aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2019-01-10drm/fb-helper: Ignore the value of fb_var_screeninfo.pixclockIvan Mironov1-1/+6
Strict requirement of pixclock to be zero breaks support of SDL 1.2 which contains hardcoded table of supported video modes with non-zero pixclock values[1]. To better understand which pixclock values are considered valid and how driver should handle these values, I briefly examined few existing fbdev drivers and documentation in Documentation/fb/. And it looks like there are no strict rules on that and actual behaviour varies: * some drivers treat (pixclock == 0) as "use defaults" (uvesafb.c); * some treat (pixclock == 0) as invalid value which leads to -EINVAL (clps711x-fb.c); * some pass converted pixclock value to hardware (uvesafb.c); * some are trying to find nearest value from predefined table (vga16fb.c, video_gx.c). Given this, I believe that it should be safe to just ignore this value if changing is not supported. It seems that any portable fbdev application which was not written only for one specific device working under one specific kernel version should not rely on any particular behaviour of pixclock anyway. However, while enabling SDL1 applications to work out of the box when there is no /etc/fb.modes with valid settings, this change affects the video mode choosing logic in SDL. Depending on current screen resolution, contents of /etc/fb.modes and resolution requested by application, this may lead to user-visible difference (not always): image will be displayed in a right way, but it will be aligned to the left instead of center. There is no "right behaviour" here as well, as emulated fbdev, opposing to old fbdev drivers, simply ignores any requsts of video mode changes with resolutions smaller than current. The easiest way to reproduce this problem is to install sdl-sopwith[2], remove /etc/fb.modes file if it exists, and then try to run sopwith from console without X. At least in Fedora 29, sopwith may be simply installed from standard repositories. [1] SDL 1.2.15 source code, src/video/fbcon/SDL_fbvideo.c, vesa_timings [2] http://sdl-sopwith.sourceforge.net/ Signed-off-by: Ivan Mironov <[email protected]> Cc: [email protected] Fixes: 79e539453b34e ("DRM: i915: add mode setting support") Fixes: 771fe6b912fca ("drm/radeon: introduce kernel modesetting for radeon hardware") Fixes: 785b93ef8c309 ("drm/kms: move driver specific fb common code to helper functions (v2)") Signed-off-by: Daniel Vetter <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-01-10drm/fb-helper: Partially bring back workaround for bugs of SDL 1.2Ivan Mironov1-53/+73
SDL 1.2 sets all fields related to the pixel format to zero in some cases[1]. Prior to commit db05c48197759 ("drm: fb-helper: Reject all pixel format changing requests"), there was an unintentional workaround for this that existed for more than a decade. First in device-specific DRM drivers, then here in drm_fb_helper.c. Previous code containing this workaround just ignores pixel format fields from userspace code. Not a good thing either, as this way, driver may silently use pixel format different from what client actually requested, and this in turn will lead to displaying garbage on the screen. I think that returning EINVAL to userspace in this particular case is the right option, so I decided to left code from problematic commit untouched instead of just reverting it entirely. Here is the steps required to reproduce this problem exactly: 1) Compile fceux[2] with SDL 1.2.15 and without GTK or OpenGL support. SDL should be compiled with fbdev support (which is on by default). 2) Create /etc/fb.modes with following contents (values seems not used, and just required to trigger problematic code in SDL): mode "test" geometry 1 1 1 1 1 timings 1 1 1 1 1 1 1 endmode 3) Create ~/.fceux/fceux.cfg with following contents: SDL.Hotkeys.Quit = 27 SDL.DoubleBuffering = 1 4) Ensure that screen resolution is at least 1280x960 (e.g. append "video=Virtual-1:1280x960-32" to the kernel cmdline for qemu/QXL). 5) Try to run fceux on VT with some ROM file[3]: # ./fceux color_test.nes [1] SDL 1.2.15 source code, src/video/fbcon/SDL_fbvideo.c, FB_SetVideoMode() [2] http://www.fceux.com [3] Example ROM: https://github.com/bokuweb/rustynes/blob/master/roms/color_test.nes Reported-by: saahriktu <[email protected]> Suggested-by: saahriktu <[email protected]> Cc: [email protected] Fixes: db05c48197759 ("drm: fb-helper: Reject all pixel format changing requests") Signed-off-by: Ivan Mironov <[email protected]> [danvet: Delete misleading comment.] Signed-off-by: Daniel Vetter <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-01-09loop: drop caches if offset or block_size are changedJaegeuk Kim1-2/+33
If we don't drop caches used in old offset or block_size, we can get old data from new offset/block_size, which gives unexpected data to user. For example, Martijn found a loopback bug in the below scenario. 1) LOOP_SET_FD loads first two pages on loop file 2) LOOP_SET_STATUS64 changes the offset on the loop file 3) mount is failed due to the cached pages having wrong superblock Cc: Jens Axboe <[email protected]> Cc: [email protected] Reported-by: Martijn Coenen <[email protected]> Reviewed-by: Bart Van Assche <[email protected]> Signed-off-by: Jaegeuk Kim <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2019-01-09bpf: correctly set initial window on active Fast Open senderYuchung Cheng1-1/+1
The existing BPF TCP initial congestion window (TCP_BPF_IW) does not to work on (active) Fast Open sender. This is because it changes the (initial) window only if data_segs_out is zero -- but data_segs_out is also incremented on SYN-data. This patch fixes the issue by proerly accounting for SYN-data additionally. Fixes: fc7478103c84 ("bpf: Adds support for setting initial cwnd") Signed-off-by: Yuchung Cheng <[email protected]> Reviewed-by: Neal Cardwell <[email protected]> Acked-by: Lawrence Brakmo <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]>
2019-01-09tty/serial: Add RISC-V SBI earlycon supportAnup Patel3-0/+41
In RISC-V, the M-mode runtime firmware provide SBI calls for debug prints. This patch adds earlycon support using RISC-V SBI console calls. To enable it, just pass "earlycon=sbi" in kernel parameters. Signed-off-by: Anup Patel <[email protected]> Acked-by: Greg Kroah-Hartman <[email protected]> Reviewed-by: Palmer Dabbelt <[email protected]> Signed-off-by: Palmer Dabbelt <[email protected]>
2019-01-09block: fix kerneldoc comment for blk_attempt_plug_merge()Jonathan Corbet1-1/+0
Commit 5f0ed774ed29 ("block: sum requests in the plug structure") removed the request_count parameter from block_attempt_plug_merge(), but did not remove the associated kerneldoc comment, introducing this warning to the docs build: ./block/blk-core.c:685: warning: Excess function parameter 'request_count' description in 'blk_attempt_plug_merge' Remove the obsolete description and make things a little quieter. Signed-off-by: Jonathan Corbet <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2019-01-09netfilter: nft_flow_offload: Fix reverse route lookupwenxu1-2/+2
Using the following example: client 1.1.1.7 ---> 2.2.2.7 which dnat to 10.0.0.7 server The first reply packet (ie. syn+ack) uses an incorrect destination address for the reverse route lookup since it uses: daddr = ct->tuplehash[!dir].tuple.dst.u3.ip; which is 2.2.2.7 in the scenario that is described above, while this should be: daddr = ct->tuplehash[dir].tuple.src.u3.ip; that is 10.0.0.7. Signed-off-by: wenxu <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2019-01-09sunrpc: kernel BUG at kernel/cred.c:825!Santosh kumar pradhan1-0/+3
Init missing debug member magic with CRED_MAGIC. Signed-off-by: Santosh kumar pradhan <[email protected]> Reported-by: Dave Jones <[email protected]> Signed-off-by: Anna Schumaker <[email protected]>
2019-01-09MIPS: BCM47XX: Setup struct device for the SoCRafał Miłecki2-0/+32
So far we never had any device registered for the SoC. This resulted in some small issues that we kept ignoring like: 1) Not working GPIOLIB_IRQCHIP (gpiochip_irqchip_add_key() failing) 2) Lack of proper tree in the /sys/devices/ 3) mips_dma_alloc_coherent() silently handling empty coherent_dma_mask Kernel 4.19 came with a lot of DMA changes and caused a regression on bcm47xx. Starting with the commit f8c55dc6e828 ("MIPS: use generic dma noncoherent ops for simple noncoherent platforms") DMA coherent allocations just fail. Example: [ 1.114914] bgmac_bcma bcma0:2: Allocation of TX ring 0x200 failed [ 1.121215] bgmac_bcma bcma0:2: Unable to alloc memory for DMA [ 1.127626] bgmac_bcma: probe of bcma0:2 failed with error -12 [ 1.133838] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded The bgmac driver also triggers a WARNING: [ 0.959486] ------------[ cut here ]------------ [ 0.964387] WARNING: CPU: 0 PID: 1 at ./include/linux/dma-mapping.h:516 bgmac_enet_probe+0x1b4/0x5c4 [ 0.973751] Modules linked in: [ 0.976913] CPU: 0 PID: 1 Comm: swapper Not tainted 4.19.9 #0 [ 0.982750] Stack : 804a0000 804597c4 00000000 00000000 80458fd8 8381bc2c 838282d4 80481a47 [ 0.991367] 8042e3ec 00000001 804d38f0 00000204 83980000 00000065 8381bbe0 6f55b24f [ 0.999975] 00000000 00000000 80520000 00002018 00000000 00000075 00000007 00000000 [ 1.008583] 00000000 80480000 000ee811 00000000 00000000 00000000 80432c00 80248db8 [ 1.017196] 00000009 00000204 83980000 803ad7b0 00000000 801feeec 00000000 804d0000 [ 1.025804] ... [ 1.028325] Call Trace: [ 1.030875] [<8000aef8>] show_stack+0x58/0x100 [ 1.035513] [<8001f8b4>] __warn+0xe4/0x118 [ 1.039708] [<8001f9a4>] warn_slowpath_null+0x48/0x64 [ 1.044935] [<80248db8>] bgmac_enet_probe+0x1b4/0x5c4 [ 1.050101] [<802498e0>] bgmac_probe+0x558/0x590 [ 1.054906] [<80252fd0>] bcma_device_probe+0x38/0x70 [ 1.060017] [<8020e1e8>] really_probe+0x170/0x2e8 [ 1.064891] [<8020e714>] __driver_attach+0xa4/0xec [ 1.069784] [<8020c1e0>] bus_for_each_dev+0x58/0xb0 [ 1.074833] [<8020d590>] bus_add_driver+0xf8/0x218 [ 1.079731] [<8020ef24>] driver_register+0xcc/0x11c [ 1.084804] [<804b54cc>] bgmac_init+0x1c/0x44 [ 1.089258] [<8000121c>] do_one_initcall+0x7c/0x1a0 [ 1.094343] [<804a1d34>] kernel_init_freeable+0x150/0x218 [ 1.099886] [<803a082c>] kernel_init+0x10/0x104 [ 1.104583] [<80005878>] ret_from_kernel_thread+0x14/0x1c [ 1.110107] ---[ end trace f441c0d873d1fb5b ]--- This patch setups a "struct device" (and passes it to the bcma) which allows fixing all the mentioned problems. It'll also require a tiny bcma patch which will follow through the wireless tree & its maintainer. Fixes: f8c55dc6e828 ("MIPS: use generic dma noncoherent ops for simple noncoherent platforms") Signed-off-by: Rafał Miłecki <[email protected]> Signed-off-by: Paul Burton <[email protected]> Acked-by: Hauke Mehrtens <[email protected]> Cc: Christoph Hellwig <[email protected]> Cc: Linus Walleij <[email protected]> Cc: [email protected] Cc: Ralf Baechle <[email protected]> Cc: James Hogan <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] # v4.19+
2019-01-09MIPS: jazz: fix 64bit buildThomas Bogendoerfer1-2/+3
64bit JAZZ builds failed with linux-next/arch/mips/jazz/jazzdma.c: In function `vdma_init`: /linux-next/arch/mips/jazz/jazzdma.c:77:30: error: implicit declaration of function `KSEG1ADDR`; did you mean `CKSEG1ADDR`? [-Werror=implicit-function-declaration] pgtbl = (VDMA_PGTBL_ENTRY *)KSEG1ADDR(pgtbl); ^~~~~~~~~ CKSEG1ADDR /linux-next/arch/mips/jazz/jazzdma.c:77:10: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast] pgtbl = (VDMA_PGTBL_ENTRY *)KSEG1ADDR(pgtbl); ^ In file included from /linux-next/arch/mips/include/asm/barrier.h:11:0, from /linux-next/include/linux/compiler.h:248, from /linux-next/include/linux/kernel.h:10, from /linux-next/arch/mips/jazz/jazzdma.c:11: /linux-next/arch/mips/include/asm/addrspace.h:41:29: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast] #define _ACAST32_ (_ATYPE_)(_ATYPE32_) /* widen if necessary */ ^ /linux-next/arch/mips/include/asm/addrspace.h:53:25: note: in expansion of macro `_ACAST32_` #define CPHYSADDR(a) ((_ACAST32_(a)) & 0x1fffffff) ^~~~~~~~~ /linux-next/arch/mips/jazz/jazzdma.c:84:44: note: in expansion of macro `CPHYSADDR` r4030_write_reg32(JAZZ_R4030_TRSTBL_BASE, CPHYSADDR(pgtbl)); Using correct casts and CKSEG1ADDR when dealing with the pgtbl setup fixes this. Signed-off-by: Thomas Bogendoerfer <[email protected]> Signed-off-by: Paul Burton <[email protected]> Cc: Ralf Baechle <[email protected]> Cc: James Hogan <[email protected]> Cc: [email protected] Cc: [email protected]
2019-01-09drm/amdgpu: disable system memory page tables for nowChristian König1-3/+0
We hit a problem with IOMMU with that. Disable until we have time to debug further. Signed-off-by: Christian König <[email protected]> Reviewed-by: Michel Dänzer <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-01-09drm/amdgpu: set WRITE_BURST_LENGTH to 64B to workaround SDMA1 hangJim Qu1-1/+2
effect asics: VEGA10 and VEGA12 Signed-off-by: Jim Qu <[email protected]> Acked-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-01-09drm/amdgpu: fix CPDMA hang in PRT mode for VEGA20Tao Zhou1-5/+5
Fix CPDMA hang in PRT mode for both VEGA10 and VEGA20 Signed-off-by: Tao Zhou <[email protected]> Tested-by: Yukun.Li <[email protected]> Acked-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-01-09perf symbols: Add 'arch_cpu_idle' to the list of kernel idle symbolsArnaldo Carvalho de Melo1-0/+1
When testing 'perf top' on a armhf system (32-bit, Orange Pi Zero), I noticed that 'arch_cpu_idle' dominated, add it to the list of idle symbols, so that we can see what is that being done when not idle. Cc: Adrian Hunter <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Link: https://lkml.kernel.org/n/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2019-01-09nvme: don't initlialize ctrl->cntlid twiceAndrey Smirnov1-1/+0
ctrl->cntlid will already be initialized from id->cntlid for non-NVME_F_FABRICS controllers few lines below. For NVME_F_FABRICS controllers this field should already be initialized, otherwise the check if (ctrl->cntlid != le16_to_cpu(id->cntlid)) below will always be a no-op. Signed-off-by: Andrey Smirnov <[email protected]> Reviewed-by: Keith Busch <[email protected]> Reviewed-by: Sagi Grimberg <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]>
2019-01-09nvme: introduce NVME_QUIRK_IGNORE_DEV_SUBNQNJames Dingwall3-7/+16
If a device provides an NQN it is expected to be globally unique. Unfortunately some firmware revisions for Intel 760p/Pro 7600p devices did not satisfy this requirement. In these circumstances if a system has >1 affected device then only one device is enabled. If this quirk is enabled then the device supplied subnqn is ignored and we fallback to generating one as if the field was empty. In this case we also suppress the version check so we don't print a warning when the quirk is enabled. Reviewed-by: Keith Busch <[email protected]> Signed-off-by: James Dingwall <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]>
2019-01-09nvme: pad fake subsys NQN vid and ssvid with zerosKeith Busch1-1/+1
We need to preserve the leading zeros in the vid and ssvid when generating a unique NQN. Truncating these may lead to naming collisions. Signed-off-by: Keith Busch <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]>
2019-01-09nvme-multipath: zero out ANA log bufferHannes Reinecke1-0/+2
When nvme_init_identify() fails the ANA log buffer is deallocated but _not_ set to NULL. This can cause double free oops when this controller is deleted without ever being reconnected. Signed-off-by: Hannes Reinecke <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]>
2019-01-09nvme-fabrics: unset write/poll queues for discovery controllersSagi Grimberg1-0/+2
Even if user-space sent it to us, it got it wrong so lets help by disallowing it. Signed-off-by: Sagi Grimberg <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]>
2019-01-09nvme-tcp: don't ask if controller is fabricsSagi Grimberg1-9/+6
For sure we are a fabric driver. Signed-off-by: Sagi Grimberg <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]>
2019-01-09nvme-tcp: remove dead codeSagi Grimberg1-1/+0
We should never touch the opal device from the transport driver. Signed-off-by: Sagi Grimberg <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]>
2019-01-09nvme-pci: fix out of bounds access in nvme_cqe_pendingHongbo Yao1-1/+3
There is an out of bounds array access in nvme_cqe_peding(). When enable irq_thread for nvme interrupt, there is racing between the nvmeq->cq_head updating and reading. nvmeq->cq_head is updated in nvme_update_cq_head(), if nvmeq->cq_head equals nvmeq->q_depth and before its value set to zero, nvme_cqe_pending() uses its value as an array index, the index will be out of bounds. Signed-off-by: Hongbo Yao <[email protected]> [hch: slight coding style update] Signed-off-by: Christoph Hellwig <[email protected]>
2019-01-09nvme-pci: rerun irq setup on IO queue init errorsKeith Busch1-14/+36
If the driver is unable to create a subset of IO queues for any reason, the read/write and polled queue sets will not match the actual allocated hardware contexts. This leaves gaps in the CPU affinity mappings and causes the following kernel panic after blk_mq_map_queue_type() returns a NULL hctx. BUG: unable to handle kernel NULL pointer dereference at 0000000000000198 #PF error: [normal kernel read fault] PGD 0 P4D 0 Oops: 0000 [#1] SMP CPU: 64 PID: 1171 Comm: kworker/u259:1 Not tainted 4.20.0+ #241 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-2.fc27 04/01/2014 Workqueue: nvme-wq nvme_scan_work [nvme_core] RIP: 0010:blk_mq_init_allocated_queue+0x2d9/0x440 RSP: 0018:ffffb1bf0abc3cd0 EFLAGS: 00010286 RAX: 000000000000001f RBX: ffff8ea744cf0718 RCX: 0000000000000000 RDX: 0000000000000002 RSI: 000000000000007c RDI: ffffffff9109a820 RBP: ffff8ea7565f7008 R08: 000000000000001f R09: 000000000000003f R10: ffffb1bf0abc3c00 R11: 0000000000000000 R12: 000000000001d008 R13: ffff8ea7565f7008 R14: 000000000000003f R15: 0000000000000001 FS: 0000000000000000(0000) GS:ffff8ea757200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000198 CR3: 0000000013058000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: blk_mq_init_queue+0x35/0x60 nvme_validate_ns+0xc6/0x7c0 [nvme_core] ? nvme_identify_ctrl.isra.56+0x7e/0xc0 [nvme_core] nvme_scan_work+0xc8/0x340 [nvme_core] ? __wake_up_common+0x6d/0x120 ? try_to_wake_up+0x55/0x410 process_one_work+0x1e9/0x3d0 worker_thread+0x2d/0x3d0 ? process_one_work+0x3d0/0x3d0 kthread+0x111/0x130 ? kthread_park+0x90/0x90 ret_from_fork+0x1f/0x30 Modules linked in: nvme nvme_core serio_raw CR2: 0000000000000198 Fix by re-running the interrupt vector setup from scratch using a reduced count that may be successful until the created queues matches the irq affinity plus polling queue sets. Signed-off-by: Keith Busch <[email protected]> Reviewed-by: Sagi Grimberg <[email protected]> Reviewed-by: Ming Lei <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]>
2019-01-09nvme-pci: use the same attributes when freeing host_mem_desc_bufs.Liviu Dudau1-4/+6
When using HMB the PCIe host driver allocates host_mem_desc_bufs using dma_alloc_attrs() but frees them using dma_free_coherent(). Use the correct dma_free_attrs() function to free the buffers. Signed-off-by: Liviu Dudau <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]>
2019-01-09nvme-pci: fix the wrong setting of nr_mapsJianchao Wang1-1/+0
We only set the nr_maps to 3 if poll queues are supported. Signed-off-by: Jianchao Wang <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]>
2019-01-09Merge tag 'csky-for-linus-5.0-rc1' of git://github.com/c-sky/csky-linuxLinus Torvalds45-76/+148
Pull arch/csky bug fixes from Guo Ren: "Here are some fixup patches for 5.0-rc1: - fix compile error with pte_alloc - fix handle_irq_perbit break irq flow - fix CACHEV1 store instruction fast retire - fix module relocation error with 807 & 860 - add csky kernel features to documentation" * tag 'csky-for-linus-5.0-rc1' of git://github.com/c-sky/csky-linux: irqchip/csky: fixup handle_irq_perbit break irq csky: fixup compile error with pte_alloc csky: fixup CACHEV1 store instruction fast retire csky: fixup relocation error with 807 & 860 Documentation/features: Add csky kernel features
2019-01-09block: doc: add slice_idle_us to bfq documentationJohn Pittman1-0/+7
Of the tunables available for the bfq I/O scheduler, the only one missing from the documentation in 'Documentation/block/bfq-iosched.txt' is slice_idle_us. Add this tunable to the documentation and a short explanation of its purpose. Acked-by: Paolo Valente <[email protected]> Signed-off-by: John Pittman <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2019-01-09Btrfs: fix deadlock when using free space tree due to block group creationFilipe Manana1-7/+9
When modifying the free space tree we can end up COWing one of its extent buffers which in turn might result in allocating a new chunk, which in turn can result in flushing (finish creation) of pending block groups. If that happens we can deadlock because creating a pending block group needs to update the free space tree, and if any of the updates tries to modify the same extent buffer that we are COWing, we end up in a deadlock since we try to write lock twice the same extent buffer. So fix this by skipping pending block group creation if we are COWing an extent buffer from the free space tree. This is a case missed by commit 5ce555578e091 ("Btrfs: fix deadlock when writing out free space caches"). Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=202173 Fixes: 5ce555578e091 ("Btrfs: fix deadlock when writing out free space caches") CC: [email protected] # 4.18+ Signed-off-by: Filipe Manana <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]>
2019-01-09Btrfs: fix race between reflink/dedupe and relocationFilipe Manana1-6/+28
The recent rework that makes btrfs' remap_file_range operation use the generic helper generic_remap_file_range_prep() introduced a race between relocation and reflinking (for both cloning and deduplication) the file extents between the source and destination inodes. This happens because we no longer lock the source range anymore, and we do not lock it anymore because we wait for direct IO writes and writeback to complete early on the code path right after locking the inodes, which guarantees no other file operations interfere with the reflinking. However there is one exception which is relocation, since it replaces the byte number of file extents items in the fs tree after locking the range the file extent items represent. This is a problem because after finding each file extent to clone in the fs tree, the reflink process copies the file extent item into a local buffer, releases the search path, inserts new file extent items in the destination range and then increments the reference count for the extent mentioned in the file extent item that it previously copied to the buffer. If right after copying the file extent item into the buffer and releasing the path the relocation process updates the file extent item to point to the new extent, the reflink process ends up creating a delayed reference to increment the reference count of the old extent, for which the relocation process already created a delayed reference to drop it. This results in failure to run delayed references because we will attempt to increment the count of a reference that was already dropped. This is illustrated by the following diagram: CPU 1 CPU 2 relocation is running btrfs_clone_files() btrfs_clone() --> finds extent item in source range point to extent at bytenr X --> copies it into a local buffer --> releases path replace_file_extents() --> successfully locks the range represented by the file extent item --> replaces disk_bytenr field in the file extent item with some other value Y --> creates delayed reference to increment reference count for extent at bytenr Y --> creates delayed reference to drop the extent at bytenr X --> starts transaction --> creates delayed reference to increment extent at bytenr X <delayed references are run, due to a transaction commit for example, and the transaction is aborted with -EIO because we attempt to increment reference count for the extent at bytenr X after we freed it> When this race is hit the running transaction ends up getting aborted with an -EIO error and a trace like the following is produced: [ 4382.553858] WARNING: CPU: 2 PID: 3648 at fs/btrfs/extent-tree.c:1552 lookup_inline_extent_backref+0x4f4/0x650 [btrfs] (...) [ 4382.556293] CPU: 2 PID: 3648 Comm: btrfs Tainted: G W 4.20.0-rc6-btrfs-next-41 #1 [ 4382.556294] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.2-0-gf9626ccb91-prebuilt.qemu-project.org 04/01/2014 [ 4382.556308] RIP: 0010:lookup_inline_extent_backref+0x4f4/0x650 [btrfs] (...) [ 4382.556310] RSP: 0018:ffffac784408f738 EFLAGS: 00010202 [ 4382.556311] RAX: 0000000000000001 RBX: ffff8980673c3a48 RCX: 0000000000000001 [ 4382.556312] RDX: 0000000000000008 RSI: 0000000000000000 RDI: 0000000000000000 [ 4382.556312] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000001 [ 4382.556313] R10: 0000000000000001 R11: ffff897f40000000 R12: 0000000000001000 [ 4382.556313] R13: 00000000c224f000 R14: ffff89805de9bd40 R15: ffff8980453f4548 [ 4382.556315] FS: 00007f5e759178c0(0000) GS:ffff89807b300000(0000) knlGS:0000000000000000 [ 4382.563130] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 4382.563562] CR2: 00007f2e9789fcbc CR3: 0000000120512001 CR4: 00000000003606e0 [ 4382.564005] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 4382.564451] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 4382.564887] Call Trace: [ 4382.565343] insert_inline_extent_backref+0x55/0xe0 [btrfs] [ 4382.565796] __btrfs_inc_extent_ref.isra.60+0x88/0x260 [btrfs] [ 4382.566249] ? __btrfs_run_delayed_refs+0x93/0x1650 [btrfs] [ 4382.566702] __btrfs_run_delayed_refs+0xa22/0x1650 [btrfs] [ 4382.567162] btrfs_run_delayed_refs+0x7e/0x1d0 [btrfs] [ 4382.567623] btrfs_commit_transaction+0x50/0x9c0 [btrfs] [ 4382.568112] ? _raw_spin_unlock+0x24/0x30 [ 4382.568557] ? block_rsv_release_bytes+0x14e/0x410 [btrfs] [ 4382.569006] create_subvol+0x3c8/0x830 [btrfs] [ 4382.569461] ? btrfs_mksubvol+0x317/0x600 [btrfs] [ 4382.569906] btrfs_mksubvol+0x317/0x600 [btrfs] [ 4382.570383] ? rcu_sync_lockdep_assert+0xe/0x60 [ 4382.570822] ? __sb_start_write+0xd4/0x1c0 [ 4382.571262] ? mnt_want_write_file+0x24/0x50 [ 4382.571712] btrfs_ioctl_snap_create_transid+0x117/0x1a0 [btrfs] [ 4382.572155] ? _copy_from_user+0x66/0x90 [ 4382.572602] btrfs_ioctl_snap_create+0x66/0x80 [btrfs] [ 4382.573052] btrfs_ioctl+0x7c1/0x30e0 [btrfs] [ 4382.573502] ? mem_cgroup_commit_charge+0x8b/0x570 [ 4382.573946] ? do_raw_spin_unlock+0x49/0xc0 [ 4382.574379] ? _raw_spin_unlock+0x24/0x30 [ 4382.574803] ? __handle_mm_fault+0xf29/0x12d0 [ 4382.575215] ? do_vfs_ioctl+0xa2/0x6f0 [ 4382.575622] ? btrfs_ioctl_get_supported_features+0x30/0x30 [btrfs] [ 4382.576020] do_vfs_ioctl+0xa2/0x6f0 [ 4382.576405] ksys_ioctl+0x70/0x80 [ 4382.576776] __x64_sys_ioctl+0x16/0x20 [ 4382.577137] do_syscall_64+0x60/0x1b0 [ 4382.577488] entry_SYSCALL_64_after_hwframe+0x49/0xbe (...) [ 4382.578837] RSP: 002b:00007ffe04bf64c8 EFLAGS: 00000202 ORIG_RAX: 0000000000000010 [ 4382.579174] RAX: ffffffffffffffda RBX: 00005564136f3050 RCX: 00007f5e74724dd7 [ 4382.579505] RDX: 00007ffe04bf64d0 RSI: 000000005000940e RDI: 0000000000000003 [ 4382.579848] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000044 [ 4382.580164] R10: 0000000000000541 R11: 0000000000000202 R12: 00005564136f3010 [ 4382.580477] R13: 0000000000000003 R14: 00005564136f3035 R15: 00005564136f3050 [ 4382.580792] irq event stamp: 0 [ 4382.581106] hardirqs last enabled at (0): [<0000000000000000>] (null) [ 4382.581441] hardirqs last disabled at (0): [<ffffffff8d085842>] copy_process.part.32+0x6e2/0x2320 [ 4382.581772] softirqs last enabled at (0): [<ffffffff8d085842>] copy_process.part.32+0x6e2/0x2320 [ 4382.582095] softirqs last disabled at (0): [<0000000000000000>] (null) [ 4382.582413] ---[ end trace d3c188e3e9367382 ]--- [ 4382.623855] BTRFS: error (device sdc) in btrfs_run_delayed_refs:2981: errno=-5 IO failure [ 4382.624295] BTRFS info (device sdc): forced readonly Fix this by locking the source range before searching for the file extent items in the fs tree, since the relocation process will try to lock the range a file extent item represents before updating it with the new extent location. Fixes: 34a28e3d7753 ("Btrfs: use generic_remap_file_range_prep() for cloning and deduplication") Signed-off-by: Filipe Manana <[email protected]> Signed-off-by: David Sterba <[email protected]>
2019-01-09Btrfs: fix race between cloning range ending at eof and writebackFilipe Manana1-0/+15
The recent rework that makes btrfs' remap_file_range operation use the generic helper generic_remap_file_range_prep() introduced a race between writeback and cloning a range that covers the eof extent of the source file into a destination offset that is greater then the same file's size. This happens because we now wait for writeback to complete before doing the truncation of the eof block, while previously we did the truncation and then waited for writeback to complete. This leads to a race between writeback of the truncated block and cloning the file extents in the source range, because we copy each file extent item we find in the fs root into a buffer, then release the path and then increment the reference count for the extent referred in that file extent item we copied, which can no longer exist if writeback of the truncated eof block completes after we copied the file extent item into the buffer and before we incremented the reference count. This is illustrated by the following diagram: CPU 1 CPU 2 btrfs_clone_files() btrfs_cont_expand() btrfs_truncate_block() --> zeroes part of the page containg eof, marking it for delalloc btrfs_clone() --> finds extent item covering eof, points to extent at bytenr X --> copies it into a local buffer --> releases path writeback starts btrfs_finish_ordered_io() insert_reserved_file_extent() __btrfs_drop_extents() --> creates delayed reference to drop the extent at bytenr X --> starts transaction --> creates delayed reference to increment extent at bytenr X <delayed references are run, due to a transaction commit for example, and the transaction is aborted with -EIO because we attempt to increment reference count for the extent at bytenr X after we freed it> When this race is hit the running transaction ends up getting aborted with an -EIO error and a trace like the following is produced: [ 4382.553858] WARNING: CPU: 2 PID: 3648 at fs/btrfs/extent-tree.c:1552 lookup_inline_extent_backref+0x4f4/0x650 [btrfs] (...) [ 4382.556293] CPU: 2 PID: 3648 Comm: btrfs Tainted: G W 4.20.0-rc6-btrfs-next-41 #1 [ 4382.556294] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.2-0-gf9626ccb91-prebuilt.qemu-project.org 04/01/2014 [ 4382.556308] RIP: 0010:lookup_inline_extent_backref+0x4f4/0x650 [btrfs] (...) [ 4382.556310] RSP: 0018:ffffac784408f738 EFLAGS: 00010202 [ 4382.556311] RAX: 0000000000000001 RBX: ffff8980673c3a48 RCX: 0000000000000001 [ 4382.556312] RDX: 0000000000000008 RSI: 0000000000000000 RDI: 0000000000000000 [ 4382.556312] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000001 [ 4382.556313] R10: 0000000000000001 R11: ffff897f40000000 R12: 0000000000001000 [ 4382.556313] R13: 00000000c224f000 R14: ffff89805de9bd40 R15: ffff8980453f4548 [ 4382.556315] FS: 00007f5e759178c0(0000) GS:ffff89807b300000(0000) knlGS:0000000000000000 [ 4382.563130] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 4382.563562] CR2: 00007f2e9789fcbc CR3: 0000000120512001 CR4: 00000000003606e0 [ 4382.564005] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 4382.564451] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 4382.564887] Call Trace: [ 4382.565343] insert_inline_extent_backref+0x55/0xe0 [btrfs] [ 4382.565796] __btrfs_inc_extent_ref.isra.60+0x88/0x260 [btrfs] [ 4382.566249] ? __btrfs_run_delayed_refs+0x93/0x1650 [btrfs] [ 4382.566702] __btrfs_run_delayed_refs+0xa22/0x1650 [btrfs] [ 4382.567162] btrfs_run_delayed_refs+0x7e/0x1d0 [btrfs] [ 4382.567623] btrfs_commit_transaction+0x50/0x9c0 [btrfs] [ 4382.568112] ? _raw_spin_unlock+0x24/0x30 [ 4382.568557] ? block_rsv_release_bytes+0x14e/0x410 [btrfs] [ 4382.569006] create_subvol+0x3c8/0x830 [btrfs] [ 4382.569461] ? btrfs_mksubvol+0x317/0x600 [btrfs] [ 4382.569906] btrfs_mksubvol+0x317/0x600 [btrfs] [ 4382.570383] ? rcu_sync_lockdep_assert+0xe/0x60 [ 4382.570822] ? __sb_start_write+0xd4/0x1c0 [ 4382.571262] ? mnt_want_write_file+0x24/0x50 [ 4382.571712] btrfs_ioctl_snap_create_transid+0x117/0x1a0 [btrfs] [ 4382.572155] ? _copy_from_user+0x66/0x90 [ 4382.572602] btrfs_ioctl_snap_create+0x66/0x80 [btrfs] [ 4382.573052] btrfs_ioctl+0x7c1/0x30e0 [btrfs] [ 4382.573502] ? mem_cgroup_commit_charge+0x8b/0x570 [ 4382.573946] ? do_raw_spin_unlock+0x49/0xc0 [ 4382.574379] ? _raw_spin_unlock+0x24/0x30 [ 4382.574803] ? __handle_mm_fault+0xf29/0x12d0 [ 4382.575215] ? do_vfs_ioctl+0xa2/0x6f0 [ 4382.575622] ? btrfs_ioctl_get_supported_features+0x30/0x30 [btrfs] [ 4382.576020] do_vfs_ioctl+0xa2/0x6f0 [ 4382.576405] ksys_ioctl+0x70/0x80 [ 4382.576776] __x64_sys_ioctl+0x16/0x20 [ 4382.577137] do_syscall_64+0x60/0x1b0 [ 4382.577488] entry_SYSCALL_64_after_hwframe+0x49/0xbe (...) [ 4382.578837] RSP: 002b:00007ffe04bf64c8 EFLAGS: 00000202 ORIG_RAX: 0000000000000010 [ 4382.579174] RAX: ffffffffffffffda RBX: 00005564136f3050 RCX: 00007f5e74724dd7 [ 4382.579505] RDX: 00007ffe04bf64d0 RSI: 000000005000940e RDI: 0000000000000003 [ 4382.579848] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000044 [ 4382.580164] R10: 0000000000000541 R11: 0000000000000202 R12: 00005564136f3010 [ 4382.580477] R13: 0000000000000003 R14: 00005564136f3035 R15: 00005564136f3050 [ 4382.580792] irq event stamp: 0 [ 4382.581106] hardirqs last enabled at (0): [<0000000000000000>] (null) [ 4382.581441] hardirqs last disabled at (0): [<ffffffff8d085842>] copy_process.part.32+0x6e2/0x2320 [ 4382.581772] softirqs last enabled at (0): [<ffffffff8d085842>] copy_process.part.32+0x6e2/0x2320 [ 4382.582095] softirqs last disabled at (0): [<0000000000000000>] (null) [ 4382.582413] ---[ end trace d3c188e3e9367382 ]--- [ 4382.623855] BTRFS: error (device sdc) in btrfs_run_delayed_refs:2981: errno=-5 IO failure [ 4382.624295] BTRFS info (device sdc): forced readonly Fix this by waiting for writeback to complete after truncating the eof block. Fixes: 34a28e3d7753 ("Btrfs: use generic_remap_file_range_prep() for cloning and deduplication") Signed-off-by: Filipe Manana <[email protected]> Signed-off-by: David Sterba <[email protected]>
2019-01-09tools include uapi: Sync linux/if_link.h copy with the kernel sourcesArnaldo Carvalho de Melo1-0/+19
To pick the changes from: a428afe82f98 ("net: bridge: add support for user-controlled bool options") a025fb5f49ad ("geneve: Allow configuration of DF behaviour") b4d3069783bc ("vxlan: Allow configuration of DF behaviour") Silencing this tools/ build warning: Warning: Kernel ABI header at 'tools/include/uapi/linux/if_link.h' differs from latest version at 'include/uapi/linux/if_link.h' Cc: Adrian Hunter <[email protected]> Cc: David S. Miller <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Nikolay Aleksandrov <[email protected]> Cc: Stefano Brivio <[email protected]> Link: https://lkml.kernel.org/n/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2019-01-09cpufreq: scmi: Fix frequency invariance in slow pathQuentin Perret1-2/+2
The scmi-cpufreq driver calls the arch_set_freq_scale() callback on frequency changes to provide scale-invariant load-tracking signals to the scheduler. However, in the slow path, it does so while specifying the current and max frequencies in different units, hence resulting in a broken freq_scale factor. Fix this by passing all frequencies in KHz, as stored in the CPUFreq frequency table. Fixes: 99d6bdf33877 (cpufreq: add support for CPU DVFS based on SCMI message protocol) Signed-off-by: Quentin Perret <[email protected]> Acked-by: Viresh Kumar <[email protected]> Acked-by: Sudeep Holla <[email protected]> Cc: 4.17+ <[email protected]> # v4.17+ Signed-off-by: Rafael J. Wysocki <[email protected]>
2019-01-09doc: trace: fix reference to cpuidle documentation fileOtto Sabart1-1/+1
Old cpuidle/sysfs.txt file was replaced in aa5eee355b46. So, refer to an updated file. Fixes: aa5eee355b46 (Documentation: admin-guide: PM: Add cpuidle document) Signed-off-by: Otto Sabart <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]>
2019-01-09include/linux/compiler*.h: fix OPTIMIZER_HIDE_VARMichael S. Tsirkin4-11/+6
Since commit 815f0ddb346c ("include/linux/compiler*.h: make compiler-*.h mutually exclusive") clang no longer reuses the OPTIMIZER_HIDE_VAR macro from compiler-gcc - instead it gets the version in include/linux/compiler.h. Unfortunately that version doesn't actually prevent compiler from optimizing out the variable. Fix up by moving the macro out from compiler-gcc.h to compiler.h. Compilers without incline asm support will keep working since it's protected by an ifdef. Also fix up comments to match reality since we are no longer overriding any macros. Build-tested with gcc and clang. Fixes: 815f0ddb346c ("include/linux/compiler*.h: make compiler-*.h mutually exclusive") Cc: Eli Friedman <[email protected]> Cc: Joe Perches <[email protected]> Cc: Linus Torvalds <[email protected]> Reviewed-by: Nick Desaulniers <[email protected]> Signed-off-by: Michael S. Tsirkin <[email protected]> Signed-off-by: Miguel Ojeda <[email protected]>
2019-01-09drm/bridge: tc358767: use DP connector if no panel setTomi Valkeinen1-1/+2
tc358767 driver sets the connector type always to eDP. This patch sets the type to DP if there is no panel defined, which implies that there's a DP connector on the board. Signed-off-by: Tomi Valkeinen <[email protected]> Reviewed-by: Andrzej Hajda <[email protected]> Signed-off-by: Andrzej Hajda <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-01-09drm/bridge: tc358767: fix output H/V syncsTomi Valkeinen1-1/+5
The H and V syncs of the DP output are always set to active high. This patch fixes the syncs by configuring them according to the videomode. Signed-off-by: Tomi Valkeinen <[email protected]> Reviewed-by: Andrzej Hajda <[email protected]> Signed-off-by: Andrzej Hajda <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-01-09drm/bridge: tc358767: reject modes which require too much BWTomi Valkeinen1-0/+10
The current driver accepts any videomode with pclk < 154MHz. This is not correct, as with 1 lane and/or 1.62Mbps speed not all videomodes can be supported. Add code to reject modes that require more bandwidth that is available. Signed-off-by: Tomi Valkeinen <[email protected]> Reviewed-by: Andrzej Hajda <[email protected]> Signed-off-by: Andrzej Hajda <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-01-09drm/bridge: tc358767: fix initial DP0/1_SRCCTRL valueTomi Valkeinen1-6/+5
Initially DP0_SRCCTRL is set to a static value which includes DP0_SRCCTRL_LANES_2 and DP0_SRCCTRL_BW27, even when only 1 lane of 1.62Gbps speed is used. DP1_SRCCTRL is configured to a magic number. This patch changes the configuration as follows: Configure DP0_SRCCTRL by using tc_srcctrl() which provides the correct value. DP1_SRCCTRL needs two bits to be set to the same value as DP0_SRCCTRL: SSCG and BW27. All other bits can be zero. Signed-off-by: Tomi Valkeinen <[email protected]> Reviewed-by: Andrzej Hajda <[email protected]> Signed-off-by: Andrzej Hajda <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-01-09drm/bridge: tc358767: fix single lane configurationTomi Valkeinen1-2/+8
PHY_2LANE bit is always set in DP_PHY_CTRL, breaking 1 lane use. Set PHY_2LANE only when 2 lanes are used. Signed-off-by: Tomi Valkeinen <[email protected]> Reviewed-by: Andrzej Hajda <[email protected]> Signed-off-by: Andrzej Hajda <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-01-09drm/bridge: tc358767: add defines for DP1_SRCCTRL & PHY_2LANETomi Valkeinen1-3/+7
DP1_SRCCTRL register and PHY_2LANE field did not have matching defines. Add these. Signed-off-by: Tomi Valkeinen <[email protected]> Reviewed-by: Andrzej Hajda <[email protected]> Signed-off-by: Andrzej Hajda <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-01-09drm/bridge: tc358767: add bus flagsTomi Valkeinen1-0/+4
tc358767 driver does not set DRM bus_flags, even if it does configures the polarity settings into its registers. This means that the DPI source can't configure the polarities correctly. Add sync flags accordingly. Signed-off-by: Tomi Valkeinen <[email protected]> Reviewed-by: Andrzej Hajda <[email protected]> Signed-off-by: Andrzej Hajda <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-01-09x86, modpost: Replace last remnants of RETPOLINE with CONFIG_RETPOLINEWANG Chao4-4/+4
Commit 4cd24de3a098 ("x86/retpoline: Make CONFIG_RETPOLINE depend on compiler support") replaced the RETPOLINE define with CONFIG_RETPOLINE checks. Remove the remaining pieces. [ bp: Massage commit message. ] Fixes: 4cd24de3a098 ("x86/retpoline: Make CONFIG_RETPOLINE depend on compiler support") Signed-off-by: WANG Chao <[email protected]> Signed-off-by: Borislav Petkov <[email protected]> Reviewed-by: Zhenzhong Duan <[email protected]> Reviewed-by: Masahiro Yamada <[email protected]> Cc: "H. Peter Anvin" <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Andrew Morton <[email protected]> Cc: Andy Lutomirski <[email protected]> Cc: Arnd Bergmann <[email protected]> Cc: Daniel Borkmann <[email protected]> Cc: David Woodhouse <[email protected]> Cc: Geert Uytterhoeven <[email protected]> Cc: Jessica Yu <[email protected]> Cc: Jiri Kosina <[email protected]> Cc: Kees Cook <[email protected]> Cc: Konrad Rzeszutek Wilk <[email protected]> Cc: Luc Van Oostenryck <[email protected]> Cc: Michal Marek <[email protected]> Cc: Miguel Ojeda <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Tim Chen <[email protected]> Cc: Vasily Gorbik <[email protected]> Cc: [email protected] Cc: [email protected] Cc: stable <[email protected]> Cc: x86-ml <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2019-01-09x86/cache: Rename config option to CONFIG_X86_RESCTRLBorislav Petkov6-8/+8
CONFIG_RESCTRL is too generic. The final goal is to have a generic option called like this which is selected by the arch-specific ones CONFIG_X86_RESCTRL and CONFIG_ARM64_RESCTRL. The generic one will cover the resctrl filesystem and other generic and shared bits of functionality. Signed-off-by: Borislav Petkov <[email protected]> Suggested-by: Ingo Molnar <[email protected]> Requested-by: Linus Torvalds <[email protected]> Cc: Babu Moger <[email protected]> Cc: Fenghua Yu <[email protected]> Cc: James Morse <[email protected]> Cc: Reinette Chatre <[email protected]> Cc: Tony Luck <[email protected]> Cc: [email protected] Link: http://lkml.kernel.org/r/[email protected]
2019-01-09ALSA: hda/realtek - Disable headset Mic VREF for headset mode of ALC225Kailang Yang1-1/+15
Disable Headset Mic VREF for headset mode of ALC225. This will be controlled by coef bits of headset mode functions. [ Fixed a compile warning and code simplification -- tiwai ] Signed-off-by: Kailang Yang <[email protected]> Cc: <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2019-01-09ALSA: hda/realtek - Add unplug function into unplug state of Headset Mode ↵Kailang Yang1-0/+1
for ALC225 Forgot to add unplug function to unplug state of headset mode for ALC225. Signed-off-by: Kailang Yang <[email protected]> Cc: <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2019-01-09Merge tag 'perf-core-for-mingo-5.0-20190108' of ↵Ingo Molnar21-250/+238
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/core fixes and improvements from Arnaldo Carvalho de Melo: perf top: Arnaldo Carvalho de Melo: - Lift restriction on using callchains without "sym" in --sort perf trace: Arnaldo Carvalho de Melo: - Fix ')' placement in "interrupted" syscall lines. - Fix alignment for [continued] lines. perf tests: Florian Fainelli: - Add a test for the ARM 32-bit [vectors] page. tools lib traceevent: Tzvetomir Stoyanov: - Introduce new libtracevent API: tep_override_comm(). - Initialize host_bigendian at tep_handle allocation. - More namespacing changes. - Remove superfluous APIs. tools headers uapi: Arnaldo Carvalho de Melo: . Update linux/{fs,vhost}.h, grab a copy o linux/mount.h, where the MS_ mount flags were moved. Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Ingo Molnar <[email protected]>
2019-01-08libnvdimm/dimm: Fix security capability detection for non-Intel NVDIMMsDan Williams1-0/+1
Kees reports a crash with the following signature... RIP: 0010:nvdimm_visible+0x79/0x80 [..] Call Trace: internal_create_group+0xf4/0x380 sysfs_create_groups+0x46/0xb0 device_add+0x331/0x680 nd_async_device_register+0x15/0x60 async_run_entry_fn+0x38/0x100 ...when starting a QEMU environment with "label-less" DIMM. Without labels QEMU does not publish any DSM methods. Without defined methods the NVDIMM_FAMILY type is not established and the nfit driver will skip registering security operations. In that case the security state should be initialized to a negative value in __nvdimm_create() and nvdimm_visible() should skip interrogating the specific ops. However, since 'enum nvdimm_security_state' was only defined to contain positive values the "if (nvdimm->sec.state < 0)" check always fails. Define a negative error state to allow negative state values to be handled as expected. Fixes: f2989396553a ("acpi/nfit, libnvdimm: Introduce nvdimm_security_ops") Reviewed-by: Dave Jiang <[email protected]> Reported-by: Kees Cook <[email protected]> Tested-by: Kees Cook <[email protected]> Signed-off-by: Dan Williams <[email protected]>
2019-01-08nfit: Mark some functions as __maybe_unusedNathan Chancellor1-4/+4
On arm64 little endian allyesconfig: drivers/acpi/nfit/intel.c:149:12: warning: unused function 'intel_security_unlock' [-Wunused-function] static int intel_security_unlock(struct nvdimm *nvdimm, ^ drivers/acpi/nfit/intel.c:230:12: warning: unused function 'intel_security_erase' [-Wunused-function] static int intel_security_erase(struct nvdimm *nvdimm, ^ drivers/acpi/nfit/intel.c:279:12: warning: unused function 'intel_security_query_overwrite' [-Wunused-function] static int intel_security_query_overwrite(struct nvdimm *nvdimm) ^ drivers/acpi/nfit/intel.c:316:12: warning: unused function 'intel_security_overwrite' [-Wunused-function] static int intel_security_overwrite(struct nvdimm *nvdimm, ^ 4 warnings generated. Mark these functions as __maybe_unused because they are only used when CONFIG_X86 is set. Fixes: 4c6926a23b76 ("acpi/nfit, libnvdimm: Add unlock of nvdimm support for Intel DIMMs") Suggested-by: Dan Williams <[email protected]> Signed-off-by: Nathan Chancellor <[email protected]> Signed-off-by: Dan Williams <[email protected]>
2019-01-09drm/i915/gvt: Fix workload request allocation before request addZhenyu Wang2-22/+43
In commit 6bb2a2af8b1b ("drm/i915/gvt: Fix crash after request->hw_context change"), forgot to handle workload scan path in ELSP handler case which was to optimize scanning earlier instead of in gvt submission thread, so request alloc and add was splitting then which is against right process. This trys to do a partial revert of that commit which still has workload request alloc helper and make sure shadow state population is handled after request alloc for target state buffer. v3: Fix missed workload status setting in request alloc error path v2: Fix dispatch workload err path that should add request after alloc anyway. Fixes: 6bb2a2af8b1b ("drm/i915/gvt: Fix crash after request->hw_context change") Cc: Bin Yang <[email protected]> Cc: Chris Wilson <[email protected]> Tested-by: Bin Yang <[email protected]> Reviewed-by: Xiaolin Zhang <[email protected]> Signed-off-by: Zhenyu Wang <[email protected]>
2019-01-08block: clarify documentation for blk_{start|finish}_plugJeff Moyer1-0/+19
There was some confusion about what these functions did. Make it clear that this is a hint for upper layers to pass to the block layer, and that it does not guarantee that I/O will not be submitted between a start and finish plug. Reported-by: "Darrick J. Wong" <[email protected]> Reviewed-by: Darrick J. Wong <[email protected]> Reviewed-by: Ming Lei <[email protected]> Signed-off-by: Jeff Moyer <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.