aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2020-09-24Merge tag 'media/v5.9-3' of ↵Linus Torvalds16-175/+101
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fixes from Mauro Carvalho Chehab: - fix a regression at the CEC adapter core - two uAPI patches (one revert) for changes in this development cycle * tag 'media/v5.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: media: dt-bindings: media: imx274: Convert to json-schema media: media/v4l2: remove V4L2_FLAG_MEMORY_NON_CONSISTENT flag media: cec-adap.c: don't use flush_scheduled_work()
2020-09-24Merge tag 'sound-5.9-rc7' of ↵Linus Torvalds4-8/+18
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Just a handful small device-specific fixes including a couple of reverts" * tag 'sound-5.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: Revert "ALSA: usb-audio: Disable Lenovo P620 Rear line-in volume control" Revert "ALSA: hda - Fix silent audio output and corrupted input on MSI X570-A PRO" ALSA: usb-audio: Add delay quirk for H570e USB headsets ALSA: hda/realtek: Enable front panel headset LED on Lenovo ThinkStation P520 ALSA: hda/realtek - Couldn't detect Mic if booting with headset plugged ALSA: asihpi: fix iounmap in error handler
2020-09-25scripts/kallsyms: skip ppc compiler stub *.long_branch.* / *.plt_branch.*Masahiro Yamada1-1/+15
PowerPC allmodconfig often fails to build as follows: LD .tmp_vmlinux.kallsyms1 KSYM .tmp_vmlinux.kallsyms1.o LD .tmp_vmlinux.kallsyms2 KSYM .tmp_vmlinux.kallsyms2.o LD .tmp_vmlinux.kallsyms3 KSYM .tmp_vmlinux.kallsyms3.o LD vmlinux SORTTAB vmlinux SYSMAP System.map Inconsistent kallsyms data Try make KALLSYMS_EXTRA_PASS=1 as a workaround make[2]: *** [../Makefile:1162: vmlinux] Error 1 Setting KALLSYMS_EXTRA_PASS=1 does not help. This is caused by the compiler inserting stubs such as *.long_branch.* and *.plt_branch.* $ powerpc-linux-nm -n .tmp_vmlinux.kallsyms2 [ snip ] c00000000210c010 t 00000075.plt_branch.da9:19 c00000000210c020 t 00000075.plt_branch.1677:5 c00000000210c030 t 00000075.long_branch.memmove c00000000210c034 t 00000075.plt_branch.9e0:5 c00000000210c044 t 00000075.plt_branch.free_initrd_mem ... Actually, the problem mentioned in scripts/link-vmlinux.sh comments; "In theory it's possible this results in even more stubs, but unlikely" is happening here, and ends up with another kallsyms step required. scripts/kallsyms.c already ignores various compiler stubs. Let's do similar to make kallsysms for PowerPC always succeed in 2 steps. Reported-by: Guenter Roeck <[email protected]> Signed-off-by: Masahiro Yamada <[email protected]> Tested-by: Guenter Roeck <[email protected]>
2020-09-24mm: fix misplaced unlock_page in do_wp_page()Linus Torvalds1-1/+1
Commit 09854ba94c6a ("mm: do_wp_page() simplification") reorganized all the code around the page re-use vs copy, but in the process also moved the final unlock_page() around to after the wp_page_reuse() call. That normally doesn't matter - but it means that the unlock_page() is now done after releasing the page table lock. Again, not a big deal, you'd think. But it turns out that it's very wrong indeed, because once we've released the page table lock, we've basically lost our only reference to the page - the page tables - and it could now be free'd at any time. We do hold the mmap_sem, so no actual unmap() can happen, but madvise can come in and a MADV_DONTNEED will zap the page range - and free the page. So now the page may be free'd just as we're unlocking it, which in turn will usually trigger a "Bad page state" error in the freeing path. To make matters more confusing, by the time the debug code prints out the page state, the unlock has typically completed and everything looks fine again. This all doesn't happen in any normal situations, but it does trigger with the dirtyc0w_child LTP test. And it seems to trigger much more easily (but not expclusively) on s390 than elsewhere, probably because s390 doesn't do the "batch pages up for freeing after the TLB flush" that gives the unlock_page() more time to complete and makes the race harder to hit. Fixes: 09854ba94c6a ("mm: do_wp_page() simplification") Link: https://lore.kernel.org/lkml/[email protected]/ Link: https://lore.kernel.org/linux-mm/[email protected]/ Reported-by: Qian Cai <[email protected]> Reported-by: Alex Shi <[email protected]> Bisected-and-analyzed-by: Gerald Schaefer <[email protected]> Tested-by: Gerald Schaefer <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2020-09-24spi: bcm-qspi: Fix probe regression on iProc platformsRay Jui1-1/+1
iProc chips have QSPI controller that does not have the MSPI_REV offset. Reading from that offset will cause a bus error. Fix it by having MSPI_REV query disabled in the generic compatible string. Fixes: 3a01f04d74ef ("spi: bcm-qspi: Handle lack of MSPI_REV offset") Link: https://lore.kernel.org/linux-arm-kernel/[email protected]/T/#u Signed-off-by: Ray Jui <[email protected]> Acked-by: Florian Fainelli <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2020-09-24s390/zcrypt: Fix ZCRYPT_PERDEV_REQCNT ioctlChristian Borntraeger1-1/+2
reqcnt is an u32 pointer but we do copy sizeof(reqcnt) which is the size of the pointer. This means we only copy 8 byte. Let us copy the full monty. Signed-off-by: Christian Borntraeger <[email protected]> Cc: Harald Freudenberger <[email protected]> Cc: [email protected] Fixes: af4a72276d49 ("s390/zcrypt: Support up to 256 crypto adapters.") Reviewed-by: Harald Freudenberger <[email protected]> Signed-off-by: Vasily Gorbik <[email protected]>
2020-09-23Merge tag 'trace-v5.9-rc5-2' of ↵Linus Torvalds2-14/+49
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull bootconfig fixes from Steven Rostedt: "A couple of fixes for bootconfig. Masami discovered two bugs which this fixes and he added tests to cover these issues. - Fix a bug that breaks bootconfig tree nodes - Fix a bug that does not truncate whitespace properly - Add tests to cover the above two cases" * tag 'trace-v5.9-rc5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tools/bootconfig: Add testcase for tailing space tools/bootconfig: Add testcases for repeated key with brace lib/bootconfig: Fix to remove tailing spaces after value lib/bootconfig: Fix a bug of breaking existing tree nodes
2020-09-23Merge tag 'for-5.9/dm-fixes-2' of ↵Linus Torvalds2-23/+14
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fixes from Mike Snitzer: - DM core fix for incorrect double bio splitting. Keep "fixing" this because past attempts didn't fully appreciate the liability relative to recursive bio splitting. This fix limits DM's bio splitting to a single method and does _not_ use blk_queue_split() for normal IO. - DM crypt Documentation updates for features added during 5.9 merge. * tag 'for-5.9/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm crypt: document encrypted keyring key option dm crypt: document new no_workqueue flags dm: fix comment in dm_process_bio() dm: fix bio splitting and its bio completion order for regular IO
2020-09-23Merge tag 'for-5.9-rc6-tag' of ↵Linus Torvalds2-12/+15
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: "syzkaller started to hit us with reports, here's a fix for one type (stack overflow when printing checksums on read error). The other patch is a fix for sysfs object, we have a test for that and it leads to a crash." * tag 'for-5.9-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: fix put of uninitialized kobject after seed device delete btrfs: fix overflow when copying corrupt csums for a message
2020-09-23x86/ioapic: Unbreak check_timer()Thomas Gleixner1-0/+1
Several people reported in the kernel bugzilla that between v4.12 and v4.13 the magic which works around broken hardware and BIOSes to find the proper timer interrupt delivery mode stopped working for some older affected platforms which need to fall back to ExtINT delivery mode. The reason is that the core code changed to keep track of the masked and disabled state of an interrupt line more accurately to avoid the expensive hardware operations. That broke an assumption in i8259_make_irq() which invokes disable_irq_nosync(); irq_set_chip_and_handler(); enable_irq(); Up to v4.12 this worked because enable_irq() unconditionally unmasked the interrupt line, but after the state tracking improvements this is not longer the case because the IO/APIC uses lazy disabling. So the line state is unmasked which means that enable_irq() does not call into the new irq chip to unmask it. In principle this is a shortcoming of the core code, but it's more than unclear whether the core code should try to reset state. At least this cannot be done unconditionally as that would break other existing use cases where the chip type is changed, e.g. when changing the trigger type, but the callers expect the state to be preserved. As the way how check_timer() is switching the delivery modes is truly unique, the obvious fix is to simply unmask the i8259 manually after changing the mode to ExtINT delivery and switching the irq chip to the legacy PIC. Note, that the fixes tag is not really precise, but identifies the commit which broke the assumptions in the IO/APIC and i8259 code and that's the kernel version to which this needs to be backported. Fixes: bf22ff45bed6 ("genirq: Avoid unnecessary low level irq function calls") Reported-by: [email protected] Reported-by: [email protected] Reported-by: [email protected] Reported-by: [email protected] Reported-by: [email protected] Signed-off-by: Thomas Gleixner <[email protected]> Tested-by: [email protected] Tested-by: [email protected] Cc: [email protected] Link: https://bugzilla.kernel.org/show_bug.cgi?id=197769
2020-09-23nvme-core: don't use NVME_NSID_ALL for command effects and supported logChaitanya Kulkarni1-1/+1
In the function nvme_get_effects_log() it uses NVME_NSID_ALL which has namespace scope. The command effect log page is controller specific. Replace NVME_NSID_ALL with 0x00 which specifies the controller scope instead of namespace scope. Fixes: 84fef62d135b ("nvme: check admin passthru command effects") Link: https://bugzilla.kernel.org/show_bug.cgi?id=209287 Reported-by: Huai-Cheng Kuo <[email protected]> Signed-off-by: Chaitanya Kulkarni <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]>
2020-09-23mm: move the copy_one_pte() pte_present check into the callerLinus Torvalds1-12/+12
This completes the split of the non-present and present pte cases by moving the check for the source pte being present into the single caller, which also means that we clearly separate out the very different return value case for a non-present pte. The present pte case currently always succeeds. This is a pure code re-organization with no semantic change: the intent is to make it much easier to add a new return case to the present pte case for when we do early COW at page table copy time. This was split out from the previous commit simply to make it easy to visually see that there were no semantic changes from this code re-organization. Signed-off-by: Linus Torvalds <[email protected]>
2020-09-23mm: split out the non-present case from copy_one_pte()Linus Torvalds1-67/+79
This is a purely mechanical split of the copy_one_pte() function. It's not immediately obvious when looking at the diff because of the indentation change, but the way to see what is going on in this commit is to use the "-w" flag to not show pure whitespace changes, and you see how the first part of copy_one_pte() is simply lifted out into a separate function. And since the non-present case is marked unlikely, don't make the new function be inlined. Not that gcc really seems to care, since it looks like it will inline it anyway due to the whole "single callsite for static function" logic. In fact, code generation with the function split is almost identical to before. But not marking it inline is the right thing to do. This is pure prep-work and cleanup for subsequent changes. Signed-off-by: Linus Torvalds <[email protected]>
2020-09-23spi: fsl-dspi: fix use-after-free in remove pathSascha Hauer1-5/+7
spi_unregister_controller() not only unregisters the controller, but also frees the controller. This will free the driver data with it, so we must not access it later dspi_remove(). Solve this by allocating the driver data separately from the SPI controller. Signed-off-by: Sascha Hauer <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2020-09-23regulator: axp20x: fix LDO2/4 descriptionIcenowy Zheng1-3/+4
Currently we wrongly set the mask of value of LDO2/4 both to the mask of LDO2, and the LDO4 voltage configuration is left untouched. This leads to conflict when LDO2/4 are both in use. Fix this issue by setting different vsel_mask to both regulators. Fixes: db4a555f7c4c ("regulator: axp20x: use defines for masks") Signed-off-by: Icenowy Zheng <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2020-09-23selftests: kvm: Fix assert failure in single-step testYang Weijiang1-1/+1
This is a follow-up patch to fix an issue left in commit: 98b0bf02738004829d7e26d6cb47b2e469aaba86 selftests: kvm: Use a shorter encoding to clear RAX With the change in the commit, we also need to modify "xor" instruction length from 3 to 2 in array ss_size accordingly to pass below check: for (i = 0; i < (sizeof(ss_size) / sizeof(ss_size[0])); i++) { target_rip += ss_size[i]; CLEAR_DEBUG(); debug.control = KVM_GUESTDBG_ENABLE | KVM_GUESTDBG_SINGLESTEP; debug.arch.debugreg[7] = 0x00000400; APPLY_DEBUG(); vcpu_run(vm, VCPU_ID); TEST_ASSERT(run->exit_reason == KVM_EXIT_DEBUG && run->debug.arch.exception == DB_VECTOR && run->debug.arch.pc == target_rip && run->debug.arch.dr6 == target_dr6, "SINGLE_STEP[%d]: exit %d exception %d rip 0x%llx " "(should be 0x%llx) dr6 0x%llx (should be 0x%llx)", i, run->exit_reason, run->debug.arch.exception, run->debug.arch.pc, target_rip, run->debug.arch.dr6, target_dr6); } Reported-by: kernel test robot <[email protected]> Signed-off-by: Yang Weijiang <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2020-09-23KVM: x86: VMX: Make smaller physical guest address space support ↵Mohammed Gamal3-7/+15
user-configurable This patch exposes allow_smaller_maxphyaddr to the user as a module parameter. Since smaller physical address spaces are only supported on VMX, the parameter is only exposed in the kvm_intel module. For now disable support by default, and let the user decide if they want to enable it. Modifications to VMX page fault and EPT violation handling will depend on whether that parameter is enabled. Signed-off-by: Mohammed Gamal <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2020-09-23MIPS: BCM47XX: Remove the needless check with the 1074KWei Li1-1/+1
As there is no known soc powered by mips 1074K in bcm47xx series, the check with 1074K is needless. So just remove it. Link: https://wireless.wiki.kernel.org/en/users/Drivers/b43/soc Fixes: 442e14a2c55e ("MIPS: Add 1074K CPU support explicitly.") Signed-off-by: Wei Li <[email protected]> Acked-by: Rafał Miłecki <[email protected]> Signed-off-by: Thomas Bogendoerfer <[email protected]>
2020-09-23MIPS: Add the missing 'CPU_1074K' into __get_cpu_type()Wei Li1-0/+1
Commit 442e14a2c55e ("MIPS: Add 1074K CPU support explicitly.") split 1074K from the 74K as an unique CPU type, while it missed to add the 'CPU_1074K' in __get_cpu_type(). So let's add it back. Fixes: 442e14a2c55e ("MIPS: Add 1074K CPU support explicitly.") Signed-off-by: Wei Li <[email protected]> Signed-off-by: Thomas Bogendoerfer <[email protected]>
2020-09-23MIPS: Loongson2ef: Disable Loongson MMI instructionsJiaxun Yang1-0/+4
It was missed when I was forking Loongson2ef from Loongson64 but should be applied to Loongson2ef as march=loongson2f will also enable Loongson MMI in GCC-9+. Signed-off-by: Jiaxun Yang <[email protected]> Fixes: 71e2f4dd5a65 ("MIPS: Fork loongson2ef from loongson64") Reported-by: Thomas Bogendoerfer <[email protected]> Cc: [email protected] # v5.8+ Signed-off-by: Thomas Bogendoerfer <[email protected]>
2020-09-23ACPI: processor: Fix build for ARCH_APICTIMER_STOPS_ON_C3 unsetRafael J. Wysocki1-0/+1
Fix the lapic_timer_needs_broadcast() stub for ARCH_APICTIMER_STOPS_ON_C3 unset to actually return a value. Fixes: aa6b43d57f99 ("ACPI: processor: Use CPUIDLE_FLAG_TIMER_STOP") Reported-by: Guenter Roeck <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]>
2020-09-23drm/i915/selftests: Push the fake iommu device from the stack to dataChris Wilson1-7/+5
Since we store a pointer to the fake iommu device that is allocated on the stack, as soon as we leave the function it goes out of scope and any future dereference is undefined behaviour. Just in case we may need to look at the fake iommu device after initialiation, move the allocation from the stack into the data. Fixes: 01b9d4e21148 ("iommu/vt-d: Use dev_iommu_priv_get/set()") Signed-off-by: Chris Wilson <[email protected]> Reviewed-by: Matthew Auld <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit 9f9f4101fc98db56714e71676d5a1e2d27e01f7e) Signed-off-by: Jani Nikula <[email protected]>
2020-09-23PM / devfreq: tegra30: Disable clock on error in probeDan Carpenter1-1/+3
This error path needs to call clk_disable_unprepare(). Fixes: 7296443b900e ("PM / devfreq: tegra30: Handle possible round-rate error") Signed-off-by: Dan Carpenter <[email protected]> Reviewed-by: Dmitry Osipenko <[email protected]> Signed-off-by: Dan Carpenter <[email protected]> Signed-off-by: Chanwoo Choi <[email protected]>
2020-09-23PM / devfreq: Add timer type to devfreq_summary debugfsChanwoo Choi1-3/+8
The commit 4dc3bab8687f ("PM / devfreq: Add support delayed timer for polling mode") supports the delayed timer but this commit missed the adding the timer type to devfreq_summary debugfs node. Add the timer type to devfreq_summary debugfs. Fixes: 4dc3bab8687f ("PM / devfreq: Add support delayed timer for polling mode") Signed-off-by: Chanwoo Choi <[email protected]>
2020-09-23Merge tag 'drm-misc-fixes-2020-09-18' of ↵Dave Airlie3-2/+3
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes drm-misc-fixes for v5.9-rc6: - Fill asoc card owner in vc4. - Program secondary CSC correctly in sun4i, and extend register mapping to cover secondary CSC registers. Signed-off-by: Dave Airlie <[email protected]> From: Maarten Lankhorst <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-09-22Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds3-15/+14
Pull vfs fixes from Al Viro: "No common topic, just assorted fixes" * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fuse: fix the ->direct_IO() treatment of iov_iter fs: fix cast in fsparam_u32hex() macro vboxsf: Fix the check for the old binary mount-arguments struct
2020-09-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds165-824/+1705
Pull networking fixes from Jakub Kicinski: - fix failure to add bond interfaces to a bridge, the offload-handling code was too defensive there and recent refactoring unearthed that. Users complained (Ido) - fix unnecessarily reflecting ECN bits within TOS values / QoS marking in TCP ACK and reset packets (Wei) - fix a deadlock with bpf iterator. Hopefully we're in the clear on this front now... (Yonghong) - BPF fix for clobbering r2 in bpf_gen_ld_abs (Daniel) - fix AQL on mt76 devices with FW rate control and add a couple of AQL issues in mac80211 code (Felix) - fix authentication issue with mwifiex (Maximilian) - WiFi connectivity fix: revert IGTK support in ti/wlcore (Mauro) - fix exception handling for multipath routes via same device (David Ahern) - revert back to a BH spin lock flavor for nsid_lock: there are paths which do require the BH context protection (Taehee) - fix interrupt / queue / NAPI handling in the lantiq driver (Hauke) - fix ife module load deadlock (Cong) - make an adjustment to netlink reply message type for code added in this release (the sole change touching uAPI here) (Michal) - a number of fixes for small NXP and Microchip switches (Vladimir) [ Pull request acked by David: "you can expect more of this in the future as I try to delegate more things to Jakub" ] * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (167 commits) net: mscc: ocelot: fix some key offsets for IP4_TCP_UDP VCAP IS2 entries net: dsa: seville: fix some key offsets for IP4_TCP_UDP VCAP IS2 entries net: dsa: felix: fix some key offsets for IP4_TCP_UDP VCAP IS2 entries inet_diag: validate INET_DIAG_REQ_PROTOCOL attribute net: bridge: br_vlan_get_pvid_rcu() should dereference the VLAN group under RCU net: Update MAINTAINERS for MediaTek switch driver net/mlx5e: mlx5e_fec_in_caps() returns a boolean net/mlx5e: kTLS, Avoid kzalloc(GFP_KERNEL) under spinlock net/mlx5e: kTLS, Fix leak on resync error flow net/mlx5e: kTLS, Add missing dma_unmap in RX resync net/mlx5e: kTLS, Fix napi sync and possible use-after-free net/mlx5e: TLS, Do not expose FPGA TLS counter if not supported net/mlx5e: Fix using wrong stats_grps in mlx5e_update_ndo_stats() net/mlx5e: Fix multicast counter not up-to-date in "ip -s" net/mlx5e: Fix endianness when calculating pedit mask first bit net/mlx5e: Enable adding peer miss rules only if merged eswitch is supported net/mlx5e: CT: Fix freeing ct_label mapping net/mlx5e: Fix memory leak of tunnel info when rule under multipath not ready net/mlx5e: Use synchronize_rcu to sync with NAPI net/mlx5e: Use RCU to protect rq->xdp_prog ...
2020-09-22Merge tag 'io_uring-5.9-2020-09-22' of git://git.kernel.dk/linux-blockLinus Torvalds2-13/+40
Pull io_uring fixes from Jens Axboe: "A few fixes - most of them regression fixes from this cycle, but also a few stable heading fixes, and a build fix for the included demo tool since some systems now actually have gettid() available" * tag 'io_uring-5.9-2020-09-22' of git://git.kernel.dk/linux-block: io_uring: fix openat/openat2 unified prep handling io_uring: mark statx/files_update/epoll_ctl as non-SQPOLL tools/io_uring: fix compile breakage io_uring: don't use retry based buffered reads for non-async bdev io_uring: don't re-setup vecs/iter in io_resumit_prep() is already there io_uring: don't run task work on an exiting task io_uring: drop 'ctx' ref on task work cancelation io_uring: grab any needed state during defer prep
2020-09-22Merge tag 'block-5.9-2020-09-22' of git://git.kernel.dk/linux-blockLinus Torvalds5-2/+28
Pull block fixes from Jens Axboe: "A few NVMe fixes, and a dasd write zero fix" * tag 'block-5.9-2020-09-22' of git://git.kernel.dk/linux-block: nvmet: get transport reference for passthru ctrl nvme-core: get/put ctrl and transport module in nvme_dev_open/release() nvme-tcp: fix kconfig dependency warning when !CRYPTO nvme-pci: disable the write zeros command for Intel 600P/P3100 s390/dasd: Fix zero write for FBA devices
2020-09-22x86/irq: Make run_on_irqstack_cond() typesafeThomas Gleixner6-12/+67
Sami reported that run_on_irqstack_cond() requires the caller to cast functions to mismatching types, which trips indirect call Control-Flow Integrity (CFI) in Clang. Instead of disabling CFI on that function, provide proper helpers for the three call variants. The actual ASM code stays the same as that is out of reach. [ bp: Fix __run_on_irqstack() prototype to match. ] Fixes: 931b94145981 ("x86/entry: Provide helpers for executing on the irqstack") Reported-by: Nathan Chancellor <[email protected]> Reported-by: Sami Tolvanen <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Signed-off-by: Borislav Petkov <[email protected]> Tested-by: Sami Tolvanen <[email protected]> Cc: <[email protected]> Link: https://github.com/ClangBuiltLinux/linux/issues/1052 Link: https://lkml.kernel.org/r/[email protected]
2020-09-22cpuidle: Drop misleading comments about RCU usageUlf Hansson1-10/+0
The commit 1098582a0f6c ("sched,idle,rcu: Push rcu_idle deeper into the idle path"), moved the calls rcu_idle_enter|exit() into the cpuidle core. However, it forgot to remove a couple of comments in enter_s2idle_proper() about why RCU_NONIDLE earlier was needed. So, let's drop them as they have become a bit misleading. Fixes: 1098582a0f6c ("sched,idle,rcu: Push rcu_idle deeper into the idle path") Signed-off-by: Ulf Hansson <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]>
2020-09-22dm crypt: document encrypted keyring key optionMilan Broz1-1/+1
Commit 27f5411a718c4 ("dm crypt: support using encrypted keys") introduced support for encrypted keyring type. Fix documentation in admin guide to mention this type. Fixes: 27f5411a718c4 ("dm crypt: support using encrypted keys") Signed-off-by: Milan Broz <[email protected]> Signed-off-by: Mike Snitzer <[email protected]>
2020-09-22Merge tag 'gvt-fixes-2020-09-17' of https://github.com/intel/gvt-linux into ↵Jani Nikula1-1/+5
drm-intel-fixes gvt-fixes-2020-09-17 - Fix kernel oops for VFIO edid on BDW (Zhenyu) Signed-off-by: Jani Nikula <[email protected]> From: Zhenyu Wang <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-09-22dm crypt: document new no_workqueue flagsMilan Broz1-0/+8
Commit 39d42fa96ba1 ("dm crypt: add flags to optionally bypass kcryptd workqueues") introduced new dm-crypt 'no_read_workqueue' and 'no_write_workqueue' flags. Add documentation to admin guide for them. Fixes: 39d42fa96ba1 ("dm crypt: add flags to optionally bypass kcryptd workqueues") Signed-off-by: Milan Broz <[email protected]> Signed-off-by: Mike Snitzer <[email protected]>
2020-09-22Merge tag 'trace-v5.9-rc5' of ↵Linus Torvalds7-29/+61
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fixes from Steven Rostedt: - Check kprobe is enabled before unregistering from ftrace as it isn't registered when disabled. - Remove kprobes enabled via command-line that is on init text when freed. - Add missing RCU synchronization for ftrace trampoline symbols removed from kallsyms. - Free trampoline on error path if ftrace_startup() fails. - Give more space for the longer PID numbers in trace output. - Fix a possible double free in the histogram code. - A couple of fixes that were discovered by sparse. * tag 'trace-v5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: bootconfig: init: make xbc_namebuf static kprobes: tracing/kprobes: Fix to kill kprobes on initmem after boot tracing: fix double free ftrace: Let ftrace_enable_sysctl take a kernel pointer buffer tracing: Make the space reserved for the pid wider ftrace: Fix missing synchronize_rcu() removing trampoline from kallsyms ftrace: Free the trampoline when ftrace_startup() fails kprobes: Fix to check probe enabled before disarm_kprobe_ftrace()
2020-09-22nvme-fc: fail new connections to a deleted host or remote portJames Smart1-2/+4
The lldd may have made calls to delete a remote port or local port and the delete is in progress when the cli then attempts to create a new controller. Currently, this proceeds without error although it can't be very successful. Fix this by validating that both the host port and remote port are present when a new controller is to be created. Signed-off-by: James Smart <[email protected]> Reviewed-by: Himanshu Madhani <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]>
2020-09-22nvme-pci: fix NULL req in completion handlerXianting Tian1-7/+7
Currently, we use nvmeq->q_depth as the upper limit for a valid tag in nvme_handle_cqe(), it is not correct. Because the available tag number is recorded in tagset, which is not equal to nvmeq->q_depth. The nvme driver registers interrupts for queues before initializing the tagset, because it uses the number of successful request_irq() calls to configure the tagset parameters. This allows a race condition with the current tag validity check if the controller happens to produce an interrupt with a corrupted CQE before the tagset is initialized. Replace the driver's indirect tag check with the one already provided by the block layer. Signed-off-by: Xianting Tian <[email protected]> Reviewed-by: Keith Busch <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]>
2020-09-22nvme: return errors for hwmon initKeith Busch3-12/+16
Initializing the nvme hwmon retrieves a log from the controller. If the controller is broken, we need to return the appropriate error so that subsequent initialization doesn't attempt to continue. Reported-by: Tong Zhang <[email protected]> Signed-off-by: Keith Busch <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]>
2020-09-22Revert "ALSA: usb-audio: Disable Lenovo P620 Rear line-in volume control"Kai-Heng Feng1-1/+0
This reverts commit 34dedd2a83b241ba6aeb290260313c65dc58660e. According to Realtek, volume FU works for line-in. I can confirm volume control works after device firmware is updated. Fixes: 34dedd2a83b2 ("ALSA: usb-audio: Disable Lenovo P620 Rear line-in volume control") Signed-off-by: Kai-Heng Feng <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2020-09-22btrfs: fix put of uninitialized kobject after seed device deleteAnand Jain1-6/+10
The following test case leads to NULL kobject free error: mount seed /mnt add sprout to /mnt umount /mnt mount sprout to /mnt delete seed kobject: '(null)' (00000000dd2b87e4): is not initialized, yet kobject_put() is being called. WARNING: CPU: 1 PID: 15784 at lib/kobject.c:736 kobject_put+0x80/0x350 RIP: 0010:kobject_put+0x80/0x350 :: Call Trace: btrfs_sysfs_remove_devices_dir+0x6e/0x160 [btrfs] btrfs_rm_device.cold+0xa8/0x298 [btrfs] btrfs_ioctl+0x206c/0x22a0 [btrfs] ksys_ioctl+0xe2/0x140 __x64_sys_ioctl+0x1e/0x29 do_syscall_64+0x96/0x150 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f4047c6288b :: This is because, at the end of the seed device-delete, we try to remove the seed's devid sysfs entry. But for the seed devices under the sprout fs, we don't initialize the devid kobject yet. So add a kobject state check, which takes care of the bug. Fixes: 668e48af7a94 ("btrfs: sysfs, add devid/dev_state kobject and device attributes") CC: [email protected] # 5.6+ Signed-off-by: Anand Jain <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]>
2020-09-22MIPS: Loongson-3: Fix fp register access if MSA enabledHuacai Chen1-16/+8
If MSA is enabled, FPU_REG_WIDTH is 128 rather than 64, then get_fpr64() /set_fpr64() in the original unaligned instruction emulation code access the wrong fp registers. This is because the current code doesn't specify the correct index field, so fix it. Fixes: f83e4f9896eff614d0f2547a ("MIPS: Loongson-3: Add some unaligned instructions emulation") Signed-off-by: Huacai Chen <[email protected]> Signed-off-by: Pei Huang <[email protected]> Signed-off-by: Thomas Bogendoerfer <[email protected]>
2020-09-22Merge remote-tracking branch 'origin/master' into drm-intel-fixesJani Nikula7-35/+46
Direct backmerge to get commit 88b67edd7247 ("dax: Fix compilation for CONFIG_DAX && !CONFIG_FS_DAX") to fix CI build issues. Acked-by: Daniel Vetter <[email protected]> Signed-off-by: Jani Nikula <[email protected]>
2020-09-22media: dt-bindings: media: imx274: Convert to json-schemaJacopo Mondi3-39/+77
Convert the imx274 bindings document to json-schema and update the MAINTAINERS file accordingly. Reviewed-by: Luca Ceresoli <[email protected]> Reviewed-by: Laurent Pinchart <[email protected]> Signed-off-by: Jacopo Mondi <[email protected]> Reviewed-by: Rob Herring <[email protected]> Signed-off-by: Sakari Ailus <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2020-09-21tools/bootconfig: Add testcase for tailing spaceMasami Hiramatsu1-0/+13
Add testcases for removing/keeping tailing space in the value. Link: https://lkml.kernel.org/r/160068151151.1088739.3469541807296024227.stgit@devnote2 Signed-off-by: Masami Hiramatsu <[email protected]> Signed-off-by: Steven Rostedt (VMware) <[email protected]>
2020-09-21tools/bootconfig: Add testcases for repeated key with braceMasami Hiramatsu1-0/+12
Add a testcase for repeated key with brace parsing issue. Link: https://lkml.kernel.org/r/160068150176.1088739.409481347784771987.stgit@devnote2 Signed-off-by: Masami Hiramatsu <[email protected]> Signed-off-by: Steven Rostedt (VMware) <[email protected]>
2020-09-21lib/bootconfig: Fix to remove tailing spaces after valueMasami Hiramatsu1-1/+1
Fix to remove tailing spaces after value. If there is a space after value, the bootconfig failed to remove it because it applies strim() before replacing the delimiter with null. For example, foo = var # comment was parsed as below. foo="var " but user will expect foo="var" This fixes it by applying strim() after removing the delimiter. Link: https://lkml.kernel.org/r/160068149134.1088739.8868306567670058853.stgit@devnote2 Fixes: 76db5a27a827 ("bootconfig: Add Extra Boot Config support") Cc: Ingo Molnar <[email protected]> Cc: [email protected] Signed-off-by: Masami Hiramatsu <[email protected]> Signed-off-by: Steven Rostedt (VMware) <[email protected]>
2020-09-21lib/bootconfig: Fix a bug of breaking existing tree nodesMasami Hiramatsu1-13/+23
Fix a bug of breaking existing tree nodes by parsing the second and subsequent braces. Since the bootconfig parser uses the node.next field as a flag of current parent node, but this will break the existing tree if the same key node is specified again in the bootconfig. For example, the following bootconfig should be foo.buz and bar. foo bar foo { buz } However, when parsing the brace "{", it breaks foo->bar link by marking open-brace node. So the bootconfig unlinks bar from the bootconfig internal tree. This introduces a stack outside of the tree and record the last open-brace on the stack instead of using node.next field. Link: https://lkml.kernel.org/r/160068148267.1088739.8264704338030168660.stgit@devnote2 Fixes: 76db5a27a827 ("bootconfig: Add Extra Boot Config support") Cc: Ingo Molnar <[email protected]> Cc: [email protected] Signed-off-by: Masami Hiramatsu <[email protected]> Signed-off-by: Steven Rostedt (VMware) <[email protected]>
2020-09-21Merge branch 'Fix-broken-tc-flower-rules-for-mscc_ocelot-switches'David S. Miller3-24/+24
Vladimir Oltean says: ==================== Fix broken tc-flower rules for mscc_ocelot switches All 3 switch drivers from the Ocelot family have the same bug in the VCAP IS2 key offsets, which is that some keys are in the incorrect order. ==================== Signed-off-by: David S. Miller <[email protected]>
2020-09-21net: mscc: ocelot: fix some key offsets for IP4_TCP_UDP VCAP IS2 entriesVladimir Oltean1-8/+8
The IS2 IP4_TCP_UDP key offsets do not correspond to the VSC7514 datasheet. Whether they work or not is unknown to me. On VSC9959 and VSC9953, with the same mistake and same discrepancy from the documentation, tc-flower src_port and dst_port rules did not work, so I am assuming the same is true here. Signed-off-by: Vladimir Oltean <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-09-21net: dsa: seville: fix some key offsets for IP4_TCP_UDP VCAP IS2 entriesVladimir Oltean1-8/+8
Since these were copied from the Felix VCAP IS2 code, and only the offsets were adjusted, the order of the bit fields is still wrong. Fix it. Signed-off-by: Vladimir Oltean <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.