| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Add linux-next info to MAINTAINERS for ease of finding this data.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Randy Dunlap <[email protected]>
Acked-by: Stephen Rothwell <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Add my old mail address and update my name.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Markus Schneider-Pargmann <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
nr_to_write is a count of pages, so we need to decrease it by the number
of pages in the folio we just wrote, not by 1. Most callers specify
either LONG_MAX or 1, so are unaffected, but writeback_sb_inodes() might
end up writing 512x as many pages as it asked for.
Dave added:
: XFS is the only filesystem this would affect, right? AFAIA, nothing
: else enables large folios and uses writeback through
: write_cache_pages() at this point...
:
: In which case, I'd be surprised if much difference, if any, gets
: noticed by anyone.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 793917d997df ("mm/readahead: Add large folio readahead")
Signed-off-by: Matthew Wilcox (Oracle) <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Cc: Jan Kara <[email protected]>
Cc: Dave Chinner <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Commit c145e0b47c77 ("mm: streamline COW logic in do_swap_page()") moved
the call to swap_free() before the call to set_pte_at(), which meant that
the MTE tags could end up being freed before set_pte_at() had a chance to
restore them. Fix it by adding a call to the arch_swap_restore() hook
before the call to swap_free().
Link: https://lkml.kernel.org/r/[email protected]
Link: https://linux-review.googlesource.com/id/I6470efa669e8bd2f841049b8c61020c510678965
Fixes: c145e0b47c77 ("mm: streamline COW logic in do_swap_page()")
Signed-off-by: Peter Collingbourne <[email protected]>
Reported-by: Qun-wei Lin <[email protected]>
Closes: https://lore.kernel.org/all/[email protected]/
Acked-by: David Hildenbrand <[email protected]>
Acked-by: "Huang, Ying" <[email protected]>
Reviewed-by: Steven Price <[email protected]>
Acked-by: Catalin Marinas <[email protected]>
Cc: <[email protected]> [6.1+]
Signed-off-by: Andrew Morton <[email protected]>
|
|
Migration replaces the page in the mapping before copying the contents and
the flags over from the old page, so check that the page in the page cache
is really up to date before using it. Without this, stressing squashfs
reads with parallel compaction sometimes results in squashfs reporting
data corruption.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: e994f5b677ee ("squashfs: cache partial compressed blocks")
Signed-off-by: Vincent Whitchurch <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Phillip Lougher <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
The following crash happens for me when running the -mm selftests (below).
Specifically, it happens while running the uffd-stress subtests:
kernel BUG at mm/hugetlb.c:7249!
invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
CPU: 0 PID: 3238 Comm: uffd-stress Not tainted 6.4.0-hubbard-github+ #109
Hardware name: ASUS X299-A/PRIME X299-A, BIOS 1503 08/03/2018
RIP: 0010:huge_pte_alloc+0x12c/0x1a0
...
Call Trace:
<TASK>
? __die_body+0x63/0xb0
? die+0x9f/0xc0
? do_trap+0xab/0x180
? huge_pte_alloc+0x12c/0x1a0
? do_error_trap+0xc6/0x110
? huge_pte_alloc+0x12c/0x1a0
? handle_invalid_op+0x2c/0x40
? huge_pte_alloc+0x12c/0x1a0
? exc_invalid_op+0x33/0x50
? asm_exc_invalid_op+0x16/0x20
? __pfx_put_prev_task_idle+0x10/0x10
? huge_pte_alloc+0x12c/0x1a0
hugetlb_fault+0x1a3/0x1120
? finish_task_switch+0xb3/0x2a0
? lock_is_held_type+0xdb/0x150
handle_mm_fault+0xb8a/0xd40
? find_vma+0x5d/0xa0
do_user_addr_fault+0x257/0x5d0
exc_page_fault+0x7b/0x1f0
asm_exc_page_fault+0x22/0x30
That happens because a BUG() statement in huge_pte_alloc() attempts to
check that a pte, if present, is a hugetlb pte, but it does so in a
non-lockless-safe manner that leads to a false BUG() report.
We got here due to a couple of bugs, each of which by itself was not quite
enough to cause a problem:
First of all, before commit c33c794828f2("mm: ptep_get() conversion"), the
BUG() statement in huge_pte_alloc() was itself fragile: it relied upon
compiler behavior to only read the pte once, despite using it twice in the
same conditional.
Next, commit c33c794828f2 ("mm: ptep_get() conversion") broke that
delicate situation, by causing all direct pte reads to be done via
READ_ONCE(). And so READ_ONCE() got called twice within the same BUG()
conditional, leading to comparing (potentially, occasionally) different
versions of the pte, and thus to false BUG() reports.
Fix this by taking a single snapshot of the pte before using it in the
BUG conditional.
Now, that commit is only partially to blame here but, people doing
bisections will invariably land there, so this will help them find a fix
for a real crash. And also, the previous behavior was unlikely to ever
expose this bug--it was fragile, yet not actually broken.
So that's why I chose this commit for the Fixes tag, rather than the
commit that created the original BUG() statement.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: c33c794828f2 ("mm: ptep_get() conversion")
Signed-off-by: John Hubbard <[email protected]>
Acked-by: James Houghton <[email protected]>
Acked-by: Muchun Song <[email protected]>
Reviewed-by: Ryan Roberts <[email protected]>
Acked-by: Mike Kravetz <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Al Viro <[email protected]>
Cc: Alex Williamson <[email protected]>
Cc: Alexander Potapenko <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andrey Konovalov <[email protected]>
Cc: Andrey Ryabinin <[email protected]>
Cc: Christian Brauner <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Daniel Vetter <[email protected]>
Cc: Dave Airlie <[email protected]>
Cc: Dimitri Sivanich <[email protected]>
Cc: Dmitry Vyukov <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jason Gunthorpe <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Johannes Weiner <[email protected]>
Cc: Kirill A. Shutemov <[email protected]>
Cc: Lorenzo Stoakes <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Miaohe Lin <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Mike Rapoport (IBM) <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Naoya Horiguchi <[email protected]>
Cc: Oleksandr Tyshchenko <[email protected]>
Cc: Pavel Tatashin <[email protected]>
Cc: Roman Gushchin <[email protected]>
Cc: SeongJae Park <[email protected]>
Cc: Shakeel Butt <[email protected]>
Cc: Uladzislau Rezki (Sony) <[email protected]>
Cc: Vincenzo Frascino <[email protected]>
Cc: Yu Zhao <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
The ocfs2-devel mailing list has been migrated to the kernel.org
infrastructure, update all related documentation pointers to reflect the
change.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Anthony Iliopoulos <[email protected]>
Acked-by: Joseph Qi <[email protected]>
Acked-by: Joel Becker <[email protected]>
Cc: Changwei Ge <[email protected]>
Cc: Gang He <[email protected]>
Cc: Jun Piao <[email protected]>
Cc: Junxiao Bi <[email protected]>
Cc: Mark Fasheh <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
The ocfs2-devel mailing list has been migrated to the kernel.org
infrastructure, update the related entry to reflect the change.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Anthony Iliopoulos <[email protected]>
Acked-by: Joseph Qi <[email protected]>
Acked-by: Joel Becker <[email protected]>
Cc: Mark Fasheh <[email protected]>
Cc: Junxiao Bi <[email protected]>
Cc: Changwei Ge <[email protected]>
Cc: Gang He <[email protected]>
Cc: Jun Piao <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
A memory corruption was reported in [1] with bisection pointing to the
patch [2] enabling per-VMA locks for x86. Disable per-VMA locks config to
prevent this issue until the fix is confirmed. This is expected to be a
temporary measure.
[1] https://bugzilla.kernel.org/show_bug.cgi?id=217624
[2] https://lore.kernel.org/all/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Reported-by: Jiri Slaby <[email protected]>
Closes: https://lore.kernel.org/all/[email protected]/
Reported-by: Jacob Young <[email protected]>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217624
Fixes: 0bff0aaea03e ("x86/mm: try VMA lock-based page fault handling first")
Signed-off-by: Suren Baghdasaryan <[email protected]>
Cc: David Hildenbrand <[email protected]>
Cc: Holger Hoffstätte <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Patch series "Avoid memory corruption caused by per-VMA locks", v4.
A memory corruption was reported in [1] with bisection pointing to the
patch [2] enabling per-VMA locks for x86. Based on the reproducer
provided in [1] we suspect this is caused by the lack of VMA locking while
forking a child process.
Patch 1/2 in the series implements proper VMA locking during fork. I
tested the fix locally using the reproducer and was unable to reproduce
the memory corruption problem.
This fix can potentially regress some fork-heavy workloads. Kernel build
time did not show noticeable regression on a 56-core machine while a
stress test mapping 10000 VMAs and forking 5000 times in a tight loop
shows ~7% regression. If such fork time regression is unacceptable,
disabling CONFIG_PER_VMA_LOCK should restore its performance. Further
optimizations are possible if this regression proves to be problematic.
Patch 2/2 disables per-VMA locks until the fix is tested and verified.
This patch (of 2):
When forking a child process, parent write-protects an anonymous page and
COW-shares it with the child being forked using copy_present_pte().
Parent's TLB is flushed right before we drop the parent's mmap_lock in
dup_mmap(). If we get a write-fault before that TLB flush in the parent,
and we end up replacing that anonymous page in the parent process in
do_wp_page() (because, COW-shared with the child), this might lead to some
stale writable TLB entries targeting the wrong (old) page. Similar issue
happened in the past with userfaultfd (see flush_tlb_page() call inside
do_wp_page()).
Lock VMAs of the parent process when forking a child, which prevents
concurrent page faults during fork operation and avoids this issue. This
fix can potentially regress some fork-heavy workloads. Kernel build time
did not show noticeable regression on a 56-core machine while a stress
test mapping 10000 VMAs and forking 5000 times in a tight loop shows ~7%
regression. If such fork time regression is unacceptable, disabling
CONFIG_PER_VMA_LOCK should restore its performance. Further optimizations
are possible if this regression proves to be problematic.
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 0bff0aaea03e ("x86/mm: try VMA lock-based page fault handling first")
Signed-off-by: Suren Baghdasaryan <[email protected]>
Suggested-by: David Hildenbrand <[email protected]>
Reported-by: Jiri Slaby <[email protected]>
Closes: https://lore.kernel.org/all/[email protected]/
Reported-by: Holger Hoffstätte <[email protected]>
Closes: https://lore.kernel.org/all/[email protected]/
Reported-by: Jacob Young <[email protected]>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=3D217624
Reviewed-by: Liam R. Howlett <[email protected]>
Acked-by: David Hildenbrand <[email protected]>
Tested-by: Holger Hoffsttte <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
It seems the text for the NTB MSI Test Client section was copied from the
NTB Tool Test Client, but was not updated for the new section. Corrects
the NTB MSI Test Client section text.
Reviewed-by: Logan Gunthorpe <[email protected]>
Reviewed-by: Dave Jiang <[email protected]>
Signed-off-by: Geoff Levand <[email protected]>
Signed-off-by: Jon Mason <[email protected]>
|
|
With both the ntb_transport_init and the ntb_netdev_init_module routines in the
module_init init group, the ntb_netdev_init_module routine can be called before
the ntb_transport_init routine that it depends on is called. To assure the
proper initialization order put ntb_netdev_init_module in the late_initcall
group.
Fixes runtime errors where the ntb_netdev_init_module call fails with ENODEV.
Signed-off-by: Geoff Levand <[email protected]>
Reviewed-by: Dave Jiang <[email protected]>
Signed-off-by: Jon Mason <[email protected]>
|
|
Remove pci_clear_master to simplify the code,
the bus-mastering is also cleared in do_pci_disable_device,
like this:
./drivers/pci/pci.c:2197
static void do_pci_disable_device(struct pci_dev *dev)
{
u16 pci_command;
pci_read_config_word(dev, PCI_COMMAND, &pci_command);
if (pci_command & PCI_COMMAND_MASTER) {
pci_command &= ~PCI_COMMAND_MASTER;
pci_write_config_word(dev, PCI_COMMAND, pci_command);
}
pcibios_disable_device(dev);
}.
And dev->is_busmaster is set to 0 in pci_disable_device.
Signed-off-by: Cai Huoqing <[email protected]>
Acked-by: Dave Jiang <[email protected]>
Signed-off-by: Jon Mason <[email protected]>
|
|
Remove pci_clear_master to simplify the code,
the bus-mastering is also cleared in do_pci_disable_device,
like this:
./drivers/pci/pci.c:2197
static void do_pci_disable_device(struct pci_dev *dev)
{
u16 pci_command;
pci_read_config_word(dev, PCI_COMMAND, &pci_command);
if (pci_command & PCI_COMMAND_MASTER) {
pci_command &= ~PCI_COMMAND_MASTER;
pci_write_config_word(dev, PCI_COMMAND, pci_command);
}
pcibios_disable_device(dev);
}.
And dev->is_busmaster is set to 0 in pci_disable_device.
Signed-off-by: Cai Huoqing <[email protected]>
Signed-off-by: Jon Mason <[email protected]>
|
|
Remove pci_clear_master to simplify the code,
the bus-mastering is also cleared in do_pci_disable_device,
like this:
./drivers/pci/pci.c:2197
static void do_pci_disable_device(struct pci_dev *dev)
{
u16 pci_command;
pci_read_config_word(dev, PCI_COMMAND, &pci_command);
if (pci_command & PCI_COMMAND_MASTER) {
pci_command &= ~PCI_COMMAND_MASTER;
pci_write_config_word(dev, PCI_COMMAND, pci_command);
}
pcibios_disable_device(dev);
}.
And dev->is_busmaster is set to 0 in pci_disable_device.
Signed-off-by: Cai Huoqing <[email protected]>
Signed-off-by: Jon Mason <[email protected]>
|
|
pci_enable_pcie_error_reporting() enables the device to send ERR_*
Messages. Since f26e58bf6f54 ("PCI/AER: Enable error reporting when AER is
native"), the PCI core does this for all devices during enumeration, so the
driver doesn't need to do it itself.
Remove the redundant pci_enable_pcie_error_reporting() call from the
driver. Also remove the corresponding pci_disable_pcie_error_reporting()
from the driver .remove() path.
Note that this only controls ERR_* Messages from the device. An ERR_*
Message may cause the Root Port to generate an interrupt, depending on the
AER Root Error Command register managed by the AER service driver.
Signed-off-by: Bjorn Helgaas <[email protected]>
Acked-by: Serge Semin <[email protected]>
Signed-off-by: Jon Mason <[email protected]>
|
|
Github deprecated the git:// links about a year ago, so let's move to
the https:// URLs instead.
Reported-by: Conor Dooley <[email protected]>
Link: https://github.blog/2021-09-01-improving-git-protocol-security-github/
Signed-off-by: Palmer Dabbelt <[email protected]>
Signed-off-by: Jon Mason <[email protected]>
|
|
As ntb_register_device() don't handle error of device_register(),
if ntb_register_device() returns error in pci_vntb_probe(), name of kobject
which is allocated in dev_set_name() called in device_add() is leaked.
As comment of device_add() says, it should call put_device() to drop the
reference count that was set in device_initialize()
when it fails, so the name can be freed in kobject_cleanup().
Signed-off-by: ruanjinjie <[email protected]>
Signed-off-by: Jon Mason <[email protected]>
|
|
As the devm_kcalloc may return NULL pointer,
it should be better to add check for the return
value, as same as the others.
Fixes: 7f46c8b3a552 ("NTB: ntb_tool: Add full multi-port NTB API support")
Signed-off-by: Jiasheng Jiang <[email protected]>
Reviewed-by: Serge Semin <[email protected]>
Reviewed-by: Dave Jiang <[email protected]>
Signed-off-by: Jon Mason <[email protected]>
|
|
If device_register() returns error, the name allocated by
dev_set_name() need be freed. As comment of device_register()
says, it should use put_device() to give up the reference in
the error path. So fix this by calling put_device(), then the
name can be freed in kobject_cleanup(), and client_dev is freed
in ntb_transport_client_release().
Fixes: fce8a7bb5b4b ("PCI-Express Non-Transparent Bridge Support")
Signed-off-by: Yang Yingliang <[email protected]>
Reviewed-by: Dave Jiang <[email protected]>
Signed-off-by: Jon Mason <[email protected]>
|
|
A problem about ntb_hw_intel create debugfs failed is triggered with the
following log given:
[ 273.112733] Intel(R) PCI-E Non-Transparent Bridge Driver 2.0
[ 273.115342] debugfs: Directory 'ntb_hw_intel' with parent '/' already present!
The reason is that intel_ntb_pci_driver_init() returns
pci_register_driver() directly without checking its return value, if
pci_register_driver() failed, it returns without destroy the newly created
debugfs, resulting the debugfs of ntb_hw_intel can never be created later.
intel_ntb_pci_driver_init()
debugfs_create_dir() # create debugfs directory
pci_register_driver()
driver_register()
bus_add_driver()
priv = kzalloc(...) # OOM happened
# return without destroy debugfs directory
Fix by removing debugfs when pci_register_driver() returns error.
Fixes: e26a5843f7f5 ("NTB: Split ntb_hw_intel and ntb_transport drivers")
Signed-off-by: Yuan Can <[email protected]>
Acked-by: Dave Jiang <[email protected]>
Signed-off-by: Jon Mason <[email protected]>
|
|
A problem about ntb_hw_amd create debugfs failed is triggered with the
following log given:
[ 618.431232] AMD(R) PCI-E Non-Transparent Bridge Driver 1.0
[ 618.433284] debugfs: Directory 'ntb_hw_amd' with parent '/' already present!
The reason is that amd_ntb_pci_driver_init() returns pci_register_driver()
directly without checking its return value, if pci_register_driver()
failed, it returns without destroy the newly created debugfs, resulting
the debugfs of ntb_hw_amd can never be created later.
amd_ntb_pci_driver_init()
debugfs_create_dir() # create debugfs directory
pci_register_driver()
driver_register()
bus_add_driver()
priv = kzalloc(...) # OOM happened
# return without destroy debugfs directory
Fix by removing debugfs when pci_register_driver() returns error.
Fixes: a1b3695820aa ("NTB: Add support for AMD PCI-Express Non-Transparent Bridge")
Signed-off-by: Yuan Can <[email protected]>
Signed-off-by: Jon Mason <[email protected]>
|
|
A problem about ntb_hw_idt create debugfs failed is triggered with the
following log given:
[ 1236.637636] IDT PCI-E Non-Transparent Bridge Driver 2.0
[ 1236.639292] debugfs: Directory 'ntb_hw_idt' with parent '/' already present!
The reason is that idt_pci_driver_init() returns pci_register_driver()
directly without checking its return value, if pci_register_driver()
failed, it returns without destroy the newly created debugfs, resulting
the debugfs of ntb_hw_idt can never be created later.
idt_pci_driver_init()
debugfs_create_dir() # create debugfs directory
pci_register_driver()
driver_register()
bus_add_driver()
priv = kzalloc(...) # OOM happened
# return without destroy debugfs directory
Fix by removing debugfs when pci_register_driver() returns error.
Fixes: bf2a952d31d2 ("NTB: Add IDT 89HPESxNTx PCIe-switches support")
Signed-off-by: Yuan Can <[email protected]>
Signed-off-by: Jon Mason <[email protected]>
|
|
Amit Klein reported that udp6_ehash_secret was initialized but never used.
Fixes: 1bbdceef1e53 ("inet: convert inet_ehash_secret and ipv6_hash_secret to net_get_random_once")
Reported-by: Amit Klein <[email protected]>
Signed-off-by: Eric Dumazet <[email protected]>
Cc: Willy Tarreau <[email protected]>
Cc: Willem de Bruijn <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Hannes Frederic Sowa <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The 'MSG_MORE' state of the previous sendmsg() is fetched without the
socket lock held, so two sendmsg calls can race. This can be seen with a
large sendfile() as that now does a series of sendmsg() calls, and if a
write() comes in on the same socket at an inopportune time, it can flip the
state.
Fix this by moving the fetch of ctx->more inside the socket lock.
Fixes: c662b043cdca ("crypto: af_alg/hash: Support MSG_SPLICE_PAGES")
Reported-by: [email protected]
Link: https://lore.kernel.org/r/[email protected]/
Signed-off-by: David Howells <[email protected]>
Tested-by: [email protected]
cc: Herbert Xu <[email protected]>
cc: Paolo Abeni <[email protected]>
cc: "David S. Miller" <[email protected]>
cc: Eric Dumazet <[email protected]>
cc: Jakub Kicinski <[email protected]>
cc: [email protected]
cc: [email protected]
Signed-off-by: Herbert Xu <[email protected]>
|
|
With some IPv6 Ext Hdr (RPL, SRv6, etc.), we can send a packet that
has the link-local address as src and dst IP and will be forwarded to
an external IP in the IPv6 Ext Hdr.
For example, the script below generates a packet whose src IP is the
link-local address and dst is updated to 11::.
# for f in $(find /proc/sys/net/ -name *seg6_enabled*); do echo 1 > $f; done
# python3
>>> from socket import *
>>> from scapy.all import *
>>>
>>> SRC_ADDR = DST_ADDR = "fe80::5054:ff:fe12:3456"
>>>
>>> pkt = IPv6(src=SRC_ADDR, dst=DST_ADDR)
>>> pkt /= IPv6ExtHdrSegmentRouting(type=4, addresses=["11::", "22::"], segleft=1)
>>>
>>> sk = socket(AF_INET6, SOCK_RAW, IPPROTO_RAW)
>>> sk.sendto(bytes(pkt), (DST_ADDR, 0))
For such a packet, we call ip6_route_input() to look up a route for the
next destination in these three functions depending on the header type.
* ipv6_rthdr_rcv()
* ipv6_rpl_srh_rcv()
* ipv6_srh_rcv()
If no route is found, ip6_null_entry is set to skb, and the following
dst_input(skb) calls ip6_pkt_drop().
Finally, in icmp6_dev(), we dereference skb_rt6_info(skb)->rt6i_idev->dev
as the input device is the loopback interface. Then, we have to check if
skb_rt6_info(skb)->rt6i_idev is NULL or not to avoid NULL pointer deref
for ip6_null_entry.
BUG: kernel NULL pointer dereference, address: 0000000000000000
PF: supervisor read access in kernel mode
PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP PTI
CPU: 0 PID: 157 Comm: python3 Not tainted 6.4.0-11996-gb121d614371c #35
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
RIP: 0010:icmp6_send (net/ipv6/icmp.c:436 net/ipv6/icmp.c:503)
Code: fe ff ff 48 c7 40 30 c0 86 5d 83 e8 c6 44 1c 00 e9 c8 fc ff ff 49 8b 46 58 48 83 e0 fe 0f 84 4a fb ff ff 48 8b 80 d0 00 00 00 <48> 8b 00 44 8b 88 e0 00 00 00 e9 34 fb ff ff 4d 85 ed 0f 85 69 01
RSP: 0018:ffffc90000003c70 EFLAGS: 00000286
RAX: 0000000000000000 RBX: 0000000000000001 RCX: 00000000000000e0
RDX: 0000000000000021 RSI: 0000000000000000 RDI: ffff888006d72a18
RBP: ffffc90000003d80 R08: 0000000000000000 R09: 0000000000000001
R10: ffffc90000003d98 R11: 0000000000000040 R12: ffff888006d72a10
R13: 0000000000000000 R14: ffff8880057fb800 R15: ffffffff835d86c0
FS: 00007f9dc72ee740(0000) GS:ffff88807dc00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 00000000057b2000 CR4: 00000000007506f0
PKRU: 55555554
Call Trace:
<IRQ>
ip6_pkt_drop (net/ipv6/route.c:4513)
ipv6_rthdr_rcv (net/ipv6/exthdrs.c:640 net/ipv6/exthdrs.c:686)
ip6_protocol_deliver_rcu (net/ipv6/ip6_input.c:437 (discriminator 5))
ip6_input_finish (./include/linux/rcupdate.h:781 net/ipv6/ip6_input.c:483)
__netif_receive_skb_one_core (net/core/dev.c:5455)
process_backlog (./include/linux/rcupdate.h:781 net/core/dev.c:5895)
__napi_poll (net/core/dev.c:6460)
net_rx_action (net/core/dev.c:6529 net/core/dev.c:6660)
__do_softirq (./arch/x86/include/asm/jump_label.h:27 ./include/linux/jump_label.h:207 ./include/trace/events/irq.h:142 kernel/softirq.c:554)
do_softirq (kernel/softirq.c:454 kernel/softirq.c:441)
</IRQ>
<TASK>
__local_bh_enable_ip (kernel/softirq.c:381)
__dev_queue_xmit (net/core/dev.c:4231)
ip6_finish_output2 (./include/net/neighbour.h:544 net/ipv6/ip6_output.c:135)
rawv6_sendmsg (./include/net/dst.h:458 ./include/linux/netfilter.h:303 net/ipv6/raw.c:656 net/ipv6/raw.c:914)
sock_sendmsg (net/socket.c:725 net/socket.c:748)
__sys_sendto (net/socket.c:2134)
__x64_sys_sendto (net/socket.c:2146 net/socket.c:2142 net/socket.c:2142)
do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120)
RIP: 0033:0x7f9dc751baea
Code: d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 15 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 7e c3 0f 1f 44 00 00 41 54 48 83 ec 30 44 89
RSP: 002b:00007ffe98712c38 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 00007ffe98712cf8 RCX: 00007f9dc751baea
RDX: 0000000000000060 RSI: 00007f9dc6460b90 RDI: 0000000000000003
RBP: 00007f9dc56e8be0 R08: 00007ffe98712d70 R09: 000000000000001c
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: ffffffffc4653600 R14: 0000000000000001 R15: 00007f9dc6af5d1b
</TASK>
Modules linked in:
CR2: 0000000000000000
---[ end trace 0000000000000000 ]---
RIP: 0010:icmp6_send (net/ipv6/icmp.c:436 net/ipv6/icmp.c:503)
Code: fe ff ff 48 c7 40 30 c0 86 5d 83 e8 c6 44 1c 00 e9 c8 fc ff ff 49 8b 46 58 48 83 e0 fe 0f 84 4a fb ff ff 48 8b 80 d0 00 00 00 <48> 8b 00 44 8b 88 e0 00 00 00 e9 34 fb ff ff 4d 85 ed 0f 85 69 01
RSP: 0018:ffffc90000003c70 EFLAGS: 00000286
RAX: 0000000000000000 RBX: 0000000000000001 RCX: 00000000000000e0
RDX: 0000000000000021 RSI: 0000000000000000 RDI: ffff888006d72a18
RBP: ffffc90000003d80 R08: 0000000000000000 R09: 0000000000000001
R10: ffffc90000003d98 R11: 0000000000000040 R12: ffff888006d72a10
R13: 0000000000000000 R14: ffff8880057fb800 R15: ffffffff835d86c0
FS: 00007f9dc72ee740(0000) GS:ffff88807dc00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 00000000057b2000 CR4: 00000000007506f0
PKRU: 55555554
Kernel panic - not syncing: Fatal exception in interrupt
Kernel Offset: disabled
Fixes: 4832c30d5458 ("net: ipv6: put host and anycast routes on device with address")
Reported-by: Wang Yufen <[email protected]>
Closes: https://lore.kernel.org/netdev/[email protected]/
Signed-off-by: Kuniyuki Iwashima <[email protected]>
Reviewed-by: David Ahern <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Niklas Schnelle says:
====================
s390/ism: Fixes to client handling
This is v2 of the patch previously titled "s390/ism: Detangle ISM client
IRQ and event forwarding". As suggested by Paolo Abeni I split the patch
up. While doing so I noticed another problem that was fixed by this patch
concerning the way the workqueues access the client structs. This means the
second patch turning the workqueues into simple direct calls also fixes
a problem. Finally I split off a third patch just for fixing
ism_unregister_client()s error path.
The code after these 3 patches is identical to the result of the v1 patch
except that I also turned the dev_err() for still registered DMBs into
a WARN().
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
When ism_unregister_client() is called but the client still has DMBs
registered it returns -EBUSY and prints an error. This only happens
after the client has already been unregistered however. This is
unexpected as the unregister claims to have failed. Furthermore as this
implies a client bug a WARN() is more appropriate. Thus move the
deregistration after the check and use WARN().
Fixes: 89e7d2ba61b7 ("net/ism: Add new API for client registration")
Signed-off-by: Niklas Schnelle <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Previously the clients_lock was protecting the clients array against
concurrent addition/removal of clients but was also accessed from IRQ
context. This meant that it had to be a spinlock and that the add() and
remove() callbacks in which clients need to do allocation and take
mutexes can't be called under the clients_lock. To work around this these
callbacks were moved to workqueues. This not only introduced significant
complexity but is also subtly broken in at least one way.
In ism_dev_init() and ism_dev_exit() clients[i]->tgt_ism is used to
communicate the added/removed ISM device to the work function. While
write access to client[i]->tgt_ism is protected by the clients_lock and
the code waits that there is no pending add/remove work before and after
setting clients[i]->tgt_ism this is not enough. The problem is that the
wait happens based on per ISM device counters. Thus a concurrent
ism_dev_init()/ism_dev_exit() for a different ISM device may overwrite
a clients[i]->tgt_ism between unlocking the clients_lock and the
subsequent wait for the work to finnish.
Thankfully with the clients_lock no longer held in IRQ context it can be
turned into a mutex which can be held during the calls to add()/remove()
completely removing the need for the workqueues and the associated
broken housekeeping including the per ISM device counters and the
clients[i]->tgt_ism.
Fixes: 89e7d2ba61b7 ("net/ism: Add new API for client registration")
Signed-off-by: Niklas Schnelle <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The clients array references all registered clients and is protected by
the clients_lock. Besides its use as general list of clients the clients
array is accessed in ism_handle_irq() to forward ISM device events to
clients.
While the clients_lock is taken in the IRQ handler when calling
handle_event() it is however incorrectly not held during the
client->handle_irq() call and for the preceding clients[] access leaving
it unprotected against concurrent client (un-)registration.
Furthermore the accesses to ism->sba_client_arr[] in ism_register_dmb()
and ism_unregister_dmb() are not protected by any lock. This is
especially problematic as the client ID from the ism->sba_client_arr[]
is not checked against NO_CLIENT and neither is the client pointer
checked.
Instead of expanding the use of the clients_lock further add a separate
array in struct ism_dev which references clients subscribed to the
device's events and IRQs. This array is protected by ism->lock which is
already taken in ism_handle_irq() and can be taken outside the IRQ
handler when adding/removing subscribers or the accessing
ism->sba_client_arr[]. This also means that the clients_lock is no
longer taken in IRQ context.
Fixes: 89e7d2ba61b7 ("net/ism: Add new API for client registration")
Signed-off-by: Niklas Schnelle <[email protected]>
Reviewed-by: Alexandra Winter <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Ian reported several skb corruptions triggered by rx-gro-list,
collecting different oops alike:
[ 62.624003] BUG: kernel NULL pointer dereference, address: 00000000000000c0
[ 62.631083] #PF: supervisor read access in kernel mode
[ 62.636312] #PF: error_code(0x0000) - not-present page
[ 62.641541] PGD 0 P4D 0
[ 62.644174] Oops: 0000 [#1] PREEMPT SMP NOPTI
[ 62.648629] CPU: 1 PID: 913 Comm: napi/eno2-79 Not tainted 6.4.0 #364
[ 62.655162] Hardware name: Supermicro Super Server/A2SDi-12C-HLN4F, BIOS 1.7a 10/13/2022
[ 62.663344] RIP: 0010:__udp_gso_segment (./include/linux/skbuff.h:2858
./include/linux/udp.h:23 net/ipv4/udp_offload.c:228 net/ipv4/udp_offload.c:261
net/ipv4/udp_offload.c:277)
[ 62.687193] RSP: 0018:ffffbd3a83b4f868 EFLAGS: 00010246
[ 62.692515] RAX: 00000000000000ce RBX: 0000000000000000 RCX: 0000000000000000
[ 62.699743] RDX: ffffa124def8a000 RSI: 0000000000000079 RDI: ffffa125952a14d4
[ 62.706970] RBP: ffffa124def8a000 R08: 0000000000000022 R09: 00002000001558c9
[ 62.714199] R10: 0000000000000000 R11: 00000000be554639 R12: 00000000000000e2
[ 62.721426] R13: ffffa125952a1400 R14: ffffa125952a1400 R15: 00002000001558c9
[ 62.728654] FS: 0000000000000000(0000) GS:ffffa127efa40000(0000)
knlGS:0000000000000000
[ 62.736852] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 62.742702] CR2: 00000000000000c0 CR3: 00000001034b0000 CR4: 00000000003526e0
[ 62.749948] Call Trace:
[ 62.752498] <TASK>
[ 62.779267] inet_gso_segment (net/ipv4/af_inet.c:1398)
[ 62.787605] skb_mac_gso_segment (net/core/gro.c:141)
[ 62.791906] __skb_gso_segment (net/core/dev.c:3403 (discriminator 2))
[ 62.800492] validate_xmit_skb (./include/linux/netdevice.h:4862
net/core/dev.c:3659)
[ 62.804695] validate_xmit_skb_list (net/core/dev.c:3710)
[ 62.809158] sch_direct_xmit (net/sched/sch_generic.c:330)
[ 62.813198] __dev_queue_xmit (net/core/dev.c:3805 net/core/dev.c:4210)
net/netfilter/core.c:626)
[ 62.821093] br_dev_queue_push_xmit (net/bridge/br_forward.c:55)
[ 62.825652] maybe_deliver (net/bridge/br_forward.c:193)
[ 62.829420] br_flood (net/bridge/br_forward.c:233)
[ 62.832758] br_handle_frame_finish (net/bridge/br_input.c:215)
[ 62.837403] br_handle_frame (net/bridge/br_input.c:298
net/bridge/br_input.c:416)
[ 62.851417] __netif_receive_skb_core.constprop.0 (net/core/dev.c:5387)
[ 62.866114] __netif_receive_skb_list_core (net/core/dev.c:5570)
[ 62.871367] netif_receive_skb_list_internal (net/core/dev.c:5638
net/core/dev.c:5727)
[ 62.876795] napi_complete_done (./include/linux/list.h:37
./include/net/gro.h:434 ./include/net/gro.h:429 net/core/dev.c:6067)
[ 62.881004] ixgbe_poll (drivers/net/ethernet/intel/ixgbe/ixgbe_main.c:3191)
[ 62.893534] __napi_poll (net/core/dev.c:6498)
[ 62.897133] napi_threaded_poll (./include/linux/netpoll.h:89
net/core/dev.c:6640)
[ 62.905276] kthread (kernel/kthread.c:379)
[ 62.913435] ret_from_fork (arch/x86/entry/entry_64.S:314)
[ 62.917119] </TASK>
In the critical scenario, rx-gro-list GRO-ed packets are fed, via a
bridge, both to the local input path and to an egress device (tun).
The segmentation of such packets unsafely writes to the cloned skbs
with shared heads.
This change addresses the issue by uncloning as needed the
to-be-segmented skbs.
Reported-by: Ian Kumlien <[email protected]>
Tested-by: Ian Kumlien <[email protected]>
Fixes: 3a1296a38d0c ("net: Support GRO/GSO fraglist chaining.")
Signed-off-by: Paolo Abeni <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Turning IRQs off is done by accessing Ethernet controller registers.
That can't be done until device's clock is enabled. It results in a SoC
hang otherwise.
This bug remained unnoticed for years as most bootloaders keep all
Ethernet interfaces turned on. It seems to only affect a niche SoC
family BCM47189. It has two Ethernet controllers but CFE bootloader uses
only the first one.
Fixes: 34322615cbaa ("net: bgmac: Mask interrupts during probe")
Signed-off-by: Rafał Miłecki <[email protected]>
Reviewed-by: Michal Kubiak <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Quiet down this gcc warning:
fs/xfs/xfs_fsops.c: In function ‘xfs_growfs_data’:
fs/xfs/xfs_fsops.c:219:21: error: ‘lastag_extended’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
219 | if (lastag_extended) {
| ^~~~~~~~~~~~~~~
fs/xfs/xfs_fsops.c:100:33: note: ‘lastag_extended’ was declared here
100 | bool lastag_extended;
| ^~~~~~~~~~~~~~~
By setting its value explicitly. From code analysis I don't think this
is a real problem, but I have better things to do than analyse this
closely.
Signed-off-by: Darrick J. Wong <[email protected]>
Reviewed-by: Dave Chinner <[email protected]>
|
|
Pull mmc fix from Ulf Hansson:
- Fix regression of detection of eMMC/SD/SDIO cards
* tag 'mmc-v6.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: Revert "mmc: core: Allow mmc_start_host() synchronously detect a card"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes that have been gathered recently:
- Two code-typo fixes in the new UMP core
- A fix in jack reporting to avoid the usage of mutex
- A potential data race fix in HD-audio core regmap code
- A potential data race fix in PCM allocation helper code
- HD-audio quirks for ASUS, Clevo and Unis machines
- Constifications in FireWire drivers"
* tag 'sound-fix-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/realtek: Add quirk for ASUS ROG GZ301V
ALSA: jack: Fix mutex call in snd_jack_report()
ALSA: seq: ump: fix typo in system_2p_ev_to_ump_midi1()
ALSA: hda/realtek: Whitespace fix
ALSA: hda/realtek: Add quirk for ASUS ROG G614Jx
ALSA: hda/realtek: Amend G634 quirk to enable rear speakers
ALSA: hda/realtek: Add quirk for ASUS ROG GA402X
ALSA: hda/realtek: Add quirk for ASUS ROG GX650P
ALSA: pcm: Fix potential data race at PCM memory allocation helpers
ALSA: hda: fix a possible null-pointer dereference due to data race in snd_hdac_regmap_sync()
ALSA: hda/realtek: Add quirks for Unis H3C Desktop B760 & Q760
ALSA: hda/realtek: Add quirk for Clevo NPx0SNx
ALSA: ump: Correct wrong byte size at converting a UMP System message
ALSA: fireface: make read-only const array for model names static
ALSA: oxfw: make read-only const array models static
|
|
Pull ceph updates from Ilya Dryomov:
"A bunch of CephFS fixups from Xiubo, mostly around dropping caps,
along with a fix for a regression in the readahead handling code which
sneaked in with the switch to netfs helpers"
* tag 'ceph-for-6.5-rc1' of https://github.com/ceph/ceph-client:
ceph: don't let check_caps skip sending responses for revoke msgs
ceph: issue a cap release immediately if no cap exists
ceph: trigger to flush the buffer when making snapshot
ceph: fix blindly expanding the readahead windows
ceph: add a dedicated private data for netfs rreq
ceph: voluntarily drop Xx caps for requests those touch parent mtime
ceph: try to dump the msgs when decoding fails
ceph: only send metrics when the MDS rank is ready
|
|
https://github.com/Paragon-Software-Group/linux-ntfs3
Pull ntfs3 updates from Konstantin Komarov:
"Updates:
- support /proc/fs/ntfs3/<dev>/volinfo and label
- alternative boot if primary boot is corrupted
- small optimizations
Fixes:
- fix endian problems
- fix logic errors
- code refactoring and reformatting"
* tag 'ntfs3_for_6.5' of https://github.com/Paragon-Software-Group/linux-ntfs3:
fs/ntfs3: Correct mode for label entry inside /proc/fs/ntfs3/
fs/ntfs3: Add support /proc/fs/ntfs3/<dev>/volinfo and /proc/fs/ntfs3/<dev>/label
fs/ntfs3: Fix endian problem
fs/ntfs3: Add ability to format new mft records with bigger/smaller header
fs/ntfs3: Code refactoring
fs/ntfs3: Code formatting
fs/ntfs3: Do not update primary boot in ntfs_init_from_boot()
fs/ntfs3: Alternative boot if primary boot is corrupted
fs/ntfs3: Mark ntfs dirty when on-disk struct is corrupted
fs/ntfs3: Fix ntfs_atomic_open
fs/ntfs3: Correct checking while generating attr_list
fs/ntfs3: Use __GFP_NOWARN allocation at ntfs_load_attr_list()
fs: ntfs3: Fix possible null-pointer dereferences in mi_read()
fs/ntfs3: Return error for inconsistent extended attributes
fs/ntfs3: Enhance sanity check while generating attr_list
fs/ntfs3: Use wrapper i_blocksize() in ntfs_zero_range()
ntfs: Fix panic about slab-out-of-bounds caused by ntfs_listxattr()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull fsnotify fix from Jan Kara:
"A fix for fanotify to disallow creating of mount or superblock marks
for kernel internal pseudo filesystems"
* tag 'fsnotify_for_v6.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
fanotify: disallow mount/sb marks on kernel internal pseudo fs
|
|
I observed poor performance of io_uring compared to synchronous IO. That
turns out to be caused by deeper CPU idle states entered with io_uring,
due to io_uring using plain schedule(), whereas synchronous IO uses
io_schedule().
The losses due to this are substantial. On my cascade lake workstation,
t/io_uring from the fio repository e.g. yields regressions between 20%
and 40% with the following command:
./t/io_uring -r 5 -X0 -d 1 -s 1 -c 1 -p 0 -S$use_sync -R 0 /mnt/t2/fio/write.0.0
This is repeatable with different filesystems, using raw block devices
and using different block devices.
Use io_schedule_prepare() / io_schedule_finish() in
io_cqring_wait_schedule() to address the difference.
After that using io_uring is on par or surpassing synchronous IO (using
registered files etc makes it reliably win, but arguably is a less fair
comparison).
There are other calls to schedule() in io_uring/, but none immediately
jump out to be similarly situated, so I did not touch them. Similarly,
it's possible that mutex_lock_io() should be used, but it's not clear if
there are cases where that matters.
Cc: [email protected] # 5.10+
Cc: Pavel Begunkov <[email protected]>
Cc: [email protected]
Cc: [email protected]
Signed-off-by: Andres Freund <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
[axboe: minor style fixup]
Signed-off-by: Jens Axboe <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull more RISC-V updates from Palmer Dabbelt:
- A bunch of fixes/cleanups from the first part of the merge window,
mostly related to ACPI and vector as those were large
- Some documentation improvements, mostly related to the new code
- The "riscv,isa" DT key is deprecated
- Support for link-time dead code elimination
- Support for minor fault registration in userfaultd
- A handful of cleanups around CMO alternatives
* tag 'riscv-for-linus-6.5-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (23 commits)
riscv: mm: mark noncoherent_supported as __ro_after_init
riscv: mm: mark CBO relate initialization funcs as __init
riscv: errata: thead: only set cbom size & noncoherent during boot
riscv: Select HAVE_ARCH_USERFAULTFD_MINOR
RISC-V: Document the ISA string parsing rules for ACPI
risc-v: Fix order of IPI enablement vs RCU startup
mm: riscv: fix an unsafe pte read in huge_pte_alloc()
dt-bindings: riscv: deprecate riscv,isa
RISC-V: drop error print from riscv_hartid_to_cpuid()
riscv: Discard vector state on syscalls
riscv: move memblock_allow_resize() after linear mapping is ready
riscv: Enable ARCH_SUSPEND_POSSIBLE for s2idle
riscv: vdso: include vdso/vsyscall.h for vdso_data
selftests: Test RISC-V Vector's first-use handler
riscv: vector: clear V-reg in the first-use trap
riscv: vector: only enable interrupts in the first-use trap
RISC-V: Fix up some vector state related build failures
RISC-V: Document that V registers are clobbered on syscalls
riscv: disable HAVE_LD_DEAD_CODE_DATA_ELIMINATION for LLD
riscv: enable HAVE_LD_DEAD_CODE_DATA_ELIMINATION
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix PCIe MEM size for pci2 node on Turris 1.x boards
- Two minor build fixes
Thanks to Christophe Leroy, Douglas Anderson, Pali Rohár, Petr Mladek,
and Randy Dunlap.
* tag 'powerpc-6.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc: dts: turris1x.dts: Fix PCIe MEM size for pci2 node
powerpc: Include asm/nmi.c in mobility.c for watchdog_hardlockup_set_timeout_pct()
powerpc: allow PPC_EARLY_DEBUG_CPM only when SERIAL_CPM=y
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor
Pull apparmor updates from John Johansen:
- fix missing error check for rhashtable_insert_fast
- add missing failure check in compute_xmatch_perms
- fix policy_compat permission remap with extended permissions
- fix profile verification and enable it
- fix kzalloc perms tables for shared dfas
- Fix kernel-doc header for verify_dfa_accept_index
- aa_buffer: Convert 1-element array to flexible array
- Return directly after a failed kzalloc() in two functions
- fix use of strcpy in policy_unpack_test
- fix kernel-doc complaints
- Fix some kernel-doc comments
* tag 'apparmor-pr-2023-07-06' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor:
apparmor: Fix kernel-doc header for verify_dfa_accept_index
apparmor: fix: kzalloc perms tables for shared dfas
apparmor: fix profile verification and enable it
apparmor: fix policy_compat permission remap with extended permissions
apparmor: aa_buffer: Convert 1-element array to flexible array
apparmor: add missing failure check in compute_xmatch_perms
apparmor: fix missing error check for rhashtable_insert_fast
apparmor: Return directly after a failed kzalloc() in two functions
AppArmor: Fix some kernel-doc comments
apparmor: fix use of strcpy in policy_unpack_test
apparmor: fix kernel-doc complaints
|
|
Parking CPUs in INIT works well, except for the crash case when the CPU
which invokes smp_park_other_cpus_in_init() is not the boot CPU. Sending
INIT to the boot CPU resets the whole machine.
Prevent this by validating that this runs on the boot CPU. If not fall back
and let CPUs hang in HLT.
Fixes: 45e34c8af58f ("x86/smp: Put CPUs into INIT on shutdown if possible")
Reported-by: Baokun Li <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Tested-by: Baokun Li <[email protected]>
Link: https://lore.kernel.org/r/87ttui91jo.ffs@tglx
|
|
Commit e4de20576986 ("MIPS: KVM: Fix NULL pointer dereference") missed
converting one place accessing cop0 registers, which results in a build
error, if KVM_MIPS_DEBUG_COP0_COUNTERS is enabled.
Fixes: e4de20576986 ("MIPS: KVM: Fix NULL pointer dereference")
Signed-off-by: Thomas Bogendoerfer <[email protected]>
Reviewed-by: Philippe Mathieu-Daudé <[email protected]>
|
|
The tracepoint has existed for 12 years, but it only covered udp
over the legacy IPv4 protocol. Having it enabled for udp6 removes
the unnecessary difference in error visibility.
Signed-off-by: Ivan Babrou <[email protected]>
Fixes: 296f7ea75b45 ("udp: add tracepoints for queueing skb to rcvbuf")
Acked-by: Paolo Abeni <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Remove the probe error path code that leaves the driver bound
to the device, but with essentially a dead device. This was
useful maybe twice early in the driver's life and no longer
makes sense to keep.
Fixes: 30a1e6d0f8e2 ("ionic: keep ionic dev on lif init fail")
Signed-off-by: Shannon Nelson <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Remove unnecessary early code development check and the WARN_ON
that it uses. The irq alloc and free paths have long been
cleaned up and this check shouldn't have stuck around so long.
Fixes: 77ceb68e29cc ("ionic: Add notifyq support")
Signed-off-by: Nitya Sunkad <[email protected]>
Signed-off-by: Shannon Nelson <[email protected]>
Reviewed-by: Jacob Keller <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Moved PTP pointer validation before its use to avoid smatch warning.
Also used kzalloc/kfree instead of devm_kzalloc/devm_kfree.
Fixes: 2ef4e45d99b1 ("octeontx2-af: Add PTP PPS Errata workaround on CN10K silicon")
Signed-off-by: Naveen Mamindlapalli <[email protected]>
Signed-off-by: Sunil Goutham <[email protected]>
Signed-off-by: Sai Krishna <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
In legacy silicon, promiscuous mode is only modified
through CGX mbox messages. In CN10KB silicon, it is modified
from CGX mbox and NIX. This breaks legacy application
behaviour. Fix this by removing call from NIX.
Fixes: d6c9784baf59 ("octeontx2-af: Invoke exact match functions if supported")
Signed-off-by: Ratheesh Kannoth <[email protected]>
Reviewed-by: Leon Romanovsky <[email protected]>
Reviewed-by: Michal Kubiak <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
As of commit 6c80a93be62d398e ("drm/fb-helper: Initialize fb-helper's
preferred BPP in prepare function"), the preferred_bpp parameter of
drm_fb_helper_prepare() defaults to 32 instead of
drm_mode_config.preferred_depth. Hence this also applies to
drm_fbdev_dma_setup(), which just passes its own preferred_bpp
parameter.
Fixes: b79fe9abd58bab73 ("drm/fbdev-dma: Implement fbdev emulation for GEM DMA helpers")
Signed-off-by: Geert Uytterhoeven <[email protected]>
Reviewed-by: Thomas Zimmermann <[email protected]>
Signed-off-by: Thomas Zimmermann <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/91f093ffe436a9f94d58fb2bfbc1407f1ebe8bb0.1688656591.git.geert+renesas@glider.be
|