aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2022-02-03Merge branch 'for-5.17-fixes' of ↵Linus Torvalds2-14/+65
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup Pull cgroup fixes from Tejun Heo: - Eric's fix for a long standing cgroup1 permission issue where it only checks for uid 0 instead of CAP which inadvertently allows unprivileged userns roots to modify release_agent userhelper - Fixes for the fallout from Waiman's recent cpuset work * 'for-5.17-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroup/cpuset: Fix "suspicious RCU usage" lockdep warning cgroup-v1: Require capabilities to set release_agent cpuset: Fix the bug that subpart_cpus updated wrongly in update_cpumask() cgroup/cpuset: Make child cpusets restrict parents on v1 hierarchy
2022-02-03Merge branch 'net-ipa-enable-register-retention'Jakub Kicinski4-0/+70
Alex Elder says: ==================== net: ipa: enable register retention With runtime power management in place, we sometimes need to issue a command to enable retention of IPA register values before power collapse. This requires a new Device Tree property, whose presence will also be used to signal that the command is required. ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-02-03net: ipa: request IPA register values be retainedAlex Elder3-0/+64
In some cases, the IPA hardware needs to request the always-on subsystem (AOSS) to coordinate with the IPA microcontroller to retain IPA register values at power collapse. This is done by issuing a QMP request to the AOSS microcontroller. A similar request ondoes that request. We must get and hold the "QMP" handle early, because we might get back EPROBE_DEFER for that. But the actual request should be sent while we know the IPA clock is active, and when we know the microcontroller is operational. Fixes: 1aac309d3207 ("net: ipa: use autosuspend") Signed-off-by: Alex Elder <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-02-03dt-bindings: net: qcom,ipa: add optional qcom,qmp propertyAlex Elder1-0/+6
For some systems, the IPA driver must make a request to ensure that its registers are retained across power collapse of the IPA hardware. On such systems, we'll use the existence of the "qcom,qmp" property as a signal that this request is required. Signed-off-by: Alex Elder <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-02-03cgroup/cpuset: Fix "suspicious RCU usage" lockdep warningWaiman Long1-0/+10
It was found that a "suspicious RCU usage" lockdep warning was issued with the rcu_read_lock() call in update_sibling_cpumasks(). It is because the update_cpumasks_hier() function may sleep. So we have to release the RCU lock, call update_cpumasks_hier() and reacquire it afterward. Also add a percpu_rwsem_assert_held() in update_sibling_cpumasks() instead of stating that in the comment. Fixes: 4716909cc5c5 ("cpuset: Track cpusets that use parent's effective_cpus") Signed-off-by: Waiman Long <[email protected]> Tested-by: Phil Auld <[email protected]> Reviewed-by: Phil Auld <[email protected]> Signed-off-by: Tejun Heo <[email protected]>
2022-02-03tools/resolve_btfids: Do not print any commands when building silentlyNathan Chancellor1-1/+5
When building with 'make -s', there is some output from resolve_btfids: $ make -sj"$(nproc)" oldconfig prepare MKDIR .../tools/bpf/resolve_btfids/libbpf/ MKDIR .../tools/bpf/resolve_btfids//libsubcmd LINK resolve_btfids Silent mode means that no information should be emitted about what is currently being done. Use the $(silent) variable from Makefile.include to avoid defining the msg macro so that there is no information printed. Fixes: fbbb68de80a4 ("bpf: Add resolve_btfids tool to resolve BTF IDs in ELF object") Signed-off-by: Nathan Chancellor <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2022-02-03Revert "mm/gup: small refactoring: simplify try_grab_page()"John Hubbard1-5/+30
This reverts commit 54d516b1d62ff8f17cee2da06e5e4706a0d00b8a That commit did a refactoring that effectively combined fast and slow gup paths (again). And that was again incorrect, for two reasons: a) Fast gup and slow gup get reference counts on pages in different ways and with different goals: see Linus' writeup in commit cd1adf1b63a1 ("Revert "mm/gup: remove try_get_page(), call try_get_compound_head() directly""), and b) try_grab_compound_head() also has a specific check for "FOLL_LONGTERM && !is_pinned(page)", that assumes that the caller can fall back to slow gup. This resulted in new failures, as recently report by Will McVicker [1]. But (a) has problems too, even though they may not have been reported yet. So just revert this. Link: https://lore.kernel.org/r/[email protected] [1] Fixes: 54d516b1d62f ("mm/gup: small refactoring: simplify try_grab_page()") Reported-and-tested-by: Will McVicker <[email protected]> Cc: Christoph Hellwig <[email protected]> Cc: Minchan Kim <[email protected]> Cc: Matthew Wilcox <[email protected]> Cc: Christian Borntraeger <[email protected]> Cc: Heiko Carstens <[email protected]> Cc: Vasily Gorbik <[email protected]> Cc: [email protected] # 5.15 Signed-off-by: John Hubbard <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2022-02-03Merge tag 'mips-fixes-5.17_2' of ↵Linus Torvalds2-4/+10
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS fixes from Thomas Bogendoerfer: - fix missed change for PTR->PTR_WD conversion - kernel-doc fixes * tag 'mips-fixes-5.17_2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: KVM: fix vz.c kernel-doc notation MIPS: octeon: Fix missed PTR->PTR_WD conversion
2022-02-03drm: mxsfb: Fix NULL pointer dereferenceAlexander Stein1-1/+5
mxsfb should not ever dereference the NULL pointer which drm_atomic_get_new_bridge_state is allowed to return. Assume a fixed format instead. Fixes: b776b0f00f24 ("drm: mxsfb: Use bus_format from the nearest bridge if present") Signed-off-by: Alexander Stein <[email protected]> Signed-off-by: Marek Vasut <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2022-02-02bpf: Use VM_MAP instead of VM_ALLOC for ringbufHou Tao1-1/+1
After commit 2fd3fb0be1d1 ("kasan, vmalloc: unpoison VM_ALLOC pages after mapping"), non-VM_ALLOC mappings will be marked as accessible in __get_vm_area_node() when KASAN is enabled. But now the flag for ringbuf area is VM_ALLOC, so KASAN will complain out-of-bound access after vmap() returns. Because the ringbuf area is created by mapping allocated pages, so use VM_MAP instead. After the change, info in /proc/vmallocinfo also changes from [start]-[end] 24576 ringbuf_map_alloc+0x171/0x290 vmalloc user to [start]-[end] 24576 ringbuf_map_alloc+0x171/0x290 vmap user Fixes: 457f44363a88 ("bpf: Implement BPF ring buffer and verifier support for it") Reported-by: [email protected] Signed-off-by: Hou Tao <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2022-02-03nvme-fabrics: fix state check in nvmf_ctlr_matches_baseopts()Uday Shankar1-0/+1
Controller deletion/reset, immediately followed by or concurrent with a reconnect, is hard failing the connect attempt resulting in a complete loss of connectivity to the controller. In the connect request, fabrics looks for an existing controller with the same address components and aborts the connect if a controller already exists and the duplicate connect option isn't set. The match routine filters out controllers that are dead or dying, so they don't interfere with the new connect request. When NVME_CTRL_DELETING_NOIO was added, it missed updating the state filters in the nvmf_ctlr_matches_baseopts() routine. Thus, when in this new state, it's seen as a live controller and fails the connect request. Correct by adding the DELETING_NIO state to the match checks. Fixes: ecca390e8056 ("nvme: fix deadlock in disconnect during scan_work and/or ana_work") Cc: <[email protected]> # v5.7+ Signed-off-by: Uday Shankar <[email protected]> Reviewed-by: James Smart <[email protected]> Reviewed-by: Sagi Grimberg <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]>
2022-02-03cifs: fix workstation_name for multiuser mountsRyan Bair2-1/+18
Set workstation_name from the master_tcon for multiuser mounts. Just in case, protect size_of_ntlmssp_blob against a NULL workstation_name. Fixes: 49bd49f983b5 ("cifs: send workstation name during ntlmssp session setup") Cc: [email protected] # 5.16 Reviewed-by: Paulo Alcantara (SUSE) <[email protected]> Signed-off-by: Ryan Bair <[email protected]> Signed-off-by: Steve French <[email protected]>
2022-02-03Invalidate fscache cookie only when inode attributes are changed.Rohith Surabattula1-4/+4
For example if mtime or size has changed. Signed-off-by: Rohith Surabattula <[email protected]> Reviewed-by: Shyam Prasad N <[email protected]> Signed-off-by: Steve French <[email protected]>
2022-02-02net, neigh: Do not trigger immediate probes on NUD_FAILED from ↵Daniel Borkmann2-11/+25
neigh_managed_work syzkaller was able to trigger a deadlock for NTF_MANAGED entries [0]: kworker/0:16/14617 is trying to acquire lock: ffffffff8d4dd370 (&tbl->lock){++-.}-{2:2}, at: ___neigh_create+0x9e1/0x2990 net/core/neighbour.c:652 [...] but task is already holding lock: ffffffff8d4dd370 (&tbl->lock){++-.}-{2:2}, at: neigh_managed_work+0x35/0x250 net/core/neighbour.c:1572 The neighbor entry turned to NUD_FAILED state, where __neigh_event_send() triggered an immediate probe as per commit cd28ca0a3dd1 ("neigh: reduce arp latency") via neigh_probe() given table lock was held. One option to fix this situation is to defer the neigh_probe() back to the neigh_timer_handler() similarly as pre cd28ca0a3dd1. For the case of NTF_MANAGED, this deferral is acceptable given this only happens on actual failure state and regular / expected state is NUD_VALID with the entry already present. The fix adds a parameter to __neigh_event_send() in order to communicate whether immediate probe is allowed or disallowed. Existing call-sites of neigh_event_send() default as-is to immediate probe. However, the neigh_managed_work() disables it via use of neigh_event_send_probe(). [0] <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_deadlock_bug kernel/locking/lockdep.c:2956 [inline] check_deadlock kernel/locking/lockdep.c:2999 [inline] validate_chain kernel/locking/lockdep.c:3788 [inline] __lock_acquire.cold+0x149/0x3ab kernel/locking/lockdep.c:5027 lock_acquire kernel/locking/lockdep.c:5639 [inline] lock_acquire+0x1ab/0x510 kernel/locking/lockdep.c:5604 __raw_write_lock_bh include/linux/rwlock_api_smp.h:202 [inline] _raw_write_lock_bh+0x2f/0x40 kernel/locking/spinlock.c:334 ___neigh_create+0x9e1/0x2990 net/core/neighbour.c:652 ip6_finish_output2+0x1070/0x14f0 net/ipv6/ip6_output.c:123 __ip6_finish_output net/ipv6/ip6_output.c:191 [inline] __ip6_finish_output+0x61e/0xe90 net/ipv6/ip6_output.c:170 ip6_finish_output+0x32/0x200 net/ipv6/ip6_output.c:201 NF_HOOK_COND include/linux/netfilter.h:296 [inline] ip6_output+0x1e4/0x530 net/ipv6/ip6_output.c:224 dst_output include/net/dst.h:451 [inline] NF_HOOK include/linux/netfilter.h:307 [inline] ndisc_send_skb+0xa99/0x17f0 net/ipv6/ndisc.c:508 ndisc_send_ns+0x3a9/0x840 net/ipv6/ndisc.c:650 ndisc_solicit+0x2cd/0x4f0 net/ipv6/ndisc.c:742 neigh_probe+0xc2/0x110 net/core/neighbour.c:1040 __neigh_event_send+0x37d/0x1570 net/core/neighbour.c:1201 neigh_event_send include/net/neighbour.h:470 [inline] neigh_managed_work+0x162/0x250 net/core/neighbour.c:1574 process_one_work+0x9ac/0x1650 kernel/workqueue.c:2307 worker_thread+0x657/0x1110 kernel/workqueue.c:2454 kthread+0x2e9/0x3a0 kernel/kthread.c:377 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295 </TASK> Fixes: 7482e3841d52 ("net, neigh: Add NTF_MANAGED flag for managed neighbor entries") Reported-by: [email protected] Signed-off-by: Daniel Borkmann <[email protected]> Cc: Eric Dumazet <[email protected]> Cc: Roopa Prabhu <[email protected]> Tested-by: [email protected] Reviewed-by: David Ahern <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-02-02tcp: add missing tcp_skb_can_collapse() test in tcp_shift_skb_data()Eric Dumazet1-0/+2
tcp_shift_skb_data() might collapse three packets into a larger one. P_A, P_B, P_C -> P_ABC Historically, it used a single tcp_skb_can_collapse_to(P_A) call, because it was enough. In commit 85712484110d ("tcp: coalesce/collapse must respect MPTCP extensions"), this call was replaced by a call to tcp_skb_can_collapse(P_A, P_B) But the now needed test over P_C has been missed. This probably broke MPTCP. Then later, commit 9b65b17db723 ("net: avoid double accounting for pure zerocopy skbs") added an extra condition to tcp_skb_can_collapse(), but the missing call from tcp_shift_skb_data() is also breaking TCP zerocopy, because P_A and P_C might have different skb_zcopy_pure() status. Fixes: 85712484110d ("tcp: coalesce/collapse must respect MPTCP extensions") Fixes: 9b65b17db723 ("net: avoid double accounting for pure zerocopy skbs") Signed-off-by: Eric Dumazet <[email protected]> Cc: Mat Martineau <[email protected]> Cc: Talal Ahmad <[email protected]> Cc: Arjun Roy <[email protected]> Cc: Willem de Bruijn <[email protected]> Acked-by: Soheil Hassas Yeganeh <[email protected]> Acked-by: Paolo Abeni <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-02-03MAINTAINERS: add myself as PATA drivers reviewerSergey Shtylyov1-0/+6
Add myself as a reviewer for the libata PATA drivers -- there is activity in this area still... 8-) Having been hacking on ATA from the early 90s, I think I deserved this highly responsible position, at last! :-) Signed-off-by: Sergey Shtylyov <[email protected]> Signed-off-by: Damien Le Moal <[email protected]>
2022-02-02drm/amdgpu: fix logic inversion in checkChristian König1-1/+1
We probably never trigger this, but the logic inside the check is inverted. Signed-off-by: Christian König <[email protected]> Reviewed-by: Felix Kuehling <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-02-02drm/amd: avoid suspend on dGPUs w/ s2idle support when runtime PM enabledMario Limonciello1-2/+1
dGPUs connected to Intel systems configured for suspend to idle will not have the power rails cut at suspend and resetting the GPU may lead to problematic behaviors. Fixes: e25443d2765f4 ("drm/amdgpu: add a dev_pm_ops prepare callback (v2)") Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1879 Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Mario Limonciello <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-02-02drm/amd/display: Force link_rate as LINK_RATE_RBR2 for 2018 15" Apple Retina ↵Aun-Ali Zaidi1-0/+20
panels The eDP link rate reported by the DP_MAX_LINK_RATE dpcd register (0xa) is contradictory to the highest rate supported reported by EDID (0xc = LINK_RATE_RBR2). The effects of this compounded with commit '4a8ca46bae8a ("drm/amd/display: Default max bpc to 16 for eDP")' results in no display modes being found and a dark panel. For now, simply force the maximum supported link rate for the eDP attached 2018 15" Apple Retina panels. Additionally, we must also check the firmware revision since the device ID reported by the DPCD is identical to that of the more capable 16,1, incorrectly quirking it. We also use said firmware check to quirk the refreshed 15,1 models with Vega graphics as they use a slightly newer firmware version. Tested-by: Aun-Ali Zaidi <[email protected]> Reviewed-by: Harry Wentland <[email protected]> Signed-off-by: Aun-Ali Zaidi <[email protected]> Signed-off-by: Aditya Garg <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2022-02-02drm/amd/display: revert "Reset fifo after enable otg"Zhan Liu6-31/+0
[Why] This change causes regression, that prevents some systems from lighting up internal displays. [How] Revert this patch until a new solution is ready. Tested-by: Daniel Wheeler <[email protected]> Reviewed-by: Charlene Liu <[email protected]> Acked-by: Stylon Wang <[email protected]> Signed-off-by: Zhan Liu <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2022-02-02drm/amd/display: watermark latencies is not enough on DCN31Paul Hsieh1-10/+10
[Why] The original latencies were causing underflow in some modes. Resolution: 2880x1620@60p when HDR enable [How] 1. Replace with the up-to-date watermark values based on new measurments 2. Correct the ddr_wm_table name to DDR5 on DCN31 Tested-by: Daniel Wheeler <[email protected]> Reviewed-by: Aric Cyr <[email protected]> Acked-by: Stylon Wang <[email protected]> Signed-off-by: Paul Hsieh <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2022-02-02drm/amd/display: Update watermark values for DCN301Agustin Gutierrez1-8/+8
[Why] There is underflow / visual corruption DCN301, for high bandwidth MST DSC configurations such as 2x1440p144 or 2x4k60. [How] Use up-to-date watermark values for DCN301. Reviewed-by: Zhan Liu <[email protected]> Signed-off-by: Agustin Gutierrez <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2022-02-02drm/amdgpu: fix a potential GPU hang on cyan skillfishLang Yu1-0/+3
We observed a GPU hang when querying GMC CG state(i.e., cat amdgpu_pm_info) on cyan skillfish. Acctually, cyan skillfish doesn't support any CG features. Just prevent it from accessing GMC CG registers. Signed-off-by: Lang Yu <[email protected]> Reviewed-by: Lijo Lazar <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2022-02-02drm/amd: Only run s3 or s0ix if system is configured properlyMario Limonciello1-0/+8
This will cause misconfigured systems to not run the GPU suspend routines. * In APUs that are properly configured system will go into s2idle. * In APUs that are intended to be S3 but user selects s2idle the GPU will stay fully powered for the suspend. * In APUs that are intended to be s2idle and system misconfigured the GPU will stay fully powered for the suspend. * In systems that are intended to be s2idle, but AMD dGPU is also present, the dGPU will go through S3 Signed-off-by: Mario Limonciello <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-02-02drm/amd: add support to check whether the system is set to s3Mario Limonciello2-0/+15
This will be used to help make decisions on what to do in misconfigured systems. v2: squash in semicolon fix from Stephen Rothwell Signed-off-by: Mario Limonciello <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-02-02Merge tag 'nfsd-5.17-1' of ↵Linus Torvalds2-9/+13
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux Pull nfsd fixes from Chuck Lever: "Notable bug fixes: - Ensure SM_NOTIFY doesn't crash the NFS server host - Ensure NLM locks are cleaned up after client reboot - Fix a leak of internal NFSv4 lease information" * tag 'nfsd-5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: nfsd: nfsd4_setclientid_confirm mistakenly expires confirmed client. lockd: fix failure to cleanup client locks lockd: fix server crash on reboot of client holding lock
2022-02-02md: fix NULL pointer deref with nowait but no mddev->queueSong Liu1-4/+4
Leon reported NULL pointer deref with nowait support: [ 15.123761] device-mapper: raid: Loading target version 1.15.1 [ 15.124185] device-mapper: raid: Ignoring chunk size parameter for RAID 1 [ 15.124192] device-mapper: raid: Choosing default region size of 4MiB [ 15.129524] BUG: kernel NULL pointer dereference, address: 0000000000000060 [ 15.129530] #PF: supervisor write access in kernel mode [ 15.129533] #PF: error_code(0x0002) - not-present page [ 15.129535] PGD 0 P4D 0 [ 15.129538] Oops: 0002 [#1] PREEMPT SMP NOPTI [ 15.129541] CPU: 5 PID: 494 Comm: ldmtool Not tainted 5.17.0-rc2-1-mainline #1 9fe89d43dfcb215d2731e6f8851740520778615e [ 15.129546] Hardware name: Gigabyte Technology Co., Ltd. X570 AORUS ELITE/X570 AORUS ELITE, BIOS F36e 10/14/2021 [ 15.129549] RIP: 0010:blk_queue_flag_set+0x7/0x20 [ 15.129555] Code: 00 00 00 0f 1f 44 00 00 48 8b 35 e4 e0 04 02 48 8d 57 28 bf 40 01 \ 00 00 e9 16 c1 be ff 66 0f 1f 44 00 00 0f 1f 44 00 00 89 ff <f0> 48 0f ab 7e 60 \ 31 f6 89 f7 c3 66 66 2e 0f 1f 84 00 00 00 00 00 [ 15.129559] RSP: 0018:ffff966b81987a88 EFLAGS: 00010202 [ 15.129562] RAX: ffff8b11c363a0d0 RBX: ffff8b11e294b070 RCX: 0000000000000000 [ 15.129564] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 000000000000001d [ 15.129566] RBP: ffff8b11e294b058 R08: 0000000000000000 R09: 0000000000000000 [ 15.129568] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8b11e294b070 [ 15.129570] R13: 0000000000000000 R14: ffff8b11e294b000 R15: 0000000000000001 [ 15.129572] FS: 00007fa96e826780(0000) GS:ffff8b18deb40000(0000) knlGS:0000000000000000 [ 15.129575] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 15.129577] CR2: 0000000000000060 CR3: 000000010b8ce000 CR4: 00000000003506e0 [ 15.129580] Call Trace: [ 15.129582] <TASK> [ 15.129584] md_run+0x67c/0xc70 [md_mod 1e470c1b6bcf1114198109f42682f5a2740e9531] [ 15.129597] raid_ctr+0x134a/0x28ea [dm_raid 6a645dd7519e72834bd7e98c23497eeade14cd63] [ 15.129604] ? dm_split_args+0x63/0x150 [dm_mod 0d7b0bc3414340a79c4553bae5ca97294b78336e] [ 15.129615] dm_table_add_target+0x188/0x380 [dm_mod 0d7b0bc3414340a79c4553bae5ca97294b78336e] [ 15.129625] table_load+0x13b/0x370 [dm_mod 0d7b0bc3414340a79c4553bae5ca97294b78336e] [ 15.129635] ? dev_suspend+0x2d0/0x2d0 [dm_mod 0d7b0bc3414340a79c4553bae5ca97294b78336e] [ 15.129644] ctl_ioctl+0x1bd/0x460 [dm_mod 0d7b0bc3414340a79c4553bae5ca97294b78336e] [ 15.129655] dm_ctl_ioctl+0xa/0x20 [dm_mod 0d7b0bc3414340a79c4553bae5ca97294b78336e] [ 15.129663] __x64_sys_ioctl+0x8e/0xd0 [ 15.129667] do_syscall_64+0x5c/0x90 [ 15.129672] ? syscall_exit_to_user_mode+0x23/0x50 [ 15.129675] ? do_syscall_64+0x69/0x90 [ 15.129677] ? do_syscall_64+0x69/0x90 [ 15.129679] ? syscall_exit_to_user_mode+0x23/0x50 [ 15.129682] ? do_syscall_64+0x69/0x90 [ 15.129684] ? do_syscall_64+0x69/0x90 [ 15.129686] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 15.129689] RIP: 0033:0x7fa96ecd559b [ 15.129692] Code: ff ff ff 85 c0 79 9b 49 c7 c4 ff ff ff ff 5b 5d 4c 89 e0 41 5c \ c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff \ ff 73 01 c3 48 8b 0d a5 a8 0c 00 f7 d8 64 89 01 48 [ 15.129696] RSP: 002b:00007ffcaf85c258 EFLAGS: 00000206 ORIG_RAX: 0000000000000010 [ 15.129699] RAX: ffffffffffffffda RBX: 00007fa96f1b48f0 RCX: 00007fa96ecd559b [ 15.129701] RDX: 00007fa97017e610 RSI: 00000000c138fd09 RDI: 0000000000000003 [ 15.129702] RBP: 00007fa96ebab583 R08: 00007fa97017c9e0 R09: 00007ffcaf85bf27 [ 15.129704] R10: 0000000000000001 R11: 0000000000000206 R12: 00007fa97017e610 [ 15.129706] R13: 00007fa97017e640 R14: 00007fa97017e6c0 R15: 00007fa97017e530 [ 15.129709] </TASK> This is caused by missing mddev->queue check for setting QUEUE_FLAG_NOWAIT Fix this by moving the QUEUE_FLAG_NOWAIT logic to under mddev->queue check. Fixes: f51d46d0e7cb ("md: add support for REQ_NOWAIT") Reported-by: Leon Möller <[email protected]> Tested-by: Leon Möller <[email protected]> Cc: Vishal Verma <[email protected]> Signed-off-by: Song Liu <[email protected]>
2022-02-02Merge tag 'fsnotify_for_v5.17-rc3' of ↵Linus Torvalds1-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Pull fanotify fix from Jan Kara: "Fix stale file descriptor in copy_event_to_user" * tag 'fsnotify_for_v5.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: fanotify: Fix stale file descriptor in copy_event_to_user()
2022-02-02Merge tag 'linux-kselftest-kunit-fixes-5.17-rc3' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull KUnit fixes from Shuah Khan: "A single fix to an error seen on qemu due to a missing import" * tag 'linux-kselftest-kunit-fixes-5.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: kunit: tool: Import missing importlib.abc
2022-02-02libceph: optionally use bounce buffer on recv path in crc modeIlya Dryomov6-20/+105
Both msgr1 and msgr2 in crc mode are zero copy in the sense that message data is read from the socket directly into the destination buffer. We assume that the destination buffer is stable (i.e. remains unchanged while it is being read to) though. Otherwise, CRC errors ensue: libceph: read_partial_message 0000000048edf8ad data crc 1063286393 != exp. 228122706 libceph: osd1 (1)192.168.122.1:6843 bad crc/signature libceph: bad data crc, calculated 57958023, expected 1805382778 libceph: osd2 (2)192.168.122.1:6876 integrity error, bad crc Introduce rxbounce option to enable use of a bounce buffer when receiving message data. In particular this is needed if a mapped image is a Windows VM disk, passed to QEMU. Windows has a system-wide "dummy" page that may be mapped into the destination buffer (potentially more than once into the same buffer) by the Windows Memory Manager in an effort to generate a single large I/O [1][2]. QEMU makes a point of preserving overlap relationships when cloning I/O vectors, so krbd gets exposed to this behaviour. [1] "What Is Really in That MDL?" https://docs.microsoft.com/en-us/previous-versions/windows/hardware/design/dn614012(v=vs.85) [2] https://blogs.msmvps.com/kernelmustard/2005/05/04/dummy-pages/ URL: https://bugzilla.redhat.com/show_bug.cgi?id=1973317 Signed-off-by: Ilya Dryomov <[email protected]> Reviewed-by: Jeff Layton <[email protected]>
2022-02-02libceph: make recv path in secure mode work the same as send pathIlya Dryomov2-62/+158
The recv path of secure mode is intertwined with that of crc mode. While it's slightly more efficient that way (the ciphertext is read into the destination buffer and decrypted in place, thus avoiding two potentially heavy memory allocations for the bounce buffer and the corresponding sg array), it isn't really amenable to changes. Sacrifice that edge and align with the send path which always uses a full-sized bounce buffer (currently there is no other way -- if the kernel crypto API ever grows support for streaming (piecewise) en/decryption for GCM [1], we would be able to easily take advantage of that on both sides). [1] https://lore.kernel.org/all/[email protected]/ Signed-off-by: Ilya Dryomov <[email protected]> Reviewed-by: Jeff Layton <[email protected]>
2022-02-02Merge tag 'pinctrl-v5.17-2' of ↵Linus Torvalds9-105/+101
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control fixes from Linus Walleij: "Most interesting and urgent is the Intel stuff affecting Chromebooks and laptops. - Fix up group name building on the Intel Thunderbay - Fix interrupt problems on the Intel Cherryview - Fix some pin data on the Sunxi H616 - Fix up the CONFIG_PINCTRL_ST Kconfig sort order as noted during the merge window - Fix an unexpected interrupt problem on the Intel Sunrisepoint - Fix a glitch when updating IRQ flags on all Intel pin controllers - Revert a Zynqmp patch to unify the pin naming, let's find some better solution - Fix some error paths in the Broadcom BCM2835 driver - Fix a Kconfig problem pertaining to the BCM63XX drivers - Fix the regmap support in the Microchip SGPIO driver" * tag 'pinctrl-v5.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: microchip-sgpio: Fix support for regmap pinctrl: bcm63xx: fix unmet dependency on REGMAP for GPIO_REGMAP pinctrl: bcm2835: Fix a few error paths pinctrl: zynqmp: Revert "Unify pin naming" pinctrl: intel: Fix a glitch when updating IRQ flags on a preconfigured line pinctrl: intel: fix unexpected interrupt pinctrl: Place correctly CONFIG_PINCTRL_ST in the Makefile pinctrl: sunxi: Fix H616 I2S3 pin data pinctrl: cherryview: Trigger hwirq0 for interrupt-lines without a mapping pinctrl: thunderbay: rework loops looking for groups names pinctrl: thunderbay: comment process of building functions a bit
2022-02-02net: sparx5: do not refer to skb after passing it onSteen Hegelund1-1/+1
Do not try to use any SKB fields after the packet has been passed up in the receive stack. Reported-by: kernel test robot <[email protected]> Reported-by: Dan Carpenter <[email protected]> Signed-off-by: Steen Hegelund <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-02-02selinux: fix double free of cond_list on error pathsVratislav Bendel1-1/+2
On error path from cond_read_list() and duplicate_policydb_cond_list() the cond_list_destroy() gets called a second time in caller functions, resulting in NULL pointer deref. Fix this by resetting the cond_list_len to 0 in cond_list_destroy(), making subsequent calls a noop. Also consistently reset the cond_list pointer to NULL after freeing. Cc: [email protected] Signed-off-by: Vratislav Bendel <[email protected]> [PM: fix line lengths in the description] Signed-off-by: Paul Moore <[email protected]>
2022-02-02Partially revert "net/smc: Add netlink net namespace support"Dmitry V. Levin2-8/+5
The change of sizeof(struct smc_diag_linkinfo) by commit 79d39fc503b4 ("net/smc: Add netlink net namespace support") introduced an ABI regression: since struct smc_diag_lgrinfo contains an object of type "struct smc_diag_linkinfo", offset of all subsequent members of struct smc_diag_lgrinfo was changed by that change. As result, applications compiled with the old version of struct smc_diag_linkinfo will receive garbage in struct smc_diag_lgrinfo.role if the kernel implements this new version of struct smc_diag_linkinfo. Fix this regression by reverting the part of commit 79d39fc503b4 that changes struct smc_diag_linkinfo. After all, there is SMC_GEN_NETLINK interface which is good enough, so there is probably no need to touch the smc_diag ABI in the first place. Fixes: 79d39fc503b4 ("net/smc: Add netlink net namespace support") Signed-off-by: Dmitry V. Levin <[email protected]> Reviewed-by: Karsten Graul <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-02-02block: fix DIO handling regressions in blkdev_read_iter()Ilya Dryomov1-14/+19
Commit ceaa762527f4 ("block: move direct_IO into our own read_iter handler") introduced several regressions for bdev DIO: 1. read spanning EOF always returns 0 instead of the number of bytes read. This is because "count" is assigned early and isn't updated when the iterator is truncated: $ lsblk -o name,size /dev/vdb NAME SIZE vdb 1G $ xfs_io -d -c 'pread -b 4M 1021M 4M' /dev/vdb read 0/4194304 bytes at offset 1070596096 0.000000 bytes, 0 ops; 0.0007 sec (0.000000 bytes/sec and 0.0000 ops/sec) instead of $ xfs_io -d -c 'pread -b 4M 1021M 4M' /dev/vdb read 3145728/4194304 bytes at offset 1070596096 3 MiB, 1 ops; 0.0007 sec (3.865 GiB/sec and 1319.2612 ops/sec) 2. truncated iterator isn't reexpanded 3. iterator isn't reverted on blkdev_direct_IO() error 4. zero size read no longer skips atime update Fixes: ceaa762527f4 ("block: move direct_IO into our own read_iter handler") Signed-off-by: Ilya Dryomov <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]>
2022-02-02Merge tag 'mlx5-fixes-2022-02-01' of ↵David S. Miller17-55/+102
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5 fixes 2022-02-01 This series provides bug fixes to mlx5 driver. Please pull and let me know if there is any problem. Sorry about the long series, but I had to move the top two patches from net-next to net to help avoiding a build break when kspp branch is merged into linus-next on next merge window. ==================== Signed-off-by: David S. Miller <[email protected]>
2022-02-02fbcon: Add option to enable legacy hardware accelerationHelge Deller7-34/+84
Add a config option CONFIG_FRAMEBUFFER_CONSOLE_LEGACY_ACCELERATION to enable bitblt and fillrect hardware acceleration in the framebuffer console. If disabled, such acceleration will not be used, even if it is supported by the graphics hardware driver. If you plan to use DRM as your main graphics output system, you should disable this option since it will prevent compiling in code which isn't used later on when DRM takes over. For all other configurations, e.g. if none of your graphic cards support DRM (yet), DRM isn't available for your architecture, or you can't be sure that the graphic card in the target system will support DRM, you most likely want to enable this option. In the non-accelerated case (e.g. when DRM is used), the inlined fb_scrollmode() function is hardcoded to return SCROLL_REDRAW and as such the compiler is able to optimize much unneccesary code away. In this v3 patch version I additionally changed the GETVYRES() and GETVXRES() macros to take a pointer to the fbcon_display struct. This fixes the build when console rotation is enabled and helps the compiler again to optimize out code. Signed-off-by: Helge Deller <[email protected]> Cc: [email protected] # v5.10+ Signed-off-by: Helge Deller <[email protected]> Signed-off-by: Daniel Vetter <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2022-02-02Revert "fbcon: Disable accelerated scrolling"Helge Deller2-29/+37
This reverts commit 39aead8373b3c20bb5965c024dfb51a94e526151. Revert the first (of 2) commits which disabled scrolling acceleration in fbcon/fbdev. It introduced a regression for fbdev-supported graphic cards because of the performance penalty by doing screen scrolling by software instead of using the existing graphic card 2D hardware acceleration. Console scrolling acceleration was disabled by dropping code which checked at runtime the driver hardware capabilities for the BINFO_HWACCEL_COPYAREA or FBINFO_HWACCEL_FILLRECT flags and if set, it enabled scrollmode SCROLL_MOVE which uses hardware acceleration to move screen contents. After dropping those checks scrollmode was hard-wired to SCROLL_REDRAW instead, which forces all graphic cards to redraw every character at the new screen position when scrolling. This change effectively disabled all hardware-based scrolling acceleration for ALL drivers, because now all kind of 2D hardware acceleration (bitblt, fillrect) in the drivers isn't used any longer. The original commit message mentions that only 3 DRM drivers (nouveau, omapdrm and gma500) used hardware acceleration in the past and thus code for checking and using scrolling acceleration is obsolete. This statement is NOT TRUE, because beside the DRM drivers there are around 35 other fbdev drivers which depend on fbdev/fbcon and still provide hardware acceleration for fbdev/fbcon. The original commit message also states that syzbot found lots of bugs in fbcon and thus it's "often the solution to just delete code and remove features". This is true, and the bugs - which actually affected all users of fbcon, including DRM - were fixed, or code was dropped like e.g. the support for software scrollback in vgacon (commit 973c096f6a85). So to further analyze which bugs were found by syzbot, I've looked through all patches in drivers/video which were tagged with syzbot or syzkaller back to year 2005. The vast majority fixed the reported issues on a higher level, e.g. when screen is to be resized, or when font size is to be changed. The few ones which touched driver code fixed a real driver bug, e.g. by adding a check. But NONE of those patches touched code of either the SCROLL_MOVE or the SCROLL_REDRAW case. That means, there was no real reason why SCROLL_MOVE had to be ripped-out and just SCROLL_REDRAW had to be used instead. The only reason I can imagine so far was that SCROLL_MOVE wasn't used by DRM and as such it was assumed that it could go away. That argument completely missed the fact that SCROLL_MOVE is still heavily used by fbdev (non-DRM) drivers. Some people mention that using memcpy() instead of the hardware acceleration is pretty much the same speed. But that's not true, at least not for older graphic cards and machines where we see speed decreases by factor 10 and more and thus this change leads to console responsiveness way worse than before. That's why the original commit is to be reverted. By reverting we reintroduce hardware-based scrolling acceleration and fix the performance regression for fbdev drivers. There isn't any impact on DRM when reverting those patches. Signed-off-by: Helge Deller <[email protected]> Acked-by: Geert Uytterhoeven <[email protected]> Acked-by: Sven Schnelle <[email protected]> Cc: [email protected] # v5.10+ Signed-off-by: Helge Deller <[email protected]> Signed-off-by: Daniel Vetter <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2022-02-02Revert "fbdev: Garbage collect fbdev scrolling acceleration, part 1 (from ↵Helge Deller11-51/+678
TODO list)" This reverts commit b3ec8cdf457e5e63d396fe1346cc788cf7c1b578. Revert the second (of 2) commits which disabled scrolling acceleration in fbcon/fbdev. It introduced a regression for fbdev-supported graphic cards because of the performance penalty by doing screen scrolling by software instead of using the existing graphic card 2D hardware acceleration. Console scrolling acceleration was disabled by dropping code which checked at runtime the driver hardware capabilities for the BINFO_HWACCEL_COPYAREA or FBINFO_HWACCEL_FILLRECT flags and if set, it enabled scrollmode SCROLL_MOVE which uses hardware acceleration to move screen contents. After dropping those checks scrollmode was hard-wired to SCROLL_REDRAW instead, which forces all graphic cards to redraw every character at the new screen position when scrolling. This change effectively disabled all hardware-based scrolling acceleration for ALL drivers, because now all kind of 2D hardware acceleration (bitblt, fillrect) in the drivers isn't used any longer. The original commit message mentions that only 3 DRM drivers (nouveau, omapdrm and gma500) used hardware acceleration in the past and thus code for checking and using scrolling acceleration is obsolete. This statement is NOT TRUE, because beside the DRM drivers there are around 35 other fbdev drivers which depend on fbdev/fbcon and still provide hardware acceleration for fbdev/fbcon. The original commit message also states that syzbot found lots of bugs in fbcon and thus it's "often the solution to just delete code and remove features". This is true, and the bugs - which actually affected all users of fbcon, including DRM - were fixed, or code was dropped like e.g. the support for software scrollback in vgacon (commit 973c096f6a85). So to further analyze which bugs were found by syzbot, I've looked through all patches in drivers/video which were tagged with syzbot or syzkaller back to year 2005. The vast majority fixed the reported issues on a higher level, e.g. when screen is to be resized, or when font size is to be changed. The few ones which touched driver code fixed a real driver bug, e.g. by adding a check. But NONE of those patches touched code of either the SCROLL_MOVE or the SCROLL_REDRAW case. That means, there was no real reason why SCROLL_MOVE had to be ripped-out and just SCROLL_REDRAW had to be used instead. The only reason I can imagine so far was that SCROLL_MOVE wasn't used by DRM and as such it was assumed that it could go away. That argument completely missed the fact that SCROLL_MOVE is still heavily used by fbdev (non-DRM) drivers. Some people mention that using memcpy() instead of the hardware acceleration is pretty much the same speed. But that's not true, at least not for older graphic cards and machines where we see speed decreases by factor 10 and more and thus this change leads to console responsiveness way worse than before. That's why the original commit is to be reverted. By reverting we reintroduce hardware-based scrolling acceleration and fix the performance regression for fbdev drivers. There isn't any impact on DRM when reverting those patches. Signed-off-by: Helge Deller <[email protected]> Acked-by: Geert Uytterhoeven <[email protected]> Acked-by: Sven Schnelle <[email protected]> Cc: [email protected] # v5.16+ Signed-off-by: Helge Deller <[email protected]> Signed-off-by: Daniel Vetter <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2022-02-02nvme-rdma: fix possible use-after-free in transport error_recovery workSagi Grimberg1-0/+1
While nvme_rdma_submit_async_event_work is checking the ctrl and queue state before preparing the AER command and scheduling io_work, in order to fully prevent a race where this check is not reliable the error recovery work must flush async_event_work before continuing to destroy the admin queue after setting the ctrl state to RESETTING such that there is no race .submit_async_event and the error recovery handler itself changing the ctrl state. Signed-off-by: Sagi Grimberg <[email protected]>
2022-02-02nvme-tcp: fix possible use-after-free in transport error_recovery workSagi Grimberg1-0/+1
While nvme_tcp_submit_async_event_work is checking the ctrl and queue state before preparing the AER command and scheduling io_work, in order to fully prevent a race where this check is not reliable the error recovery work must flush async_event_work before continuing to destroy the admin queue after setting the ctrl state to RESETTING such that there is no race .submit_async_event and the error recovery handler itself changing the ctrl state. Tested-by: Chris Leech <[email protected]> Signed-off-by: Sagi Grimberg <[email protected]>
2022-02-02nvme: fix a possible use-after-free in controller reset during loadSagi Grimberg1-1/+8
Unlike .queue_rq, in .submit_async_event drivers may not check the ctrl readiness for AER submission. This may lead to a use-after-free condition that was observed with nvme-tcp. The race condition may happen in the following scenario: 1. driver executes its reset_ctrl_work 2. -> nvme_stop_ctrl - flushes ctrl async_event_work 3. ctrl sends AEN which is received by the host, which in turn schedules AEN handling 4. teardown admin queue (which releases the queue socket) 5. AEN processed, submits another AER, calling the driver to submit 6. driver attempts to send the cmd ==> use-after-free In order to fix that, add ctrl state check to validate the ctrl is actually able to accept the AER submission. This addresses the above race in controller resets because the driver during teardown should: 1. change ctrl state to RESETTING 2. flush async_event_work (as well as other async work elements) So after 1,2, any other AER command will find the ctrl state to be RESETTING and bail out without submitting the AER. Signed-off-by: Sagi Grimberg <[email protected]>
2022-02-01Merge branch '1GbE' of ↵Jakub Kicinski3-19/+44
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2022-02-01 This series contains updates to e1000e driver only. Sasha removes CSME handshake with TGL platform as this is not supported and is causing hardware unit hangs to be reported. * '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: e1000e: Handshake with CSME starts from ADL platforms e1000e: Separate ADP board type from TGP ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-02-01net/mlx5e: Avoid field-overflowing memcpy()Kees Cook2-4/+6
In preparation for FORTIFY_SOURCE performing compile-time and run-time field bounds checking for memcpy(), memmove(), and memset(), avoid intentionally writing across neighboring fields. Use flexible arrays instead of zero-element arrays (which look like they are always overflowing) and split the cross-field memcpy() into two halves that can be appropriately bounds-checked by the compiler. We were doing: #define ETH_HLEN 14 #define VLAN_HLEN 4 ... #define MLX5E_XDP_MIN_INLINE (ETH_HLEN + VLAN_HLEN) ... struct mlx5e_tx_wqe *wqe = mlx5_wq_cyc_get_wqe(wq, pi); ... struct mlx5_wqe_eth_seg *eseg = &wqe->eth; struct mlx5_wqe_data_seg *dseg = wqe->data; ... memcpy(eseg->inline_hdr.start, xdptxd->data, MLX5E_XDP_MIN_INLINE); target is wqe->eth.inline_hdr.start (which the compiler sees as being 2 bytes in size), but copying 18, intending to write across start (really vlan_tci, 2 bytes). The remaining 16 bytes get written into wqe->data[0], covering byte_count (4 bytes), lkey (4 bytes), and addr (8 bytes). struct mlx5e_tx_wqe { struct mlx5_wqe_ctrl_seg ctrl; /* 0 16 */ struct mlx5_wqe_eth_seg eth; /* 16 16 */ struct mlx5_wqe_data_seg data[]; /* 32 0 */ /* size: 32, cachelines: 1, members: 3 */ /* last cacheline: 32 bytes */ }; struct mlx5_wqe_eth_seg { u8 swp_outer_l4_offset; /* 0 1 */ u8 swp_outer_l3_offset; /* 1 1 */ u8 swp_inner_l4_offset; /* 2 1 */ u8 swp_inner_l3_offset; /* 3 1 */ u8 cs_flags; /* 4 1 */ u8 swp_flags; /* 5 1 */ __be16 mss; /* 6 2 */ __be32 flow_table_metadata; /* 8 4 */ union { struct { __be16 sz; /* 12 2 */ u8 start[2]; /* 14 2 */ } inline_hdr; /* 12 4 */ struct { __be16 type; /* 12 2 */ __be16 vlan_tci; /* 14 2 */ } insert; /* 12 4 */ __be32 trailer; /* 12 4 */ }; /* 12 4 */ /* size: 16, cachelines: 1, members: 9 */ /* last cacheline: 16 bytes */ }; struct mlx5_wqe_data_seg { __be32 byte_count; /* 0 4 */ __be32 lkey; /* 4 4 */ __be64 addr; /* 8 8 */ /* size: 16, cachelines: 1, members: 3 */ /* last cacheline: 16 bytes */ }; So, split the memcpy() so the compiler can reason about the buffer sizes. "pahole" shows no size nor member offset changes to struct mlx5e_tx_wqe nor struct mlx5e_umr_wqe. "objdump -d" shows no meaningful object code changes (i.e. only source line number induced differences and optimizations). Fixes: b5503b994ed5 ("net/mlx5e: XDP TX forwarding support") Signed-off-by: Kees Cook <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2022-02-01net/mlx5e: Use struct_group() for memcpy() regionKees Cook2-3/+5
In preparation for FORTIFY_SOURCE performing compile-time and run-time field bounds checking for memcpy(), memmove(), and memset(), avoid intentionally writing across neighboring fields. Use struct_group() in struct vlan_ethhdr around members h_dest and h_source, so they can be referenced together. This will allow memcpy() and sizeof() to more easily reason about sizes, improve readability, and avoid future warnings about writing beyond the end of h_dest. "pahole" shows no size nor member offset changes to struct vlan_ethhdr. "objdump -d" shows no object code changes. Fixes: 34802a42b352 ("net/mlx5e: Do not modify the TX SKB") Signed-off-by: Kees Cook <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2022-02-01net/mlx5e: Avoid implicit modify hdr for decap drop ruleRoi Dayan1-1/+2
Currently the driver adds implicit modify hdr action for decap rules on tunnel devices if the port is an ovs port. This is also done if the action is drop and makes the modify hdr redundant and also the FW doesn't support it and will generate a syndrome. kernel: mlx5_core 0000:08:00.0: mlx5_cmd_check:777:(pid 102063): SET_FLOW_TABLE_ENTRY(0x936) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0x8708c3) Fix it by adding the implicit modify hdr only for fwd actions. Fixes: b16eb3c81fe2 ("net/mlx5: Support internal port as decap route device") Fixes: 077cdda764c7 ("net/mlx5e: TC, Fix memory leak with rules with internal port") Signed-off-by: Roi Dayan <[email protected]> Reviewed-by: Ariel Levkovich <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2022-02-01net/mlx5e: IPsec: Fix tunnel mode crypto offload for non TCP/UDP trafficRaed Salem1-2/+11
IPsec Tunnel mode crypto offload software parser (SWP) setting in data path currently always set the inner L4 offset regardless of the encapsulated L4 header type and whether it exists in the first place, this breaks non TCP/UDP traffic as such. Set the SWP inner L4 offset only when the IPsec tunnel encapsulated L4 header protocol is TCP/UDP. While at it fix inner ip protocol read for setting MLX5_ETH_WQE_SWP_INNER_L4_UDP flag to address the case where the ip header protocol is IPv6. Fixes: f1267798c980 ("net/mlx5: Fix checksum issue of VXLAN and IPsec crypto offload") Signed-off-by: Raed Salem <[email protected]> Reviewed-by: Maor Dickman <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2022-02-01net/mlx5e: IPsec: Fix crypto offload for non TCP/UDP encapsulated trafficRaed Salem1-3/+6
IPsec crypto offload always set the ethernet segment checksum flags with the inner L4 header checksum flag enabled for encapsulated IPsec offloaded packet regardless of the encapsulated L4 header type, and even if it doesn't exists in the first place, this breaks non TCP/UDP traffic as such. Set the inner L4 checksum flag only when the encapsulated L4 header protocol is TCP/UDP using software parser swp_inner_l4_offset field as indication. Fixes: 5cfb540ef27b ("net/mlx5e: Set IPsec WAs only in IP's non checksum partial case.") Signed-off-by: Raed Salem <[email protected]> Reviewed-by: Maor Dickman <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2022-02-01net/mlx5e: Don't treat small ceil values as unlimited in HTB offloadMaxim Mikityanskiy1-1/+2
The hardware spec defines max_average_bw == 0 as "unlimited bandwidth". max_average_bw is calculated as `ceil / BYTES_IN_MBIT`, which can become 0 when ceil is small, leading to an undesired effect of having no bandwidth limit. This commit fixes it by rounding up small values of ceil to 1 Mbit/s. Fixes: 214baf22870c ("net/mlx5e: Support HTB offload") Signed-off-by: Maxim Mikityanskiy <[email protected]> Reviewed-by: Tariq Toukan <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.