aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2021-10-05Merge tag 'juno-fixes-5.15' of ↵Arnd Bergmann14-355/+153
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes Juno/Vexpress fixes for v5.15 Bunch of DTS fixes to resolve addressing issues with some of the device nodes, dropping unused/undocumented properties in various nodes, and aligning node names with dtschema. * tag 'juno-fixes-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: arm: dts: vexpress: Fix motherboard bus 'interrupt-map' arm: dts: vexpress: Fix addressing issues with 'motherboard-bus' nodes arm: dts: vexpress-v2p-ca9: Fix the SMB unit-address arm: dts: vexpress: Drop unused properties from motherboard node arm64: dts: arm: drop unused interrupt-names in MHU ARM: dts: arm: align watchdog and mmc node names with dtschema arm64: dts: arm: align watchdog and mmc node names with dtschema arm64: dts: fvp: Remove panel timings Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnd Bergmann <[email protected]>
2021-10-05Merge tag 'qcom-dts-fixes-for-5.15' of ↵Arnd Bergmann1-8/+7
git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes Qualcomm DTS fixes for v5.15 This corrects the use of depricated chipid and clock names, for which support was finally dropped from the driver. It also ensures that the DSI PLL is fed by the correct clock, now that it's being migrated to not rely on global clock names. * tag 'qcom-dts-fixes-for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: ARM: dts: qcom: apq8064: update Adreno clock names ARM: dts: qcom: apq8064: Use 27MHz PXO clock as DSI PLL reference ARM: dts: qcom: apq8064: use compatible which contains chipid Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnd Bergmann <[email protected]>
2021-10-05Merge tag 'at91-fixes-5.15-2' of ↵Arnd Bergmann2-15/+63
git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/fixes AT91 fixes #2 for 5.15: - More fixes for AT91 platform power management code related to the introduction of sama7g5: - management of DDR3L regulator rails for sama7g5ek - loading of TLB on different cores - PIO controller slew-rate settings for sama7g5ek: be aligned with datasheet requirements. * tag 'at91-fixes-5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: dts: at91: sama7g5ek: to not touch slew-rate for SDMMC pins ARM: dts: at91: sama7g5ek: use proper slew-rate settings for GMACs ARM: at91: pm: preload base address of controllers in tlb ARM: at91: pm: group constants and addresses loading ARM: dts: at91: sama7g5ek: add suspend voltage for ddr3l rail Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnd Bergmann <[email protected]>
2021-10-05MAINTAINERS: Add Vignesh to TI K3 platform maintainershipNishanth Menon1-0/+1
Add Vignesh to TI K3 platform maintainership. We will rotate roles for each kernel version to help spread the work load a little better. Signed-off-by: Nishanth Menon <[email protected]> Link: https://lore.kernel.org/r/[email protected]' Signed-off-by: Arnd Bergmann <[email protected]>
2021-10-05Merge tag 'optee-fix-for-v5.15' of ↵Arnd Bergmann1-1/+1
git://git.linaro.org/people/jens.wiklander/linux-tee into arm/fixes Fix OP-TEE shm_pool lint warning * tag 'optee-fix-for-v5.15' of git://git.linaro.org/people/jens.wiklander/linux-tee: tee/optee/shm_pool: fix application of sizeof to pointer Link: https://lore.kernel.org/r/20210915113813.GA509196@jade Signed-off-by: Arnd Bergmann <[email protected]>
2021-10-05netlink: annotate data races around nlk->boundEric Dumazet1-4/+10
While existing code is correct, KCSAN is reporting a data-race in netlink_insert / netlink_sendmsg [1] It is correct to read nlk->bound without a lock, as netlink_autobind() will acquire all needed locks. [1] BUG: KCSAN: data-race in netlink_insert / netlink_sendmsg write to 0xffff8881031c8b30 of 1 bytes by task 18752 on cpu 0: netlink_insert+0x5cc/0x7f0 net/netlink/af_netlink.c:597 netlink_autobind+0xa9/0x150 net/netlink/af_netlink.c:842 netlink_sendmsg+0x479/0x7c0 net/netlink/af_netlink.c:1892 sock_sendmsg_nosec net/socket.c:703 [inline] sock_sendmsg net/socket.c:723 [inline] ____sys_sendmsg+0x360/0x4d0 net/socket.c:2392 ___sys_sendmsg net/socket.c:2446 [inline] __sys_sendmsg+0x1ed/0x270 net/socket.c:2475 __do_sys_sendmsg net/socket.c:2484 [inline] __se_sys_sendmsg net/socket.c:2482 [inline] __x64_sys_sendmsg+0x42/0x50 net/socket.c:2482 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae read to 0xffff8881031c8b30 of 1 bytes by task 18751 on cpu 1: netlink_sendmsg+0x270/0x7c0 net/netlink/af_netlink.c:1891 sock_sendmsg_nosec net/socket.c:703 [inline] sock_sendmsg net/socket.c:723 [inline] __sys_sendto+0x2a8/0x370 net/socket.c:2019 __do_sys_sendto net/socket.c:2031 [inline] __se_sys_sendto net/socket.c:2027 [inline] __x64_sys_sendto+0x74/0x90 net/socket.c:2027 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae value changed: 0x00 -> 0x01 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 18751 Comm: syz-executor.0 Not tainted 5.14.0-rc1-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Fixes: da314c9923fe ("netlink: Replace rhash_portid with bound") Signed-off-by: Eric Dumazet <[email protected]> Reported-by: syzbot <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-10-05net: pcs: xpcs: fix incorrect CL37 AN sequenceWong Vee Khee1-5/+27
According to Synopsys DesignWare Cores Ethernet PCS databook, it is required to disable Clause 37 auto-negotiation by programming bit-12 (AN_ENABLE) to 0 if it is already enabled, before programming various fields of VR_MII_AN_CTRL registers. After all these programming are done, it is then required to enable Clause 37 auto-negotiation by programming bit-12 (AN_ENABLE) to 1. Fixes: b97b5331b8ab ("net: pcs: add C37 SGMII AN support for intel mGbE controller") Cc: Vladimir Oltean <[email protected]> Signed-off-by: Wong Vee Khee <[email protected]> Reviewed-by: Vladimir Oltean <[email protected]> Tested-by: Vladimir Oltean <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-10-05net: sfp: Fix typo in state machine debug stringSean Anderson1-1/+1
The string should be "tx_disable" to match the state enum. Fixes: 4005a7cb4f55 ("net: phy: sftp: print debug message with text, not numbers") Signed-off-by: Sean Anderson <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-10-05USB: cdc-acm: fix break reportingJohan Hovold1-0/+3
A recent change that started reporting break events forgot to push the event to the line discipline, which meant that a detected break would not be reported until further characters had been receive (the port could even have been closed and reopened in between). Fixes: 08dff274edda ("cdc-acm: fix BREAK rx code path adding necessary calls") Cc: [email protected] Acked-by: Oliver Neukum <[email protected]> Signed-off-by: Johan Hovold <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-10-05USB: cdc-acm: fix racy tty buffer accessesJohan Hovold1-0/+5
A recent change that started reporting break events to the line discipline caused the tty-buffer insertions to no longer be serialised by inserting events also from the completion handler for the interrupt endpoint. Completion calls for distinct endpoints are not guaranteed to be serialised. For example, in case a host-controller driver uses bottom-half completion, the interrupt and bulk-in completion handlers can end up running in parallel on two CPUs (high-and low-prio tasklets, respectively) thereby breaking the tty layer's single producer assumption. Fix this by holding the read lock also when inserting characters from the bulk endpoint. Fixes: 08dff274edda ("cdc-acm: fix BREAK rx code path adding necessary calls") Cc: [email protected] Acked-by: Oliver Neukum <[email protected]> Signed-off-by: Johan Hovold <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-10-05usb: gadget: f_uac2: fixed EP-IN wMaxPacketSizePavel Hofman1-4/+10
Async feedback patches broke enumeration on Windows 10 previously fixed by commit 789ea77310f0 ("usb: gadget: f_uac2: always increase endpoint max_packet_size by one audio slot"). While the existing calculation for EP OUT capture for async mode yields size+1 frame due to uac2_opts->fb_max > 0, playback side lost the +1 feature. Therefore the +1 frame addition must be re-introduced for playback. Win10 enumerates the device only when both EP IN and EP OUT max packet sizes are (at least) +1 frame. Fixes: e89bb4288378 ("usb: gadget: u_audio: add real feedback implementation") Cc: stable <[email protected]> Tested-by: Henrik Enquist <[email protected]> Tested-by: Jack Pham <[email protected]> Signed-off-by: Pavel Hofman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-10-05usb: cdc-wdm: Fix check for WWANRikard Falkeborn1-3/+3
CONFIG_WWAN_CORE was with CONFIG_WWAN in commit 89212e160b81 ("net: wwan: Fix WWAN config symbols"), but did not update all users of it. Change it back to use CONFIG_WWAN instead. Fixes: 89212e160b81 ("net: wwan: Fix WWAN config symbols") Cc: <[email protected]> Signed-off-by: Rikard Falkeborn <[email protected]> Acked-by: Oliver Neukum <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-10-05usb: chipidea: ci_hdrc_imx: Also search for 'phys' phandleFabio Estevam1-5/+10
When passing 'phys' in the devicetree to describe the USB PHY phandle (which is the recommended way according to Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt) the following NULL pointer dereference is observed on i.MX7 and i.MX8MM: [ 1.489344] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000098 [ 1.498170] Mem abort info: [ 1.500966] ESR = 0x96000044 [ 1.504030] EC = 0x25: DABT (current EL), IL = 32 bits [ 1.509356] SET = 0, FnV = 0 [ 1.512416] EA = 0, S1PTW = 0 [ 1.515569] FSC = 0x04: level 0 translation fault [ 1.520458] Data abort info: [ 1.523349] ISV = 0, ISS = 0x00000044 [ 1.527196] CM = 0, WnR = 1 [ 1.530176] [0000000000000098] user address but active_mm is swapper [ 1.536544] Internal error: Oops: 96000044 [#1] PREEMPT SMP [ 1.542125] Modules linked in: [ 1.545190] CPU: 3 PID: 7 Comm: kworker/u8:0 Not tainted 5.14.0-dirty #3 [ 1.551901] Hardware name: Kontron i.MX8MM N801X S (DT) [ 1.557133] Workqueue: events_unbound deferred_probe_work_func [ 1.562984] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO BTYPE=--) [ 1.568998] pc : imx7d_charger_detection+0x3f0/0x510 [ 1.573973] lr : imx7d_charger_detection+0x22c/0x510 This happens because the charger functions check for the phy presence inside the imx_usbmisc_data structure (data->usb_phy), but the chipidea core populates the usb_phy passed via 'phys' inside 'struct ci_hdrc' (ci->usb_phy) instead. This causes the NULL pointer dereference inside imx7d_charger_detection(). Fix it by also searching for 'phys' in case 'fsl,usbphy' is not found. Tested on a imx7s-warp board. Fixes: 746f316b753a ("usb: chipidea: introduce imx7d USB charger detection") Cc: [email protected] Reported-by: Heiko Thiery <[email protected]> Tested-by: Frieder Schrempf <[email protected]> Reviewed-by: Frieder Schrempf <[email protected]> Acked-by: Peter Chen <[email protected]> Signed-off-by: Fabio Estevam <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-10-05usb: typec: tcpm: handle SRC_STARTUP state if cc changesXu Yang1-0/+1
TCPM for DRP should do the same action as SRC_ATTACHED when cc changes in SRC_STARTUP state. Otherwise, TCPM will transition to SRC_UNATTACHED state which is not satisfied with the Type-C spec. Per Type-C spec: DRP port should move to Unattached.SNK instead of Unattached.SRC if sink removed. Fixes: 4b4e02c83167 ("typec: tcpm: Move out of staging") cc: <[email protected]> Reviewed-by: Guenter Roeck <[email protected]> Acked-by: Heikki Krogerus <[email protected]> Signed-off-by: Xu Yang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-10-05usb: typec: tcpci: don't handle vSafe0V event if it's not enabledXu Yang1-1/+1
USB TCPCI Spec, 4.4.3 Mask Registers: "A masked register will still indicate in the ALERT register, but shall not set the Alert# pin low." Thus, the Extended Status will still indicate in ALERT register if vSafe0V is detected by TCPC even though being masked. In current code, howerer, this event will not be handled in detection time. Rather it will be handled when next ALERT event coming(CC evnet, PD event, etc). Tcpm might transition to a wrong state in this situation. Thus, the vSafe0V event should not be handled when it's masked. Fixes: 766c485b86ef ("usb: typec: tcpci: Add support to report vSafe0V") cc: <[email protected]> Reviewed-by: Guenter Roeck <[email protected]> Acked-by: Heikki Krogerus <[email protected]> Signed-off-by: Xu Yang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-10-05usb: typec: tipd: Remove dependency on "connector" child fwnodeHeikki Krogerus1-5/+3
There is no "connector" child node available on every platform, so the driver can't fail to probe when it's missing. Fixes: 57560ee95cb7 ("usb: typec: tipd: Don't block probing of consumer of "connector" nodes") Cc: [email protected] # 5.14+ Reported-by: "Regupathy, Rajaram" <[email protected]> Signed-off-by: Heikki Krogerus <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-10-05net/sched: sch_taprio: properly cancel timer from taprio_destroy()Eric Dumazet1-0/+4
There is a comment in qdisc_create() about us not calling ops->reset() in some cases. err_out4: /* * Any broken qdiscs that would require a ops->reset() here? * The qdisc was never in action so it shouldn't be necessary. */ As taprio sets a timer before actually receiving a packet, we need to cancel it from ops->destroy, just in case ops->reset has not been called. syzbot reported: ODEBUG: free active (active state 0) object type: hrtimer hint: advance_sched+0x0/0x9a0 arch/x86/include/asm/atomic64_64.h:22 WARNING: CPU: 0 PID: 8441 at lib/debugobjects.c:505 debug_print_object+0x16e/0x250 lib/debugobjects.c:505 Modules linked in: CPU: 0 PID: 8441 Comm: syz-executor813 Not tainted 5.14.0-rc6-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:debug_print_object+0x16e/0x250 lib/debugobjects.c:505 Code: ff df 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 af 00 00 00 48 8b 14 dd e0 d3 e3 89 4c 89 ee 48 c7 c7 e0 c7 e3 89 e8 5b 86 11 05 <0f> 0b 83 05 85 03 92 09 01 48 83 c4 18 5b 5d 41 5c 41 5d 41 5e c3 RSP: 0018:ffffc9000130f330 EFLAGS: 00010282 RAX: 0000000000000000 RBX: 0000000000000003 RCX: 0000000000000000 RDX: ffff88802baeb880 RSI: ffffffff815d87b5 RDI: fffff52000261e58 RBP: 0000000000000001 R08: 0000000000000000 R09: 0000000000000000 R10: ffffffff815d25ee R11: 0000000000000000 R12: ffffffff898dd020 R13: ffffffff89e3ce20 R14: ffffffff81653630 R15: dffffc0000000000 FS: 0000000000f0d300(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffb64b3e000 CR3: 0000000036557000 CR4: 00000000001506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: __debug_check_no_obj_freed lib/debugobjects.c:987 [inline] debug_check_no_obj_freed+0x301/0x420 lib/debugobjects.c:1018 slab_free_hook mm/slub.c:1603 [inline] slab_free_freelist_hook+0x171/0x240 mm/slub.c:1653 slab_free mm/slub.c:3213 [inline] kfree+0xe4/0x540 mm/slub.c:4267 qdisc_create+0xbcf/0x1320 net/sched/sch_api.c:1299 tc_modify_qdisc+0x4c8/0x1a60 net/sched/sch_api.c:1663 rtnetlink_rcv_msg+0x413/0xb80 net/core/rtnetlink.c:5571 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2504 netlink_unicast_kernel net/netlink/af_netlink.c:1314 [inline] netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1340 netlink_sendmsg+0x86d/0xdb0 net/netlink/af_netlink.c:1929 sock_sendmsg_nosec net/socket.c:704 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:724 ____sys_sendmsg+0x6e8/0x810 net/socket.c:2403 ___sys_sendmsg+0xf3/0x170 net/socket.c:2457 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2486 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 Fixes: 44d4775ca518 ("net/sched: sch_taprio: reset child qdiscs before freeing them") Signed-off-by: Eric Dumazet <[email protected]> Cc: Davide Caratti <[email protected]> Reported-by: syzbot <[email protected]> Acked-by: Vinicius Costa Gomes <[email protected]> Acked-by: Davide Caratti <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-10-05Partially revert "usb: Kconfig: using select for USB_COMMON dependency"Ben Hutchings1-2/+1
This reverts commit cb9c1cfc86926d0e86d19c8e34f6c23458cd3478 for USB_LED_TRIG. This config symbol has bool type and enables extra code in usb_common itself, not a separate driver. Enabling it should not force usb_common to be built-in! Fixes: cb9c1cfc8692 ("usb: Kconfig: using select for USB_COMMON dependency") Cc: stable <[email protected]> Signed-off-by: Ben Hutchings <[email protected]> Signed-off-by: Salvatore Bonaccorso <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-10-05usb: dwc3: gadget: Revert "set gadgets parent to the right controller"Andy Shevchenko1-1/+1
The commit c6e23b89a95d ("usb: dwc3: gadget: set gadgets parent to the right controller") changed the device for the UDC and broke the user space scripts that instantiate the USB gadget(s) via ConfigFS. Revert it for now until the better solution will be proposed. Fixes: c6e23b89a95d ("usb: dwc3: gadget: set gadgets parent to the right controller") Tested-by: Ferry Toth <[email protected]> Cc: Michael Grzeschik <[email protected]> Cc: Felipe Balbi <[email protected]> Signed-off-by: Andy Shevchenko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-10-05Merge branch 'bridge-fixes'David S. Miller1-1/+2
Eric Dumazet says: ==================== net: bridge: br_get_linkxstats_size() fixes This patch series attempts to fix the following syzbot report. WARNING: CPU: 1 PID: 21425 at net/core/rtnetlink.c:5388 rtnl_stats_get+0x80f/0x8c0 net/core/rtnetlink.c:5388 Modules linked in: CPU: 1 PID: 21425 Comm: syz-executor394 Not tainted 5.13.0-rc4-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:rtnl_stats_get+0x80f/0x8c0 net/core/rtnetlink.c:5388 Code: e9 9c fc ff ff 4c 89 e7 89 0c 24 e8 ab 8b a8 fa 8b 0c 24 e9 bc fc ff ff 4c 89 e7 e8 9b 8b a8 fa e9 df fe ff ff e8 61 85 63 fa <0f> 0b e9 f7 fc ff ff 41 be ea ff ff ff e9 f9 fc ff ff 41 be 97 ff RSP: 0018:ffffc9000cf77688 EFLAGS: 00010293 RAX: 0000000000000000 RBX: 000000000000012c RCX: 0000000000000000 RDX: ffff8880211754c0 RSI: ffffffff8711571f RDI: 0000000000000003 RBP: ffff8880175aa780 R08: 00000000ffffffa6 R09: ffff88823bd5c04f R10: ffffffff87115413 R11: 0000000000000001 R12: ffff8880175aab74 R13: ffff8880175aab40 R14: 00000000ffffffa6 R15: 0000000000000006 FS: 0000000001ff9300(0000) GS:ffff8880b9c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000005cfd58 CR3: 000000002cd43000 CR4: 00000000001506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: rtnetlink_rcv_msg+0x44e/0xad0 net/core/rtnetlink.c:5562 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2504 netlink_unicast_kernel net/netlink/af_netlink.c:1314 [inline] netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1340 netlink_sendmsg+0x856/0xd90 net/netlink/af_netlink.c:1929 sock_sendmsg_nosec net/socket.c:654 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:674 ____sys_sendmsg+0x6e8/0x810 net/socket.c:2350 ___sys_sendmsg+0xf3/0x170 net/socket.c:2404 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2433 do_syscall_64+0x3a/0xb0 arch/x86/entry/common.c:47 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x4440d9 ==================== Signed-off-by: David S. Miller <[email protected]>
2021-10-05net: bridge: fix under estimation in br_get_linkxstats_size()Eric Dumazet1-0/+1
Commit de1799667b00 ("net: bridge: add STP xstats") added an additional nla_reserve_64bit() in br_fill_linkxstats(), but forgot to update br_get_linkxstats_size() accordingly. This can trigger the following in rtnl_stats_get() WARN_ON(err == -EMSGSIZE); Fixes: de1799667b00 ("net: bridge: add STP xstats") Signed-off-by: Eric Dumazet <[email protected]> Cc: Vivien Didelot <[email protected]> Cc: Nikolay Aleksandrov <[email protected]> Acked-by: Nikolay Aleksandrov <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-10-05net: bridge: use nla_total_size_64bit() in br_get_linkxstats_size()Eric Dumazet1-1/+1
bridge_fill_linkxstats() is using nla_reserve_64bit(). We must use nla_total_size_64bit() instead of nla_total_size() for corresponding data structure. Fixes: 1080ab95e3c7 ("net: bridge: add support for IGMP/MLD stats and export them via netlink") Signed-off-by: Eric Dumazet <[email protected]> Cc: Nikolay Aleksandrov <[email protected]> Cc: Vivien Didelot <[email protected]> Acked-by: Nikolay Aleksandrov <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-10-05usb: xhci: tegra: mark PM functions as __maybe_unusedArnd Bergmann1-8/+4
The added #ifdefs in the PM rework were almost correct, but still cause warnings in some randconfig builds: drivers/usb/host/xhci-tegra.c:2147:12: error: 'tegra_xusb_resume' defined but not used [-Werror=unused-function] 2147 | static int tegra_xusb_resume(struct device *dev) | ^~~~~~~~~~~~~~~~~ drivers/usb/host/xhci-tegra.c:2105:12: error: 'tegra_xusb_suspend' defined but not used [-Werror=unused-function] 2105 | static int tegra_xusb_suspend(struct device *dev) Replace the #ifdef checks with simpler __maybe_unused annotations to reliably shut up these warnings. Link: https://lore.kernel.org/all/[email protected]/ Fixes: 971ee247060d ("usb: xhci: tegra: Enable ELPG for runtime/system PM") Reviewed-by: JC Kuo <[email protected]> Signed-off-by: Arnd Bergmann <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-10-05r8152: avoid to resubmit rx immediatelyHayes Wang1-1/+15
For the situation that the disconnect event comes very late when the device is unplugged, the driver would resubmit the RX bulk transfer after getting the callback with -EPROTO immediately and continually. Finally, soft lockup occurs. This patch avoids to resubmit RX immediately. It uses a workqueue to schedule the RX NAPI. And the NAPI would resubmit the RX. It let the disconnect event have opportunity to stop the submission before soft lockup. Reported-by: Jason-ch Chen <[email protected]> Tested-by: Jason-ch Chen <[email protected]> Signed-off-by: Hayes Wang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-10-05etherdevice: use __dev_addr_set()Jakub Kicinski1-1/+1
Andrew points out that eth_hw_addr_set() replaces memcpy() calls so we can't use ether_addr_copy() which assumes both arguments are 2-bytes aligned. Reported-by: Andrew Lunn <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-10-05afs: Fix afs_launder_page() to set correct start file positionDavid Howells1-2/+1
Fix afs_launder_page() to set the starting position of the StoreData RPC at the offset into the page at which the modified data starts instead of at the beginning of the page (the iov_iter is correctly offset). The offset got lost during the conversion to passing an iov_iter into afs_store_data(). Changes: ver #2: - Use page_offset() rather than manually calculating it[1]. Fixes: bd80d8a80e12 ("afs: Use ITER_XARRAY for writing") Signed-off-by: David Howells <[email protected]> Reviewed-by: Jeffrey Altman <[email protected]> cc: Marc Dionne <[email protected]> cc: [email protected] Link: https://lore.kernel.org/r/YST/[email protected]/ [1] Link: https://lore.kernel.org/r/162880783179.3421678.7795105718190440134.stgit@warthog.procyon.org.uk/ # v1 Link: https://lore.kernel.org/r/162937512409.1449272.18441473411207824084.stgit@warthog.procyon.org.uk/ # v1 Link: https://lore.kernel.org/r/162981148752.1901565.3663780601682206026.stgit@warthog.procyon.org.uk/ # v1 Link: https://lore.kernel.org/r/163005741670.2472992.2073548908229887941.stgit@warthog.procyon.org.uk/ # v2 Link: https://lore.kernel.org/r/163221839087.3143591.14278359695763025231.stgit@warthog.procyon.org.uk/ # v2 Link: https://lore.kernel.org/r/163292980654.4004896.7134735179887998551.stgit@warthog.procyon.org.uk/ # v2
2021-10-05netfs: Fix READ/WRITE confusion when calling iov_iter_xarray()David Howells1-1/+1
Fix netfs_clear_unread() to pass READ to iov_iter_xarray() instead of WRITE (the flag is about the operation accessing the buffer, not what sort of access it is doing to the buffer). Fixes: 3d3c95046742 ("netfs: Provide readahead and readpage netfs helpers") Signed-off-by: David Howells <[email protected]> Reviewed-by: Jeff Layton <[email protected]> cc: [email protected] cc: [email protected] cc: [email protected] cc: [email protected] cc: [email protected] cc: [email protected] cc: [email protected] cc: [email protected] Link: https://lore.kernel.org/r/162729351325.813557.9242842205308443901.stgit@warthog.procyon.org.uk/ Link: https://lore.kernel.org/r/162886603464.3940407.3790841170414793899.stgit@warthog.procyon.org.uk Link: https://lore.kernel.org/r/163239074602.1243337.14154704004485867017.stgit@warthog.procyon.org.uk
2021-10-05cachefiles: Fix oops with cachefiles_cull() due to NULL objectDave Wysochanski1-2/+2
When cachefiles_cull() calls cachefiles_bury_object(), it passes a NULL object. When this occurs, either trace_cachefiles_unlink() or trace_cachefiles_rename() may oops due to the NULL object. Check for NULL object in the tracepoint and if so, set debug_id to MAX_UINT as was done in 2908f5e101e3. The following oops was seen with xfstests generic/100. BUG: kernel NULL pointer dereference, address: 0000000000000010 ... RIP: 0010:trace_event_raw_event_cachefiles_unlink+0x4e/0xa0 [cachefiles] ... Call Trace: cachefiles_bury_object+0x242/0x430 [cachefiles] ? __vfs_removexattr_locked+0x10f/0x150 ? vfs_removexattr+0x51/0xd0 cachefiles_cull+0x84/0x120 [cachefiles] cachefiles_daemon_cull+0xd1/0x120 [cachefiles] cachefiles_daemon_write+0x158/0x190 [cachefiles] vfs_write+0xbc/0x260 ksys_write+0x4f/0xc0 do_syscall_64+0x3b/0x90 The following oops was seen with xfstests generic/290. BUG: kernel NULL pointer dereference, address: 0000000000000010 ... RIP: 0010:trace_event_raw_event_cachefiles_rename+0x54/0xa0 [cachefiles] ... Call Trace: cachefiles_bury_object+0x35c/0x430 [cachefiles] cachefiles_cull+0x84/0x120 [cachefiles] cachefiles_daemon_cull+0xd1/0x120 [cachefiles] cachefiles_daemon_write+0x158/0x190 [cachefiles] vfs_write+0xbc/0x260 ksys_write+0x4f/0xc0 do_syscall_64+0x3b/0x90 Fixes: 2908f5e101e3 ("fscache: Add a cookie debug ID and use that in traces") Signed-off-by: Dave Wysochanski <[email protected]> Signed-off-by: David Howells <[email protected]> Link: https://listman.redhat.com/archives/linux-cachefs/2021-October/msg00009.html
2021-10-05drm/i915: Extend the async flip VT-d w/a to skl/bxtVille Syrjälä2-0/+17
Looks like skl/bxt/derivatives also need the plane stride stretch w/a when using async flips and VT-d is enabled, or else we get corruption on screen. To my surprise this was even documented in bspec, but only as a note on the CHICHKEN_PIPESL register description rather than on the w/a list. So very much the same thing as on HSW/BDW, except the bits moved yet again. Cc: [email protected] Cc: Karthik B S <[email protected]> Fixes: 55ea1cb178ef ("drm/i915: Enable async flips in i915") Signed-off-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Reviewed-by: Matt Roper <[email protected]> (cherry picked from commit d08df3b0bdb25546e86dc9a6c4e3ec0c43832299) Signed-off-by: Jani Nikula <[email protected]>
2021-10-05drm/i915/bdb: Fix version checkLukasz Majczak2-6/+21
With patch "drm/i915/vbt: Fix backlight parsing for VBT 234+" the size of bdb_lfp_backlight_data structure has been increased, causing if-statement in the parse_lfp_backlight function that comapres this structure size to the one retrieved from BDB, always to fail for older revisions. This patch calculates expected size of the structure for a given BDB version and compares it with the value gathered from BDB. Tested on Chromebook Pixelbook (Nocturne) (reports bdb->version = 221) Fixes: d381baad29b4 ("drm/i915/vbt: Fix backlight parsing for VBT 234+") Tested-by: Lukasz Majczak <[email protected]> Signed-off-by: Lukasz Majczak <[email protected]> Reviewed-by: José Roberto de Souza <[email protected]> Signed-off-by: José Roberto de Souza <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit 4378daf5d04eed59724e6d0e74755e17dce2e105) Signed-off-by: Jani Nikula <[email protected]>
2021-10-05drm/i915/tc: Fix TypeC port init/resume time sanitizationImre Deak3-18/+20
Atm during driver loading and system resume TypeC ports are accessed before their HW/SW state is synced. Move the TypeC port sanitization to the encoder's sync_state hook to fix this. v2: Handle the encoder disabled case in gen11_dsi_sync_state() as well (Jose, Jani) Fixes: f9e76a6e68d3 ("drm/i915: Add an encoder hook to sanitize its state during init/resume") Cc: José Roberto de Souza <[email protected]> Cc: Ville Syrjälä <[email protected]> Signed-off-by: Imre Deak <[email protected]> Reviewed-by: José Roberto de Souza <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit 7194dc998dfffca096c30b3cd39625158608992d) Signed-off-by: Jani Nikula <[email protected]>
2021-10-05drm/i915: Fix runtime pm handling in i915_gem_shrinkMaarten Lankhorst1-2/+5
We forgot to call intel_runtime_pm_put on error, fix it! Signed-off-by: Maarten Lankhorst <[email protected]> Fixes: cf41a8f1dc1e ("drm/i915: Finally remove obj->mm.lock.") Cc: Thomas Hellström <[email protected]> Cc: Daniel Vetter <[email protected]> Cc: <[email protected]> # v5.13+ Reviewed-by: Thomas Hellström <[email protected]> Reviewed-by: Niranjana Vishwanathapura <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit 239f3c2ee18376587026efecaea5250fa5926d20) Signed-off-by: Jani Nikula <[email protected]>
2021-10-05drm/i915/audio: Use BIOS provided value for RKL HDA linkKai-Heng Feng1-2/+3
Commit 989634fb49ad ("drm/i915/audio: set HDA link parameters in driver") makes HDMI audio on Lenovo P350 disappear. So in addition to TGL, extend the logic to RKL to use BIOS provided value to fix the regression. Fixes: 989634fb49ad ("drm/i915/audio: set HDA link parameters in driver") Reviewed-by: Kai Vehmanen <[email protected]> Signed-off-by: Kai-Heng Feng <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit c6b40ee330fe09b332715bb7ec1467e4fcbe2e65) Signed-off-by: Jani Nikula <[email protected]>
2021-10-05xen/x86: adjust data placementJan Beulich2-3/+5
Both xen_pvh and xen_start_flags get written just once early during init. Using the respective annotation then allows the open-coded placing in .data to go away. Additionally the former, like the latter, wants exporting, or else xen_pvh_domain() can't be used from modules. Signed-off-by: Jan Beulich <[email protected]> Reviewed-by: Juergen Gross <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Juergen Gross <[email protected]>
2021-10-05x86/PVH: adjust function/data placementJan Beulich1-6/+6
Two of the variables can live in .init.data, allowing the open-coded placing in .data to go away. Another "variable" is used to communicate a size value only to very early assembly code, which hence can be both const and live in .init.*. Additionally two functions were lacking __init annotations. Signed-off-by: Jan Beulich <[email protected]> Reviewed-by: Juergen Gross <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Juergen Gross <[email protected]>
2021-10-05xen/x86: hook up xen_banner() also for PVHJan Beulich4-11/+16
This was effectively lost while dropping PVHv1 code. Move the function and arrange for it to be called the same way as done in PV mode. Clearly this then needs re-introducing the XENFEAT_mmu_pt_update_preserve_ad check that was recently removed, as that's a PV-only feature. Since the string pointed at by pv_info.name describes the mode, drop "paravirtualized" from the log message while moving the code. Signed-off-by: Jan Beulich <[email protected]> Reviewed-by: Juergen Gross <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Juergen Gross <[email protected]>
2021-10-05xen/x86: generalize preferred console model from PV to PVH Dom0Jan Beulich4-7/+18
Without announcing hvc0 as preferred it won't get used as long as tty0 gets registered earlier. This is particularly problematic with there not being any screen output for PVH Dom0 when the screen is in graphics mode, as the necessary information doesn't get conveyed yet from the hypervisor. Follow PV's model, but be conservative and do this for Dom0 only for now. Signed-off-by: Jan Beulich <[email protected]> Reviewed-by: Juergen Gross <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Juergen Gross <[email protected]>
2021-10-05xen/x86: make "earlyprintk=xen" work for HVM/PVH DomUJan Beulich2-4/+2
xenboot_write_console() is dealing with these quite fine so I don't see why xenboot_console_setup() would return -ENOENT in this case. Adjust documentation accordingly. Signed-off-by: Jan Beulich <[email protected]> Reviewed-by: Juergen Gross <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Juergen Gross <[email protected]>
2021-10-05xen/x86: allow "earlyprintk=xen" to work for PV Dom0Jan Beulich1-1/+1
With preferred consoles "tty" and "hvc" announced as preferred, registering "xenboot" early won't result in use of the console: It also needs to be registered as preferred. Generalize this from being DomU- only so far. Signed-off-by: Jan Beulich <[email protected]> Reviewed-by: Juergen Gross <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Juergen Gross <[email protected]>
2021-10-05xen/x86: make "earlyprintk=xen" work better for PVH Dom0Jan Beulich1-5/+4
The xen_hvm_early_write() path better wouldn't be taken in this case; while port 0xE9 can be used, the hypercall path is quite a bit more efficient. Put that first, as it may also work for DomU-s (see also xen_raw_console_write()). While there also bail from the function when the first domU_write_console() failed - later ones aren't going to succeed. Signed-off-by: Jan Beulich <[email protected]> Reviewed-by: Juergen Gross <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Juergen Gross <[email protected]>
2021-10-05xen/x86: allow PVH Dom0 without XEN_PV=yJan Beulich8-37/+49
Decouple XEN_DOM0 from XEN_PV, converting some existing uses of XEN_DOM0 to a new XEN_PV_DOM0. (I'm not convinced all are really / should really be PV-specific, but for starters I've tried to be conservative.) For PVH Dom0 the hypervisor populates MADT with only x2APIC entries, so without x2APIC support enabled in the kernel things aren't going to work very well. (As opposed, DomU-s would only ever see LAPIC entries in MADT as of now.) Note that this then requires PVH Dom0 to be 64-bit, as X86_X2APIC depends on X86_64. In the course of this xen_running_on_version_or_later() needs to be available more broadly. Move it from a PV-specific to a generic file, considering that what it does isn't really PV-specific at all anyway. Note that xen/interface/version.h cannot be included on its own; in enlighten.c, which uses SCHEDOP_* anyway, include xen/interface/sched.h first to resolve the apparently sole missing type (xen_ulong_t). Signed-off-by: Jan Beulich <[email protected]> Reviewed-by: Juergen Gross <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Juergen Gross <[email protected]>
2021-10-05xen/x86: prevent PVH type from getting clobberedJan Beulich1-5/+4
Like xen_start_flags, xen_domain_type gets set before .bss gets cleared. Hence this variable also needs to be prevented from getting put in .bss, which is possible because XEN_NATIVE is an enumerator evaluating to zero. Any use prior to init_hvm_pv_info() setting the variable again would lead to wrong decisions; one such case is xenboot_console_setup() when called as a result of "earlyprintk=xen". Use __ro_after_init as more applicable than either __section(".data") or __read_mostly. Signed-off-by: Jan Beulich <[email protected]> Reviewed-by: Juergen Gross <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Juergen Gross <[email protected]>
2021-10-05arm64: dts: imx8m*-venice-gw7902: fix M2_RST# gpioTim Harvey2-2/+2
Fix invalid M2_RST# gpio pinmux. Fixes: ef484dfcf6f7 ("arm64: dts: imx: Add i.mx8mm/imx8mn Gateworks gw7902 dts support") Cc: [email protected] Signed-off-by: Tim Harvey <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2021-10-05xen/privcmd: drop "pages" parameter from xen_remap_pfn()Jan Beulich3-13/+9
The function doesn't use it and all of its callers say in a comment that their respective arguments are to be non-NULL only in auto-translated mode. Since xen_remap_domain_mfn_array() isn't supposed to be used by non-PV, drop the parameter there as well. It was bogusly passed as non- NULL (PRIV_VMA_LOCKED) by its only caller anyway. For xen_remap_domain_gfn_range(), otoh, it's not clear at all why this wouldn't want / might not need to gain auto-translated support down the road, so the parameter is retained there despite now remaining unused (and the only caller passing NULL); correct a respective comment as well. Signed-off-by: Jan Beulich <[email protected]> Reviewed-by: Boris Ostrovsky <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Juergen Gross <[email protected]>
2021-10-05xen/privcmd: fix error handling in mmap-resource processingJan Beulich1-3/+4
xen_pfn_t is the same size as int only on 32-bit builds (and not even on Arm32). Hence pfns[] can't be used directly to read individual error values returned from xen_remap_domain_mfn_array(); every other error indicator would be skipped/ignored on 64-bit. Fixes: 3ad0876554ca ("xen/privcmd: add IOCTL_PRIVCMD_MMAP_RESOURCE") Cc: [email protected] Signed-off-by: Jan Beulich <[email protected]> Reviewed-by: Boris Ostrovsky <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Juergen Gross <[email protected]>
2021-10-05xen/privcmd: replace kcalloc() by kvcalloc() when allocating empty pagesJan Beulich1-3/+3
Osstest has been suffering test failures for a little while from order-4 allocation failures, resulting from alloc_empty_pages() calling kcalloc(). As there's no need for physically contiguous space here, switch to kvcalloc(). Signed-off-by: Jan Beulich <[email protected]> Reviewed-by: Juergen Gross <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Juergen Gross <[email protected]>
2021-10-05ARM: imx6: disable the GIC CPU interface before calling stby-poweroff sequenceOleksij Rempel1-0/+2
Any pending interrupt can prevent entering standby based power off state. To avoid it, disable the GIC CPU interface. Fixes: 8148d2136002 ("ARM: imx6: register pm_power_off handler if "fsl,pmic-stby-poweroff" is set") Signed-off-by: Oleksij Rempel <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2021-10-04scsi: iscsi: Fix iscsi_task use after freeMike Christie1-6/+9
Commit d39df158518c ("scsi: iscsi: Have abort handler get ref to conn") added iscsi_get_conn()/iscsi_put_conn() calls during abort handling but then also changed the handling of the case where we detect an already completed task where we now end up doing a goto to the common put/cleanup code. This results in a iscsi_task use after free, because the common cleanup code will do a put on the iscsi_task. This reverts the goto and moves the iscsi_get_conn() to after we've checked if the iscsi_task is valid. Link: https://lore.kernel.org/r/[email protected] Fixes: d39df158518c ("scsi: iscsi: Have abort handler get ref to conn") Signed-off-by: Mike Christie <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2021-10-04scsi: lpfc: Fix memory overwrite during FC-GS I/O abort handlingJames Smart1-4/+7
When an FC-GS I/O is aborted by lpfc, the driver requires a node pointer for a dereference operation. In the abort I/O routine, the driver miscasts a context pointer to the wrong data type and overwrites a single byte outside of the allocated space. This miscast is done in the abort I/O function handler because the handler works on both FC-GS and FC-LS commands. However, the code neglected to get the correct job location for the node. Fix this by acquiring the necessary node pointer from the correct job structure depending on the I/O type. Link: https://lore.kernel.org/r/[email protected] Co-developed-by: Justin Tee <[email protected]> Signed-off-by: Justin Tee <[email protected]> Signed-off-by: James Smart <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2021-10-04scsi: elx: efct: Delete stray unlock statementDan Carpenter1-2/+1
It's not holding the lock at this stage and the IRQ "flags" are not correct so it would restore something bogus. Delete the unlock statement. Link: https://lore.kernel.org/r/20211004103851.GE25015@kili Fixes: 3e6414003bf9 ("scsi: elx: efct: SCSI I/O handling routines") Signed-off-by: Dan Carpenter <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.