aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2018-06-15crypto: chtls - use after free in chtls_pt_recvmsg()Dan Carpenter1-3/+2
We call chtls_free_skb() but then we dereference it on the next lines. Also "skb" can't be NULL, we just dereferenced it on the line before. I have moved the free down a couple lines to fix this issue. Fixes: 17a7d24aa89d ("crypto: chtls - generic handling of data and hdr") Signed-off-by: Dan Carpenter <[email protected]> Signed-off-by: Herbert Xu <[email protected]>
2018-06-15afs: Optimise callback breaking by not repeating volume lookupDavid Howells3-20/+107
At the moment, afs_break_callbacks calls afs_break_one_callback() for each separate FID it was given, and the latter looks up the volume individually for each one. However, this is inefficient if two or more FIDs have the same vid as we could reuse the volume. This is complicated by cell aliasing whereby we may have multiple cells sharing a volume and can therefore have multiple callback interests for any particular volume ID. At the moment afs_break_one_callback() scans the entire list of volumes we're getting from a server and breaks the appropriate callback in every matching volume, regardless of cell. This scan is done for every FID. Optimise callback breaking by the following means: (1) Sort the FID list by vid so that all FIDs belonging to the same volume are clumped together. This is done through the use of an indirection table as we cannot do an insertion sort on the afs_callback_break array as we decode FIDs into it as we subsequently also have to decode callback info into it that corresponds by array index only. We also don't really want to bubblesort afterwards if we can avoid it. (2) Sort the server->cb_interests array by vid so that all the matching volumes are grouped together. This permits the scan to stop after finding a record that has a higher vid. (3) When breaking FIDs, we try to keep server->cb_break_lock as long as possible, caching the start point in the array for that volume group as long as possible. It might make sense to add another layer in that list and have a refcounted volume ID anchor that has the matching interests attached to it rather than being in the list. This would allow the lock to be dropped without losing the cursor. Signed-off-by: David Howells <[email protected]>
2018-06-15afs: Display manually added cells in dynamic root mountDavid Howells7-27/+200
Alter the dynroot mount so that cells created by manipulation of /proc/fs/afs/cells and /proc/fs/afs/rootcell and by specification of a root cell as a module parameter will cause directories for those cells to be created in the dynamic root superblock for the network namespace[*]. To this end: (1) Only one dynamic root superblock is now created per network namespace and this is shared between all attempts to mount it. This makes it easier to find the superblock to modify. (2) When a dynamic root superblock is created, the list of cells is walked and directories created for each cell already defined. (3) When a new cell is added, if a dynamic root superblock exists, a directory is created for it. (4) When a cell is destroyed, the directory is removed. (5) These directories are created by calling lookup_one_len() on the root dir which automatically creates them if they don't exist. [*] Inasmuch as network namespaces are currently supported here. Signed-off-by: David Howells <[email protected]>
2018-06-15afs: Enable IPv6 DNS lookupsDavid Howells2-2/+2
Remove the restriction on DNS lookup upcalls that prevents ipv6 addresses from being looked up. Signed-off-by: David Howells <[email protected]>
2018-06-15bsg: fix race of bsg_open and bsg_unregisterAnatoliy Glagolev1-11/+11
The existing implementation allows races between bsg_unregister and bsg_open paths. bsg_unregister and request_queue cleanup and deletion may start and complete right after bsg_get_device (in bsg_open path) retrieves bsg_class_device and releases the mutex. Then bsg_open path touches freed memory of bsg_class_device and request_queue. One possible fix is to hold the mutex all the way through bsg_get_device instead of releasing it after bsg_class_device retrieval. Reviewed-by: Christoph Hellwig <[email protected]> Signed-Off-By: Anatoliy Glagolev <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2018-06-15block: remov blk_queue_invalidate_tagsChristoph Hellwig3-38/+1
This function is entirely unused, so remove it and the tag_queue_busy member of struct request_queue. Signed-off-by: Christoph Hellwig <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2018-06-15Merge branch 'nvme-4.18' of git://git.infradead.org/nvme into for-linusJens Axboe11-224/+154
Pull NVMe fixes from Christoph: "Fix various little regressions introduced in this merge window, plus a rework of the fibre channel connect and reconnect path to share the code instead of having separate sets of bugs. Last but not least a trivial trace point addition from Hannes." * 'nvme-4.18' of git://git.infradead.org/nvme: nvme-fabrics: fix and refine state checks in __nvmf_check_ready nvme-fabrics: handle the admin-only case properly in nvmf_check_ready nvme-fabrics: refactor queue ready check blk-mq: remove blk_mq_tagset_iter nvme: remove nvme_reinit_tagset nvme-fc: fix nulling of queue data on reconnect nvme-fc: remove reinit_request routine nvme-fc: change controllers first connect to use reconnect path nvme: don't rely on the changed namespace list log nvmet: free smart-log buffer after use nvme-rdma: fix error flow during mapping request data nvme: add bio remapping tracepoint nvme: fix NULL pointer dereference in nvme_init_subsystem
2018-06-15cfg80211: fix rcu in cfg80211_unregister_wdevDedy Lansky1-0/+1
Callers of cfg80211_unregister_wdev can free the wdev object immediately after this function returns. This may crash the kernel because this wdev object is still in use by other threads. Add synchronize_rcu() after list_del_rcu to make sure wdev object can be safely freed. Signed-off-by: Dedy Lansky <[email protected]> Signed-off-by: Johannes Berg <[email protected]>
2018-06-15mac80211: Move up init of TXQsToke Høiland-Jørgensen1-6/+6
On init, ieee80211_if_add() dumps the interface. Since that now includes a dump of the TXQ state, we need to initialise that before the dump happens. So move up the TXQ initialisation to to before the call to ieee80211_if_add(). Fixes: 52539ca89f36 ("cfg80211: Expose TXQ stats and parameters to userspace") Reported-by: Niklas Cassel <[email protected]> Signed-off-by: Toke Høiland-Jørgensen <[email protected]> Tested-by: Niklas Cassel <[email protected]> Signed-off-by: Johannes Berg <[email protected]>
2018-06-15mac80211_hwsim: fix module init error pathsJohannes Berg1-2/+9
We didn't free the workqueue on any errors, nor did we correctly check for rhashtable allocation errors, nor did we free the hashtable on error. Reported-by: Colin King <[email protected]> Reported-by: Dan Carpenter <[email protected]> Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Johannes Berg <[email protected]>
2018-06-15cfg80211: initialize sinfo in cfg80211_get_stationSven Eckelmann1-0/+2
Most of the implementations behind cfg80211_get_station will not initialize sinfo to zero before manipulating it. For example, the member "filled", which indicates the filled in parts of this struct, is often only modified by enabling certain bits in the bitfield while keeping the remaining bits in their original state. A caller without a preinitialized sinfo.filled can then no longer decide which parts of sinfo were filled in by cfg80211_get_station (or actually the underlying implementations). cfg80211_get_station must therefore take care that sinfo is initialized to zero. Otherwise, the caller may tries to read information which was not filled in and which must therefore also be considered uninitialized. In batadv_v_elp_get_throughput's case, an invalid "random" expected throughput may be stored for this neighbor and thus the B.A.T.M.A.N V algorithm may switch to non-optimal neighbors for certain destinations. Fixes: 7406353d43c8 ("cfg80211: implement cfg80211_get_station cfg80211 API") Reported-by: Thomas Lauer <[email protected]> Reported-by: Marcel Schmidt <[email protected]> Cc: [email protected] Signed-off-by: Sven Eckelmann <[email protected]> Signed-off-by: Johannes Berg <[email protected]>
2018-06-15nl80211: fix some kernel doc tag mistakesLuca Coelho1-14/+14
There is a bunch of tags marking constants with &, which means struct or enum name. Replace them with %, which is the correct tag for constants. Signed-off-by: Luca Coelho <[email protected]> Signed-off-by: Johannes Berg <[email protected]>
2018-06-15nvme-fabrics: fix and refine state checks in __nvmf_check_readyChristoph Hellwig1-20/+19
- make sure we only allow internally generates commands in any non-live state - only allow connect commands on non-live queues when actually in the new or connecting states - treat all other non-live, non-dead states the same as a default cach-all This fixes a regression where we could not shutdown a controller orderly as we didn't allow the internal generated Property Set command, and also ensures we don't accidentally let a Connect command through in the wrong state. Signed-off-by: Christoph Hellwig <[email protected]> Reviewed-by: James Smart <[email protected]>
2018-06-15nvme-fabrics: handle the admin-only case properly in nvmf_check_readyChristoph Hellwig1-1/+2
In the ADMIN_ONLY state we don't have any I/O queues, but we should accept all admin commands without further checks. Signed-off-by: Christoph Hellwig <[email protected]> Reviewed-by: Johannes Thumshirn <[email protected]> Reviewed-by: James Smart <[email protected]>
2018-06-15nvme-fabrics: refactor queue ready checkChristoph Hellwig5-50/+45
Move the is_connected check to the fibre channel transport, as it has no meaning for other transports. To facilitate this split out a new nvmf_fail_nonready_command helper that is called by the transport when it is asked to handle a command on a queue that is not ready. Also avoid a function call for the queue live fast path by inlining the check. Signed-off-by: Christoph Hellwig <[email protected]> Reviewed-by: James Smart <[email protected]>
2018-06-15Merge tag 'linux-kselftest-4.18-rc1-2' of ↵Linus Torvalds3-2/+17
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull more Kselftest updates from Shuah Khan: - fix a signedness bug in cgroups test - add ppc support for kprobe args tests * tag 'linux-kselftest-4.18-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: kselftest/cgroup: fix a signedness bug selftests/ftrace: Add ppc support for kprobe args tests
2018-06-15Merge tag 'sound-fix-4.18-rc1' of ↵Linus Torvalds12-26/+101
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Here is a collection of small fixes on top of the previous update. All small and obvious fixes. Mostly for usual suspects, USB-audio and HD-audio, but a few trivial error handling fixes for misc drivers as well" * tag 'sound-fix-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: usb-audio: Always create the interrupt pipe for the mixer ALSA: usb-audio: Add insertion control for UAC3 BADD ALSA: usb-audio: Change in connectors control creation interface ALSA: usb-audio: Add bi-directional terminal types ALSA: lx6464es: add error handling for pci_ioremap_bar ALSA: sonicvibes: add error handling for snd_ctl_add ALSA: usb-audio: Remove explicitly listed Mytek devices ALSA: usb-audio: Generic DSD detection for XMOS-based implementations ALSA: usb-audio: Add native DSD support for Mytek DACs ALSA: hda/realtek - Add shutup hint ALSA: usb-audio: Disable the quirk for Nura headset ALSA: hda: add dock and led support for HP ProBook 640 G4 ALSA: hda: add dock and led support for HP EliteBook 830 G5 ALSA: emu10k1: add error handling for snd_ctl_add ALSA: fm801: add error handling for snd_ctl_add
2018-06-15Merge tag 'drm-next-2018-06-15' of git://anongit.freedesktop.org/drm/drmLinus Torvalds43-249/+365
Pull amd drm fixes from Dave Airlie: "Just a single set of AMD fixes for stuff in -next for -rc1" * tag 'drm-next-2018-06-15' of git://anongit.freedesktop.org/drm/drm: (47 commits) drm/amd/powerplay: Set higher SCLK&MCLK frequency than dpm7 in OD (v2) drm/amd/powerplay: remove uncessary extra gfxoff control call drm/amdgpu: fix parsing indirect register list v2 drm/amd/include: Update df 3.6 mask and shift definition drm/amd/pp: Fix OD feature enable failed on Vega10 workstation cards drm/amd/display: Fix stale buffer object (bo) use drm/amd/pp: initialize result to before or'ing in data drm/amd/powerplay: fix wrong clock adjust sequence drm/amdgpu: Grab/put runtime PM references in atomic_commit_tail() drm/amd/powerplay: fix missed hwmgr check warning before call gfx_off_control handler drm/amdgpu: fix CG enabling hang with gfxoff enabled drm/amdgpu: fix clear_all and replace handling in the VM (v2) drm/amdgpu: add checking for sos version drm/amdgpu: fix the missed vcn fw version report Revert "drm/amdgpu: Add an ATPX quirk for hybrid laptop" drm/amdgpu/df: fix potential array out-of-bounds read drm/amdgpu: Fix NULL pointer when load kfd driver with PP block is disabled drm/gfx9: Update gc goldensetting for vega20. drm/amd/pp: Allow underclocking when od table is empty in vbios drm/amdgpu/display: check if ppfuncs exists before using it ...
2018-06-15smb3: fix corrupt path in subdirs on smb311 with posixSteve French1-1/+2
Signed-off-by: Steve French <[email protected]>
2018-06-15smb3: do not display empty interface listSteve French1-1/+3
If server does not support listing interfaces then do not display empty "Server interfaces" line to avoid confusing users. Signed-off-by: Steve French <[email protected]> CC: Aurelien Aptel <[email protected]>
2018-06-15smb3: Fix mode on mkdir on smb311 mountsSteve French6-3/+175
mkdir was not passing the mode on smb3.11 mounts with posix extensions Signed-off-by: Steve French <[email protected]>
2018-06-15cifs: Fix kernel oops when traceSMB is enabledPaulo Alcantara1-5/+5
When traceSMB is enabled through 'echo 1 > /proc/fs/cifs/traceSMB', after a mount, the following oops is triggered: [ 27.137943] BUG: unable to handle kernel paging request at ffff8800f80c268b [ 27.143396] PGD 2c6b067 P4D 2c6b067 PUD 0 [ 27.145386] Oops: 0000 [#1] SMP PTI [ 27.146186] CPU: 2 PID: 2655 Comm: mount.cifs Not tainted 4.17.0+ #39 [ 27.147174] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014 [ 27.148969] RIP: 0010:hex_dump_to_buffer+0x413/0x4b0 [ 27.149738] Code: 48 8b 44 24 08 31 db 45 31 d2 48 89 6c 24 18 44 89 6c 24 24 48 c7 c1 78 b5 23 82 4c 89 64 24 10 44 89 d5 41 89 dc 4c 8d 58 02 <44> 0f b7 00 4d 89 dd eb 1f 83 c5 01 41 01 c4 41 39 ef 0f 84 48 fe [ 27.152396] RSP: 0018:ffffc9000058f8c0 EFLAGS: 00010246 [ 27.153129] RAX: ffff8800f80c268b RBX: 0000000000000000 RCX: ffffffff8223b578 [ 27.153867] RDX: 0000000000000000 RSI: ffffffff81a55496 RDI: 0000000000000008 [ 27.154612] RBP: 0000000000000000 R08: 0000000000000020 R09: 0000000000000083 [ 27.155355] R10: 0000000000000000 R11: ffff8800f80c268d R12: 0000000000000000 [ 27.156101] R13: 0000000000000002 R14: ffffc9000058f94d R15: 0000000000000008 [ 27.156838] FS: 00007f1693a6b740(0000) GS:ffff88007fd00000(0000) knlGS:0000000000000000 [ 27.158354] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 27.159093] CR2: ffff8800f80c268b CR3: 00000000798fa001 CR4: 0000000000360ee0 [ 27.159892] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 27.160661] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 27.161464] Call Trace: [ 27.162123] print_hex_dump+0xd3/0x160 [ 27.162814] journal-offline (2658) used greatest stack depth: 13144 bytes left [ 27.162824] ? __release_sock+0x60/0xd0 [ 27.165344] ? tcp_sendmsg+0x31/0x40 [ 27.166177] dump_smb+0x39/0x40 [ 27.166972] ? vsnprintf+0x236/0x490 [ 27.167807] __smb_send_rqst.constprop.12+0x103/0x430 [ 27.168554] ? apic_timer_interrupt+0xa/0x20 [ 27.169306] smb_send_rqst+0x48/0xc0 [ 27.169984] cifs_send_recv+0xda/0x420 [ 27.170639] SMB2_negotiate+0x23d/0xfa0 [ 27.171301] ? vsnprintf+0x236/0x490 [ 27.171961] ? smb2_negotiate+0x19/0x30 [ 27.172586] smb2_negotiate+0x19/0x30 [ 27.173257] cifs_negotiate_protocol+0x70/0xd0 [ 27.173935] ? kstrdup+0x43/0x60 [ 27.174551] cifs_get_smb_ses+0x295/0xbe0 [ 27.175260] ? lock_timer_base+0x67/0x80 [ 27.175936] ? __internal_add_timer+0x1a/0x50 [ 27.176575] ? add_timer+0x10f/0x230 [ 27.177267] cifs_mount+0x101/0x1190 [ 27.177940] ? cifs_smb3_do_mount+0x144/0x5c0 [ 27.178575] cifs_smb3_do_mount+0x144/0x5c0 [ 27.179270] mount_fs+0x35/0x150 [ 27.179930] vfs_kern_mount.part.28+0x54/0xf0 [ 27.180567] do_mount+0x5ad/0xc40 [ 27.181234] ? kmem_cache_alloc_trace+0xed/0x1a0 [ 27.181916] ksys_mount+0x80/0xd0 [ 27.182535] __x64_sys_mount+0x21/0x30 [ 27.183220] do_syscall_64+0x4e/0x100 [ 27.183882] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 27.184535] RIP: 0033:0x7f169339055a [ 27.185192] Code: 48 8b 0d 41 d9 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 0e d9 2b 00 f7 d8 64 89 01 48 [ 27.187268] RSP: 002b:00007fff7b44eb58 EFLAGS: 00000202 ORIG_RAX: 00000000000000a5 [ 27.188515] RAX: ffffffffffffffda RBX: 00007f1693a7e70e RCX: 00007f169339055a [ 27.189244] RDX: 000055b9f97f64e5 RSI: 000055b9f97f652c RDI: 00007fff7b45074f [ 27.189974] RBP: 000055b9fb8c9260 R08: 000055b9fb8ca8f0 R09: 0000000000000000 [ 27.190721] R10: 0000000000000000 R11: 0000000000000202 R12: 000055b9fb8ca8f0 [ 27.191429] R13: 0000000000000000 R14: 00007f1693a7c000 R15: 00007f1693a7e91d [ 27.192167] Modules linked in: [ 27.192797] CR2: ffff8800f80c268b [ 27.193435] ---[ end trace 67404c618badf323 ]--- The problem was that dump_smb() had been called with an invalid pointer, that is, in __smb_send_rqst(), iov[1] doesn't exist (n_vec == 1). This patch fixes it by relying on the n_vec value to dump out the smb packets. Signed-off-by: Paulo Alcantara <[email protected]> Signed-off-by: Steve French <[email protected]> Reviewed-by: Ronnie Sahlberg <[email protected]>
2018-06-15CIFS: dump every session iface infoAurelien Aptel1-0/+27
Signed-off-by: Aurelien Aptel <[email protected]> Signed-off-by: Steve French <[email protected]>
2018-06-15CIFS: parse and store info on iface queriesAurelien Aptel1-15/+155
Signed-off-by: Aurelien Aptel <[email protected]> Signed-off-by: Steve French <[email protected]>
2018-06-15CIFS: add iface info to struct cifs_sesAurelien Aptel2-0/+23
Signed-off-by: Aurelien Aptel <[email protected]> Signed-off-by: Steve French <[email protected]>
2018-06-15CIFS: complete PDU definitions for interface queriesAurelien Aptel1-3/+20
Signed-off-by: Aurelien Aptel <[email protected]> Signed-off-by: Steve French <[email protected]>
2018-06-15CIFS: move default port definitions to cifsglob.hAurelien Aptel2-3/+3
Signed-off-by: Aurelien Aptel <[email protected]> Signed-off-by: Steve French <[email protected]>
2018-06-15cifs: Fix encryption/signingPaulo Alcantara1-2/+2
Since the rfc1002 generation was moved down to __smb_send_rqst(), the transform header is now in rqst->rq_iov[0]. Correctly assign the transform header pointer in crypt_message(). Signed-off-by: Paulo Alcantara <[email protected]> Reviewed-by: Ronnie Sahlberg <[email protected]> Signed-off-by: Steve French <[email protected]>
2018-06-15cifs: update __smb_send_rqst() to take an array of requestsRonnie Sahlberg1-35/+44
Signed-off-by: Ronnie Sahlberg <[email protected]> Signed-off-by: Steve French <[email protected]>
2018-06-15cifs: remove smb2_send_recv()Ronnie Sahlberg3-42/+116
Now that we have the plumbing to pass request without an rfc1002 header all the way down to the point we write to the socket we no longer need the smb2_send_recv() function. Signed-off-by: Ronnie Sahlberg <[email protected]> Signed-off-by: Steve French <[email protected]>
2018-06-15cifs: push rfc1002 generation down the stackRonnie Sahlberg6-135/+99
Move the generation of the 4 byte length field down the stack and generate it immediately before we start writing the data to the socket. Signed-off-by: Ronnie Sahlberg <[email protected]> Signed-off-by: Aurelien Aptel <[email protected]> Signed-off-by: Steve French <[email protected]>
2018-06-15smb3: increase initial number of credits requested to allow writeSteve French1-2/+3
Compared to other clients the Linux smb3 client ramps up credits very slowly, taking more than 128 operations before a maximum size write could be sent (since the number of credits requested is only 2 per small operation, causing the credit limit to grow very slowly). This lack of credits initially would impact large i/o performance, when large i/o is tried early before enough credits are built up. Signed-off-by: Steve French <[email protected]> Reviewed-by: Ronnie Sahlberg <[email protected]>
2018-06-15cifs: minor documentation updatesSteve French3-11/+16
Various minor cifs/smb3 documentation updates Signed-off-by: Steve French <[email protected]> Reviewed-by: Ronnie Sahlberg <[email protected]>
2018-06-15cifs: add lease tracking to the cached root fidRonnie Sahlberg6-20/+58
Use a read lease for the cached root fid so that we can detect when the content of the directory changes (via a break) at which time we close the handle. On next access to the root the handle will be reopened and cached again. Signed-off-by: Ronnie Sahlberg <[email protected]> Signed-off-by: Steve French <[email protected]>
2018-06-15smb3: note that smb3.11 posix extensions mount option is experimentalSteve French1-1/+4
Signed-off-by: Steve French <[email protected]>
2018-06-15afs: Show all of a server's addresses in /proc/fs/afs/serversDavid Howells1-2/+8
Show all of a server's addresses in /proc/fs/afs/servers, placing the second plus addresses on padded lines of their own. The current address is marked with a star. Signed-off-by: David Howells <[email protected]>
2018-06-15afs: Handle CONFIG_PROC_FS=nDavid Howells2-2/+10
The AFS filesystem depends at the moment on /proc for configuration and also presents information that way - however, this causes a compilation failure if procfs is disabled. Fix it so that the procfs bits aren't compiled in if procfs is disabled. This means that you can't configure the AFS filesystem directly, but it is still usable provided that an up-to-date keyutils is installed to look up cells by SRV or AFSDB DNS records. Reported-by: Al Viro <[email protected]> Signed-off-by: David Howells <[email protected]>
2018-06-15proc: Make inline name size calculation automaticDavid Howells4-12/+16
Make calculation of the size of the inline name in struct proc_dir_entry automatic, rather than having to manually encode the numbers and failing to allow for lockdep. Require a minimum inline name size of 33+1 to allow for names that look like two hex numbers with a dash between. Reported-by: Al Viro <[email protected]> Signed-off-by: David Howells <[email protected]> Signed-off-by: Al Viro <[email protected]>
2018-06-15orangefs: simplify compat ioctl handlingAl Viro1-42/+12
no need to mess with copy_in_user(), etc... Signed-off-by: Al Viro <[email protected]>
2018-06-15signalfd: lift sigmask copyin and size checks to callers of do_signalfd4()Al Viro1-25/+25
Signed-off-by: Al Viro <[email protected]>
2018-06-14hv_netvsc: Fix the variable sizes in ipsecv2 and rsc offloadHaiyang Zhang1-13/+13
These fields in struct ndis_ipsecv2_offload and struct ndis_rsc_offload are one byte according to the specs. This patch defines them with the right size. These structs are not in use right now, but will be used soon. Signed-off-by: Haiyang Zhang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-06-14rds: avoid unenecessary cong_update in loop transportSantosh Shilimkar3-0/+11
Loop transport which is self loopback, remote port congestion update isn't relevant. Infact the xmit path already ignores it. Receive path needs to do the same. Reported-by: [email protected] Reviewed-by: Sowmini Varadhan <[email protected]> Signed-off-by: Santosh Shilimkar <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-06-15Merge branch 'drm-next-4.18' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie43-255/+372
into drm-next Fixes for 4.18. Highlights: - Fixes for gfxoff on Raven - Remove an ATPX quirk now that the root cause is fixed - Runtime PM fixes - Vega20 register header update - Wattman fixes - Misc bug fixes Signed-off-by: Dave Airlie <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-06-15bpf, selftests: delete xfrm tunnel when test exits.William Tu1-11/+13
Make the printting of bpf xfrm tunnel better and cleanup xfrm state and policy when xfrm test finishes. Signed-off-by: William Tu <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]>
2018-06-15bpf, selftest: check tunnel type more accuratelyJian Wang1-1/+1
Grep tunnel type directly to make sure 'ip' command supports it. Signed-off-by: Jian Wang <[email protected]> Acked-by: Yonghong Song <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]>
2018-06-15Merge branch 'bpf-misc-fixes'Daniel Borkmann2-3/+13
Jakub Kicinski says: ==================== This small series allows test_offload.py selftest to run on modern distributions which may create BPF programs for cgroups at boot, like Ubuntu 18.04. We still expect the program list to not be altered by any other agent while the test is running, but no longer depend on there being no BPF programs at all at the start. Fixing the test revealed a small problem with bpftool, which doesn't report the program load time very accurately. Because nanoseconds were not taken into account reported load time would fluctuate by 1 second. First patch of the series takes care of fixing that. ==================== Signed-off-by: Daniel Borkmann <[email protected]>
2018-06-15selftests/bpf: test offloads even with BPF programs presentJakub Kicinski1-2/+10
Modern distroes increasingly make use of BPF programs. Default Ubuntu 18.04 installation boots with a number of cgroup_skb programs loaded. test_offloads.py tries to check if programs and maps are not leaked on error paths by confirming the list of programs on the system is empty between tests. Since we can no longer expect the system to have no BPF objects at boot try to remember the programs and maps present at the start, and skip those when scanning the system. Signed-off-by: Jakub Kicinski <[email protected]> Reviewed-by: Quentin Monnet <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]>
2018-06-15tools: bpftool: improve accuracy of load timeJakub Kicinski1-1/+3
BPF program load time is reported from the kernel relative to boot time. If conversion to wall clock does not take nanosecond parts into account, the load time reported by bpftool may differ by one second from run to run. This means JSON object reported by bpftool for a program will randomly change. Fixes: 71bb428fe2c1 ("tools: bpf: add bpftool") Signed-off-by: Jakub Kicinski <[email protected]> Reviewed-by: Quentin Monnet <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]>
2018-06-14Merge branch 'l2tp-fixes'David S. Miller1-0/+26
Guillaume Nault says: ==================== l2tp: pppol2tp_connect() fixes This series fixes a few remaining issues with pppol2tp_connect(). It doesn't try to prevent invalid configurations that have no effect on kernel's reliability. That would be work for a future patch set. Patch 2 is the most important as it avoids an invalid pointer dereference crashing the kernel. It depends on patch 1 for correctly identifying L2TP session types. Patches 3 and 4 avoid creating stale tunnels and sessions. ==================== Signed-off-by: David S. Miller <[email protected]>
2018-06-14l2tp: clean up stale tunnel or session in pppol2tp_connect's error pathGuillaume Nault1-0/+10
pppol2tp_connect() may create a tunnel or a session. Remove them in case of error. Fixes: fd558d186df2 ("l2tp: Split pppol2tp patch into separate l2tp and ppp parts") Signed-off-by: Guillaume Nault <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.