Toukan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-11-29mctp: test: fix skb free in test device txJeremy Kerr1-1/+1
In our test device, we're currently freeing skbs in the transmit path with kfree(), rather than kfree_skb(). This change uses the correct kfree_skb() instead. Fixes: ded21b722995 ("mctp: Add test utils") Reported-by: kernel test robot <[email protected]> Reported-by: Dan Carpenter <[email protected]> Signed-off-by: Jeremy Kerr <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-11-29net/tls: Fix authentication failure in CCM modeTianjia Zhang1-2/+2
When the TLS cipher suite uses CCM mode, including AES CCM and SM4 CCM, the first byte of the B0 block is flags, and the real IV starts from the second byte. The XOR operation of the IV and rec_seq should be skip this byte, that is, add the iv_offset. Fixes: f295b3ae9f59 ("net/tls: Add support of AES128-CCM based ciphers") Signed-off-by: Tianjia Zhang <[email protected]> Cc: Vakul Garg <[email protected]> Cc: [email protected] # v5.2+ Signed-off-by: David S. Miller <[email protected]>
2021-11-29Merge branch 'mpls-notifications'David S. Miller2-36/+63
Benjamin Poirier says: ==================== net: mpls: Netlink notification fixes fix missing or inaccurate route notifications when devices used in nexthops are deleted. ==================== Signed-off-by: David S. Miller <[email protected]>
2021-11-29net: mpls: Remove rcu protection from nh_devBenjamin Poirier2-25/+16
Following the previous commit, nh_dev can no longer be accessed and modified concurrently. Signed-off-by: Benjamin Poirier <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-11-29net: mpls: Fix notifications when deleting a deviceBenjamin Poirier1-16/+52
There are various problems related to netlink notifications for mpls route changes in response to interfaces being deleted: * delete interface of only nexthop DELROUTE notification is missing RTA_OIF attribute * delete interface of non-last nexthop NEWROUTE notification is missing entirely * delete interface of last nexthop DELROUTE notification is missing nexthop All of these problems stem from the fact that existing routes are modified in-place before sending a notification. Restructure mpls_ifdown() to avoid changing the route in the DELROUTE cases and to create a copy in the NEWROUTE case. Fixes: f8efb73c97e2 ("mpls: multipath route support") Signed-off-by: Benjamin Poirier <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-11-29net: usb: lan78xx: lan78xx_phy_init(): use PHY_POLL instead of "0" if no IRQ ↵Sven Schuchmann1-1/+1
is available On most systems request for IRQ 0 will fail, phylib will print an error message and fall back to polling. To fix this set the phydev->irq to PHY_POLL if no IRQ is available. Fixes: cc89c323a30e ("lan78xx: Use irq_domain for phy interrupt from USB Int. EP") Reviewed-by: Andrew Lunn <[email protected]> Signed-off-by: Sven Schuchmann <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-11-29USB: NO_LPM quirk Lenovo Powered USB-C Travel HubOle Ernst1-0/+3
This is another branded 8153 device that doesn't work well with LPM: r8152 2-2.1:1.0 enp0s13f0u2u1: Stop submitting intr, status -71 Disable LPM to resolve the issue. Signed-off-by: Ole Ernst <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-11-29net: dsa: realtek-smi: fix indirect reg access for ports>3Luiz Angelo Daros de Luca1-1/+8
This switch family can have up to 8 UTP ports {0..7}. However, INDIRECT_ACCESS_ADDRESS_PHYNUM_MASK was using 2 bits instead of 3, dropping the most significant bit during indirect register reads and writes. Reading or writing ports 4, 5, 6, and 7 registers was actually manipulating, respectively, ports 0, 1, 2, and 3 registers. This is not sufficient but necessary to support any variant with more than 4 UTP ports, like RTL8367S. rtl8365mb_phy_{read,write} will now returns -EINVAL if phy is greater than 7. Fixes: 4af2950c50c8 ("net: dsa: realtek-smi: add rtl8365mb subdriver for RTL8365MB-VC") Signed-off-by: Luiz Angelo Daros de Luca <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-11-29tcp: fix page frag corruption on page faultPaolo Abeni1-5/+8
Steffen reported a TCP stream corruption for HTTP requests served by the apache web-server using a cifs mount-point and memory mapping the relevant file. The root cause is quite similar to the one addressed by commit 20eb4f29b602 ("net: fix sk_page_frag() recursion from memory reclaim"). Here the nested access to the task page frag is caused by a page fault on the (mmapped) user-space memory buffer coming from the cifs file. The page fault handler performs an smb transaction on a different socket, inside the same process context. Since sk->sk_allaction for such socket does not prevent the usage for the task_frag, the nested allocation modify "under the hood" the page frag in use by the outer sendmsg call, corrupting the stream. The overall relevant stack trace looks like the following: httpd 78268 [001] 3461630.850950: probe:tcp_sendmsg_locked: ffffffff91461d91 tcp_sendmsg_locked+0x1 ffffffff91462b57 tcp_sendmsg+0x27 ffffffff9139814e sock_sendmsg+0x3e ffffffffc06dfe1d smb_send_kvec+0x28 [...] ffffffffc06cfaf8 cifs_readpages+0x213 ffffffff90e83c4b read_pages+0x6b ffffffff90e83f31 __do_page_cache_readahead+0x1c1 ffffffff90e79e98 filemap_fault+0x788 ffffffff90eb0458 __do_fault+0x38 ffffffff90eb5280 do_fault+0x1a0 ffffffff90eb7c84 __handle_mm_fault+0x4d4 ffffffff90eb8093 handle_mm_fault+0xc3 ffffffff90c74f6d __do_page_fault+0x1ed ffffffff90c75277 do_page_fault+0x37 ffffffff9160111e page_fault+0x1e ffffffff9109e7b5 copyin+0x25 ffffffff9109eb40 _copy_from_iter_full+0xe0 ffffffff91462370 tcp_sendmsg_locked+0x5e0 ffffffff91462370 tcp_sendmsg_locked+0x5e0 ffffffff91462b57 tcp_sendmsg+0x27 ffffffff9139815c sock_sendmsg+0x4c ffffffff913981f7 sock_write_iter+0x97 ffffffff90f2cc56 do_iter_readv_writev+0x156 ffffffff90f2dff0 do_iter_write+0x80 ffffffff90f2e1c3 vfs_writev+0xa3 ffffffff90f2e27c do_writev+0x5c ffffffff90c042bb do_syscall_64+0x5b ffffffff916000ad entry_SYSCALL_64_after_hwframe+0x65 The cifs filesystem rightfully sets sk_allocations to GFP_NOFS, we can avoid the nesting using the sk page frag for allocation lacking the __GFP_FS flag. Do not define an additional mm-helper for that, as this is strictly tied to the sk page frag usage. v1 -> v2: - use a stricted sk_page_frag() check instead of reordering the code (Eric) Reported-by: Steffen Froemer <[email protected]> Fixes: 5640f7685831 ("net: use a per task frag allocator") Signed-off-by: Paolo Abeni <[email protected]> Reviewed-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-11-29i2c: stm32f7: flush TX FIFO upon transfer errorsAlain Volmat1-1/+19
While handling an error during transfer (ex: NACK), it could happen that the driver has already written data into TXDR before the transfer get stopped. This commit add TXDR Flush after end of transfer in case of error to avoid sending a wrong data on any other slave upon next transfer. Fixes: aeb068c57214 ("i2c: i2c-stm32f7: add driver") Signed-off-by: Alain Volmat <[email protected]> Reviewed-by: Pierre-Yves MORDRET <[email protected]> Signed-off-by: Wolfram Sang <[email protected]>
2021-11-29net: stmmac: Avoid DMA_CHAN_CONTROL write if no Split Header supportVincent Whitchurch1-5/+6
The driver assumes that split headers can be enabled/disabled without stopping/starting the device, so it writes DMA_CHAN_CONTROL from stmmac_set_features(). However, on my system (IP v5.10a without Split Header support), simply writing DMA_CHAN_CONTROL when DMA is running (for example, with the commands below) leads to a TX watchdog timeout. host$ socat TCP-LISTEN:1024,fork,reuseaddr - & device$ ethtool -K eth0 tso off device$ ethtool -K eth0 tso on device$ dd if=/dev/zero bs=1M count=10 | socat - TCP4:host:1024 <tx watchdog timeout> Note that since my IP is configured without Split Header support, the driver always just reads and writes the same value to the DMA_CHAN_CONTROL register. I don't have access to any platforms with Split Header support so I don't know if these writes to the DMA_CHAN_CONTROL while DMA is running actually work properly on such systems. I could not find anything in the databook that says that DMA_CHAN_CONTROL should not be written when the DMA is running. But on systems without Split Header support, there is in any case no need to call enable_sph() in stmmac_set_features() at all since SPH can never be toggled, so we can avoid the watchdog timeout there by skipping this call. Fixes: 8c6fc097a2f4acf ("net: stmmac: gmac4+: Add Split Header support") Signed-off-by: Vincent Whitchurch <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-11-29sata_fsl: fix warning in remove_proc_entry when rmmod sata_fslBaokun Li1-5/+3
Trying to remove the fsl-sata module in the PPC64 GNU/Linux leads to the following warning: ------------[ cut here ]------------ remove_proc_entry: removing non-empty directory 'irq/69', leaking at least 'fsl-sata[ff0221000.sata]' WARNING: CPU: 3 PID: 1048 at fs/proc/generic.c:722 .remove_proc_entry+0x20c/0x220 IRQMASK: 0 NIP [c00000000033826c] .remove_proc_entry+0x20c/0x220 LR [c000000000338268] .remove_proc_entry+0x208/0x220 Call Trace: .remove_proc_entry+0x208/0x220 (unreliable) .unregister_irq_proc+0x104/0x140 .free_desc+0x44/0xb0 .irq_free_descs+0x9c/0xf0 .irq_dispose_mapping+0x64/0xa0 .sata_fsl_remove+0x58/0xa0 [sata_fsl] .platform_drv_remove+0x40/0x90 .device_release_driver_internal+0x160/0x2c0 .driver_detach+0x64/0xd0 .bus_remove_driver+0x70/0xf0 .driver_unregister+0x38/0x80 .platform_driver_unregister+0x14/0x30 .fsl_sata_driver_exit+0x18/0xa20 [sata_fsl] ---[ end trace 0ea876d4076908f5 ]--- The driver creates the mapping by calling irq_of_parse_and_map(), so it also has to dispose the mapping. But the easy way out is to simply use platform_get_irq() instead of irq_of_parse_map(). Also we should adapt return value checking and propagate error values. In this case the mapping is not managed by the device but by the of core, so the device has not to dispose the mapping. Fixes: faf0b2e5afe7 ("drivers/ata: add support to Freescale 3.0Gbps SATA Controller") Cc: [email protected] Reported-by: Hulk Robot <[email protected]> Signed-off-by: Baokun Li <[email protected]> Reviewed-by: Sergei Shtylyov <[email protected]> Signed-off-by: Damien Le Moal <[email protected]>
2021-11-29sata_fsl: fix UAF in sata_fsl_port_stop when rmmod sata_fslBaokun Li1-2/+10
When the `rmmod sata_fsl.ko` command is executed in the PPC64 GNU/Linux, a bug is reported: ================================================================== BUG: Unable to handle kernel data access on read at 0x80000800805b502c Oops: Kernel access of bad area, sig: 11 [#1] NIP [c0000000000388a4] .ioread32+0x4/0x20 LR [80000000000c6034] .sata_fsl_port_stop+0x44/0xe0 [sata_fsl] Call Trace: .free_irq+0x1c/0x4e0 (unreliable) .ata_host_stop+0x74/0xd0 [libata] .release_nodes+0x330/0x3f0 .device_release_driver_internal+0x178/0x2c0 .driver_detach+0x64/0xd0 .bus_remove_driver+0x70/0xf0 .driver_unregister+0x38/0x80 .platform_driver_unregister+0x14/0x30 .fsl_sata_driver_exit+0x18/0xa20 [sata_fsl] .__se_sys_delete_module+0x1ec/0x2d0 .system_call_exception+0xfc/0x1f0 system_call_common+0xf8/0x200 ================================================================== The triggering of the BUG is shown in the following stack: driver_detach device_release_driver_internal __device_release_driver drv->remove(dev) --> platform_drv_remove/platform_remove drv->remove(dev) --> sata_fsl_remove iounmap(host_priv->hcr_base); <---- unmap kfree(host_priv); <---- free devres_release_all release_nodes dr->node.release(dev, dr->data) --> ata_host_stop ap->ops->port_stop(ap) --> sata_fsl_port_stop ioread32(hcr_base + HCONTROL) <---- UAF host->ops->host_stop(host) The iounmap(host_priv->hcr_base) and kfree(host_priv) functions should not be executed in drv->remove. These functions should be executed in host_stop after port_stop. Therefore, we move these functions to the new function sata_fsl_host_stop and bind the new function to host_stop. Fixes: faf0b2e5afe7 ("drivers/ata: add support to Freescale 3.0Gbps SATA Controller") Cc: [email protected] Reported-by: Hulk Robot <[email protected]> Signed-off-by: Baokun Li <[email protected]> Reviewed-by: Sergei Shtylyov <[email protected]> Signed-off-by: Damien Le Moal <[email protected]>
2021-11-29pata_falcon: Avoid type warnings from sparseFinn Thain1-8/+8
The zero day bot reported some sparse complaints in pata_falcon.c. E.g. drivers/ata/pata_falcon.c:58:41: warning: cast removes address space '__iomem' of expression drivers/ata/pata_falcon.c:58:41: warning: incorrect type in argument 1 (different address spaces) drivers/ata/pata_falcon.c:58:41: expected unsigned short volatile [noderef] [usertype] __iomem *port drivers/ata/pata_falcon.c:58:41: got unsigned short [usertype] * The same thing shows up in 8 places, all told. Avoid this by removing unnecessary type casts. Cc: Jens Axboe <[email protected]> Cc: Michael Schmitz <[email protected]> Cc: Geert Uytterhoeven <[email protected]> Reported-by: kernel test robot <[email protected]> Suggested-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Finn Thain <[email protected]> Reviewed-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Damien Le Moal <[email protected]>
2021-11-29rt2x00: do not mark device gone on EPROTO errors during startStanislaw Gruszka1-0/+3
As reported by Exuvo is possible that we have lot's of EPROTO errors during device start i.e. firmware load. But after that device works correctly. Hence marking device gone by few EPROTO errors done by commit e383c70474db ("rt2x00: check number of EPROTO errors") caused regression - Exuvo device stop working after kernel update. To fix disable the check during device start. Link: https://lore.kernel.org/linux-wireless/[email protected]/ Reported-and-tested-by: Exuvo <[email protected]> Fixes: e383c70474db ("rt2x00: check number of EPROTO errors") Cc: [email protected] Signed-off-by: Stanislaw Gruszka <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-11-29drm/virtio: use drm_poll(..) instead of virtio_gpu_poll(..)Gurchetan Singh1-41/+1
With the use of dummy events, we can drop virtgpu specific behavior. Fixes: cd7f5ca33585 ("drm/virtio: implement context init: add virtio_gpu_fence_event") Reported-by: Daniel Vetter <[email protected]> Signed-off-by: Gurchetan Singh <[email protected]> Reviewed-by: Daniel Vetter <[email protected]> Link: http://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Gerd Hoffmann <[email protected]>
2021-11-29drm/virtgpu api: define a dummy fence signaled eventGurchetan Singh3-2/+8
The current virtgpu implementation of poll(..) drops events when VIRTGPU_CONTEXT_PARAM_POLL_RINGS_MASK is enabled (otherwise it's like a normal DRM driver). This is because paravirtualized userspaces receives responses in a buffer of type BLOB_MEM_GUEST, not by read(..). To be in line with other DRM drivers and avoid specialized behavior, it is possible to define a dummy event for virtgpu. Paravirtualized userspace will now have to call read(..) on the DRM fd to receive the dummy event. Fixes: b10790434cf2 ("drm/virtgpu api: create context init feature") Reported-by: Daniel Vetter <[email protected]> Signed-off-by: Gurchetan Singh <[email protected]> Reviewed-by: Daniel Vetter <[email protected]> Link: http://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Gerd Hoffmann <[email protected]>
2021-11-29i2c: cbus-gpio: set atomic transfer callbackAaro Koskinen1-2/+3
CBUS transfers have always been atomic, but after commit 63b96983a5dd ("i2c: core: introduce callbacks for atomic transfers") we started to see warnings during e.g. poweroff as the atomic callback is not explicitly set. Fix that. Fixes the following WARNING seen during Nokia N810 power down: [ 786.570617] reboot: Power down [ 786.573913] ------------[ cut here ]------------ [ 786.578826] WARNING: CPU: 0 PID: 672 at drivers/i2c/i2c-core.h:40 i2c_smbus_xfer+0x100/0x110 [ 786.587799] No atomic I2C transfer handler for 'i2c-2' Fixes: 63b96983a5dd ("i2c: core: introduce callbacks for atomic transfers") Signed-off-by: Aaro Koskinen <[email protected]> Signed-off-by: Wolfram Sang <[email protected]>
2021-11-29s390/pci: move pseudo-MMIO to prevent MIO overlapNiklas Schnelle1-3/+4
When running without MIO support, with pci=nomio or for devices which are not MIO-capable the zPCI subsystem generates pseudo-MMIO addresses to allow access to PCI BARs via MMIO based Linux APIs even though the platform uses function handles and BAR numbers. This is done by stashing an index into our global IOMAP array which contains the function handle in the 16 most significant bits of the addresses returned by ioremap() always setting the most significant bit. On the other hand the MIO addresses assigned by the platform for use, while requiring special instructions, allow PCI access with virtually mapped physical addresses. Now the problem is that these MIO addresses and our own pseudo-MMIO addresses may overlap, while functionally this would not be a problem by itself this overlap is detected by common code as both address types are added as resources in the iomem_resource tree. This leads to the overlapping resource claim of either the MIO capable or non-MIO capable devices with being rejected. Since PCI is tightly coupled to the use of the iomem_resource tree, see for example the code for request_mem_region(), we can't reasonably get rid of the overlap being detected by keeping our pseudo-MMIO addresses out of the iomem_resource tree. Instead let's move the range used by our own pseudo-MMIO addresses by starting at (1UL << 62) and only using addresses below (1UL << 63) thus avoiding the range currently used for MIO addresses. Fixes: c7ff0e918a7c ("s390/pci: deal with devices that have no support for MIO instructions") Cc: [email protected] # 5.3+ Reviewed-by: Pierre Morel <[email protected]> Signed-off-by: Niklas Schnelle <[email protected]> Signed-off-by: Heiko Carstens <[email protected]>
2021-11-29ALSA: hda/cs8409: Set PMSG_ON earlier inside cs8409 driverStefan Binding2-0/+14
For cs8409, it is required to run Jack Detect on resume. Jack Detect on cs8409+cs42l42 requires an interrupt from cs42l42 to be sent to cs8409 which is propogated to the driver via an unsolicited event. However, the hda_codec drops unsolicited events if the power_state is not set to PMSG_ON. Which is set at the end of the resume call. This means there is a race condition between setting power_state to PMSG_ON and receiving the interrupt. To solve this, we can add an API to set the power_state earlier and call that before we start Jack Detect. This does not cause issues, since we know inside our driver that we are already initialized, and ready to handle the unsolicited events. Signed-off-by: Stefan Binding <[email protected]> Signed-off-by: Vitaly Rodionov <[email protected]> Cc: <[email protected]> # v5.15+ Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2021-11-28Linux 5.16-rc3Linus Torvalds1-1/+1
2021-11-28Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds9-76/+9
Pull vhost,virtio,vdpa bugfixes from Michael Tsirkin: "Misc fixes all over the place. Revert of virtio used length validation series: the approach taken does not seem to work, breaking too many guests in the process. We'll need to do length validation using some other approach" [ This merge also ends up reverting commit f7a36b03a732 ("vsock/virtio: suppress used length validation"), which came in through the networking tree in the meantime, and was part of that whole used length validation series - Linus ] * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: vdpa_sim: avoid putting an uninitialized iova_domain vhost-vdpa: clean irqs before reseting vdpa device virtio-blk: modify the value type of num in virtio_queue_rq() vhost/vsock: cleanup removing `len` variable vhost/vsock: fix incorrect used length reported to the guest Revert "virtio_ring: validate used buffer length" Revert "virtio-net: don't let virtio core to validate used length" Revert "virtio-blk: don't let virtio core to validate used length" Revert "virtio-scsi: don't let virtio core to validate used buffer length"
2021-11-28Merge tag 'x86-urgent-2021-11-28' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 build fix from Thomas Gleixner: "A single fix for a missing __init annotation of prepare_command_line()" * tag 'x86-urgent-2021-11-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/boot: Mark prepare_command_line() __init
2021-11-28Merge tag 'sched-urgent-2021-11-28' of ↵Linus Torvalds2-4/+7
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fix from Thomas Gleixner: "A single scheduler fix to ensure that there is no stale KASAN shadow state left on the idle task's stack when a CPU is brought up after it was brought down before" * tag 'sched-urgent-2021-11-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/scs: Reset task stack state in bringup_cpu()
2021-11-28Merge tag 'perf-urgent-2021-11-28' of ↵Linus Torvalds1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fix from Thomas Gleixner: "A single fix for perf to prevent it from sending SIGTRAP to another task from a trace point event as it's not possible to deliver a synchronous signal to a different task from there" * tag 'perf-urgent-2021-11-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf: Ignore sigtrap for tracepoints destined for other tasks
2021-11-28Merge tag 'locking-urgent-2021-11-28' of ↵Linus Torvalds1-93/+89
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking fixes from Thomas Gleixner: "Two regression fixes for reader writer semaphores: - Plug a race in the lock handoff which is caused by inconsistency of the reader and writer path and can lead to corruption of the underlying counter. - down_read_trylock() is suboptimal when the lock is contended and multiple readers trylock concurrently. That's due to the initial value being read non-atomically which results in at least two compare exchange loops. Making the initial readout atomic reduces this significantly. Whith 40 readers by 11% in a benchmark which enforces contention on mmap_sem" * tag 'locking-urgent-2021-11-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/rwsem: Optimize down_read_trylock() under highly contended case locking/rwsem: Make handoff bit handling more consistent
2021-11-28Merge tag 'trace-v5.16-rc2-3' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull another tracing fix from Steven Rostedt: "Fix the fix of pid filtering The setting of the pid filtering flag tested the "trace only this pid" case twice, and ignored the "trace everything but this pid" case. The 5.15 kernel does things a little differently due to the new sparse pid mask introduced in 5.16, and as the bug was discovered running the 5.15 kernel, and the first fix was initially done for that kernel, that fix handled both cases (only pid and all but pid), but the forward port to 5.16 created this bug" * tag 'trace-v5.16-rc2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Test the 'Do not trace this pid' case in create event
2021-11-28Merge tag 'iommu-fixes-v5.16-rc2' of ↵Linus Torvalds5-17/+10
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu fixes from Joerg Roedel: - Intel VT-d fixes: - Remove unused PASID_DISABLED - Fix RCU locking - Fix for the unmap_pages call-back - Rockchip RK3568 address mask fix - AMD IOMMUv2 log message clarification * tag 'iommu-fixes-v5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/vt-d: Fix unmap_pages support iommu/vt-d: Fix an unbalanced rcu_read_lock/rcu_read_unlock() iommu/rockchip: Fix PAGE_DESC_HI_MASKs for RK3568 iommu/amd: Clarify AMD IOMMUv2 initialization messages iommu/vt-d: Remove unused PASID_DISABLED
2021-11-27Merge tag '5.16-rc2-ksmbd-fixes' of git://git.samba.org/ksmbdLinus Torvalds2-18/+22
Pull ksmbd fixes from Steve French: "Five ksmbd server fixes, four of them for stable: - memleak fix - fix for default data stream on filesystems that don't support xattr - error logging fix - session setup fix - minor doc cleanup" * tag '5.16-rc2-ksmbd-fixes' of git://git.samba.org/ksmbd: ksmbd: fix memleak in get_file_stream_info() ksmbd: contain default data stream even if xattr is empty ksmbd: downgrade addition info error msg to debug in smb2_get_info_sec() docs: filesystem: cifs: ksmbd: Fix small layout issues ksmbd: Fix an error handling path in 'smb2_sess_setup()'
2021-11-27vmxnet3: Use generic Kconfig option for page size limitGuenter Roeck1-3/+1
Use the architecture independent Kconfig option PAGE_SIZE_LESS_THAN_64KB to indicate that VMXNET3 requires a page size smaller than 64kB. Signed-off-by: Guenter Roeck <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2021-11-27fs: ntfs: Limit NTFS_RW to page sizes smaller than 64kGuenter Roeck1-0/+1
NTFS_RW code allocates page size dependent arrays on the stack. This results in build failures if the page size is 64k or larger. fs/ntfs/aops.c: In function 'ntfs_write_mst_block': fs/ntfs/aops.c:1311:1: error: the frame size of 2240 bytes is larger than 2048 bytes Since commit f22969a66041 ("powerpc/64s: Default to 64K pages for 64 bit book3s") this affects ppc:allmodconfig builds, but other architectures supporting page sizes of 64k or larger are also affected. Increasing the maximum frame size for affected architectures just to silence this error does not really help. The frame size would have to be set to a really large value for 256k pages. Also, a large frame size could potentially result in stack overruns in this code and elsewhere and is therefore not desirable. Make NTFS_RW dependent on page sizes smaller than 64k instead. Signed-off-by: Guenter Roeck <[email protected]> Cc: Anton Altaparmakov <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.