aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2023-11-01dt-bindings: mfd: x-powers,axp152: Make interrupt optional for more chipsAndre Przywara1-1/+4
All X-Powers PMICs described by this binding have an IRQ pin, and so far (almost) all boards connected this to some NMI pin or GPIO on the SoC they are connected to. However we start to see boards that omit this connection, and technically the IRQ pin is not essential to the basic PMIC operation. The existing Linux driver allows skipping the IRQ pin setup for two chips already, so update the binding to also make the DT property optional for the missing chip. And while we are at it, add the AXP313a to that list, as they are actually boards out there not connecting the IRQ pin. This allows to have DTs correctly describing those boards not wiring up the interrupt. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20230919103913.463156-2-andre.przywara@arm.com Signed-off-by: Lee Jones <lee@kernel.org>
2023-11-01mfd: dln2: Fix double put in dln2_probeDinghao Liu1-1/+0
The dln2_free() already contains usb_put_dev(). Therefore, the redundant usb_put_dev() before dln2_free() may lead to a double free. Fixes: 96da8f148396 ("mfd: dln2: Fix memory leak in dln2_probe()") Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Link: https://lore.kernel.org/r/20230925024134.9683-1-dinghao.liu@zju.edu.cn Signed-off-by: Lee Jones <lee@kernel.org>
2023-11-01mfd: max8998: Simplify obtaining I2C match data and drop ↵Biju Das1-11/+1
max8998_i2c_get_driver_data() Simplify probe() by using i2c_get_match_data() instead of max8998_i2c_get_driver_data() for retrieving match data from OF/ID tables. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230923174928.56824-5-biju.das.jz@bp.renesas.com Signed-off-by: Lee Jones <lee@kernel.org>
2023-11-01mfd: max77541: Simplify obtaining I2C match dataBiju Das1-5/+1
Simplify probe() by replacing device_get_match_data() and ID lookup for retrieving match data by i2c_get_match_data(). Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20230923174928.56824-4-biju.das.jz@bp.renesas.com Signed-off-by: Lee Jones <lee@kernel.org>
2023-11-01mfd: madera-i2c: Simplify obtaining I2C match dataBiju Das1-8/+1
Simplify probe() by replacing of_device_get_match_data() and ID lookup for retrieving match data by i2c_get_match_data(). Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20230923174928.56824-3-biju.das.jz@bp.renesas.com Signed-off-by: Lee Jones <lee@kernel.org>
2023-11-01mfd: arizona-i2c: Simplify obtaining I2C match dataBiju Das1-9/+2
Simplify probe() by replacing device_get_match_data() and ID lookup for retrieving match data by i2c_get_match_data(). After this drop intializing the variable type. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Tested-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20230923174928.56824-2-biju.das.jz@bp.renesas.com Signed-off-by: Lee Jones <lee@kernel.org>
2023-11-01mfd: iqs62x: Annotate struct iqs62x_fw_blk with __counted_byKees Cook1-1/+1
Prepare for the coming implementation by GCC and Clang of the __counted_by attribute. Flexible array members annotated with __counted_by can have their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS (for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family functions). As found with Coccinelle[1], add __counted_by for struct iqs62x_fw_blk. [1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/r/20230922175337.work.150-kees@kernel.org Signed-off-by: Lee Jones <lee@kernel.org>
2023-11-01mfd: stm32-timers: Add support for interruptsFabrice Gasnier2-0/+57
There are two types of STM32 timers that may have: - a global interrupt line - 4 dedicated interrupt lines. Those interrupts are optional as defined in the dt-bindings. Enforce checks on either one, four or no interrupts are provided with their names. Optionally get them here, to be used by child devices. Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Link: https://lore.kernel.org/r/20230829134029.2402868-5-fabrice.gasnier@foss.st.com Signed-off-by: Lee Jones <lee@kernel.org>
2023-11-01mfd: twl-core: Add a clock subdevice for the TWL6032Andreas Kemnade1-0/+16
Clock device needs no separate devicetree node, so add it as a platform device. Other devices in the family also have controllable clocks, but due to the lack of testing, just add it for the TWL6032 now. Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Link: https://lore.kernel.org/r/20230916100515.1650336-4-andreas@kemnade.info Signed-off-by: Lee Jones <lee@kernel.org>
2023-11-01dt-bindings: mfd: ti,twl: Add clock provider propertiesAndreas Kemnade1-0/+3
Since these devices provide clock outputs, add the corresponding property. Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20230916100515.1650336-3-andreas@kemnade.info Signed-off-by: Lee Jones <lee@kernel.org>
2023-11-01dt-bindings: mfd: Convert twl-family.txt to json-schemaAndreas Kemnade3-47/+65
Convert the TWL[46]030 binding to DT schema format. To do it as a step by step work, do not include / handle nodes for subdevices yet, just convert things with minimal corrections. There are already some bindings for its subdevices in the tree. Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20230916100515.1650336-2-andreas@kemnade.info Signed-off-by: Lee Jones <lee@kernel.org>
2023-11-01mfd: atmel-hlcdc: Add compatible for sam9x75 XLCD controllerManikandan Muralidharan1-0/+1
Add compatible for sam9x75 XLCD controller. Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com> Link: https://lore.kernel.org/r/20230915104849.187146-2-manikandan.m@microchip.com Signed-off-by: Lee Jones <lee@kernel.org>
2023-11-01dt-bindings: mfd: syscon: Add ti,am654-dss-oldi-io-ctrl compatibleAndrew Davis1-0/+1
Add TI DSS OLDI-IO control registers compatible. This is a region of 5 32bit registers found in the TI AM65 CTRL_MMR0 register space[0]. They are used to control the characteristics of the OLDI DATA/CLK IO as needed by the DSS display controller node. [0] https://www.ti.com/lit/pdf/spruid7 Signed-off-by: Andrew Davis <afd@ti.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Aradhya Bhatia <a-bhatia1@ti.com> Link: https://lore.kernel.org/r/20230911142556.64108-1-afd@ti.com Signed-off-by: Lee Jones <lee@kernel.org>
2023-11-01mfd: ab8500: Remove non-existent configuration "#ifdef CONFIG_AB8500_DEBUG"Ying Sun1-6/+0
The CONFIG_AB8500_DEBUG has been deleted in: 3d4d1266597c0 ("mfd: ab8500: Drop debugfs module") The condition "#ifdef CONFIG_AB8500_DEBUG" in: include/linux/mfd/abx500/ab8500.h:502 ...cannot be valid. It is recommended to delete redundant code. Suggested-by: Yanjie Ren <renyanjie01@gmail.com> Signed-off-by: Ying Sun <sunying@nj.iscas.ac.cn> Link: https://lore.kernel.org/r/20230913084559.18141-1-sunying@nj.iscas.ac.cn Signed-off-by: Lee Jones <lee@kernel.org>
2023-11-01mfd: wcd934x: Update to use maple tree register cacheMark Brown1-1/+1
The maple tree register cache is based on a much more modern data structure than the rbtree cache and makes optimisation choices which are probably more appropriate for modern systems than those made by the rbtree cache. In v6.5 it has also acquired the ability to generate multi-register writes in sync operations, bringing performance up to parity with the rbtree cache there. Update the wcd934x to use the more modern data structure. Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20230912-mfd-wcd934x-maple-v2-1-292a154113e3@kernel.org Signed-off-by: Lee Jones <lee@kernel.org>
2023-11-01dt-bindings: mfd: maxim,max8998: Convert to DT schemaKrzysztof Kozlowski2-125/+324
Convert the bindings for Maxim MAX8998, National/TI LP3974 Power Management IC to DT schema. Adjust example to real DTS and make second interrupt optional (like on s5pv210-aries.dtsi). Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20230911120135.37528-1-krzysztof.kozlowski@linaro.org Signed-off-by: Lee Jones <lee@kernel.org>
2023-11-01dt-bindings: mfd: qcom,tcsr: Add compatible for sm4450Tengfei Fan1-0/+1
Document the qcom,sm4450-tcsr compatible. Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230908065847.28382-3-quic_tengfan@quicinc.com Signed-off-by: Lee Jones <lee@kernel.org>
2023-11-01mfd: axp20x: Generalise handling without interruptAndre Przywara1-20/+24
At the moment we allow the AXP15060 and the AXP806 PMICs to omit the interrupt line to the SoC, and we skip registering the PEK (power key) driver in this case, since that crashes when no IRQ is described in the DT node. The IRQ pin potentially not being connected to anything does affect more PMICs, though, and the PEK driver is not the only one requiring an interrupt: at least the AC power supply driver crashes in a similar fashion. Generalise the handling of AXP MFD devices when the platform tables describe no interrupt, by allowing each device to specify an alternative MFD list for this case. If no specific alternative is specified, we go with the safe default of "just the regulators", which matches the current situation. This enables new devices using the AXP313a PMIC, but not connecting the IRQ pin. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20230828213229.20332-1-andre.przywara@arm.com Signed-off-by: Lee Jones <lee@kernel.org>
2023-11-01mfd: palmas: Make similar OF and ID tableBiju Das1-5/+5
Make similar OF and ID table to extend support for ID match using i2c_match_data(). Currently it works only for OF match tables as the driver_data is wrong for ID match. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20230831183153.63750-5-biju.das.jz@bp.renesas.com Signed-off-by: Lee Jones <lee@kernel.org>
2023-11-01mfd: palmas: Move OF table closer to its consumerBiju Das1-17/+8
Move OF table near to the user. While at it, arrange compatible and data in single line. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20230831183153.63750-4-biju.das.jz@bp.renesas.com Signed-off-by: Lee Jones <lee@kernel.org>
2023-11-01mfd: palmas: Constify .data in OF table and {palmas,tps65917}_irq_chipBiju Das1-16/+11
Constify .data in OF table and {palmas,tps65917}_irq_chip and replace the variable *features->features in struct palmas_driver_data and drop the {palmas,tps659038}_features variables and use their values directly in the named initialization. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20230831183153.63750-3-biju.das.jz@bp.renesas.com Signed-off-by: Lee Jones <lee@kernel.org>
2023-11-01mfd: palmas: Remove trailing comma in the terminator entryBiju Das1-1/+1
Remove trailing comma in the terminator entry for OF table. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20230831183153.63750-2-biju.das.jz@bp.renesas.com Signed-off-by: Lee Jones <lee@kernel.org>
2023-11-01dt-bindings: mfd: stericsson,db8500-prcmu: Spelling s/Cortex A-/Cortex-A/Geert Uytterhoeven1-1/+1
Fix a misspelling of "Cortex-A9". Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/0789000f012122a7fa27ef709c738101b00cd834.1693407196.git.geert+renesas@glider.be Signed-off-by: Lee Jones <lee@kernel.org>
2023-11-01dt-bindings: mfd: syscon: Add rockchip,rk3128-qos compatibleAlex Bee1-0/+1
Document Rockchip RK3128 SoC compatible for qos registers. Signed-off-by: Alex Bee <knaerzche@gmail.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230829171647.187787-2-knaerzche@gmail.com Signed-off-by: Lee Jones <lee@kernel.org>
2023-11-01mfd: core: Ensure disabled devices are skipped without abortingHerve Codina1-5/+12
The loop searching for a matching device based on its compatible string is aborted when a matching disabled device is found. This abort prevents to add devices as soon as one disabled device is found. Continue searching for an other device instead of aborting on the first disabled one fixes the issue. Fixes: 22380b65dc70 ("mfd: mfd-core: Ensure disabled devices are ignored without error") Signed-off-by: Herve Codina <herve.codina@bootlin.com> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Link: https://lore.kernel.org/r/528425d6472176bb1d02d79596b51f8c28a551cc.1692376361.git.christophe.leroy@csgroup.eu Signed-off-by: Lee Jones <lee@kernel.org>
2023-11-01dt-bindings: mfd: qcom,spmi-pmic: Add typec to SPMI device typesBryan O'Donoghue1-0/+4
Add the PMIC Type-C port driver to the list of devices. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230816115151.501736-2-bryan.odonoghue@linaro.org Signed-off-by: Lee Jones <lee@kernel.org>
2023-11-01mfd: max8997: Simplify obtaining I2C match data and drop ↵Biju Das1-11/+1
max8997_i2c_get_driver_data() Simplify probe() by using i2c_get_match_data() instead of max8997_i2c_get_driver_data() for retrieving match data from OF/ID tables. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230828160224.92037-1-biju.das.jz@bp.renesas.com Signed-off-by: Lee Jones <lee@kernel.org>
2023-11-01mfd: core: Un-constify mfd_cell.of_regMichał Mirosław1-1/+1
Enable dynamically filling in the whole mfd_cell structure. All other fields already allow that. Fixes: 466a62d7642f ("mfd: core: Make a best effort attempt to match devices with the correct of_nodes") Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Link: https://lore.kernel.org/r/b73fe4bc4bd6ba1af90940a640ed65fe254c0408.1693253717.git.mirq-linux@rere.qmqm.pl Signed-off-by: Lee Jones <lee@kernel.org>
2023-11-01dt-bindings: mfd: qcom-pm8xxx: Add missing child nodesDmitry Baryshkov1-1/+25
Add gpio, keypad, led, mpps, pwrkey, vibrator and xoadc as possible child nodes of qcom,pm8xxx, referencing existint schema files. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230827132525.951475-3-dmitry.baryshkov@linaro.org Signed-off-by: Lee Jones <lee@kernel.org>
2023-11-01dt-bindings: mfd: qcom-spmi-pmic: Add pm8450 entryDmitry Baryshkov1-0/+1
Add bindings for the PM8450 PMIC (qcom,pm8450). No driver changes are necessary, since the PMIC is handled by the generic qcom,spmi-pmic entry. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230821232532.3110607-1-dmitry.baryshkov@linaro.org Signed-off-by: Lee Jones <lee@kernel.org>
2023-11-01Merge tag 'ib-mfd-i2c-reboot-v6.7' into ibs-for-mfd-mergedLee Jones4-9/+50
Immutable branch between MFD, I2C and Reboot due for the v6.7 merge window
2023-09-10Linux 6.6-rc1Linus Torvalds1-2/+2
2023-09-10Merge tag 'topic/drm-ci-2023-08-31-1' of git://anongit.freedesktop.org/drm/drmLinus Torvalds68-0/+5508
Pull drm ci scripts from Dave Airlie: "This is a bunch of ci integration for the freedesktop gitlab instance where we currently do upstream userspace testing on diverse sets of GPU hardware. From my perspective I think it's an experiment worth going with and seeing how the benefits/noise playout keeping these files useful. Ideally I'd like to get this so we can do pre-merge testing on PRs eventually. Below is some info from danvet on why we've ended up making the decision and how we can roll it back if we decide it was a bad plan. Why in upstream? - like documentation, testcases, tools CI integration is one of these things where you can waste endless amounts of time if you accidentally have a version that doesn't match your source code - but also like the above, there's a balance, this is the initial cut of what we think makes sense to keep in sync vs out-of-tree, probably needs adjustment - gitlab supports out-of-repo gitlab integration and that's what's been used for the kernel in drm, but it results in per-driver fragmentation and lots of duplicated effort. the simple act of smashing an arbitrary winner into a topic branch already started surfacing patches on dri-devel and sparking good cross driver team discussions Why gitlab? - it's not any more shit than any of the other CI - drm userspace uses it extensively for everything in userspace, we have a lot of people and experience with this, including integration of hw testing labs - media userspace like gstreamer is also on gitlab.fd.o, and there's discussion to extend this to the media subsystem in some fashion Can this be shared? - there's definitely a pile of code that could move to scripts/ if other subsystem adopt ci integration in upstream kernel git. other bits are more drm/gpu specific like the igt-gpu-tests/tools integration - docker images can be run locally or in other CI runners Will we regret this? - it's all in one directory, intentionally, for easy deletion - probably 1-2 years in upstream to see whether this is worth it or a Big Mistake. that's roughly what it took to _really_ roll out solid CI in the bigger userspace projects we have on gitlab.fd.o like mesa3d" * tag 'topic/drm-ci-2023-08-31-1' of git://anongit.freedesktop.org/drm/drm: drm: ci: docs: fix build warning - add missing escape drm: Add initial ci/ subdirectory
2023-09-10Merge tag 'x86-urgent-2023-09-10' of ↵Linus Torvalds6-11/+20
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "Fix preemption delays in the SGX code, remove unnecessarily UAPI-exported code, fix a ld.lld linker (in)compatibility quirk and make the x86 SMP init code a bit more conservative to fix kexec() lockups" * tag 'x86-urgent-2023-09-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/sgx: Break up long non-preemptible delays in sgx_vepc_release() x86: Remove the arch_calc_vm_prot_bits() macro from the UAPI x86/build: Fix linker fill bytes quirk/incompatibility for ld.lld x86/smp: Don't send INIT to non-present and non-booted CPUs
2023-09-10Merge tag 'perf-urgent-2023-09-10' of ↵Linus Torvalds1-1/+11
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 perf event fix from Ingo Molnar: "Work around a firmware bug in the uncore PMU driver, affecting certain Intel systems" * tag 'perf-urgent-2023-09-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/uncore: Correct the number of CHAs on EMR
2023-09-09Merge tag 'perf-tools-for-v6.6-1-2023-09-05' of ↵Linus Torvalds284-9119/+8011
git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools Pull perf tools updates from Arnaldo Carvalho de Melo: "perf tools maintainership: - Add git information for perf-tools and perf-tools-next trees and branches to the MAINTAINERS file. That is where development now takes place and myself and Namhyung Kim have write access, more people to come as we emulate other maintainer groups. perf record: - Record kernel data maps when 'perf record --data' is used, so that global variables can be resolved and used in tools that do data profiling. perf trace: - Remove the old, experimental support for BPF events in which a .c file was passed as an event: "perf trace -e hello.c" to then get compiled and loaded. The only known usage for that, that shipped with the kernel as an example for such events, augmented the raw_syscalls tracepoints and was converted to a libbpf skeleton, reusing all the user space components and the BPF code connected to the syscalls. In the end just the way to glue the BPF part and the user space type beautifiers changed, now being performed by libbpf skeletons. The next step is to use BTF to do pretty printing of all syscall types, as discussed with Alan Maguire and others. Now, on a perf built with BUILD_BPF_SKEL=1 we get most if not all path/filenames/strings, some of the networking data structures, perf_event_attr, etc, i.e. systemwide tracing of nanosleep calls and perf_event_open syscalls while 'perf stat' runs 'sleep' for 5 seconds: # perf trace -a -e *nanosleep,perf* perf stat -e cycles,instructions sleep 5 0.000 ( 9.034 ms): perf/327641 perf_event_open(attr_uptr: { type: 0 (PERF_TYPE_HARDWARE), size: 136, config: 0 (PERF_COUNT_HW_CPU_CYCLES), sample_type: IDENTIFIER, read_format: TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING, disabled: 1, inherit: 1, enable_on_exec: 1, exclude_guest: 1 }, pid: 327642 (perf), cpu: -1, group_fd: -1, flags: FD_CLOEXEC) = 3 9.039 ( 0.006 ms): perf/327641 perf_event_open(attr_uptr: { type: 0 (PERF_TYPE_HARDWARE), size: 136, config: 0x1 (PERF_COUNT_HW_INSTRUCTIONS), sample_type: IDENTIFIER, read_format: TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING, disabled: 1, inherit: 1, enable_on_exec: 1, exclude_guest: 1 }, pid: 327642 (perf-exec), cpu: -1, group_fd: -1, flags: FD_CLOEXEC) = 4 ? ( ): gpm/991 ... [continued]: clock_nanosleep()) = 0 10.133 ( ): sleep/327642 clock_nanosleep(rqtp: { .tv_sec: 5, .tv_nsec: 0 }, rmtp: 0x7ffd36f83ed0) ... ? ( ): pool-gsd-smart/3051 ... [continued]: clock_nanosleep()) = 0 30.276 ( ): gpm/991 clock_nanosleep(rqtp: { .tv_sec: 2, .tv_nsec: 0 }, rmtp: 0x7ffcc6f73710) ... 223.215 (1000.430 ms): pool-gsd-smart/3051 clock_nanosleep(rqtp: { .tv_sec: 1, .tv_nsec: 0 }, rmtp: 0x7f6e7fffec90) = 0 30.276 (2000.394 ms): gpm/991 ... [continued]: clock_nanosleep()) = 0 1230.814 ( ): pool-gsd-smart/3051 clock_nanosleep(rqtp: { .tv_sec: 1, .tv_nsec: 0 }, rmtp: 0x7f6e7fffec90) ... 1230.814 (1000.404 ms): pool-gsd-smart/3051 ... [continued]: clock_nanosleep()) = 0 2030.886 ( ): gpm/991 clock_nanosleep(rqtp: { .tv_sec: 2, .tv_nsec: 0 }, rmtp: 0x7ffcc6f73710) ... 2237.709 (1000.153 ms): pool-gsd-smart/3051 clock_nanosleep(rqtp: { .tv_sec: 1, .tv_nsec: 0 }, rmtp: 0x7f6e7fffec90) = 0 ? ( ): crond/1172 ... [continued]: clock_nanosleep()) = 0 3242.699 ( ): pool-gsd-smart/3051 clock_nanosleep(rqtp: { .tv_sec: 1, .tv_nsec: 0 }, rmtp: 0x7f6e7fffec90) ... 2030.886 (2000.385 ms): gpm/991 ... [continued]: clock_nanosleep()) = 0 3728.078 ( ): crond/1172 clock_nanosleep(rqtp: { .tv_sec: 60, .tv_nsec: 0 }, rmtp: 0x7ffe0971dcf0) ... 3242.699 (1000.158 ms): pool-gsd-smart/3051 ... [continued]: clock_nanosleep()) = 0 4031.409 ( ): gpm/991 clock_nanosleep(rqtp: { .tv_sec: 2, .tv_nsec: 0 }, rmtp: 0x7ffcc6f73710) ... 10.133 (5000.375 ms): sleep/327642 ... [continued]: clock_nanosleep()) = 0 Performance counter stats for 'sleep 5': 2,617,347 cycles 1,855,997 instructions # 0.71 insn per cycle 5.002282128 seconds time elapsed 0.000855000 seconds user 0.000852000 seconds sys perf annotate: - Building with binutils' libopcode now is opt-in (BUILD_NONDISTRO=1) for licensing reasons, and we missed a build test on tools/perf/tests makefile. Since we now default to NDEBUG=1, we ended up segfaulting when building with BUILD_NONDISTRO=1 because a needed initialization routine was being "error checked" via an assert. Fix it by explicitly checking the result and aborting instead if it fails. We better back propagate the error, but at least 'perf annotate' on samples collected for a BPF program is back working when perf is built with BUILD_NONDISTRO=1. perf report/top: - Add back TUI hierarchy mode header, that is seen when using 'perf report/top --hierarchy'. - Fix the number of entries for 'e' key in the TUI that was preventing navigation of lines when expanding an entry. perf report/script: - Support cross platform register handling, allowing a perf.data file collected on one architecture to have registers sampled correctly displayed when analysis tools such as 'perf report' and 'perf script' are used on a different architecture. - Fix handling of event attributes in pipe mode, i.e. when one uses: perf record -o - | perf report -i - When no perf.data files are used. - Handle files generated via pipe mode with a version of perf and then read also via pipe mode with a different version of perf, where the event attr record may have changed, use the record size field to properly support this version mismatch. perf probe: - Accessing global variables from uprobes isn't supported, make the error message state that instead of stating that some minimal kernel version is needed to have that feature. This seems just a tool limitation, the kernel probably has all that is needed. perf tests: - Fix a reference count related leak in the dlfilter v0 API where the result of a thread__find_symbol_fb() is not matched with an addr_location__exit() to drop the reference counts of the resolved components (machine, thread, map, symbol, etc). Add a dlfilter test to make sure that doesn't regresses. - Lots of fixes for the 'perf test' written in shell script related to problems found with the shellcheck utility. - Fixes for 'perf test' shell scripts testing features enabled when perf is built with BUILD_BPF_SKEL=1, such as 'perf stat' bpf counters. - Add perf record sample filtering test, things like the following example, that gets implemented as a BPF filter attached to the event: # perf record -e task-clock -c 10000 --filter 'ip < 0xffffffff00000000' - Improve the way the task_analyzer test checks if libtraceevent is linked, using 'perf version --build-options' instead of the more expensinve 'perf record -e "sched:sched_switch"'. - Add support for riscv in the mmap-basic test. (This went as well via the RiscV tree, same contents). libperf: - Implement riscv mmap support (This went as well via the RiscV tree, same contents). perf script: - New tool that converts perf.data files to the firefox profiler format so that one can use the visualizer at https://profiler.firefox.com/. Done by Anup Sharma as part of this year's Google Summer of Code. One can generate the output and upload it to the web interface but Anup also automated everything: perf script gecko -F 99 -a sleep 60 - Support syscall name parsing on arm64. - Print "cgroup" field on the same line as "comm". perf bench: - Add new 'uprobe' benchmark to measure the overhead of uprobes with/without BPF programs attached to it. - breakpoints are not available on power9, skip that test. perf stat: - Add #num_cpus_online literal to be used in 'perf stat' metrics, and add this extra 'perf test' check that exemplifies its purpose: TEST_ASSERT_VAL("#num_cpus_online", expr__parse(&num_cpus_online, ctx, "#num_cpus_online") == 0); TEST_ASSERT_VAL("#num_cpus", expr__parse(&num_cpus, ctx, "#num_cpus") == 0); TEST_ASSERT_VAL("#num_cpus >= #num_cpus_online", num_cpus >= num_cpus_online); Miscellaneous: - Improve tool startup time by lazily reading PMU, JSON, sysfs data. - Improve error reporting in the parsing of events, passing YYLTYPE to error routines, so that the output can show were the parsing error was found. - Add 'perf test' entries to check the parsing of events improvements. - Fix various leak for things detected by -fsanitize=address, mostly things that would be freed at tool exit, including: - Free evsel->filter on the destructor. - Allow tools to register a thread->priv destructor and use it in 'perf trace'. - Free evsel->priv in 'perf trace'. - Free string returned by synthesize_perf_probe_point() when the caller fails to do all it needs. - Adjust various compiler options to not consider errors some warnings when building with broken headers found in things like python, flex, bison, as we otherwise build with -Werror. Some for gcc, some for clang, some for some specific version of those, some for some specific version of flex or bison, or some specific combination of these components, bah. - Allow customization of clang options for BPF target, this helps building on gentoo where there are other oddities where BPF targets gets passed some compiler options intended for the native build, so building with WERROR=0 helps while these oddities are fixed. - Dont pass ERR_PTR() values to perf_session__delete() in 'perf top' and 'perf lock', fixing some segfaults when handling some odd failures. - Add LTO build option. - Fix format of unordered lists in the perf docs (tools/perf/Documentation) - Overhaul the bison files, using constructs such as YYNOMEM. - Remove unused tokens from the bison .y files. - Add more comments to various structs. - A few LoongArch enablement patches. Vendor events (JSON): - Add JSON metrics for Yitian 710 DDR (aarch64). Things like: EventName, BriefDescription visible_window_limit_reached_rd, "At least one entry in read queue reaches the visible window limit.", visible_window_limit_reached_wr, "At least one entry in write queue reaches the visible window limit.", op_is_dqsosc_mpc , "A DQS Oscillator MPC command to DRAM.", op_is_dqsosc_mrr , "A DQS Oscillator MRR command to DRAM.", op_is_tcr_mrr , "A Temperature Compensated Refresh(TCR) MRR command to DRAM.", - Add AmpereOne metrics (aarch64). - Update N2 and V2 metrics (aarch64) and events using Arm telemetry repo. - Update scale units and descriptions of common topdown metrics on aarch64. Things like: - "MetricExpr": "stall_slot_frontend / (#slots * cpu_cycles)", - "BriefDescription": "Frontend bound L1 topdown metric", + "MetricExpr": "100 * (stall_slot_frontend / (#slots * cpu_cycles))", + "BriefDescription": "This metric is the percentage of total slots that were stalled due to resource constraints in the frontend of the processor.", - Update events for intel: meteorlake to 1.04, sapphirerapids to 1.15, Icelake+ metric constraints. - Update files for the power10 platform" * tag 'perf-tools-for-v6.6-1-2023-09-05' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (217 commits) perf parse-events: Fix driver config term perf parse-events: Fixes relating to no_value terms perf parse-events: Fix propagation of term's no_value when cloning perf parse-events: Name the two term enums perf list: Don't print Unit for "default_core" perf vendor events intel: Fix modifier in tma_info_system_mem_parallel_reads for skylake perf dlfilter: Avoid leak in v0 API test use of resolve_address() perf metric: Add #num_cpus_online literal perf pmu: Remove str from perf_pmu_alias perf parse-events: Make common term list to strbuf helper perf parse-events: Minor help message improvements perf pmu: Avoid uninitialized use of alias->str perf jevents: Use "default_core" for events with no Unit perf test stat_bpf_counters_cgrp: Enhance perf stat cgroup BPF counter test perf test shell stat_bpf_counters: Fix test on Intel perf test shell record_bpf_filter: Skip 6.2 kernel libperf: Get rid of attr.id field perf tools: Convert to perf_record_header_attr_id() libperf: Add perf_record_header_attr_id() perf tools: Handle old data in PERF_RECORD_ATTR ...
2023-09-09Merge tag '6.6-rc-smb3-client-fixes-part2' of ↵Linus Torvalds14-19/+43
git://git.samba.org/sfrench/cifs-2.6 Pull smb client fixes from Steve French: - six smb3 client fixes including ones to allow controlling smb3 directory caching timeout and limits, and one debugging improvement - one fix for nls Kconfig (don't need to expose NLS_UCS2_UTILS option) - one minor spnego registry update * tag '6.6-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6: spnego: add missing OID to oid registry smb3: fix minor typo in SMB2_GLOBAL_CAP_LARGE_MTU cifs: update internal module version number for cifs.ko smb3: allow controlling maximum number of cached directories smb3: add trace point for queryfs (statfs) nls: Hide new NLS_UCS2_UTILS smb3: allow controlling length of time directory entries are cached with dir leases smb: propagate error code of extract_sharename()
2023-09-09iov_iter: Kunit tests for page extractionDavid Howells1-0/+240
Add some kunit tests for page extraction for ITER_BVEC, ITER_KVEC and ITER_XARRAY type iterators. ITER_UBUF and ITER_IOVEC aren't dealt with as they require userspace VM interaction. ITER_DISCARD isn't dealt with either as that can't be extracted. Signed-off-by: David Howells <dhowells@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Christian Brauner <brauner@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: David Hildenbrand <david@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-09-09iov_iter: Kunit tests for copying to/from an iteratorDavid Howells3-0/+549
Add some kunit tests for page extraction for ITER_BVEC, ITER_KVEC and ITER_XARRAY type iterators. ITER_UBUF and ITER_IOVEC aren't dealt with as they require userspace VM interaction. ITER_DISCARD isn't dealt with either as that does nothing. Signed-off-by: David Howells <dhowells@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Christian Brauner <brauner@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: David Hildenbrand <david@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-09-09iov_iter: Fix iov_iter_extract_pages() with zero-sized entriesDavid Howells1-15/+15
iov_iter_extract_pages() doesn't correctly handle skipping over initial zero-length entries in ITER_KVEC and ITER_BVEC-type iterators. The problem is that it accidentally reduces maxsize to 0 when it skipping and thus runs to the end of the array and returns 0. Fix this by sticking the calculated size-to-copy in a new variable rather than back in maxsize. Fixes: 7d58fe731028 ("iov_iter: Add a function to extract a page list from an iterator") Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Christian Brauner <brauner@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: David Hildenbrand <david@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-09-09Merge tag 'sh-for-v6.6-tag1' of ↵Linus Torvalds6-12/+8
git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux Pull sh updates from Adrian Glaubitz: - Fix a use-after-free bug in the push-switch driver (Duoming Zhou) - Fix calls to dma_declare_coherent_memory() that incorrectly passed the buffer end address instead of the buffer size as the size parameter * tag 'sh-for-v6.6-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux: sh: push-switch: Reorder cleanup operations to avoid use-after-free bug sh: boards: Fix CEU buffer size passed to dma_declare_coherent_memory()
2023-09-09Merge tag 'riscv-for-linus-6.6-mw2-2' of ↵Linus Torvalds51-216/+1440
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull more RISC-V updates from Palmer Dabbelt: - The kernel now dynamically probes for misaligned access speed, as opposed to relying on a table of known implementations. - Support for non-coherent devices on systems using the Andes AX45MP core, including the RZ/Five SoCs. - Support for the V extension in ptrace(), again. - Support for KASLR. - Support for the BPF prog pack allocator in RISC-V. - A handful of bug fixes and cleanups. * tag 'riscv-for-linus-6.6-mw2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (25 commits) soc: renesas: Kconfig: For ARCH_R9A07G043 select the required configs if dependencies are met riscv: Kconfig.errata: Add dependency for RISCV_SBI in ERRATA_ANDES config riscv: Kconfig.errata: Drop dependency for MMU in ERRATA_ANDES_CMO config riscv: Kconfig: Select DMA_DIRECT_REMAP only if MMU is enabled bpf, riscv: use prog pack allocator in the BPF JIT riscv: implement a memset like function for text riscv: extend patch_text_nosync() for multiple pages bpf: make bpf_prog_pack allocator portable riscv: libstub: Implement KASLR by using generic functions libstub: Fix compilation warning for rv32 arm64: libstub: Move KASLR handling functions to kaslr.c riscv: Dump out kernel offset information on panic riscv: Introduce virtual kernel mapping KASLR RISC-V: Add ptrace support for vectors soc: renesas: Kconfig: Select the required configs for RZ/Five SoC cache: Add L2 cache management for Andes AX45MP RISC-V core dt-bindings: cache: andestech,ax45mp-cache: Add DT binding documentation for L2 cache controller riscv: mm: dma-noncoherent: nonstandard cache operations support riscv: errata: Add Andes alternative ports riscv: asm: vendorid_list: Add Andes Technology to the vendors list ...
2023-09-09sh: push-switch: Reorder cleanup operations to avoid use-after-free bugDuoming Zhou1-1/+1
The original code puts flush_work() before timer_shutdown_sync() in switch_drv_remove(). Although we use flush_work() to stop the worker, it could be rescheduled in switch_timer(). As a result, a use-after-free bug can occur. The details are shown below: (cpu 0) | (cpu 1) switch_drv_remove() | flush_work() | ... | switch_timer // timer | schedule_work(&psw->work) timer_shutdown_sync() | ... | switch_work_handler // worker kfree(psw) // free | | psw->state = 0 // use This patch puts timer_shutdown_sync() before flush_work() to mitigate the bugs. As a result, the worker and timer will be stopped safely before the deallocate operations. Fixes: 9f5e8eee5cfe ("sh: generic push-switch framework.") Signed-off-by: Duoming Zhou <duoming@zju.edu.cn> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Link: https://lore.kernel.org/r/20230802033737.9738-1-duoming@zju.edu.cn Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
2023-09-09sh: boards: Fix CEU buffer size passed to dma_declare_coherent_memory()Petr Tesarik5-11/+7
In all these cases, the last argument to dma_declare_coherent_memory() is the buffer end address, but the expected value should be the size of the reserved region. Fixes: 39fb993038e1 ("media: arch: sh: ap325rxa: Use new renesas-ceu camera driver") Fixes: c2f9b05fd5c1 ("media: arch: sh: ecovec: Use new renesas-ceu camera driver") Fixes: f3590dc32974 ("media: arch: sh: kfr2r09: Use new renesas-ceu camera driver") Fixes: 186c446f4b84 ("media: arch: sh: migor: Use new renesas-ceu camera driver") Fixes: 1a3c230b4151 ("media: arch: sh: ms7724se: Use new renesas-ceu camera driver") Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Link: https://lore.kernel.org/r/20230724120742.2187-1-petrtesarik@huaweicloud.com Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
2023-09-09Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds44-319/+1433
Pull more SCSI updates from James Bottomley: "Mostly small stragglers that missed the initial merge. Driver updates are qla2xxx and smartpqi (mp3sas has a high diffstat due to the volatile qualifier removal, fnic due to unused function removal and sd.c has a lot of code shuffling to remove forward declarations)" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (38 commits) scsi: ufs: core: No need to update UPIU.header.flags and lun in advanced RPMB handler scsi: ufs: core: Add advanced RPMB support where UFSHCI 4.0 does not support EHS length in UTRD scsi: mpt3sas: Remove volatile qualifier scsi: mpt3sas: Perform additional retries if doorbell read returns 0 scsi: libsas: Simplify sas_queue_reset() and remove unused code scsi: ufs: Fix the build for the old ARM OABI scsi: qla2xxx: Fix unused variable warning in qla2xxx_process_purls_pkt() scsi: fnic: Remove unused functions fnic_scsi_host_start/end_tag() scsi: qla2xxx: Fix spelling mistake "tranport" -> "transport" scsi: fnic: Replace sgreset tag with max_tag_id scsi: qla2xxx: Remove unused variables in qla24xx_build_scsi_type_6_iocbs() scsi: qla2xxx: Fix nvme_fc_rcv_ls_req() undefined error scsi: smartpqi: Change driver version to 2.1.24-046 scsi: smartpqi: Enhance error messages scsi: smartpqi: Enhance controller offline notification scsi: smartpqi: Enhance shutdown notification scsi: smartpqi: Simplify lun_number assignment scsi: smartpqi: Rename pciinfo to pci_info scsi: smartpqi: Rename MACRO to clarify purpose scsi: smartpqi: Add abort handler ...
2023-09-09Merge tag 'driver-core-6.6-rc1-2' of ↵Linus Torvalds106-113/+113
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver symbol lookup fix from Greg KH: "Here is one last fixup for your tree for 6.6-rc1. It resolves a problem with the way that symbol_get was changed in the module tree merge in your tree to fix up the DVB drivers which rely on this old api to attach new devices. As the changelog comment says: In commit 9011e49d54dc ("modules: only allow symbol_get of EXPORT_SYMBOL_GPL modules") the use of symbol_get is properly restricted to GPL-only marked symbols. This interacts oddly with the DVB logic which only uses dvb_attach() to load the dvb driver which then uses symbol_get(). Fix this up by properly marking all of the dvb_attach attach symbols as EXPORT_SYMBOL_GPL(). This has been acked by Hans from the V4L driver side, Luis from the module side, Mauro on the media side, and Christoph said it was the correct solution, and was tested by the original reporter of the issue. It has passed 0-day testing, but has not been in linux-next due to it only being sent yesterday" * tag 'driver-core-6.6-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: media: dvb: symbol fixup for dvb_attach()
2023-09-09Merge tag 'dma-mapping-6.6-2023-09-09' of ↵Linus Torvalds4-13/+18
git://git.infradead.org/users/hch/dma-mapping Pull dma-mapping fixes from Christoph Hellwig: - move a dma-debug call that prints a message out from a lock that's causing problems with the lock order in serial drivers (Sergey Senozhatsky) - fix the CONFIG_DMA_NUMA_CMA Kconfig entry to have the right dependency and not default to y (Christoph Hellwig) - move an ifdef a bit to remove a __maybe_unused that seems to trip up some sensitivities (Christoph Hellwig) - revert a bogus check in the CMA allocator (Zhenhua Huang) * tag 'dma-mapping-6.6-2023-09-09' of git://git.infradead.org/users/hch/dma-mapping: Revert "dma-contiguous: check for memory region overlap" dma-pool: remove a __maybe_unused label in atomic_pool_expand dma-contiguous: fix the Kconfig entry for CONFIG_DMA_NUMA_CMA dma-debug: don't call __dma_entry_alloc_check_leak() under free_entries_lock
2023-09-09Merge tag 'pci-v6.6-fixes-1' of ↵Linus Torvalds3-2/+3
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci Pull PCI fixes from Bjorn Helgaas: - Add PCI_DYNAMIC_OF_NODES dependency on OF_IRQ to fix sparc64 build error (Lizhi Hou) - After coalescing host bridge resources, free any released resources to avoid a leak (Ross Lagerwall) - Revert a quirk that prevented NVIDIA T4 GPUs from using Secondary Bus Reset. The quirk worked around an issue that we now think is related to the Root Port, not the GPU (Bjorn Helgaas) * tag 'pci-v6.6-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: Revert "PCI: Mark NVIDIA T4 GPUs to avoid bus reset" PCI: Free released resource after coalescing PCI: Fix CONFIG_PCI_DYNAMIC_OF_NODES kconfig dependencies
2023-09-09Merge tag 'ntb-6.6' of https://github.com/jonmason/ntbLinus Torvalds4-25/+24
Pull NTB updates from Jon Mason: "Link toggling fixes and debugfs error path fixes" [ And for everybody like me who always have to remind themselves what the TLA of the day is, and what NTB stands for - it's a PCIe "Non-Transparent Bridge" thing - Linus ] * tag 'ntb-6.6' of https://github.com/jonmason/ntb: ntb: Check tx descriptors outstanding instead of head/tail for tx queue ntb: Fix calculation ntb_transport_tx_free_entry() ntb: Drop packets when qp link is down ntb: Clean up tx tail index on link down ntb: amd: Drop unnecessary error check for debugfs_create_dir NTB: ntb_tool: Switch to memdup_user_nul() helper dtivers: ntb: fix parameter check in perf_setup_dbgfs() ntb: Remove error checking for debugfs_create_dir()
2023-09-09spnego: add missing OID to oid registrySteve French1-0/+1
Add missing OID to the registry. Some servers and clients (including Windows) now request "NEGOEX - SPNEGEO Extended Negotiation Security") See https://datatracker.ietf.org/doc/html/draft-zhu-negoex-02 Reviewed-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
Powered by cgit, Gruvboxed by Blaster4385.