aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2017-08-21KVM: s390: sthyi: fix sthyi inline assemblyHeiko Carstens1-1/+1
The sthyi inline assembly misses register r3 within the clobber list. The sthyi instruction will always write a return code to register "R2+1", which in this case would be r3. Due to that we may have register corruption and see host crashes or data corruption depending on how gcc decided to allocate and use registers during compile time. Fixes: 95ca2cb57985 ("KVM: s390: Add sthyi emulation") Cc: <[email protected]> # 4.8+ Reviewed-by: Janosch Frank <[email protected]> Signed-off-by: Heiko Carstens <[email protected]> Reviewed-by: David Hildenbrand <[email protected]> Reviewed-by: Cornelia Huck <[email protected]> Signed-off-by: Christian Borntraeger <[email protected]>
2017-08-21mmc: block: prevent propagating R1_OUT_OF_RANGE for open-ending modeShawn Lin1-6/+43
We to some extent should tolerate R1_OUT_OF_RANGE for open-ending mode as it is expected behaviour and most of the backup partition tables should be located near some of the last blocks which will always make open-ending read exceed the capacity of cards. Fixes: 9820a5b11101 ("mmc: core: for data errors, take response of stop cmd into account") Fixes: a04e6bae9e6f ("mmc: core: check also R1 response for stop commands") Signed-off-by: Shawn Lin <[email protected]> Reviewed-by: Wolfram Sang <[email protected]> Tested-by: Shawn Guo <[email protected]> Signed-off-by: Ulf Hansson <[email protected]>
2017-08-21rtc: ds1307: fix regmap configHeiner Kallweit1-1/+0
Current max_register setting breaks reading nvram on certain chips and also reading the standard registers on RX8130 where register map starts at 0x10. Signed-off-by: Heiner Kallweit <[email protected]> Fixes: 11e5890b5342 "rtc: ds1307: convert driver to regmap" Signed-off-by: Alexandre Belloni <[email protected]>
2017-08-21drm/i915: Clear lost context-switch interrupts across resetChris Wilson1-1/+22
During a global reset, we disable the irq. As we disable the irq, the hardware may be raising a GT interrupt that we then ignore, leaving it pending in the GTIIR. After the reset, we then re-enable the irq, triggering the pending interrupt. However, that interrupt was for the stale state from before the reset, and the contents of the CSB buffer are now invalid. v2: Add a comment to make it clear that the double clear is purely my paranoia. Reported-by: "Dong, Chuanxiao" <[email protected]> Fixes: 821ed7df6e2a ("drm/i915: Update reset path to fix incomplete requests") Signed-off-by: Chris Wilson <[email protected]> Cc: "Dong, Chuanxiao" <[email protected]> Cc: Tvrtko Ursulin <[email protected]> Cc: Michal Winiarski <[email protected]> Cc: Michel Thierry <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Reviewed-by: Michel Thierry <[email protected]> (cherry picked from commit 64f09f00caf0a7cb40a8c0b85789bacba0f51d9e) Signed-off-by: Jani Nikula <[email protected]>
2017-08-21drm/i915/bxt: use NULL for GPIO connection IDAndy Shevchenko1-1/+1
The commit 213e08ad60ba ("drm/i915/bxt: add bxt dsi gpio element support") enables GPIO support for Broxton based platforms. While using that API we might get into troubles in the future, because we can't rely on label name in the driver since vendor firmware might provide any GPIO pin there, e.g. "reset", and even mark it in _DSD (in which case the request will fail). To avoid inconsistency and potential issues we have two options: a) generate GPIO ACPI mapping table and supply it via acpi_dev_add_driver_gpios(), or b) just pass NULL as connection ID. The b) approach is much simpler and would work since the driver relies on GPIO indices only. Moreover, the _CRS fallback mechanism, when requesting GPIO, has been made stricter, and supplying non-NULL connection ID when neither _DSD, nor GPIO ACPI mapping is present, is making request fail. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101921 Fixes: f10e4bf6632b ("gpio: acpi: Even more tighten up ACPI GPIO lookups") Cc: Mika Kahola <[email protected]> Cc: Jani Nikula <[email protected]> Tested-by: Mika Kahola <[email protected]> Signed-off-by: Andy Shevchenko <[email protected]> Signed-off-by: Jani Nikula <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit cd55a1fbd21a820b7dd85a208b3170aa0b06adfa) Signed-off-by: Jani Nikula <[email protected]>
2017-08-21soc: ti: knav: Add a NULL pointer check for kdev in knav_pool_createKeerthy1-0/+3
knav_pool_create is an exported function. In the event of a call before knav_queue_probe, we encounter a NULL pointer dereference in the following line. Hence return -EPROBE_DEFER to the caller till the kdev pointer is non-NULL. Signed-off-by: Keerthy <[email protected]> Acked-by: Santosh Shilimkar <[email protected]> Signed-off-by: Arnd Bergmann <[email protected]>
2017-08-20ipv6: repair fib6 tree in failure caseWei Wang1-13/+11
In fib6_add(), it is possible that fib6_add_1() picks an intermediate node and sets the node's fn->leaf to NULL in order to add this new route. However, if fib6_add_rt2node() fails to add the new route for some reason, fn->leaf will be left as NULL and could potentially cause crash when fn->leaf is accessed in fib6_locate(). This patch makes sure fib6_repair_tree() is called to properly repair fn->leaf in the above failure case. Here is the syzkaller reported general protection fault in fib6_locate: kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN Modules linked in: CPU: 0 PID: 40937 Comm: syz-executor3 Not tainted Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 task: ffff8801d7d64100 ti: ffff8801d01a0000 task.ti: ffff8801d01a0000 RIP: 0010:[<ffffffff82a3e0e1>] [<ffffffff82a3e0e1>] __ipv6_prefix_equal64_half include/net/ipv6.h:475 [inline] RIP: 0010:[<ffffffff82a3e0e1>] [<ffffffff82a3e0e1>] ipv6_prefix_equal include/net/ipv6.h:492 [inline] RIP: 0010:[<ffffffff82a3e0e1>] [<ffffffff82a3e0e1>] fib6_locate_1 net/ipv6/ip6_fib.c:1210 [inline] RIP: 0010:[<ffffffff82a3e0e1>] [<ffffffff82a3e0e1>] fib6_locate+0x281/0x3c0 net/ipv6/ip6_fib.c:1233 RSP: 0018:ffff8801d01a36a8 EFLAGS: 00010202 RAX: 0000000000000020 RBX: ffff8801bc790e00 RCX: ffffc90002983000 RDX: 0000000000001219 RSI: ffff8801d01a37a0 RDI: 0000000000000100 RBP: ffff8801d01a36f0 R08: 00000000000000ff R09: 0000000000000000 R10: 0000000000000003 R11: 0000000000000000 R12: 0000000000000001 R13: dffffc0000000000 R14: ffff8801d01a37a0 R15: 0000000000000000 FS: 00007f6afd68c700(0000) GS:ffff8801db400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000004c6340 CR3: 00000000ba41f000 CR4: 00000000001426f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Stack: ffff8801d01a37a8 ffff8801d01a3780 ffffed003a0346f5 0000000c82a23ea0 ffff8800b7bd7700 ffff8801d01a3780 ffff8800b6a1c940 ffffffff82a23ea0 ffff8801d01a3920 ffff8801d01a3748 ffffffff82a223d6 ffff8801d7d64988 Call Trace: [<ffffffff82a223d6>] ip6_route_del+0x106/0x570 net/ipv6/route.c:2109 [<ffffffff82a23f9d>] inet6_rtm_delroute+0xfd/0x100 net/ipv6/route.c:3075 [<ffffffff82621359>] rtnetlink_rcv_msg+0x549/0x7a0 net/core/rtnetlink.c:3450 [<ffffffff8274c1d1>] netlink_rcv_skb+0x141/0x370 net/netlink/af_netlink.c:2281 [<ffffffff82613ddf>] rtnetlink_rcv+0x2f/0x40 net/core/rtnetlink.c:3456 [<ffffffff8274ad38>] netlink_unicast_kernel net/netlink/af_netlink.c:1206 [inline] [<ffffffff8274ad38>] netlink_unicast+0x518/0x750 net/netlink/af_netlink.c:1232 [<ffffffff8274b83e>] netlink_sendmsg+0x8ce/0xc30 net/netlink/af_netlink.c:1778 [<ffffffff82564aff>] sock_sendmsg_nosec net/socket.c:609 [inline] [<ffffffff82564aff>] sock_sendmsg+0xcf/0x110 net/socket.c:619 [<ffffffff82564d62>] sock_write_iter+0x222/0x3a0 net/socket.c:834 [<ffffffff8178523d>] new_sync_write+0x1dd/0x2b0 fs/read_write.c:478 [<ffffffff817853f4>] __vfs_write+0xe4/0x110 fs/read_write.c:491 [<ffffffff81786c38>] vfs_write+0x178/0x4b0 fs/read_write.c:538 [<ffffffff817892a9>] SYSC_write fs/read_write.c:585 [inline] [<ffffffff817892a9>] SyS_write+0xd9/0x1b0 fs/read_write.c:577 [<ffffffff82c71e32>] entry_SYSCALL_64_fastpath+0x12/0x17 Note: there is no "Fixes" tag as this seems to be a bug introduced very early. Signed-off-by: Wei Wang <[email protected]> Acked-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-08-20net_sched: fix order of queue length updates in qdisc_replace()Konstantin Khlebnikov1-1/+4
This important to call qdisc_tree_reduce_backlog() after changing queue length. Parent qdisc should deactivate class in ->qlen_notify() called from qdisc_tree_reduce_backlog() but this happens only if qdisc->q.qlen in zero. Missed class deactivations leads to crashes/warnings at picking packets from empty qdisc and corrupting state at reactivating this class in future. Signed-off-by: Konstantin Khlebnikov <[email protected]> Fixes: 86a7996cc8a0 ("net_sched: introduce qdisc_replace() helper") Acked-by: Cong Wang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-08-20tools lib bpf: improve warningEric Leblond1-1/+2
Signed-off-by: Eric Leblond <[email protected]> Acked-by: Daniel Borkmann <[email protected]> Acked-by: Alexei Starovoitov <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-08-20switchdev: documentation: minor typo fixesChris Packham1-2/+2
Two typos in switchdev.txt Signed-off-by: Chris Packham <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-08-20bpf, doc: also add s390x as arch to sysctl descriptionDaniel Borkmann1-0/+1
Looks like this was accidentally missed, so still add s390x as supported eBPF JIT arch to bpf_jit_enable. Fixes: 014cd0a368dc ("bpf: Update sysctl documentation to list all supported architectures") Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Alexei Starovoitov <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-08-21kbuild: Do not use hyphen in exported variable nameBen Hutchings1-2/+2
This definition in Makefile.dtbinst: export dtbinst-root ?= $(obj) should define and export dtbinst-root when handling the root dts directory, and do nothing in the subdirectories. However some shells, including dash, will not pass through environment variables whose name includes a hyphen. Usually GNU make does not use a shell to recurse, but if e.g. $(srctree) contains '~' it will use a shell here. Rename the variable to dtbinst_root. References: https://bugs.debian.org/833561 Fixes: 323a028d39cdi ("dts, kbuild: Implement support for dtb vendor subdirs") Signed-off-by: Ben Hutchings <[email protected]> Signed-off-by: Masahiro Yamada <[email protected]>
2017-08-21Makefile: add kselftest-clean to PHONY target listShuah Khan1-0/+1
kselftest-clean isn't in the PHONY target list. Add it. Signed-off-by: Shuah Khan <[email protected]> Signed-off-by: Masahiro Yamada <[email protected]>
2017-08-21Kbuild: use -fshort-wchar globallyArnd Bergmann2-4/+1
Commit 971a69db7dc0 ("Xen: don't warn about 2-byte wchar_t in efi") added the --no-wchar-size-warning to the Makefile to avoid this harmless warning: arm-linux-gnueabi-ld: warning: drivers/xen/efi.o uses 2-byte wchar_t yet the output is to use 4-byte wchar_t; use of wchar_t values across objects may fail Changing kbuild to use thin archives instead of recursive linking unfortunately brings the same warning back during the final link. The kernel does not use wchar_t string literals at this point, and xen does not use wchar_t at all (only efi_char16_t), so the flag has no effect, but as pointed out by Jan Beulich, adding a wchar_t string literal would be bad here. Since wchar_t is always defined as u16, independent of the toolchain default, always passing -fshort-wchar is correct and lets us remove the Xen specific hack along with fixing the warning. Link: https://patchwork.kernel.org/patch/9275217/ Fixes: 971a69db7dc0 ("Xen: don't warn about 2-byte wchar_t in efi") Signed-off-by: Arnd Bergmann <[email protected]> Acked-by: David Vrabel <[email protected]> Signed-off-by: Masahiro Yamada <[email protected]>
2017-08-20Linux 4.13-rc6Linus Torvalds1-1/+1
2017-08-20Sanitize 'move_pages()' permission checksLinus Torvalds1-8/+3
The 'move_paghes()' system call was introduced long long ago with the same permission checks as for sending a signal (except using CAP_SYS_NICE instead of CAP_SYS_KILL for the overriding capability). That turns out to not be a great choice - while the system call really only moves physical page allocations around (and you need other capabilities to do a lot of it), you can check the return value to map out some the virtual address choices and defeat ASLR of a binary that still shares your uid. So change the access checks to the more common 'ptrace_may_access()' model instead. This tightens the access checks for the uid, and also effectively changes the CAP_SYS_NICE check to CAP_SYS_PTRACE, but it's unlikely that anybody really _uses_ this legacy system call any more (we hav ebetter NUMA placement models these days), so I expect nobody to notice. Famous last words. Reported-by: Otto Ebeling <[email protected]> Acked-by: Eric W. Biederman <[email protected]> Cc: Willy Tarreau <[email protected]> Cc: [email protected] Signed-off-by: Linus Torvalds <[email protected]>
2017-08-20Merge tag 'fixes-for-4.13b' of ↵Greg Kroah-Hartman10-43/+103
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus Jonathan writes: Second set of IIO fixes for the 4.13 cycle. Given the late stage of this series, some more involved fixes have been held back for the upcoming merge window. The hid-sensor issue has been causing problems for a long time so it is great to have that one finally fixed! No more bug reports for the userspace guys (well about that anyway). * documentation - some warning fixes due to missing colons in kernel-doc. * adis16480 - fix accel scale factor. * bmp280 - properly initialize the device for humidity readings - without this the humidity readings may be skipped and a magic value of 0x8000 returned. * hid-sensor-strigger - fix a race with user space when powering up the sensor. * ina291 - Avoid an underflow for the sleeping time as a result of supporting the fastest rates. * st-magnetometer - Fix the status register address for hte LSM303AGR, - Remove the ihl property for LSM303AGR as the sensor doesn't support active low for the dataready line. * stm32-adc - Fix use of a common clock rate. * stm32-timer - fix the quadrature mode get routine to account for the magic 0 value. set on boot. - fix the return value of write_raw, - fix the get/set down count direction as the enum value was not being converted to the relevant bit field, - add an enable attribute to actually turn it on when in encoder mode, - missing mask when reading the trigger mode.
2017-08-20Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds19-68/+85
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: "Another pile of small fixes and updates for x86: - Plug a hole in the SMAP implementation which misses to clear AC on NMI entry - Fix the norandmaps/ADDR_NO_RANDOMIZE logic so the command line parameter works correctly again - Use the proper accessor in the startup64 code for next_early_pgt to prevent accessing of invalid addresses and faulting in the early boot code. - Prevent CPU hotplug lock recursion in the MTRR code - Unbreak CPU0 hotplugging - Rename overly long CPUID bits which got introduced in this cycle - Two commits which mark data 'const' and restrict the scope of data and functions to file scope by making them 'static'" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: Constify attribute_group structures x86/boot/64/clang: Use fixup_pointer() to access 'next_early_pgt' x86/elf: Remove the unnecessary ADDR_NO_RANDOMIZE checks x86: Fix norandmaps/ADDR_NO_RANDOMIZE x86/mtrr: Prevent CPU hotplug lock recursion x86: Mark various structures and functions as 'static' x86/cpufeature, kvm/svm: Rename (shorten) the new "virtualized VMSAVE/VMLOAD" CPUID flag x86/smpboot: Unbreak CPU0 hotplug x86/asm/64: Clear AC on NMI entries
2017-08-20Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds5-11/+12
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fixes from Thomas Gleixner: "A few small fixes for timer drivers: - Prevent infinite recursion in the arm architected timer driver with ftrace - Propagate error codes to the caller in case of failure in EM STI driver - Adjust a bogus loop iteration in the arm architected timer driver - Add a missing Kconfig dependency to the pistachio clocksource to prevent build failures - Correctly check for IS_ERR() instead of NULL in the shared timer-of code" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource/drivers/arm_arch_timer: Avoid infinite recursion when ftrace is enabled clocksource/drivers/Kconfig: Fix CLKSRC_PISTACHIO dependencies clocksource/drivers/timer-of: Checking for IS_ERR() instead of NULL clocksource/drivers/em_sti: Fix error return codes in em_sti_probe() clocksource/drivers/arm_arch_timer: Fix mem frame loop initialization
2017-08-20Input: soc_button_array - silence -ENOENT error on Dell XPS13 9365Hans de Goede1-1/+1
The Dell XPS13 9365 has an INT33D2 ACPI node with no GPIOs, causing the following error in dmesg: [ 7.172275] soc_button_array: probe of INT33D2:00 failed with error -2 This commit silences this, by returning -ENODEV when there are no GPIOs. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=196679 Signed-off-by: Hans de Goede <[email protected]> Signed-off-by: Dmitry Torokhov <[email protected]>
2017-08-20Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds3-19/+48
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Thomas Gleixner: "Two fixes for the perf subsystem: - Fix an inconsistency of RDPMC mm struct tagging across exec() which causes RDPMC to fault. - Correct the timestamp mechanics across IOC_DISABLE/ENABLE which causes incorrect timestamps and total time calculations" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/core: Fix time on IOC_ENABLE perf/x86: Fix RDPMC vs. mm_struct tracking
2017-08-20Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds12-38/+84
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Thomas Gleixner: "A pile of smallish changes all over the place: - Add a missing ISB in the GIC V1 driver - Remove an ACPI version check in the GIC V3 ITS driver - Add the missing irq_pm_shutdown function for BRCMSTB-L2 to avoid spurious wakeups - Remove the artifical limitation of ITS instances to the number of NUMA nodes which prevents utilizing the ITS hardware correctly - Prevent a infinite parsing loop in the GIC-V3 ITS/MSI code - Honour the force affinity argument in the GIC-V3 driver which is required to make perf work correctly - Correctly report allocation failures in GIC-V2/V3 to avoid using half allocated and initialized interrupts. - Fixup checks against nr_cpu_ids in the generic IPI code" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq/ipi: Fixup checks against nr_cpu_ids genirq: Restore trigger settings in irq_modify_status() MAINTAINERS: Remove Jason Cooper's irqchip git tree irqchip/gic-v3-its-platform-msi: Fix msi-parent parsing loop irqchip/gic-v3-its: Allow GIC ITS number more than MAX_NUMNODES irqchip: brcmstb-l2: Define an irq_pm_shutdown function irqchip/gic: Ensure we have an ISB between ack and ->handle_irq irqchip/gic-v3-its: Remove ACPICA version check for ACPI NUMA irqchip/gic-v3: Honor forced affinity setting irqchip/gic-v3: Report failures in gic_irq_domain_alloc irqchip/gic-v2: Report failures in gic_irq_domain_alloc irqchip/atmel-aic: Remove root argument from ->fixup() prototype irqchip/atmel-aic: Fix unbalanced refcount in aic_common_rtc_irq_fixup() irqchip/atmel-aic: Fix unbalanced of_node_put() in aic_common_irq_fixup()
2017-08-20Merge branch 'core-urgent-for-linus' of ↵Linus Torvalds5-0/+76
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull watchdog fix from Thomas Gleixner: "A fix for the hardlockup watchdog to prevent false positives with extreme Turbo-Modes which make the perf/NMI watchdog fire faster than the hrtimer which is used to verify. Slightly larger than the minimal fix, which just would increase the hrtimer frequency, but comes with extra overhead of more watchdog timer interrupts and thread wakeups for all users. With this change we restrict the overhead to the extreme Turbo-Mode systems" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: kernel/watchdog: Prevent false positives with turbo modes
2017-08-20iio: magnetometer: st_magn: remove ihl property for LSM303AGRLorenzo Bianconi1-2/+0
Remove IRQ active low support for LSM303AGR since the sensor does not support that capability for data-ready line Fixes: a9fd053b56c6 (iio: st_sensors: support active-low interrupts) Signed-off-by: Lorenzo Bianconi <[email protected]> Reviewed-by: Linus Walleij <[email protected]> Cc: <[email protected]> Signed-off-by: Jonathan Cameron <[email protected]>
2017-08-20iio: magnetometer: st_magn: fix status register address for LSM303AGRLorenzo Bianconi1-1/+1
Fixes: 97865fe41322 (iio: st_sensors: verify interrupt event to status) Signed-off-by: Lorenzo Bianconi <[email protected]> Reviewed-by: Linus Walleij <[email protected]> Cc: <[email protected]> Signed-off-by: Jonathan Cameron <[email protected]>
2017-08-20iio: hid-sensor-trigger: Fix the race with user space powering up sensorsSrinivas Pandruvada1-4/+4
It has been reported for a while that with iio-sensor-proxy service the rotation only works after one suspend/resume cycle. This required a wait in the systemd unit file to avoid race. I found a Yoga 900 where I could reproduce this. The problem scenerio is: - During sensor driver init, enable run time PM and also set a auto-suspend for 3 seconds. This result in one runtime resume. But there is a check to avoid a powerup in this sequence, but rpm is active - User space iio-sensor-proxy tries to power up the sensor. Since rpm is active it will simply return. But sensors were not actually powered up in the prior sequence, so actaully the sensors will not work - After 3 seconds the auto suspend kicks If we add a wait in systemd service file to fire iio-sensor-proxy after 3 seconds, then now everything will work as the runtime resume will actually powerup the sensor as this is a user request. To avoid this: - Remove the check to match user requested state, this will cause a brief powerup, but if the iio-sensor-proxy starts immediately it will still work as the sensors are ON. - Also move the autosuspend delay to place when user requested turn off of sensors, like after user finished raw read or buffer disable Signed-off-by: Srinivas Pandruvada <[email protected]> Tested-by: Bastien Nocera <[email protected]> Cc: <[email protected]> Signed-off-by: Jonathan Cameron <[email protected]>
2017-08-20iio: trigger: stm32-timer: fix get trigger modeFabrice Gasnier1-1/+1
Fix reading trigger mode, when other bit-fields are set. SMCR register value must be masked to read SMS (slave mode selection) only. Fixes: 9eba381 ("iio: make stm32 trigger driver use INDIO_HARDWARE_TRIGGERED mode") Signed-off-by: Fabrice Gasnier <[email protected]> Cc: <[email protected]> Signed-off-by: Jonathan Cameron <[email protected]>
2017-08-20iio: imu: adis16480: Fix acceleration scale factor for adis16480Dragos Bogdan1-1/+1
According to the datasheet, the range of the acceleration is [-10 g, + 10 g], so the scale factor should be 10 instead of 5. Signed-off-by: Dragos Bogdan <[email protected]> Acked-by: Lars-Peter Clausen <[email protected]> Cc: <[email protected]> Signed-off-by: Jonathan Cameron <[email protected]>
2017-08-20PATCH] iio: Fix some documentation warningsJonathan Corbet2-3/+3
The kerneldoc description for the trig_readonly field of struct iio_dev lacked a colon, leading to this doc build warning: ./include/linux/iio/iio.h:603: warning: No description found for parameter 'trig_readonly' A similar issue for iio_trigger_set_immutable() in trigger.h yielded: ./include/linux/iio/trigger.h:151: warning: No description found for parameter 'indio_dev' ./include/linux/iio/trigger.h:151: warning: No description found for parameter 'trig' Fix the formatting and silence the warnings. Signed-off-by: Jonathan Corbet <[email protected]> Signed-off-by: Jonathan Cameron <[email protected]>
2017-08-20genirq/ipi: Fixup checks against nr_cpu_idsAlexey Dobriyan1-2/+2
Valid CPU ids are [0, nr_cpu_ids-1] inclusive. Fixes: 3b8e29a82dd1 ("genirq: Implement ipi_send_mask/single()") Fixes: f9bce791ae2a ("genirq: Add a new function to get IPI reverse mapping") Signed-off-by: Alexey Dobriyan <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Cc: [email protected] Link: http://lkml.kernel.org/r/20170819095751.GB27864@avx2
2017-08-20ALSA: firewire-motu: destroy stream data surely at failure of card ↵Takashi Sakamoto1-0/+1
initialization When failing sound card registration after initializing stream data, this module leaves allocated data in stream data. This commit fixes the bug. Fixes: 9b2bb4f2f4a2 ('ALSA: firewire-motu: add stream management functionality') Cc: <[email protected]> # v4.12+ Signed-off-by: Takashi Sakamoto <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2017-08-20ALSA: firewire: fix NULL pointer dereference when releasing uninitialized ↵Takashi Sakamoto1-1/+6
data of iso-resource When calling 'iso_resource_free()' for uninitialized data, this function causes NULL pointer dereference due to its 'unit' member. This occurs when unplugging audio and music units on IEEE 1394 bus at failure of card registration. This commit fixes the bug. The bug exists since kernel v4.5. Fixes: 324540c4e05c ('ALSA: fireface: postpone sound card registration') at v4.12 Fixes: 8865a31e0fd8 ('ALSA: firewire-motu: postpone sound card registration') at v4.12 Fixes: b610386c8afb ('ALSA: firewire-tascam: deleyed registration of sound card') at v4.7 Fixes: 86c8dd7f4da3 ('ALSA: firewire-digi00x: delayed registration of sound card') at v4.7 Fixes: 6c29230e2a5f ('ALSA: oxfw: delayed registration of sound card') at v4.7 Fixes: 7d3c1d5901aa ('ALSA: fireworks: delayed registration of sound card') at v4.7 Fixes: 04a2c73c97eb ('ALSA: bebob: delayed registration of sound card') at v4.7 Fixes: b59fb1900b4f ('ALSA: dice: postpone card registration') at v4.5 Cc: <[email protected]> # v4.5+ Signed-off-by: Takashi Sakamoto <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2017-08-18Input: trackpoint - add new trackpoint firmware IDAaron Ma2-2/+4
Synaptics add new TP firmware ID: 0x2 and 0x3, for now both lower 2 bits are indicated as TP. Change the constant to bitwise values. This makes trackpoint to be recognized on Lenovo Carbon X1 Gen5 instead of it being identified as "PS/2 Generic Mouse". Signed-off-by: Aaron Ma <[email protected]> Cc: [email protected] Signed-off-by: Dmitry Torokhov <[email protected]>
2017-08-18Input: elan_i2c - add ELAN0602 ACPI ID to support Lenovo Yoga310KT Liao1-0/+1
Add ELAN0602 to the list of known ACPI IDs to enable support for ELAN touchpads found in Lenovo Yoga310. Signed-off-by: KT Liao <[email protected]> Cc: [email protected] Signed-off-by: Dmitry Torokhov <[email protected]>
2017-08-18net: sched: fix NULL pointer dereference when action calls some targetsXin Long1-0/+2
As we know in some target's checkentry it may dereference par.entryinfo to check entry stuff inside. But when sched action calls xt_check_target, par.entryinfo is set with NULL. It would cause kernel panic when calling some targets. It can be reproduce with: # tc qd add dev eth1 ingress handle ffff: # tc filter add dev eth1 parent ffff: u32 match u32 0 0 action xt \ -j ECN --ecn-tcp-remove It could also crash kernel when using target CLUSTERIP or TPROXY. By now there's no proper value for par.entryinfo in ipt_init_target, but it can not be set with NULL. This patch is to void all these panics by setting it with an ipt_entry obj with all members = 0. Note that this issue has been there since the very beginning. Signed-off-by: Xin Long <[email protected]> Acked-by: Pablo Neira Ayuso <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-08-18rxrpc: Fix oops when discarding a preallocated service callDavid Howells1-0/+1
rxrpc_service_prealloc_one() doesn't set the socket pointer on any new call it preallocates, but does add it to the rxrpc net namespace call list. This, however, causes rxrpc_put_call() to oops when the call is discarded when the socket is closed. rxrpc_put_call() needs the socket to be able to reach the namespace so that it can use a lock held therein. Fix this by setting a call's socket pointer immediately before discarding it. This can be triggered by unloading the kafs module, resulting in an oops like the following: BUG: unable to handle kernel NULL pointer dereference at 0000000000000030 IP: rxrpc_put_call+0x1e2/0x32d PGD 0 P4D 0 Oops: 0000 [#1] SMP Modules linked in: kafs(E-) CPU: 3 PID: 3037 Comm: rmmod Tainted: G E 4.12.0-fscache+ #213 Hardware name: ASUS All Series/H97-PLUS, BIOS 2306 10/09/2014 task: ffff8803fc92e2c0 task.stack: ffff8803fef74000 RIP: 0010:rxrpc_put_call+0x1e2/0x32d RSP: 0018:ffff8803fef77e08 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff8803fab99ac0 RCX: 000000000000000f RDX: ffffffff81c50a40 RSI: 000000000000000c RDI: ffff8803fc92ea88 RBP: ffff8803fef77e30 R08: ffff8803fc87b941 R09: ffffffff82946d20 R10: ffff8803fef77d10 R11: 00000000000076fc R12: 0000000000000005 R13: ffff8803fab99c20 R14: 0000000000000001 R15: ffffffff816c6aee FS: 00007f915a059700(0000) GS:ffff88041fb80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000030 CR3: 00000003fef39000 CR4: 00000000001406e0 Call Trace: rxrpc_discard_prealloc+0x325/0x341 rxrpc_listen+0xf9/0x146 kernel_listen+0xb/0xd afs_close_socket+0x3e/0x173 [kafs] afs_exit+0x1f/0x57 [kafs] SyS_delete_module+0x10f/0x19a do_syscall_64+0x8a/0x149 entry_SYSCALL64_slow_path+0x25/0x25 Fixes: 2baec2c3f854 ("rxrpc: Support network namespacing") Signed-off-by: David Howells <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-08-18irda: do not leak initialized list.dev to userspaceColin Ian King1-1/+1
list.dev has not been initialized and so the copy_to_user is copying data from the stack back to user space which is a potential information leak. Fix this ensuring all of list is initialized to zero. Detected by CoverityScan, CID#1357894 ("Uninitialized scalar variable") Signed-off-by: Colin Ian King <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-08-18net/mlx4_core: Enable 4K UAR if SRIOV module parameter is not enabledHuy Nguyen1-2/+2
enable_4k_uar module parameter was added in patch cited below to address the backward compatibility issue in SRIOV when the VM has system's PAGE_SIZE uar implementation and the Hypervisor has 4k uar implementation. The above compatibility issue does not exist in the non SRIOV case. In this patch, we always enable 4k uar implementation if SRIOV is not enabled on mlx4's supported cards. Fixes: 76e39ccf9c36 ("net/mlx4_core: Fix backward compatibility on VFs") Signed-off-by: Huy Nguyen <[email protected]> Reviewed-by: Daniel Jurgens <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-08-18PCI: Allow PCI express root ports to find themselvesThierry Reding1-5/+4
If the pci_find_pcie_root_port() function is called on a root port itself, return the root port rather than NULL. This effectively reverts commit 0e405232871d6 ("PCI: fix oops when try to find Root Port for a PCI device") which added an extra check that would now be redundant. Fixes: a99b646afa8a ("PCI: Disable PCIe Relaxed Ordering if unsupported") Fixes: c56d4450eb68 ("PCI: Turn off Request Attributes to avoid Chelsio T5 Completion erratum") Signed-off-by: Thierry Reding <[email protected]> Acked-by: Bjorn Helgaas <[email protected]> Tested-by: Shawn Lin <[email protected]> Tested-by: Michael Ellerman <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-08-18tcp: when rearming RTO, if RTO time is in past then fire RTO ASAPNeal Cardwell1-2/+1
In some situations tcp_send_loss_probe() can realize that it's unable to send a loss probe (TLP), and falls back to calling tcp_rearm_rto() to schedule an RTO timer. In such cases, sometimes tcp_rearm_rto() realizes that the RTO was eligible to fire immediately or at some point in the past (delta_us <= 0). Previously in such cases tcp_rearm_rto() was scheduling such "overdue" RTOs to happen at now + icsk_rto, which caused needless delays of hundreds of milliseconds (and non-linear behavior that made reproducible testing difficult). This commit changes the logic to schedule "overdue" RTOs ASAP, rather than at now + icsk_rto. Fixes: 6ba8a3b19e76 ("tcp: Tail loss probe (TLP)") Suggested-by: Yuchung Cheng <[email protected]> Signed-off-by: Neal Cardwell <[email protected]> Signed-off-by: Yuchung Cheng <[email protected]> Signed-off-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-08-18Merge branch 'akpm' (patches from Andrew)Linus Torvalds22-103/+224
Merge misc fixes from Andrew Morton: "14 fixes" * emailed patches from Andrew Morton <[email protected]>: mm: revert x86_64 and arm64 ELF_ET_DYN_BASE base changes mm/vmalloc.c: don't unconditonally use __GFP_HIGHMEM mm/mempolicy: fix use after free when calling get_mempolicy mm/cma_debug.c: fix stack corruption due to sprintf usage signal: don't remove SIGNAL_UNKILLABLE for traced tasks. mm, oom: fix potential data corruption when oom_reaper races with writer mm: fix double mmap_sem unlock on MMF_UNSTABLE enforced SIGBUS slub: fix per memcg cache leak on css offline mm: discard memblock data later test_kmod: fix description for -s -and -c parameters kmod: fix wait on recursive loop wait: add wait_event_killable_timeout() kernel/watchdog: fix Kconfig constraints for perf hardlockup watchdog mm: memcontrol: fix NULL pointer crash in test_clear_page_writeback()
2017-08-18net: check and errout if res->fi is NULL when RTM_F_FIB_MATCH is setRoopa Prabhu1-2/+9
Syzkaller hit 'general protection fault in fib_dump_info' bug on commit 4.13-rc5.. Guilty file: net/ipv4/fib_semantics.c kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN Modules linked in: CPU: 0 PID: 2808 Comm: syz-executor0 Not tainted 4.13.0-rc5 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 task: ffff880078562700 task.stack: ffff880078110000 RIP: 0010:fib_dump_info+0x388/0x1170 net/ipv4/fib_semantics.c:1314 RSP: 0018:ffff880078117010 EFLAGS: 00010206 RAX: dffffc0000000000 RBX: 00000000000000fe RCX: 0000000000000002 RDX: 0000000000000006 RSI: ffff880078117084 RDI: 0000000000000030 RBP: ffff880078117268 R08: 000000000000000c R09: ffff8800780d80c8 R10: 0000000058d629b4 R11: 0000000067fce681 R12: 0000000000000000 R13: ffff8800784bd540 R14: ffff8800780d80b5 R15: ffff8800780d80a4 FS: 00000000022fa940(0000) GS:ffff88007fc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000004387d0 CR3: 0000000079135000 CR4: 00000000000006f0 Call Trace: inet_rtm_getroute+0xc89/0x1f50 net/ipv4/route.c:2766 rtnetlink_rcv_msg+0x288/0x680 net/core/rtnetlink.c:4217 netlink_rcv_skb+0x340/0x470 net/netlink/af_netlink.c:2397 rtnetlink_rcv+0x28/0x30 net/core/rtnetlink.c:4223 netlink_unicast_kernel net/netlink/af_netlink.c:1265 [inline] netlink_unicast+0x4c4/0x6e0 net/netlink/af_netlink.c:1291 netlink_sendmsg+0x8c4/0xca0 net/netlink/af_netlink.c:1854 sock_sendmsg_nosec net/socket.c:633 [inline] sock_sendmsg+0xca/0x110 net/socket.c:643 ___sys_sendmsg+0x779/0x8d0 net/socket.c:2035 __sys_sendmsg+0xd1/0x170 net/socket.c:2069 SYSC_sendmsg net/socket.c:2080 [inline] SyS_sendmsg+0x2d/0x50 net/socket.c:2076 entry_SYSCALL_64_fastpath+0x1a/0xa5 RIP: 0033:0x4512e9 RSP: 002b:00007ffc75584cc8 EFLAGS: 00000216 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00000000004512e9 RDX: 0000000000000000 RSI: 0000000020f2cfc8 RDI: 0000000000000003 RBP: 000000000000000e R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000216 R12: fffffffffffffffe R13: 0000000000718000 R14: 0000000020c44ff0 R15: 0000000000000000 Code: 00 0f b6 8d ec fd ff ff 48 8b 85 f0 fd ff ff 88 48 17 48 8b 45 28 48 8d 78 30 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 08 3c 03 0f 8e cb 0c 00 00 48 8b 45 28 44 RIP: fib_dump_info+0x388/0x1170 net/ipv4/fib_semantics.c:1314 RSP: ffff880078117010 ---[ end trace 254a7af28348f88b ]--- This patch adds a res->fi NULL check. example run: $ip route get 0.0.0.0 iif virt1-0 broadcast 0.0.0.0 dev lo cache <local,brd> iif virt1-0 $ip route get 0.0.0.0 iif virt1-0 fibmatch RTNETLINK answers: No route to host Reported-by: idaifish <[email protected]> Reported-by: Dmitry Vyukov <[email protected]> Fixes: b61798130f1b ("net: ipv4: RTM_GETROUTE: return matched fib result when requested") Signed-off-by: Roopa Prabhu <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-08-18ipv6: reset fn->rr_ptr when replacing routeWei Wang1-0/+4
syzcaller reported the following use-after-free issue in rt6_select(): BUG: KASAN: use-after-free in rt6_select net/ipv6/route.c:755 [inline] at addr ffff8800bc6994e8 BUG: KASAN: use-after-free in ip6_pol_route.isra.46+0x1429/0x1470 net/ipv6/route.c:1084 at addr ffff8800bc6994e8 Read of size 4 by task syz-executor1/439628 CPU: 0 PID: 439628 Comm: syz-executor1 Not tainted 4.3.5+ #8 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 0000000000000000 ffff88018fe435b0 ffffffff81ca384d ffff8801d3588c00 ffff8800bc699380 ffff8800bc699500 dffffc0000000000 ffff8801d40a47c0 ffff88018fe435d8 ffffffff81735751 ffff88018fe43660 ffff8800bc699380 Call Trace: [<ffffffff81ca384d>] __dump_stack lib/dump_stack.c:15 [inline] [<ffffffff81ca384d>] dump_stack+0xc1/0x124 lib/dump_stack.c:51 sctp: [Deprecated]: syz-executor0 (pid 439615) Use of struct sctp_assoc_value in delayed_ack socket option. Use struct sctp_sack_info instead [<ffffffff81735751>] kasan_object_err+0x21/0x70 mm/kasan/report.c:158 [<ffffffff817359c4>] print_address_description mm/kasan/report.c:196 [inline] [<ffffffff817359c4>] kasan_report_error+0x1b4/0x4a0 mm/kasan/report.c:285 [<ffffffff81735d93>] kasan_report mm/kasan/report.c:305 [inline] [<ffffffff81735d93>] __asan_report_load4_noabort+0x43/0x50 mm/kasan/report.c:325 [<ffffffff82a28e39>] rt6_select net/ipv6/route.c:755 [inline] [<ffffffff82a28e39>] ip6_pol_route.isra.46+0x1429/0x1470 net/ipv6/route.c:1084 [<ffffffff82a28fb1>] ip6_pol_route_output+0x81/0xb0 net/ipv6/route.c:1203 [<ffffffff82ab0a50>] fib6_rule_action+0x1f0/0x680 net/ipv6/fib6_rules.c:95 [<ffffffff8265cbb6>] fib_rules_lookup+0x2a6/0x7a0 net/core/fib_rules.c:223 [<ffffffff82ab1430>] fib6_rule_lookup+0xd0/0x250 net/ipv6/fib6_rules.c:41 [<ffffffff82a22006>] ip6_route_output+0x1d6/0x2c0 net/ipv6/route.c:1224 [<ffffffff829e83d2>] ip6_dst_lookup_tail+0x4d2/0x890 net/ipv6/ip6_output.c:943 [<ffffffff829e889a>] ip6_dst_lookup_flow+0x9a/0x250 net/ipv6/ip6_output.c:1079 [<ffffffff82a9f7d8>] ip6_datagram_dst_update+0x538/0xd40 net/ipv6/datagram.c:91 [<ffffffff82aa0978>] __ip6_datagram_connect net/ipv6/datagram.c:251 [inline] [<ffffffff82aa0978>] ip6_datagram_connect+0x518/0xe50 net/ipv6/datagram.c:272 [<ffffffff82aa1313>] ip6_datagram_connect_v6_only+0x63/0x90 net/ipv6/datagram.c:284 [<ffffffff8292f790>] inet_dgram_connect+0x170/0x1f0 net/ipv4/af_inet.c:564 [<ffffffff82565547>] SYSC_connect+0x1a7/0x2f0 net/socket.c:1582 [<ffffffff8256a649>] SyS_connect+0x29/0x30 net/socket.c:1563 [<ffffffff82c72032>] entry_SYSCALL_64_fastpath+0x12/0x17 Object at ffff8800bc699380, in cache ip6_dst_cache size: 384 The root cause of it is that in fib6_add_rt2node(), when it replaces an existing route with the new one, it does not update fn->rr_ptr. This commit resets fn->rr_ptr to NULL when it points to a route which is replaced in fib6_add_rt2node(). Fixes: 27596472473a ("ipv6: fix ECMP route replacement") Signed-off-by: Wei Wang <[email protected]> Acked-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-08-18staging: rtl8188eu: add RNX-N150NUB supportCharles Milette1-0/+1
Add support for USB Device Rosewill RNX-N150NUB. VendorID: 0x0bda, ProductID: 0xffef Signed-off-by: Charles Milette <[email protected]> Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2017-08-18sctp: fully initialize the IPv6 address in sctp_v6_to_addr()Alexander Potapenko1-0/+2
KMSAN reported use of uninitialized sctp_addr->v4.sin_addr.s_addr and sctp_addr->v6.sin6_scope_id in sctp_v6_cmp_addr() (see below). Make sure all fields of an IPv6 address are initialized, which guarantees that the IPv4 fields are also initialized. ================================================================== BUG: KMSAN: use of uninitialized memory in sctp_v6_cmp_addr+0x8d4/0x9f0 net/sctp/ipv6.c:517 CPU: 2 PID: 31056 Comm: syz-executor1 Not tainted 4.11.0-rc5+ #2944 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: dump_stack+0x172/0x1c0 lib/dump_stack.c:42 is_logbuf_locked mm/kmsan/kmsan.c:59 [inline] kmsan_report+0x12a/0x180 mm/kmsan/kmsan.c:938 native_save_fl arch/x86/include/asm/irqflags.h:18 [inline] arch_local_save_flags arch/x86/include/asm/irqflags.h:72 [inline] arch_local_irq_save arch/x86/include/asm/irqflags.h:113 [inline] __msan_warning_32+0x61/0xb0 mm/kmsan/kmsan_instr.c:467 sctp_v6_cmp_addr+0x8d4/0x9f0 net/sctp/ipv6.c:517 sctp_v6_get_dst+0x8c7/0x1630 net/sctp/ipv6.c:290 sctp_transport_route+0x101/0x570 net/sctp/transport.c:292 sctp_assoc_add_peer+0x66d/0x16f0 net/sctp/associola.c:651 sctp_sendmsg+0x35a5/0x4f90 net/sctp/socket.c:1871 inet_sendmsg+0x498/0x670 net/ipv4/af_inet.c:762 sock_sendmsg_nosec net/socket.c:633 [inline] sock_sendmsg net/socket.c:643 [inline] SYSC_sendto+0x608/0x710 net/socket.c:1696 SyS_sendto+0x8a/0xb0 net/socket.c:1664 entry_SYSCALL_64_fastpath+0x13/0x94 RIP: 0033:0x44b479 RSP: 002b:00007f6213f21c08 EFLAGS: 00000286 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 0000000020000000 RCX: 000000000044b479 RDX: 0000000000000041 RSI: 0000000020edd000 RDI: 0000000000000006 RBP: 00000000007080a8 R08: 0000000020b85fe4 R09: 000000000000001c R10: 0000000000040005 R11: 0000000000000286 R12: 00000000ffffffff R13: 0000000000003760 R14: 00000000006e5820 R15: 0000000000ff8000 origin description: ----dst_saddr@sctp_v6_get_dst local variable created at: sk_fullsock include/net/sock.h:2321 [inline] inet6_sk include/linux/ipv6.h:309 [inline] sctp_v6_get_dst+0x91/0x1630 net/sctp/ipv6.c:241 sctp_transport_route+0x101/0x570 net/sctp/transport.c:292 ================================================================== BUG: KMSAN: use of uninitialized memory in sctp_v6_cmp_addr+0x8d4/0x9f0 net/sctp/ipv6.c:517 CPU: 2 PID: 31056 Comm: syz-executor1 Not tainted 4.11.0-rc5+ #2944 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: dump_stack+0x172/0x1c0 lib/dump_stack.c:42 is_logbuf_locked mm/kmsan/kmsan.c:59 [inline] kmsan_report+0x12a/0x180 mm/kmsan/kmsan.c:938 native_save_fl arch/x86/include/asm/irqflags.h:18 [inline] arch_local_save_flags arch/x86/include/asm/irqflags.h:72 [inline] arch_local_irq_save arch/x86/include/asm/irqflags.h:113 [inline] __msan_warning_32+0x61/0xb0 mm/kmsan/kmsan_instr.c:467 sctp_v6_cmp_addr+0x8d4/0x9f0 net/sctp/ipv6.c:517 sctp_v6_get_dst+0x8c7/0x1630 net/sctp/ipv6.c:290 sctp_transport_route+0x101/0x570 net/sctp/transport.c:292 sctp_assoc_add_peer+0x66d/0x16f0 net/sctp/associola.c:651 sctp_sendmsg+0x35a5/0x4f90 net/sctp/socket.c:1871 inet_sendmsg+0x498/0x670 net/ipv4/af_inet.c:762 sock_sendmsg_nosec net/socket.c:633 [inline] sock_sendmsg net/socket.c:643 [inline] SYSC_sendto+0x608/0x710 net/socket.c:1696 SyS_sendto+0x8a/0xb0 net/socket.c:1664 entry_SYSCALL_64_fastpath+0x13/0x94 RIP: 0033:0x44b479 RSP: 002b:00007f6213f21c08 EFLAGS: 00000286 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 0000000020000000 RCX: 000000000044b479 RDX: 0000000000000041 RSI: 0000000020edd000 RDI: 0000000000000006 RBP: 00000000007080a8 R08: 0000000020b85fe4 R09: 000000000000001c R10: 0000000000040005 R11: 0000000000000286 R12: 00000000ffffffff R13: 0000000000003760 R14: 00000000006e5820 R15: 0000000000ff8000 origin description: ----dst_saddr@sctp_v6_get_dst local variable created at: sk_fullsock include/net/sock.h:2321 [inline] inet6_sk include/linux/ipv6.h:309 [inline] sctp_v6_get_dst+0x91/0x1630 net/sctp/ipv6.c:241 sctp_transport_route+0x101/0x570 net/sctp/transport.c:292 ================================================================== Signed-off-by: Alexander Potapenko <[email protected]> Reviewed-by: Xin Long <[email protected]> Acked-by: Marcelo Ricardo Leitner <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-08-18tipc: fix use-after-freeEric Dumazet1-2/+4
syszkaller reported use-after-free in tipc [1] When msg->rep skb is freed, set the pointer to NULL, so that caller does not free it again. [1] ================================================================== BUG: KASAN: use-after-free in skb_push+0xd4/0xe0 net/core/skbuff.c:1466 Read of size 8 at addr ffff8801c6e71e90 by task syz-executor5/4115 CPU: 1 PID: 4115 Comm: syz-executor5 Not tainted 4.13.0-rc4+ #32 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:16 [inline] dump_stack+0x194/0x257 lib/dump_stack.c:52 print_address_description+0x73/0x250 mm/kasan/report.c:252 kasan_report_error mm/kasan/report.c:351 [inline] kasan_report+0x24e/0x340 mm/kasan/report.c:409 __asan_report_load8_noabort+0x14/0x20 mm/kasan/report.c:430 skb_push+0xd4/0xe0 net/core/skbuff.c:1466 tipc_nl_compat_recv+0x833/0x18f0 net/tipc/netlink_compat.c:1209 genl_family_rcv_msg+0x7b7/0xfb0 net/netlink/genetlink.c:598 genl_rcv_msg+0xb2/0x140 net/netlink/genetlink.c:623 netlink_rcv_skb+0x216/0x440 net/netlink/af_netlink.c:2397 genl_rcv+0x28/0x40 net/netlink/genetlink.c:634 netlink_unicast_kernel net/netlink/af_netlink.c:1265 [inline] netlink_unicast+0x4e8/0x6f0 net/netlink/af_netlink.c:1291 netlink_sendmsg+0xa4a/0xe60 net/netlink/af_netlink.c:1854 sock_sendmsg_nosec net/socket.c:633 [inline] sock_sendmsg+0xca/0x110 net/socket.c:643 sock_write_iter+0x31a/0x5d0 net/socket.c:898 call_write_iter include/linux/fs.h:1743 [inline] new_sync_write fs/read_write.c:457 [inline] __vfs_write+0x684/0x970 fs/read_write.c:470 vfs_write+0x189/0x510 fs/read_write.c:518 SYSC_write fs/read_write.c:565 [inline] SyS_write+0xef/0x220 fs/read_write.c:557 entry_SYSCALL_64_fastpath+0x1f/0xbe RIP: 0033:0x4512e9 RSP: 002b:00007f3bc8184c08 EFLAGS: 00000216 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000718000 RCX: 00000000004512e9 RDX: 0000000000000020 RSI: 0000000020fdb000 RDI: 0000000000000006 RBP: 0000000000000086 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000216 R12: 00000000004b5e76 R13: 00007f3bc8184b48 R14: 00000000004b5e86 R15: 0000000000000000 Allocated by task 4115: save_stack_trace+0x16/0x20 arch/x86/kernel/stacktrace.c:59 save_stack+0x43/0xd0 mm/kasan/kasan.c:447 set_track mm/kasan/kasan.c:459 [inline] kasan_kmalloc+0xad/0xe0 mm/kasan/kasan.c:551 kasan_slab_alloc+0x12/0x20 mm/kasan/kasan.c:489 kmem_cache_alloc_node+0x13d/0x750 mm/slab.c:3651 __alloc_skb+0xf1/0x740 net/core/skbuff.c:219 alloc_skb include/linux/skbuff.h:903 [inline] tipc_tlv_alloc+0x26/0xb0 net/tipc/netlink_compat.c:148 tipc_nl_compat_dumpit+0xf2/0x3c0 net/tipc/netlink_compat.c:248 tipc_nl_compat_handle net/tipc/netlink_compat.c:1130 [inline] tipc_nl_compat_recv+0x756/0x18f0 net/tipc/netlink_compat.c:1199 genl_family_rcv_msg+0x7b7/0xfb0 net/netlink/genetlink.c:598 genl_rcv_msg+0xb2/0x140 net/netlink/genetlink.c:623 netlink_rcv_skb+0x216/0x440 net/netlink/af_netlink.c:2397 genl_rcv+0x28/0x40 net/netlink/genetlink.c:634 netlink_unicast_kernel net/netlink/af_netlink.c:1265 [inline] netlink_unicast+0x4e8/0x6f0 net/netlink/af_netlink.c:1291 netlink_sendmsg+0xa4a/0xe60 net/netlink/af_netlink.c:1854 sock_sendmsg_nosec net/socket.c:633 [inline] sock_sendmsg+0xca/0x110 net/socket.c:643 sock_write_iter+0x31a/0x5d0 net/socket.c:898 call_write_iter include/linux/fs.h:1743 [inline] new_sync_write fs/read_write.c:457 [inline] __vfs_write+0x684/0x970 fs/read_write.c:470 vfs_write+0x189/0x510 fs/read_write.c:518 SYSC_write fs/read_write.c:565 [inline] SyS_write+0xef/0x220 fs/read_write.c:557 entry_SYSCALL_64_fastpath+0x1f/0xbe Freed by task 4115: save_stack_trace+0x16/0x20 arch/x86/kernel/stacktrace.c:59 save_stack+0x43/0xd0 mm/kasan/kasan.c:447 set_track mm/kasan/kasan.c:459 [inline] kasan_slab_free+0x71/0xc0 mm/kasan/kasan.c:524 __cache_free mm/slab.c:3503 [inline] kmem_cache_free+0x77/0x280 mm/slab.c:3763 kfree_skbmem+0x1a1/0x1d0 net/core/skbuff.c:622 __kfree_skb net/core/skbuff.c:682 [inline] kfree_skb+0x165/0x4c0 net/core/skbuff.c:699 tipc_nl_compat_dumpit+0x36a/0x3c0 net/tipc/netlink_compat.c:260 tipc_nl_compat_handle net/tipc/netlink_compat.c:1130 [inline] tipc_nl_compat_recv+0x756/0x18f0 net/tipc/netlink_compat.c:1199 genl_family_rcv_msg+0x7b7/0xfb0 net/netlink/genetlink.c:598 genl_rcv_msg+0xb2/0x140 net/netlink/genetlink.c:623 netlink_rcv_skb+0x216/0x440 net/netlink/af_netlink.c:2397 genl_rcv+0x28/0x40 net/netlink/genetlink.c:634 netlink_unicast_kernel net/netlink/af_netlink.c:1265 [inline] netlink_unicast+0x4e8/0x6f0 net/netlink/af_netlink.c:1291 netlink_sendmsg+0xa4a/0xe60 net/netlink/af_netlink.c:1854 sock_sendmsg_nosec net/socket.c:633 [inline] sock_sendmsg+0xca/0x110 net/socket.c:643 sock_write_iter+0x31a/0x5d0 net/socket.c:898 call_write_iter include/linux/fs.h:1743 [inline] new_sync_write fs/read_write.c:457 [inline] __vfs_write+0x684/0x970 fs/read_write.c:470 vfs_write+0x189/0x510 fs/read_write.c:518 SYSC_write fs/read_write.c:565 [inline] SyS_write+0xef/0x220 fs/read_write.c:557 entry_SYSCALL_64_fastpath+0x1f/0xbe The buggy address belongs to the object at ffff8801c6e71dc0 which belongs to the cache skbuff_head_cache of size 224 The buggy address is located 208 bytes inside of 224-byte region [ffff8801c6e71dc0, ffff8801c6e71ea0) The buggy address belongs to the page: page:ffffea00071b9c40 count:1 mapcount:0 mapping:ffff8801c6e71000 index:0x0 flags: 0x200000000000100(slab) raw: 0200000000000100 ffff8801c6e71000 0000000000000000 000000010000000c raw: ffffea0007224a20 ffff8801d98caf48 ffff8801d9e79040 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8801c6e71d80: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb ffff8801c6e71e00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8801c6e71e80: fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc fc ^ ffff8801c6e71f00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff8801c6e71f80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ================================================================== Signed-off-by: Eric Dumazet <[email protected]> Reported-by: Dmitry Vyukov <[email protected]> Cc: Jon Maloy <[email protected]> Cc: Ying Xue <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-08-18tun: handle register_netdevice() failures properlyEric Dumazet1-0/+3
syzkaller reported a double free [1], caused by the fact that tun driver was not updated properly when priv_destructor was added. When/if register_netdevice() fails, priv_destructor() must have been called already. [1] BUG: KASAN: double-free or invalid-free in selinux_tun_dev_free_security+0x15/0x20 security/selinux/hooks.c:5023 CPU: 0 PID: 2919 Comm: syzkaller227220 Not tainted 4.13.0-rc4+ #23 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:16 [inline] dump_stack+0x194/0x257 lib/dump_stack.c:52 print_address_description+0x7f/0x260 mm/kasan/report.c:252 kasan_report_double_free+0x55/0x80 mm/kasan/report.c:333 kasan_slab_free+0xa0/0xc0 mm/kasan/kasan.c:514 __cache_free mm/slab.c:3503 [inline] kfree+0xd3/0x260 mm/slab.c:3820 selinux_tun_dev_free_security+0x15/0x20 security/selinux/hooks.c:5023 security_tun_dev_free_security+0x48/0x80 security/security.c:1512 tun_set_iff drivers/net/tun.c:1884 [inline] __tun_chr_ioctl+0x2ce6/0x3d50 drivers/net/tun.c:2064 tun_chr_ioctl+0x2a/0x40 drivers/net/tun.c:2309 vfs_ioctl fs/ioctl.c:45 [inline] do_vfs_ioctl+0x1b1/0x1520 fs/ioctl.c:685 SYSC_ioctl fs/ioctl.c:700 [inline] SyS_ioctl+0x8f/0xc0 fs/ioctl.c:691 entry_SYSCALL_64_fastpath+0x1f/0xbe RIP: 0033:0x443ff9 RSP: 002b:00007ffc34271f68 EFLAGS: 00000217 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00000000004002e0 RCX: 0000000000443ff9 RDX: 0000000020533000 RSI: 00000000400454ca RDI: 0000000000000003 RBP: 0000000000000086 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000217 R12: 0000000000401ce0 R13: 0000000000401d70 R14: 0000000000000000 R15: 0000000000000000 Allocated by task 2919: save_stack_trace+0x16/0x20 arch/x86/kernel/stacktrace.c:59 save_stack+0x43/0xd0 mm/kasan/kasan.c:447 set_track mm/kasan/kasan.c:459 [inline] kasan_kmalloc+0xaa/0xd0 mm/kasan/kasan.c:551 kmem_cache_alloc_trace+0x101/0x6f0 mm/slab.c:3627 kmalloc include/linux/slab.h:493 [inline] kzalloc include/linux/slab.h:666 [inline] selinux_tun_dev_alloc_security+0x49/0x170 security/selinux/hooks.c:5012 security_tun_dev_alloc_security+0x6d/0xa0 security/security.c:1506 tun_set_iff drivers/net/tun.c:1839 [inline] __tun_chr_ioctl+0x1730/0x3d50 drivers/net/tun.c:2064 tun_chr_ioctl+0x2a/0x40 drivers/net/tun.c:2309 vfs_ioctl fs/ioctl.c:45 [inline] do_vfs_ioctl+0x1b1/0x1520 fs/ioctl.c:685 SYSC_ioctl fs/ioctl.c:700 [inline] SyS_ioctl+0x8f/0xc0 fs/ioctl.c:691 entry_SYSCALL_64_fastpath+0x1f/0xbe Freed by task 2919: save_stack_trace+0x16/0x20 arch/x86/kernel/stacktrace.c:59 save_stack+0x43/0xd0 mm/kasan/kasan.c:447 set_track mm/kasan/kasan.c:459 [inline] kasan_slab_free+0x6e/0xc0 mm/kasan/kasan.c:524 __cache_free mm/slab.c:3503 [inline] kfree+0xd3/0x260 mm/slab.c:3820 selinux_tun_dev_free_security+0x15/0x20 security/selinux/hooks.c:5023 security_tun_dev_free_security+0x48/0x80 security/security.c:1512 tun_free_netdev+0x13b/0x1b0 drivers/net/tun.c:1563 register_netdevice+0x8d0/0xee0 net/core/dev.c:7605 tun_set_iff drivers/net/tun.c:1859 [inline] __tun_chr_ioctl+0x1caf/0x3d50 drivers/net/tun.c:2064 tun_chr_ioctl+0x2a/0x40 drivers/net/tun.c:2309 vfs_ioctl fs/ioctl.c:45 [inline] do_vfs_ioctl+0x1b1/0x1520 fs/ioctl.c:685 SYSC_ioctl fs/ioctl.c:700 [inline] SyS_ioctl+0x8f/0xc0 fs/ioctl.c:691 entry_SYSCALL_64_fastpath+0x1f/0xbe The buggy address belongs to the object at ffff8801d2843b40 which belongs to the cache kmalloc-32 of size 32 The buggy address is located 0 bytes inside of 32-byte region [ffff8801d2843b40, ffff8801d2843b60) The buggy address belongs to the page: page:ffffea000660cea8 count:1 mapcount:0 mapping:ffff8801d2843000 index:0xffff8801d2843fc1 flags: 0x200000000000100(slab) raw: 0200000000000100 ffff8801d2843000 ffff8801d2843fc1 000000010000003f raw: ffffea0006626a40 ffffea00066141a0 ffff8801dbc00100 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8801d2843a00: fb fb fb fb fc fc fc fc fb fb fb fb fc fc fc fc ffff8801d2843a80: 00 00 00 fc fc fc fc fc fb fb fb fb fc fc fc fc >ffff8801d2843b00: 00 00 00 00 fc fc fc fc fb fb fb fb fc fc fc fc ^ ffff8801d2843b80: fb fb fb fb fc fc fc fc fb fb fb fb fc fc fc fc ffff8801d2843c00: fb fb fb fb fc fc fc fc fb fb fb fb fc fc fc fc ================================================================== Fixes: cf124db566e6 ("net: Fix inconsistent teardown and release of private netdev state.") Signed-off-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-08-18mm: revert x86_64 and arm64 ELF_ET_DYN_BASE base changesKees Cook2-4/+4
Moving the x86_64 and arm64 PIE base from 0x555555554000 to 0x000100000000 broke AddressSanitizer. This is a partial revert of: eab09532d400 ("binfmt_elf: use ELF_ET_DYN_BASE only for PIE") 02445990a96e ("arm64: move ELF_ET_DYN_BASE to 4GB / 4MB") The AddressSanitizer tool has hard-coded expectations about where executable mappings are loaded. The motivation for changing the PIE base in the above commits was to avoid the Stack-Clash CVEs that allowed executable mappings to get too close to heap and stack. This was mainly a problem on 32-bit, but the 64-bit bases were moved too, in an effort to proactively protect those systems (proofs of concept do exist that show 64-bit collisions, but other recent changes to fix stack accounting and setuid behaviors will minimize the impact). The new 32-bit PIE base is fine for ASan (since it matches the ET_EXEC base), so only the 64-bit PIE base needs to be reverted to let x86 and arm64 ASan binaries run again. Future changes to the 64-bit PIE base on these architectures can be made optional once a more dynamic method for dealing with AddressSanitizer is found. (e.g. always loading PIE into the mmap region for marked binaries.) Link: http://lkml.kernel.org/r/20170807201542.GA21271@beast Fixes: eab09532d400 ("binfmt_elf: use ELF_ET_DYN_BASE only for PIE") Fixes: 02445990a96e ("arm64: move ELF_ET_DYN_BASE to 4GB / 4MB") Signed-off-by: Kees Cook <[email protected]> Reported-by: Kostya Serebryany <[email protected]> Acked-by: Will Deacon <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: "H. Peter Anvin" <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2017-08-18mm/vmalloc.c: don't unconditonally use __GFP_HIGHMEMLaura Abbott1-5/+8
Commit 19809c2da28a ("mm, vmalloc: use __GFP_HIGHMEM implicitly") added use of __GFP_HIGHMEM for allocations. vmalloc_32 may use GFP_DMA/GFP_DMA32 which does not play nice with __GFP_HIGHMEM and will trigger a BUG in gfp_zone. Only add __GFP_HIGHMEM if we aren't using GFP_DMA/GFP_DMA32. Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1482249 Link: http://lkml.kernel.org/r/[email protected] Fixes: 19809c2da28a ("mm, vmalloc: use __GFP_HIGHMEM implicitly") Signed-off-by: Laura Abbott <[email protected]> Acked-by: Michal Hocko <[email protected]> Cc: Vlastimil Babka <[email protected]> Cc: "Kirill A. Shutemov" <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2017-08-18mm/mempolicy: fix use after free when calling get_mempolicyzhong jiang1-5/+0
I hit a use after free issue when executing trinity and repoduced it with KASAN enabled. The related call trace is as follows. BUG: KASan: use after free in SyS_get_mempolicy+0x3c8/0x960 at addr ffff8801f582d766 Read of size 2 by task syz-executor1/798 INFO: Allocated in mpol_new.part.2+0x74/0x160 age=3 cpu=1 pid=799 __slab_alloc+0x768/0x970 kmem_cache_alloc+0x2e7/0x450 mpol_new.part.2+0x74/0x160 mpol_new+0x66/0x80 SyS_mbind+0x267/0x9f0 system_call_fastpath+0x16/0x1b INFO: Freed in __mpol_put+0x2b/0x40 age=4 cpu=1 pid=799 __slab_free+0x495/0x8e0 kmem_cache_free+0x2f3/0x4c0 __mpol_put+0x2b/0x40 SyS_mbind+0x383/0x9f0 system_call_fastpath+0x16/0x1b INFO: Slab 0xffffea0009cb8dc0 objects=23 used=8 fp=0xffff8801f582de40 flags=0x200000000004080 INFO: Object 0xffff8801f582d760 @offset=5984 fp=0xffff8801f582d600 Bytes b4 ffff8801f582d750: ae 01 ff ff 00 00 00 00 5a 5a 5a 5a 5a 5a 5a 5a ........ZZZZZZZZ Object ffff8801f582d760: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk Object ffff8801f582d770: 6b 6b 6b 6b 6b 6b 6b a5 kkkkkkk. Redzone ffff8801f582d778: bb bb bb bb bb bb bb bb ........ Padding ffff8801f582d8b8: 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZ Memory state around the buggy address: ffff8801f582d600: fb fb fb fc fc fc fc fc fc fc fc fc fc fc fc fc ffff8801f582d680: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc >ffff8801f582d700: fc fc fc fc fc fc fc fc fc fc fc fc fb fb fb fc !shared memory policy is not protected against parallel removal by other thread which is normally protected by the mmap_sem. do_get_mempolicy, however, drops the lock midway while we can still access it later. Early premature up_read is a historical artifact from times when put_user was called in this path see https://lwn.net/Articles/124754/ but that is gone since 8bccd85ffbaf ("[PATCH] Implement sys_* do_* layering in the memory policy layer."). but when we have the the current mempolicy ref count model. The issue was introduced accordingly. Fix the issue by removing the premature release. Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: zhong jiang <[email protected]> Acked-by: Michal Hocko <[email protected]> Cc: Minchan Kim <[email protected]> Cc: Vlastimil Babka <[email protected]> Cc: David Rientjes <[email protected]> Cc: Mel Gorman <[email protected]> Cc: <[email protected]> [2.6+] Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.