aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2024-06-19ASoC: rt1318: Add RT1318 audio amplifier driverJack Yu5-0/+1719
This is the initial i2s-based amplifier driver for rt1318. Signed-off-by: Jack Yu <[email protected]> Link: https://msgid.link/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-06-19ASoC: dt-bindings: ak4619: Add initial DT bindingKuninori Morimoto1-0/+62
Add Asahi Kasei ak4619 audio codec bindings. Signed-off-by: Kuninori Morimoto <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Link: https://msgid.link/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-06-19ASoC: Add ak4619 codec supportKhanh Le3-0/+919
Add support for the Asahi Kasei AK4619 audio codec. [Kuninori cleanuped and adjusted to upstream code] Signed-off-by: Khanh Le <[email protected]> Signed-off-by: Kuninori Morimoto <[email protected]> Link: https://msgid.link/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-06-19ASoC: cs35l56: Accept values greater than 0 as IRQ numbersSimon Trimmer1-1/+1
IRQ lookup functions such as those in ACPI can return error values when an IRQ is not defined. The i2c core driver converts the error codes to a value of 0 and the SPI bus driver passes them unaltered to client device drivers. The cs35l56 driver should only accept positive non-zero values as IRQ numbers. Signed-off-by: Simon Trimmer <[email protected]> Fixes: 8a731fd37f8b ("ASoC: cs35l56: Move utility functions to shared file") Link: https://msgid.link/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-06-18ASoC: Intel: soc-acpi: mtl: fix speaker no sound on Dell SKU 0C64Shuming Fan1-1/+1
Dell SKU 0C64 has a single rt1318 amplifier. The prefix name of control still needs to be set rt1318-1 corresponding to UCM config. Signed-off-by: Shuming Fan <[email protected]> Reviewed-by: Bard Liao <[email protected]> Link: https://msgid.link/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-06-18ASoC: codecs: wcd939x: Drop unused num_ports fieldKrzysztof Kozlowski1-1/+0
The driver does not use few 'num_ports' in 'struct wcd939x_sdw_priv'. Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Neil Armstrong <[email protected]> Link: https://msgid.link/r/20240612-asoc-wcd9xxx-wide-cleanups-v1-23-0d15885b2a06@linaro.org Signed-off-by: Mark Brown <[email protected]>
2024-06-18ASoC: codecs: wcd939x: Drop unused RX/TX direction enumKrzysztof Kozlowski1-5/+0
The enum with RX/TX soundwire direction is not used. Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Neil Armstrong <[email protected]> Link: https://msgid.link/r/20240612-asoc-wcd9xxx-wide-cleanups-v1-22-0d15885b2a06@linaro.org Signed-off-by: Mark Brown <[email protected]>
2024-06-18ASoC: codecs: wcd939x: Constify wcd939x_sdw_ch_infoKrzysztof Kozlowski3-4/+4
Driver does not modify static wcd939x_sdw_ch_info array, so it can be made const for code safety. Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Neil Armstrong <[email protected]> Link: https://msgid.link/r/20240612-asoc-wcd9xxx-wide-cleanups-v1-21-0d15885b2a06@linaro.org Signed-off-by: Mark Brown <[email protected]>
2024-06-18ASoC: codecs: wcd939x: Constify static dataKrzysztof Kozlowski1-3/+3
Driver does not modify few static data (MBHC reg fields, IRQ chip), so make them const for code safety. Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Neil Armstrong <[email protected]> Link: https://msgid.link/r/20240612-asoc-wcd9xxx-wide-cleanups-v1-20-0d15885b2a06@linaro.org Signed-off-by: Mark Brown <[email protected]>
2024-06-18ASoC: codecs: wcd938x: Drop unused num_ports fieldKrzysztof Kozlowski1-1/+0
The driver does not use few 'num_ports' in 'struct wcd938x_sdw_priv'. Signed-off-by: Krzysztof Kozlowski <[email protected]> Link: https://msgid.link/r/20240612-asoc-wcd9xxx-wide-cleanups-v1-19-0d15885b2a06@linaro.org Signed-off-by: Mark Brown <[email protected]>
2024-06-18ASoC: codecs: wcd938x: Drop unused RX/TX direction enumKrzysztof Kozlowski1-4/+0
The enum with RX/TX soundwire direction is not used. Signed-off-by: Krzysztof Kozlowski <[email protected]> Link: https://msgid.link/r/20240612-asoc-wcd9xxx-wide-cleanups-v1-18-0d15885b2a06@linaro.org Signed-off-by: Mark Brown <[email protected]>
2024-06-18ASoC: codecs: wcd938x: Constify wcd938x_sdw_ch_infoKrzysztof Kozlowski3-4/+4
Driver does not modify static wcd938x_sdw_ch_info array, so it can be made const for code safety. Signed-off-by: Krzysztof Kozlowski <[email protected]> Link: https://msgid.link/r/20240612-asoc-wcd9xxx-wide-cleanups-v1-17-0d15885b2a06@linaro.org Signed-off-by: Mark Brown <[email protected]>
2024-06-18ASoC: codecs: wcd938x: Constify static dataKrzysztof Kozlowski1-2/+2
Driver does not modify few static data (MBHC reg fields, IRQ chip), so make them const for code safety. Signed-off-by: Krzysztof Kozlowski <[email protected]> Link: https://msgid.link/r/20240612-asoc-wcd9xxx-wide-cleanups-v1-16-0d15885b2a06@linaro.org Signed-off-by: Mark Brown <[email protected]>
2024-06-18ASoC: codecs: wcd937x: Drop unused chipid memberKrzysztof Kozlowski1-7/+6
The driver stores the read chipid in 'struct wcd937x_priv' but never needs it after. Signed-off-by: Krzysztof Kozlowski <[email protected]> Link: https://msgid.link/r/20240612-asoc-wcd9xxx-wide-cleanups-v1-15-0d15885b2a06@linaro.org Signed-off-by: Mark Brown <[email protected]>
2024-06-18ASoC: codecs: wcd937x: Drop unused state container fieldsKrzysztof Kozlowski2-5/+0
The driver does not use few 'struct wcd937x_priv' and 'struct wcd937x_sdw_priv' members, so just drop them for smaller code. Signed-off-by: Krzysztof Kozlowski <[email protected]> Link: https://msgid.link/r/20240612-asoc-wcd9xxx-wide-cleanups-v1-14-0d15885b2a06@linaro.org Signed-off-by: Mark Brown <[email protected]>
2024-06-18ASoC: codecs: wcd937x: Drop unused enums, defines and typesKrzysztof Kozlowski1-28/+0
Few declarations (defines, struct codec_port_info, enums) are not used and can be safely dropped. Signed-off-by: Krzysztof Kozlowski <[email protected]> Link: https://msgid.link/r/20240612-asoc-wcd9xxx-wide-cleanups-v1-13-0d15885b2a06@linaro.org Signed-off-by: Mark Brown <[email protected]>
2024-06-18ASoC: codecs: wcd937x: Constify wcd937x_sdw_ch_infoKrzysztof Kozlowski3-4/+4
Driver does not modify static wcd937x_sdw_ch_info array, so it can be made const for code safety. Signed-off-by: Krzysztof Kozlowski <[email protected]> Link: https://msgid.link/r/20240612-asoc-wcd9xxx-wide-cleanups-v1-12-0d15885b2a06@linaro.org Signed-off-by: Mark Brown <[email protected]>
2024-06-18ASoC: codecs: wcd937x: Constify static dataKrzysztof Kozlowski1-3/+3
Driver does not modify few static data (MBHC reg fields, IRQ chip), so make them const for code safety. Signed-off-by: Krzysztof Kozlowski <[email protected]> Link: https://msgid.link/r/20240612-asoc-wcd9xxx-wide-cleanups-v1-11-0d15885b2a06@linaro.org Signed-off-by: Mark Brown <[email protected]>
2024-06-18ASoC: codecs: wcd934x: Handle nicer probe deferral and simplify with ↵Krzysztof Kozlowski1-11/+5
dev_err_probe() wcd934x_codec_parse_data() function is called only from probe(), so printing errors on resource acquisition is discouraged, because it can pollute dmesg in case of probe deferral. The actual deferral is here unlikely, but still the code is a bit simpler with dev_err_probe(). Signed-off-by: Krzysztof Kozlowski <[email protected]> Link: https://msgid.link/r/20240612-asoc-wcd9xxx-wide-cleanups-v1-10-0d15885b2a06@linaro.org Signed-off-by: Mark Brown <[email protected]>
2024-06-18ASoC: codecs: wcd934x: Drop unused mic bias voltage fieldsKrzysztof Kozlowski1-10/+5
Driver stores the voltage of mic bias in fields in state container structure, but actually never reads them - except for the mic2 bias (micb2_mv field). Drop the fields from the structure so the code will be a bit simpler. Signed-off-by: Krzysztof Kozlowski <[email protected]> Link: https://msgid.link/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-06-18ASoC: codecs: wcd934x: Constify static dataKrzysztof Kozlowski1-3/+3
Driver does not modify few static data (arrays with sample rates, MBHC reg fields, regmap config), so make them const for code safety. Signed-off-by: Krzysztof Kozlowski <[email protected]> Link: https://msgid.link/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-06-18ASoC: codecs: wcd934x: Drop unused interp path enumKrzysztof Kozlowski1-5/+0
The enum with inter path is not used. Signed-off-by: Krzysztof Kozlowski <[email protected]> Link: https://msgid.link/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-06-18ASoC: codecs: wcd9335: Drop unused dmic rate handlingKrzysztof Kozlowski1-49/+3
Driver was prepared to adjust DMIC microphone parameters according to DMIC clock rate which is read from platform data or Devicetree. The latter part never happened, so the code is always called with dmic_clk_rate=0, prints error and uses default/fallback values. All this part can be simplified by dropping dead parts of code. Signed-off-by: Krzysztof Kozlowski <[email protected]> Link: https://msgid.link/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-06-18ASoC: codecs: wcd9335: Drop unneeded error messageKrzysztof Kozlowski1-4/+0
Error-level should not be used as debugging. The code (function wcd9335_get_dmic_clk_val()) will always be called with same parameters, so this is not really useful debug anyway, so drop it. Signed-off-by: Krzysztof Kozlowski <[email protected]> Link: https://msgid.link/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-06-18ASoC: codecs: wcd9335: Handle nicer probe deferral and simplify with ↵Krzysztof Kozlowski1-19/+9
dev_err_probe() wcd9335_parse_dt() function is called only from probe(), so printing errors on resource acquisition is discouraged, because it can pollute dmesg. Use dev_err_probe() to fix this and also make the code a bit simpler. Signed-off-by: Krzysztof Kozlowski <[email protected]> Link: https://msgid.link/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-06-18ASoC: codecs: wcd9335: Constify static dataKrzysztof Kozlowski1-5/+5
Driver does not modify few static data (arrays with sample rates, interrupt description, regmap config), so make them const for code safety. Signed-off-by: Krzysztof Kozlowski <[email protected]> Link: https://msgid.link/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-06-18ASoC: codecs: wcd9335: Drop unused state container fieldsKrzysztof Kozlowski1-4/+0
The driver does not use few 'struct wcd9335_codec' members, so just drop them for smaller code. Signed-off-by: Krzysztof Kozlowski <[email protected]> Link: https://msgid.link/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-06-18ASoC: codecs: wcd-mbhc: Constify passed MBHC reg fieldsKrzysztof Kozlowski2-4/+4
The wcd-mbhc-v2 helper code/module does not modify passed array of registry fields, thus it can be made const for code safety. It will also allow individual drivers to allocate the array in rodata. Signed-off-by: Krzysztof Kozlowski <[email protected]> Link: https://msgid.link/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-06-18ASoc: tas2781: Enable RCA-based playback without DSP firmware downloadShenghao Ding3-20/+48
In only loading RCA (Reconfigurable Architecture) binary case, no DSP program will be working inside tas2563/tas2781, that is dsp-bypass mode, do not support speaker protection, or audio acoustic algorithms in this mode. Fixes: ef3bcde75d06 ("ASoC: tas2781: Add tas2781 driver") Signed-off-by: Shenghao Ding <[email protected]> Reviewed-by: Pierre-Louis Bossart <[email protected]> Link: https://msgid.link/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-06-18ASoC: dt-bindings: audio-graph-card2: add support for aux devicesKuninori Morimoto1-0/+5
Add device tree property to define auxiliary devices to be added to Audio Graph Card which is already supported on Simle Card. Signed-off-by: Kuninori Morimoto <[email protected]> Link: https://msgid.link/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-06-18ASoC: nau8822: add MCLK supportAndrejs Cainikovs2-4/+45
This change adds MCLK clock handling directly within driver. When used in combination with simple-audio-card, and mclk-fs is set, simple-audio-card will change MCLK frequency before configuring PLL. In some cases, however, MCLK reference clock should be static (see [1]), which means it needs to be moved away from simple-audio-card. [1]: https://lore.kernel.org/all/[email protected]/ Signed-off-by: Andrejs Cainikovs <[email protected]> Link: https://msgid.link/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-06-18ASoC: nau8822: set NAU8822_REFIMP_80K only onceAndrejs Cainikovs1-0/+2
Following bias state machine logic this bit is set twice before playback. This change makes sure this bit set is set only once. Signed-off-by: Andrejs Cainikovs <[email protected]> Suggested-by: Emanuele Ghidoli <[email protected]> Link: https://msgid.link/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-06-18ASoC: nau8822: move nau8822_set_dai_sysclk()Andrejs Cainikovs1-14/+14
Next commit in series makes a change which calls nau8822_set_pll() from nau8822_set_dai_sysclk(). Moving latter after the former would avoid a forward declaration, and this is exactly what this change does. Signed-off-by: Andrejs Cainikovs <[email protected]> Link: https://msgid.link/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-06-18ASoC: tlv320adc3xxx: Add support for using MICBIAS pins as GPORicard Wanderlof1-21/+84
Add boolean ti,micbias1-gpo and ti,micbias2-gpo devicetree properties. When set, the respective MICBIAS pins can be used as general purpose outputs controlled via the GPIO framework, in addition to the two configurable GPIO pins. This is useful in applications where the MICBIAS functionality is not required, but it is useful to have a couple of extra GPIO pins. The voltage on the respective MICBIAS pin in the active state is governed by the ti,micbias1-vg and ti,micbias2-vg properties, respectively (same properties as when the pins are used as MICBIAS pins). Signed-off-by: Ricard Wanderlof <[email protected]> Link: https://msgid.link/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-06-18ASoC: dt-bindings: tlv320adc3xxx: Add MICBIAS-as-GPO propertiesRicard Wanderlof1-0/+24
Add properties for configuring the MICBIAS pins as general purpose outputs, with some limitations: The voltage on the pin when activated may be set using another property to 2.0 V, 2.5 V or AVDD. When deactivated the pin will float. Signed-off-by: Ricard Wanderlof <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Link: https://msgid.link/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-06-18ASoC: qcom: x1e80100: Add USB DisplayPort plug supportKrzysztof Kozlowski1-0/+20
Add support for handling jack events of USB (DisplayPort). Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Srinivas Kandagatla <[email protected]> Tested-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Tested-by: Dmitry Baryshkov <[email protected]> # X13s Link: https://msgid.link/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-06-18ASoC: qcom: sc8280xp: add Display port JackSrinivas Kandagatla1-0/+15
Add support for Display Port Jack events. Signed-off-by: Srinivas Kandagatla <[email protected]> Tested-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Tested-by: Dmitry Baryshkov <[email protected]> # X13s Link: https://msgid.link/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-06-18ASoC: qcom: common: add Display port Jack functionSrinivas Kandagatla2-0/+38
Add a common function to add Display port jack. Signed-off-by: Srinivas Kandagatla <[email protected]> Tested-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Tested-by: Dmitry Baryshkov <[email protected]> # X13s Link: https://msgid.link/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-06-18ASoC: qcom: q6dsp: parse Display port tokensSrinivas Kandagatla1-0/+26
Signed-off-by: Srinivas Kandagatla <[email protected]> Tested-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Tested-by: Dmitry Baryshkov <[email protected]> # X13s Link: https://msgid.link/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-06-18ASoC: Constify return of snd_soc_dai_get_pcm_stream()Krzysztof Kozlowski4-17/+17
Returned 'struct snd_soc_pcm_stream' by snd_soc_dai_get_pcm_stream() is not modified by the users, so it can be changed as pointer to const. This is a necessary step towards making the 'dai->driver' a pointer to const. Signed-off-by: Krzysztof Kozlowski <[email protected]> Link: https://msgid.link/r/20240617-n-asoc-const-auto-selectable-formats-v1-5-8004f346ee38@linaro.org Signed-off-by: Mark Brown <[email protected]>
2024-06-18ASoC: Constify DAI passed to get_channel_mapKrzysztof Kozlowski8-10/+10
get_channel_map() is supposed to obtain map of channels without modifying the state of the given DAI, so make the pointer to 'struct snd_soc_dai' as pointing to const. Signed-off-by: Krzysztof Kozlowski <[email protected]> Link: https://msgid.link/r/20240617-n-asoc-const-auto-selectable-formats-v1-4-8004f346ee38@linaro.org Signed-off-by: Mark Brown <[email protected]>
2024-06-18ASoC: Constify passed data to core functionKrzysztof Kozlowski5-26/+29
Several ASoC functions receive pointers to data which is not modified, e.g. pointers to 'snd_soc_dai', 'snd_soc_pcm_runtime', 'snd_pcm_hw_params' and 'snd_soc_dai_link'. All these pointers can be made as a pointer to const. This makes code safer, serves as clear annotation of function's intentions (no ownership passed to the function, no modifications) and allows putting pointed structures in rodata (if ever applicable). Signed-off-by: Krzysztof Kozlowski <[email protected]> Link: https://msgid.link/r/20240617-n-asoc-const-auto-selectable-formats-v1-3-8004f346ee38@linaro.org Signed-off-by: Mark Brown <[email protected]>
2024-06-18ASoC: Constify of_phandle_args in snd_soc_dai_link_componentKrzysztof Kozlowski1-1/+1
ASoC core code does not modify contents of 'of_phandle_args' in 'struct snd_soc_dai_link_component', so the pointer can be made as a pointer to const. This makes code safer, serves as clear annotation of core's intentions and allows putting pointed structures in rodata (if ever applicable). Signed-off-by: Krzysztof Kozlowski <[email protected]> Link: https://msgid.link/r/20240617-n-asoc-const-auto-selectable-formats-v1-2-8004f346ee38@linaro.org Signed-off-by: Mark Brown <[email protected]>
2024-06-18ASoC: Constify of_phandle_args in snd_soc_dai_driverKrzysztof Kozlowski1-1/+1
ASoC core code does not modify contents of 'of_phandle_args' in 'struct snd_soc_dai_driver', so the pointer can be made as a pointer to const. This makes code safer, serves as clear annotation of core's intentions and allows putting pointed structures in rodata (if ever applicable). Signed-off-by: Krzysztof Kozlowski <[email protected]> Link: https://msgid.link/r/20240617-n-asoc-const-auto-selectable-formats-v1-1-8004f346ee38@linaro.org Signed-off-by: Mark Brown <[email protected]>
2024-06-17ASoC: Constify DAI ops auto_selectable_formatsKrzysztof Kozlowski11-11/+11
The static arrays passed as 'auto_selectable_formats' are not modified by the drivers nor by the core code, so make it const for code safety. Signed-off-by: Krzysztof Kozlowski <[email protected]> Acked-by: Herve Codina <[email protected]> Link: https://msgid.link/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-06-17ASoC: soc-dai.h: Constify DAI ops auto_selectable_formatsKrzysztof Kozlowski1-1/+1
The core ASoC code does not modify contents of the 'auto_selectable_formats' array passed in 'struct snd_soc_dai_ops', so make it const for code safety. Reviewed-by: Herve Codina <[email protected]> Signed-off-by: Krzysztof Kozlowski <[email protected]> Link: https://msgid.link/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-06-17ASoC: audio-graph-card2: add support for aux devicesKuninori Morimoto1-0/+4
Add device tree property to define auxiliary devices to be added to Audio Graph Card which is already supported on Simle Card. Signed-off-by: Kuninori Morimoto <[email protected]> Link: https://msgid.link/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-06-17ASoC: SOF: mediatek: Constify struct mtk_adsp_ipc_opsChristophe JAILLET3-3/+3
'struct mtk_adsp_ipc_ops' is not modified in these drivers. Constifying this structure moves some data to a read-only section, so increase overall security. In order to do it, "struct mtk_adsp_ipc" also needs to be adjusted to this new const qualifier. On a x86_64, with allmodconfig: Before: ====== text data bss dec hex filename 15533 2383 0 17916 45fc sound/soc/sof/mediatek/mt8195/mt8195.o After: ===== text data bss dec hex filename 15557 2367 0 17924 4604 sound/soc/sof/mediatek/mt8195/mt8195.o Signed-off-by: Christophe JAILLET <[email protected]> Link: https://msgid.link/r/a45d6b2b5ec040ea0fc78fca662c2dca3f13a49f.1718312321.git.christophe.jaillet@wanadoo.fr Signed-off-by: Mark Brown <[email protected]>
2024-06-17ASoC: dt-bindings: realtek,rt5514: Convert to dtschemaAnimesh Agarwal2-37/+70
Convert the RT5514 audio CODEC bindings to DT Schema. Make bindings complete by adding 'spi-max-frequency', 'wakeup-source' properties. Signed-off-by: Animesh Agarwal <[email protected]> Cc: Daniel Baluta <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Link: https://msgid.link/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-06-17ASoC: dt-bindings: realtek,rt5631: Convert to dtschemaAnimesh Agarwal2-48/+67
Convert the ALC5631/RT5631 audio CODEC bindings to DT Schema. Signed-off-by: Animesh Agarwal <[email protected]> Cc: Daniel Baluta <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Link: https://msgid.link/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.