aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2020-06-20Merge branch 'i2c/for-current' of ↵Linus Torvalds10-48/+25
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: - a small collection of remaining API conversion patches (all acked) which allow to finally remove the deprecated API - some documentation fixes and a MAINTAINERS addition * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: MAINTAINERS: Add robert and myself as qcom i2c cci maintainers i2c: smbus: Fix spelling mistake in the comments Documentation/i2c: SMBus start signal is S not A i2c: remove deprecated i2c_new_device API Documentation: media: convert to use i2c_new_client_device() video: backlight: tosa_lcd: convert to use i2c_new_client_device() x86/platform/intel-mid: convert to use i2c_new_client_device() drm: encoder_slave: use new I2C API drm: encoder_slave: fix refcouting error for modules
2020-06-21drm: rcar-du: Fix build errorDaniel Gomez1-0/+1
Select DRM_KMS_HELPER dependency. Build error when DRM_KMS_HELPER is not selected: drivers/gpu/drm/rcar-du/rcar_lvds.o:(.rodata+0xd48): undefined reference to `drm_atomic_helper_bridge_duplicate_state' drivers/gpu/drm/rcar-du/rcar_lvds.o:(.rodata+0xd50): undefined reference to `drm_atomic_helper_bridge_destroy_state' drivers/gpu/drm/rcar-du/rcar_lvds.o:(.rodata+0xd70): undefined reference to `drm_atomic_helper_bridge_reset' drivers/gpu/drm/rcar-du/rcar_lvds.o:(.rodata+0xdc8): undefined reference to `drm_atomic_helper_connector_reset' drivers/gpu/drm/rcar-du/rcar_lvds.o:(.rodata+0xde0): undefined reference to `drm_helper_probe_single_connector_modes' drivers/gpu/drm/rcar-du/rcar_lvds.o:(.rodata+0xe08): undefined reference to `drm_atomic_helper_connector_duplicate_state' drivers/gpu/drm/rcar-du/rcar_lvds.o:(.rodata+0xe10): undefined reference to `drm_atomic_helper_connector_destroy_state' Fixes: c6a27fa41fab ("drm: rcar-du: Convert LVDS encoder code to bridge driver") Cc: <[email protected]> Signed-off-by: Daniel Gomez <[email protected]> Reviewed-by: Emil Velikov <[email protected]> Reviewed-by: Kieran Bingham <[email protected]> Reviewed-by: Laurent Pinchart <[email protected]> Signed-off-by: Laurent Pinchart <[email protected]>
2020-06-20tc-testing: update geneve options match in tunnel_key unit testsHangbin Liu1-7/+7
Since iproute2 commit f72c3ad00f3b ("tc: m_tunnel_key: add options support for vxlan"), the geneve opt output use key word "geneve_opts" instead of "geneve_opt". To make compatibility for both old and new iproute2, let's accept both "geneve_opt" and "geneve_opts". Suggested-by: Davide Caratti <[email protected]> Signed-off-by: Hangbin Liu <[email protected]> Reviewed-by: Simon Horman <[email protected]> Tested-by: Davide Caratti <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-06-20r8169: fix firmware not resetting tp->ocp_baseHeiner Kallweit1-1/+4
Typically the firmware takes care that tp->ocp_base is reset to its default value. That's not the case (at least) for RTL8117. As a result subsequent PHY access reads/writes the wrong page and the link is broken. Fix this be resetting tp->ocp_base explicitly. Fixes: 229c1e0dfd3d ("r8169: load firmware for RTL8168fp/RTL8117") Reported-by: Aaron Ma <[email protected]> Tested-by: Aaron Ma <[email protected]> Signed-off-by: Heiner Kallweit <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-06-20ibmvnic: continue to init in CRQ reset returns H_CLOSEDDany Madden1-2/+7
Continue the reset path when partner adapter is not ready or H_CLOSED is returned from reset crq. This patch allows the CRQ init to proceed to establish a valid CRQ for traffic to flow after reset. Signed-off-by: Dany Madden <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-06-20ionic: tame the watchdog timer on reconfigShannon Nelson1-7/+8
Even with moving netif_tx_disable() to an earlier point when taking down the queues for a reconfiguration, we still end up with the occasional netdev watchdog Tx Timeout complaint. The old method of using netif_trans_update() works fine for queue 0, but has no effect on the remaining queues. Using netif_device_detach() allows us to signal to the watchdog to ignore us for the moment. Fixes: beead698b173 ("ionic: Add the basic NDO callbacks for netdev support") Signed-off-by: Shannon Nelson <[email protected]> Acked-by: Jonathan Toppins <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-06-20pinctrl: single: fix function name in documentationDrew Fustini1-1/+1
Use the correct the function name in the documentation for "pcs_parse_one_pinctrl_entry()". "smux_parse_one_pinctrl_entry()" appears to be an artifact from the development of a prior patch series ("simple pinmux driver") which transformed into pinctrl-single. Signed-off-by: Drew Fustini <[email protected]> Link: https://lore.kernel.org/r/20200612112758.GA3407886@x1 Signed-off-by: Linus Walleij <[email protected]>
2020-06-20Merge tag 'trace-v5.8-rc1' of ↵Linus Torvalds15-67/+239
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fixes from Steven Rostedt: - Have recordmcount work with > 64K sections (to support LTO) - kprobe RCU fixes - Correct a kprobe critical section with missing mutex - Remove redundant arch_disarm_kprobe() call - Fix lockup when kretprobe triggers within kprobe_flush_task() - Fix memory leak in fetch_op_data operations - Fix sleep in atomic in ftrace trace array sample code - Free up memory on failure in sample trace array code - Fix incorrect reporting of function_graph fields in format file - Fix quote within quote parsing in bootconfig - Fix return value of bootconfig tool - Add testcases for bootconfig tool - Fix maybe uninitialized warning in ftrace pid file code - Remove unused variable in tracing_iter_reset() - Fix some typos * tag 'trace-v5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: ftrace: Fix maybe-uninitialized compiler warning tools/bootconfig: Add testcase for show-command and quotes test tools/bootconfig: Fix to return 0 if succeeded to show the bootconfig tools/bootconfig: Fix to use correct quotes for value proc/bootconfig: Fix to use correct quotes for value tracing: Remove unused event variable in tracing_iter_reset tracing/probe: Fix memleak in fetch_op_data operations trace: Fix typo in allocate_ftrace_ops()'s comment tracing: Make ftrace packed events have align of 1 sample-trace-array: Remove trace_array 'sample-instance' sample-trace-array: Fix sleeping function called from invalid context kretprobe: Prevent triggering kretprobe from within kprobe_flush_task kprobes: Remove redundant arch_disarm_kprobe() call kprobes: Fix to protect kick_kprobe_optimizer() by kprobe_mutex kprobes: Use non RCU traversal APIs on kprobe_tables if possible kprobes: Suppress the suspicious RCU warning on kprobes recordmcount: support >64k sections
2020-06-20Merge tag 'libnvdimm-for-5.8-rc2' of ↵Linus Torvalds7-23/+618
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm updates from Dan Williams: "A feature (papr_scm health retrieval) and a fix (sysfs attribute visibility) for v5.8. Vaibhav explains in the merge commit below why missing v5.8 would be painful and I agreed to try a -rc2 pull because only cosmetics kept this out of -rc1 and his initial versions were posted in more than enough time for v5.8 consideration: 'These patches are tied to specific features that were committed to customers in upcoming distros releases (RHEL and SLES) whose time-lines are tied to 5.8 kernel release. Being able to track the health of an nvdimm is critical for our customers that are running workloads leveraging papr-scm nvdimms. Missing the 5.8 kernel would mean missing the distro timelines and shifting forward the availability of this feature in distro kernels by at least 6 months' Summary: - Fix the visibility of the region 'align' attribute. The new unit tests for region alignment handling caught a corner case where the alignment cannot be specified if the region is converted from static to dynamic provisioning at runtime. - Add support for device health retrieval for the persistent memory supported by the papr_scm driver. This includes both the standard sysfs "health flags" that the nfit persistent memory driver publishes and a mechanism for the ndctl tool to retrieve a health-command payload" * tag 'libnvdimm-for-5.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: nvdimm/region: always show the 'align' attribute powerpc/papr_scm: Implement support for PAPR_PDSM_HEALTH ndctl/papr_scm,uapi: Add support for PAPR nvdimm specific methods powerpc/papr_scm: Improve error logging and handling papr_scm_ndctl() powerpc/papr_scm: Fetch nvdimm health information from PHYP seq_buf: Export seq_buf_printf powerpc: Document details on H_SCM_HEALTH hcall
2020-06-20pinctrl: qcom: ipq6018 Add missing pins in qpic pin groupSivaprakash Murugesan1-1/+2
The patch adds missing qpic data pins to qpic pingroup. These pins are necessary for the qpic nand to work. Fixes: ef1ea54eab0e ("pinctrl: qcom: Add ipq6018 pinctrl driver") Signed-off-by: Sivaprakash Murugesan <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Linus Walleij <[email protected]>
2020-06-20Revert "pinctrl: freescale: imx: Use 'devm_of_iomap()' to avoid a resource ↵Haibo Chen1-4/+3
leak in case of error in 'imx_pinctrl_probe()'" This reverts commit ba403242615c2c99e27af7984b1650771a2cc2c9. After commit 26d8cde5260b ("pinctrl: freescale: imx: add shared input select reg support"). i.MX7D has two iomux controllers iomuxc and iomuxc-lpsr which share select_input register for daisy chain settings. If use 'devm_of_iomap()', when probe the iomuxc-lpsr, will call devm_request_mem_region() for the region <0x30330000-0x3033ffff> for the first time. Then, next time when probe the iomuxc, API devm_platform_ioremap_resource() will also use the API devm_request_mem_region() for the share region <0x30330000-0x3033ffff> again, then cause issue, log like below: [ 0.179561] imx7d-pinctrl 302c0000.iomuxc-lpsr: initialized IMX pinctrl driver [ 0.191742] imx7d-pinctrl 30330000.pinctrl: can't request region for resource [mem 0x30330000-0x3033ffff] [ 0.191842] imx7d-pinctrl: probe of 30330000.pinctrl failed with error -16 Fixes: ba403242615c ("pinctrl: freescale: imx: Use 'devm_of_iomap()' to avoid a resource leak in case of error in 'imx_pinctrl_probe()'") Signed-off-by: Haibo Chen <[email protected]> Reviewed-by: Dong Aisheng <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Linus Walleij <[email protected]>
2020-06-20Merge tag 's390-5.8-2' of ↵Linus Torvalds18-134/+154
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Vasily Gorbik: - a few ptrace fixes mostly for strace and seccomp_bpf kernel tests findings - cleanup unused pm callbacks in virtio ccw - replace kmalloc + memset with kzalloc in crypto - use $(LD) for vDSO linkage to make clang happy - fix vDSO clock_getres() to preserve the same behaviour as posix_get_hrtimer_res() - fix workqueue cpumask warning when NUMA=n and nr_node_ids=2 - reduce SLSB writes during input processing, improve warnings and cleanup qdio_data usage in qdio - a few fixes to use scnprintf() instead of snprintf() * tag 's390-5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390: fix syscall_get_error for compat processes s390/qdio: warn about unexpected SLSB states s390/qdio: clean up usage of qdio_data s390/numa: let NODES_SHIFT depend on NEED_MULTIPLE_NODES s390/vdso: fix vDSO clock_getres() s390/vdso: Use $(LD) instead of $(CC) to link vDSO s390/protvirt: use scnprintf() instead of snprintf() s390: use scnprintf() in sys_##_prefix##_##_name##_show s390/crypto: use scnprintf() instead of snprintf() s390/zcrypt: use kzalloc s390/virtio: remove unused pm callbacks s390/qdio: reduce SLSB writes during Input Queue processing selftests/seccomp: s390 shares the syscall and return value register s390/ptrace: fix setting syscall number s390/ptrace: pass invalid syscall numbers to tracing s390/ptrace: return -ENOSYS when invalid syscall is supplied s390/seccomp: pass syscall arguments via seccomp_data s390/qdio: fine-tune SLSB update
2020-06-20Merge tag 'riscv-for-linus-5.8-rc2' of ↵Linus Torvalds3-6/+22
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V fixes from Palmer Dabbelt: - a workaround for a compiler surprise related to the "r" inline assembly that allows LLVM to boot. - a fix to avoid WX-only mappings, which the ISA does not allow. While this probably manifests in many ways, the bug was found in stress-ng. - a missing lock in set_direct_map_*(), which due to a recent lockdep change started asserting. * tag 'riscv-for-linus-5.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: RISC-V: Acquire mmap lock before invoking walk_page_range RISC-V: Don't allow write+exec only page mapping request in mmap riscv/atomic: Fix sign extension for RV64I
2020-06-20Merge tag 'linux-kselftest-5.8-rc2' of ↵Linus Torvalds80-637/+123
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kselftest cleanups from Shuah Khan: - ftrace "requires:" list for simplifying and unifying requirement checks for each test case, adding "requires:" line instead of checking required ftrace interfaces in each test case. - a minor spelling correction patch * tag 'linux-kselftest-5.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests/ftrace: Support ":README" suffix for requires selftests/ftrace: Support ":tracer" suffix for requires selftests/ftrace: Convert check_filter_file() with requires list selftests/ftrace: Convert required interface checks into requires list selftests/ftrace: Add "requires:" list support selftests/ftrace: Return unsupported for the unconfigured features selftests/ftrace: Allow ":" in description tools: testing: ftrace: trigger: fix spelling mistake
2020-06-20afs: Fix hang on rmmod due to outstanding timerDavid Howells4-2/+16
The fileserver probe timer, net->fs_probe_timer, isn't cancelled when the kafs module is being removed and so the count it holds on net->servers_outstanding doesn't get dropped.. This causes rmmod to wait forever. The hung process shows a stack like: afs_purge_servers+0x1b5/0x23c [kafs] afs_net_exit+0x44/0x6e [kafs] ops_exit_list+0x72/0x93 unregister_pernet_operations+0x14c/0x1ba unregister_pernet_subsys+0x1d/0x2a afs_exit+0x29/0x6f [kafs] __do_sys_delete_module.isra.0+0x1a2/0x24b do_syscall_64+0x51/0x95 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fix this by: (1) Attempting to cancel the probe timer and, if successful, drop the count that the timer was holding. (2) Make the timer function just drop the count and not schedule the prober if the afs portion of net namespace is being destroyed. Also, whilst we're at it, make the following changes: (3) Initialise net->servers_outstanding to 1 and decrement it before waiting on it so that it doesn't generate wake up events by being decremented to 0 until we're cleaning up. (4) Switch the atomic_dec() on ->servers_outstanding for ->fs_timer in afs_purge_servers() to use the helper function for that. Fixes: f6cbb368bcb0 ("afs: Actively poll fileservers to maintain NAT or firewall openings") Signed-off-by: David Howells <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2020-06-20afs: Fix afs_do_lookup() to call correct fetch-status op variantDavid Howells1-1/+1
Fix afs_do_lookup()'s fallback case for when FS.InlineBulkStatus isn't supported by the server. In the fallback, it calls FS.FetchStatus for the specific vnode it's meant to be looking up. Commit b6489a49f7b7 broke this by renaming one of the two identically-named afs_fetch_status_operation descriptors to something else so that one of them could be made non-static. The site that used the renamed one, however, wasn't renamed and didn't produce any warning because the other was declared in a header. Fix this by making afs_do_lookup() use the renamed variant. Note that there are two variants of the success method because one is called from ->lookup() where we may or may not have an inode, but can't call iget until after we've talked to the server - whereas the other is called from within iget where we have an inode, but it may or may not be initialised. The latter variant expects there to be an inode, but because it's being called from there former case, there might not be - resulting in an oops like the following: BUG: kernel NULL pointer dereference, address: 00000000000000b0 ... RIP: 0010:afs_fetch_status_success+0x27/0x7e ... Call Trace: afs_wait_for_operation+0xda/0x234 afs_do_lookup+0x2fe/0x3c1 afs_lookup+0x3c5/0x4bd __lookup_slow+0xcd/0x10f walk_component+0xa2/0x10c path_lookupat.isra.0+0x80/0x110 filename_lookup+0x81/0x104 vfs_statx+0x76/0x109 __do_sys_newlstat+0x39/0x6b do_syscall_64+0x4c/0x78 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: b6489a49f7b7 ("afs: Fix silly rename") Signed-off-by: David Howells <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2020-06-20powerpc/8xx: Provide ptep_get() with 16k pagesChristophe Leroy1-0/+10
READ_ONCE() now enforces atomic read, which leads to: CC mm/gup.o In file included from ./include/linux/kernel.h:11:0, from mm/gup.c:2: In function 'gup_hugepte.constprop', inlined from 'gup_huge_pd.isra.79' at mm/gup.c:2465:8: ./include/linux/compiler.h:392:38: error: call to '__compiletime_assert_222' declared with attribute error: Unsupported access size for {READ,WRITE}_ONCE(). _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__) ^ ./include/linux/compiler.h:373:4: note: in definition of macro '__compiletime_assert' prefix ## suffix(); \ ^ ./include/linux/compiler.h:392:2: note: in expansion of macro '_compiletime_assert' _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__) ^ ./include/linux/compiler.h:405:2: note: in expansion of macro 'compiletime_assert' compiletime_assert(__native_word(t) || sizeof(t) == sizeof(long long), \ ^ ./include/linux/compiler.h:291:2: note: in expansion of macro 'compiletime_assert_rwonce_type' compiletime_assert_rwonce_type(x); \ ^ mm/gup.c:2428:8: note: in expansion of macro 'READ_ONCE' pte = READ_ONCE(*ptep); ^ In function 'gup_get_pte', inlined from 'gup_pte_range' at mm/gup.c:2228:9, inlined from 'gup_pmd_range' at mm/gup.c:2613:15, inlined from 'gup_pud_range' at mm/gup.c:2641:15, inlined from 'gup_p4d_range' at mm/gup.c:2666:15, inlined from 'gup_pgd_range' at mm/gup.c:2694:15, inlined from 'internal_get_user_pages_fast' at mm/gup.c:2795:3: ./include/linux/compiler.h:392:38: error: call to '__compiletime_assert_219' declared with attribute error: Unsupported access size for {READ,WRITE}_ONCE(). _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__) ^ ./include/linux/compiler.h:373:4: note: in definition of macro '__compiletime_assert' prefix ## suffix(); \ ^ ./include/linux/compiler.h:392:2: note: in expansion of macro '_compiletime_assert' _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__) ^ ./include/linux/compiler.h:405:2: note: in expansion of macro 'compiletime_assert' compiletime_assert(__native_word(t) || sizeof(t) == sizeof(long long), \ ^ ./include/linux/compiler.h:291:2: note: in expansion of macro 'compiletime_assert_rwonce_type' compiletime_assert_rwonce_type(x); \ ^ mm/gup.c:2199:9: note: in expansion of macro 'READ_ONCE' return READ_ONCE(*ptep); ^ make[2]: *** [mm/gup.o] Error 1 Define ptep_get() on 8xx when using 16k pages. Fixes: 9e343b467c70 ("READ_ONCE: Enforce atomicity for {READ,WRITE}_ONCE() memory accesses") Signed-off-by: Christophe Leroy <[email protected]> Acked-by: Will Deacon <[email protected]> Acked-by: Peter Zijlstra (Intel) <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/341688399c1b102756046d19ea6ce39db1ae4742.1592225558.git.christophe.leroy@csgroup.eu
2020-06-20mm: Allow arches to provide ptep_get()Christophe Leroy3-2/+9
Since commit 9e343b467c70 ("READ_ONCE: Enforce atomicity for {READ,WRITE}_ONCE() memory accesses") it is not possible anymore to use READ_ONCE() to access complex page table entries like the one defined for powerpc 8xx with 16k size pages. Define a ptep_get() helper that architectures can override instead of performing a READ_ONCE() on the page table entry pointer. Fixes: 9e343b467c70 ("READ_ONCE: Enforce atomicity for {READ,WRITE}_ONCE() memory accesses") Signed-off-by: Christophe Leroy <[email protected]> Acked-by: Will Deacon <[email protected]> Acked-by: Peter Zijlstra (Intel) <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/087fa12b6e920e32315136b998aa834f99242695.1592225558.git.christophe.leroy@csgroup.eu
2020-06-20mm/gup: Use huge_ptep_get() in gup_hugepte()Christophe Leroy1-1/+1
gup_hugepte() reads hugepage table entries, it can't read them directly, huge_ptep_get() must be used. Fixes: 9e343b467c70 ("READ_ONCE: Enforce atomicity for {READ,WRITE}_ONCE() memory accesses") Signed-off-by: Christophe Leroy <[email protected]> Acked-by: Will Deacon <[email protected]> Acked-by: Peter Zijlstra (Intel) <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/ffc3714334c3bfaca6f13788ad039e8759ae413f.1592225558.git.christophe.leroy@csgroup.eu
2020-06-19selftests/net: report etf errors correctlyWillem de Bruijn1-7/+26
The ETF qdisc can queue skbs that it could not pace on the errqueue. Address a few issues in the selftest - recv buffer size was too small, and incorrectly calculated - compared errno to ee_code instead of ee_errno - missed invalid request error type v2: - fix a few checkpatch --strict indentation warnings Fixes: ea6a547669b3 ("selftests/net: make so_txtime more robust to timer variance") Signed-off-by: Willem de Bruijn <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-06-19ibmveth: Fix max MTU limitThomas Falcon1-1/+1
The max MTU limit defined for ibmveth is not accounting for virtual ethernet buffer overhead, which is twenty-two additional bytes set aside for the ethernet header and eight additional bytes of an opaque handle reserved for use by the hypervisor. Update the max MTU to reflect this overhead. Fixes: d894be57ca92 ("ethernet: use net core MTU range checking in more drivers") Fixes: 110447f8269a ("ethernet: fix min/max MTU typos") Signed-off-by: Thomas Falcon <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-06-19Merge branch 'several-fixes-for-indirect-flow_blocks-offload'David S. Miller10-63/+110
wenxu says: ==================== several fixes for indirect flow_blocks offload v2: patch2: store the cb_priv of representor to the flow_block_cb->indr.cb_priv in the driver. And make the correct check with the statments this->indr.cb_priv == cb_priv patch4: del the driver list only in the indriect cleanup callbacks v3: add the cover letter and changlogs. v4: collapsed 1/4, 2/4, 4/4 in v3 to one fix Add the prepare patch 1 and 2 v5: patch1: place flow_indr_block_cb_alloc() right before flow_indr_dev_setup_offload() to avoid moving flow_block_indr_init() This series fixes commit 1fac52da5942 ("net: flow_offload: consolidate indirect flow_block infrastructure") that revists the flow_block infrastructure. patch #1 #2: prepare for fix patch #3 add and use flow_indr_block_cb_alloc/remove function patch #3: fix flow_indr_dev_unregister path If the representor is removed, then identify the indirect flow_blocks that need to be removed by the release callback and the port representor structure. To identify the port representor structure, a new indr.cb_priv field needs to be introduced. The flow_block also needs to be removed from the driver list from the cleanup path patch#4 fix block->nooffloaddevcnt warning dmesg log. When a indr device add in offload success. The block->nooffloaddevcnt should be 0. After the representor go away. When the dir device go away the flow_block UNBIND operation with -EOPNOTSUPP which lead the warning demesg log. The block->nooffloaddevcnt should always count for indr block. even the indr block offload successful. The representor maybe gone away and the ingress qdisc can work in software mode. ==================== Reviewed-by: Simon Horman <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-06-19net/sched: cls_api: fix nooffloaddevcnt warning dmesg logwenxu1-10/+14
The block->nooffloaddevcnt should always count for indr block. even the indr block offload successful. The representor maybe gone away and the ingress qdisc can work in software mode. block->nooffloaddevcnt warning with following dmesg log: [ 760.667058] ##################################################### [ 760.668186] ## TEST test-ecmp-add-vxlan-encap-disable-sriov.sh ## [ 760.669179] ##################################################### [ 761.780655] :test: Fedora 30 (Thirty) [ 761.783794] :test: Linux reg-r-vrt-018-180 5.7.0+ [ 761.822890] :test: NIC ens1f0 FW 16.26.6000 PCI 0000:81:00.0 DEVICE 0x1019 ConnectX-5 Ex [ 761.860244] mlx5_core 0000:81:00.0 ens1f0: Link up [ 761.880693] IPv6: ADDRCONF(NETDEV_CHANGE): ens1f0: link becomes ready [ 762.059732] mlx5_core 0000:81:00.1 ens1f1: Link up [ 762.234341] :test: unbind vfs of ens1f0 [ 762.257825] :test: Change ens1f0 eswitch (0000:81:00.0) mode to switchdev [ 762.291363] :test: unbind vfs of ens1f1 [ 762.306914] :test: Change ens1f1 eswitch (0000:81:00.1) mode to switchdev [ 762.309237] mlx5_core 0000:81:00.1: E-Switch: Disable: mode(LEGACY), nvfs(2), active vports(3) [ 763.282598] mlx5_core 0000:81:00.1: E-Switch: Supported tc offload range - chains: 4294967294, prios: 4294967295 [ 763.362825] mlx5_core 0000:81:00.1: MLX5E: StrdRq(1) RqSz(8) StrdSz(2048) RxCqeCmprss(0) [ 763.444465] mlx5_core 0000:81:00.1 ens1f1: renamed from eth0 [ 763.460088] mlx5_core 0000:81:00.1: MLX5E: StrdRq(1) RqSz(8) StrdSz(2048) RxCqeCmprss(0) [ 763.502586] mlx5_core 0000:81:00.1: MLX5E: StrdRq(1) RqSz(8) StrdSz(2048) RxCqeCmprss(0) [ 763.552429] ens1f1_0: renamed from eth0 [ 763.569569] mlx5_core 0000:81:00.1: E-Switch: Enable: mode(OFFLOADS), nvfs(2), active vports(3) [ 763.629694] ens1f1_1: renamed from eth1 [ 764.631552] IPv6: ADDRCONF(NETDEV_CHANGE): ens1f1_0: link becomes ready [ 764.670841] :test: unbind vfs of ens1f0 [ 764.681966] :test: unbind vfs of ens1f1 [ 764.726762] mlx5_core 0000:81:00.0 ens1f0: Link up [ 764.766511] mlx5_core 0000:81:00.1 ens1f1: Link up [ 764.797325] :test: Add multipath vxlan encap rule and disable sriov [ 764.798544] :test: config multipath route [ 764.812732] mlx5_core 0000:81:00.0: lag map port 1:2 port 2:2 [ 764.874556] mlx5_core 0000:81:00.0: modify lag map port 1:1 port 2:2 [ 765.603681] :test: OK [ 765.659048] IPv6: ADDRCONF(NETDEV_CHANGE): ens1f1_1: link becomes ready [ 765.675085] :test: verify rule in hw [ 765.694237] IPv6: ADDRCONF(NETDEV_CHANGE): ens1f0: link becomes ready [ 765.711892] IPv6: ADDRCONF(NETDEV_CHANGE): ens1f1: link becomes ready [ 766.979230] :test: OK [ 768.125419] :test: OK [ 768.127519] :test: - disable sriov ens1f1 [ 768.131160] pci 0000:81:02.2: Removing from iommu group 75 [ 768.132646] pci 0000:81:02.3: Removing from iommu group 76 [ 769.179749] mlx5_core 0000:81:00.1: E-Switch: Disable: mode(OFFLOADS), nvfs(2), active vports(3) [ 769.455627] mlx5_core 0000:81:00.0: modify lag map port 1:1 port 2:1 [ 769.703990] mlx5_core 0000:81:00.1: MLX5E: StrdRq(1) RqSz(8) StrdSz(2048) RxCqeCmprss(0) [ 769.988637] mlx5_core 0000:81:00.1 ens1f1: renamed from eth0 [ 769.990022] :test: - disable sriov ens1f0 [ 769.994922] pci 0000:81:00.2: Removing from iommu group 73 [ 769.997048] pci 0000:81:00.3: Removing from iommu group 74 [ 771.035813] mlx5_core 0000:81:00.0: E-Switch: Disable: mode(OFFLOADS), nvfs(2), active vports(3) [ 771.339091] ------------[ cut here ]------------ [ 771.340812] WARNING: CPU: 6 PID: 3448 at net/sched/cls_api.c:749 tcf_block_offload_unbind.isra.0+0x5c/0x60 [ 771.341728] Modules linked in: act_mirred act_tunnel_key cls_flower dummy vxlan ip6_udp_tunnel udp_tunnel sch_ingress nfsv3 nfs_acl nfs lockd grace fscache tun bridge stp llc sunrpc rdma_ucm rdma_cm iw_cm ib_cm mlx5_ib ib_uverbs ib_core mlx5_core intel_rapl_msr intel_rapl_common sb_edac x86_pkg_temp_thermal intel_powerclamp coretemp mlxfw act_ct nf_flow_table kvm_intel nf_nat kvm nf_conntrack irqbypass crct10dif_pclmul igb crc32_pclmul nf_defrag_ipv6 libcrc32c nf_defrag_ipv4 crc32c_intel ghash_clmulni_intel ptp ipmi_ssif intel_cstate pps_c ore ses intel_uncore mei_me iTCO_wdt joydev ipmi_si iTCO_vendor_support i2c_i801 enclosure mei ioatdma dca lpc_ich wmi ipmi_devintf pcspkr acpi_power_meter ipmi_msghandler acpi_pad ast i2c_algo_bit drm_vram_helper drm_kms_helper drm_ttm_helper ttm drm mpt3sas raid_class scsi_transport_sas [ 771.347818] CPU: 6 PID: 3448 Comm: test-ecmp-add-v Not tainted 5.7.0+ #1146 [ 771.348727] Hardware name: Supermicro SYS-2028TP-DECR/X10DRT-P, BIOS 2.0b 03/30/2017 [ 771.349646] RIP: 0010:tcf_block_offload_unbind.isra.0+0x5c/0x60 [ 771.350553] Code: 4a fd ff ff 83 f8 a1 74 0e 5b 4c 89 e7 5d 41 5c 41 5d e9 07 93 89 ff 8b 83 a0 00 00 00 8d 50 ff 89 93 a0 00 00 00 85 c0 75 df <0f> 0b eb db 0f 1f 44 00 00 41 57 41 56 41 55 41 89 cd 41 54 49 89 [ 771.352420] RSP: 0018:ffffb33144cd3b00 EFLAGS: 00010246 [ 771.353353] RAX: 0000000000000000 RBX: ffff8b37cf4b2800 RCX: 0000000000000000 [ 771.354294] RDX: 00000000ffffffff RSI: ffff8b3b9aad0000 RDI: ffffffff8d5c6e20 [ 771.355245] RBP: ffff8b37eb546948 R08: ffffffffc0b7a348 R09: ffff8b3b9aad0000 [ 771.356189] R10: 0000000000000001 R11: ffff8b3ba7a0a1c0 R12: ffff8b37cf4b2850 [ 771.357123] R13: ffff8b3b9aad0000 R14: ffff8b37cf4b2820 R15: ffff8b37cf4b2820 [ 771.358039] FS: 00007f8a19b6e740(0000) GS:ffff8b3befa00000(0000) knlGS:0000000000000000 [ 771.358965] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 771.359885] CR2: 00007f3afb91c1a0 CR3: 000000045133c004 CR4: 00000000001606e0 [ 771.360825] Call Trace: [ 771.361764] __tcf_block_put+0x84/0x150 [ 771.362712] ingress_destroy+0x1b/0x20 [sch_ingress] [ 771.363658] qdisc_destroy+0x3e/0xc0 [ 771.364594] dev_shutdown+0x7a/0xa5 [ 771.365522] rollback_registered_many+0x20d/0x530 [ 771.366458] ? netdev_upper_dev_unlink+0x15d/0x1c0 [ 771.367387] unregister_netdevice_many.part.0+0xf/0x70 [ 771.368310] vxlan_netdevice_event+0xa4/0x110 [vxlan] [ 771.369454] notifier_call_chain+0x4c/0x70 [ 771.370579] rollback_registered_many+0x2f5/0x530 [ 771.371719] rollback_registered+0x56/0x90 [ 771.372843] unregister_netdevice_queue+0x73/0xb0 [ 771.373982] unregister_netdev+0x18/0x20 [ 771.375168] mlx5e_vport_rep_unload+0x56/0xc0 [mlx5_core] [ 771.376327] esw_offloads_disable+0x81/0x90 [mlx5_core] [ 771.377512] mlx5_eswitch_disable_locked.cold+0xcb/0x1af [mlx5_core] [ 771.378679] mlx5_eswitch_disable+0x44/0x60 [mlx5_core] [ 771.379822] mlx5_device_disable_sriov+0xad/0xb0 [mlx5_core] [ 771.380968] mlx5_core_sriov_configure+0xc1/0xe0 [mlx5_core] [ 771.382087] sriov_numvfs_store+0xfc/0x130 [ 771.383195] kernfs_fop_write+0xce/0x1b0 [ 771.384302] vfs_write+0xb6/0x1a0 [ 771.385410] ksys_write+0x5f/0xe0 [ 771.386500] do_syscall_64+0x5b/0x1d0 [ 771.387569] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 0fdcf78d5973 ("net: use flow_indr_dev_setup_offload()") Signed-off-by: wenxu <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-06-19net: flow_offload: fix flow_indr_dev_unregister pathwenxu10-18/+27
If the representor is removed, then identify the indirect flow_blocks that need to be removed by the release callback and the port representor structure. To identify the port representor structure, a new indr.cb_priv field needs to be introduced. The flow_block also needs to be removed from the driver list from the cleanup path. Fixes: 1fac52da5942 ("net: flow_offload: consolidate indirect flow_block infrastructure") Signed-off-by: wenxu <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-06-19flow_offload: use flow_indr_block_cb_alloc/remove functionwenxu6-44/+44
Prepare fix the bug in the next patch. use flow_indr_block_cb_alloc/remove function and remove the __flow_block_indr_binding. Signed-off-by: wenxu <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-06-19flow_offload: add flow_indr_block_cb_alloc/remove functionwenxu2-0/+34
Add flow_indr_block_cb_alloc/remove function for next fix patch. Signed-off-by: wenxu <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-06-19geneve: allow changing DF behavior after creationSabrina Dubroca1-0/+1
Currently, trying to change the DF parameter of a geneve device does nothing: # ip -d link show geneve1 14: geneve1: <snip> link/ether <snip> geneve id 1 remote 10.0.0.1 ttl auto df set dstport 6081 <snip> # ip link set geneve1 type geneve id 1 df unset # ip -d link show geneve1 14: geneve1: <snip> link/ether <snip> geneve id 1 remote 10.0.0.1 ttl auto df set dstport 6081 <snip> We just need to update the value in geneve_changelink. Fixes: a025fb5f49ad ("geneve: Allow configuration of DF behaviour") Signed-off-by: Sabrina Dubroca <[email protected]> Reviewed-by: Stefano Brivio <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-06-19enetc: Fix HW_VLAN_CTAG_TX|RX togglingClaudiu Manoil3-16/+34
VLAN tag insertion/extraction offload is correctly activated at probe time but deactivation of this feature (i.e. via ethtool) is broken. Toggling works only for Tx/Rx ring 0 of a PF, and is ignored for the other rings, including the VF rings. To fix this, the existing VLAN offload toggling code was extended to all the rings assigned to a netdevice, instead of the default ring 0 (likely a leftover from the early validation days of this feature). And the code was moved to the common set_features() function to fix toggling for the VF driver too. Fixes: d4fd0404c1c9 ("enetc: Introduce basic PF and VF ENETC ethernet drivers") Signed-off-by: Claudiu Manoil <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-06-19net: macb: undo operations in case of failureClaudiu Beznea1-2/+4
Undo previously done operation in case macb_phylink_connect() fails. Since macb_reset_hw() is the 1st undo operation the napi_exit label was renamed to reset_hw. Fixes: 7897b071ac3b ("net: macb: convert to phylink") Signed-off-by: Claudiu Beznea <[email protected]> Acked-by: Nicolas Ferre <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-06-19Merge tag 'rxrpc-fixes-20200618' of ↵David S. Miller3-6/+5
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs David Howells says: ==================== rxrpc: Performance drop fix and other fixes Here are three fixes for rxrpc: (1) Fix a trace symbol mapping. It doesn't seem to let you map to "". (2) Fix the handling of the remote receive window size when it increases beyond the size we can support for our transmit window. (3) Fix a performance drop caused by retransmitted packets being accidentally marked as already ACK'd. ==================== Signed-off-by: David S. Miller <[email protected]>
2020-06-19Merge branch 'for-5.8/papr_scm' into libnvdimm-for-nextDan Williams6-11/+616
Include the papr_scm health retrieval feature for v5.8-rc2. The functionality was initially posted well in advance of the merge window, but review comments and a late build-bot warning kept them out of the v5.8-rc1 libnvdimm pull request. Vaibhav notes: These patches are tied to specific features that were committed to customers in upcoming distros releases (RHEL and SLES) whose time-lines are tied to 5.8 kernel release. Being able to track the health of an nvdimm is critical for our customers that are running workloads leveraging papr-scm nvdimms. Missing the 5.8 kernel would mean missing the distro timelines and shifting forward the availability of this feature in distro kernels by at least 6 months.
2020-06-19Merge branch 'net-phy-MDIO-bus-scanning-fixes'David S. Miller2-4/+11
Florian Fainelli says: ==================== net: phy: MDIO bus scanning fixes This patch series fixes two problems with the current MDIO bus scanning logic which was identified while moving from 4.9 to 5.4 on devices that do rely on scanning the MDIO bus at runtime because they use pluggable cards. Changes in v2: - added comment explaining the special value of -ENODEV - added Andrew's Reviewed-by tag ==================== Signed-off-by: David S. Miller <[email protected]>
2020-06-19net: phy: Check harder for errors in get_phy_id()Florian Fainelli1-2/+4
Commit 02a6efcab675 ("net: phy: allow scanning busses with missing phys") added a special condition to return -ENODEV in case -ENODEV or -EIO was returned from the first read of the MII_PHYSID1 register. In case the MDIO bus data line pull-up is not strong enough, the MDIO bus controller will not flag this as a read error. This can happen when a pluggable daughter card is not connected and weak internal pull-ups are used (since that is the only option, otherwise the pins are floating). The second read of MII_PHYSID2 will be correctly flagged an error though, but now we will return -EIO which will be treated as a hard error, thus preventing MDIO bus scanning loops to continue succesfully. Apply the same logic to both register reads, thus allowing the scanning logic to proceed. Fixes: 02a6efcab675 ("net: phy: allow scanning busses with missing phys") Reviewed-by: Andrew Lunn <[email protected]> Signed-off-by: Florian Fainelli <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-06-19of: of_mdio: Correct loop scanning logicFlorian Fainelli1-2/+7
Commit 209c65b61d94 ("drivers/of/of_mdio.c:fix of_mdiobus_register()") introduced a break of the loop on the premise that a successful registration should exit the loop. The premise is correct but not to code, because rc && rc != -ENODEV is just a special error condition, that means we would exit the loop even with rc == -ENODEV which is absolutely not correct since this is the error code to indicate to the MDIO bus layer that scanning should continue. Fix this by explicitly checking for rc = 0 as the only valid condition to break out of the loop. Fixes: 209c65b61d94 ("drivers/of/of_mdio.c:fix of_mdiobus_register()") Reviewed-by: Andrew Lunn <[email protected]> Signed-off-by: Florian Fainelli <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-06-19Merge tag 'io_uring-5.8-2020-06-19' of git://git.kernel.dk/linux-blockLinus Torvalds3-112/+177
Pull io_uring fixes from Jens Axboe: - Catch a case where io_sq_thread() didn't do proper mm acquire - Ensure poll completions are reaped on shutdown - Async cancelation and run fixes (Pavel) - io-poll race fixes (Xiaoguang) - Request cleanup race fix (Xiaoguang) * tag 'io_uring-5.8-2020-06-19' of git://git.kernel.dk/linux-block: io_uring: fix possible race condition against REQ_F_NEED_CLEANUP io_uring: reap poll completions while waiting for refs to drop on exit io_uring: acquire 'mm' for task_work for SQPOLL io_uring: add memory barrier to synchronize io_kiocb's result and iopoll_completed io_uring: don't fail links for EAGAIN error in IOPOLL mode io_uring: cancel by ->task not pid io_uring: lazy get task io_uring: batch cancel in io_uring_cancel_files() io_uring: cancel all task's requests on exit io-wq: add an option to cancel all matched reqs io-wq: reorder cancellation pending -> running io_uring: fix lazy work init
2020-06-19Merge tag 'block-5.8-2020-06-19' of git://git.kernel.dk/linux-blockLinus Torvalds10-39/+70
Pull block fixes from Jens Axboe: - Use import_uuid() where appropriate (Andy) - bcache fixes (Coly, Mauricio, Zhiqiang) - blktrace sparse warnings fix (Jan) - blktrace concurrent setup fix (Luis) - blkdev_get use-after-free fix (Jason) - Ensure all blk-mq maps are updated (Weiping) - Loop invalidate bdev fix (Zheng) * tag 'block-5.8-2020-06-19' of git://git.kernel.dk/linux-block: block: make function 'kill_bdev' static loop: replace kill_bdev with invalidate_bdev partitions/ldm: Replace uuid_copy() with import_uuid() where it makes sense block: update hctx map when use multiple maps blktrace: Avoid sparse warnings when assigning q->blk_trace blktrace: break out of blktrace setup on concurrent calls block: Fix use-after-free in blkdev_get() trace/events/block.h: drop kernel-doc for dropped function parameter blk-mq: Remove redundant 'return' statement bcache: pr_info() format clean up in bcache_device_init() bcache: use delayed kworker fo asynchronous devices registration bcache: check and adjust logical block size for backing devices bcache: fix potential deadlock problem in btree_gc_coalesce
2020-06-19Merge tag 'libata-5.8-2020-06-19' of git://git.kernel.dk/linux-blockLinus Torvalds4-13/+21
Pull libata fixes from Jens Axboe: "A few minor changes that should go into this release" * tag 'libata-5.8-2020-06-19' of git://git.kernel.dk/linux-block: libata: Use per port sync for detach ata/libata: Fix usage of page address by page_address in ata_scsi_mode_select_xlat function sata_rcar: handle pm_runtime_get_sync failure cases
2020-06-19net: ethernet: oki-semi: pch_gbe: fix spelling mistakeFlavio Suligoi1-1/+1
Fix typo: "Triger" --> "Trigger" Signed-off-by: Flavio Suligoi <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-06-19MAINTAINERS: update ieee802154 project website URLStefan Schmidt1-1/+1
Update URL to our new home. Signed-off-by: Stefan Schmidt <[email protected]>
2020-06-19docs: net: ieee802154: change link to new project URLStefan Schmidt1-2/+2
We finally came around to setup a new project website. Update the reference here. Signed-off-by: Stefan Schmidt <[email protected]>
2020-06-19net: ethernet: neterion: vxge: fix spelling mistakeFlavio Suligoi1-1/+1
Fix typo: "trigered" --> "triggered" Signed-off-by: Flavio Suligoi <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-06-19Merge branch 'master' of ↵David S. Miller6-37/+64
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec Steffen Klassert says: ==================== pull request (net): ipsec 2020-06-19 1) Fix double ESP trailer insertion in IPsec crypto offload if netif_xmit_frozen_or_stopped is true. From Huy Nguyen. 2) Merge fixup for "remove output_finish indirection from xfrm_state_afinfo". From Stephen Rothwell. 3) Select CRYPTO_SEQIV for ESP as this is needed for GCM and several other encryption algorithms. Also modernize the crypto algorithm selections for ESP and AH, remove those that are maked as "MUST NOT" and add those that are marked as "MUST" be implemented in RFC 8221. From Eric Biggers. Please note the merge conflict between commit: a7f7f6248d97 ("treewide: replace '---help---' in Kconfig files with 'help'") from Linus' tree and commits: 7d4e39195925 ("esp, ah: consolidate the crypto algorithm selections") be01369859b8 ("esp, ah: modernize the crypto algorithm selections") from the ipsec tree. ==================== Signed-off-by: David S. Miller <[email protected]>
2020-06-19Merge branch '40GbE' of ↵David S. Miller6-24/+44
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-queue Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2020-06-18 This series contains fixes to ixgbe, i40e and ice driver. Ciara fixes up the ixgbe, i40e and ice drivers to protect access when allocating and freeing the rings. In addition, made use of READ_ONCE when reading the rings prior to accessing the statistics pointer. Björn fixes a crash where the receive descriptor ring allocation was moved to a different function, which broke the ethtool set_ringparam() hook. ==================== Signed-off-by: David S. Miller <[email protected]>
2020-06-19Merge tag 'drm-fixes-2020-06-19' of git://anongit.freedesktop.org/drm/drmLinus Torvalds29-432/+834
Pull drm fixes from Dave Airlie: "Just i915 and amd here. i915 has some workaround movement so they get applied at the right times, and a timeslicing fix, along with some display fixes. AMD has a few display floating point fix and a devcgroup fix for amdkfd. i915: - Fix for timeslicing and virtual engines/unpremptable requests (+ 1 dependency patch) - Fixes into TypeC register programming and interrupt storm detecting - Disable DIP on MST ports with the transcoder clock still on - Avoid missing GT workarounds at reset for HSW and older gens - Fix for unwinding multiple requests missing force restore - Fix encoder type check for DDI vswing sequence - Build warning fixes amdgpu: - Fix kvfree/kfree mixup - Fix hawaii device id in powertune configuration - Display FP fixes - Documentation fixes amdkfd: - devcgroup check fix" * tag 'drm-fixes-2020-06-19' of git://anongit.freedesktop.org/drm/drm: (23 commits) drm/amdgpu: fix documentation around busy_percentage drm/amdgpu/pm: update comment to clarify Overdrive interfaces drm/amdkfd: Use correct major in devcgroup check drm/i915/display: Fix the encoder type check drm/i915/icl+: Fix hotplug interrupt disabling after storm detection drm/i915/gt: Move gen4 GT workarounds from init_clock_gating to workarounds drm/i915/gt: Move ilk GT workarounds from init_clock_gating to workarounds drm/i915/gt: Move snb GT workarounds from init_clock_gating to workarounds drm/i915/gt: Move vlv GT workarounds from init_clock_gating to workarounds drm/i915/gt: Move ivb GT workarounds from init_clock_gating to workarounds drm/i915/gt: Move hsw GT workarounds from init_clock_gating to workarounds drm/i915/icl: Disable DIP on MST ports with the transcoder clock still on drm/i915/gt: Incrementally check for rewinding drm/i915/tc: fix the reset of ln0 drm/i915/gt: Prevent timeslicing into unpreemptable requests drm/i915/selftests: Restore to default heartbeat drm/i915: work around false-positive maybe-uninitialized warning drm/i915/pmu: avoid an maybe-uninitialized warning drm/i915/gt: Incorporate the virtual engine into timeslicing drm/amd/display: Rework dsc to isolate FPU operations ...
2020-06-19Merge tag 'ceph-for-5.8-rc2' of git://github.com/ceph/ceph-clientLinus Torvalds4-16/+15
Pull ceph fixes from Ilya Dryomov: "An important follow-up for replica reads support that went into -rc1 and two target_copy() fixups" * tag 'ceph-for-5.8-rc2' of git://github.com/ceph/ceph-client: libceph: don't omit used_replica in target_copy() libceph: don't omit recovery_deletes in target_copy() libceph: move away from global osd_req_flags
2020-06-19Merge tag 'arm64-fixes' of ↵Linus Torvalds11-60/+66
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Will Deacon: "Unfortunately, we still have a number of outstanding issues so there will be more fixes to come, but this lot are a good start. - Fix handling of watchpoints triggered by uaccess routines - Fix initialisation of gigantic pages for CMA buffers - Raise minimum clang version for BTI to avoid miscompilation - Fix data race in SVE vector length configuration code - Ensure address tags are ignored in kern_addr_valid() - Dump register state on fatal BTI exception - kexec_file() cleanup to use struct_size() macro" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: hw_breakpoint: Don't invoke overflow handler on uaccess watchpoints arm64: kexec_file: Use struct_size() in kmalloc() arm64: mm: reserve hugetlb CMA after numa_init arm64: bti: Require clang >= 10.0.1 for in-kernel BTI support arm64: sve: Fix build failure when ARM64_SVE=y and SYSCTL=n arm64: pgtable: Clear the GP bit for non-executable kernel pages arm64: mm: reset address tag set by kasan sw tagging arm64: traps: Dump registers prior to panic() in bad_mode() arm64/sve: Eliminate data races on sve_default_vl docs/arm64: Fix typo'd #define in sve.rst arm64: remove TEXT_OFFSET randomization
2020-06-19Merge tag 'overflow-v5.8-rc2' of ↵Linus Torvalds1-4/+21
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull flex-array size helper from Kees Cook: "During the treewide clean-ups of zero-length "flexible arrays", the struct_size() helper was heavily used, but it was noticed that many times it would have been nice to have an additional helper to get the size of just the flexible array itself. This need appears to be even more common when cleaning up the 1-byte array "flexible arrays", so Gustavo implemented it. I'd love to get this landed early so it can be used during the v5.9 dev cycle to ease the 1-byte array cleanups." * tag 'overflow-v5.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: overflow.h: Add flex_array_size() helper
2020-06-19Merge tag 'perf-tools-fixes-2020-06-02' of ↵Linus Torvalds25-77/+250
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tooling fixes from Arnaldo Carvalho de Melo: - Update various UAPI headers, some automatically adding support for a new MSR and the faccess2 syscall. - Fix corner case NULL deref in the histograms code. - Fix corner case NULL deref in 'perf stat' aggregation code. - Fix array pointer deref and old style declaration in the parsing of events. - Fix segfault when processing ZSTD compressed perf.data files in 'perf script' due to lack of initialization of the ZSTD library. - Handle __attribute__((user)) in libtraceevent fixing the parsing of syscall tracepoints with user buffers. - Make libtraevent aware of __builtin_expect() appearing in tracepoint fields. - Make the BPF prologue generation use bpf_probe_read_{user,kernel}(). - Fix the '@user' attribute parsing in kprobes variables in 'perf probe'. - Fix error message when asking for -fsanitize=address without required libraries. * tag 'perf-tools-fixes-2020-06-02' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (22 commits) perf build: Fix error message when asking for -fsanitize=address without required libraries tools lib traceevent: Add handler for __builtin_expect() tools lib traceevent: Handle __attribute__((user)) in field names tools lib traceevent: Add append() function helper for appending strings tools headers UAPI: Sync linux/fs.h with the kernel sources tools include UAPI: Sync linux/vhost.h with the kernel sources tools arch x86: Sync the msr-index.h copy with the kernel sources perf script: Initialize zstd_data perf pmu: Remove unused declaration perf parse-events: Fix an old style declaration perf parse-events: Fix an incompatible pointer perf bpf: Fix bpf prologue generation perf probe: Fix user attribute access in kprobes perf stat: Fix NULL pointer dereference perf report: Fix NULL pointer dereference in hists__fprintf_nr_sample_events() tools headers UAPI: Sync kvm.h headers with the kernel sources tools headers UAPI: Sync drm/i915_drm.h with the kernel sources tools headers UAPI: Sync linux/fscrypt.h with the kernel sources perf beauty: Add support to STATX_MNT_ID in the 'statx' syscall 'mask' argument tools headers uapi: Sync linux/stat.h with the kernel sources ...
2020-06-19dm writecache: add cond_resched to loop in persistent_memory_claim()Mikulas Patocka1-0/+2
Add cond_resched() to a loop that fills in the mapper memory area because the loop can be executed many times. Fixes: 48debafe4f2fe ("dm: add writecache target") Cc: [email protected] Signed-off-by: Mikulas Patocka <[email protected]> Signed-off-by: Mike Snitzer <[email protected]>
2020-06-19x86/asm/64: Align start of __clear_user() loop to 16-bytesMatt Fleming1-0/+1
x86 CPUs can suffer severe performance drops if a tight loop, such as the ones in __clear_user(), straddles a 16-byte instruction fetch window, or worse, a 64-byte cacheline. This issues was discovered in the SUSE kernel with the following commit, 1153933703d9 ("x86/asm/64: Micro-optimize __clear_user() - Use immediate constants") which increased the code object size from 10 bytes to 15 bytes and caused the 8-byte copy loop in __clear_user() to be split across a 64-byte cacheline. Aligning the start of the loop to 16-bytes makes this fit neatly inside a single instruction fetch window again and restores the performance of __clear_user() which is used heavily when reading from /dev/zero. Here are some numbers from running libmicro's read_z* and pread_z* microbenchmarks which read from /dev/zero: Zen 1 (Naples) libmicro-file 5.7.0-rc6 5.7.0-rc6 5.7.0-rc6 revert-1153933703d9+ align16+ Time mean95-pread_z100k 9.9195 ( 0.00%) 5.9856 ( 39.66%) 5.9938 ( 39.58%) Time mean95-pread_z10k 1.1378 ( 0.00%) 0.7450 ( 34.52%) 0.7467 ( 34.38%) Time mean95-pread_z1k 0.2623 ( 0.00%) 0.2251 ( 14.18%) 0.2252 ( 14.15%) Time mean95-pread_zw100k 9.9974 ( 0.00%) 6.0648 ( 39.34%) 6.0756 ( 39.23%) Time mean95-read_z100k 9.8940 ( 0.00%) 5.9885 ( 39.47%) 5.9994 ( 39.36%) Time mean95-read_z10k 1.1394 ( 0.00%) 0.7483 ( 34.33%) 0.7482 ( 34.33%) Note that this doesn't affect Haswell or Broadwell microarchitectures which seem to avoid the alignment issue by executing the loop straight out of the Loop Stream Detector (verified using perf events). Fixes: 1153933703d9 ("x86/asm/64: Micro-optimize __clear_user() - Use immediate constants") Signed-off-by: Matt Fleming <[email protected]> Signed-off-by: Borislav Petkov <[email protected]> Cc: <[email protected]> # v4.19+ Link: https://lkml.kernel.org/r/[email protected]
Powered by cgit, Gruvboxed by Blaster4385.