| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
There are three problems with the current layout of the doublefault
stack and TSS. First, the TSS is only cacheline-aligned, which is
not enough -- if the hardware portion of the TSS (struct x86_hw_tss)
crosses a page boundary, horrible things happen [0]. Second, the
stack and TSS are global, so simultaneous double faults on different
CPUs will cause massive corruption. Third, the whole mechanism
won't work if user CR3 is loaded, resulting in a triple fault [1].
Let the doublefault stack and TSS share a page (which prevents the
TSS from spanning a page boundary), make it percpu, and move it into
cpu_entry_area. Teach the stack dump code about the doublefault
stack.
[0] Real hardware will read past the end of the page onto the next
*physical* page if a task switch happens. Virtual machines may
have any number of bugs, and I would consider it reasonable for
a VM to summarily kill the guest if it tries to task-switch to
a page-spanning TSS.
[1] Real hardware triple faults. At least some VMs seem to hang.
I'm not sure what's going on.
Signed-off-by: Andy Lutomirski <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Linus Torvalds <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
|
|
doublefault.c now only contains 32-bit code. Rename it to
doublefault_32.c.
Signed-off-by: Andy Lutomirski <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Linus Torvalds <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
|
|
The 64-bit doublefault handler is much nicer than the 32-bit one.
As a first step toward unifying them, make the 64-bit handler
self-contained. This should have no effect no functional effect
except in the odd case of x86_64 with CONFIG_DOUBLEFAULT=n in which
case it will change the logging a bit.
This also gets rid of CONFIG_DOUBLEFAULT configurability on 64-bit
kernels. It didn't do anything useful -- CONFIG_DOUBLEFAULT=n
didn't actually disable doublefault handling on x86_64.
Signed-off-by: Andy Lutomirski <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Linus Torvalds <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
|
|
The DOUBLE_FAULT crash does INT $8, which is a decent approximation
of a double fault. This is useful for testing the double fault
handling. Use it like:
Signed-off-by: Andy Lutomirski <[email protected]>
Cc: Kees Cook <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Linus Torvalds <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
|
|
We used to test SYSENTER only through the vDSO. Test it directly
too, just in case.
Signed-off-by: Andy Lutomirski <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Linus Torvalds <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
|
|
The job of vmalloc_sync_all() is to help the lazy freeing of vmalloc()
ranges: before such vmap ranges are reused we make sure that they are
unmapped from every task's page tables.
This is really easy on pagetable setups where the kernel page tables
are shared between all tasks - this is the case on 32-bit kernels
with SHARED_KERNEL_PMD = 1.
But on !SHARED_KERNEL_PMD 32-bit kernels this involves iterating
over the pgd_list and clearing all pmd entries in the pgds that
are cleared in the init_mm.pgd, which is the reference pagetable
that the vmalloc() code uses.
In that context the current practice of vmalloc_sync_all() iterating
until FIX_ADDR_TOP is buggy:
for (address = VMALLOC_START & PMD_MASK;
address >= TASK_SIZE_MAX && address < FIXADDR_TOP;
address += PMD_SIZE) {
struct page *page;
Because iterating up to FIXADDR_TOP will involve a lot of non-vmalloc
address ranges:
VMALLOC -> PKMAP -> LDT -> CPU_ENTRY_AREA -> FIX_ADDR
This is mostly harmless for the FIX_ADDR and CPU_ENTRY_AREA ranges
that don't clear their pmds, but it's lethal for the LDT range,
which relies on having different mappings in different processes,
and 'synchronizing' them in the vmalloc sense corrupts those
pagetable entries (clearing them).
This got particularly prominent with PTI, which turns SHARED_KERNEL_PMD
off and makes this the dominant mapping mode on 32-bit.
To make LDT working again vmalloc_sync_all() must only iterate over
the volatile parts of the kernel address range that are identical
between all processes.
So the correct check in vmalloc_sync_all() is "address < VMALLOC_END"
to make sure the VMALLOC areas are synchronized and the LDT
mapping is not falsely overwritten.
The CPU_ENTRY_AREA and the FIXMAP area are no longer synced either,
but this is not really a proplem since their PMDs get established
during bootup and never change.
This change fixes the ldt_gdt selftest in my setup.
[ mingo: Fixed up the changelog to explain the logic and modified the
copying to only happen up until VMALLOC_END. ]
Reported-by: Borislav Petkov <[email protected]>
Tested-by: Borislav Petkov <[email protected]>
Signed-off-by: Joerg Roedel <[email protected]>
Cc: <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: Joerg Roedel <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: [email protected]
Fixes: 7757d607c6b3: ("x86/pti: Allow CONFIG_PAGE_TABLE_ISOLATION for x86_32")
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
|
|
After the following commit:
05b042a19443: ("x86/pti/32: Calculate the various PTI cpu_entry_area sizes correctly, make the CPU_ENTRY_AREA_PAGES assert precise")
'struct cpu_entry_area' has to be Kconfig invariant, so that we always
have a matching CPU_ENTRY_AREA_PAGES size.
This commit added a CONFIG_X86_IOPL_IOPERM dependency to tss_struct:
111e7b15cf10: ("x86/ioperm: Extend IOPL config to control ioperm() as well")
Which, if CONFIG_X86_IOPL_IOPERM is turned off, reduces the size of
cpu_entry_area by two pages, triggering the assert:
./include/linux/compiler.h:391:38: error: call to ‘__compiletime_assert_202’ declared with attribute error: BUILD_BUG_ON failed: (CPU_ENTRY_AREA_PAGES+1)*PAGE_SIZE != CPU_ENTRY_AREA_MAP_SIZE
Simplify the Kconfig dependencies and make cpu_entry_area constant
size on 32-bit kernels again.
Fixes: 05b042a19443: ("x86/pti/32: Calculate the various PTI cpu_entry_area sizes correctly, make the CPU_ENTRY_AREA_PAGES assert precise")
Cc: Thomas Gleixner <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Peter Zijlstra (Intel) <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
|
|
The Beurer GL50 evo uses a Cygnal-manufactured CD-on-a-chip that only
accepts a subset of SCSI commands, and supports neither audio commands
nor generic packet commands.
Actually sending those commands bring the device to an unrecoverable
state that causes the device to hang and reset.
To: Jens Axboe <[email protected]>
Cc: [email protected]
Cc: [email protected]
Signed-off-by: Diego Elio Pettenò <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
Reading the TOC only works if the device can play audio, otherwise
these commands fail (and possibly bring the device to an unhealthy
state.)
Similarly, cdrom_mmc3_profile() should only be called if the device
supports generic packet commands.
To: Jens Axboe <[email protected]>
Cc: [email protected]
Cc: [email protected]
Signed-off-by: Diego Elio Pettenò <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
This reverts commit 0be0ee71816b2b6725e2b4f32ad6726c9d729777.
I was hoping it would be benign to switch over entirely to FMODE_STREAM,
and we'd have just a couple of small fixups we'd need, but it looks like
we're not quite there yet.
While it worked fine on both my desktop and laptop, they are fairly
similar in other respects, and run mostly the same loads. Kenneth
Crudup reports that it seems to break both his vmware installation and
the KDE upower service. In both cases apparently leading to timeouts
due to waitinmg for the f_pos lock.
There are a number of character devices in particular that definitely
want stream-like behavior, but that currently don't get marked as
streams, and as a result get the exclusion between concurrent
read()/write() on the same file descriptor. Which doesn't work well for
them.
The most obvious example if this is /dev/console and /dev/tty, which use
console_fops and tty_fops respectively (and ptmx_fops for the pty master
side). It may be that it's just this that causes problems, but we
clearly weren't ready yet.
Because there's a number of other likely common cases that don't have
llseek implementations and would seem to act as stream devices:
/dev/fuse (fuse_dev_operations)
/dev/mcelog (mce_chrdev_ops)
/dev/mei0 (mei_fops)
/dev/net/tun (tun_fops)
/dev/nvme0 (nvme_dev_fops)
/dev/tpm0 (tpm_fops)
/proc/self/ns/mnt (ns_file_operations)
/dev/snd/pcm* (snd_pcm_f_ops[])
and while some of these could be trivially automatically detected by the
vfs layer when the character device is opened by just noticing that they
have no read or write operations either, it often isn't that obvious.
Some character devices most definitely do use the file position, even if
they don't allow seeking: the firmware update code, for example, uses
simple_read_from_buffer() that does use f_pos, but doesn't allow seeking
back and forth.
We'll revisit this when there's a better way to detect the problem and
fix it (possibly with a coccinelle script to do more of the FMODE_STREAM
annotations).
Reported-by: Kenneth R. Crudup <[email protected]>
Cc: Kirill Smelkov <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 iopl updates from Ingo Molnar:
"This implements a nice simplification of the iopl and ioperm code that
Thomas Gleixner discovered: we can implement the IO privilege features
of the iopl system call by using the IO permission bitmap in
permissive mode, while trapping CLI/STI/POPF/PUSHF uses in user-space
if they change the interrupt flag.
This implements that feature, with testing facilities and related
cleanups"
[ "Simplification" may be an over-statement. The main goal is to avoid
the cli/sti of iopl by effectively implementing the IO port access
parts of iopl in terms of ioperm.
This may end up not workign well in case people actually depend on
cli/sti being available, or if there are mixed uses of iopl and
ioperm. We will see.. - Linus ]
* 'x86-iopl-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (22 commits)
x86/ioperm: Fix use of deprecated config option
x86/entry/32: Clarify register saving in __switch_to_asm()
selftests/x86/iopl: Extend test to cover IOPL emulation
x86/ioperm: Extend IOPL config to control ioperm() as well
x86/iopl: Remove legacy IOPL option
x86/iopl: Restrict iopl() permission scope
x86/iopl: Fixup misleading comment
selftests/x86/ioperm: Extend testing so the shared bitmap is exercised
x86/ioperm: Share I/O bitmap if identical
x86/ioperm: Remove bitmap if all permissions dropped
x86/ioperm: Move TSS bitmap update to exit to user work
x86/ioperm: Add bitmap sequence number
x86/ioperm: Move iobitmap data into a struct
x86/tss: Move I/O bitmap data into a seperate struct
x86/io: Speedup schedule out of I/O bitmap user
x86/ioperm: Avoid bitmap allocation if no permissions are set
x86/ioperm: Simplify first ioperm() invocation logic
x86/iopl: Cleanup include maze
x86/tss: Fix and move VMX BUILD_BUG_ON()
x86/cpu: Unify cpu_init()
...
|
|
This system call has been deprecated almost since it was introduced, and
in a survey of the linux distributions I can no longer find any of them
that enable CONFIG_SYSCTL_SYSCALL. The only indication that I can find
that anyone might care is that a few of the defconfigs in the kernel
enable CONFIG_SYSCTL_SYSCALL. However this appears in only 31 of 414
defconfigs in the kernel, so I suspect this symbols presence is simply
because it is harmless to include rather than because it is necessary.
As there appear to be no users of the sysctl system call, remove the
code. As this removes one of the few uses of the internal kernel mount
of proc I hope this allows for even more simplifications of the proc
filesystem.
Cc: Alex Smith <[email protected]>
Cc: Anders Berg <[email protected]>
Cc: Apelete Seketeli <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Chee Nouk Phoon <[email protected]>
Cc: Chris Zankel <[email protected]>
Cc: Christian Ruppert <[email protected]>
Cc: Greg Ungerer <[email protected]>
Cc: Harvey Hunt <[email protected]>
Cc: Helge Deller <[email protected]>
Cc: Hongliang Tao <[email protected]>
Cc: Hua Yan <[email protected]>
Cc: Huacai Chen <[email protected]>
Cc: John Crispin <[email protected]>
Cc: Jonas Jensen <[email protected]>
Cc: Josh Boyer <[email protected]>
Cc: Jun Nie <[email protected]>
Cc: Kevin Hilman <[email protected]>
Cc: Kevin Wells <[email protected]>
Cc: Kumar Gala <[email protected]>
Cc: Lars-Peter Clausen <[email protected]>
Cc: Ley Foon Tan <[email protected]>
Cc: Linus Walleij <[email protected]>
Cc: Markos Chandras <[email protected]>
Cc: Max Filippov <[email protected]>
Cc: Noam Camus <[email protected]>
Cc: Olof Johansson <[email protected]>
Cc: Paul Burton <[email protected]>
Cc: Paul Mundt <[email protected]>
Cc: Phil Edworthy <[email protected]>
Cc: Pierrick Hascoet <[email protected]>
Cc: Ralf Baechle <[email protected]>
Cc: Roland Stigge <[email protected]>
Cc: Santosh Shilimkar <[email protected]>
Cc: Scott Telford <[email protected]>
Cc: Stephen Boyd <[email protected]>
Cc: Steven J. Hill <[email protected]>
Cc: Tanmay Inamdar <[email protected]>
Cc: Vineet Gupta <[email protected]>
Cc: Wolfram Sang <[email protected]>
Acked-by: Andi Kleen <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
Signed-off-by: "Eric W. Biederman" <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 asm updates from Ingo Molnar:
"The main changes in this cycle were:
- Cross-arch changes to move the linker sections for NOTES and
EXCEPTION_TABLE into the RO_DATA area, where they belong on most
architectures. (Kees Cook)
- Switch the x86 linker fill byte from x90 (NOP) to 0xcc (INT3), to
trap jumps into the middle of those padding areas instead of
sliding execution. (Kees Cook)
- A thorough cleanup of symbol definitions within x86 assembler code.
The rather randomly named macros got streamlined around a
(hopefully) straightforward naming scheme:
SYM_START(name, linkage, align...)
SYM_END(name, sym_type)
SYM_FUNC_START(name)
SYM_FUNC_END(name)
SYM_CODE_START(name)
SYM_CODE_END(name)
SYM_DATA_START(name)
SYM_DATA_END(name)
etc - with about three times of these basic primitives with some
label, local symbol or attribute variant, expressed via postfixes.
No change in functionality intended. (Jiri Slaby)
- Misc other changes, cleanups and smaller fixes"
* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (67 commits)
x86/entry/64: Remove pointless jump in paranoid_exit
x86/entry/32: Remove unused resume_userspace label
x86/build/vdso: Remove meaningless CFLAGS_REMOVE_*.o
m68k: Convert missed RODATA to RO_DATA
x86/vmlinux: Use INT3 instead of NOP for linker fill bytes
x86/mm: Report actual image regions in /proc/iomem
x86/mm: Report which part of kernel image is freed
x86/mm: Remove redundant address-of operators on addresses
xtensa: Move EXCEPTION_TABLE to RO_DATA segment
powerpc: Move EXCEPTION_TABLE to RO_DATA segment
parisc: Move EXCEPTION_TABLE to RO_DATA segment
microblaze: Move EXCEPTION_TABLE to RO_DATA segment
ia64: Move EXCEPTION_TABLE to RO_DATA segment
h8300: Move EXCEPTION_TABLE to RO_DATA segment
c6x: Move EXCEPTION_TABLE to RO_DATA segment
arm64: Move EXCEPTION_TABLE to RO_DATA segment
alpha: Move EXCEPTION_TABLE to RO_DATA segment
x86/vmlinux: Move EXCEPTION_TABLE to RO_DATA segment
x86/vmlinux: Actually use _etext for the end of the text segment
vmlinux.lds.h: Allow EXCEPTION_TABLE to live in RO_DATA
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"These are the fixes left over from the v5.4 cycle:
- Various low level 32-bit entry code fixes and improvements by Andy
Lutomirski, Peter Zijlstra and Thomas Gleixner.
- Fix 32-bit Xen PV breakage, by Jan Beulich"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/entry/32: Fix FIXUP_ESPFIX_STACK with user CR3
x86/pti/32: Calculate the various PTI cpu_entry_area sizes correctly, make the CPU_ENTRY_AREA_PAGES assert precise
selftests/x86/sigreturn/32: Invalidate DS and ES when abusing the kernel
selftests/x86/mov_ss_trap: Fix the SYSENTER test
x86/entry/32: Fix NMI vs ESPFIX
x86/entry/32: Unwind the ESPFIX stack earlier on exception entry
x86/entry/32: Move FIXUP_FRAME after pushing %fs in SAVE_ALL
x86/entry/32: Use %ss segment where required
x86/entry/32: Fix IRET exception
x86/cpu_entry_area: Add guard page for entry stack on 32bit
x86/pti/32: Size initial_page_table correctly
x86/doublefault/32: Fix stack canaries in the double fault handler
x86/xen/32: Simplify ring check in xen_iret_crit_fixup()
x86/xen/32: Make xen_iret_crit_fixup() independent of frame layout
x86/stackframe/32: Repair 32-bit Xen PV
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 PTI updates from Ingo Molnar:
"Fix reporting bugs of the MDS and TAA mitigation status, if one or
both are set via a boot option.
No change to mitigation behavior intended"
* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/speculation: Fix redundant MDS mitigation message
x86/speculation: Fix incorrect MDS/TAA mitigation status
|
|
In commit 4f07b80c9733 ("tipc: check msg->req data len in
tipc_nl_compat_bearer_disable") the same patch code was copied into
routines: tipc_nl_compat_bearer_disable(),
tipc_nl_compat_link_stat_dump() and tipc_nl_compat_link_reset_stats().
The two link routine occurrences should have been modified to check
the maximum link name length and not bearer name length.
Fixes: 4f07b80c9733 ("tipc: check msg->reg data len in tipc_nl_compat_bearer_disable")
Signed-off-by: John Rutherford <[email protected]>
Acked-by: Jon Maloy <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
RCLK is a fixed 50MHz clock derived from HPLL that is described by a
single gate for each MAC.
Signed-off-by: Andrew Jeffery <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Reviewed-by: Joel Stanley <[email protected]>
Signed-off-by: Stephen Boyd <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 platform updates from Ingo Molnar:
"UV platform updates (with a 'hubless' variant) and Jailhouse updates
for better UART support"
* 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/jailhouse: Only enable platform UARTs if available
x86/jailhouse: Improve setup data version comparison
x86/platform/uv: Account for UV Hubless in is_uvX_hub Ops
x86/platform/uv: Check EFI Boot to set reboot type
x86/platform/uv: Decode UVsystab Info
x86/platform/uv: Add UV Hubbed/Hubless Proc FS Files
x86/platform/uv: Setup UV functions for Hubless UV Systems
x86/platform/uv: Add return code to UV BIOS Init function
x86/platform/uv: Return UV Hubless System Type
x86/platform/uv: Save OEM_ID from ACPI MADT probe
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 mm updates from Ingo Molnar:
"The main changes in this cycle were:
- A PAT series from Davidlohr Bueso, which simplifies the memtype
rbtree by using the interval tree helpers. (There's more cleanups
in this area queued up, but they didn't make the merge window.)
- Also flip over CONFIG_X86_5LEVEL to default-y. This might draw in a
few more testers, as all the major distros are going to have
5-level paging enabled by default in their next iterations.
- Misc cleanups"
* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm/pat: Rename pat_rbtree.c to pat_interval.c
x86/mm/pat: Drop the rbt_ prefix from external memtype calls
x86/mm/pat: Do not pass 'rb_root' down the memtype tree helper functions
x86/mm/pat: Convert the PAT tree to a generic interval tree
x86/mm: Clean up the pmd_read_atomic() comments
x86/mm: Fix function name typo in pmd_read_atomic() comment
x86/cpu: Clean up intel_tlb_table[]
x86/mm: Enable 5-level paging support by default
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 kdump updates from Ingo Molnar:
"This solves a kdump artifact where encrypted memory contents are
dumped, instead of unencrypted ones.
The solution also happens to simplify the kdump code, to everyone's
delight"
* 'x86-kdump-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/crash: Align function arguments on opening braces
x86/kdump: Remove the backup region handling
x86/kdump: Always reserve the low 1M when the crashkernel option is specified
x86/crash: Add a forward declaration of struct kimage
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 hyperv updates from Ingo Molnar:
"Misc updates to the hyperv guest code:
- Rework clockevents initialization to better support hibernation
- Allow guests to enable InvariantTSC
- Micro-optimize send_ipi_one"
* 'x86-hyperv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/hyperv: Initialize clockevents earlier in CPU onlining
x86/hyperv: Allow guests to enable InvariantTSC
x86/hyperv: Micro-optimize send_ipi_one()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 syscall entry updates from Ingo Molnar:
"These changes relate to the preparatory cleanup of syscall function
type signatures - to fix indirect call mismatches with Control-Flow
Integrity (CFI) checking.
No change in behavior intended"
* 'x86-entry-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Use the correct function type for native_set_fixmap()
syscalls/x86: Fix function types in COND_SYSCALL
syscalls/x86: Use the correct function type for sys_ni_syscall
syscalls/x86: Use COMPAT_SYSCALL_DEFINE0 for IA32 (rt_)sigreturn
syscalls/x86: Wire up COMPAT_SYSCALL_DEFINE0
syscalls/x86: Use the correct function type in SYSCALL_DEFINE0
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cpu and fpu updates from Ingo Molnar:
- math-emu fixes
- CPUID updates
- sanity-check RDRAND output to see whether the CPU at least pretends
to produce random data
- various unaligned-access across cachelines fixes in preparation of
hardware level split-lock detection
- fix MAXSMP constraints to not allow !CPUMASK_OFFSTACK kernels with
larger than 512 NR_CPUS
- misc FPU related cleanups
* 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu: Align the x86_capability array to size of unsigned long
x86/cpu: Align cpu_caps_cleared and cpu_caps_set to unsigned long
x86/umip: Make the comments vendor-agnostic
x86/Kconfig: Rename UMIP config parameter
x86/Kconfig: Enforce limit of 512 CPUs with MAXSMP and no CPUMASK_OFFSTACK
x86/cpufeatures: Add feature bit RDPRU on AMD
x86/math-emu: Limit MATH_EMULATION to 486SX compatibles
x86/math-emu: Check __copy_from_user() result
x86/rdrand: Sanity-check RDRAND output
* 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/fpu: Use XFEATURE_FP/SSE enum values instead of hardcoded numbers
x86/fpu: Shrink space allocated for xstate_comp_offsets
x86/fpu: Update stale variable name in comment
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 boot updates from Ingo Molnar:
"The main changes were:
- Extend the boot protocol to allow future extensions without hitting
the setup_header size limit.
- Add quirk to devicetree systems to disable the RTC unless it's
listed as a supported device.
- Fix ld.lld linker pedantry"
* 'x86-boot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/boot: Introduce setup_indirect
x86/boot: Introduce kernel_info.setup_type_max
x86/boot: Introduce kernel_info
x86/init: Allow DT configured systems to disable RTC at boot time
x86/realmode: Explicitly set entry point via ENTRY in linker script
|
|
'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 objtool, cleanup, and apic updates from Ingo Molnar:
"Objtool:
- Fix a gawk 5.0 incompatibility in gen-insn-attr-x86.awk. Most
distros are still on gawk 4.2.x.
Cleanup:
- Misc cleanups, plus the removal of obsolete code such as Calgary
IOMMU support, which code hasn't seen any real testing in a long
time and there's no known users left.
apic:
- Two changes: a cleanup and a fix for an (old) race for oneshot
threaded IRQ handlers"
* 'core-objtool-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/insn: Fix awk regexp warnings
* 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86: Remove unused asm/rio.h
x86: Fix typos in comments
x86/pci: Remove #ifdef __KERNEL__ guard from <asm/pci.h>
x86/pci: Remove pci_64.h
x86: Remove the calgary IOMMU driver
x86/apic, x86/uprobes: Correct parameter names in kernel-doc comments
x86/kdump: Remove the unused crash_copy_backup_region()
x86/nmi: Remove stale EDAC include leftover
* 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/ioapic: Rename misnamed functions
x86/ioapic: Prevent inconsistent state when moving an interrupt
|
|
Currently we support only static linking with kernel's libbpf
(tools/lib/bpf). This patch adds libbpf package detection and support to
link perf with it dynamically.
The libbpf package status is displayed with:
$ make VF=1
Auto-detecting system features:
...
... libbpf: [ on ]
It's not checked by default, because it's quite new. Once it's on most
distros we can switch it on.
For the same reason it's not added to the test-all check.
Perf does not need advanced version of libbpf, so we can check just for
the base bpf_object__open function.
Adding new compile variable to detect libbpf package and link bpf
dynamically:
$ make LIBBPF_DYNAMIC=1
...
LINK perf
$ ldd perf | grep bpf
libbpf.so.0 => /lib64/libbpf.so.0 (0x00007f46818bc000)
If libbpf is not installed, build stops with:
Makefile.config:486: *** Error: No libbpf devel library found,\
please install libbpf-devel. Stop.
Committer testing:
$ make LIBBPF_DYNAMIC=1 -C tools/perf O=/tmp/build/perf
make: Entering directory '/home/acme/git/perf/tools/perf'
BUILD: Doing 'make -j8' parallel build
Makefile.config:493: *** Error: No libbpf devel library found, please install libbpf-devel. Stop.
make[1]: *** [Makefile.perf:225: sub-make] Error 2
make: *** [Makefile:70: all] Error 2
make: Leaving directory '/home/acme/git/perf/tools/perf'
$
Signed-off-by: Jiri Olsa <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Toke Høiland-Jørgensen <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Alexei Starovoitov <[email protected]>
Cc: Andrii Nakryiko <[email protected]>
Cc: Daniel Borkmann <[email protected]>
Cc: Jesper Dangaard Brouer <[email protected]>
Cc: Martin KaFai Lau <[email protected]>
Cc: Michael Petlan <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Song Liu <[email protected]>
Cc: Yonghong Song <[email protected]>
Cc: [email protected]
Cc: [email protected]
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
One more step in mergint the maps and map_groups structs.
Cc: Adrian Hunter <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
One more step in merging 'struct maps' with 'struct map_groups'.
Cc: Adrian Hunter <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
One more step in the merge of 'struct maps' with 'struct map_groups'.
Cc: Adrian Hunter <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Continuing the merge of 'struct maps' with 'struct map_groups'.
Cc: Adrian Hunter <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
One more step on the merge of 'struct maps' with 'struct map_groups'.
Cc: Adrian Hunter <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
One more step on the merge of 'struct maps' with 'struct map_groups'.
Cc: Adrian Hunter <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
One more step on the merge of 'struct maps' with 'struct map_groups'.
Cc: Adrian Hunter <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
And pick the shortest name: 'struct maps'.
The split existed because we used to have two groups of maps, one for
functions and one for variables, but that only complicated things,
sometimes we needed to figure out what was at some address and then had
to first try it on the functions group and if that failed, fall back to
the variables one.
That split is long gone, so for quite a while we had only one struct
maps per struct map_groups, simplify things by combining those structs.
First patch is the minimum needed to merge both, follow up patches will
rename 'thread->mg' to 'thread->maps', etc.
Cc: Adrian Hunter <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Add to the "x86 instruction decoder - new instructions" test the following
instructions:
v4fmaddps
v4fmaddss
v4fnmaddps
v4fnmaddss
vaesdec
vaesdeclast
vaesenc
vaesenclast
vcvtne2ps2bf16
vcvtneps2bf16
vdpbf16ps
gf2p8affineinvqb
vgf2p8affineinvqb
gf2p8affineqb
vgf2p8affineqb
gf2p8mulb
vgf2p8mulb
vp2intersectd
vp2intersectq
vp4dpwssd
vp4dpwssds
vpclmulqdq
vpcompressb
vpcompressw
vpdpbusd
vpdpbusds
vpdpwssd
vpdpwssds
vpexpandb
vpexpandw
vpopcntb
vpopcntd
vpopcntq
vpopcntw
vpshldd
vpshldq
vpshldvd
vpshldvq
vpshldvw
vpshldw
vpshrdd
vpshrdq
vpshrdvd
vpshrdvq
vpshrdvw
vpshrdw
vpshufbitqmb
For information about the instructions, refer Intel SDM May 2019
(325462-070US) and Intel Architecture Instruction Set Extensions May
2019 (319433-037).
Committer testing:
$ perf test x86
61: x86 rdpmc : Ok
64: x86 instruction decoder - new instructions : Ok
66: x86 bp modify : Ok
$
Signed-off-by: Adrian Hunter <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Acked-by: Masami Hiramatsu <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: H. Peter Anvin <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Yu-cheng Yu <[email protected]>
Cc: [email protected]
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Add to the opcode map the following instructions:
v4fmaddps
v4fmaddss
v4fnmaddps
v4fnmaddss
vaesdec
vaesdeclast
vaesenc
vaesenclast
vcvtne2ps2bf16
vcvtneps2bf16
vdpbf16ps
gf2p8affineinvqb
vgf2p8affineinvqb
gf2p8affineqb
vgf2p8affineqb
gf2p8mulb
vgf2p8mulb
vp2intersectd
vp2intersectq
vp4dpwssd
vp4dpwssds
vpclmulqdq
vpcompressb
vpcompressw
vpdpbusd
vpdpbusds
vpdpwssd
vpdpwssds
vpexpandb
vpexpandw
vpopcntb
vpopcntd
vpopcntq
vpopcntw
vpshldd
vpshldq
vpshldvd
vpshldvq
vpshldvw
vpshldw
vpshrdd
vpshrdq
vpshrdvd
vpshrdvq
vpshrdvw
vpshrdw
vpshufbitqmb
For information about the instructions, refer Intel SDM May 2019
(325462-070US) and Intel Architecture Instruction Set Extensions May
2019 (319433-037).
The instruction decoding can be tested using the perf tools' "x86
instruction decoder - new instructions" test e.g.
$ perf test -v "new " 2>&1 | grep -i 'v4fmaddps'
Decoded ok: 62 f2 7f 48 9a 20 v4fmaddps (%eax),%zmm0,%zmm4
Decoded ok: 62 f2 7f 48 9a a4 c8 78 56 34 12 v4fmaddps 0x12345678(%eax,%ecx,8),%zmm0,%zmm4
Decoded ok: 62 f2 7f 48 9a 20 v4fmaddps (%rax),%zmm0,%zmm4
Decoded ok: 67 62 f2 7f 48 9a 20 v4fmaddps (%eax),%zmm0,%zmm4
Decoded ok: 62 f2 7f 48 9a a4 c8 78 56 34 12 v4fmaddps 0x12345678(%rax,%rcx,8),%zmm0,%zmm4
Decoded ok: 67 62 f2 7f 48 9a a4 c8 78 56 34 12 v4fmaddps 0x12345678(%eax,%ecx,8),%zmm0,%zmm4
Signed-off-by: Adrian Hunter <[email protected]>
Acked-by: Masami Hiramatsu <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: H. Peter Anvin <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Yu-cheng Yu <[email protected]>
Cc: [email protected]
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
At some point those stopped being used, prune them.
Cc: Adrian Hunter <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
At some point we may have needed that, not anymore.
Cc: Adrian Hunter <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
In 39b12f781271 ("perf tools: Make it possible to read object code from vmlinux")
the actual function was removed, but we forgot to remove the prototype,
fix it.
Cc: Adrian Hunter <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
No need to have it elsewhere.
Cc: Adrian Hunter <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
To pick up BPF changes we'll need.
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
* patchwork: (360 commits)
media: Revert "media: mtk-vcodec: Remove extra area allocation in an input buffer on encoding"
media: hantro: Set H264 FIELDPIC_FLAG_E flag correctly
media: hantro: Remove now unused H264 pic_size
media: hantro: Use output buffer width and height for H264 decoding
media: hantro: Reduce H264 extra space for motion vectors
media: hantro: Fix H264 motion vector buffer offset
media: ti-vpe: vpe: fix compatible to match bindings
media: dt-bindings: media: ti-vpe: Document VPE driver
media: zr364xx: remove redundant assigmnent to idx, clean up code
media: Documentation: media: *_DEFAULT targets for subdevs
media: hantro: Fix s_fmt for dynamic resolution changes
media: i2c: Use the correct style for SPDX License Identifier
media: siano: Use the correct style for SPDX License Identifier
media: vicodec: media_device_cleanup was called too early
media: vim2m: media_device_cleanup was called too early
media: cedrus: Increase maximum supported size
media: cedrus: Fix H264 4k support
media: cedrus: Properly signal size in mode register
media: v4l2-ctrl: Lock main_hdl on operations of requests_queued.
media: si470x-i2c: add missed operations in remove
...
|
|
* acpi-mm:
ACPI: HMAT: use %u instead of %d to print u32 values
ACPI: NUMA: HMAT: fix a section mismatch
ACPI: HMAT: don't mix pxm and nid when setting memory target processor_pxm
ACPI: NUMA: HMAT: Register "soft reserved" memory as an "hmem" device
ACPI: NUMA: HMAT: Register HMAT at device_initcall level
device-dax: Add a driver for "hmem" devices
dax: Fix alloc_dax_region() compile warning
lib: Uplevel the pmem "region" ida to a global allocator
x86/efi: Add efi_fake_mem support for EFI_MEMORY_SP
arm/efi: EFI soft reservation to memblock
x86/efi: EFI soft reservation to E820 enumeration
efi: Common enable/disable infrastructure for EFI soft reservation
x86/efi: Push EFI_MEMMAP check into leaf routines
efi: Enumerate EFI_MEMORY_SP
ACPI: NUMA: Establish a new drivers/acpi/numa/ directory
|
|
* acpi-utils:
iommu/amd: Switch to use acpi_dev_hid_uid_match()
mmc: sdhci-acpi: Switch to use acpi_dev_hid_uid_match()
ACPI / LPSS: Switch to use acpi_dev_hid_uid_match()
ACPI / utils: Introduce acpi_dev_hid_uid_match() helper
ACPI / utils: Move acpi_dev_get_first_match_dev() under CONFIG_ACPI
ACPI / utils: Describe function parameters in kernel-doc
* acpi-platform:
ACPI: platform: Unregister stale platform devices
ACPI: Always build evged in
* acpi-video:
ACPI: video: update doc for acpi_video_bus_DOS()
* acpi-doc:
ACPI: Documentation: Minor spelling fix in namespace.rst
|
|
* acpi-ec:
ACPI: EC: add support for hardware-reduced systems
ACPI: EC: tweak naming in preparation for GpioInt support
* acpi-soc:
ACPI: LPSS: Add dmi quirk for skipping _DEP check for some device-links
ACPI: LPSS: Add LNXVIDEO -> BYT I2C1 to lpss_device_links
ACPI: LPSS: Add LNXVIDEO -> BYT I2C7 to lpss_device_links
* acpi-pmic:
ACPI / PMIC: Add Cherry Trail Crystal Cove PMIC OpRegion driver
ACPI / PMIC: Add byt prefix to Crystal Cove PMIC OpRegion driver
ACPI / PMIC: Do not register handlers for unhandled OpRegions
* acpi-button:
ACPI: button: Remove unused acpi_lid_notifier_[un]register() functions
ACPI: button: Add DMI quirk for Asus T200TA
ACPI: button: Add DMI quirk for Medion Akoya E2215T
ACPI: button: Turn lid_blacklst DMI table into a generic quirk table
ACPI: button: Allow disabling LID support with the lid_init_state module option
ACPI: button: Refactor lid_init_state module parsing code
|
|
* acpica:
ACPICA: Update version to 20191018
ACPICA: debugger: remove leading whitespaces when converting a string to a buffer
ACPICA: acpiexec: initialize all simple types and field units from user input
ACPICA: debugger: add field unit support for acpi_db_get_next_token
ACPICA: debugger: surround field unit output with braces '{'
ACPICA: debugger: add command to dump all fields of particular subtype
ACPICA: utilities: add flag to only display data when dumping buffers
ACPICA: make acpi_load_table() return table index
ACPICA: Add new external interface, acpi_unload_table()
ACPICA: More Clang changes
ACPICA: Win OSL: Replace get_tick_count with get_tick_count64
ACPICA: Results from Clang
|
|
* pm-avs:
ARM: OMAP2+: SmartReflex: add omap_sr_pdata definition
power: avs: smartreflex: Remove superfluous cast in debugfs_create_file() call
* pm-docs:
PM: Wrap documentation to fit in 80 columns
* pm-tools:
cpupower: ToDo: Update ToDo with ideas for per_cpu_schedule handling
cpupower: mperf_monitor: Update cpupower to use the RDPRU instruction
cpupower: mperf_monitor: Introduce per_cpu_schedule flag
cpupower: Move needs_root variable into a sub-struct
cpupower : Handle set and info subcommands correctly
pm-graph info added to MAINTAINERS
tools/power/cpupower: Fix initializer override in hsw_ext_cstates
|
|
* pm-sleep:
PM / wakeirq: remove unnecessary parentheses
PM / core: Clean up some function headers in power.h
PM / hibernate: memory_bm_find_bit(): Tighten node optimisation
* pm-domains:
PM / Domains: Convert to dev_to_genpd_safe() in genpd_syscore_switch()
mmc: tmio: Avoid boilerplate code in ->runtime_suspend()
PM / Domains: Implement the ->start() callback for genpd
PM / Domains: Introduce dev_pm_domain_start()
* pm-opp:
PM / OPP: Support adjusting OPP voltages at runtime
* powercap:
powercap/intel_rapl: add support for Cometlake desktop
powercap/intel_rapl: add support for CometLake Mobile
|
|
* pm-devfreq: (26 commits)
PM / devfreq: tegra30: Tune up MCCPU boost-down coefficient
PM / devfreq: tegra30: Support variable polling interval
PM / devfreq: Add new interrupt_driven flag for governors
PM / devfreq: tegra30: Use kHz units for dependency threshold
PM / devfreq: tegra30: Disable consecutive interrupts when appropriate
PM / devfreq: tegra30: Don't enable already enabled consecutive interrupts
PM / devfreq: tegra30: Include appropriate header
PM / devfreq: tegra30: Constify structs
PM / devfreq: tegra30: Don't enable consecutive-down interrupt on startup
PM / devfreq: tegra30: Reset boosting on startup
PM / devfreq: tegra30: Move clk-notifier's registration to governor's start
PM / devfreq: tegra30: Use CPUFreq notifier
PM / devfreq: tegra30: Use kHz units uniformly in the code
PM / devfreq: tegra30: Fix integer overflow on CPU's freq max out
PM / devfreq: tegra30: Drop write-barrier
PM / devfreq: tegra30: Handle possible round-rate error
PM / devfreq: tegra30: Keep interrupt disabled while governor is stopped
PM / devfreq: tegra30: Change irq type to unsigned int
PM / devfreq: exynos-ppmu: remove useless assignment
PM / devfreq: Lock devfreq in trans_stat_show
...
|
|
* pm-cpufreq: (23 commits)
cpufreq: Register drivers only after CPU devices have been registered
cpufreq: Add NULL checks to show() and store() methods of cpufreq
cpufreq: intel_pstate: Fix plain int as pointer warning from sparse
cpufreq: sun50i: Fix CPU speed bin detection
cpufreq: powernv: fix stack bloat and hard limit on number of CPUs
cpufreq: Clarify the comment in cpufreq_set_policy()
cpufreq: vexpress-spc: find and skip duplicates when merging frequencies
cpufreq: vexpress-spc: use macros instead of hardcoded values for cluster ids
cpufreq: s3c64xx: Remove pointless NULL check in s3c64xx_cpufreq_driver_init
cpufreq: imx-cpufreq-dt: Correct i.MX8MN's default speed grade value
cpufreq: vexpress-spc: fix some coding style issues
cpufreq: vexpress-spc: remove lots of debug messages
cpufreq: vexpress-spc: drop unnessary cpufreq_arm_bL_ops abstraction
cpufreq: merge arm_big_little and vexpress-spc
cpufreq: scpi: remove stale/outdated comment about the driver
ARM: dts: Add OPP-V2 table for AM3517
cpufreq: ti-cpufreq: Add support for AM3517
ARM: dts: omap36xx: using OPP1G needs to control the abb_ldo
cpufreq: ti-cpufreq: omap36xx use "cpu0","vbb" if run in multi_regulator mode
ARM: dts: omap3: bulk convert compatible to be explicitly ti,omap3430 or ti,omap3630 or ti,am3517
...
|