aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2021-10-01ext4: fix loff_t overflow in ext4_max_bitmap_size()Ritesh Harjani1-5/+5
We should use unsigned long long rather than loff_t to avoid overflow in ext4_max_bitmap_size() for comparison before returning. w/o this patch sbi->s_bitmap_maxbytes was becoming a negative value due to overflow of upper_limit (with has_huge_files as true) Below is a quick test to trigger it on a 64KB pagesize system. sudo mkfs.ext4 -b 65536 -O ^has_extents,^64bit /dev/loop2 sudo mount /dev/loop2 /mnt sudo echo "hello" > /mnt/hello -> This will error out with "echo: write error: File too large" Signed-off-by: Ritesh Harjani <[email protected]> Reviewed-by: Jan Kara <[email protected]> Signed-off-by: Theodore Ts'o <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/594f409e2c543e90fd836b78188dfa5c575065ba.1622867594.git.riteshh@linux.ibm.com Signed-off-by: Theodore Ts'o <[email protected]>
2021-10-01ext4: fix reserved space counter leakageJeffle Xu2-0/+11
When ext4_insert_delayed block receives and recovers from an error from ext4_es_insert_delayed_block(), e.g., ENOMEM, it does not release the space it has reserved for that block insertion as it should. One effect of this bug is that s_dirtyclusters_counter is not decremented and remains incorrectly elevated until the file system has been unmounted. This can result in premature ENOSPC returns and apparent loss of free space. Another effect of this bug is that /sys/fs/ext4/<dev>/delayed_allocation_blocks can remain non-zero even after syncfs has been executed on the filesystem. Besides, add check for s_dirtyclusters_counter when inode is going to be evicted and freed. s_dirtyclusters_counter can still keep non-zero until inode is written back in .evict_inode(), and thus the check is delayed to .destroy_inode(). Fixes: 51865fda28e5 ("ext4: let ext4 maintain extent status tree") Cc: [email protected] Suggested-by: Gao Xiang <[email protected]> Signed-off-by: Jeffle Xu <[email protected]> Reviewed-by: Eric Whitney <[email protected]> Signed-off-by: Theodore Ts'o <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-10-01ext4: limit the number of blocks in one ADD_RANGE TLVHou Tao1-0/+6
Now EXT4_FC_TAG_ADD_RANGE uses ext4_extent to track the newly-added blocks, but the limit on the max value of ee_len field is ignored, and it can lead to BUG_ON as shown below when running command "fallocate -l 128M file" on a fast_commit-enabled fs: kernel BUG at fs/ext4/ext4_extents.h:199! invalid opcode: 0000 [#1] SMP PTI CPU: 3 PID: 624 Comm: fallocate Not tainted 5.14.0-rc6+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) RIP: 0010:ext4_fc_write_inode_data+0x1f3/0x200 Call Trace: ? ext4_fc_write_inode+0xf2/0x150 ext4_fc_commit+0x93b/0xa00 ? ext4_fallocate+0x1ad/0x10d0 ext4_sync_file+0x157/0x340 ? ext4_sync_file+0x157/0x340 vfs_fsync_range+0x49/0x80 do_fsync+0x3d/0x70 __x64_sys_fsync+0x14/0x20 do_syscall_64+0x3b/0xc0 entry_SYSCALL_64_after_hwframe+0x44/0xae Simply fixing it by limiting the number of blocks in one EXT4_FC_TAG_ADD_RANGE TLV. Fixes: aa75f4d3daae ("ext4: main fast-commit commit path") Cc: [email protected] Signed-off-by: Hou Tao <[email protected]> Signed-off-by: Theodore Ts'o <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-09-30ksmbd: missing check for NULL in convert_to_nt_pathname()Dan Carpenter1-10/+7
The kmalloc() does not have a NULL check. This code can be re-written slightly cleaner to just use the kstrdup(). Fixes: 265fd1991c1d ("ksmbd: use LOOKUP_BENEATH to prevent the out of share access") Signed-off-by: Dan Carpenter <[email protected]> Acked-by: Namjae Jeon <[email protected]> Acked-by: Hyunchul Lee <[email protected]> Signed-off-by: Steve French <[email protected]>
2021-09-30phy: mdio: fix memory leakPavel Skripkin1-0/+7
Syzbot reported memory leak in MDIO bus interface, the problem was in wrong state logic. MDIOBUS_ALLOCATED indicates 2 states: 1. Bus is only allocated 2. Bus allocated and __mdiobus_register() fails, but device_register() was called In case of device_register() has been called we should call put_device() to correctly free the memory allocated for this device, but mdiobus_free() calls just kfree(dev) in case of MDIOBUS_ALLOCATED state To avoid this behaviour we need to set bus->state to MDIOBUS_UNREGISTERED _before_ calling device_register(), because put_device() should be called even in case of device_register() failure. Link: https://lore.kernel.org/netdev/[email protected]/ Fixes: 46abc02175b3 ("phylib: give mdio buses a device tree presence") Reported-and-tested-by: [email protected] Reviewed-by: Dan Carpenter <[email protected]> Signed-off-by: Pavel Skripkin <[email protected]> Link: https://lore.kernel.org/r/eceae1429fbf8fa5c73dd2a0d39d525aa905074d.1633024062.git.paskripkin@gmail.com Signed-off-by: Jakub Kicinski <[email protected]>
2021-09-30Revert "net: mdiobus: Fix memory leak in __mdiobus_register"Pavel Skripkin1-1/+0
This reverts commit ab609f25d19858513919369ff3d9a63c02cd9e2e. This patch is correct in the sense that we _should_ call device_put() in case of device_register() failure, but the problem in this code is more vast. We need to set bus->state to UNMDIOBUS_REGISTERED before calling device_register() to correctly release the device in mdiobus_free(). This patch prevents us from doing it, since in case of device_register() failure put_device() will be called 2 times and it will cause UAF or something else. Also, Reported-by: tag in revered commit was wrong, since syzbot reported different leak in same function. Link: https://lore.kernel.org/netdev/20210928092657.GI2048@kadam/ Acked-by: Yanfei Xu <[email protected]> Signed-off-by: Pavel Skripkin <[email protected]> Link: https://lore.kernel.org/r/f12fb1faa4eccf0f355788225335eb4309ff2599.1633024062.git.paskripkin@gmail.com Signed-off-by: Jakub Kicinski <[email protected]>
2021-09-30Merge tag 'net-5.15-rc4' of ↵Linus Torvalds88-447/+1384
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Networking fixes, including fixes from mac80211, netfilter and bpf. Current release - regressions: - bpf, cgroup: assign cgroup in cgroup_sk_alloc when called from interrupt - mdio: revert mechanical patches which broke handling of optional resources - dev_addr_list: prevent address duplication Previous releases - regressions: - sctp: break out if skb_header_pointer returns NULL in sctp_rcv_ootb (NULL deref) - Revert "mac80211: do not use low data rates for data frames with no ack flag", fixing broadcast transmissions - mac80211: fix use-after-free in CCMP/GCMP RX - netfilter: include zone id in tuple hash again, minimize collisions - netfilter: nf_tables: unlink table before deleting it (race -> UAF) - netfilter: log: work around missing softdep backend module - mptcp: don't return sockets in foreign netns - sched: flower: protect fl_walk() with rcu (race -> UAF) - ixgbe: fix NULL pointer dereference in ixgbe_xdp_setup - smsc95xx: fix stalled rx after link change - enetc: fix the incorrect clearing of IF_MODE bits - ipv4: fix rtnexthop len when RTA_FLOW is present - dsa: mv88e6xxx: 6161: use correct MAX MTU config method for this SKU - e100: fix length calculation & buffer overrun in ethtool::get_regs Previous releases - always broken: - mac80211: fix using stale frag_tail skb pointer in A-MSDU tx - mac80211: drop frames from invalid MAC address in ad-hoc mode - af_unix: fix races in sk_peer_pid and sk_peer_cred accesses (race -> UAF) - bpf, x86: Fix bpf mapping of atomic fetch implementation - bpf: handle return value of BPF_PROG_TYPE_STRUCT_OPS prog - netfilter: ip6_tables: zero-initialize fragment offset - mhi: fix error path in mhi_net_newlink - af_unix: return errno instead of NULL in unix_create1() when over the fs.file-max limit Misc: - bpf: exempt CAP_BPF from checks against bpf_jit_limit - netfilter: conntrack: make max chain length random, prevent guessing buckets by attackers - netfilter: nf_nat_masquerade: make async masq_inet6_event handling generic, defer conntrack walk to work queue (prevent hogging RTNL lock)" * tag 'net-5.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (77 commits) af_unix: fix races in sk_peer_pid and sk_peer_cred accesses net: stmmac: fix EEE init issue when paired with EEE capable PHYs net: dev_addr_list: handle first address in __hw_addr_add_ex net: sched: flower: protect fl_walk() with rcu net: introduce and use lock_sock_fast_nested() net: phy: bcm7xxx: Fixed indirect MMD operations net: hns3: disable firmware compatible features when uninstall PF net: hns3: fix always enable rx vlan filter problem after selftest net: hns3: PF enable promisc for VF when mac table is overflow net: hns3: fix show wrong state when add existing uc mac address net: hns3: fix mixed flag HCLGE_FLAG_MQPRIO_ENABLE and HCLGE_FLAG_DCB_ENABLE net: hns3: don't rollback when destroy mqprio fail net: hns3: remove tc enable checking net: hns3: do not allow call hns3_nic_net_open repeatedly ixgbe: Fix NULL pointer dereference in ixgbe_xdp_setup net: bridge: mcast: Associate the seqcount with its protecting lock. net: mdio-ipq4019: Fix the error for an optional regs resource net: hns3: fix hclge_dbg_dump_tm_pg() stack usage net: mdio: mscc-miim: Fix the mdio controller af_unix: Return errno instead of NULL in unix_create1(). ...
2021-09-30libbpf: Fix segfault in light skeleton for objects without BTFKumar Kartikeya Dwivedi1-1/+2
When fed an empty BPF object, bpftool gen skeleton -L crashes at btf__set_fd() since it assumes presence of obj->btf, however for the sequence below clang adds no .BTF section (hence no BTF). Reproducer: $ touch a.bpf.c $ clang -O2 -g -target bpf -c a.bpf.c $ bpftool gen skeleton -L a.bpf.o /* SPDX-License-Identifier: (LGPL-2.1 OR BSD-2-Clause) */ /* THIS FILE IS AUTOGENERATED! */ struct a_bpf { struct bpf_loader_ctx ctx; Segmentation fault (core dumped) The same occurs for files compiled without BTF info, i.e. without clang's -g flag. Fixes: 67234743736a (libbpf: Generate loader program out of BPF ELF file.) Signed-off-by: Kumar Kartikeya Dwivedi <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-09-30net/mlx5e: Mutually exclude setting of TX-port-TS and MQPRIO in channel modeAya Levin2-0/+19
TX-port-TS hijacks the PTP traffic to a specific HW TX-queue. This conflicts with MQPRIO in channel mode, which specifies explicitly which TC accepts the packet. This patch mutually excludes the above configuration. Fixes: ec60c4581bd9 ("net/mlx5e: Support MQPRIO channel mode") Signed-off-by: Aya Levin <[email protected]> Reviewed-by: Tariq Toukan <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2021-09-30net/mlx5e: Fix the presented RQ index in PTP statsLama Kayal3-3/+5
PTP-RQ counters title format contains PTP-RQ identifier, which is mistakenly not passed to sprinft(). This leads to unexpected garbage values instead. This patch fixes it. Before applying the patch: ethtool -S eth3 | grep ptp_rq ptp_rq15_packets: 0 ptp_rq8_bytes: 0 ptp_rq6_csum_complete: 0 ptp_rq14_csum_complete_tail: 0 ptp_rq3_csum_complete_tail_slow : 0 ptp_rq9_csum_unnecessary: 0 ptp_rq1_csum_unnecessary_inner: 0 ptp_rq7_csum_none: 0 ptp_rq10_xdp_drop: 0 ptp_rq9_xdp_redirect: 0 ptp_rq13_lro_packets: 0 ptp_rq12_lro_bytes: 0 ptp_rq10_ecn_mark: 0 ptp_rq9_removed_vlan_packets: 0 ptp_rq5_wqe_err: 0 ptp_rq8_mpwqe_filler_cqes: 0 ptp_rq2_mpwqe_filler_strides: 0 ptp_rq5_oversize_pkts_sw_drop: 0 ptp_rq6_buff_alloc_err: 0 ptp_rq15_cqe_compress_blks: 0 ptp_rq2_cqe_compress_pkts: 0 ptp_rq2_cache_reuse: 0 ptp_rq12_cache_full: 0 ptp_rq11_cache_empty: 256 ptp_rq12_cache_busy: 0 ptp_rq11_cache_waive: 0 ptp_rq12_congst_umr: 0 ptp_rq11_arfs_err: 0 ptp_rq9_recover: 0 After applying the patch: ethtool -S eth3 | grep ptp_rq ptp_rq0_packets: 0 ptp_rq0_bytes: 0 ptp_rq0_csum_complete: 0 ptp_rq0_csum_complete_tail: 0 ptp_rq0_csum_complete_tail_slow : 0 ptp_rq0_csum_unnecessary: 0 ptp_rq0_csum_unnecessary_inner: 0 ptp_rq0_csum_none: 0 ptp_rq0_xdp_drop: 0 ptp_rq0_xdp_redirect: 0 ptp_rq0_lro_packets: 0 ptp_rq0_lro_bytes: 0 ptp_rq0_ecn_mark: 0 ptp_rq0_removed_vlan_packets: 0 ptp_rq0_wqe_err: 0 ptp_rq0_mpwqe_filler_cqes: 0 ptp_rq0_mpwqe_filler_strides: 0 ptp_rq0_oversize_pkts_sw_drop: 0 ptp_rq0_buff_alloc_err: 0 ptp_rq0_cqe_compress_blks: 0 ptp_rq0_cqe_compress_pkts: 0 ptp_rq0_cache_reuse: 0 ptp_rq0_cache_full: 0 ptp_rq0_cache_empty: 256 ptp_rq0_cache_busy: 0 ptp_rq0_cache_waive: 0 ptp_rq0_congst_umr: 0 ptp_rq0_arfs_err: 0 ptp_rq0_recover: 0 Fixes: a28359e922c6 ("net/mlx5e: Add PTP-RX statistics") Signed-off-by: Lama Kayal <[email protected]> Reviewed-by: Tariq Toukan <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2021-09-30net/mlx5: Fix setting number of EQs of SFsShay Drory1-2/+3
When setting number of completion EQs of the SF, consider number of online CPUs. Without this consideration, when number of online cpus are less than 8, unnecessary 8 completion EQs are allocated. Fixes: c36326d38d93 ("net/mlx5: Round-Robin EQs over IRQs") Signed-off-by: Shay Drory <[email protected]> Reviewed-by: Parav Pandit <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2021-09-30net/mlx5: Fix length of irq_index in charsShay Drory1-2/+2
The maximum irq_index can be 2047, This means irq_name should have 4 characters reserve for the irq_index. Hence, increase it to 4. Fixes: 3af26495a247 ("net/mlx5: Enlarge interrupt field in CREATE_EQ") Signed-off-by: Shay Drory <[email protected]> Reviewed-by: Parav Pandit <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2021-09-30net/mlx5: Avoid generating event after PPS out in Real time modeAya Levin1-8/+6
When in Real-time mode, HW clock is synced with the PTP daemon. Hence driver should not re-calibrate the next pulse (via MTPPSE repetitive events mechanism). This patch arms repetitive events only in free-running mode. Fixes: 432119de33d9 ("net/mlx5: Add cyc2time HW translation mode support") Signed-off-by: Aya Levin <[email protected]> Reviewed-by: Eran Ben Elisha <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2021-09-30net/mlx5: Force round second at 1PPS out start timeAya Levin1-14/+11
Allow configuration of 1PPS start time only with time-stamp representing a round second. Prior to this patch driver allowed setting of a non-round-second which is not supported by the device. Avoid unexpected behavior by restricting start-time configuration to a round-second. Fixes: 4272f9b88db9 ("net/mlx5e: Change 1PPS out scheme") Signed-off-by: Aya Levin <[email protected]> Reviewed-by: Eran Ben Elisha <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2021-09-30net/mlx5: E-Switch, Fix double allocation of acl flow counterMoshe Shemesh2-5/+11
Flow counter is allocated in eswitch legacy acl setting functions without checking if already allocated by previous setting. Add a check to avoid such double allocation. Fixes: 07bab9502641 ("net/mlx5: E-Switch, Refactor eswitch ingress acl codes") Fixes: ea651a86d468 ("net/mlx5: E-Switch, Refactor eswitch egress acl codes") Signed-off-by: Moshe Shemesh <[email protected]> Reviewed-by: Tariq Toukan <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2021-09-30net/mlx5e: Improve MQPRIO resiliencyTariq Toukan2-32/+80
* Add netdev->tc_to_txq rollback in case of failure in mlx5e_update_netdev_queues(). * Fix broken transition between the two modes: MQPRIO DCB mode with tc==8, and MQPRIO channel mode. * Disable MQPRIO channel mode if re-attaching with a different number of channels. * Improve code sharing. Fixes: ec60c4581bd9 ("net/mlx5e: Support MQPRIO channel mode") Signed-off-by: Tariq Toukan <[email protected]> Reviewed-by: Maxim Mikityanskiy <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2021-09-30net/mlx5e: Keep the value for maximum number of channels in-syncTariq Toukan6-34/+57
The value for maximum number of channels is first calculated based on the netdev's profile and current function resources (specifically, number of MSIX vectors, which depends among other things on the number of online cores in the system). This value is then used to calculate the netdev's number of rxqs/txqs. Once created (by alloc_etherdev_mqs), the number of netdev's rxqs/txqs is constant and we must not exceed it. To achieve this, keep the maximum number of channels in sync upon any netdevice re-attach. Use mlx5e_get_max_num_channels() for calculating the number of netdev's rxqs/txqs. After netdev is created, use mlx5e_calc_max_nch() (which coinsiders core device resources, profile, and netdev) to init or update priv->max_nch. Before this patch, the value of priv->max_nch might get out of sync, mistakenly allowing accesses to out-of-bounds objects, which would crash the system. Track the number of channels stats structures used in a separate field, as they are persistent to suspend/resume operations. All the collected stats of every channel index that ever existed should be preserved. They are reset only when struct mlx5e_priv is, in mlx5e_priv_cleanup(), which is part of the profile changing flow. There is no point anymore in blocking a profile change due to max_nch mismatch in mlx5e_netdev_change_profile(). Remove the limitation. Fixes: a1f240f18017 ("net/mlx5e: Adjust to max number of channles when re-attaching") Signed-off-by: Tariq Toukan <[email protected]> Reviewed-by: Aya Levin <[email protected]> Reviewed-by: Maxim Mikityanskiy <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2021-09-30net/mlx5e: IPSEC RX, enable checksum completeRaed Salem1-6/+1
Currently in Rx data path IPsec crypto offloaded packets uses csum_none flag, so checksum is handled by the stack, this naturally have some performance/cpu utilization impact on such flows. As Nvidia NIC starting from ConnectX6DX provides checksum complete value out of the box also for such flows there is no sense in taking csum_none path, furthermore the stack (xfrm) have the method to handle checksum complete corrections for such flows i.e. IPsec trailer removal and consequently checksum value adjustment. Because of the above and in addition the ConnectX6DX is the first HW which supports IPsec crypto offload then it is safe to report csum complete for IPsec offloaded traffic. Fixes: b2ac7541e377 ("net/mlx5e: IPsec: Add Connect-X IPsec Rx data path offload") Signed-off-by: Raed Salem <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2021-09-30nfsd4: Handle the NFSv4 READDIR 'dircount' hint being zeroTrond Myklebust1-8/+11
RFC3530 notes that the 'dircount' field may be zero, in which case the recommendation is to ignore it, and only enforce the 'maxcount' field. In RFC5661, this recommendation to ignore a zero valued field becomes a requirement. Fixes: aee377644146 ("nfsd4: fix rd_dircount enforcement") Cc: <[email protected]> Signed-off-by: Trond Myklebust <[email protected]> Signed-off-by: Chuck Lever <[email protected]>
2021-09-30Merge tag 'gpio-fixes-for-v5.15-rc4' of ↵Linus Torvalds2-14/+7
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull gpio fixes from Bartosz Golaszewski: "A single fix for the gpio-pca953x driver and two commits updating the MAINTAINERS entries for Mun Yew Tham (GPIO specific) and myself (treewide after a change in professional situation). Summary: - don't ignore I2C errors in gpio-pca953x - update MAINTAINERS entries for Mun Yew Tham and myself" * tag 'gpio-fixes-for-v5.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: MAINTAINERS: Update Mun Yew Tham as Altera Pio Driver maintainer MAINTAINERS: update my email address gpio: pca953x: do not ignore i2c errors
2021-09-30Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds17-48/+113
Pull rdma fixes from Jason Gunthorpe: "Not much too exciting here, although two syzkaller bugs that seem to have 9 lives may have finally been squashed. Several core bugs and a batch of driver bug fixes: - Fix compilation problems in qib and hfi1 - Do not corrupt the joined multicast group state when using SEND_ONLY - Several CMA bugs, a reference leak for listening and two syzkaller crashers - Various bug fixes for irdma - Fix a Sleeping while atomic bug in usnic - Properly sanitize kernel pointers in dmesg - Two bugs in the 64b CQE support for hns" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: RDMA/hns: Add the check of the CQE size of the user space RDMA/hns: Fix the size setting error when copying CQE in clean_cq() RDMA/hfi1: Fix kernel pointer leak RDMA/usnic: Lock VF with mutex instead of spinlock RDMA/hns: Work around broken constant propagation in gcc 8 RDMA/cma: Ensure rdma_addr_cancel() happens before issuing more requests RDMA/cma: Do not change route.addr.src_addr.ss_family RDMA/irdma: Report correct WC error when there are MW bind errors RDMA/irdma: Report correct WC error when transport retry counter is exceeded RDMA/irdma: Validate number of CQ entries on create CQ RDMA/irdma: Skip CQP ring during a reset MAINTAINERS: Update Broadcom RDMA maintainers RDMA/cma: Fix listener leak in rdma_cma_listen_on_all() failure IB/cma: Do not send IGMP leaves for sendonly Multicast groups IB/qib: Fix clang confusion of NULL pointer comparison
2021-09-30nfsd: fix error handling of register_pernet_subsys() in init_nfsd()Patrick Ho1-1/+1
init_nfsd() should not unregister pernet subsys if the register fails but should instead unwind from the last successful operation which is register_filesystem(). Unregistering a failed register_pernet_subsys() call can result in a kernel GPF as revealed by programmatically injecting an error in register_pernet_subsys(). Verified the fix handled failure gracefully with no lingering nfsd entry in /proc/filesystems. This change was introduced by the commit bd5ae9288d64 ("nfsd: register pernet ops last, unregister first"), the original error handling logic was correct. Fixes: bd5ae9288d64 ("nfsd: register pernet ops last, unregister first") Cc: [email protected] Signed-off-by: Patrick Ho <[email protected]> Acked-by: J. Bruce Fields <[email protected]> Signed-off-by: Chuck Lever <[email protected]>
2021-09-30ksmbd: fix transform header validationNamjae Jeon1-9/+9
Validate that the transform and smb request headers are present before checking OriginalMessageSize and SessionId fields. Cc: Ronnie Sahlberg <[email protected]> Cc: Ralph Böhme <[email protected]> Cc: Sergey Senozhatsky <[email protected]> Reviewed-by: Tom Talpey <[email protected]> Acked-by: Hyunchul Lee <[email protected]> Signed-off-by: Namjae Jeon <[email protected]> Signed-off-by: Steve French <[email protected]>
2021-09-30ksmbd: add buffer validation for SMB2_CREATE_CONTEXTHyunchul Lee3-13/+74
Add buffer validation for SMB2_CREATE_CONTEXT. Cc: Ronnie Sahlberg <[email protected]> Reviewed-by: Ralph Boehme <[email protected]> Signed-off-by: Hyunchul Lee <[email protected]> Signed-off-by: Namjae Jeon <[email protected]> Signed-off-by: Steve French <[email protected]>
2021-09-30ksmbd: add validation in smb2 negotiateNamjae Jeon2-6/+68
This patch add validation to check request buffer check in smb2 negotiate and fix null pointer deferencing oops in smb3_preauth_hash_rsp() that found from manual test. Cc: Tom Talpey <[email protected]> Cc: Ronnie Sahlberg <[email protected]> Cc: Ralph Böhme <[email protected]> Cc: Hyunchul Lee <[email protected]> Cc: Sergey Senozhatsky <[email protected]> Reviewed-by: Ralph Boehme <[email protected]> Signed-off-by: Namjae Jeon <[email protected]> Signed-off-by: Steve French <[email protected]>
2021-09-30ksmbd: add request buffer validation in smb2_set_infoNamjae Jeon1-42/+107
Add buffer validation in smb2_set_info, and remove unused variable in set_file_basic_info. and smb2_set_info infolevel functions take structure pointer argument. Cc: Tom Talpey <[email protected]> Cc: Ronnie Sahlberg <[email protected]> Cc: Ralph Böhme <[email protected]> Cc: Sergey Senozhatsky <[email protected]> Acked-by: Hyunchul Lee <[email protected]> Reviewed-by: Ralph Boehme <[email protected]> Signed-off-by: Namjae Jeon <[email protected]> Signed-off-by: Steve French <[email protected]>
2021-09-30ksmbd: use correct basic info level in set_file_basic_info()Namjae Jeon2-7/+15
Use correct basic info level in set/get_file_basic_info(). Reviewed-by: Ralph Boehme <[email protected]> Signed-off-by: Namjae Jeon <[email protected]> Signed-off-by: Steve French <[email protected]>
2021-09-30bpf: Fix integer overflow in prealloc_elems_and_freelist()Tatsuhiko Yasumatsu1-1/+2
In prealloc_elems_and_freelist(), the multiplication to calculate the size passed to bpf_map_area_alloc() could lead to an integer overflow. As a result, out-of-bounds write could occur in pcpu_freelist_populate() as reported by KASAN: [...] [ 16.968613] BUG: KASAN: slab-out-of-bounds in pcpu_freelist_populate+0xd9/0x100 [ 16.969408] Write of size 8 at addr ffff888104fc6ea0 by task crash/78 [ 16.970038] [ 16.970195] CPU: 0 PID: 78 Comm: crash Not tainted 5.15.0-rc2+ #1 [ 16.970878] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 [ 16.972026] Call Trace: [ 16.972306] dump_stack_lvl+0x34/0x44 [ 16.972687] print_address_description.constprop.0+0x21/0x140 [ 16.973297] ? pcpu_freelist_populate+0xd9/0x100 [ 16.973777] ? pcpu_freelist_populate+0xd9/0x100 [ 16.974257] kasan_report.cold+0x7f/0x11b [ 16.974681] ? pcpu_freelist_populate+0xd9/0x100 [ 16.975190] pcpu_freelist_populate+0xd9/0x100 [ 16.975669] stack_map_alloc+0x209/0x2a0 [ 16.976106] __sys_bpf+0xd83/0x2ce0 [...] The possibility of this overflow was originally discussed in [0], but was overlooked. Fix the integer overflow by changing elem_size to u64 from u32. [0] https://lore.kernel.org/bpf/[email protected]/ Fixes: 557c0c6e7df8 ("bpf: convert stackmap to pre-allocation") Signed-off-by: Tatsuhiko Yasumatsu <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-09-30af_unix: fix races in sk_peer_pid and sk_peer_cred accessesEric Dumazet3-12/+56
Jann Horn reported that SO_PEERCRED and SO_PEERGROUPS implementations are racy, as af_unix can concurrently change sk_peer_pid and sk_peer_cred. In order to fix this issue, this patch adds a new spinlock that needs to be used whenever these fields are read or written. Jann also pointed out that l2cap_sock_get_peer_pid_cb() is currently reading sk->sk_peer_pid which makes no sense, as this field is only possibly set by AF_UNIX sockets. We will have to clean this in a separate patch. This could be done by reverting b48596d1dc25 "Bluetooth: L2CAP: Add get_peer_pid callback" or implementing what was truly expected. Fixes: 109f6e39fa07 ("af_unix: Allow SO_PEERCRED to work across namespaces.") Signed-off-by: Eric Dumazet <[email protected]> Reported-by: Jann Horn <[email protected]> Cc: Eric W. Biederman <[email protected]> Cc: Luiz Augusto von Dentz <[email protected]> Cc: Marcel Holtmann <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-09-30net: stmmac: fix EEE init issue when paired with EEE capable PHYsWong Vee Khee1-0/+4
When STMMAC is paired with Energy-Efficient Ethernet(EEE) capable PHY, and the PHY is advertising EEE by default, we need to enable EEE on the xPCS side too, instead of having user to manually trigger the enabling config via ethtool. Fixed this by adding xpcs_config_eee() call in stmmac_eee_init(). Fixes: 7617af3d1a5e ("net: pcs: Introducing support for DWC xpcs Energy Efficient Ethernet") Cc: Michael Sit Wei Hong <[email protected]> Signed-off-by: Wong Vee Khee <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-09-30net: dev_addr_list: handle first address in __hw_addr_add_exJakub Kicinski1-0/+6
struct dev_addr_list is used for device addresses, unicast addresses and multicast addresses. The first of those needs special handling of the main address - netdev->dev_addr points directly the data of the entry and drivers write to it freely, so we can't maintain it in the rbtree (for now, at least, to be fixed in net-next). Current work around sprinkles special handling of the first address on the list throughout the code but it missed the case where address is being added. First address will not be visible during subsequent adds. Syzbot found a warning where unicast addresses are modified without holding the rtnl lock, tl;dr is that team generates the same modification multiple times, not necessarily when right locks are held. In the repro we have: macvlan -> team -> veth macvlan adds a unicast address to the team. Team then pushes that address down to its memebers (veths). Next something unrelated makes team sync member addrs again, and because of the bug the addr entries get duplicated in the veths. macvlan gets removed, removes its addr from team which removes only one of the duplicated addresses from veths. This removal is done under rtnl. Next syzbot uses iptables to add a multicast addr to team (which does not hold rtnl lock). Team syncs veth addrs, but because veths' unicast list still has the duplicate it will also get sync, even though this update is intended for mc addresses. Again, uc address updates need rtnl lock, boom. Reported-by: [email protected] Fixes: 406f42fa0d3c ("net-next: When a bond have a massive amount of VLANs with IPv6 addresses, performance of changing link state, attaching a VRF, changing an IPv6 address, etc. go down dramtically.") Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-09-30net: sched: flower: protect fl_walk() with rcuVlad Buslov1-0/+6
Patch that refactored fl_walk() to use idr_for_each_entry_continue_ul() also removed rcu protection of individual filters which causes following use-after-free when filter is deleted concurrently. Fix fl_walk() to obtain rcu read lock while iterating and taking the filter reference and temporary release the lock while calling arg->fn() callback that can sleep. KASAN trace: [ 352.773640] ================================================================== [ 352.775041] BUG: KASAN: use-after-free in fl_walk+0x159/0x240 [cls_flower] [ 352.776304] Read of size 4 at addr ffff8881c8251480 by task tc/2987 [ 352.777862] CPU: 3 PID: 2987 Comm: tc Not tainted 5.15.0-rc2+ #2 [ 352.778980] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 352.781022] Call Trace: [ 352.781573] dump_stack_lvl+0x46/0x5a [ 352.782332] print_address_description.constprop.0+0x1f/0x140 [ 352.783400] ? fl_walk+0x159/0x240 [cls_flower] [ 352.784292] ? fl_walk+0x159/0x240 [cls_flower] [ 352.785138] kasan_report.cold+0x83/0xdf [ 352.785851] ? fl_walk+0x159/0x240 [cls_flower] [ 352.786587] kasan_check_range+0x145/0x1a0 [ 352.787337] fl_walk+0x159/0x240 [cls_flower] [ 352.788163] ? fl_put+0x10/0x10 [cls_flower] [ 352.789007] ? __mutex_unlock_slowpath.constprop.0+0x220/0x220 [ 352.790102] tcf_chain_dump+0x231/0x450 [ 352.790878] ? tcf_chain_tp_delete_empty+0x170/0x170 [ 352.791833] ? __might_sleep+0x2e/0xc0 [ 352.792594] ? tfilter_notify+0x170/0x170 [ 352.793400] ? __mutex_unlock_slowpath.constprop.0+0x220/0x220 [ 352.794477] tc_dump_tfilter+0x385/0x4b0 [ 352.795262] ? tc_new_tfilter+0x1180/0x1180 [ 352.796103] ? __mod_node_page_state+0x1f/0xc0 [ 352.796974] ? __build_skb_around+0x10e/0x130 [ 352.797826] netlink_dump+0x2c0/0x560 [ 352.798563] ? netlink_getsockopt+0x430/0x430 [ 352.799433] ? __mutex_unlock_slowpath.constprop.0+0x220/0x220 [ 352.800542] __netlink_dump_start+0x356/0x440 [ 352.801397] rtnetlink_rcv_msg+0x3ff/0x550 [ 352.802190] ? tc_new_tfilter+0x1180/0x1180 [ 352.802872] ? rtnl_calcit.isra.0+0x1f0/0x1f0 [ 352.803668] ? tc_new_tfilter+0x1180/0x1180 [ 352.804344] ? _copy_from_iter_nocache+0x800/0x800 [ 352.805202] ? kasan_set_track+0x1c/0x30 [ 352.805900] netlink_rcv_skb+0xc6/0x1f0 [ 352.806587] ? rht_deferred_worker+0x6b0/0x6b0 [ 352.807455] ? rtnl_calcit.isra.0+0x1f0/0x1f0 [ 352.808324] ? netlink_ack+0x4d0/0x4d0 [ 352.809086] ? netlink_deliver_tap+0x62/0x3d0 [ 352.809951] netlink_unicast+0x353/0x480 [ 352.810744] ? netlink_attachskb+0x430/0x430 [ 352.811586] ? __alloc_skb+0xd7/0x200 [ 352.812349] netlink_sendmsg+0x396/0x680 [ 352.813132] ? netlink_unicast+0x480/0x480 [ 352.813952] ? __import_iovec+0x192/0x210 [ 352.814759] ? netlink_unicast+0x480/0x480 [ 352.815580] sock_sendmsg+0x6c/0x80 [ 352.816299] ____sys_sendmsg+0x3a5/0x3c0 [ 352.817096] ? kernel_sendmsg+0x30/0x30 [ 352.817873] ? __ia32_sys_recvmmsg+0x150/0x150 [ 352.818753] ___sys_sendmsg+0xd8/0x140 [ 352.819518] ? sendmsg_copy_msghdr+0x110/0x110 [ 352.820402] ? ___sys_recvmsg+0xf4/0x1a0 [ 352.821110] ? __copy_msghdr_from_user+0x260/0x260 [ 352.821934] ? _raw_spin_lock+0x81/0xd0 [ 352.822680] ? __handle_mm_fault+0xef3/0x1b20 [ 352.823549] ? rb_insert_color+0x2a/0x270 [ 352.824373] ? copy_page_range+0x16b0/0x16b0 [ 352.825209] ? perf_event_update_userpage+0x2d0/0x2d0 [ 352.826190] ? __fget_light+0xd9/0xf0 [ 352.826941] __sys_sendmsg+0xb3/0x130 [ 352.827613] ? __sys_sendmsg_sock+0x20/0x20 [ 352.828377] ? do_user_addr_fault+0x2c5/0x8a0 [ 352.829184] ? fpregs_assert_state_consistent+0x52/0x60 [ 352.830001] ? exit_to_user_mode_prepare+0x32/0x160 [ 352.830845] do_syscall_64+0x35/0x80 [ 352.831445] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 352.832331] RIP: 0033:0x7f7bee973c17 [ 352.833078] Code: 0c 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 89 74 24 10 [ 352.836202] RSP: 002b:00007ffcbb368e28 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 352.837524] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f7bee973c17 [ 352.838715] RDX: 0000000000000000 RSI: 00007ffcbb368e50 RDI: 0000000000000003 [ 352.839838] RBP: 00007ffcbb36d090 R08: 00000000cea96d79 R09: 00007f7beea34a40 [ 352.841021] R10: 00000000004059bb R11: 0000000000000246 R12: 000000000046563f [ 352.842208] R13: 0000000000000000 R14: 0000000000000000 R15: 00007ffcbb36d088 [ 352.843784] Allocated by task 2960: [ 352.844451] kasan_save_stack+0x1b/0x40 [ 352.845173] __kasan_kmalloc+0x7c/0x90 [ 352.845873] fl_change+0x282/0x22db [cls_flower] [ 352.846696] tc_new_tfilter+0x6cf/0x1180 [ 352.847493] rtnetlink_rcv_msg+0x471/0x550 [ 352.848323] netlink_rcv_skb+0xc6/0x1f0 [ 352.849097] netlink_unicast+0x353/0x480 [ 352.849886] netlink_sendmsg+0x396/0x680 [ 352.850678] sock_sendmsg+0x6c/0x80 [ 352.851398] ____sys_sendmsg+0x3a5/0x3c0 [ 352.852202] ___sys_sendmsg+0xd8/0x140 [ 352.852967] __sys_sendmsg+0xb3/0x130 [ 352.853718] do_syscall_64+0x35/0x80 [ 352.854457] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 352.855830] Freed by task 7: [ 352.856421] kasan_save_stack+0x1b/0x40 [ 352.857139] kasan_set_track+0x1c/0x30 [ 352.857854] kasan_set_free_info+0x20/0x30 [ 352.858609] __kasan_slab_free+0xed/0x130 [ 352.859348] kfree+0xa7/0x3c0 [ 352.859951] process_one_work+0x44d/0x780 [ 352.860685] worker_thread+0x2e2/0x7e0 [ 352.861390] kthread+0x1f4/0x220 [ 352.862022] ret_from_fork+0x1f/0x30 [ 352.862955] Last potentially related work creation: [ 352.863758] kasan_save_stack+0x1b/0x40 [ 352.864378] kasan_record_aux_stack+0xab/0xc0 [ 352.865028] insert_work+0x30/0x160 [ 352.865617] __queue_work+0x351/0x670 [ 352.866261] rcu_work_rcufn+0x30/0x40 [ 352.866917] rcu_core+0x3b2/0xdb0 [ 352.867561] __do_softirq+0xf6/0x386 [ 352.868708] Second to last potentially related work creation: [ 352.869779] kasan_save_stack+0x1b/0x40 [ 352.870560] kasan_record_aux_stack+0xab/0xc0 [ 352.871426] call_rcu+0x5f/0x5c0 [ 352.872108] queue_rcu_work+0x44/0x50 [ 352.872855] __fl_put+0x17c/0x240 [cls_flower] [ 352.873733] fl_delete+0xc7/0x100 [cls_flower] [ 352.874607] tc_del_tfilter+0x510/0xb30 [ 352.886085] rtnetlink_rcv_msg+0x471/0x550 [ 352.886875] netlink_rcv_skb+0xc6/0x1f0 [ 352.887636] netlink_unicast+0x353/0x480 [ 352.888285] netlink_sendmsg+0x396/0x680 [ 352.888942] sock_sendmsg+0x6c/0x80 [ 352.889583] ____sys_sendmsg+0x3a5/0x3c0 [ 352.890311] ___sys_sendmsg+0xd8/0x140 [ 352.891019] __sys_sendmsg+0xb3/0x130 [ 352.891716] do_syscall_64+0x35/0x80 [ 352.892395] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 352.893666] The buggy address belongs to the object at ffff8881c8251000 which belongs to the cache kmalloc-2k of size 2048 [ 352.895696] The buggy address is located 1152 bytes inside of 2048-byte region [ffff8881c8251000, ffff8881c8251800) [ 352.897640] The buggy address belongs to the page: [ 352.898492] page:00000000213bac35 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1c8250 [ 352.900110] head:00000000213bac35 order:3 compound_mapcount:0 compound_pincount:0 [ 352.901541] flags: 0x2ffff800010200(slab|head|node=0|zone=2|lastcpupid=0x1ffff) [ 352.902908] raw: 002ffff800010200 0000000000000000 dead000000000122 ffff888100042f00 [ 352.904391] raw: 0000000000000000 0000000000080008 00000001ffffffff 0000000000000000 [ 352.905861] page dumped because: kasan: bad access detected [ 352.907323] Memory state around the buggy address: [ 352.908218] ffff8881c8251380: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 352.909471] ffff8881c8251400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 352.910735] >ffff8881c8251480: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 352.912012] ^ [ 352.912642] ffff8881c8251500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 352.913919] ffff8881c8251580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 352.915185] ================================================================== Fixes: d39d714969cd ("idr: introduce idr_for_each_entry_continue_ul()") Signed-off-by: Vlad Buslov <[email protected]> Acked-by: Cong Wang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-09-30net: introduce and use lock_sock_fast_nested()Paolo Abeni3-20/+33
Syzkaller reported a false positive deadlock involving the nl socket lock and the subflow socket lock: MPTCP: kernel_bind error, err=-98 ============================================ WARNING: possible recursive locking detected 5.15.0-rc1-syzkaller #0 Not tainted -------------------------------------------- syz-executor998/6520 is trying to acquire lock: ffff8880795718a0 (k-sk_lock-AF_INET){+.+.}-{0:0}, at: mptcp_close+0x267/0x7b0 net/mptcp/protocol.c:2738 but task is already holding lock: ffff8880787c8c60 (k-sk_lock-AF_INET){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1612 [inline] ffff8880787c8c60 (k-sk_lock-AF_INET){+.+.}-{0:0}, at: mptcp_close+0x23/0x7b0 net/mptcp/protocol.c:2720 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(k-sk_lock-AF_INET); lock(k-sk_lock-AF_INET); *** DEADLOCK *** May be due to missing lock nesting notation 3 locks held by syz-executor998/6520: #0: ffffffff8d176c50 (cb_lock){++++}-{3:3}, at: genl_rcv+0x15/0x40 net/netlink/genetlink.c:802 #1: ffffffff8d176d08 (genl_mutex){+.+.}-{3:3}, at: genl_lock net/netlink/genetlink.c:33 [inline] #1: ffffffff8d176d08 (genl_mutex){+.+.}-{3:3}, at: genl_rcv_msg+0x3e0/0x580 net/netlink/genetlink.c:790 #2: ffff8880787c8c60 (k-sk_lock-AF_INET){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1612 [inline] #2: ffff8880787c8c60 (k-sk_lock-AF_INET){+.+.}-{0:0}, at: mptcp_close+0x23/0x7b0 net/mptcp/protocol.c:2720 stack backtrace: CPU: 1 PID: 6520 Comm: syz-executor998 Not tainted 5.15.0-rc1-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_deadlock_bug kernel/locking/lockdep.c:2944 [inline] check_deadlock kernel/locking/lockdep.c:2987 [inline] validate_chain kernel/locking/lockdep.c:3776 [inline] __lock_acquire.cold+0x149/0x3ab kernel/locking/lockdep.c:5015 lock_acquire kernel/locking/lockdep.c:5625 [inline] lock_acquire+0x1ab/0x510 kernel/locking/lockdep.c:5590 lock_sock_fast+0x36/0x100 net/core/sock.c:3229 mptcp_close+0x267/0x7b0 net/mptcp/protocol.c:2738 inet_release+0x12e/0x280 net/ipv4/af_inet.c:431 __sock_release net/socket.c:649 [inline] sock_release+0x87/0x1b0 net/socket.c:677 mptcp_pm_nl_create_listen_socket+0x238/0x2c0 net/mptcp/pm_netlink.c:900 mptcp_nl_cmd_add_addr+0x359/0x930 net/mptcp/pm_netlink.c:1170 genl_family_rcv_msg_doit+0x228/0x320 net/netlink/genetlink.c:731 genl_family_rcv_msg net/netlink/genetlink.c:775 [inline] genl_rcv_msg+0x328/0x580 net/netlink/genetlink.c:792 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2504 genl_rcv+0x24/0x40 net/netlink/genetlink.c:803 netlink_unicast_kernel net/netlink/af_netlink.c:1314 [inline] netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1340 netlink_sendmsg+0x86d/0xdb0 net/netlink/af_netlink.c:1929 sock_sendmsg_nosec net/socket.c:704 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:724 sock_no_sendpage+0x101/0x150 net/core/sock.c:2980 kernel_sendpage.part.0+0x1a0/0x340 net/socket.c:3504 kernel_sendpage net/socket.c:3501 [inline] sock_sendpage+0xe5/0x140 net/socket.c:1003 pipe_to_sendpage+0x2ad/0x380 fs/splice.c:364 splice_from_pipe_feed fs/splice.c:418 [inline] __splice_from_pipe+0x43e/0x8a0 fs/splice.c:562 splice_from_pipe fs/splice.c:597 [inline] generic_splice_sendpage+0xd4/0x140 fs/splice.c:746 do_splice_from fs/splice.c:767 [inline] direct_splice_actor+0x110/0x180 fs/splice.c:936 splice_direct_to_actor+0x34b/0x8c0 fs/splice.c:891 do_splice_direct+0x1b3/0x280 fs/splice.c:979 do_sendfile+0xae9/0x1240 fs/read_write.c:1249 __do_sys_sendfile64 fs/read_write.c:1314 [inline] __se_sys_sendfile64 fs/read_write.c:1300 [inline] __x64_sys_sendfile64+0x1cc/0x210 fs/read_write.c:1300 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f215cb69969 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 e1 14 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffc96bb3868 EFLAGS: 00000246 ORIG_RAX: 0000000000000028 RAX: ffffffffffffffda RBX: 00007f215cbad072 RCX: 00007f215cb69969 RDX: 0000000000000000 RSI: 0000000000000004 RDI: 0000000000000005 RBP: 0000000000000000 R08: 00007ffc96bb3a08 R09: 00007ffc96bb3a08 R10: 0000000100000002 R11: 0000000000000246 R12: 00007ffc96bb387c R13: 431bde82d7b634db R14: 0000000000000000 R15: 0000000000000000 the problem originates from uncorrect lock annotation in the mptcp code and is only visible since commit 2dcb96bacce3 ("net: core: Correct the sock::sk_lock.owned lockdep annotations"), but is present since the port-based endpoint support initial implementation. This patch addresses the issue introducing a nested variant of lock_sock_fast() and using it in the relevant code path. Fixes: 1729cf186d8a ("mptcp: create the listening socket for new port") Fixes: 2dcb96bacce3 ("net: core: Correct the sock::sk_lock.owned lockdep annotations") Suggested-by: Thomas Gleixner <[email protected]> Reported-and-tested-by: [email protected] Signed-off-by: Paolo Abeni <[email protected]> Reviewed-by: Thomas Gleixner <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-09-30soc: ti: omap-prm: Fix external abort for am335x prussTony Lindgren1-12/+15
Starting with v5.15-rc1, we may now see some am335x beaglebone black device produce the following error on pruss probe: Unhandled fault: external abort on non-linefetch (0x1008) at 0xe0326000 This has started with the enabling of pruss for am335x in the dts files. Turns out the is caused by the PRM reset handling not waiting for the reset bit to clear. To fix the issue, let's always wait for the reset bit to clear, even if there is a separate reset status register. We attempted to fix a similar issue for dra7 iva with a udelay() in commit effe89e40037 ("soc: ti: omap-prm: Fix occasional abort on reset deassert for dra7 iva"). There is no longer a need for the udelay() for dra7 iva reset either with the check added for reset bit clearing. Cc: Drew Fustini <[email protected]> Cc: Grygorii Strashko <[email protected]> Cc: "H. Nikolaus Schaller" <[email protected]> Cc: Robert Nelson <[email protected]> Cc: Yongqin Liu <[email protected]> Fixes: effe89e40037 ("soc: ti: omap-prm: Fix occasional abort on reset deassert for dra7 iva") Reported-by: Matti Vaittinen <[email protected]> Tested-by: Matti Vaittinen <[email protected]> Signed-off-by: Tony Lindgren <[email protected]>
2021-09-30KVM: selftests: Ensure all migrations are performed when test is affinedSean Christopherson1-10/+59
Rework the CPU selection in the migration worker to ensure the specified number of migrations are performed when the test iteslf is affined to a subset of CPUs. The existing logic skips iterations if the target CPU is not in the original set of possible CPUs, which causes the test to fail if too many iterations are skipped. ==== Test Assertion Failure ==== rseq_test.c:228: i > (NR_TASK_MIGRATIONS / 2) pid=10127 tid=10127 errno=4 - Interrupted system call 1 0x00000000004018e5: main at rseq_test.c:227 2 0x00007fcc8fc66bf6: ?? ??:0 3 0x0000000000401959: _start at ??:? Only performed 4 KVM_RUNs, task stalled too much? Calculate the min/max possible CPUs as a cheap "best effort" to avoid high runtimes when the test is affined to a small percentage of CPUs. Alternatively, a list or xarray of the possible CPUs could be used, but even in a horrendously inefficient setup, such optimizations are not needed because the runtime is completely dominated by the cost of migrating the task, and the absolute runtime is well under a minute in even truly absurd setups, e.g. running on a subset of vCPUs in a VM that is heavily overcommited (16 vCPUs per pCPU). Fixes: 61e52f1630f5 ("KVM: selftests: Add a test for KVM_RUN+rseq to detect task migration bugs") Reported-by: Dongli Zhang <[email protected]> Signed-off-by: Sean Christopherson <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2021-09-30KVM: x86: Swap order of CPUID entry "index" vs. "significant flag" checksSean Christopherson1-2/+2
Check whether a CPUID entry's index is significant before checking for a matching index to hack-a-fix an undefined behavior bug due to consuming uninitialized data. RESET/INIT emulation uses kvm_cpuid() to retrieve CPUID.0x1, which does _not_ have a significant index, and fails to initialize the dummy variable that doubles as EBX/ECX/EDX output _and_ ECX, a.k.a. index, input. Practically speaking, it's _extremely_ unlikely any compiler will yield code that causes problems, as the compiler would need to inline the kvm_cpuid() call to detect the uninitialized data, and intentionally hose the kernel, e.g. insert ud2, instead of simply ignoring the result of the index comparison. Although the sketchy "dummy" pattern was introduced in SVM by commit 66f7b72e1171 ("KVM: x86: Make register state after reset conform to specification"), it wasn't actually broken until commit 7ff6c0350315 ("KVM: x86: Remove stateful CPUID handling") arbitrarily swapped the order of operations such that "index" was checked before the significant flag. Avoid consuming uninitialized data by reverting to checking the flag before the index purely so that the fix can be easily backported; the offending RESET/INIT code has been refactored, moved, and consolidated from vendor code to common x86 since the bug was introduced. A future patch will directly address the bad RESET/INIT behavior. The undefined behavior was detected by syzbot + KernelMemorySanitizer. BUG: KMSAN: uninit-value in cpuid_entry2_find arch/x86/kvm/cpuid.c:68 BUG: KMSAN: uninit-value in kvm_find_cpuid_entry arch/x86/kvm/cpuid.c:1103 BUG: KMSAN: uninit-value in kvm_cpuid+0x456/0x28f0 arch/x86/kvm/cpuid.c:1183 cpuid_entry2_find arch/x86/kvm/cpuid.c:68 [inline] kvm_find_cpuid_entry arch/x86/kvm/cpuid.c:1103 [inline] kvm_cpuid+0x456/0x28f0 arch/x86/kvm/cpuid.c:1183 kvm_vcpu_reset+0x13fb/0x1c20 arch/x86/kvm/x86.c:10885 kvm_apic_accept_events+0x58f/0x8c0 arch/x86/kvm/lapic.c:2923 vcpu_enter_guest+0xfd2/0x6d80 arch/x86/kvm/x86.c:9534 vcpu_run+0x7f5/0x18d0 arch/x86/kvm/x86.c:9788 kvm_arch_vcpu_ioctl_run+0x245b/0x2d10 arch/x86/kvm/x86.c:10020 Local variable ----dummy@kvm_vcpu_reset created at: kvm_vcpu_reset+0x1fb/0x1c20 arch/x86/kvm/x86.c:10812 kvm_apic_accept_events+0x58f/0x8c0 arch/x86/kvm/lapic.c:2923 Reported-by: [email protected] Reported-by: Alexander Potapenko <[email protected]> Fixes: 2a24be79b6b7 ("KVM: VMX: Set EDX at INIT with CPUID.0x1, Family-Model-Stepping") Fixes: 7ff6c0350315 ("KVM: x86: Remove stateful CPUID handling") Cc: [email protected] Signed-off-by: Sean Christopherson <[email protected]> Reviewed-by: Jim Mattson <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2021-09-30ptp: Fix ptp_kvm_getcrosststamp issue for x86 ptp_kvmZelin Deng1-7/+2
hv_clock is preallocated to have only HVC_BOOT_ARRAY_SIZE (64) elements; if the PTP_SYS_OFFSET_PRECISE ioctl is executed on vCPUs whose index is 64 of higher, retrieving the struct pvclock_vcpu_time_info pointer with "src = &hv_clock[cpu].pvti" will result in an out-of-bounds access and a wild pointer. Change it to "this_cpu_pvti()" which is guaranteed to be valid. Fixes: 95a3d4454bb1 ("Switch kvmclock data to a PER_CPU variable") Signed-off-by: Zelin Deng <[email protected]> Cc: <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2021-09-30x86/kvmclock: Move this_cpu_pvti into kvmclock.hZelin Deng2-11/+16
There're other modules might use hv_clock_per_cpu variable like ptp_kvm, so move it into kvmclock.h and export the symbol to make it visiable to other modules. Signed-off-by: Zelin Deng <[email protected]> Cc: <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2021-09-30powerpc/iommu: Report the correct most efficient DMA mask for PCI devicesAlexey Kardashevskiy1-0/+9
According to dma-api.rst, the dma_get_required_mask() helper should return "the mask that the platform requires to operate efficiently". Which in the case of PPC64 means the bypass mask and not a mask from an IOMMU table which is shorter and slower to use due to map/unmap operations (especially expensive on "pseries"). However the existing implementation ignores the possibility of bypassing and returns the IOMMU table mask on the pseries platform which makes some drivers (mpt3sas is one example) choose 32bit DMA even though bypass is supported. The powernv platform sort of handles it by having a bigger default window with a mask >=40 but it only works as drivers choose 63/64bit if the required mask is >32 which is rather pointless. This reintroduces the bypass capability check to let drivers make a better choice of the DMA mask. Fixes: f1565c24b596 ("powerpc: use the generic dma_ops_bypass mode") Signed-off-by: Alexey Kardashevskiy <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-09-29nbd: use shifts rather than multipliesNick Desaulniers1-12/+17
commit fad7cd3310db ("nbd: add the check to prevent overflow in __nbd_ioctl()") raised an issue from the fallback helpers added in commit f0907827a8a9 ("compiler.h: enable builtin overflow checkers and add fallback code") ERROR: modpost: "__divdi3" [drivers/block/nbd.ko] undefined! As Stephen Rothwell notes: The added check_mul_overflow() call is being passed 64 bit values. COMPILER_HAS_GENERIC_BUILTIN_OVERFLOW is not set for this build (see include/linux/overflow.h). Specifically, the helpers for checking whether the results of a multiplication overflowed (__unsigned_mul_overflow, __signed_add_overflow) use the division operator when !COMPILER_HAS_GENERIC_BUILTIN_OVERFLOW. This is problematic for 64b operands on 32b hosts. This was fixed upstream by commit 76ae847497bc ("Documentation: raise minimum supported version of GCC to 5.1") which is not suitable to be backported to stable. Further, __builtin_mul_overflow() would emit a libcall to a compiler-rt-only symbol when compiling with clang < 14 for 32b targets. ld.lld: error: undefined symbol: __mulodi4 In order to keep stable buildable with GCC 4.9 and clang < 14, modify struct nbd_config to instead track the number of bits of the block size; reconstructing the block size using runtime checked shifts that are not problematic for those compilers and in a ways that can be backported to stable. In nbd_set_size, we do validate that the value of blksize must be a power of two (POT) and is in the range of [512, PAGE_SIZE] (both inclusive). This does modify the debugfs interface. Cc: [email protected] Cc: Arnd Bergmann <[email protected]> Cc: Rasmus Villemoes <[email protected]> Link: https://github.com/ClangBuiltLinux/linux/issues/1438 Link: https://lore.kernel.org/all/[email protected]/ Link: https://lore.kernel.org/stable/CAHk-=whiQBofgis_rkniz8GBP9wZtSZdcDEffgSLO62BUGV3gg@mail.gmail.com/ Reported-by: Naresh Kamboju <[email protected]> Reported-by: Nathan Chancellor <[email protected]> Reported-by: Stephen Rothwell <[email protected]> Suggested-by: Kees Cook <[email protected]> Suggested-by: Linus Torvalds <[email protected]> Suggested-by: Pavel Machek <[email protected]> Signed-off-by: Nick Desaulniers <[email protected]> Reviewed-by: Josef Bacik <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]>
2021-09-29ksmbd: remove NTLMv1 authenticationNamjae Jeon3-229/+0
Remove insecure NTLMv1 authentication. Cc: Ronnie Sahlberg <[email protected]> Cc: Ralph Böhme <[email protected]> Reviewed-by: Tom Talpey <[email protected]> Acked-by: Steve French <[email protected]> Signed-off-by: Namjae Jeon <[email protected]> Signed-off-by: Steve French <[email protected]>
2021-09-29MAINTAINERS: Update Mun Yew Tham as Altera Pio Driver maintainerMun Yew Tham1-1/+1
Update Altera Pio Driver maintainer's email from <[email protected]> to <[email protected]> Signed-off-by: Mun Yew Tham <[email protected]> Acked-by: Joyce Ooi <[email protected]> Signed-off-by: Bartosz Golaszewski <[email protected]>
2021-09-29MAINTAINERS: update my email addressBartosz Golaszewski1-4/+4
My professional situation changes soon. Update my email address. Signed-off-by: Bartosz Golaszewski <[email protected]> Reviewed-by: Linus Walleij <[email protected]> Acked-by: Andy Shevchenko <[email protected]>
2021-09-29gpio: pca953x: do not ignore i2c errorsAndrey Gusakov1-9/+2
Per gpio_chip interface, error shall be proparated to the caller. Attempt to silent diagnostics by returning zero (as written in the comment) is plain wrong, because the zero return can be interpreted by the caller as the gpio value. Cc: [email protected] Signed-off-by: Andrey Gusakov <[email protected]> Signed-off-by: Nikita Yushchenko <[email protected]> Signed-off-by: Bartosz Golaszewski <[email protected]>
2021-09-29Merge tag 'sound-5.15-rc4' of ↵Linus Torvalds30-102/+272
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "This became a slightly large collection of changes, partly because I've been off in the last weeks. Most of changes are small and scattered while a bit big change is found in HD-audio Realtek codec driver; it's a very device-specific fix that has been long wanted, so I decided to pick up although it's in the middle RC. Some highlights: - A new guard ioctl for ALSA rawmidi API to avoid the misuse of the new timestamp framing mode; it's for a regression fix - HD-audio: a revert of the 5.15 change that might work badly, new quirks for Lenovo Legion & co, a follow-up fix for CS8409 - ASoC: lots of SOF-related fixes, fsl component fixes, corrections of mediatek drivers - USB-audio: fix for the PM resume - FireWire: oxfw and motu fixes" * tag 'sound-5.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (25 commits) ALSA: pcsp: Make hrtimer forwarding more robust ALSA: rawmidi: introduce SNDRV_RAWMIDI_IOCTL_USER_PVERSION ALSA: firewire-motu: fix truncated bytes in message tracepoints ASoC: SOF: trace: Omit error print when waking up trace sleepers ASoC: mediatek: mt8195: remove wrong fixup assignment on HDMITX ASoC: SOF: loader: Re-phrase the missing firmware error to avoid duplication ASoC: SOF: loader: release_firmware() on load failure to avoid batching ALSA: hda/cs8409: Setup Dolphin Headset Mic as Phantom Jack ALSA: pcxhr: "fix" PCXHR_REG_TO_PORT definition ASoC: SOF: imx: imx8m: Bar index is only valid for IRAM and SRAM types ASoC: SOF: imx: imx8: Bar index is only valid for IRAM and SRAM types ASoC: SOF: Fix DSP oops stack dump output contents ALSA: hda/realtek: Quirks to enable speaker output for Lenovo Legion 7i 15IMHG05, Yoga 7i 14ITL5/15ITL5, and 13s Gen2 laptops. ALSA: usb-audio: Unify mixer resume and reset_resume procedure Revert "ALSA: hda: Drop workaround for a hang at shutdown again" ALSA: oxfw: fix transmission method for Loud models based on OXFW971 ASoC: mediatek: common: handle NULL case in suspend/resume function ASoC: fsl_xcvr: register platform component before registering cpu dai ASoC: fsl_spdif: register platform component before registering cpu dai ASoC: fsl_micfil: register platform component before registering cpu dai ...
2021-09-29Merge branch 'linus' of ↵Linus Torvalds2-8/+11
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fixes from Herbert Xu: "This contains fixes for a resource leak in ccp as well as stack corruption in x86/sm4" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: x86/sm4 - Fix frame pointer stack corruption crypto: ccp - fix resource leaks in ccp_run_aes_gcm_cmd()
2021-09-29bpf, arm: Fix register clobbering in div/mod implementationJohan Almbladh1-0/+19
On ARM CPUs that lack div/mod instructions, ALU32 BPF_DIV and BPF_MOD are implemented using a call to a helper function. Before, the emitted code for those function calls failed to preserve caller-saved ARM registers. Since some of those registers happen to be mapped to BPF registers, it resulted in eBPF register values being overwritten. This patch emits code to push and pop the remaining caller-saved ARM registers r2-r3 into the stack during the div/mod function call. ARM registers r0-r1 are used as arguments and return value, and those were already saved and restored correctly. Fixes: 39c13c204bb1 ("arm: eBPF JIT compiler") Signed-off-by: Johan Almbladh <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]>
2021-09-29samples/bpf: Relicense bpf_insn.h as GPL-2.0-only OR BSD-2-ClauseLuca Boccassi1-1/+1
libbpf and bpftool have been dual-licensed to facilitate inclusion in software that is not compatible with GPL2-only (ie: Apache2), but the samples are still GPL2-only. Given these files are samples, they get naturally copied around. For example, it is the case for samples/bpf/bpf_insn.h which was copied into the systemd tree: https://github.com/systemd/systemd/blob/main/src/shared/linux/bpf_insn.h Some more context on systemd's needs specifically: Most of systemd is (L)GPL2-or-later, which means there is no perceived incompatibility with Apache2 software and can thus be linked with OpenSSL 3.0. But given this GPL2-only header is included this is currently not possible. Dual-licensing this header solves this problem for us as we are scoping a move to OpenSSL 3.0, see: https://lists.freedesktop.org/archives/systemd-devel/2021-September/046882.html Dual-license this header as GPL-2.0-only OR BSD-2-Clause to follow the same licensing used by libbpf and bpftool: 1bc38b8ff6cc ("libbpf: relicense libbpf as LGPL-2.1 OR BSD-2-Clause") 907b22365115 ("tools: bpftool: dual license all files") Signed-off-by: Luca Boccassi <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Simon Horman <[email protected]> Acked-by: Daniel Mack <[email protected]> Acked-by: Josef Bacik <[email protected]> Acked-by: Joe Stringer <[email protected]> Acked-by: Chenbo Feng <[email protected]> Acked-by: Björn Töpel <[email protected]> Acked-by: Magnus Karlsson <[email protected]> Acked-by: Brendan Jackman <[email protected]> Acked-by: Daniel Borkmann <[email protected]> Acked-by: Alexei Starovoitov <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-09-29net: phy: bcm7xxx: Fixed indirect MMD operationsFlorian Fainelli1-4/+110
When EEE support was added to the 28nm EPHY it was assumed that it would be able to support the standard clause 45 over clause 22 register access method. It turns out that the PHY does not support that, which is the very reason for using the indirect shadow mode 2 bank 3 access method. Implement {read,write}_mmd to allow the standard PHY library routines pertaining to EEE querying and configuration to work correctly on these PHYs. This forces us to implement a __phy_set_clr_bits() function that does not grab the MDIO bus lock since the PHY driver's {read,write}_mmd functions are always called with that lock held. Fixes: 83ee102a6998 ("net: phy: bcm7xxx: add support for 28nm EPHY") Signed-off-by: Florian Fainelli <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-09-29Merge branch 'hns3-fixes'David S. Miller7-73/+60
Guangbin Huang says: ==================== net: hns3: add some fixes for -net This series adds some fixes for the HNS3 ethernet driver. ==================== Signed-off-by: David S. Miller <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.