| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Signed-off-by: Siva Reddy Kallam <[email protected]>
Reviewed-by: Michael Chan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Testing has uncovered a failure case that is not handled properly. In the
event that a login fails and we are not able to recover on the spot, we
return 0 from do_reset, preventing any error recovery code from being
triggered. Additionally, the state is set to "probed" meaning that when we
are able to trigger the error recovery, the driver always comes up in the
probed state. To handle the case properly, we need to return a failure code
here and set the adapter state to the state that we entered the reset in
indicating the state that we would like to come out of the recovery reset
in.
Signed-off-by: John Allen <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The skb size calculation in lan78xx_tx_bh is in race with the start_xmit,
which could lead to rare kernel oopses. So protect the whole skb walk with
a spin lock. As a benefit we can unlink the skb directly.
This patch was tested on Raspberry Pi 3B+
Link: https://github.com/raspberrypi/linux/issues/2608
Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet")
Cc: stable <[email protected]>
Signed-off-by: Floris Bos <[email protected]>
Signed-off-by: Stefan Wahren <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Eric reported that reverting the patch that fixed and simplified IPv6
multipath routes means reverting back to invalid userspace notifications.
eg.,
$ ip -6 route add 2001:db8:1::/64 nexthop dev eth0 nexthop dev eth1
only generates a single notification:
2001:db8:1::/64 dev eth0 metric 1024 pref medium
While working on a fix for this problem I found another case that is just
broken completely - a multipath route with a gateway followed by device
followed by gateway:
$ ip -6 ro add 2001:db8:103::/64
nexthop via 2001:db8:1::64
nexthop dev dummy2
nexthop via 2001:db8:3::64
In this case the device only route is dropped completely - no notification
to userpsace but no addition to the FIB either:
$ ip -6 ro ls
2001:db8:1::/64 dev dummy1 proto kernel metric 256 pref medium
2001:db8:2::/64 dev dummy2 proto kernel metric 256 pref medium
2001:db8:3::/64 dev dummy3 proto kernel metric 256 pref medium
2001:db8:103::/64 metric 1024
nexthop via 2001:db8:1::64 dev dummy1 weight 1
nexthop via 2001:db8:3::64 dev dummy3 weight 1 pref medium
fe80::/64 dev dummy1 proto kernel metric 256 pref medium
fe80::/64 dev dummy2 proto kernel metric 256 pref medium
fe80::/64 dev dummy3 proto kernel metric 256 pref medium
Really, IPv6 multipath is just FUBAR'ed beyond repair when it comes to
device only routes, so do not allow it all.
This change will break any scripts relying on the mpath api for insert,
but I don't see any other way to handle the permutations. Besides, since
the routes are added to the FIB as standalone (non-multipath) routes the
kernel is not doing what the user requested, so it might as well tell the
user that.
Reported-by: Eric Dumazet <[email protected]>
Signed-off-by: David Ahern <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Correct previous bad attempt at allowing sockets to come out of TCP
repair without sending window probes. To avoid changing size of
the repair variable in struct tcp_sock, this lets the decision for
sending probes or not to be made when coming out of repair by
introducing two ways to turn it off.
v2:
* Remove erroneous comment; defines now make behavior clear
Fixes: 70b7ff130224 ("tcp: allow user to create repair socket without window probes")
Signed-off-by: Stefan Baranoff <[email protected]>
Signed-off-by: Eric Dumazet <[email protected]>
Acked-by: Andrei Vagin <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
When a new rx packet arrives, the rx path will decide whether to reuse
the remainder of the page or not according to one of the below conditions:
1. frag_info->frag_stride == PAGE_SIZE / 2
2. frags->page_offset + frag_info->frag_size > PAGE_SIZE;
The first condition is no met for when XDP is set.
For XDP, page_offset is always set to priv->rx_headroom which is
XDP_PACKET_HEADROOM and frag_info->frag_size is around mtu size + some
padding, still the 2nd release condition will hold since
XDP_PACKET_HEADROOM + 1536 < PAGE_SIZE, as a result the page will not
be released and will be _wrongly_ reused for next free rx descriptor.
In XDP there is an assumption to have a page per packet and reuse can
break such assumption and might cause packet data corruptions.
Fix this by adding an extra condition (!priv->rx_headroom) to the 2nd
case to avoid page reuse when XDP is set, since rx_headroom is set to 0
for non XDP setup and set to XDP_PACKET_HEADROOM for XDP setup.
No additional cache line is required for the new condition.
Fixes: 34db548bfb95 ("mlx4: add page recycling in receive path")
Signed-off-by: Saeed Mahameed <[email protected]>
Signed-off-by: Tariq Toukan <[email protected]>
Suggested-by: Martin KaFai Lau <[email protected]>
CC: Eric Dumazet <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
CC [M] drivers/net/ethernet/freescale/fman/fman.o
In file included from ../drivers/net/ethernet/freescale/fman/fman.c:35:
../include/linux/fsl/guts.h: In function 'guts_set_dmacr':
../include/linux/fsl/guts.h:165:2: error: implicit declaration of function 'clrsetbits_be32' [-Werror=implicit-function-declaration]
clrsetbits_be32(&guts->dmacr, 3 << shift, device << shift);
^~~~~~~~~~~~~~~
Signed-off-by: Randy Dunlap <[email protected]>
Cc: Madalin Bucur <[email protected]>
Cc: [email protected]
Cc: [email protected]
Signed-off-by: David S. Miller <[email protected]>
|
|
The netvsc device may need to fallback to running in single queue
mode if host side only wants to support single queue.
Recent change for handling mtu broke this in setup logic.
Reported-by: Dan Carpenter <[email protected]>
Fixes: 3ffe64f1a641 ("hv_netvsc: split sub-channel setup into async and sync")
Signed-off-by: Stephen Hemminger <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
During a device failover, there may be latency between the loss
of the current backing device and a notification from firmware that
a failover has occurred. This latency can result in a large amount of
error printouts as firmware returns outgoing traffic with a generic
error code. These are not necessarily errors in this case as the
firmware is busy swapping in a new backing adapter and is not ready
to send packets yet. This patch reclassifies those error codes as
warnings with an explanation that a failover may be pending. All
other return codes will be considered errors.
Signed-off-by: Thomas Falcon <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Commit adc176c54722 ("ipv6 addrconf: Implemented enhanced DAD (RFC7527)")
added enhanced DAD with a nonce length of 6 bytes. However, RFC7527
doesn't specify the length of the nonce, other than being 6 + 8*k bytes,
with integer k >= 0 (RFC3971 5.3.2). The current implementation simply
assumes that the nonce will always be 6 bytes, but others systems are
free to choose different sizes.
If another system sends a nonce of different length but with the same 6
bytes prefix, it shouldn't be considered as the same nonce. Thus, check
that the length of the received nonce is the same as the length we sent.
Ugly scapy test script running on veth0:
def loop():
pkt=sniff(iface="veth0", filter="icmp6", count=1)
pkt = pkt[0]
b = bytearray(pkt[Raw].load)
b[1] += 1
b += b'\xde\xad\xbe\xef\xde\xad\xbe\xef'
pkt[Raw].load = bytes(b)
pkt[IPv6].plen += 8
# fixup checksum after modifying the payload
pkt[IPv6].payload.cksum -= 0x3b44
if pkt[IPv6].payload.cksum < 0:
pkt[IPv6].payload.cksum += 0xffff
sendp(pkt, iface="veth0")
This should result in DAD failure for any address added to veth0's peer,
but is currently ignored.
Fixes: adc176c54722 ("ipv6 addrconf: Implemented enhanced DAD (RFC7527)")
Signed-off-by: Sabrina Dubroca <[email protected]>
Reviewed-by: Stefano Brivio <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
This patch remove the following documentation warning
drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c:103: warning: Excess function parameter 'priv' description in 'stmmac_axi_setup'
It was introduced in commit afea03656add7 ("stmmac: rework DMA bus setting and introduce new platform AXI structure")
Signed-off-by: Corentin Labbe <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
This patch fix a typo in the word Describe
Signed-off-by: Corentin Labbe <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
A KASAN:use-after-free bug was found related to ip6-erspan
while running selftests/net/ip6_gre_headroom.sh
It happens because of following sequence:
- ipv6hdr pointer is obtained from skb
- skb_cow_head() is called, skb->head memory is reallocated
- old data is accessed using ipv6hdr pointer
skb_cow_head() call was added in e41c7c68ea77 ("ip6erspan: make sure
enough headroom at xmit."), but looking at the history there was a
chance of similar bug because gre_handle_offloads() and pskb_trim()
can also reallocate skb->head memory. Fixes tag points to commit
which introduced possibility of this bug.
This patch moves ipv6hdr pointer assignment after skb_cow_head() call.
Fixes: 5a963eb61b7c ("ip6_gre: Add ERSPAN native tunnel support")
Signed-off-by: Prashant Bhole <[email protected]>
Reviewed-by: Greg Rose <[email protected]>
Acked-by: William Tu <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
On XDP_TX we need to free up the frame only when tun_xdp_tx() returns a
negative value. A positive value indicates that the packet is
successfully enqueued to the ptr_ring, so freeing the page causes
use-after-free.
Fixes: 735fc4054b3a ("xdp: change ndo_xdp_xmit API to support bulking")
Signed-off-by: Toshiaki Makita <[email protected]>
Acked-by: Jason Wang <[email protected]>
Acked-by: Jesper Dangaard Brouer <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
This patch fixes a spelling typo in bonding.txt
Signed-off-by: Masanari Iida <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
In the zerocopy sendmsg() path, there are error checks to revert
the zerocopy if we get any error code. syzkaller has discovered
that tls_push_record can return -ECONNRESET, which is fatal, and
happens after the point at which it is safe to revert the iter,
as we've already passed the memory to do_tcp_sendpages.
Previously this code could return -ENOMEM and we would want to
revert the iter, but AFAIK this no longer returns ENOMEM after
a447da7d004 ("tls: fix waitall behavior in tls_sw_recvmsg"),
so we fail for all error codes.
Reported-by: [email protected]
Reported-by: [email protected]
Signed-off-by: Dave Watson <[email protected]>
Fixes: 3c4d7559159b ("tls: kernel TLS support")
Signed-off-by: David S. Miller <[email protected]>
|
|
Signed-off-by: Constantine Shulyupin <[email protected]>
Acked-by: Alexei Starovoitov <[email protected]>
Acked-by: Daniel Borkmann <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
My recent fix for dns_resolver_preparse() printing very long strings was
incomplete, as shown by syzbot which still managed to hit the
WARN_ONCE() in set_precision() by adding a crafted "dns_resolver" key:
precision 50001 too large
WARNING: CPU: 7 PID: 864 at lib/vsprintf.c:2164 vsnprintf+0x48a/0x5a0
The bug this time isn't just a printing bug, but also a logical error
when multiple options ("#"-separated strings) are given in the key
payload. Specifically, when separating an option string into name and
value, if there is no value then the name is incorrectly considered to
end at the end of the key payload, rather than the end of the current
option. This bypasses validation of the option length, and also means
that specifying multiple options is broken -- which presumably has gone
unnoticed as there is currently only one valid option anyway.
A similar problem also applied to option values, as the kstrtoul() when
parsing the "dnserror" option will read past the end of the current
option and into the next option.
Fix these bugs by correctly computing the length of the option name and
by copying the option value, null-terminated, into a temporary buffer.
Reproducer for the WARN_ONCE() that syzbot hit:
perl -e 'print "#A#", "\0" x 50000' | keyctl padd dns_resolver desc @s
Reproducer for "dnserror" option being parsed incorrectly (expected
behavior is to fail when seeing the unknown option "foo", actual
behavior was to read the dnserror value as "1#foo" and fail there):
perl -e 'print "#dnserror=1#foo\0"' | keyctl padd dns_resolver desc @s
Reported-by: syzbot <[email protected]>
Fixes: 4a2d789267e0 ("DNS: If the DNS server returns an error, allow that to be cached [ver #2]")
Signed-off-by: Eric Biggers <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Hangbin Liu says:
====================
multicast: init as INCLUDE when join SSM INCLUDE group
Based on RFC3376 5.1 and RFC3810 6.1, we should init as INCLUDE when join SSM
INCLUDE group. In my first version I only clear the group change record. But
this is not enough as when a new group join, it will init as EXCLUDE and
trigger an filter mode change in ip/ip6_mc_add_src(), which will clear all
source addresses' sf_crcount. This will prevent early joined address sending
state change records if multi source addresses joined at the same time.
In this v2 patchset, I fixed it by directly initializing the mode to INCLUDE
for SSM JOIN_SOURCE_GROUP. I also split the original patch into two separated
patches for IPv4 and IPv6.
Test: test by myself and customer.
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
This an IPv6 version patch of "ipv4/igmp: init group mode as INCLUDE when
join source group". From RFC3810, part 6.1:
If no per-interface state existed for that
multicast address before the change (i.e., the change consisted of
creating a new per-interface record), or if no state exists after the
change (i.e., the change consisted of deleting a per-interface
record), then the "non-existent" state is considered to have an
INCLUDE filter mode and an empty source list.
Which means a new multicast group should start with state IN(). Currently,
for MLDv2 SSM JOIN_SOURCE_GROUP mode, we first call ipv6_sock_mc_join(),
then ip6_mc_source(), which will trigger a TO_IN() message instead of
ALLOW().
The issue was exposed by commit a052517a8ff65 ("net/multicast: should not
send source list records when have filter mode change"). Before this change,
we sent both ALLOW(A) and TO_IN(A). Now, we only send TO_IN(A).
Fix it by adding a new parameter to init group mode. Also add some wrapper
functions to avoid changing too much code.
v1 -> v2:
In the first version I only cleared the group change record. But this is not
enough. Because when a new group join, it will init as EXCLUDE and trigger
a filter mode change in ip/ip6_mc_add_src(), which will clear all source
addresses sf_crcount. This will prevent early joined address sending state
change records if multi source addressed joined at the same time.
In v2 patch, I fixed it by directly initializing the mode to INCLUDE for SSM
JOIN_SOURCE_GROUP. I also split the original patch into two separated patches
for IPv4 and IPv6.
There is also a difference between v4 and v6 version. For IPv6, when the
interface goes down and up, we will send correct state change record with
unspecified IPv6 address (::) with function ipv6_mc_up(). But after DAD is
completed, we resend the change record TO_IN() in mld_send_initial_cr().
Fix it by sending ALLOW() for INCLUDE mode in mld_send_initial_cr().
Fixes: a052517a8ff65 ("net/multicast: should not send source list records when have filter mode change")
Reviewed-by: Stefano Brivio <[email protected]>
Signed-off-by: Hangbin Liu <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Based on RFC3376 5.1
If no interface
state existed for that multicast address before the change (i.e., the
change consisted of creating a new per-interface record), or if no
state exists after the change (i.e., the change consisted of deleting
a per-interface record), then the "non-existent" state is considered
to have a filter mode of INCLUDE and an empty source list.
Which means a new multicast group should start with state IN().
Function ip_mc_join_group() works correctly for IGMP ASM(Any-Source Multicast)
mode. It adds a group with state EX() and inits crcount to mc_qrv,
so the kernel will send a TO_EX() report message after adding group.
But for IGMPv3 SSM(Source-specific multicast) JOIN_SOURCE_GROUP mode, we
split the group joining into two steps. First we join the group like ASM,
i.e. via ip_mc_join_group(). So the state changes from IN() to EX().
Then we add the source-specific address with INCLUDE mode. So the state
changes from EX() to IN(A).
Before the first step sends a group change record, we finished the second
step. So we will only send the second change record. i.e. TO_IN(A).
Regarding the RFC stands, we should actually send an ALLOW(A) message for
SSM JOIN_SOURCE_GROUP as the state should mimic the 'IN() to IN(A)'
transition.
The issue was exposed by commit a052517a8ff65 ("net/multicast: should not
send source list records when have filter mode change"). Before this change,
we used to send both ALLOW(A) and TO_IN(A). After this change we only send
TO_IN(A).
Fix it by adding a new parameter to init group mode. Also add new wrapper
functions so we don't need to change too much code.
v1 -> v2:
In my first version I only cleared the group change record. But this is not
enough. Because when a new group join, it will init as EXCLUDE and trigger
an filter mode change in ip/ip6_mc_add_src(), which will clear all source
addresses' sf_crcount. This will prevent early joined address sending state
change records if multi source addressed joined at the same time.
In v2 patch, I fixed it by directly initializing the mode to INCLUDE for SSM
JOIN_SOURCE_GROUP. I also split the original patch into two separated patches
for IPv4 and IPv6.
Fixes: a052517a8ff65 ("net/multicast: should not send source list records when have filter mode change")
Reviewed-by: Stefano Brivio <[email protected]>
Signed-off-by: Hangbin Liu <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
- A slew of driver fixes for Mediatek mt7622
- Fix a direction inversion bug in the Ingenic driver
- Fix unsupported drive strength setting on the PFC r8a77970
- Off by one and NULL dereference fixes in the NSP driver
* tag 'pinctrl-v4.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: nsp: Fix potential NULL dereference
pinctrl: nsp: off by ones in nsp_pinmux_enable()
pinctrl: sh-pfc: r8a77970: remove SH_PFC_PIN_CFG_DRIVE_STRENGTH flag
pinctrl: ingenic: Fix inverted direction for < JZ4770
pinctrl: mt7622: fix a kernel panic when gpio-hog is being applied
pinctrl: mt7622: stop using the deprecated pinctrl_add_gpio_range
pinctrl: mt7622: fix that pinctrl_claim_hogs cannot work
pinctrl: mt7622: fix initialization sequence between eint and gpiochip
pinctrl: mt7622: fix error path on failing at groups building
|
|
Pull drm fixes from Dave Airlie:
- two AGP fixes in here
- a bunch of mostly amdgpu fixes
- sun4i build fix
- two armada fixes
- some tegra fixes
- one i915 core and one i915 gvt fix
* tag 'drm-fixes-2018-07-16-1' of git://anongit.freedesktop.org/drm/drm:
drm/amdgpu/pp/smu7: use a local variable for toc indexing
amd/dc/dce100: On dce100, set clocks to 0 on suspend
drm/amd/display: Convert 10kHz clks from PPLib into kHz for Vega
drm/amdgpu: Verify root PD is mapped into kernel address space (v4)
drm/amd/display: fix invalid function table override
drm/amdgpu: Reserve VM root shared fence slot for command submission (v3)
Revert "drm/amd/display: Don't return ddc result and read_bytes in same return value"
char: amd64-agp: Use 64-bit arithmetic instead of 32-bit
char: agp: Change return type to vm_fault_t
drm/i915: Fix hotplug irq ack on i965/g4x
drm/armada: fix irq handling
drm/armada: fix colorkey mode property
drm/tegra: Fix comparison operator for buffer size
gpu: host1x: Check whether size of unpin isn't 0
gpu: host1x: Skip IOMMU initialization if firewall is enabled
drm/sun4i: link in front-end code if needed
drm/i915/gvt: update vreg on inhibit context lri command
|
|
Moving zero_resv_unavail before memmap_init_zone(), caused a regression on
x86-32.
The cause is that we access struct pages before they are allocated when
CONFIG_FLAT_NODE_MEM_MAP is used.
free_area_init_nodes()
zero_resv_unavail()
mm_zero_struct_page(pfn_to_page(pfn)); <- struct page is not alloced
free_area_init_node()
if CONFIG_FLAT_NODE_MEM_MAP
alloc_node_mem_map()
memblock_virt_alloc_node_nopanic() <- struct page alloced here
On the other hand memblock_virt_alloc_node_nopanic() zeroes all the memory
that it returns, so we do not need to do zero_resv_unavail() here.
Fixes: e181ae0c5db9 ("mm: zero unavailable pages before memmap init")
Signed-off-by: Pavel Tatashin <[email protected]>
Tested-by: Matt Hart <[email protected]>
Acked-by: Michal Hocko <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
This adds some required quirk when uses headset or headphone on
Panasonic CF-SZ6.
Signed-off-by: YOKOTA Hiroshi <[email protected]>
Cc: <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
|
|
Audio mute led does not work on HP ProBook 455 G5,
this can be fixed by using CXT_FIXUP_MUTE_LED_GPIO to support it.
BugLink: https://bugs.launchpad.net/bugs/1781763
Reported-by: James Buren
Signed-off-by: Po-Hsu Lin <[email protected]>
Cc: <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
|
|
A comment in the review of the patch adding the phandle cache said that
the cache would have to be updated when modules are applied and removed.
This patch implements the cache updates.
Fixes: 0b3ce78e90fc ("of: cache phandle nodes to reduce cost of of_find_node_by_phandle()")
Reported-by: Alan Tull <[email protected]>
Suggested-by: Alan Tull <[email protected]>
Signed-off-by: Frank Rowand <[email protected]>
Signed-off-by: Rob Herring <[email protected]>
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
I already pulled the first fix, pull the GVT fixes.
- GVT fix for KBL vGPU hang to update virtual register from LRI.
Signed-off-by: Dave Airlie <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
into drm-fixes
Two armada fixes.
Signed-off-by: Dave Airlie <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
Fixes for v4.18-rc5:
- Single fix for a build error when the driver is builtin,
but the backend is a loadable module.
Signed-off-by: Dave Airlie <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
git://anongit.freedesktop.org/tegra/linux into drm-fixes
drm/tegra: Fixes for v4.18-rc5
This contains a couple of one- or two-line fixes for various minor
issues in the Tegra driver.
Signed-off-by: Dave Airlie <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
into drm-fixes
A few display and GPUVM fixes for 4.18.
A few more fixes for 4.18. Two display fixes and a fix to avoid a segfault if
the GPU does not power up properly on resume. These are on top of my pull
from earlier this week.
Signed-off-by: Dave Airlie <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
- Fix hotplug irq ack on i965/g4x (Ville)
Signed-off-by: Dave Airlie <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
- A fix for OMAP5 and DRA7 to make the branch predictor hardening
settings take proper effect on secondary cores
- Disable USB OTG on am3517 since current driver isn't working
- Fix thermal sensor register settings on Armada 38x
- Fix suspend/resume IRQs on pxa3xx
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: dts: am3517.dtsi: Disable reference to OMAP3 OTG controller
ARM: DRA7/OMAP5: Enable ACTLR[0] (Enable invalidates of BTB) for secondary cores
ARM: pxa: irq: fix handling of ICMR registers in suspend/resume
ARM: dts: armada-38x: use the new thermal binding
|
|
pvti_cpu0_va is the address of shared kvmclock data structure.
pvti_cpu0_va is currently kept unset (1) on 32 bit systems, (2) when
kvmclock vsyscall is disabled, and (3) if kvmclock is not stable.
This poses a problem, because kvm_ptp needs pvti_cpu0_va, but (1) can
work on 32 bit, (2) has little relation to the vsyscall, and (3) does
not need stable kvmclock (although kvmclock won't be used for system
clock if it's not stable, so kvm_ptp is pointless in that case).
Expose pvti_cpu0_va whenever kvmclock is enabled to allow all users to
work with it.
This fixes a regression found on Gentoo: https://bugs.gentoo.org/658544.
Fixes: 9f08890ab906 ("x86/pvclock: add setter for pvclock_pvti_cpu0_va")
Cc: [email protected]
Reported-by: Andreas Steinmetz <[email protected]>
Signed-off-by: Radim Krčmář <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Prevent a config where KVM_AMD=y and CRYPTO_DEV_CCP_DD=m thereby ensuring
that AMD Secure Processor device driver will be built-in when KVM_AMD is
also built-in.
v1->v2:
* Removed usage of 'imply' Kconfig option.
* Change patch commit message.
Fixes: 505c9e94d832 ("KVM: x86: prefer "depends on" to "select" for SEV")
Cc: <[email protected]> # 4.16.x
Signed-off-by: Janakarajan Natarajan <[email protected]>
Reviewed-by: Brijesh Singh <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
This exit qualification was inadvertently dropped when the two
VM-entry failure blocks were coalesced.
Fixes: e79f245ddec1 ("X86/KVM: Properly update 'tsc_offset' to represent the running guest")
Signed-off-by: Jim Mattson <[email protected]>
Reviewed-by: Krish Sadhukhan <[email protected]>
Reviewed-by: David Hildenbrand <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
When we switched from doing rdmsr() to reading FS/GS base values from
current->thread we completely forgot about legacy 32-bit userspaces which
we still support in KVM (why?). task->thread.{fsbase,gsbase} are only
synced for 64-bit processes, calling save_fsgs_for_kvm() and using
its result from current is illegal for legacy processes.
There's no ARCH_SET_FS/GS prctls for legacy applications. Base MSRs are,
however, not always equal to zero. Intel's manual says (3.4.4 Segment
Loading Instructions in IA-32e Mode):
"In order to set up compatibility mode for an application, segment-load
instructions (MOV to Sreg, POP Sreg) work normally in 64-bit mode. An
entry is read from the system descriptor table (GDT or LDT) and is loaded
in the hidden portion of the segment register.
...
The hidden descriptor register fields for FS.base and GS.base are
physically mapped to MSRs in order to load all address bits supported by
a 64-bit implementation.
"
The issue was found by strace test suite where 32-bit ioctl_kvm_run test
started segfaulting.
Reported-by: Dmitry V. Levin <[email protected]>
Bisected-by: Masatake YAMATO <[email protected]>
Fixes: 42b933b59721 ("x86/kvm/vmx: read MSR_{FS,KERNEL_GS}_BASE from current->thread")
Cc: [email protected]
Signed-off-by: Vitaly Kuznetsov <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
This lets userspace read the MSR_IA32_ARCH_CAPABILITIES and check that all
requested features are available on the host.
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC fixes from Alexandre Belloni:
"Two fixes for 4.18:
- an important core fix for RTCs using the core offsetting only one
driver is affected
- a fix for the error path of mrst"
* tag 'rtc-4.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
rtc: fix alarm read and set offset
rtc: mrst: fix error code in probe()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes
Two omap fixes for v4.18-rc cycle
Turns out the recent patches for ARM branch predictor hardening are
not working on omap5 and dra7 as planned because the secondary CPU
is parked to the bootrom code. We can't configure it in the bootloader.
So we must enable invalidates of BTB for omap5 and dra7 secondary
core in the kernel.
And there's a fix for reserved register access for am3517. The
usb otg module on am3517 is not the same as for other omap3.
* tag 'omap-for-v4.18/fixes-rc4-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: am3517.dtsi: Disable reference to OMAP3 OTG controller
ARM: DRA7/OMAP5: Enable ACTLR[0] (Enable invalidates of BTB) for secondary cores
Signed-off-by: Olof Johansson <[email protected]>
|
|
mvebu fixes for 4.18 (part 1)
Use the new thermal binding on Armada 38x allowing to use a driver fix
which is already part of the kernel.
* tag 'mvebu-fixes-4.18-1' of git://git.infradead.org/linux-mvebu:
ARM: dts: armada-38x: use the new thermal binding
Signed-off-by: Olof Johansson <[email protected]>
|
|
This is the fixes set for v4.18 cycle.
This is a fix for suspending all pxa3xx platforms, where high
number interrupts are not reenabled.
* tag 'pxa-fixes-4.18' of https://github.com/rjarzmik/linux:
ARM: pxa: irq: fix handling of ICMR registers in suspend/resume
Signed-off-by: Olof Johansson <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
"Two related fixes for a boot failure of Xen PV guests"
* tag 'for-linus-4.18-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen: setup pv irq ops vector earlier
xen: remove global bit from __default_kernel_pte_mask for pv guests
|
|
Pull block fix from Jens Axboe:
"Just a single regression fix (from 4.17) for bsg, fixing an EINVAL
return on non-data commands"
* tag 'for-linus-20180713' of git://git.kernel.dk/linux-block:
bsg: fix bogus EINVAL on non-data commands
|
|
Merge misc fixes from Andrew Morton:
"11 fixes"
* emailed patches form Andrew Morton <[email protected]>:
reiserfs: fix buffer overflow with long warning messages
checkpatch: fix duplicate invalid vsprintf pointer extension '%p<foo>' messages
mm: do not bug_on on incorrect length in __mm_populate()
mm/memblock.c: do not complain about top-down allocations for !MEMORY_HOTREMOVE
fs, elf: make sure to page align bss in load_elf_library
x86/purgatory: add missing FORCE to Makefile target
net/9p/client.c: put refcount of trans_mod in error case in parse_opts()
mm: allow arch to supply p??_free_tlb functions
autofs: fix slab out of bounds read in getname_kernel()
fs/proc/task_mmu.c: fix Locked field in /proc/pid/smaps*
mm: do not drop unused pages when userfaultd is running
|
|
ReiserFS prepares log messages into a 1024-byte buffer with no bounds
checks. Long messages, such as the "unknown mount option" warning when
userspace passes a crafted mount options string, overflow this buffer.
This causes KASAN to report a global-out-of-bounds write.
Fix it by truncating messages to the buffer size.
Link: http://lkml.kernel.org/r/[email protected]
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: [email protected]
Signed-off-by: Eric Biggers <[email protected]>
Reviewed-by: Andrew Morton <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Multiline statements with invalid %p<foo> uses produce multiple
warnings. Fix that.
e.g.:
$ cat t_block.c
void foo(void)
{
MY_DEBUG(drv->foo,
"%pk",
foo->boo);
}
$ ./scripts/checkpatch.pl -f t_block.c
WARNING: Missing or malformed SPDX-License-Identifier tag in line 1
#1: FILE: t_block.c:1:
+void foo(void)
WARNING: Invalid vsprintf pointer extension '%pk'
#3: FILE: t_block.c:3:
+ MY_DEBUG(drv->foo,
+ "%pk",
+ foo->boo);
WARNING: Invalid vsprintf pointer extension '%pk'
#3: FILE: t_block.c:3:
+ MY_DEBUG(drv->foo,
+ "%pk",
+ foo->boo);
total: 0 errors, 3 warnings, 6 lines checked
NOTE: For some of the reported defects, checkpatch may be able to
mechanically convert to the typical style using --fix or --fix-inplace.
t_block.c has style problems, please review.
NOTE: If any of the errors are false positives, please report
them to the maintainer, see CHECKPATCH in MAINTAINERS.
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Joe Perches <[email protected]>
Cc: "Tobin C. Harding" <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
syzbot has noticed that a specially crafted library can easily hit
VM_BUG_ON in __mm_populate
kernel BUG at mm/gup.c:1242!
invalid opcode: 0000 [#1] SMP
CPU: 2 PID: 9667 Comm: a.out Not tainted 4.18.0-rc3 #644
Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 05/19/2017
RIP: 0010:__mm_populate+0x1e2/0x1f0
Code: 55 d0 65 48 33 14 25 28 00 00 00 89 d8 75 21 48 83 c4 20 5b 41 5c 41 5d 41 5e 41 5f 5d c3 e8 75 18 f1 ff 0f 0b e8 6e 18 f1 ff <0f> 0b 31 db eb c9 e8 93 06 e0 ff 0f 1f 00 55 48 89 e5 53 48 89 fb
Call Trace:
vm_brk_flags+0xc3/0x100
vm_brk+0x1f/0x30
load_elf_library+0x281/0x2e0
__ia32_sys_uselib+0x170/0x1e0
do_fast_syscall_32+0xca/0x420
entry_SYSENTER_compat+0x70/0x7f
The reason is that the length of the new brk is not page aligned when we
try to populate the it. There is no reason to bug on that though.
do_brk_flags already aligns the length properly so the mapping is
expanded as it should. All we need is to tell mm_populate about it.
Besides that there is absolutely no reason to to bug_on in the first
place. The worst thing that could happen is that the last page wouldn't
get populated and that is far from putting system into an inconsistent
state.
Fix the issue by moving the length sanitization code from do_brk_flags
up to vm_brk_flags. The only other caller of do_brk_flags is brk
syscall entry and it makes sure to provide the proper length so t here
is no need for sanitation and so we can use do_brk_flags without it.
Also remove the bogus BUG_ONs.
[[email protected]: fix up vm_brk_flags s@request@len@]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Michal Hocko <[email protected]>
Reported-by: syzbot <[email protected]>
Tested-by: Tetsuo Handa <[email protected]>
Reviewed-by: Oscar Salvador <[email protected]>
Cc: Zi Yan <[email protected]>
Cc: "Aneesh Kumar K.V" <[email protected]>
Cc: Dan Williams <[email protected]>
Cc: "Kirill A. Shutemov" <[email protected]>
Cc: Michael S. Tsirkin <[email protected]>
Cc: Al Viro <[email protected]>
Cc: "Huang, Ying" <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|