aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2022-11-08ALSA: hda/hdmi - enable runtime pm for more AMD display audioEvan Quan1-0/+3
We are able to power down the GPU and audio via the GPU driver so flag these asics as supporting runtime pm. Signed-off-by: Evan Quan <[email protected]> Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2022-11-08ALSA: usb-audio: Remove redundant workaround for Roland quirkTakashi Iwai1-41/+3
The recent fix for the delayed card registration made the current workaround for QUIRK_AUTODETECT superfluous, since the card registration itself is delayed until the last interface probe. This patch drops the redundant workaround in create_autodetect_quirks() for simplification. Fixes: 39efc9c8a973 ("ALSA: usb-audio: Fix last interface check for registration") Link: https://bugzilla.suse.com/show_bug.cgi?id=1205111 Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2022-11-08ALSA: usb-audio: Yet more regression for for the delayed card registrationTakashi Iwai1-9/+20
Although we tried to fix the regression for the recent changes with the delayed card registration, it doesn't seem covering the all cases; e.g. on Roland EDIROL M-100FX, where the generic quirk for Roland devices is applied, it misses the card registration because the detection of the last interface (apparently for MIDI) fails. This patch is an attempt to recover from those failures by calling the card register also at the error path for the secondary interfaces. The card register condition is also extended to match with the old check in the previous patch, too (i.e. the simple check of the interface number) for catching the probe with errors. Fixes: 39efc9c8a973 ("ALSA: usb-audio: Fix last interface check for registration") Cc: <[email protected]> Link: https://bugzilla.suse.com/show_bug.cgi?id=1205111 Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2022-11-05ALSA: hda/ca0132: add quirk for EVGA Z390 DARKXian Wang1-0/+1
The Z390 DARK mainboard uses a CA0132 audio controller. The quirk is needed to enable surround sound and 3.5mm headphone jack handling in the front audio connector as well as in the rear of the board when in stereo mode. Page 97 of the linked manual contains instructions to setup the controller. Signed-off-by: Xian Wang <[email protected]> Cc: [email protected] Link: https://www.evga.com/support/manuals/files/131-CS-E399.pdf Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2022-11-01ALSA: hda: clarify comments on SCF changesPierre-Louis Bossart1-4/+4
The commit 1f9d3d98694b1 ("ALSA: hda - set intel audio clock to a proper value") added a number of misleading comments. There is no ability to detect if an SCF value was set or not, what the code does is prevent the use of the 6MHz audio clock represented by the value 0 in LCTL.SCF. Changing the SCF settings does require the link to be power-cycled, but in all other cases the link is powered automatically when exiting reset. In other words, the power-cycle is an exception to the rule that the HDaudio legacy driver does not need to program SPA/CPA bits. In addition, the SCF related changes are only relevant for the first link. No functionality change, only comment clarifications. Signed-off-by: Pierre-Louis Bossart <[email protected]> Reviewed-by: Ranjani Sridharan <[email protected]> Reviewed-by: Rander Wang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2022-10-29ALSA: arm: pxa: pxa2xx-ac97-lib: fix return value check of platform_get_irq()Yang Yingliang1-1/+3
platform_get_irq() returns negative error number on failure, fix the return value check in pxa2xx_ac97_hw_probe() and assign the error code to 'ret'. Fixes: 2548e6c76ebf ("ARM: pxa: pxa2xx-ac97-lib: use IRQ resource") Signed-off-by: Yang Yingliang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2022-10-28ALSA: hda/realtek: Add quirk for ASUS Zenbook using CS35L41Stefan Binding1-0/+1
This Asus Zenbook laptop use Realtek HDA codec combined with 2xCS35L41 Amplifiers using I2C with Internal Boost. Signed-off-by: Stefan Binding <[email protected]> Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2022-10-27ALSA: aoa: Fix I2S device accountingTakashi Iwai1-1/+2
i2sbus_add_dev() is supposed to return the number of probed devices, i.e. either 1 or 0. However, i2sbus_add_dev() has one error handling that returns -ENODEV; this will screw up the accumulation number counted in the caller, i2sbus_probe(). Fix the return value to 0 and add the comment for better understanding for readers. Fixes: f3d9478b2ce4 ("[ALSA] snd-aoa: add snd-aoa") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2022-10-27ALSA: Use del_timer_sync() before freeing timerSteven Rostedt (Google)1-6/+1
The current code for freeing the emux timer is extremely dangerous: CPU0 CPU1 ---- ---- snd_emux_timer_callback() snd_emux_free() spin_lock(&emu->voice_lock) del_timer(&emu->tlist); <-- returns immediately spin_unlock(&emu->voice_lock); [..] kfree(emu); spin_lock(&emu->voice_lock); [BOOM!] Instead just use del_timer_sync() which will wait for the timer to finish before continuing. No need to check if the timer is active or not when doing so. This doesn't fix the race of a possible re-arming of the timer, but at least it won't use the data that has just been freed. [ Fixed unused variable warning by tiwai ] Cc: [email protected] Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Steven Rostedt (Google) <[email protected]> Reviewed-by: Guenter Roeck <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2022-10-27ALSA: aoa: i2sbus: fix possible memory leak in i2sbus_add_dev()Yang Yingliang1-0/+4
dev_set_name() in soundbus_add_one() allocates memory for name, it need be freed when of_device_register() fails, call soundbus_dev_put() to give up the reference that hold in device_initialize(), so that it can be freed in kobject_cleanup() when the refcount hit to 0. And other resources are also freed in i2sbus_release_dev(), so it can return 0 directly. Fixes: f3d9478b2ce4 ("[ALSA] snd-aoa: add snd-aoa") Signed-off-by: Yang Yingliang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2022-10-27Merge tag 'asoc-fix-v6.1-rc2' of ↵Takashi Iwai31-69/+270
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v6.1 Quite a few fixes here, a lot driver specific, plus some new quirks. There was a bit of a mess with the runtime PM handling due to some confusion in the API there which resulted in a number of commits and reverts but that should all be stable now.
2022-10-25ALSA: rme9652: use explicitly signed charJason A. Donenfeld2-24/+24
With char becoming unsigned by default, and with `char` alone being ambiguous and based on architecture, signed chars need to be marked explicitly as such. This fixes warnings like: sound/pci/rme9652/hdsp.c:3953 hdsp_channel_buffer_location() warn: 'hdsp->channel_map[channel]' is unsigned sound/pci/rme9652/hdsp.c:4153 snd_hdsp_channel_info() warn: impossible condition '(hdsp->channel_map[channel] < 0) => (0-255 < 0)' sound/pci/rme9652/rme9652.c:1833 rme9652_channel_buffer_location() warn: 'rme9652->channel_map[channel]' is unsigned Signed-off-by: Jason A. Donenfeld <[email protected]> Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2022-10-25ALSA: au88x0: use explicitly signed charJason A. Donenfeld2-4/+4
With char becoming unsigned by default, and with `char` alone being ambiguous and based on architecture, signed chars need to be marked explicitly as such. This fixes warnings like: sound/pci/au88x0/au88x0_core.c:2029 vortex_adb_checkinout() warn: signedness bug returning '(-22)' sound/pci/au88x0/au88x0_core.c:2046 vortex_adb_checkinout() warn: signedness bug returning '(-12)' sound/pci/au88x0/au88x0_core.c:2125 vortex_adb_allocroute() warn: 'vortex_adb_checkinout(vortex, (0), en, 0)' is unsigned sound/pci/au88x0/au88x0_core.c:2170 vortex_adb_allocroute() warn: 'vortex_adb_checkinout(vortex, stream->resources, en, 4)' is unsigned As well, since one function returns errnos, return an `int` rather than a `signed char`. Signed-off-by: Jason A. Donenfeld <[email protected]> Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2022-10-22ALSA: hda/realtek: Add another HP ZBook G9 model quirksTakashi Iwai1-0/+2
HP ZBook Firefly 16 G9 (103c:896d) and HP ZBook Power 15.6 G9 (103c:89c0) require the same quirk for enabling CS35L41 speaker amps. Signed-off-by: Takashi Iwai <[email protected]> Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2022-10-21ALSA: usb-audio: Add quirks for M-Audio Fast Track C400/600Takashi Iwai1-0/+2
M-Audio Fast Track C400 and C600 devices (0763:2030 and 0763:2031, respectively) seem requiring the explicit setup for the implicit feedback mode. This patch adds the quirk entries for those. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=214817 Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2022-10-21ASoC: SOF: Intel: hda-codec: fix possible memory leak in hda_codec_device_init()Yang Yingliang1-7/+1
If snd_hdac_device_register() fails, 'codec' and name allocated in dev_set_name() called in snd_hdac_device_init() are leaked. Fix this by calling put_device(), so they can be freed in snd_hda_codec_dev_release() and kobject_cleanup(). Fixes: 829c67319806 ("ASoC: SOF: Intel: Introduce HDA codec init and exit routines") Fixes: dfe66a18780d ("ALSA: hdac_ext: add extended HDA bus") Signed-off-by: Yang Yingliang <[email protected]> Reviewed-by: Kai Vehmanen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2022-10-21ASoC: amd: yc: Add Lenovo Thinkbook 14+ 2022 21D0 to quirks tableLeohearts1-0/+7
Lenovo Thinkbook 14+ 2022 (ThinkBook 14 G4+ ARA) uses Ryzen 6000 processor, and has the same microphone problem as other ThinkPads with AMD Ryzen 6000 series CPUs, which has been listed in https://bugzilla.kernel.org/show_bug.cgi?id=216267. Adding 21D0 to quirks table solves this microphone problem for ThinkBook 14 G4+ ARA. Signed-off-by: Taroe Leohearts <[email protected]> Link: https://lore.kernel.org/r/26B141B486BEF706+313d1732-e00c-ea41-3123-0d048d40ebb6@leohearts.com Signed-off-by: Mark Brown <[email protected]>
2022-10-21ASoC: Intel: Skylake: fix possible memory leak in skl_codec_device_init()Yang Yingliang1-7/+1
If snd_hdac_device_register() fails, 'codec' and name allocated in dev_set_name() called in snd_hdac_device_init() are leaked. Fix this by calling put_device(), so they can be freed in snd_hda_codec_dev_release() and kobject_cleanup(). Fixes: e4746d94d00c ("ASoC: Intel: Skylake: Introduce HDA codec init and exit routines") Signed-off-by: Yang Yingliang <[email protected]> Suggested-by: Cezary Rojewski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2022-10-21ALSA: ac97: Use snd_ctl_rename() to rename a controlMaciej S. Szmigiero1-8/+24
With the recent addition of hashed controls lookup it's not enough to just update the control name field, the hash entries for the modified control have to be updated too. snd_ctl_rename() takes care of that, so use it instead of directly modifying the control name. While we are at it, check also that the new control name doesn't accidentally overwrite the available buffer space. Fixes: c27e1efb61c5 ("ALSA: control: Use xarray for faster lookups") Cc: [email protected] Signed-off-by: Maciej S. Szmigiero <[email protected]> Link: https://lore.kernel.org/r/adb68bfa0885ba4a2583794b828f8e20d23f67c7.1666296963.git.maciej.szmigiero@oracle.com Signed-off-by: Takashi Iwai <[email protected]>
2022-10-21ALSA: ca0106: Use snd_ctl_rename() to rename a controlMaciej S. Szmigiero1-1/+1
With the recent addition of hashed controls lookup it's not enough to just update the control name field, the hash entries for the modified control have to be updated too. snd_ctl_rename() takes care of that, so use it instead of directly modifying the control name. Fixes: c27e1efb61c5 ("ALSA: control: Use xarray for faster lookups") Cc: [email protected] Signed-off-by: Maciej S. Szmigiero <[email protected]> Link: https://lore.kernel.org/r/bffee980a420f9b0eee5681d2f48d34a70cec0ce.1666296963.git.maciej.szmigiero@oracle.com Signed-off-by: Takashi Iwai <[email protected]>
2022-10-21ALSA: emu10k1: Use snd_ctl_rename() to rename a controlMaciej S. Szmigiero1-1/+1
With the recent addition of hashed controls lookup it's not enough to just update the control name field, the hash entries for the modified control have to be updated too. snd_ctl_rename() takes care of that, so use it instead of directly modifying the control name. Fixes: c27e1efb61c5 ("ALSA: control: Use xarray for faster lookups") Cc: [email protected] Signed-off-by: Maciej S. Szmigiero <[email protected]> Link: https://lore.kernel.org/r/38b19f019f95ee78a6e4e59d39afb9e2c3379413.1666296963.git.maciej.szmigiero@oracle.com Signed-off-by: Takashi Iwai <[email protected]>
2022-10-21ALSA: hda/realtek: Use snd_ctl_rename() to rename a controlMaciej S. Szmigiero1-1/+1
With the recent addition of hashed controls lookup it's not enough to just update the control name field, the hash entries for the modified control have to be updated too. snd_ctl_rename() takes care of that, so use it instead of directly modifying the control name. Fixes: c27e1efb61c5 ("ALSA: control: Use xarray for faster lookups") Cc: [email protected] Signed-off-by: Maciej S. Szmigiero <[email protected]> Link: https://lore.kernel.org/r/37496bd80f91f373268148f877fd735917d97287.1666296963.git.maciej.szmigiero@oracle.com Signed-off-by: Takashi Iwai <[email protected]>
2022-10-21ALSA: usb-audio: Use snd_ctl_rename() to rename a controlMaciej S. Szmigiero1-1/+1
With the recent addition of hashed controls lookup it's not enough to just update the control name field, the hash entries for the modified control have to be updated too. snd_ctl_rename() takes care of that, so use it instead of directly modifying the control name. Fixes: c27e1efb61c5 ("ALSA: control: Use xarray for faster lookups") Cc: [email protected] Signed-off-by: Maciej S. Szmigiero <[email protected]> Link: https://lore.kernel.org/r/723877882e3a56bb42a2a2214cfc85f347d36e19.1666296963.git.maciej.szmigiero@oracle.com Signed-off-by: Takashi Iwai <[email protected]>
2022-10-21ALSA: control: add snd_ctl_rename()Maciej S. Szmigiero2-0/+24
Add a snd_ctl_rename() function that takes care of updating the control hash entries for callers that already have the relevant struct snd_kcontrol at hand and hold the control write lock (or simply haven't registered the card yet). Fixes: c27e1efb61c5 ("ALSA: control: Use xarray for faster lookups") Cc: [email protected] Signed-off-by: Maciej S. Szmigiero <[email protected]> Link: https://lore.kernel.org/r/4170b71117ea81357a4f7eb8410f7cde20836c70.1666296963.git.maciej.szmigiero@oracle.com Signed-off-by: Takashi Iwai <[email protected]>
2022-10-20ALSA: ac97: fix possible memory leak in snd_ac97_dev_register()Yang Yingliang1-0/+1
If device_register() fails in snd_ac97_dev_register(), it should call put_device() to give up reference, or the name allocated in dev_set_name() is leaked. Fixes: 0ca06a00e206 ("[ALSA] AC97 bus interface for ad-hoc drivers") Signed-off-by: Yang Yingliang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2022-10-19ASoC: SOF: Intel: pci-tgl: fix ADL-N descriptorPierre-Louis Bossart1-1/+29
ADL-N uses a different signing key, which means we can't reuse the regular ADL descriptor used for ADL-P/M/S. Fixes: cd57eb3c403cb ("ASoC: SOF: Intel: pci-tgl: add ADL-N support") Signed-off-by: Pierre-Louis Bossart <[email protected]> Reviewed-by: Ranjani Sridharan <[email protected]> Reviewed-by: Chao Song <[email protected]> Reviewed-by: Bard Liao <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2022-10-19ASoC: qcom: lpass-cpu: Mark HDMI TX parity register as volatileSrinivasa Rao Mandadapu1-0/+2
Update LPASS_HDMI_TX_PARITY_ADDR register as volatile, to fix dp audio failures observed with some of external monitors. Fixes: 7cb37b7bd0d3 ("ASoC: qcom: Add support for lpass hdmi driver") Signed-off-by: Srinivasa Rao Mandadapu <[email protected]> Reviewed-by: Stephen Boyd <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2022-10-19ASoC: amd: yc: Adding Lenovo ThinkBook 14 Gen 4+ ARA and Lenovo ThinkBook 16 ↵linkt1-0/+14
Gen 4+ ARA to the Quirks List Lenovo ThinkBook 14 Gen 4+ ARA and ThinkBook 16 Gen 4+ ARA need to be added to the list of quirks for the microphone to work properly. Signed-off-by: linkt <[email protected]> Reviewed-by: Mario Limonciello <[email protected]> Link: https://lore.kernel.org/r/MEYPR01MB8397A3C27DE6206FA3EF834DB6239@MEYPR01MB8397.ausprd01.prod.outlook.com Signed-off-by: Mark Brown <[email protected]>
2022-10-19ASoC: jz4752b: Capture fixesMark Brown11863-198220/+589175
Merge series from Siarhei Volkau <[email protected]>: The patchset fixes: - Line In path stays powered off during capturing or bypass to mixer. - incorrectly represented dB values in alsamixer, et al. - incorrect represented Capture input selector in alsamixer in Playback tab. - wrong control selected as Capture Master
2022-10-19ASoC: codecs: jz4725b: Fix spelling mistake "Sourc" -> "Source", "Routee" -> ↵Colin Ian King1-1/+1
"Route" There are two spelling mistakes in codec routing description. Fix it. Signed-off-by: Colin Ian King <[email protected]> Reviewed-by: Philippe Mathieu-Daudé <[email protected]> Acked-by: Paul Cercueil <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2022-10-19ASoC: simple-card: Fix up checks for HW param fixupsAidan MacDonald4-3/+18
The "convert-xxx" properties only have an effect for DPCM DAI links. A DAI link is only created as DPCM if the device tree requires it; part of this involves checking for the use of "convert-xxx" properties. When the convert-sample-format property was added, the checks got out of sync. A DAI link that specified only convert-sample-format but did not pass any of the other DPCM checks would not go into DPCM mode and the convert-sample-format property would be silently ignored. Fix this by adding a function to do the "convert-xxx" property checks, instead of open-coding it in simple-card and audio-graph-card. And add "convert-sample-format" to the check function so that DAI links using it will be initialized correctly. Fixes: 047a05366f4b ("ASoC: simple-card-utils: Fixup DAI sample format") Acked-by: Kuninori Morimoto <[email protected]> Signed-off-by: Aidan MacDonald <[email protected]> Acked-by: Sameer Pujar <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2022-10-19ASoC: rt1308-sdw: add the default value of some registersShuming Fan1-0/+2
The driver missed the default value of register 0xc070/0xc360. This patch adds that default value to avoid invalid register access when the device doesn't be enumerated yet. BugLink: https://github.com/thesofproject/linux/issues/3924 Signed-off-by: Shuming Fan <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2022-10-19ASoC: rt1308-sdw: update the preset settingsShuming Fan3-3/+20
This patch updates the pad control and checks the hardware version to set the different preset settings. Signed-off-by: Shuming Fan <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2022-10-18ASoC: SOF: ipc4-mtrace: protect per-core nodes against multiple openKai Vehmanen1-2/+18
Add protection against multiple open of the mtrace/coreN debugfs nodes. This is not supported in the implementation, and this will show up as unexpected behaviour of the interface, and potential use of already freed memory. Fixes: f4ea22f7aa75 ("ASoC: SOF: ipc4: Add support for mtrace log extraction") Signed-off-by: Kai Vehmanen <[email protected]> Reviewed-by: Péter Ujfalusi <[email protected]> Reviewed-by: Pierre-Louis Bossart <[email protected]> Reviewed-by: Ranjani Sridharan <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2022-10-18ASoC: Intel: sof_rt5682: Add quirk for Rex boardYong Zhi1-0/+12
Add mtl_mx98357_rt5682 driver data for Chrome Rex board support. Reviewed-by: Bard Liao <[email protected]> Reviewed-by: Curtis Malainey <[email protected]> Signed-off-by: Yong Zhi <[email protected]> Signed-off-by: Pierre-Louis Bossart <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2022-10-18ASoC: SOF: Intel: pci-mtl: fix firmware namePierre-Louis Bossart1-1/+1
Initial IPC4 tests used the same conventions as previous reference closed-source firmware, but for MeteorLake the convention is the same as previous SOF releases (sof-<platform>.ri). Only the prefix changes to avoid confusions between IPC types. This change has no impact on users since the firmware has not yet been released. Fixes: 064520e8aeaa2 ("ASoC: SOF: Intel: Add support for MeteorLake (MTL)") Signed-off-by: Pierre-Louis Bossart <[email protected]> Reviewed-by: Chao Song <[email protected]> Reviewed-by: Kai Vehmanen <[email protected]> Reviewed-by: Ranjani Sridharan <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2022-10-18ASoC: Intel: sof_sdw: add quirk variant for LAPBC710 NUC15Pierre-Louis Bossart1-0/+11
Some NUC15 LAPBC710 devices don't expose the same DMI information as the Intel reference, add additional entry in the match table. BugLink: https://github.com/thesofproject/linux/issues/3885 Signed-off-by: Pierre-Louis Bossart <[email protected]> Reviewed-by: Ranjani Sridharan <[email protected]> Reviewed-by: Bard Liao <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2022-10-18ALSA: hda/realtek: Add quirk for ASUS Zenbook using CS35L41Stefan Binding1-0/+1
This Asus Zenbook laptop use Realtek HDA codec combined with 2xCS35L41 Amplifiers using SPI with External Boost. Signed-off-by: Stefan Binding <[email protected]> Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2022-10-18ASoC: qcom: SND_SOC_SC7180 optionally depends on SOUNDWIRERandy Dunlap1-0/+1
If SOUNDWIRE is enabled, then SND_SOC_SC7180 should depend on SOUNDWIRE to prevent SOUNDWIRE=m and SND_SOC_SC7180=y, which causes build errors: s390-linux-ld: sound/soc/qcom/common.o: in function `qcom_snd_sdw_prepare': common.c:(.text+0x140): undefined reference to `sdw_disable_stream' s390-linux-ld: common.c:(.text+0x14a): undefined reference to `sdw_deprepare_stream' s390-linux-ld: common.c:(.text+0x158): undefined reference to `sdw_prepare_stream' s390-linux-ld: common.c:(.text+0x16a): undefined reference to `sdw_enable_stream' s390-linux-ld: common.c:(.text+0x17c): undefined reference to `sdw_deprepare_stream' s390-linux-ld: sound/soc/qcom/common.o: in function `qcom_snd_sdw_hw_free': common.c:(.text+0x344): undefined reference to `sdw_disable_stream' s390-linux-ld: common.c:(.text+0x34e): undefined reference to `sdw_deprepare_stream' Fixes: 3bd975f3ae0a ("ASoC: qcom: sm8250: move some code to common") Fixes: 9e3ecb5b1681 ("ASoC: qcom: sc7180: Add machine driver for sound card registration") Signed-off-by: Randy Dunlap <[email protected]> Reported-by: kernel test robot <[email protected]> Cc: Srinivas Kandagatla <[email protected]> Cc: Banajit Goswami <[email protected]> Cc: Mark Brown <[email protected]> Cc: Liam Girdwood <[email protected]> Cc: Ajit Pandey <[email protected]> Cc: Cheng-Yi Chiang <[email protected]> Cc: Jaroslav Kysela <[email protected]> Cc: Takashi Iwai <[email protected]> Cc: [email protected] Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2022-10-18ASoC: codecs: tlv320adc3xxx: Wrap adc3xxx_i2c_remove() in __exit_p()Geert Uytterhoeven1-1/+1
If CONFIG_SND_SOC_TLV320ADC3XXX=y: `.exit.text' referenced in section `.data' of sound/soc/codecs/tlv320adc3xxx.o: defined in discarded section `.exit.text' of sound/soc/codecs/tlv320adc3xxx.o Fix this by wrapping the adc3xxx_i2c_remove() pointer in __exit_p(). Fixes: e9a3b57efd28fe88 ("ASoC: codec: tlv320adc3xxx: New codec driver") Signed-off-by: Geert Uytterhoeven <[email protected]> Link: https://lore.kernel.org/r/3225ba4cfe558d9380155e75385954dd21d4e7eb.1665909132.git.geert@linux-m68k.org Signed-off-by: Mark Brown <[email protected]>
2022-10-17ASoC: codecs: jz4725b: fix capture selector namingSiarhei Volkau1-7/+7
At the moment Capture source selector appears on Playback tab in the alsamixer and has a senseless name. Let's fix that. Signed-off-by: Siarhei Volkau <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2022-10-17ASoC: codecs: jz4725b: use right control for Capture VolumeSiarhei Volkau1-6/+9
Line In Bypass control is used as Master Capture at the moment this is completely incorrect. Current control routed to Mixer instead of ADC, thus can't affect Capture path. ADC control shall be used instead. ADC volume control parameters are different, so the patch fixes that as well. Manual says (16.6.3.2 Programmable input attenuation amplifier: PGATM) that gain varies in range 0dB..22.5dB with 1.5dB step. Signed-off-by: Siarhei Volkau <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2022-10-17ASoC: codecs: jz4725b: fix reported volume for Master ctlSiarhei Volkau1-1/+1
DAC volume control is the Master Playback Volume at the moment and it reports wrong levels in alsamixer and other alsa apps. The patch fixes that, as stated in manual on the jz4725b SoC (16.6.3.4 Programmable attenuation: GOD) the ctl range varies from -22.5dB to 0dB with 1.5dB step. Signed-off-by: Siarhei Volkau <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2022-10-17ASoC: codecs: jz4725b: add missed Line In power control bitSiarhei Volkau1-1/+2
Line In path stayed powered off during capturing or bypass to mixer. Signed-off-by: Siarhei Volkau <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2022-10-17ALSA: hda/realtek: simplify the return of comp_bind()Yang Yingliang1-6/+1
After commit 23904f7b2518 ("ALSA: hda: cs35l41: Remove suspend/resume hda hooks"), the return of comp_bind() can be simplified. No functional changed. Signed-off-by: Yang Yingliang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2022-10-16Linux 6.1-rc1Linus Torvalds1-2/+2
2022-10-16Merge tag 'random-6.1-rc1-for-linus' of ↵Linus Torvalds185-421/+378
git://git.kernel.org/pub/scm/linux/kernel/git/crng/random Pull more random number generator updates from Jason Donenfeld: "This time with some large scale treewide cleanups. The intent of this pull is to clean up the way callers fetch random integers. The current rules for doing this right are: - If you want a secure or an insecure random u64, use get_random_u64() - If you want a secure or an insecure random u32, use get_random_u32() The old function prandom_u32() has been deprecated for a while now and is just a wrapper around get_random_u32(). Same for get_random_int(). - If you want a secure or an insecure random u16, use get_random_u16() - If you want a secure or an insecure random u8, use get_random_u8() - If you want secure or insecure random bytes, use get_random_bytes(). The old function prandom_bytes() has been deprecated for a while now and has long been a wrapper around get_random_bytes() - If you want a non-uniform random u32, u16, or u8 bounded by a certain open interval maximum, use prandom_u32_max() I say "non-uniform", because it doesn't do any rejection sampling or divisions. Hence, it stays within the prandom_*() namespace, not the get_random_*() namespace. I'm currently investigating a "uniform" function for 6.2. We'll see what comes of that. By applying these rules uniformly, we get several benefits: - By using prandom_u32_max() with an upper-bound that the compiler can prove at compile-time is ≤65536 or ≤256, internally get_random_u16() or get_random_u8() is used, which wastes fewer batched random bytes, and hence has higher throughput. - By using prandom_u32_max() instead of %, when the upper-bound is not a constant, division is still avoided, because prandom_u32_max() uses a faster multiplication-based trick instead. - By using get_random_u16() or get_random_u8() in cases where the return value is intended to indeed be a u16 or a u8, we waste fewer batched random bytes, and hence have higher throughput. This series was originally done by hand while I was on an airplane without Internet. Later, Kees and I worked on retroactively figuring out what could be done with Coccinelle and what had to be done manually, and then we split things up based on that. So while this touches a lot of files, the actual amount of code that's hand fiddled is comfortably small" * tag 'random-6.1-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random: prandom: remove unused functions treewide: use get_random_bytes() when possible treewide: use get_random_u32() when possible treewide: use get_random_{u8,u16}() when possible, part 2 treewide: use get_random_{u8,u16}() when possible, part 1 treewide: use prandom_u32_max() when possible, part 2 treewide: use prandom_u32_max() when possible, part 1
2022-10-16Merge tag 'perf-tools-for-v6.1-2-2022-10-16' of ↵Linus Torvalds36-71/+1265
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull more perf tools updates from Arnaldo Carvalho de Melo: - Use BPF CO-RE (Compile Once, Run Everywhere) to support old kernels when using bperf (perf BPF based counters) with cgroups. - Support HiSilicon PCIe Performance Monitoring Unit (PMU), that monitors bandwidth, latency, bus utilization and buffer occupancy. Documented in Documentation/admin-guide/perf/hisi-pcie-pmu.rst. - User space tasks can migrate between CPUs, so when tracing selected CPUs, system-wide sideband is still needed, fix it in the setup of Intel PT on hybrid systems. - Fix metricgroups title message in 'perf list', it should state that the metrics groups are to be used with the '-M' option, not '-e'. - Sync the msr-index.h copy with the kernel sources, adding support for using "AMD64_TSC_RATIO" in filter expressions in 'perf trace' as well as decoding it when printing the MSR tracepoint arguments. - Fix program header size and alignment when generating a JIT ELF in 'perf inject'. - Add multiple new Intel PT 'perf test' entries, including a jitdump one. - Fix the 'perf test' entries for 'perf stat' CSV and JSON output when running on PowerPC due to an invalid topology number in that arch. - Fix the 'perf test' for arm_coresight failures on the ARM Juno system. - Fix the 'perf test' attr entry for PERF_FORMAT_LOST, adding this option to the or expression expected in the intercepted perf_event_open() syscall. - Add missing condition flags ('hs', 'lo', 'vc', 'vs') for arm64 in the 'perf annotate' asm parser. - Fix 'perf mem record -C' option processing, it was being chopped up when preparing the underlying 'perf record -e mem-events' and thus being ignored, requiring using '-- -C CPUs' as a workaround. - Improvements and tidy ups for 'perf test' shell infra. - Fix Intel PT information printing segfault in uClibc, where a NULL format was being passed to fprintf. * tag 'perf-tools-for-v6.1-2-2022-10-16' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (23 commits) tools arch x86: Sync the msr-index.h copy with the kernel sources perf auxtrace arm64: Add support for parsing HiSilicon PCIe Trace packet perf auxtrace arm64: Add support for HiSilicon PCIe Tune and Trace device driver perf auxtrace arm: Refactor event list iteration in auxtrace_record__init() perf tests stat+json_output: Include sanity check for topology perf tests stat+csv_output: Include sanity check for topology perf intel-pt: Fix system_wide dummy event for hybrid perf intel-pt: Fix segfault in intel_pt_print_info() with uClibc perf test: Fix attr tests for PERF_FORMAT_LOST perf test: test_intel_pt.sh: Add 9 tests perf inject: Fix GEN_ELF_TEXT_OFFSET for jit perf test: test_intel_pt.sh: Add jitdump test perf test: test_intel_pt.sh: Tidy some alignment perf test: test_intel_pt.sh: Print a message when skipping kernel tracing perf test: test_intel_pt.sh: Tidy some perf record options perf test: test_intel_pt.sh: Fix return checking again perf: Skip and warn on unknown format 'configN' attrs perf list: Fix metricgroups title message perf mem: Fix -C option behavior for perf mem record perf annotate: Add missing condition flags for arm64 ...
2022-10-16Merge tag 'kbuild-fixes-v6.1' of ↵Linus Torvalds6-11/+18
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Fix CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y compile error for the combination of Clang >= 14 and GAS <= 2.35. - Drop vmlinux.bz2 from the rpm package as it just annoyingly increased the package size. - Fix modpost error under build environments using musl. - Make *.ll files keep value names for easier debugging - Fix single directory build - Prevent RISC-V from selecting the broken DWARF5 support when Clang and GAS are used together. * tag 'kbuild-fixes-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: lib/Kconfig.debug: Add check for non-constant .{s,u}leb128 support to DWARF5 kbuild: fix single directory build kbuild: add -fno-discard-value-names to cmd_cc_ll_c scripts/clang-tools: Convert clang-tidy args to list modpost: put modpost options before argument kbuild: Stop including vmlinux.bz2 in the rpm's Kconfig.debug: add toolchain checks for DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT Kconfig.debug: simplify the dependency of DEBUG_INFO_DWARF4/5
2022-10-16Merge tag 'clk-for-linus' of ↵Linus Torvalds18-129/+1831
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull more clk updates from Stephen Boyd: "This is the final part of the clk patches for this merge window. The clk rate range series needed another week to fully bake. Maxime fixed the bug that broke clk notifiers and prevented this from being included in the first pull request. He also added a unit test on top to make sure it doesn't break so easily again. The majority of the series fixes up how the clk_set_rate_*() APIs work, particularly around when the rate constraints are dropped and how they move around when reparenting clks. Overall it's a much needed improvement to the clk rate range APIs that used to be pretty broken if you looked sideways. Beyond the core changes there are a few driver fixes for a compilation issue or improper data causing clks to fail to register or have the wrong parents. These are good to get in before the first -rc so that the system actually boots on the affected devices" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (31 commits) clk: tegra: Fix Tegra PWM parent clock clk: at91: fix the build with binutils 2.27 clk: qcom: gcc-msm8660: Drop hardcoded fixed board clocks clk: mediatek: clk-mux: Add .determine_rate() callback clk: tests: Add tests for notifiers clk: Update req_rate on __clk_recalc_rates() clk: tests: Add missing test case for ranges clk: qcom: clk-rcg2: Take clock boundaries into consideration for gfx3d clk: Introduce the clk_hw_get_rate_range function clk: Zero the clk_rate_request structure clk: Stop forwarding clk_rate_requests to the parent clk: Constify clk_has_parent() clk: Introduce clk_core_has_parent() clk: Switch from __clk_determine_rate to clk_core_round_rate_nolock clk: Add our request boundaries in clk_core_init_rate_req clk: Introduce clk_hw_init_rate_request() clk: Move clk_core_init_rate_req() from clk_core_round_rate_nolock() to its caller clk: Change clk_core_init_rate_req prototype clk: Set req_rate on reparenting clk: Take into account uncached clocks in clk_set_rate_range() ...
Powered by cgit, Gruvboxed by Blaster4385.