aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2022-10-24drm/amd/display: make dcn32_mpc_funcs staticruanjinjie1-1/+1
The symbol is not used outside of the file, so mark it static. Fixes the following warning: drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_mpc.c:985:24: warning: symbol 'dcn32_mpc_funcs' was not declared. Should it be static? Reviewed-by: Harry Wentland <[email protected]> Signed-off-by: ruanjinjie <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-10-24drm/amd/display: make dcn32_mmhubbub_funcs staticruanjinjie1-1/+1
The symbol is not used outside of the file, so mark it static. Fixes the following warning: drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_mmhubbub.c:214:28: warning: symbol 'dcn32_mmhubbub_funcs' was not declared. Should it be static? Reviewed-by: Harry Wentland <[email protected]> Signed-off-by: ruanjinjie <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-10-24drm/amd/display: Make some symbols staticruanjinjie1-18/+18
These symbols qp_table_422_10bpc_min, qp_table_444_8bpc_max, qp_table_420_12bpc_max, qp_table_444_10bpc_min, qp_table_420_8bpc_max, qp_table_444_8bpc_min, qp_table_444_12bpc_min, qp_table_420_12bpc_min, qp_table_422_12bpc_min, qp_table_422_12bpc_max, qp_table_444_12bpc_max, qp_table_420_8bpc_min, qp_table_422_8bpc_min, qp_table_422_10bpc_max, qp_table_420_10bpc_max, qp_table_420_10bpc_min, qp_table_444_10bpc_max, qp_table_422_8bpc_max are not used outside of the file, so mark them static. ./drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dsc/qp_tables.h:28:18: warning: symbol 'qp_table_422_10bpc_min' was not declared. Should it be static? ./drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dsc/qp_tables.h:61:18: warning: symbol 'qp_table_444_8bpc_max' was not declared. Should it be static? ./drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dsc/qp_tables.h:102:18: warning: symbol 'qp_table_420_12bpc_max' was not declared. Should it be static? ./drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dsc/qp_tables.h:135:18: warning: symbol 'qp_table_444_10bpc_min' was not declared. Should it be static? ./drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dsc/qp_tables.h:188:18: warning: symbol 'qp_table_420_8bpc_max' was not declared. Should it be static? ./drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dsc/qp_tables.h:209:18: warning: symbol 'qp_table_444_8bpc_min' was not declared. Should it be static? ./drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dsc/qp_tables.h:250:18: warning: symbol 'qp_table_444_12bpc_min' was not declared. Should it be static? ./drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dsc/qp_tables.h:315:18: warning: symbol 'qp_table_420_12bpc_min' was not declared. Should it be static? ./drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dsc/qp_tables.h:348:18: warning: symbol 'qp_table_422_12bpc_min' was not declared. Should it be static? ./drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dsc/qp_tables.h:389:18: warning: symbol 'qp_table_422_12bpc_max' was not declared. Should it be static? ./drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dsc/qp_tables.h:430:18: warning: symbol 'qp_table_444_12bpc_max' was not declared. Should it be static? ./drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dsc/qp_tables.h:495:18: warning: symbol 'qp_table_420_8bpc_min' was not declared. Should it be static? ./drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dsc/qp_tables.h:516:18: warning: symbol 'qp_table_422_8bpc_min' was not declared. Should it be static? ./drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dsc/qp_tables.h:541:18: warning: symbol 'qp_table_422_10bpc_max' was not declared. Should it be static? ./drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dsc/qp_tables.h:574:16: warning: symbol 'qp_table_420_10bpc_max' was not declared. Should it be static? ./drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dsc/qp_tables.h:601:18: warning: symbol 'qp_table_420_10bpc_min' was not declared. Should it be static? ./drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dsc/qp_tables.h:628:18: warning: symbol 'qp_table_444_10bpc_max' was not declared. Should it be static? ./drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dsc/qp_tables.h:681:18: warning: symbol 'qp_table_422_8bpc_max' was not declared. Should it be static? Signed-off-by: ruanjinjie <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-10-24drm/amdgpu: fix sdma doorbell init ordering on APUsAlex Deucher2-5/+21
Commit 8795e182b02d ("PCI/portdrv: Don't disable AER reporting in get_port_device_capability()") uncovered a bug in amdgpu that required a reordering of the driver init sequence to avoid accessing a special register on the GPU before it was properly set up leading to an PCI AER error. This reordering uncovered a different hw programming ordering dependency in some APUs where the SDMA doorbells need to be programmed before the GFX doorbells. To fix this, move the SDMA doorbell programming back into the soc15 common code, but use the actual doorbell range values directly rather than the values stored in the ring structure since those will not be initialized at this point. This is a partial revert, but with the doorbell assignment fixed so the proper doorbell index is set before it's used. Fixes: e3163bc8ffdfdb ("drm/amdgpu: move nbio sdma_doorbell_range() into sdma code for vega") Acked-by: Christian König <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2022-10-24drm/amd/display: Don't return false if no streamAlvin Lee1-1/+1
pipe_ctx[i] exists even if the pipe is not in use. If the pipe is not in use it will always have a null stream, so don't return false in this case. Tested-by: Daniel Wheeler <[email protected]> Reviewed-by: Rodrigo Siqueira <[email protected]> Acked-by: Qingqing Zhuo <[email protected]> Signed-off-by: Alvin Lee <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-10-24drm/amd/display: Remove wrong pipe control lockRodrigo Siqueira1-11/+1
When using a device based on DCN32/321, we have an issue where a second 4k@60Hz display does not light up, and the system becomes unresponsive for a few minutes. In the debug process, it was possible to see a hang in the function dcn20_post_unlock_program_front_end in this part: for (j = 0; j < TIMEOUT_FOR_PIPE_ENABLE_MS*1000 && hubp->funcs->hubp_is_flip_pending(hubp); j++) mdelay(1); } The hubp_is_flip_pending always returns positive for waiting pending flips which is a symptom of pipe hang. Additionally, the dmesg log shows this message after a few minutes: BUG: soft lockup - CPU#4 stuck for 26s! ... [ +0.000003] dcn20_post_unlock_program_front_end+0x112/0x340 [amdgpu] [ +0.000171] dc_commit_state_no_check+0x63d/0xbf0 [amdgpu] [ +0.000155] ? dc_validate_global_state+0x358/0x3d0 [amdgpu] [ +0.000154] dc_commit_state+0xe2/0xf0 [amdgpu] This confirmed the hypothesis that we had a pipe hanging somewhere. Next, after checking the ftrace entries, we have the below weird sequence: [..] 2) | dcn10_lock_all_pipes [amdgpu]() { 2) 0.120 us | optc1_is_tg_enabled [amdgpu](); 2) | dcn20_pipe_control_lock [amdgpu]() { 2) | dc_dmub_srv_clear_inbox0_ack [amdgpu]() { 2) 0.121 us | amdgpu_dm_dmub_reg_write [amdgpu](); 2) 0.551 us | } 2) | dc_dmub_srv_send_inbox0_cmd [amdgpu]() { 2) 0.110 us | amdgpu_dm_dmub_reg_write [amdgpu](); 2) 0.511 us | } 2) | dc_dmub_srv_wait_for_inbox0_ack [amdgpu]() { 2) 0.110 us | amdgpu_dm_dmub_reg_read [amdgpu](); 2) 0.110 us | amdgpu_dm_dmub_reg_read [amdgpu](); 2) 0.110 us | amdgpu_dm_dmub_reg_read [amdgpu](); 2) 0.110 us | amdgpu_dm_dmub_reg_read [amdgpu](); 2) 0.110 us | amdgpu_dm_dmub_reg_read [amdgpu](); 2) 0.110 us | amdgpu_dm_dmub_reg_read [amdgpu](); 2) 0.110 us | amdgpu_dm_dmub_reg_read [amdgpu](); [..] We are not expected to read from dmub register so many times and for so long. From the trace log, it was possible to identify that the function dcn20_pipe_control_lock was triggering the dmub operation when it was unnecessary and causing the hang issue. This commit drops the unnecessary dmub code and, consequently, fixes the second display not lighting up the issue. Tested-by: Daniel Wheeler <[email protected]> Acked-by: Qingqing Zhuo <[email protected]> Signed-off-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-10-24drm/amd/pm: allow gfxoff on gc_11_0_3Kenneth Feng2-0/+2
allow gfxoff on gc_11_0_3 Signed-off-by: Kenneth Feng <[email protected]> Reviewed-by: Yang Wang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-10-24drm/amd/display: Use update plane and stream routine for DCN32xRodrigo Siqueira1-0/+12
Sub-viewport (Subvp) feature is used for changing MCLK without causing any display artifact, requiring special treatment from the plane and stream perspective since DC needs to read data from the cache when using subvp. However, the function dc_commit_updates_for_stream does not provide all the support needed by this feature which will make this function legacy at some point. For this reason, this commit enables dc_update_planes_and_stream for ASICs that support this feature but preserves the old behavior for other ASICs. However, dc_update_planes_and_stream should replace dc_commit_updates_for_stream for all ASICs since it does most of the tasks executed by dc_commit_updates_for_stream with other extra operations, but we need to run tests before making this change. Reviewed-by: Harry Wentland <[email protected]> Signed-off-by: Rodrigo Siqueira <[email protected]> Co-developed-by: Aurabindo Pillai <[email protected]> Signed-off-by: Aurabindo Pillai <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-10-24drm/amd/display: Avoid ABM when ODM combine is enabled for eDPRodrigo Siqueira1-1/+11
ODM to combine on the eDP panel with ABM causes the color difference to the panel since the ABM module only sets one pipe. Hence, this commit blocks ABM in case of ODM combined on eDP. Reviewed-by: Harry Wentland <[email protected]> Signed-off-by: Rodrigo Siqueira <[email protected]> Co-developed-by: Aurabindo Pillai <[email protected]> Signed-off-by: Aurabindo Pillai <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-10-24drm/amd/display: Update OTG instance in the commit streamRodrigo Siqueira1-0/+6
OTG instance is not updated in dc_commit_state_no_check for newly committed streams because mode_change is not set. Notice that OTG update is part of the software state, and after hardware programming, it must be updated; for this reason, this commit updates the OTG offset right after hardware programming. Reviewed-by: Harry Wentland <[email protected]> Signed-off-by: Rodrigo Siqueira <[email protected]> Co-developed-by: Aurabindo Pillai <[email protected]> Signed-off-by: Aurabindo Pillai <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-10-24drm/amd/display: Handle seamless boot streamRodrigo Siqueira1-0/+15
A seamless boot stream has hardware resources assigned to it, and adding a new stream means rebuilding the current assignment. It is desirable to avoid this situation since it may cause light-up issues on the VGA monitor on USB-C. This commit swaps the seamless boot stream to pipe 0 (if necessary) to ensure that the pipe context matches. Reviewed-by: Harry Wentland <[email protected]> Signed-off-by: Rodrigo Siqueira <[email protected]> Co-developed-by: Aurabindo Pillai <[email protected]> Signed-off-by: Aurabindo Pillai <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-10-24drm/amd/display: Add function for validate and update new streamRodrigo Siqueira3-14/+227
DC stream can be seen as a representation of the DCN backend or the data struct that represents the center of the display pipeline. The front end (i.e., planes) is connected to the DC stream, and in its turn, streams are connected to the DC link. Due to this dynamic, DC must handle the following scenarios: 1. A stream is removed; 2. A new stream is created; 3. An unchanged stream had some updates on its planes. These combinations require that the new stream data struct become updated and has a valid global state. For handling multiple corner cases associated with stream operations, this commit introduces a function dedicated to manipulating stream changes and invokes the state validation function after that. Reviewed-by: Harry Wentland <[email protected]> Signed-off-by: Rodrigo Siqueira <[email protected]> Co-developed-by: Aurabindo Pillai <[email protected]> Signed-off-by: Aurabindo Pillai <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-10-24drm/amd/display: Handle virtual hardware detectRodrigo Siqueira1-0/+3
If virtual hardware is detected, there is no reason to run the full dc_commit_streams process, and DC can return true immediately. Reviewed-by: Harry Wentland <[email protected]> Signed-off-by: Rodrigo Siqueira <[email protected]> Co-developed-by: Aurabindo Pillai <[email protected]> Signed-off-by: Aurabindo Pillai <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-10-24drm/amd/display: Include surface of unaffected streamsRodrigo Siqueira3-3/+28
The commit stream function does not include surfaces of unaffected streams, which may lead to some blank screens during mode change in some edge cases. This commit adds surfaces of unaffected streams followed by kernel-doc for documenting some of the fields that participate in this change. v2: squash in kerneldoc warning fix (Alex) Reviewed-by: Harry Wentland <[email protected]> Signed-off-by: Rodrigo Siqueira <[email protected]> Co-developed-by: Aurabindo Pillai <[email protected]> Signed-off-by: Aurabindo Pillai <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-10-24drm/amd/display: Copy DC context in the commit streamsRodrigo Siqueira2-9/+36
DC adds an instance of DML (which contains VBA) to each context, and multiple threads might write back to the global VBA resulting in data overwriting. To keep the consistency with other parts of the DC code, this commit changes dc_commit_streams to copy the current DC state, and as a result, it also changes the function signature to expect streams instead of a context. Reviewed-by: Harry Wentland <[email protected]> Signed-off-by: Rodrigo Siqueira <[email protected]> Co-developed-by: Aurabindo Pillai <[email protected]> Signed-off-by: Aurabindo Pillai <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-10-24drm/amd/display: Enable new commit sequence only for DCN32xRodrigo Siqueira2-9/+50
Change commit sequence will impact all ASICs. It is prudent to run this update in small steps to keep issues under control and avoid any potential regression. With this idea in mind, this commit is preparation work for the complete transition to the new commit sequence. To maintain this change manageable across multiple ASICs, this commit adds a new function named dc_commit_streams which is a copy of the dc_commit_state with some minor changes. Finally, inside the dc_commit_state, we check if we are using DCN32x or above and enable the new sequence only for those devices. Reviewed-by: Harry Wentland <[email protected]> Signed-off-by: Rodrigo Siqueira <[email protected]> Co-developed-by: Aurabindo Pillai <[email protected]> Signed-off-by: Aurabindo Pillai <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-10-24drm/amd/display: Rework context change checkRodrigo Siqueira1-7/+7
Context change is all about streams; for this reason, this commit renames context_changed to streams_changed. Additionally, to make this function more flexible, this commit changes the function signature to receive the stream array and the stream count as a parameter. Reviewed-by: Harry Wentland <[email protected]> Signed-off-by: Rodrigo Siqueira <[email protected]> Co-developed-by: Aurabindo Pillai <[email protected]> Signed-off-by: Aurabindo Pillai <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-10-24drm/amd/display: Check if link state is validRodrigo Siqueira1-0/+2
The link state is set to false if there is no link and local sink. Even though the stream state may not change, it is desirable to commit the new stream when HPD goes low to high. Reviewed-by: Harry Wentland <[email protected]> Signed-off-by: Rodrigo Siqueira <[email protected]> Co-developed-by: Aurabindo Pillai <[email protected]> Signed-off-by: Aurabindo Pillai <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-10-24drm/amdkfd: Fix memory leak in kfd_mem_dmamap_userptr()Rafael Mendonca1-3/+3
If the number of pages from the userptr BO differs from the SG BO then the allocated memory for the SG table doesn't get freed before returning -EINVAL, which may lead to a memory leak in some error paths. Fix this by checking the number of pages before allocating memory for the SG table. Fixes: 264fb4d332f5 ("drm/amdgpu: Add multi-GPU DMA mapping helpers") Signed-off-by: Rafael Mendonca <[email protected]> Reviewed-by: Felix Kuehling <[email protected]> Signed-off-by: Felix Kuehling <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-10-24drm/amdgpu: Remove ATC L2 access for MMHUB 2.1.xLijo Lazar1-20/+8
MMHUB 2.1.x versions don't have ATCL2. Remove accesses to ATCL2 registers. Since they are non-existing registers, read access will cause a 'Completer Abort' and gets reported when AER is enabled with the below patch. Tagging with the patch so that this is backported along with it. v2: squash in uninitialized warning fix (Nathan Chancellor) Fixes: 8795e182b02d ("PCI/portdrv: Don't disable AER reporting in get_port_device_capability()") Signed-off-by: Lijo Lazar <[email protected]> Reviewed-by: Guchun Chen <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2022-10-24drm/i915/gt: use intel_uncore_rmw when appropriateAndrzej Hajda1-3/+1
This patch replaces all occurences of the form intel_uncore_write(reg, intel_uncore_read(reg) OP val) with intel_uncore_rmw. Signed-off-by: Andrzej Hajda <[email protected]> Reviewed-by: Ville Syrjälä <[email protected]> Reviewed-by: Andi Shyti <[email protected]> Signed-off-by: Andi Shyti <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2022-10-24drm/i915: use intel_uncore_rmw when appropriateAndrzej Hajda1-121/+66
This patch replaces all occurences of the form intel_uncore_write(reg, intel_uncore_read(reg) OP val) with intel_uncore_rmw. Signed-off-by: Andrzej Hajda <[email protected]> Reviewed-by: Ville Syrjälä <[email protected]> Reviewed-by: Andi Shyti <[email protected]> Signed-off-by: Andi Shyti <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2022-10-24drm/bridge: it6505: Improve synchronization between extcon subsystemPin-yen Lin1-7/+11
Originally, the it6505 relies on a short sleep in the IRQ handler and a long sleep to make sure it6505->lane_swap and it6505->lane_count is configured in it6505_extcon_work and it6505_detect, respectively. Use completion and additional DPCD read to remove the unnecessary waits, and use a different lock for it6505_extcon_work and the threaded IRQ handler because they no longer need to run exclusively. The wait time of the completion is usually less than 10ms in local experiments, but leave it larger here just in case. Signed-off-by: Pin-yen Lin <[email protected]> Reviewed-by: Robert Foss <[email protected]> Signed-off-by: Robert Foss <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2022-10-24drm/bridge: it6505: Setup links in it6505_irq_hpdPin-yen Lin1-45/+35
Move the DPCD read and link setup steps to HPD IRQ handler to remove an unnecessary dependency between .detect callback and the HPD IRQ handler before registering it6505 as a DRM bridge. This is safe because there is always a .detect call after each HPD IRQ handler triggered by the drm_helper_hpd_irq_event call. Signed-off-by: Pin-yen Lin <[email protected]> Reviewed-by: Robert Foss <[email protected]> Signed-off-by: Robert Foss <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2022-10-24drm/bridge: it6505: Initialize AUX channel in it6505_i2c_probePin-yen Lin1-3/+5
During device boot, the HPD interrupt could be triggered before the DRM subsystem registers it6505 as a DRM bridge. In such cases, the driver tries to access AUX channel and causes NULL pointer dereference. Initializing the AUX channel earlier to prevent such error. Fixes: b5c84a9edcd4 ("drm/bridge: add it6505 driver") Signed-off-by: Pin-yen Lin <[email protected]> Reviewed-by: Robert Foss <[email protected]> Signed-off-by: Robert Foss <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2022-10-24gpu/drm: fix repeated words in commentswangjianli1-1/+1
Delete the redundant word 'the'. Signed-off-by: wangjianli <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2022-10-24gpu/drm: fix repeated words in commentswangjianli1-1/+1
Delete the redundant word 'the'. Signed-off-by: wangjianli <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2022-10-24drm/vc4: Fix spelling mistake "mmaping" -> "mmapping"Colin Ian King1-2/+2
There are a couple of spelling mistakes in DRM_DEBUG messages. Fix them. Signed-off-by: Colin Ian King <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2022-10-23Linux 6.1-rc2Linus Torvalds1-1/+1
2022-10-23Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds18-99/+180
Pull kvm fixes from Paolo Bonzini: "RISC-V: - Fix compilation without RISCV_ISA_ZICBOM - Fix kvm_riscv_vcpu_timer_pending() for Sstc ARM: - Fix a bug preventing restoring an ITS containing mappings for very large and very sparse device topology - Work around a relocation handling error when compiling the nVHE object with profile optimisation - Fix for stage-2 invalidation holding the VM MMU lock for too long by limiting the walk to the largest block mapping size - Enable stack protection and branch profiling for VHE - Two selftest fixes x86: - add compat implementation for KVM_X86_SET_MSR_FILTER ioctl selftests: - synchronize includes between include/uapi and tools/include/uapi" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: tools: include: sync include/api/linux/kvm.h KVM: x86: Add compat handler for KVM_X86_SET_MSR_FILTER KVM: x86: Copy filter arg outside kvm_vm_ioctl_set_msr_filter() kvm: Add support for arch compat vm ioctls RISC-V: KVM: Fix kvm_riscv_vcpu_timer_pending() for Sstc RISC-V: Fix compilation without RISCV_ISA_ZICBOM KVM: arm64: vgic: Fix exit condition in scan_its_table() KVM: arm64: nvhe: Fix build with profile optimization KVM: selftests: Fix number of pages for memory slot in memslot_modification_stress_test KVM: arm64: selftests: Fix multiple versions of GIC creation KVM: arm64: Enable stack protection and branch profiling for VHE KVM: arm64: Limit stage2_apply_range() batch size to largest block KVM: arm64: Work out supported block level at compile time
2022-10-23Revert "mfd: syscon: Remove repetition of the regmap_get_val_endian()"Jason A. Donenfeld1-0/+8
This reverts commit 72a95859728a7866522e6633818bebc1c2519b17. It broke reboots on big-endian MIPS and MIPS64 malta QEMU instances, which use the syscon driver. Little-endian is not effected, which means likely it's important to handle regmap_get_val_endian() in this function after all. Fixes: 72a95859728a ("mfd: syscon: Remove repetition of the regmap_get_val_endian()") Reviewed-by: Andy Shevchenko <[email protected]> Cc: Lee Jones <[email protected]> Signed-off-by: Jason A. Donenfeld <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2022-10-23kernel/utsname_sysctl.c: Fix hostname pollingLinus Torvalds2-0/+2
Commit bfca3dd3d068 ("kernel/utsname_sysctl.c: print kernel arch") added a new entry to the uts_kern_table[] array, but didn't update the UTS_PROC_xyz enumerators of older entries, breaking anything that used them. Which is admittedly not many cases: it's really just the two uses of uts_proc_notify() in kernel/sys.c. But apparently journald-systemd actually uses this to detect hostname changes. Reported-by: Torsten Hilbrich <[email protected]> Fixes: bfca3dd3d068 ("kernel/utsname_sysctl.c: print kernel arch") Link: https://lore.kernel.org/lkml/[email protected]/ Link: https://linux-regtracking.leemhuis.info/regzbot/regression/[email protected]/ Cc: Petr Vorel <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2022-10-23Merge tag 'perf_urgent_for_v6.1_rc2' of ↵Linus Torvalds5-46/+163
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Borislav Petkov: - Fix raw data handling when perf events are used in bpf - Rework how SIGTRAPs get delivered to events to address a bunch of problems with it. Add a selftest for that too * tag 'perf_urgent_for_v6.1_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: bpf: Fix sample_flags for bpf_perf_event_output selftests/perf_events: Add a SIGTRAP stress test with disables perf: Fix missing SIGTRAPs
2022-10-23Merge tag 'sched_urgent_for_v6.1_rc2' of ↵Linus Torvalds4-29/+35
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes from Borislav Petkov: - Adjust code to not trip up CFI - Fix sched group cookie matching * tag 'sched_urgent_for_v6.1_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched: Introduce struct balance_callback to avoid CFI mismatches sched/core: Fix comparison in sched_group_cookie_match()
2022-10-23Merge tag 'objtool_urgent_for_v6.1_rc2' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull objtool fix from Borislav Petkov: - Fix ORC stack unwinding when GCOV is enabled * tag 'objtool_urgent_for_v6.1_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/unwind/orc: Fix unreliable stack dump with gcov
2022-10-23Merge tag 'x86_urgent_for_v6.0_rc2' of ↵Linus Torvalds11-86/+122
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Borislav Petkov: "As usually the case, right after a major release, the tip urgent branches accumulate a couple more fixes than normal. And here is the x86, a bit bigger, urgent pile. - Use the correct CPU capability clearing function on the error path in Intel perf LBR - A CFI fix to ftrace along with a simplification - Adjust handling of zero capacity bit mask for resctrl cache allocation on AMD - A fix to the AMD microcode loader to attempt patch application on every logical thread - A couple of topology fixes to handle CPUID leaf 0x1f enumeration info properly - Drop a -mabi=ms compiler option check as both compilers support it now anyway - A couple of fixes to how the initial, statically allocated FPU buffer state is setup and its interaction with dynamic states at runtime" * tag 'x86_urgent_for_v6.0_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/fpu: Fix copy_xstate_to_uabi() to copy init states correctly perf/x86/intel/lbr: Use setup_clear_cpu_cap() instead of clear_cpu_cap() ftrace,kcfi: Separate ftrace_stub() and ftrace_stub_graph() x86/ftrace: Remove ftrace_epilogue() x86/resctrl: Fix min_cbm_bits for AMD x86/microcode/AMD: Apply the patch early on every logical thread x86/topology: Fix duplicated core ID within a package x86/topology: Fix multiple packages shown on a single-package system hwmon/coretemp: Handle large core ID value x86/Kconfig: Drop check for -mabi=ms for CONFIG_EFI_STUB x86/fpu: Exclude dynamic states from init_fpstate x86/fpu: Fix the init_fpstate size check with the actual size x86/fpu: Configure init_fpstate attributes orderly
2022-10-23Merge tag 'io_uring-6.1-2022-10-22' of git://git.kernel.dk/linuxLinus Torvalds4-0/+7
Pull io_uring follow-up from Jens Axboe: "Currently the zero-copy has automatic fallback to normal transmit, and it was decided that it'd be cleaner to return an error instead if the socket type doesn't support it. Zero-copy does work with UDP and TCP, it's more of a future proofing kind of thing (eg for samba)" * tag 'io_uring-6.1-2022-10-22' of git://git.kernel.dk/linux: io_uring/net: fail zc sendmsg when unsupported by socket io_uring/net: fail zc send when unsupported by socket net: flag sockets supporting msghdr originated zerocopy
2022-10-22Merge tag 'hwmon-for-v6.1-rc2' of ↵Linus Torvalds3-2/+8
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: - corsair-psu: Fix typo in USB id description, and add USB ID for new PSU - pwm-fan: Fix fan power handling when disabling fan control * tag 'hwmon-for-v6.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (corsair-psu) Add USB id of the new HX1500i psu hwmon: (pwm-fan) Explicitly switch off fan power when setting pwm1_enable to 0 hwmon: (corsair-psu) fix typo in USB id description
2022-10-22Merge tag 'i2c-for-6.1-rc2' of ↵Linus Torvalds6-16/+12
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "RPM fix for qcom-cci, platform module alias for xiic, build warning fix for mlxbf, typo fixes in comments" * tag 'i2c-for-6.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: mlxbf: depend on ACPI; clean away ifdeffage i2c: fix spelling typos in comments i2c: qcom-cci: Fix ordering of pm_runtime_xx and i2c_add_adapter i2c: xiic: Add platform module alias
2022-10-22Merge tag 'pci-v6.1-fixes-2' of ↵Linus Torvalds2-5/+10
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull pci fixes from Bjorn Helgaas: - Revert a simplification that broke pci-tegra due to a masking error - Update MAINTAINERS for Kishon's email address change and TI DRA7XX/J721E maintainer change * tag 'pci-v6.1-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: MAINTAINERS: Update Kishon's email address in PCI endpoint subsystem MAINTAINERS: Add Vignesh Raghavendra as maintainer of TI DRA7XX/J721E PCI driver Revert "PCI: tegra: Use PCI_CONF1_EXT_ADDRESS() macro"
2022-10-22Merge tag 'media/v6.1-2' of ↵Linus Torvalds132-3873/+3193
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull missed media updates from Mauro Carvalho Chehab: "It seems I screwed-up my previous pull request: it ends up that only half of the media patches that were in linux-next got merged in -rc1. The script which creates the signed tags silently failed due to 5.19->6.0 so it ended generating a tag with incomplete stuff. So here are the missing parts: - a DVB core security fix - lots of fixes and cleanups for atomisp staging driver - old drivers that are VB1 are being moved to staging to be deprecated - several driver updates - mostly for embedded systems, but there are also some things addressing issues with some PC webcams, in the UVC video driver" * tag 'media/v6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (163 commits) media: sun6i-csi: Move csi buffer definition to main header file media: sun6i-csi: Introduce and use video helper functions media: sun6i-csi: Add media ops with link notify callback media: sun6i-csi: Remove controls handler from the driver media: sun6i-csi: Register the media device after creation media: sun6i-csi: Pass and store csi device directly in video code media: sun6i-csi: Tidy up video code media: sun6i-csi: Tidy up v4l2 code media: sun6i-csi: Tidy up Kconfig media: sun6i-csi: Use runtime pm for clocks and reset media: sun6i-csi: Define and use variant to get module clock rate media: sun6i-csi: Always set exclusive module clock rate media: sun6i-csi: Tidy up platform code media: sun6i-csi: Refactor main driver data structures media: sun6i-csi: Define and use driver name and (reworked) description media: cedrus: Add a Kconfig dependency on RESET_CONTROLLER media: sun8i-rotate: Add a Kconfig dependency on RESET_CONTROLLER media: sun8i-di: Add a Kconfig dependency on RESET_CONTROLLER media: sun4i-csi: Add a Kconfig dependency on RESET_CONTROLLER media: sun6i-csi: Add a Kconfig dependency on RESET_CONTROLLER ...
2022-10-22io_uring/net: fail zc sendmsg when unsupported by socketPavel Begunkov1-0/+2
The previous patch fails zerocopy send requests for protocols that don't support it, do the same for zerocopy sendmsg. Signed-off-by: Pavel Begunkov <[email protected]> Link: https://lore.kernel.org/r/0854e7bb4c3d810a48ec8b5853e2f61af36a0467.1666346426.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <[email protected]>
2022-10-22io_uring/net: fail zc send when unsupported by socketPavel Begunkov1-0/+2
If a protocol doesn't support zerocopy it will silently fall back to copying. This type of behaviour has always been a source of troubles so it's better to fail such requests instead. Cc: <[email protected]> # 6.0 Signed-off-by: Pavel Begunkov <[email protected]> Link: https://lore.kernel.org/r/2db3c7f16bb6efab4b04569cd16e6242b40c5cb3.1666346426.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <[email protected]>
2022-10-22net: flag sockets supporting msghdr originated zerocopyPavel Begunkov3-0/+3
We need an efficient way in io_uring to check whether a socket supports zerocopy with msghdr provided ubuf_info. Add a new flag into the struct socket flags fields. Cc: <[email protected]> # 6.0 Signed-off-by: Pavel Begunkov <[email protected]> Acked-by: Jakub Kicinski <[email protected]> Link: https://lore.kernel.org/r/3dafafab822b1c66308bb58a0ac738b1e3f53f74.1666346426.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <[email protected]>
2022-10-22hwmon: (corsair-psu) Add USB id of the new HX1500i psuWilken Gottwalt2-0/+3
Also update the documentation accordingly. Signed-off-by: Wilken Gottwalt <[email protected]> Link: https://lore.kernel.org/r/Y0FghqQCHG/[email protected] Signed-off-by: Guenter Roeck <[email protected]>
2022-10-22tools: include: sync include/api/linux/kvm.hPaolo Bonzini1-0/+1
Provide a definition of KVM_CAP_DIRTY_LOG_RING_ACQ_REL. Fixes: 17601bfed909 ("KVM: Add KVM_CAP_DIRTY_LOG_RING_ACQ_REL capability and config option") Cc: Marc Zyngier <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-10-22drm/i915: Introduce intel_crtc_needs_color_update()Ville Syrjälä4-19/+16
Add a common helper to answer the question "do we need to update color management stuff?". Reviewed-by: Jani Nikula <[email protected]> Signed-off-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2022-10-22drm/i915: Don't flag both full modeset and fastset at the same timeVille Syrjälä1-1/+8
Be consistent in whether we flag a full modeset or a fastset for the pipe. intel_modeset_all_pipes() would seem to be the only codepath not getting this right. The other case is when we flag the fastset initially, currently we just clear the mode_changed flag and set the update_pipe flag. But we could still have connectors_changed==true or active_changed==true forcing a full modeset anyway. So check for that after clearing the mode_changed flag. And let's add a WARN to make sure we did get it right. v2: Deal with {connectors,active}_changed Reviewed-by: Jani Nikula <[email protected]> #v1 Signed-off-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2022-10-22drm/i915: Remove some local 'mode_changed' boolsVille Syrjälä1-8/+6
These 'mode_changed' booleans aren't very helpful. Just replace them with direct intel_crtc_needs_modeset() calls which is more descriptive. Reviewed-by: Jani Nikula <[email protected]> Signed-off-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2022-10-22drm/i915: Introduce intel_crtc_needs_fastset()Ville Syrjälä7-21/+33
Replace the somewhat obscure crtc_state.update_pipe checks with a more descriptive thing. Also nicely matches the intel_crtc_needs_modeset() counterpart for full modesets. v2: Handle one more case in the fbc code Reviewed-by: Jani Nikula <[email protected]> #v1 Signed-off-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Powered by cgit, Gruvboxed by Blaster4385.