| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Even if dev->driver is null because we are being removed,
it is safer to not leave device locked.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Alexey Khoroshilov <[email protected]>
Reviewed-by: Ross Zwisler <[email protected]>
Reviewed-by: Vishal Verma <[email protected]>
Signed-off-by: Dan Williams <[email protected]>
|
|
The Atmel maxtouch DT binding documents that the compatible string for
the device is "atmel,maxtouch" and the I2C core always reports a module
alias of the form i2c:alias where alias is the compatible string model:
$ grep MODALIAS /sys/devices/platform/12e00000.i2c/i2c-8/8-004b/uevent
MODALIAS=i2c:maxtouch
But there isn't maxtouch entry in the I2C device ID table so when the
i2c:maxtouch MODALIAS uevent is reported, kmod is not able to match the
alias with a module to load:
$ modinfo atmel_mxt_ts | grep alias
alias: of:N*T*Catmel,maxtouch
alias: i2c:mXT224
alias: i2c:atmel_mxt_tp
alias: i2c:atmel_mxt_ts
alias: i2c:qt602240_ts
So add the maxtouch entry to the I2C device ID table to allow the module
to be autoloaded when the device is registered via OF.
Signed-off-by: Javier Martinez Canillas <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>
|
|
KASAN found that our additional element processing scripts drop off
the end of the VPD page into unallocated space. The reason is that
not every element has additional information but our traversal
routines think they do, leading to them expecting far more additional
information than is present. Fix this by adding a gate to the
traversal routine so that it only processes elements that are expected
to have additional information (list is in SES-2 section 6.1.13.1:
Additional Element Status diagnostic page overview)
Reported-by: Pavel Tikhomirov <[email protected]>
Tested-by: Pavel Tikhomirov <[email protected]>
Cc: [email protected]
Signed-off-by: James Bottomley <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
"Five stable fixes:
- Two DM btree bufio buffer leak fixes that resolve reported BUG_ONs
during DM thinp metadata close's dm_bufio_client_destroy().
- A DM thinp range discard fix to handle discarding a partially
mapped range.
- A DM thinp metadata snapshot fix to make sure the btree roots saved
in the metadata snapshot are the most current.
- A DM space map metadata refcounting fix that improves both DM thinp
and DM cache metadata"
* tag 'dm-4.4-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm btree: fix bufio buffer leaks in dm_btree_del() error path
dm space map metadata: fix ref counting bug when bootstrapping a new space map
dm thin metadata: fix bug when taking a metadata snapshot
dm thin metadata: fix bug in dm_thin_remove_range()
dm btree: fix leak of bufio-backed block in btree_split_sibling error path
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse fixes from Miklos Szeredi:
"Two bugfixes, both bound for -stable"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
fuse: break infinite loop in fuse_fill_write_pages()
cuse: fix memory leak
|
|
Pull drm fixes from Dave Airlie:
"Not too much this time.
- One nouveau workaround extended to a few more GPUs
- Some amdgpu big endian fixes, and a regression fixer
- Some vmwgfx fixes
- One ttm locking fix
- One vgaarb fix"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
vgaarb: fix signal handling in vga_get()
radeon: Fix VCE IB test on Big-Endian systems
radeon: Fix VCE ring test for Big-Endian systems
radeon/cik: Fix GFX IB test on Big-Endian
drm/amdgpu: fix the lost duplicates checking
drm/nouveau/pmu: remove whitelist for PGOB-exit WAR, enable by default
drm/vmwgfx: Implement the cursor_set2 callback v2
drm/vmwgfx: fix a warning message
drm/ttm: Fixed a read/write lock imbalance
|
|
Signed-off-by: Axel Lin <[email protected]>
Acked-by: Alban Bedel <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>
|
|
Currently the BUG_ON() checks do not give enough information about the
PTEs being set. This patch changes BUG_ON to WARN_ONCE and dumps the
values of the old and new PTEs. In addition, the checks are only made if
the new PTE entry is valid.
Signed-off-by: Catalin Marinas <[email protected]>
Reported-by: Ming Lei <[email protected]>
Cc: Will Deacon <[email protected]>
|
|
Linux on Vybrid used several different L2 latencies so far, none
of them seem to be the right ones. According to the application note
AN4947 ("Understanding Vybrid Architecture"), the tag portion runs
on CPU clock and is inside the L2 cache controller, whereas the data
portion is stored in the external SRAM running on platform clock.
Hence it is likely that the correct value requires a higher data
latency then tag latency.
These are the values which have been used so far:
- The mainline values:
arm,data-latency = <1 1 1>;
arm,tag-latency = <2 2 2>;
Those values have lead to problems on higher clocks. They look
like a poor translation from the reset values (missing +1 offset
and a mix up between tag/latency values).
- The Linux 3.0 (SoC vendor BSP) values (converted to DT notation):
arm,data-latency = <4 2 3>
arm,tag-latency = <4 2 3>
The cache initialization function along with the value matches the
i.MX6 code from the same kernel, so it seems that those values have
just been copied.
- The Colibri values:
arm,data-latency = <2 1 2>;
arm,tag-latency = <3 2 3>;
Those were a mix between the values of the Linux 3.0 based BSP and
the mainline values above.
- The SoC Reset values (converted to DT notation):
arm,data-latency = <3 3 3>;
arm,tag-latency = <2 2 2>;
So far there is no official statement on what the correct values are.
See also the related Freescale community thread:
https://community.freescale.com/message/579785#579785
For now, the reset values seem to be the best bet. Remove all other
"bogus" values and use the reset value on vf610.dtsi level.
Signed-off-by: Stefan Agner <[email protected]>
Cc: <[email protected]>
Signed-off-by: Shawn Guo <[email protected]>
|
|
There are few defects in vga_get() related to signal hadning:
- we shouldn't check for pending signals for TASK_UNINTERRUPTIBLE
case;
- if we found pending signal we must remove ourself from wait queue
and change task state back to running;
- -ERESTARTSYS is more appropriate, I guess.
Signed-off-by: Kirill A. Shutemov <[email protected]>
Cc: [email protected]
Reviewed-by: David Herrmann <[email protected]>
Signed-off-by: Dave Airlie <[email protected]>
|
|
into drm-fixes
some big endian fixes and one regression fix.
* 'drm-fixes-4.4' of git://people.freedesktop.org/~agd5f/linux:
radeon: Fix VCE IB test on Big-Endian systems
radeon: Fix VCE ring test for Big-Endian systems
radeon/cik: Fix GFX IB test on Big-Endian
drm/amdgpu: fix the lost duplicates checking
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes
Merge "omap fixes against v4.4-rc4" from Tony Lindgren
Few fixes for omaps for v4.4-rc cycle:
- Fix clock source for ARM TWD and global timers on am437x
- Always select REGULATOR_FIXED_VOLTAGE for omap2+ instead of
when MACH_OMAP3_PANDORA is selected
- Fix SPI DMA handles for dm816x as only some were mapped
- Fix up mbox cells for dm816x to make mailbox usable
* tag 'omap-for-v4.4/fixes-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: am4372: fix clock source for arm twd and global timers
ARM: OMAP2+: enable REGULATOR_FIXED_VOLTAGE
ARM: dts: add dm816x missing spi DT dma handles
ARM: dts: add dm816x missing #mbox-cells
|
|
The recent change to use a pwm lookup table for the ezx machines
was incomplete and only changed the a780 model, but not the
other ones in the same file.
This adds the missing calls to pwm_add_table().
Signed-off-by: Arnd Bergmann <[email protected]>
Fixes: c3322022897c ("ARM: pxa: ezx: Use PWM lookup table")
Acked-by: Thierry Reding <[email protected]>
Acked-by: Robert Jarzmik <[email protected]>
|
|
git://git.infradead.org/users/hesselba/linux-berlin into fixes
Merge "Marvell Berlin fixes for 4.4-rc1 (round 1)" from Sebastian Hesselbarth:
- fix wrong SDIO DT clocks on BG2Q
* tag 'berlin-fixes-for-4.4-rc1-1' of git://git.infradead.org/users/hesselba/linux-berlin:
ARM: dts: berlin: add 2nd clock for BG2Q sdhci0 and sdhci1
ARM: dts: berlin: correct BG2Q's sdhci2 2nd clock
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux into fixes
Merge "Second fixes for 4.4" from Alexandre Belloni:
- fix of a hardware setup that prevents the sd/mmc interface to show up on
sama5d2.
- proper selection of pinctrl drivers. PIO4 is necessary for the sama5d2 to
boot.
* tag 'at91-4.4-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
ARM: at91: fix pinctrl driver selection
ARM: at91/dt: add always-on to 1.8V regulator
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into fixes
Merge "Fixes for Exynos" from Krzysztof Kozlowski:
1. Fix potential NULL pointer dereference in Exynos PMU driver.
2. Remove incorrect __init annotation from s3c24xx cpufreq driver
structures.
* tag 'samsung-fixes-4.4' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
cpufreq: s3c24xx: Do not mark s3c2410_plls_add as __init
ARM: EXYNOS: Fix potential NULL pointer access in exynos_sys_powerdown_conf
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma
Pull rdma fixes from Doug Ledford:
"Most are minor to important fixes.
There is one performance enhancement that I took on the grounds that
failing to check if other processes can run before running what's
intended to be a background, idle-time task is a bug, even though the
primary effect of the fix is to improve performance (and it was a very
simple patch)"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma:
IB/mlx5: Postpone remove_keys under knowledge of coming preemption
IB/mlx4: Use vmalloc for WR buffers when needed
IB/mlx4: Use correct order of variables in log message
iser-target: Remove explicit mlx4 work-around
mlx4: Expose correct max_sge_rd limit
IB/mad: Require CM send method for everything except ClassPortInfo
IB/cma: Add a missing rcu_read_unlock()
IB core: Fix ib_sg_to_pages()
IB/srp: Fix srp_map_sg_fr()
IB/srp: Fix indirect data buffer rkey endianness
IB/srp: Initialize dma_length in srp_map_idb
IB/srp: Fix possible send queue overflow
IB/srp: Fix a memory leak
IB/sa: Put netlink request into the request list before sending
IB/iser: use sector_div instead of do_div
IB/core: use RCU for uverbs id lookup
IB/qib: Minor fixes to qib per SFF 8636
IB/core: Fix user mode post wr corruption
IB/qib: Fix qib_mr structure
|
|
The calculation equation of PAD_OWN register offset is not
correct for Broxton, verified this fix will get right
offset for Broxton.
Signed-off-by: Qi Zheng <[email protected]>
Signed-off-by: Qipeng Zha <[email protected]>
Acked-by: Mika Westerberg <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>
|
|
The group size for registers PADCFGLOCK, HOSTSW_OWN, GPI_IS,
GPI_IE, are not 24 for Broxton, Add a parameter to allow
different platform to set correct value.
Signed-off-by: Qi Zheng <[email protected]>
Signed-off-by: Qipeng Zha <[email protected]>
Acked-by: Mika Westerberg <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>
|
|
We removed CLK_IGNORE_UNUSED from CLKID_SDIO's flag, so the sdhci0 and
sdhci1 don't work. We fix this by adding the optional 2nd clock for
BG2Q's sdhci0 and sdhci1. This patch brings another benefit: the 2nd
clock can be disabled during runtime pm, so saves power a bit.
Signed-off-by: Jisheng Zhang <[email protected]>
Signed-off-by: Sebastian Hesselbarth <[email protected]>
|
|
The optional 2nd clock is CLKID_SDIO. We removed CLK_IGNORE_UNUSED
from CLKID_SDIO's flag, so the sdhci2 doesn't work. This patch fixes
this issue by correcting the sdhci2's 2nd clock.
Signed-off-by: Jisheng Zhang <[email protected]>
Signed-off-by: Sebastian Hesselbarth <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Again less intensive changes in this rc: you can find only a few
HD-audio fixes (noise fixes for Intel Broxton chip and a few Thinkpad
models, quirks for Alienware 17 and Packard Bell DOTS) in addition to
a long-standing rme96 bug fix"
* tag 'sound-4.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/ca0132 - quirk for Alienware 17 2015
ALSA: hda - Fix noise problems on Thinkpad T440s
ALSA: hda - Fixing speaker noise on the two latest thinkpad models
ALSA: hda - Add inverted dmic for Packard Bell DOTS
ALSA: hda - Fix playback noise with 24/32 bit sample size on BXT
ALSA: rme96: Fix unexpected volume reset after rate changes
|
|
The EP93xx is registering a clocksource of 40 bits with
clocksource_mmio_init() but this is not working because of this
artificial limitation. It works fine to lift the uppe limit to
64 bits, and since cycle_t is u64, it should intuitively have been
like that from the beginning.
Fixes: 000bc17817bf "ARM: ep93xx: switch to GENERIC_CLOCKEVENTS"
Reported-by: Alexander Sverdlin <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>
Cc: Daniel Lezcano <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Thomas Gleixner <[email protected]>
|
|
Both the 32bit and 64bit versions of the GICv3 header file are using
barriers, but neglect to include barrier.h, leading to an interesting
splat in some circumstances.
Signed-off-by: Marc Zyngier <[email protected]>
Cc: <[email protected]>
Cc: Jason Cooper <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Thomas Gleixner <[email protected]>
|
|
When the GICv3 header file is used in a C file that doesn't include
any of the OF stuff, we end up with a bunch of ugly warnings.
Let's keep GCC quiet by adding a forward declaration.
Signed-off-by: Marc Zyngier <[email protected]>
Cc: <[email protected]>
Cc: Jason Cooper <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Thomas Gleixner <[email protected]>
|
|
This reverts commit 49718f0fb8c9 ("SCSI: Fix NULL pointer dereference in
runtime PM")
The old commit may lead to a issue that blk_{pre|post}_runtime_suspend and
blk_{pre|post}_runtime_resume may not be called in pairs.
Take sr device as example, when sr device goes to runtime suspend,
blk_{pre|post}_runtime_suspend will be called since sr device defined
pm->runtime_suspend. But blk_{pre|post}_runtime_resume will not be called
since sr device doesn't have pm->runtime_resume. so, sr device can not
resume correctly anymore.
More discussion can be found from below link.
http://marc.info/?l=linux-scsi&m=144163730531875&w=2
Signed-off-by: Ken Xue <[email protected]>
Acked-by: Alan Stern <[email protected]>
Cc: Xiangliang Yu <[email protected]>
Cc: James E.J. Bottomley <[email protected]>
Cc: Jens Axboe <[email protected]>
Cc: Michael Terry <[email protected]>
Cc: [email protected]
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
CONFIG_NF_CONNTRACK=m
CONFIG_NF_DUP_IPV4=y
results in:
net/built-in.o: In function `nf_dup_ipv4':
>> (.text+0xd434f): undefined reference to `nf_conntrack_untracked'
Reported-by: kbuild test robot <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
|
|
skbuff clones
If we attach the sk to the skb from nfnetlink_rcv_batch(), then
netlink_skb_destructor() will underflow the socket receive memory
counter and we get warning splat when releasing the socket.
$ cat /proc/net/netlink
sk Eth Pid Groups Rmem Wmem Dump Locks Drops Inode
ffff8800ca903000 12 0 00000000 -54144 0 0 2 0 17942
^^^^^^
Rmem above shows an underflow.
And here below the warning splat:
[ 1363.815976] WARNING: CPU: 2 PID: 1356 at net/netlink/af_netlink.c:958 netlink_sock_destruct+0x80/0xb9()
[...]
[ 1363.816152] CPU: 2 PID: 1356 Comm: kworker/u16:1 Tainted: G W 4.4.0-rc1+ #153
[ 1363.816155] Hardware name: LENOVO 23259H1/23259H1, BIOS G2ET32WW (1.12 ) 05/30/2012
[ 1363.816160] Workqueue: netns cleanup_net
[ 1363.816163] 0000000000000000 ffff880119203dd0 ffffffff81240204 0000000000000000
[ 1363.816169] ffff880119203e08 ffffffff8104db4b ffffffff813d49a1 ffff8800ca771000
[ 1363.816174] ffffffff81a42b00 0000000000000000 ffff8800c0afe1e0 ffff880119203e18
[ 1363.816179] Call Trace:
[ 1363.816181] <IRQ> [<ffffffff81240204>] dump_stack+0x4e/0x79
[ 1363.816193] [<ffffffff8104db4b>] warn_slowpath_common+0x9a/0xb3
[ 1363.816197] [<ffffffff813d49a1>] ? netlink_sock_destruct+0x80/0xb9
skb->sk was only needed to lookup for the netns, however we don't need
this anymore since 633c9a840d0b ("netfilter: nfnetlink: avoid recurrent
netns lookups in call_batch") so this patch removes this manual socket
assignment to resolve this problem.
Reported-by: Arturo Borrero Gonzalez <[email protected]>
Reported-by: Ben Hutchings <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Tested-by: Arturo Borrero Gonzalez <[email protected]>
|
|
To support i.MX7D Low Power State Retention IOMUXC, commit e7b37a522aa9
("pinctrl: freescale: imx: allow mux_reg offset zero") changes the way
of zero mux_reg offset support with a new flag ZERO_OFFSET_VALID. But,
unfortunately, it forgot to add this flag for vf610 pinctrl which has
zero mux_reg offset be valid as well, and hence breaks the vf610
support.
Fix the regression by adding flag ZERO_OFFSET_VALID for vf610 pinctrl
driver.
Signed-off-by: Shawn Guo <[email protected]>
Fixes: e7b37a522aa9 ("pinctrl: freescale: imx: allow mux_reg offset zero")
Reported-by: Andrew Lunn <[email protected]>
Tested-by: Andrew Lunn <[email protected]>
Acked-by: Stefan Agner <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>
|
|
TMP102 works based on conversions done periodically. However, as per
the TMP102 data sheet[1] the first conversion is triggered immediately
after we program the configuration register. The temperature data
registers do not reflect proper data until the first conversion is
complete (in our case HZ/4).
The driver currently sets the last_update to be jiffies - HZ, just
after the configuration is complete. When TMP102 driver registers
with the thermal framework, it immediately tries to read the sensor
temperature data. This takes place even before the conversion on the
TMP102 is complete and results in an invalid temperature read.
Depending on the value read, this may cause thermal framework to
assume that a critical temperature event has occurred and attempts to
shutdown the system.
Instead of causing an invalid mid-conversion value to be read
erroneously, we mark the last_update to be in-line with the current
jiffies. This allows the tmp102_update_device function to skip update
until the required conversion time is complete. Further, we ensure to
return -EAGAIN result instead of returning spurious temperature (such
as 0C) values to the caller to prevent any wrong decisions made with
such values. NOTE: this allows the read functions not to be blocking
and allows the callers to make the decision if they would like to
block or try again later. At least the current user(thermal) seems to
handle this by retrying later.
A simpler alternative approach could be to sleep in the probe for the
duration required, but that will result in latency that is undesirable
and delay boot sequence un-necessarily.
[1] http://www.ti.com/lit/ds/symlink/tmp102.pdf
Cc: Eduardo Valentin <[email protected]>
Reported-by: Aparna Balasubramanian <[email protected]>
Reported-by: Elvita Lobo <[email protected]>
Reported-by: Yan Liu <[email protected]>
Signed-off-by: Nishanth Menon <[email protected]>
Signed-off-by: Guenter Roeck <[email protected]>
|
|
Simple enclosure implementations (mostly USB) are allowed to return only
page 8 to every diagnostic query. That really confuses our
implementation because we assume the return is the page we asked for and
end up doing incorrect offsets based on bogus information leading to
accesses outside of allocated ranges. Fix that by checking the page
code of the return and giving an error if it isn't the one we asked for.
This should fix reported bugs with USB storage by simply refusing to
attach to enclosures that behave like this. It's also good defensive
practise now that we're starting to see more USB enclosures.
Reported-by: Andrea Gelmini <[email protected]>
Cc: [email protected]
Reviewed-by: Ewan D. Milne <[email protected]>
Reviewed-by: Tomas Henzl <[email protected]>
Signed-off-by: James Bottomley <[email protected]>
|
|
If dm_btree_del()'s call to push_frame() fails, e.g. due to
btree_node_validator finding invalid metadata, the dm_btree_del() error
path must unlock all frames (which have active dm-bufio buffers) that
were pushed onto the del_stack.
Otherwise, dm_bufio_client_destroy() will BUG_ON() because dm-bufio
buffers have leaked, e.g.:
device-mapper: bufio: leaked buffer 3, hold count 1, list 0
Signed-off-by: Joe Thornber <[email protected]>
Signed-off-by: Mike Snitzer <[email protected]>
Cc: [email protected]
|
|
Pass the net pointer to the call_batch callback functions so we can skip
recurrent lookups.
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Tested-by: Arturo Borrero Gonzalez <[email protected]>
|
|
When an inconsistent space cache is detected during loading we log a
warning that users frequently mistake as instruction to invalidate the
cache manually, even though this is not required. Fix the message to
indicate that the cache will be rebuilt automatically.
Signed-off-by: Holger Hoffstätte <[email protected]>
Acked-by: Filipe Manana <[email protected]>
|
|
When disable_noatomic is called plane_mask is not correct yet, and
plane_state->visible = true is left as true after disabling the primary
plane.
Other planes are already disabled as part of crtc sanitization, only the
primary is left active. But the plane_mask is not updated here. It gets
updated during fb takeover in modeset_gem_init, or set to the new value
on resume.
This means that to disable the primary plane 1 << drm_plane_index(primary)
needs to be used.
Afterwards because the crtc is no longer active it's forbidden to keep
plane_state->visible set, or a WARN_ON in
intel_plane_atomic_calc_changes triggers. There are other code points
that rely on accurate plane_state->visible too, so make sure the bool is
cleared.
The other planes are already disabled in intel_sanitize_crtc, so they
don't have to be handled here.
Cc: [email protected] #v4.3, v4.2?
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92655
Tested-by: Tomas Mezzadra <[email protected]>
Signed-off-by: Maarten Lankhorst <[email protected]>
Reviewed-by: Daniel Vetter <[email protected]>
Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit 54a4196188eab82e6f0a5f05716626e9f18b8fb6)
Signed-off-by: Jani Nikula <[email protected]>
|
|
If we fail to allocate a new data chunk, we were jumping to the error path
without release the transaction handle we got before. Fix this by always
releasing it before doing the jump.
Fixes: 2c9fe8355258 ("btrfs: Fix lost-data-profile caused by balance bg")
Signed-off-by: Filipe Manana <[email protected]>
|
|
As of my previous change titled "Btrfs: fix scrub preventing unused block
groups from being deleted", the following warning at
extent-tree.c:btrfs_delete_unused_bgs() can be hit when we mount the a
filesysten with "-o discard":
10263 void btrfs_delete_unused_bgs(struct btrfs_fs_info *fs_info)
10264 {
(...)
10405 if (trimming) {
10406 WARN_ON(!list_empty(&block_group->bg_list));
10407 spin_lock(&trans->transaction->deleted_bgs_lock);
10408 list_move(&block_group->bg_list,
10409 &trans->transaction->deleted_bgs);
10410 spin_unlock(&trans->transaction->deleted_bgs_lock);
10411 btrfs_get_block_group(block_group);
10412 }
(...)
This happens because scrub can now add back the block group to the list of
unused block groups (fs_info->unused_bgs). This is dangerous because we
are moving the block group from the unused block groups list to the list
of deleted block groups without holding the lock that protects the source
list (fs_info->unused_bgs_lock).
The following diagram illustrates how this happens:
CPU 1 CPU 2
cleaner_kthread()
btrfs_delete_unused_bgs()
sees bg X in list
fs_info->unused_bgs
deletes bg X from list
fs_info->unused_bgs
scrub_enumerate_chunks()
searches device tree using
its commit root
finds device extent for
block group X
gets block group X from the tree
fs_info->block_group_cache_tree
(via btrfs_lookup_block_group())
sets bg X to RO (again)
scrub_chunk(bg X)
sets bg X back to RW mode
adds bg X to the list
fs_info->unused_bgs again,
since it's still unused and
currently not in that list
sets bg X to RO mode
btrfs_remove_chunk(bg X)
--> discard is enabled and bg X
is in the fs_info->unused_bgs
list again so the warning is
triggered
--> we move it from that list into
the transaction's delete_bgs
list, but we can have another
task currently manipulating
the first list (fs_info->unused_bgs)
Fix this by using the same lock (fs_info->unused_bgs_lock) to protect both
the list of unused block groups and the list of deleted block groups. This
makes it safe and there's not much worry for more lock contention, as this
lock is seldom used and only the cleaner kthread adds elements to the list
of deleted block groups. The warning goes away too, as this was previously
an impossible case (and would have been better a BUG_ON/ASSERT) but it's
not impossible anymore.
Reproduced with fstest btrfs/073 (using MOUNT_OPTIONS="-o discard").
Signed-off-by: Filipe Manana <[email protected]>
|
|
Some users of rfkill, like NFC and cfg80211, use a dynamic name when
allocating rfkill, in those cases dev_name(). Therefore, the pointer
passed to rfkill_alloc() might not be valid forever, I specifically
found the case that the rfkill name was quite obviously an invalid
pointer (or at least garbage) when the wiphy had been renamed.
Fix this by making a copy of the rfkill name in rfkill_alloc().
Cc: [email protected]
Signed-off-by: Johannes Berg <[email protected]>
|
|
This patch fixes at_xdmac_prep_dma_memcpy(). Indeed the data width field
of the Channel Configuration register was not updated properly in the
loop: the bits of the dwidth field were not cleared before adding their
new value.
Signed-off-by: Cyrille Pitchen <[email protected]>
Acked-by: Ludovic Desroches <[email protected]>
Fixes: e1f7c9eee70 ("dmaengine: at_xdmac: creation of the atmel eXtended DMA Controller driver")
Cc: [email protected] #4.1 and later
Signed-off-by: Vinod Koul <[email protected]>
|
|
|
|
This change makes the DT file to be easier to read since the reserved slots
array does not need the '/bits/ 16' to be specified, which might confuse
some people.
Signed-off-by: Peter Ujfalusi <[email protected]>
Acked-by: Arnd Bergmann <[email protected]>
Acked-by: Rob Herring <[email protected]>
Acked-by: Tony Lindgren <[email protected]>
Signed-off-by: Vinod Koul <[email protected]>
|
|
This change makes the DT file to be easier to read since the memcpy
channels array does not need the '/bits/ 16' to be specified, which might
confuse some people.
Signed-off-by: Peter Ujfalusi <[email protected]>
Acked-by: Arnd Bergmann <[email protected]>
Acked-by: Rob Herring <[email protected]>
Acked-by: Tony Lindgren <[email protected]>
Signed-off-by: Vinod Koul <[email protected]>
|
|
Pull VFIO fixes from Alex Williamson:
- Various fixes for removing redundancy, const'ifying structs, avoiding
stack usage, fixing WARN usage (Krzysztof Kozlowski, Julia Lawall,
Kees Cook, Dan Carpenter)
- Revert No-IOMMU mode as the intended user has not emerged (Alex
Williamson)
* tag 'vfio-v4.4-rc5' of git://github.com/awilliam/linux-vfio:
Revert: "vfio: Include No-IOMMU mode"
vfio: fix a warning message
vfio: platform: remove needless stack usage
vfio-pci: constify pci_error_handlers structures
vfio: Drop owner assignment from platform_driver
|
|
ARM TWD and Global timer are clocked by PERIPHCLK which is MPU_CLK/2.
But now they are clocked by dpll_mpu_m2_ck == MPU_CLK and, as result.
Timekeeping core misbehaves. For example, execution of command
"sleep 5" will take 10 sec instead of 5.
Hence, fix it by adding mpu_periphclk ("fixed-factor-clock") and use
it for clocking ARM TWD and Global timer (same way as on OMAP4).
Cc: Tony Lindgren <[email protected]>
Cc: Felipe Balbi <[email protected]>
Cc: Tero Kristo <[email protected]>
Fixes:commit 8cbd4c2f6a99 ("arm: boot: dts: am4372: add ARM timers and SCU nodes")
Signed-off-by: Grygorii Strashko <[email protected]>
Reviewed-by: Felipe Balbi <[email protected]>
Signed-off-by: Tony Lindgren <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull DT fixes from Rob Herring:
"I think this should be all for 4.4:
- Fix incorrect warning about overlapping memory regions
- Export of_irq_find_parent again which was made static in 4.4, but
has users pending for 4.5.
- Fix of_msi_map_rid declaration location
- Fix re-entrancy for of_fdt_unflatten_tree
- Clean-up of phys_addr_t printks"
* tag 'devicetree-fixes-for-4.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
of/irq: move of_msi_map_rid declaration to the correct ifdef section
of/irq: Export of_irq_find_parent again
of/fdt: Add mutex protection for calls to __unflatten_device_tree()
of/address: fix typo in comment block of of_translate_one()
of: do not use 0x in front of %pa
of: Fix comparison of reserved memory regions
|
|
A runtime PM centric subsystem/driver may typically use the runtime PM
helpers, pm_runtime_force_suspend|resume() in the system PM path. This
means the genpd's runtime PM callbacks might be invoked even when runtime
PM has been disabled for the device.
To properly cope with these and similar scenarios when these helper
functions are used, change genpd to skip validating and measuring the
device PM QOS latency.
This is needed because otherwise genpd may prevent the device to be put
into low power state. If this occurs during system PM, it causes the
sequence to be aborted as a device's system PM callback returns -EBUSY.
Fixes: ba2bbfbf6307 (PM / Domains: Remove intermediate states from the power off sequence)
Reported-by: Cao Minh Hiep <[email protected]>
Reported-by: Harunaga <[email protected]>
Signed-off-by: Ulf Hansson <[email protected]>
Cc: 4.3+ <[email protected]> # 4.3+
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"One small build fix, a couple do_div() fixes, and a fix for the gpio
basic clock type are the major changes here. There's also a couple
fixes for the TI, sunxi, and scpi clock drivers"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: sunxi: pll2: Fix clock running too fast
clk: scpi: add missing of_node_put
clk: qoriq: fix memory leak
imx/clk-pllv2: fix wrong do_div() usage
imx/clk-pllv1: fix wrong do_div() usage
clk: mmp: add linux/clk.h includes
clk: ti: drop locking code from mux/divider drivers
clk: ti816x: Add missing dmtimer clkdev entries
clk: ti: fapll: fix wrong do_div() usage
clk: ti: clkt_dpll: fix wrong do_div() usage
clk: gpio: Get parent clk names in of_gpio_clk_setup()
|
|
Pull IPMI fix from Corey Minyard:
"Fix an Oops if an interrupt occurs at startup. This can happen on
some hardware"
* tag 'for-linus-4.4-1' of git://git.code.sf.net/p/openipmi/linux-ipmi:
ipmi: move timer init to before irq is setup
|
|
We encountered a panic on boot in ipmi_si on a dell per320 due to an
uninitialized timer as follows.
static int smi_start_processing(void *send_info,
ipmi_smi_t intf)
{
/* Try to claim any interrupts. */
if (new_smi->irq_setup)
new_smi->irq_setup(new_smi);
--> IRQ arrives here and irq handler tries to modify uninitialized timer
which triggers BUG_ON(!timer->function) in __mod_timer().
Call Trace:
<IRQ>
[<ffffffffa0532617>] start_new_msg+0x47/0x80 [ipmi_si]
[<ffffffffa053269e>] start_check_enables+0x4e/0x60 [ipmi_si]
[<ffffffffa0532bd8>] smi_event_handler+0x1e8/0x640 [ipmi_si]
[<ffffffff810f5584>] ? __rcu_process_callbacks+0x54/0x350
[<ffffffffa053327c>] si_irq_handler+0x3c/0x60 [ipmi_si]
[<ffffffff810efaf0>] handle_IRQ_event+0x60/0x170
[<ffffffff810f245e>] handle_edge_irq+0xde/0x180
[<ffffffff8100fc59>] handle_irq+0x49/0xa0
[<ffffffff8154643c>] do_IRQ+0x6c/0xf0
[<ffffffff8100ba53>] ret_from_intr+0x0/0x11
/* Set up the timer that drives the interface. */
setup_timer(&new_smi->si_timer, smi_timeout, (long)new_smi);
The following patch fixes the problem.
To: [email protected]
To: Corey Minyard <[email protected]>
CC: [email protected]
Signed-off-by: Jan Stancek <[email protected]>
Signed-off-by: Tony Camuso <[email protected]>
Signed-off-by: Corey Minyard <[email protected]>
Cc: [email protected] # Applies cleanly to 3.10-, needs small rework before
|
|
ROL on a 32 bit integer with a shift of 32 or more is undefined and the
result is arch-dependent. Avoid this by handling the trivial case of
roling by 0 correctly.
The trivial solution of checking if shift is 0 breaks gcc's detection
of this code as a ROL instruction, which is unacceptable.
This bug was reported and fixed in GCC
(https://gcc.gnu.org/bugzilla/show_bug.cgi?id=57157):
The standard rotate idiom,
(x << n) | (x >> (32 - n))
is recognized by gcc (for concreteness, I discuss only the case that x
is an uint32_t here).
However, this is portable C only for n in the range 0 < n < 32. For n
== 0, we get x >> 32 which gives undefined behaviour according to the
C standard (6.5.7, Bitwise shift operators). To portably support n ==
0, one has to write the rotate as something like
(x << n) | (x >> ((-n) & 31))
And this is apparently not recognized by gcc.
Note that this is broken on older GCCs and will result in slower ROL.
Acked-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|