aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2022-06-28platform/x86: thinkpad_acpi: do not use PSC mode on Intel platformsMark Pearson1-0/+5
PSC platform profile mode is only supported on Linux for AMD platforms. Some older Intel platforms (e.g T490) are advertising it's capability as Windows uses it - but on Linux we should only be using MMC profile for Intel systems. Add a check to prevent it being enabled incorrectly. Signed-off-by: Mark Pearson <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Hans de Goede <[email protected]> Signed-off-by: Hans de Goede <[email protected]>
2022-06-28platform/x86: thinkpad-acpi: profile capabilities as integerMark Pearson1-27/+18
Currently the active mode (PSC/MMC) is stored in an enum and queried throughout the driver. Other driver changes will enumerate additional submodes that are relevant to be tracked, so instead track PSC/MMC in a single integer variable. Co-developed-by: Mario Limonciello <[email protected]> Signed-off-by: Mario Limonciello <[email protected]> Signed-off-by: Mark Pearson <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Hans de Goede <[email protected]> Signed-off-by: Hans de Goede <[email protected]>
2022-06-28platform/x86: panasonic-laptop: filter out duplicate volume up/down/mute ↵Hans de Goede2-0/+42
keypresses On some Panasonic models the volume up/down/mute keypresses get reported both through the Panasonic ACPI HKEY interface as well as through the atkbd device. Filter out the atkbd scan-codes for these to avoid reporting presses twice. Note normally we would leave the filtering of these to userspace by mapping the scan-codes to KEY_UNKNOWN through /lib/udev/hwdb.d/60-keyboard.hwdb. However in this case that would cause regressions since we were filtering the Panasonic ACPI HKEY events before, so filter these in the kernel. Fixes: ed83c9171829 ("platform/x86: panasonic-laptop: Resolve hotkey double trigger bug") Reported-and-tested-by: Stefan Seyfried <[email protected]> Reported-and-tested-by: Kenneth Chan <[email protected]> Signed-off-by: Hans de Goede <[email protected]> Reviewed-by: Andy Shevchenko <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-06-28platform/x86: panasonic-laptop: don't report duplicate brightness key-pressesHans de Goede2-0/+9
The brightness key-presses might also get reported by the ACPI video bus, check for this and in this case don't report the presses to avoid reporting 2 presses for a single key-press. Fixes: ed83c9171829 ("platform/x86: panasonic-laptop: Resolve hotkey double trigger bug") Reported-and-tested-by: Stefan Seyfried <[email protected]> Reported-and-tested-by: Kenneth Chan <[email protected]> Signed-off-by: Hans de Goede <[email protected]> Reviewed-by: Andy Shevchenko <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-06-28platform/x86: panasonic-laptop: revert "Resolve hotkey double trigger bug"Hans de Goede1-6/+2
In hindsight blindly throwing away most of the key-press events is not a good idea. So revert commit ed83c9171829 ("platform/x86: panasonic-laptop: Resolve hotkey double trigger bug"). Fixes: ed83c9171829 ("platform/x86: panasonic-laptop: Resolve hotkey double trigger bug") Reported-and-tested-by: Stefan Seyfried <[email protected]> Reported-and-tested-by: Kenneth Chan <[email protected]> Signed-off-by: Hans de Goede <[email protected]> Reviewed-by: Andy Shevchenko <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-06-28platform/x86: panasonic-laptop: sort includes alphabeticallyHans de Goede1-9/+8
Sort includes alphabetically, small cleanup patch in preparation of further changes. Fixes: ed83c9171829 ("platform/x86: panasonic-laptop: Resolve hotkey double trigger bug") Signed-off-by: Hans de Goede <[email protected]> Reviewed-by: Andy Shevchenko <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-06-28platform/x86: panasonic-laptop: de-obfuscate button codesStefan Seyfried1-5/+11
In the definition of panasonic_keymap[] the key codes are given in decimal, later checks are done with hexadecimal values, which does not help in understanding the code. Additionally use two helper variables to shorten the code and make the logic more obvious. Fixes: ed83c9171829 ("platform/x86: panasonic-laptop: Resolve hotkey double trigger bug") Signed-off-by: Stefan Seyfried <[email protected]> Reviewed-by: Hans de Goede <[email protected]> Signed-off-by: Hans de Goede <[email protected]> Reviewed-by: Andy Shevchenko <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-06-28ACPI: video: Change how we determine if brightness key-presses are handledHans de Goede1-7/+6
Some systems have an ACPI video bus but not ACPI video devices with backlight capability. On these devices brightness key-presses are (logically) not reported through the ACPI video bus. Change how acpi_video_handles_brightness_key_presses() determines if brightness key-presses are handled by the ACPI video driver to avoid vendor specific drivers/platform/x86 drivers filtering out their brightness key-presses even though they are the only ones reporting these presses. Fixes: ed83c9171829 ("platform/x86: panasonic-laptop: Resolve hotkey double trigger bug") Reported-and-tested-by: Stefan Seyfried <[email protected]> Reported-and-tested-by: Kenneth Chan <[email protected]> Signed-off-by: Hans de Goede <[email protected]> Acked-by: Rafael J. Wysocki <[email protected]> Reviewed-by: Andy Shevchenko <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-06-28tools headers UAPI: Sync linux/kvm.h with the kernel sourcesArnaldo Carvalho de Melo1-2/+52
To pick the changes in: bfbab44568779e16 ("KVM: arm64: Implement PSCI SYSTEM_SUSPEND") 7b33a09d036ffd9a ("KVM: arm64: Add support for userspace to suspend a vCPU") ffbb61d09fc56c85 ("KVM: x86: Accept KVM_[GS]ET_TSC_KHZ as a VM ioctl.") 661a20fab7d156cf ("KVM: x86/xen: Advertise and document KVM_XEN_HVM_CONFIG_EVTCHN_SEND") fde0451be8fb3208 ("KVM: x86/xen: Support per-vCPU event channel upcall via local APIC") 28d1629f751c4a5f ("KVM: x86/xen: Kernel acceleration for XENVER_version") 536395260582be74 ("KVM: x86/xen: handle PV timers oneshot mode") 942c2490c23f2800 ("KVM: x86/xen: Add KVM_XEN_VCPU_ATTR_TYPE_VCPU_ID") 2fd6df2f2b47d430 ("KVM: x86/xen: intercept EVTCHNOP_send from guests") 35025735a79eaa89 ("KVM: x86/xen: Support direct injection of event channel events") That automatically adds support for this new ioctl: $ tools/perf/trace/beauty/kvm_ioctl.sh > before $ cp include/uapi/linux/kvm.h tools/include/uapi/linux/kvm.h $ tools/perf/trace/beauty/kvm_ioctl.sh > after $ diff -u before after --- before 2022-06-28 12:13:07.281150509 -0300 +++ after 2022-06-28 12:13:16.423392896 -0300 @@ -98,6 +98,7 @@ [0xcc] = "GET_SREGS2", [0xcd] = "SET_SREGS2", [0xce] = "GET_STATS_FD", + [0xd0] = "XEN_HVM_EVTCHN_SEND", [0xe0] = "CREATE_DEVICE", [0xe1] = "SET_DEVICE_ATTR", [0xe2] = "GET_DEVICE_ATTR", $ This silences these perf build warning: Warning: Kernel ABI header at 'tools/include/uapi/linux/kvm.h' differs from latest version at 'include/uapi/linux/kvm.h' diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h Cc: Adrian Hunter <[email protected]> Cc: David Woodhouse <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Joao Martins <[email protected]> Cc: Marc Zyngier <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Oliver Upton <[email protected]> Cc: Paolo Bonzini <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-06-28Merge tag 'cpufreq-arm-fixes-5.19-rc5' of ↵Rafael J. Wysocki4-0/+12
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm Pull cpufreq ARM fixes for 5.19-rc5 from Viresh Kumar: - Fix missing of_node_put for qoriq and pmac32 driver (Liang He). - Fix issues around throttle interrupt for qcom driver (Stephen Boyd). - Add MT8186 to cpufreq-dt-platdev blocklist (AngeloGioacchino Del Regno). * tag 'cpufreq-arm-fixes-5.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: cpufreq: Add MT8186 to cpufreq-dt-platdev blocklist cpufreq: pmac32-cpufreq: Fix refcount leak bug cpufreq: qcom-hw: Don't do lmh things without a throttle interrupt drivers: cpufreq: Add missing of_node_put() in qoriq-cpufreq.c
2022-06-28perf bpf: 8 byte align bpil dataIan Rogers1-3/+2
bpil data is accessed assuming 64-bit alignment resulting in undefined behavior as the data is just byte aligned. With an -fsanitize=undefined build the following errors are observed: $ sudo perf record -a sleep 1 util/bpf-event.c:310:22: runtime error: load of misaligned address 0x55f61084520f for type '__u64', which requires 8 byte alignment 0x55f61084520f: note: pointer points here a8 fe ff ff 3c 51 d3 c0 ff ff ff ff 04 84 d3 c0 ff ff ff ff d8 aa d3 c0 ff ff ff ff a4 c0 d3 c0 ^ util/bpf-event.c:311:20: runtime error: load of misaligned address 0x55f61084522f for type '__u32', which requires 4 byte alignment 0x55f61084522f: note: pointer points here ff ff ff ff c7 17 00 00 f1 02 00 00 1f 04 00 00 58 04 00 00 00 00 00 00 0f 00 00 00 63 02 00 00 ^ util/bpf-event.c:198:33: runtime error: member access within misaligned address 0x55f61084523f for type 'const struct bpf_func_info', which requires 4 byte alignment 0x55f61084523f: note: pointer points here 58 04 00 00 00 00 00 00 0f 00 00 00 63 02 00 00 3b 00 00 00 ab 02 00 00 44 00 00 00 14 03 00 00 Correct this by rouding up the data sizes and aligning the pointers. Signed-off-by: Ian Rogers <[email protected]> Acked-by: Andrii Nakryiko <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Alexei Starovoitov <[email protected]> Cc: Daniel Borkmann <[email protected]> Cc: Dave Marchevsky <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: John Fastabend <[email protected]> Cc: KP Singh <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Martin KaFai Lau <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Quentin Monnet <[email protected]> Cc: Song Liu <[email protected]> Cc: Stephane Eranian <[email protected]> Cc: Yonghong Song <[email protected]> Cc: [email protected] Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-06-28tools kvm headers arm64: Update KVM headers from the kernel sourcesArnaldo Carvalho de Melo1-0/+36
To pick the changes from: 2cde51f1e10f2600 ("KVM: arm64: Hide KVM_REG_ARM_*_BMAP_BIT_COUNT from userspace") b22216e1a617ca55 ("KVM: arm64: Add vendor hypervisor firmware register") 428fd6788d4d0e0d ("KVM: arm64: Add standard hypervisor firmware register") 05714cab7d63b189 ("KVM: arm64: Setup a framework for hypercall bitmap firmware registers") 18f3976fdb5da2ba ("KVM: arm64: uapi: Add kvm_debug_exit_arch.hsr_high") a5905d6af492ee6a ("KVM: arm64: Allow SMCCC_ARCH_WORKAROUND_3 to be discovered and migrated") That don't causes any changes in tooling (when built on x86), only addresses this perf build warning: Warning: Kernel ABI header at 'tools/arch/arm64/include/uapi/asm/kvm.h' differs from latest version at 'arch/arm64/include/uapi/asm/kvm.h' diff -u tools/arch/arm64/include/uapi/asm/kvm.h arch/arm64/include/uapi/asm/kvm.h Cc: Adrian Hunter <[email protected]> Cc: Alexandru Elisei <[email protected]> Cc: Catalin Marinas <[email protected]> Cc: Ian Rogers <[email protected]> Cc: James Morse <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Marc Zyngier <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Raghavendra Rao Ananta <[email protected]> Link: https://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-06-28perf offcpu: Accept allowed sample types onlyNamhyung Kim3-1/+24
As offcpu-time event is synthesized at the end, it could not get the all the sample info. Define OFFCPU_SAMPLE_TYPES for allowed ones and mask out others in evsel__config() to prevent parse errors. Because perf sample parsing assumes a specific ordering with the sample types, setting unsupported one would make it fail to read data like perf record -d/--data. Fixes: edc41a1099c2d08c ("perf record: Enable off-cpu analysis with BPF") Signed-off-by: Namhyung Kim <[email protected]> Cc: Blake Jones <[email protected]> Cc: Hao Luo <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Milian Wolff <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Song Liu <[email protected]> Cc: [email protected] Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-06-28perf offcpu: Fix build failure on old kernelsNamhyung Kim1-6/+14
Old kernels have a 'struct task_struct' which contains a "state" field and newer kernels have "__state" instead. While the get_task_state() in the BPF code handles that in some way, it assumed the current kernel has the new definition and it caused a build error on old kernels. We should not assume anything and access them carefully. Do not use 'task struct' directly access it instead using new and old definitions in a row. Fixes: edc41a1099c2d08c ("perf record: Enable off-cpu analysis with BPF") Reported-by: Ian Rogers <[email protected]> Signed-off-by: Namhyung Kim <[email protected]> Cc: Blake Jones <[email protected]> Cc: Hao Luo <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Milian Wolff <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Song Liu <[email protected]> Cc: [email protected] Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-06-28linux/dim: Fix divide by 0 in RDMA DIMTao Liu1-1/+1
Fix a divide 0 error in rdma_dim_stats_compare() when prev->cpe_ratio == 0. CallTrace: Hardware name: H3C R4900 G3/RS33M2C9S, BIOS 2.00.37P21 03/12/2020 task: ffff880194b78000 task.stack: ffffc90006714000 RIP: 0010:backport_rdma_dim+0x10e/0x240 [mlx_compat] RSP: 0018:ffff880c10e83ec0 EFLAGS: 00010202 RAX: 0000000000002710 RBX: ffff88096cd7f780 RCX: 0000000000000064 RDX: 0000000000000000 RSI: 0000000000000002 RDI: 0000000000000001 RBP: 0000000000000001 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 000000001d7c6c09 R13: ffff88096cd7f780 R14: ffff880b174fe800 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff880c10e80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000a0965b00 CR3: 000000000200a003 CR4: 00000000007606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <IRQ> ib_poll_handler+0x43/0x80 [ib_core] irq_poll_softirq+0xae/0x110 __do_softirq+0xd1/0x28c irq_exit+0xde/0xf0 do_IRQ+0x54/0xe0 common_interrupt+0x8f/0x8f </IRQ> ? cpuidle_enter_state+0xd9/0x2a0 ? cpuidle_enter_state+0xc7/0x2a0 ? do_idle+0x170/0x1d0 ? cpu_startup_entry+0x6f/0x80 ? start_secondary+0x1b9/0x210 ? secondary_startup_64+0xa5/0xb0 Code: 0f 87 e1 00 00 00 8b 4c 24 14 44 8b 43 14 89 c8 4d 63 c8 44 29 c0 99 31 d0 29 d0 31 d2 48 98 48 8d 04 80 48 8d 04 80 48 c1 e0 02 <49> f7 f1 48 83 f8 0a 0f 86 c1 00 00 00 44 39 c1 7f 10 48 89 df RIP: backport_rdma_dim+0x10e/0x240 [mlx_compat] RSP: ffff880c10e83ec0 Fixes: f4915455dcf0 ("linux/dim: Implement RDMA adaptive moderation (DIM)") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Tao Liu <[email protected]> Reviewed-by: Max Gurtovoy <[email protected]> Acked-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2022-06-28net: bonding: fix possible NULL deref in rlb codeEric Dumazet1-1/+1
syzbot has two reports involving the same root cause. bond_alb_initialize() must not set bond->alb_info.rlb_enabled if a memory allocation error is detected. Report 1: general protection fault, probably for non-canonical address 0xdffffc0000000002: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017] CPU: 0 PID: 12276 Comm: kworker/u4:10 Not tainted 5.19.0-rc3-syzkaller-00132-g3b89b511ea0c #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: netns cleanup_net RIP: 0010:rlb_clear_slave+0x10e/0x690 drivers/net/bonding/bond_alb.c:393 Code: 8e fc 83 fb ff 0f 84 74 02 00 00 e8 cc 2a 8e fc 48 8b 44 24 08 89 dd 48 c1 e5 06 4c 8d 34 28 49 8d 7e 14 48 89 f8 48 c1 e8 03 <42> 0f b6 14 20 48 89 f8 83 e0 07 83 c0 03 38 d0 7c 08 84 d2 0f 85 RSP: 0018:ffffc90018a8f678 EFLAGS: 00010203 RAX: 0000000000000002 RBX: 0000000000000000 RCX: 0000000000000000 RDX: ffff88803375bb00 RSI: ffffffff84ec4ac4 RDI: 0000000000000014 RBP: 0000000000000000 R08: 0000000000000005 R09: 00000000ffffffff R10: 0000000000000000 R11: 0000000000000000 R12: dffffc0000000000 R13: ffff8880ac889000 R14: 0000000000000000 R15: ffff88815a668c80 FS: 0000000000000000(0000) GS:ffff8880b9a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005597077e10b0 CR3: 0000000026668000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> bond_alb_deinit_slave+0x43c/0x6b0 drivers/net/bonding/bond_alb.c:1663 __bond_release_one.cold+0x383/0xd53 drivers/net/bonding/bond_main.c:2370 bond_slave_netdev_event drivers/net/bonding/bond_main.c:3778 [inline] bond_netdev_event+0x993/0xad0 drivers/net/bonding/bond_main.c:3889 notifier_call_chain+0xb5/0x200 kernel/notifier.c:87 call_netdevice_notifiers_info+0xb5/0x130 net/core/dev.c:1945 call_netdevice_notifiers_extack net/core/dev.c:1983 [inline] call_netdevice_notifiers net/core/dev.c:1997 [inline] unregister_netdevice_many+0x948/0x18b0 net/core/dev.c:10839 default_device_exit_batch+0x449/0x590 net/core/dev.c:11333 ops_exit_list+0x125/0x170 net/core/net_namespace.c:167 cleanup_net+0x4ea/0xb00 net/core/net_namespace.c:594 process_one_work+0x996/0x1610 kernel/workqueue.c:2289 worker_thread+0x665/0x1080 kernel/workqueue.c:2436 kthread+0x2e9/0x3a0 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:302 </TASK> Report 2: general protection fault, probably for non-canonical address 0xdffffc0000000006: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000030-0x0000000000000037] CPU: 1 PID: 5206 Comm: syz-executor.1 Not tainted 5.18.0-syzkaller-12108-g58f9d52ff689 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:rlb_req_update_slave_clients+0x109/0x2f0 drivers/net/bonding/bond_alb.c:502 Code: 5d 18 8f fc 41 80 3e 00 0f 85 a5 01 00 00 89 d8 48 c1 e0 06 49 03 84 24 68 01 00 00 48 8d 78 30 49 89 c7 48 89 fa 48 c1 ea 03 <80> 3c 2a 00 0f 85 98 01 00 00 4d 39 6f 30 75 83 e8 22 18 8f fc 49 RSP: 0018:ffffc9000300ee80 EFLAGS: 00010206 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffc90016c11000 RDX: 0000000000000006 RSI: ffffffff84eb6bf3 RDI: 0000000000000030 RBP: dffffc0000000000 R08: 0000000000000005 R09: 00000000ffffffff R10: 0000000000000000 R11: 0000000000000000 R12: ffff888027c80c80 R13: ffff88807d7ff800 R14: ffffed1004f901bd R15: 0000000000000000 FS: 00007f6f46c58700(0000) GS:ffff8880b9b00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020010000 CR3: 00000000516cc000 CR4: 00000000003506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> alb_fasten_mac_swap+0x886/0xa80 drivers/net/bonding/bond_alb.c:1070 bond_alb_handle_active_change+0x624/0x1050 drivers/net/bonding/bond_alb.c:1765 bond_change_active_slave+0xfa1/0x29b0 drivers/net/bonding/bond_main.c:1173 bond_select_active_slave+0x23f/0xa50 drivers/net/bonding/bond_main.c:1253 bond_enslave+0x3b34/0x53b0 drivers/net/bonding/bond_main.c:2159 do_set_master+0x1c8/0x220 net/core/rtnetlink.c:2577 rtnl_newlink_create net/core/rtnetlink.c:3380 [inline] __rtnl_newlink+0x13ac/0x17e0 net/core/rtnetlink.c:3580 rtnl_newlink+0x64/0xa0 net/core/rtnetlink.c:3593 rtnetlink_rcv_msg+0x43a/0xc90 net/core/rtnetlink.c:6089 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2501 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline] netlink_unicast+0x543/0x7f0 net/netlink/af_netlink.c:1345 netlink_sendmsg+0x917/0xe10 net/netlink/af_netlink.c:1921 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:734 ____sys_sendmsg+0x6eb/0x810 net/socket.c:2492 ___sys_sendmsg+0xf3/0x170 net/socket.c:2546 __sys_sendmsg net/socket.c:2575 [inline] __do_sys_sendmsg net/socket.c:2584 [inline] __se_sys_sendmsg net/socket.c:2582 [inline] __x64_sys_sendmsg+0x132/0x220 net/socket.c:2582 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 RIP: 0033:0x7f6f45a89109 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f6f46c58168 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007f6f45b9c030 RCX: 00007f6f45a89109 RDX: 0000000000000000 RSI: 0000000020000080 RDI: 0000000000000006 RBP: 00007f6f45ae308d R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007ffed99029af R14: 00007f6f46c58300 R15: 0000000000022000 </TASK> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: syzbot <[email protected]> Signed-off-by: Eric Dumazet <[email protected]> Cc: Jay Vosburgh <[email protected]> Cc: Veaceslav Falico <[email protected]> Cc: Andy Gospodarek <[email protected]> Acked-by: Jay Vosburgh <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2022-06-28fanotify: refine the validation checks on non-dir inode maskAmir Goldstein2-15/+23
Commit ceaf69f8eadc ("fanotify: do not allow setting dirent events in mask of non-dir") added restrictions about setting dirent events in the mask of a non-dir inode mark, which does not make any sense. For backward compatibility, these restictions were added only to new (v5.17+) APIs. It also does not make any sense to set the flags FAN_EVENT_ON_CHILD or FAN_ONDIR in the mask of a non-dir inode. Add these flags to the dir-only restriction of the new APIs as well. Move the check of the dir-only flags for new APIs into the helper fanotify_events_supported(), which is only called for FAN_MARK_ADD, because there is no need to error on an attempt to remove the dir-only flags from non-dir inode. Fixes: ceaf69f8eadc ("fanotify: do not allow setting dirent events in mask of non-dir") Link: https://lore.kernel.org/linux-fsdevel/[email protected]/ Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Amir Goldstein <[email protected]> Signed-off-by: Jan Kara <[email protected]>
2022-06-28cpufreq: Add MT8186 to cpufreq-dt-platdev blocklistAngeloGioacchino Del Regno1-0/+1
This SoC shall use the mediatek-cpufreq driver, or the system will crash upon any clock scaling request: add it to the cpufreq-dt-platdev blocklist. Fixes: 39b360102f3a ("cpufreq: mediatek: Add support for MT8186") Signed-off-by: AngeloGioacchino Del Regno <[email protected]> Reviewed-by: Matthias Brugger <[email protected]> Signed-off-by: Viresh Kumar <[email protected]>
2022-06-28cpufreq: pmac32-cpufreq: Fix refcount leak bugLiang He1-0/+4
In pmac_cpufreq_init_MacRISC3(), we need to add corresponding of_node_put() for the three node pointers whose refcount have been incremented by of_find_node_by_name(). Signed-off-by: Liang He <[email protected]> Signed-off-by: Viresh Kumar <[email protected]>
2022-06-28cpufreq: qcom-hw: Don't do lmh things without a throttle interruptStephen Boyd1-0/+6
Offlining cpu6 and cpu7 and then onlining cpu6 hangs on sc7180-trogdor-lazor because the throttle interrupt doesn't exist. Similarly, things go sideways when suspend/resume runs. That's because the qcom_cpufreq_hw_cpu_online() and qcom_cpufreq_hw_lmh_exit() functions are calling genirq APIs with an interrupt value of '-6', i.e. -ENXIO, and that isn't good. Check the value of the throttle interrupt like we already do in other functions in this file and bail out early from lmh code to fix the hang. Reported-by: Rob Clark <[email protected]> Cc: Vladimir Zapolskiy <[email protected]> Cc: Bjorn Andersson <[email protected]> Cc: Dmitry Baryshkov <[email protected]> Fixes: a1eb080a0447 ("cpufreq: qcom-hw: provide online/offline operations") Signed-off-by: Stephen Boyd <[email protected]> Reviewed-by: Vladimir Zapolskiy <[email protected]> Signed-off-by: Viresh Kumar <[email protected]>
2022-06-28drivers: cpufreq: Add missing of_node_put() in qoriq-cpufreq.cLiang He1-0/+1
In qoriq_cpufreq_probe(), of_find_matching_node() will return a node pointer with refcount incremented. We should use of_node_put() when it is not used anymore. Fixes: 157f527639da ("cpufreq: qoriq: convert to a platform driver") [ Viresh: Fixed Author's name in commit log ] Signed-off-by: Liang He <[email protected]> Signed-off-by: Viresh Kumar <[email protected]>
2022-06-27ipv6: take care of disable_policy when restoring routesNicolas Dichtel2-5/+8
When routes corresponding to addresses are restored by fixup_permanent_addr(), the dst_nopolicy parameter was not set. The typical use case is a user that configures an address on a down interface and then put this interface up. Let's take care of this flag in addrconf_f6i_alloc(), so that every callers benefit ont it. CC: [email protected] CC: David Forster <[email protected]> Fixes: df789fe75206 ("ipv6: Provide ipv6 version of "disable_policy" sysctl") Reported-by: Siwar Zitouni <[email protected]> Signed-off-by: Nicolas Dichtel <[email protected]> Reviewed-by: David Ahern <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-06-27net: usb: asix: do not force pause frames supportOleksij Rempel1-2/+1
We should respect link partner capabilities and not force flow control support on every link. Even more, in current state the MAC driver do not advertises pause support so we should not keep flow control enabled at all. Fixes: e532a096be0e ("net: usb: asix: ax88772: add phylib support") Reported-by: Anton Lundin <[email protected]> Signed-off-by: Oleksij Rempel <[email protected]> Tested-by: Anton Lundin <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-06-27net: asix: fix "can't send until first packet is send" issueOleksij Rempel1-0/+1
If cable is attached after probe sequence, the usbnet framework would not automatically start processing RX packets except at least one packet was transmitted. On systems with any kind of address auto configuration this issue was not detected, because some packets are send immediately after link state is changed to "running". With this patch we will notify usbnet about link status change provided by the PHYlib. Fixes: e532a096be0e ("net: usb: asix: ax88772: add phylib support") Reported-by: Anton Lundin <[email protected]> Signed-off-by: Oleksij Rempel <[email protected]> Tested-by: Anton Lundin <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-06-27MAINTAINERS: nfc: drop Charles Gorand from NXP-NCIMichael Walle1-2/+1
Mails to Charles get an auto reply, that he is no longer working at Eff'Innov technologies. Drop the entry and mark the driver as orphaned. Signed-off-by: Michael Walle <[email protected]> Acked-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-06-27octeon_ep: use bitwise ANDShreenidhi Shedi1-1/+1
This should be bitwise operator not logical. Fixes: 862cd659a6fb ("octeon_ep: Add driver framework and device initialization") Signed-off-by: Shreenidhi Shedi <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-06-27Merge branch 'notify-user-space-if-any-actions-were-flushed-before-error'Jakub Kicinski2-8/+91
Victor Nogueira says: ==================== Notify user space if any actions were flushed before error This patch series fixes the behaviour of actions flush so that the kernel always notifies user space whenever it deletes actions during a flush operation, even if it didn't flush all the actions. This series also introduces tdc tests to verify this new behaviour. ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-06-27selftests: tc-testing: Add testcases to test new flush behaviourVictor Nogueira1-0/+77
Add tdc test cases to verify new flush behaviour is correct, which do the following: - Try to flush only one action which is being referenced by a filter - Try to flush three actions where the last one (index 3) is being referenced by a filter Signed-off-by: Victor Nogueira <[email protected]> Acked-by: Jamal Hadi Salim <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-06-27net/sched: act_api: Notify user space if any actions were flushed before errorVictor Nogueira1-8/+14
If during an action flush operation one of the actions is still being referenced, the flush operation is aborted and the kernel returns to user space with an error. However, if the kernel was able to flush, for example, 3 actions and failed on the fourth, the kernel will not notify user space that it deleted 3 actions before failing. This patch fixes that behaviour by notifying user space of how many actions were deleted before flush failed and by setting extack with a message describing what happened. Fixes: 55334a5db5cd ("net_sched: act: refuse to remove bound action outside") Signed-off-by: Victor Nogueira <[email protected]> Acked-by: Jamal Hadi Salim <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-06-27epic100: fix use after free on rmmodTong Zhang1-2/+2
epic_close() calls epic_rx() and uses dma buffer, but in epic_remove_one() we already freed the dma buffer. To fix this issue, reorder function calls like in the .probe function. BUG: KASAN: use-after-free in epic_rx+0xa6/0x7e0 [epic100] Call Trace: epic_rx+0xa6/0x7e0 [epic100] epic_close+0xec/0x2f0 [epic100] unregister_netdev+0x18/0x20 epic_remove_one+0xaa/0xf0 [epic100] Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: Yilun Wu <[email protected]> Signed-off-by: Tong Zhang <[email protected]> Reviewed-by: Francois Romieu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-06-27net: tun: stop NAPI when detaching queuesJakub Kicinski1-1/+10
While looking at a syzbot report I noticed the NAPI only gets disabled before it's deleted. I think that user can detach the queue before destroying the device and the NAPI will never be stopped. Fixes: 943170998b20 ("tun: enable NAPI for TUN/TAP driver") Acked-by: Petar Penkov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-06-27scsi: hisi_sas: Limit max hw sectors for v3 HWJohn Garry1-0/+7
If the controller is behind an IOMMU then the IOMMU IOVA caching range can affect performance, as discussed in [0]. Limit the max HW sectors to not exceed this limit. We need to hardcode the value until a proper DMA mapping API is available. [0] https://lore.kernel.org/linux-iommu/[email protected]/ Link: https://lore.kernel.org/r/[email protected] Signed-off-by: John Garry <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2022-06-27dm raid: fix accesses beyond end of raid member arrayHeinz Mauelshagen1-16/+18
On dm-raid table load (using raid_ctr), dm-raid allocates an array rs->devs[rs->raid_disks] for the raid device members. rs->raid_disks is defined by the number of raid metadata and image tupples passed into the target's constructor. In the case of RAID layout changes being requested, that number can be different from the current number of members for existing raid sets as defined in their superblocks. Example RAID layout changes include: - raid1 legs being added/removed - raid4/5/6/10 number of stripes changed (stripe reshaping) - takeover to higher raid level (e.g. raid5 -> raid6) When accessing array members, rs->raid_disks must be used in control loops instead of the potentially larger value in rs->md.raid_disks. Otherwise it will cause memory access beyond the end of the rs->devs array. Fix this by changing code that is prone to out-of-bounds access. Also fix validate_raid_redundancy() to validate all devices that are added. Also, use braces to help clean up raid_iterate_devices(). The out-of-bounds memory accesses was discovered using KASAN. This commit was verified to pass all LVM2 RAID tests (with KASAN enabled). Cc: [email protected] Signed-off-by: Heinz Mauelshagen <[email protected]> Signed-off-by: Mike Snitzer <[email protected]>
2022-06-27drm/msm/gem: Fix error return on fence id alloc failRob Clark1-1/+1
This was a typo, we didn't actually want to return zero. Fixes: a61acbbe9cf8 ("drm/msm: Track "seqno" fences by idr") Signed-off-by: Rob Clark <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Patchwork: https://patchwork.freedesktop.org/patch/491145/ Link: https://lore.kernel.org/r/[email protected]
2022-06-27parisc/unaligned: Fix emulate_ldw() breakageHelge Deller1-1/+1
The commit e8aa7b17fe41 broke the 32-bit load-word unalignment exception handler because it calculated the wrong amount of bits by which the value should be shifted. This patch fixes it. Signed-off-by: Helge Deller <[email protected]> Fixes: e8aa7b17fe41 ("parisc/unaligned: Rewrite inline assembly of emulate_ldw()") Cc: [email protected] # v5.18
2022-06-27Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds12-69/+187
Pull virtio fixes from Michael Tsirkin: "Fixes all over the place, most notably we are disabling IRQ hardening (again!)" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: virtio_ring: make vring_create_virtqueue_split prettier vhost-vdpa: call vhost_vdpa_cleanup during the release virtio_mmio: Restore guest page size on resume virtio_mmio: Add missing PM calls to freeze/restore caif_virtio: fix race between virtio_device_ready() and ndo_open() virtio-net: fix race between ndo_open() and virtio_device_ready() virtio: disable notification hardening by default virtio: Remove unnecessary variable assignments virtio_ring : keep used_wrap_counter in vq->last_used_idx vduse: Tie vduse mgmtdev and its device vdpa/mlx5: Initialize CVQ vringh only once vdpa/mlx5: Update Control VQ callback information
2022-06-27tick/nohz: unexport __init-annotated tick_nohz_full_setup()Masahiro Yamada1-1/+0
EXPORT_SYMBOL and __init is a bad combination because the .init.text section is freed up after the initialization. Hence, modules cannot use symbols annotated __init. The access to a freed symbol may end up with kernel panic. modpost used to detect it, but it had been broken for a decade. Commit 28438794aba4 ("modpost: fix section mismatch check for exported init/exit sections") fixed it so modpost started to warn it again, then this showed up: MODPOST vmlinux.symvers WARNING: modpost: vmlinux.o(___ksymtab_gpl+tick_nohz_full_setup+0x0): Section mismatch in reference from the variable __ksymtab_tick_nohz_full_setup to the function .init.text:tick_nohz_full_setup() The symbol tick_nohz_full_setup is exported and annotated __init Fix this by removing the __init annotation of tick_nohz_full_setup or drop the export. Drop the export because tick_nohz_full_setup() is only called from the built-in code in kernel/sched/isolation.c. Fixes: ae9e557b5be2 ("time: Export tick start/stop functions for rcutorture") Reported-by: Linus Torvalds <[email protected]> Signed-off-by: Masahiro Yamada <[email protected]> Tested-by: Paul E. McKenney <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2022-06-27netfilter: br_netfilter: do not skip all hooks with 0 priorityFlorian Westphal1-3/+18
When br_netfilter module is loaded, skbs may be diverted to the ipv4/ipv6 hooks, just like as if we were routing. Unfortunately, bridge filter hooks with priority 0 may be skipped in this case. Example: 1. an nftables bridge ruleset is loaded, with a prerouting hook that has priority 0. 2. interface is added to the bridge. 3. no tcp packet is ever seen by the bridge prerouting hook. 4. flush the ruleset 5. load the bridge ruleset again. 6. tcp packets are processed as expected. After 1) the only registered hook is the bridge prerouting hook, but its not called yet because the bridge hasn't been brought up yet. After 2), hook order is: 0 br_nf_pre_routing // br_netfilter internal hook 0 chain bridge f prerouting // nftables bridge ruleset The packet is diverted to br_nf_pre_routing. If call-iptables is off, the nftables bridge ruleset is called as expected. But if its enabled, br_nf_hook_thresh() will skip it because it assumes that all 0-priority hooks had been called previously in bridge context. To avoid this, check for the br_nf_pre_routing hook itself, we need to resume directly after it, even if this hook has a priority of 0. Unfortunately, this still results in different packet flow. With this fix, the eval order after in 3) is: 1. br_nf_pre_routing 2. ip(6)tables (if enabled) 3. nftables bridge but after 5 its the much saner: 1. nftables bridge 2. br_nf_pre_routing 3. ip(6)tables (if enabled) Unfortunately I don't see a solution here: It would be possible to move br_nf_pre_routing to a higher priority so that it will be called later in the pipeline, but this also impacts ebtables evaluation order, and would still result in this very ordering problem for all nftables-bridge hooks with the same priority as the br_nf_pre_routing one. Searching back through the git history I don't think this has ever behaved in any other way, hence, no fixes-tag. Reported-by: Radim Hrazdil <[email protected]> Signed-off-by: Florian Westphal <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2022-06-27netfilter: nf_tables: avoid skb access on nf_stolenFlorian Westphal3-29/+55
When verdict is NF_STOLEN, the skb might have been freed. When tracing is enabled, this can result in a use-after-free: 1. access to skb->nf_trace 2. access to skb->mark 3. computation of trace id 4. dump of packet payload To avoid 1, keep a cached copy of skb->nf_trace in the trace state struct. Refresh this copy whenever verdict is != STOLEN. Avoid 2 by skipping skb->mark access if verdict is STOLEN. 3 is avoided by precomputing the trace id. Only dump the packet when verdict is not "STOLEN". Reported-by: Pablo Neira Ayuso <[email protected]> Signed-off-by: Florian Westphal <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2022-06-27netfilter: nft_dynset: restore set element counter when failing to updatePablo Neira Ayuso1-0/+2
This patch fixes a race condition. nft_rhash_update() might fail for two reasons: - Element already exists in the hashtable. - Another packet won race to insert an entry in the hashtable. In both cases, new() has already bumped the counter via atomic_add_unless(), therefore, decrement the set element counter. Fixes: 22fe54d5fefc ("netfilter: nf_tables: add support for dynamic set updates") Signed-off-by: Pablo Neira Ayuso <[email protected]>
2022-06-27drm/i915: tweak the ordering in cpu_write_needs_clflushMatthew Auld1-3/+3
For imported dma-buf objects we leave the object as cache_coherent = 0 across all platforms, which is reasonable given that have no clue what the memory underneath is, and its not like the driver can ever manually clflush the pages anyway (like with i915_gem_clflush_object) for such objects. However on discrete we choose to treat cache_dirty = true as a programmer error, leading to a warning. The simplest fix looks to be to just change the ordering in cpu_write_needs_clflush to prevent ever setting cache_dirty for dma-buf objects on discrete. Fixes: d028a7690d87 ("drm/i915/dmabuf: Fix prime_mmap to work when using LMEM") Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5266 Signed-off-by: Matthew Auld <[email protected]> Cc: Thomas Hellström <[email protected]> Cc: Gwan-gyeong Mun <[email protected]> Reviewed-by: Gwan-gyeong Mun <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit 563aaf4a928def2d36d1b3de0a4b515e2477b4da) Signed-off-by: Jani Nikula <[email protected]>
2022-06-27drm/i915/dgfx: Disable d3cold at gfx root portAnshuman Gupta1-19/+15
Currently i915 disables d3cold for i915 pci dev. This blocks D3 for i915 gfx pci upstream bridge (VSP). Let's disable d3cold at gfx root port to make sure that i915 gfx VSP can transition to D3 to save some power. We don't need to disable/enable d3cold in rpm, s2idle suspend/resume handlers. Disabling/Enabling d3cold at gfx root port in probe/remove phase is sufficient. Fixes: 1a085e23411d ("drm/i915: Disable D3Cold in s2idle and runtime pm") Cc: Rodrigo Vivi <[email protected]> Signed-off-by: Anshuman Gupta <[email protected]> Reviewed-by: Badal Nilawar <[email protected]> Acked-by: Rodrigo Vivi <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit 138c2fca6f408f397ea8fbbbf33203f244d96e01) Signed-off-by: Jani Nikula <[email protected]>
2022-06-27drm/i915/gem: add missing elsekatrinzhou1-2/+3
Add missing else in set_proto_ctx_param() to fix coverity issue. Addresses-Coverity: ("Unused value") Fixes: d4433c7600f7 ("drm/i915/gem: Use the proto-context to handle create parameters (v5)") Suggested-by: Tvrtko Ursulin <[email protected]> Signed-off-by: katrinzhou <[email protected]> [tursulin: fixup alignment] Signed-off-by: Tvrtko Ursulin <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit 7482a65664c16cc88eb84d2b545a1fed887378a1) Signed-off-by: Jani Nikula <[email protected]>
2022-06-27NFSD: restore EINVAL error translation in nfsd_commit()Alexey Khoroshilov1-1/+2
commit 555dbf1a9aac ("nfsd: Replace use of rwsem with errseq_t") incidentally broke translation of -EINVAL to nfserr_notsupp. The patch restores that. Found by Linux Verification Center (linuxtesting.org) with SVACE. Signed-off-by: Alexey Khoroshilov <[email protected]> Fixes: 555dbf1a9aac ("nfsd: Replace use of rwsem with errseq_t") Signed-off-by: Chuck Lever <[email protected]>
2022-06-27platform/x86: ideapad-laptop: Add Ideapad 5 15ITL05 to ↵Hans de Goede1-1/+7
ideapad_dytc_v4_allow_table[] The Ideapad 5 15ITL05 uses DYTC version 4 for platform-profile control. This has been tested successfully with the ideapad-laptop DYTC version 5 code; Add the Ideapad 5 15ITL05 to the ideapad_dytc_v4_allow_table[]. Fixes: 599482c58ebd ("platform/x86: ideapad-laptop: Add platform support for Ideapad 5 Pro 16ACH6-82L5") Link: https://bugzilla.kernel.org/show_bug.cgi?id=213297 Signed-off-by: Hans de Goede <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-06-27platform/x86: ideapad-laptop: Add allow_v4_dytc module parameterHans de Goede1-7/+14
Add an allow_v4_dytc module parameter to allow users to easily test if DYTC version 4 platform-profiles work on their laptop. Fixes: 599482c58ebd ("platform/x86: ideapad-laptop: Add platform support for Ideapad 5 Pro 16ACH6-82L5") Link: https://bugzilla.kernel.org/show_bug.cgi?id=213297 Signed-off-by: Hans de Goede <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-06-27drm/vc4: perfmon: Fix variable dereferenced before checkMaxime Ripard1-3/+6
Commit 30f8c74ca9b7 ("drm/vc4: Warn if some v3d code is run on BCM2711") introduced a check in vc4_perfmon_get() that dereferences a pointer before we checked whether that pointer is valid or not. Let's rework that function a bit to do things in the proper order. Reported-by: kernel test robot <[email protected]> Reported-by: Dan Carpenter <[email protected]> Fixes: 30f8c74ca9b7 ("drm/vc4: Warn if some v3d code is run on BCM2711") Signed-off-by: Maxime Ripard <[email protected]> Reviewed-by: José Expósito <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2022-06-27virtio_ring: make vring_create_virtqueue_split prettierDeming Wang1-1/+1
Add some spaces to vring_alloc_queue(make it look prettier). Signed-off-by: Deming Wang <[email protected]> Message-Id: <[email protected]> Signed-off-by: Michael S. Tsirkin <[email protected]>
2022-06-27vhost-vdpa: call vhost_vdpa_cleanup during the releaseStefano Garzarella1-1/+1
Before commit 3d5698793897 ("vhost-vdpa: introduce asid based IOTLB") we call vhost_vdpa_iotlb_free() during the release to clean all regions mapped in the iotlb. That commit removed vhost_vdpa_iotlb_free() and added vhost_vdpa_cleanup() to do some cleanup, including deleting all mappings, but we forgot to call it in vhost_vdpa_release(). This causes that if an application does not remove all mappings explicitly (or it crashes), the mappings remain in the iotlb and subsequent applications may fail if they map the same addresses. Calling vhost_vdpa_cleanup() also fixes a memory leak since we are not freeing `v->vdev.vqs` during the release from the same commit. Since vhost_vdpa_cleanup() calls vhost_dev_cleanup() we can remove its call from vhost_vdpa_release(). Fixes: 3d5698793897 ("vhost-vdpa: introduce asid based IOTLB") Cc: [email protected] Signed-off-by: Stefano Garzarella <[email protected]> Message-Id: <[email protected]> Signed-off-by: Michael S. Tsirkin <[email protected]> Tested-by: Eugenio Pérez <[email protected]> Acked-by: Jason Wang <[email protected]>
2022-06-27virtio_mmio: Restore guest page size on resumeStephan Gerhold1-0/+3
Virtio devices might lose their state when the VMM is restarted after a suspend to disk (hibernation) cycle. This means that the guest page size register must be restored for the virtio_mmio legacy interface, since otherwise the virtio queues are not functional. This is particularly problematic for QEMU that currently still defaults to using the legacy interface for virtio_mmio. Write the guest page size register again in virtio_mmio_restore() to make legacy virtio_mmio devices work correctly after hibernation. Signed-off-by: Stephan Gerhold <[email protected]> Message-Id: <[email protected]> Signed-off-by: Michael S. Tsirkin <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.