aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2024-07-11selftests/resctrl: Simplify bandwidth report type handlingIlpo Järvinen5-25/+20
bw_report is only needed for selecting the correct value from the values IMC measured. It is a member in the resctrl_val_param struct and is always set to "reads". The value is then checked in resctrl_val() using validate_bw_report_request() that besides validating the input, assumes it can mutate the string which is questionable programming practice. Simplify handling bw_report: - Convert validate_bw_report_request() into get_bw_report_type() that inputs and returns const char *. Use NULL to indicate error. - Validate the report types inside measure_mem_bw(), not in resctrl_val(). - Pass bw_report to measure_mem_bw() from ->measure() hook because resctrl_val() no longer needs bw_report for anything. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Tested-by: Babu Moger <babu.moger@amd.com> Reviewed-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2024-07-11selftests/resctrl: Add ->init() callback into resctrl_val_paramIlpo Järvinen5-63/+60
The struct resctrl_val_param is there to customize behavior inside resctrl_val() which is currently not used to full extent and there are number of strcmp()s for test name in resctrl_val done by resctrl_val(). Create ->init() hook into the struct resctrl_val_param to cleanly do per test initialization. Remove also unused branches to setup paths and the related #defines for CMT test. While touching kerneldoc, make the adjacent line consistent with the newly added form (callback vs call back). Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Tested-by: Babu Moger <babu.moger@amd.com> Reviewed-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2024-07-11selftests/resctrl: Add ->measure() callback to resctrl_val_paramIlpo Järvinen5-15/+35
The measurement done in resctrl_val() varies depending on test type. The decision for how to measure is decided based on the string compare to test name which is quite inflexible. Add ->measure() callback into the struct resctrl_val_param to allow each test to provide necessary code as a function which simplifies what resctrl_val() has to do. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Tested-by: Babu Moger <babu.moger@amd.com> Reviewed-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2024-07-11selftests/resctrl: Simplify mem bandwidth file code for MBA & MBM testsIlpo Järvinen2-42/+4
initialize_mem_bw_resctrl() and set_mbm_path() contain complicated set of conditions, each yielding different file to be opened to measure memory bandwidth through resctrl FS. In practice, only two of them are used. For MBA test, ctrlgrp is always provided, and for MBM test both ctrlgrp and mongrp are set. The file used differ between MBA/MBM test, however, MBM test unnecessarily create monitor group because resctrl FS already provides monitoring interface underneath any ctrlgrp too, which is what the MBA selftest uses. Consolidate memory bandwidth file used to the one used by the MBA selftest. Remove all unused branches opening other files to simplify the code. Suggested-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Tested-by: Babu Moger <babu.moger@amd.com> Reviewed-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2024-07-11selftests/resctrl: Rename measure_vals() to measure_mem_bw_vals() & documentIlpo Järvinen1-3/+8
measure_vals() is awfully generic name so rename it to measure_mem_bw() to describe better what it does and document the function parameters. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Tested-by: Babu Moger <babu.moger@amd.com> Reviewed-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2024-07-11selftests/resctrl: Cleanup bm_pid and ppid usage & limit scopeIlpo Järvinen2-17/+15
'bm_pid' and 'ppid' are global variables. As they are used by different processes and in signal handler, they cannot be entirely converted into local variables. The scope of those variables can still be reduced into resctrl_val.c only. As PARENT_EXIT() macro is using 'ppid', make it a function in resctrl_val.c and pass ppid to it as an argument because it is easier to understand than using the global variable directly. Pass 'bm_pid' into measure_vals() instead of relying on the global variable which helps to make the call signatures of measure_vals() and measure_llc_resctrl() more similar to each other. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Tested-by: Babu Moger <babu.moger@amd.com> Reviewed-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2024-07-11selftests/resctrl: Use correct type for pidsIlpo Järvinen4-12/+12
A few functions receive PIDs through int arguments. PIDs variables should be of type pid_t, not int. Convert pid arguments from int to pid_t. Before printing PID, match the type to %d by casting to int which is enough for Linux (standard would allow using a longer integer type but generalizing for that would complicate the code unnecessarily, the selftest code does not need to be portable). Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Tested-by: Babu Moger <babu.moger@amd.com> Reviewed-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2024-07-11selftests/resctrl: Consolidate get_domain_id() into resctrl_val()Ilpo Järvinen1-20/+13
Both initialize_mem_bw_resctrl() and initialize_llc_occu_resctrl() that are called from resctrl_val() need to determine domain ID to construct resctrl fs related paths. Both functions do it by taking CPU ID which neither needs for any other purpose than determining the domain ID. Consolidate determining the domain ID into resctrl_val() and pass the domain ID instead of CPU ID to initialize_mem_bw_resctrl() and initialize_llc_occu_resctrl(). Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Tested-by: Babu Moger <babu.moger@amd.com> Reviewed-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2024-07-11selftests/resctrl: Make "bandwidth" consistent in comments & printsIlpo Järvinen2-8/+8
Resctrl selftests refer to "bandwidth" currently in two other forms in the code ("B/W" and "band width"). Use "bandwidth" consistently everywhere. While at it, fix also one "over flow" -> "overflow" on a line that is touched by the change. Suggested-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Tested-by: Babu Moger <babu.moger@amd.com> Reviewed-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2024-07-11selftests/resctrl: Calculate resctrl FS derived mem bw over sleep(1) onlyIlpo Järvinen1-50/+91
For MBM/MBA tests, measure_vals() calls get_mem_bw_imc() that performs the measurement over a duration of sleep(1) call. The memory bandwidth numbers from IMC are derived over this duration. The resctrl FS derived memory bandwidth, however, is calculated inside measure_vals() and only takes delta between the previous value and the current one which besides the actual test, also samples inter-test noise. Rework the logic in measure_vals() and get_mem_bw_imc() such that the resctrl FS memory bandwidth section covers much shorter duration closely matching that of the IMC perf counters to improve measurement accuracy. For the second read after rewind() to return a fresh value, also newline has to be consumed by the fscanf(). Suggested-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Tested-by: Babu Moger <babu.moger@amd.com> Reviewed-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2024-07-11selftests/resctrl: Fix closing IMC fds on error and open-code R+W instead of ↵Ilpo Järvinen1-18/+36
loops The imc perf fd close() calls are missing from all error paths. In addition, get_mem_bw_imc() handles fds in a for loop but close() is based on two fixed indexes READ and WRITE. Open code inner for loops to READ+WRITE entries for clarity and add a function to close() IMC fds properly in all cases. Fixes: 7f4d257e3a2a ("selftests/resctrl: Add callback to start a benchmark") Suggested-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Tested-by: Babu Moger <babu.moger@amd.com> Reviewed-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2024-07-11selftests/sched: fix code format issuesaigourensheng1-5/+5
There are extra spaces in the middle of #define. It is recommended to delete the spaces to make the code look more comfortable. Signed-off-by: aigourensheng <shechenglong001@gmail.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2024-07-11selftests/lib.mk: silence some clang warnings that gcc already ignoresJohn Hubbard1-0/+8
gcc defaults to silence (off) for the following warnings, but clang defaults to the opposite. The warnings are not useful for the kernel itself, which is why they have remained disabled in gcc for the main kernel build. And it is only due to including kernel data structures in the selftests, that we get the warnings from clang. -Waddress-of-packed-member -Wgnu-variable-sized-type-not-at-end In other words, the warnings are not unique to the selftests: there is nothing that the selftests' code does that triggers these warnings, other than the act of including the kernel's data structures. Therefore, silence them for the clang builds as well. This eliminates warnings for the net/ and user_events/ kselftest subsystems, in these files: ./net/af_unix/scm_rights.c ./net/timestamping.c ./net/ipsec.c ./user_events/perf_test.c Cc: Nathan Chancellor <nathan@kernel.org> Signed-off-by: John Hubbard <jhubbard@nvidia.com> Acked-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2024-07-07Linux 6.10-rc7Linus Torvalds1-1/+1
2024-07-07Merge tag 'clk-fixes-for-linus' of ↵Linus Torvalds8-27/+43
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fixes from Stephen Boyd: "A set of clk fixes for the Qualcomm, Mediatek, and Allwinner drivers: - Fix the Qualcomm Stromer Plus PLL set_rate() clk_op to explicitly set the alpha enable bit and not set bits that don't exist - Mark Qualcomm IPQ9574 crypto clks as voted to avoid stuck clk warnings - Fix the parent of some PLLs on Qualcomm sm6530 so their rate is correct - Fix the min/max rate clamping logic in the Allwinner driver that got broken in v6.9 - Limit runtime PM enabling in the Mediatek driver to only mt8183-mfgcfg so that system wide resume doesn't break on other Mediatek SoCs" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: mediatek: mt8183: Only enable runtime PM on mt8183-mfgcfg clk: sunxi-ng: common: Don't call hw_to_ccu_common on hw without common clk: qcom: gcc-ipq9574: Add BRANCH_HALT_VOTED flag clk: qcom: apss-ipq-pll: remove 'config_ctl_hi_val' from Stromer pll configs clk: qcom: clk-alpha-pll: set ALPHA_EN bit for Stromer Plus PLLs clk: qcom: gcc-sm6350: Fix gpll6* & gpll7 parents
2024-07-06Merge tag 'powerpc-6.10-4' of ↵Linus Torvalds7-20/+22
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - Fix unnecessary copy to 0 when kernel is booted at address 0 - Fix usercopy crash when dumping dtl via debugfs - Avoid possible crash when PCI hotplug races with error handling - Fix kexec crash caused by scv being disabled before other CPUs call-in - Fix powerpc selftests build with USERCFLAGS set Thanks to Anjali K, Ganesh Goudar, Gautam Menghani, Jinglin Wen, Nicholas Piggin, Sourabh Jain, Srikar Dronamraju, and Vishal Chourasia. * tag 'powerpc-6.10-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: selftests/powerpc: Fix build with USERCFLAGS set powerpc/pseries: Fix scv instruction crash with kexec powerpc/eeh: avoid possible crash when edev->pdev changes powerpc/pseries: Whitelist dtl slub object for copying to userspace powerpc/64s: Fix unnecessary copy to 0 when kernel is booted at address 0
2024-07-06Merge tag '6.10-rc6-smb3-client-fix' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds1-30/+0
Pull smb client fix from Steve French: "Fix for smb3 readahead performance regression" * tag '6.10-rc6-smb3-client-fix' of git://git.samba.org/sfrench/cifs-2.6: cifs: Fix read-performance regression by dropping readahead expansion
2024-07-06Merge tag 'i2c-for-6.10-rc7' of ↵Linus Torvalds1-38/+10
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fix from Wolfram Sang: "An i2c driver fix" * tag 'i2c-for-6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: pnx: Fix potential deadlock warning from del_timer_sync() call in isr
2024-07-06selftests/powerpc: Fix build with USERCFLAGS setMichael Ellerman1-4/+1
Currently building the powerpc selftests with USERCFLAGS set to anything causes the build to break: $ make -C tools/testing/selftests/powerpc V=1 USERCFLAGS=-Wno-error ... gcc -Wno-error cache_shape.c ... cache_shape.c:18:10: fatal error: utils.h: No such file or directory 18 | #include "utils.h" | ^~~~~~~~~ compilation terminated. This happens because the USERCFLAGS are added to CFLAGS in lib.mk, which causes the check of CFLAGS in powerpc/flags.mk to skip setting CFLAGS at all, resulting in none of the usual CFLAGS being passed. That can be seen in the output above, the only flag passed to the compiler is -Wno-error. Fix it by dropping the conditional setting of CFLAGS in flags.mk. Instead always set CFLAGS, but also append USERCFLAGS if they are set. Note that appending to CFLAGS (with +=) wouldn't work, because flags.mk is included by multiple Makefiles (to support partial builds), causing CFLAGS to be appended to multiple times. Additionally that would place the USERCFLAGS prior to the standard CFLAGS, meaning the USERCFLAGS couldn't override the standard flags. Being able to override the standard flags is desirable, for example for adding -Wno-error. With the fix in place, the CFLAGS are set correctly, including the USERCFLAGS: $ make -C tools/testing/selftests/powerpc V=1 USERCFLAGS=-Wno-error ... gcc -std=gnu99 -O2 -Wall -Werror -DGIT_VERSION='"v6.10-rc2-7-gdea17e7e56c3"' -I/home/michael/linux/tools/testing/selftests/powerpc/include -Wno-error cache_shape.c ... Fixes: 5553a79387e9 ("selftests/powerpc: Add flags.mk to support pmu buildable") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20240706120833.909853-1-mpe@ellerman.id.au
2024-07-05Merge tag 'integrity-v6.10-fix' of ↵Linus Torvalds1-2/+1
ssh://ra.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity Pull integrity fix from Mimi Zohar: "A single bug fix to properly remove all of the securityfs IMA measurement lists" * tag 'integrity-v6.10-fix' of ssh://ra.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity: ima: fix wrong zero-assignment during securityfs dentry remove
2024-07-05Merge tag 'pci-v6.10-fixes-2' of ↵Linus Torvalds2-3/+4
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci Pull pci update from Bjorn Helgaas: - Update MAINTAINERS and CREDITS to credit Gustavo Pimentel with the Synopsys DesignWare eDMA driver and reflect that he is no longer at Synopsys and isn't in a position to maintain the DesignWare xData traffic generator (Bjorn Helgaas) * tag 'pci-v6.10-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: CREDITS: Add Synopsys DesignWare eDMA driver for Gustavo Pimentel MAINTAINERS: Orphan Synopsys DesignWare xData traffic generator
2024-07-05Merge tag 'riscv-for-linus-6.10-rc7' of ↵Linus Torvalds7-18/+49
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V fixes from Palmer Dabbelt: - A fix for the CMODX example in the recently added icache flushing prctl() - A fix to the perf driver to avoid corrupting event data on counter overflows when external overflow handlers are in use - A fix to clear all hardware performance monitor events on boot, to avoid dangling events firmware or previously booted kernels from triggering spuriously - A fix to the perf event probing logic to avoid erroneously reporting the presence of unimplemented counters. This also prevents some implemented counters from being reported - A build fix for the vector sigreturn selftest on clang - A fix to ftrace, which now requires the previously optional index argument to ftrace_graph_ret_addr() - A fix to avoid deadlocking if kexec crash handling triggers in an interrupt context * tag 'riscv-for-linus-6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: kexec: Avoid deadlock in kexec crash path riscv: stacktrace: fix usage of ftrace_graph_ret_addr() riscv: selftests: Fix vsetivli args for clang perf: RISC-V: Check standard event availability drivers/perf: riscv: Reset the counter to hpmevent mapping while starting cpus drivers/perf: riscv: Do not update the event data if uptodate documentation: Fix riscv cmodx example
2024-07-05Merge tag 'drm-fixes-2024-07-05' of https://gitlab.freedesktop.org/drm/kernelLinus Torvalds17-31/+132
Pull drm fixes from Daniel Vetter: "Just small fixes all over here, all quiet as it should. drivers: - amd: mostly amdgpu display fixes + radeon vm NULL deref fix - xe: migration error handling + typoed register name in gt setup - i915: usb-c fix to shut up warnings on MTL+ - panthor: fix sync-only jobs + ioctl validation fix to not EINVAL wrongly - panel quirks - nouveau: NULL deref in get_modes drm core: - fbdev big endian fix for the dma memory backed variant drivers/firmware: - fix sysfb refcounting" * tag 'drm-fixes-2024-07-05' of https://gitlab.freedesktop.org/drm/kernel: drm/xe/mcr: Avoid clobbering DSS steering drm/xe: fix error handling in xe_migrate_update_pgtables drm/ttm: Always take the bo delayed cleanup path for imported bos drm/fbdev-generic: Fix framebuffer on big endian devices drm/panthor: Fix sync-only jobs drm/panthor: Don't check the array stride on empty uobj arrays drm/amdgpu/atomfirmware: silence UBSAN warning drm/radeon: check bo_va->bo is non-NULL before using it drm/amd/display: Fix array-index-out-of-bounds in dml2/FCLKChangeSupport drm/amd/display: Update efficiency bandwidth for dcn351 drm/amd/display: Fix refresh rate range for some panel drm/amd/display: Account for cursor prefetch BW in DML1 mode support drm/amd/display: Add refresh rate range check drm/amd/display: Reset freesync config before update new state drm: panel-orientation-quirks: Add labels for both Valve Steam Deck revisions drm: panel-orientation-quirks: Add quirk for Valve Galileo drm/i915/display: For MTL+ platforms skip mg dp programming drm/nouveau: fix null pointer dereference in nouveau_connector_get_modes firmware: sysfb: Fix reference count of sysfb parent device
2024-07-05Merge tag 'gpio-fixes-for-v6.10-rc7' of ↵Linus Torvalds2-4/+20
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull gpio fixes from Bartosz Golaszewski: "Two OF lookup quirks and one fix for an issue in the generic gpio-mmio driver: - add two OF lookup quirks for TSC2005 and MIPS Lantiq - don't try to figure out bgpio_bits from the 'ngpios' property in gpio-mmio" * tag 'gpio-fixes-for-v6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: gpiolib: of: add polarity quirk for TSC2005 gpio: mmio: do not calculate bgpio_bits via "ngpios" gpiolib: of: fix lookup quirk for MIPS Lantiq
2024-07-05Merge tag 'tpmdd-next-6.10-rc7' of ↵Linus Torvalds3-233/+269
git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd Pull TPM fixes from Jarkko Sakkinen: "This contains the fixes for !chip->auth condition, preventing the breakage of: - tpm_ftpm_tee.c - tpm_i2c_nuvoton.c - tpm_ibmvtpm.c - tpm_tis_i2c_cr50.c - tpm_vtpm_proxy.c All drivers will continue to work as they did in 6.9, except a single warning (dev_warn() not WARN()) is printed to klog only to inform that authenticated sessions are not enabled" * tag 'tpmdd-next-6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd: tpm: Address !chip->auth in tpm_buf_append_hmac_session*() tpm: Address !chip->auth in tpm_buf_append_name() tpm: Address !chip->auth in tpm2_*_auth_session()
2024-07-05Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds4-0/+49
Pull kvm fix from Paolo Bonzini: - s390: fix support for z16 systems * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: s390: fix LPSWEY handling
2024-07-05Merge tag 'i2c-host-fixes-6.10-rc7' of ↵Wolfram Sang1-38/+10
git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-current This tag includes a nice fix in the PNX driver that has been pending for a long time. Piotr has replaced a potential lock in the interrupt context with a more efficient and straightforward handling of the timeout signaling.
2024-07-05Merge tag 'amd-drm-fixes-6.10-2024-07-03' of ↵Daniel Vetter6-4/+59
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-6.10-2024-07-03: amdgpu: - Freesync fixes - DML1 bandwidth fix - DCN 3.5 fixes - DML2 fix - Silence an UBSAN warning radeon: - GPUVM fix Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240703184723.1981997-1-alexander.deucher@amd.com
2024-07-05gpiolib: of: add polarity quirk for TSC2005Dmitry Torokhov1-0/+8
DTS for Nokia N900 incorrectly specifies "active high" polarity for the reset line, while the chip documentation actually specifies it as "active low". In the past the driver fudged gpiod API and inverted the logic internally, but it was changed in d0d89493bff8. Fixes: d0d89493bff8 ("Input: tsc2004/5 - switch to using generic device properties") Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/ZoWXwYtwgJIxi-hD@google.com Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2024-07-05Merge tag 'kvm-s390-master-6.10-1' of ↵Paolo Bonzini4-0/+49
git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD KVM: s390: Fix z16 support The z16 support might fail with the lpswey instruction. Provide a handler.
2024-07-05tpm: Address !chip->auth in tpm_buf_append_hmac_session*()Jarkko Sakkinen2-124/+130
Unless tpm_chip_bootstrap() was called by the driver, !chip->auth can cause a null derefence in tpm_buf_hmac_session*(). Thus, address !chip->auth in tpm_buf_hmac_session*() and remove the fallback implementation for !TCG_TPM2_HMAC. Cc: stable@vger.kernel.org # v6.9+ Reported-by: Stefan Berger <stefanb@linux.ibm.com> Closes: https://lore.kernel.org/linux-integrity/20240617193408.1234365-1-stefanb@linux.ibm.com/ Fixes: 1085b8276bb4 ("tpm: Add the rest of the session HMAC API") Tested-by: Michael Ellerman <mpe@ellerman.id.au> # ppc Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2024-07-05tpm: Address !chip->auth in tpm_buf_append_name()Jarkko Sakkinen3-111/+131
Unless tpm_chip_bootstrap() was called by the driver, !chip->auth can cause a null derefence in tpm_buf_append_name(). Thus, address !chip->auth in tpm_buf_append_name() and remove the fallback implementation for !TCG_TPM2_HMAC. Cc: stable@vger.kernel.org # v6.10+ Reported-by: Stefan Berger <stefanb@linux.ibm.com> Closes: https://lore.kernel.org/linux-integrity/20240617193408.1234365-1-stefanb@linux.ibm.com/ Fixes: d0a25bb961e6 ("tpm: Add HMAC session name/handle append") Tested-by: Michael Ellerman <mpe@ellerman.id.au> # ppc Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2024-07-05tpm: Address !chip->auth in tpm2_*_auth_session()Jarkko Sakkinen1-2/+12
Unless tpm_chip_bootstrap() was called by the driver, !chip->auth can cause a null derefence in tpm2_*_auth_session(). Thus, address !chip->auth in tpm2_*_auth_session(). Cc: stable@vger.kernel.org # v6.9+ Reported-by: Stefan Berger <stefanb@linux.ibm.com> Closes: https://lore.kernel.org/linux-integrity/20240617193408.1234365-1-stefanb@linux.ibm.com/ Fixes: 699e3efd6c64 ("tpm: Add HMAC session start and end functions") Tested-by: Michael Ellerman <mpe@ellerman.id.au> # ppc Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2024-07-04Merge tag 'for-6.10-rc6-tag' of ↵Linus Torvalds5-9/+38
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: - fix folio refcounting when releasing them (encoded write, dummy extent buffer) - fix out of bounds read when checking qgroup inherit data - fix how configurable chunk size is handled in zoned mode - in the ref-verify tool, fix uninitialized return value when checking extent owner ref and simple quota are not enabled * tag 'for-6.10-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: fix folio refcount in __alloc_dummy_extent_buffer() btrfs: fix folio refcount in btrfs_do_encoded_write() btrfs: fix uninitialized return value in the ref-verify tool btrfs: always do the basic checks for btrfs_qgroup_inherit structure btrfs: zoned: fix calc_available_free_space() for zoned mode
2024-07-04Merge tag 'net-6.10-rc7' of ↵Linus Torvalds67-378/+630
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from bluetooth, wireless and netfilter. There's one fix for power management with Intel's e1000e here, Thorsten tells us there's another problem that started in v6.9. We're trying to wrap that up but I don't think it's blocking. Current release - new code bugs: - wifi: mac80211: disable softirqs for queued frame handling - af_unix: fix uninit-value in __unix_walk_scc(), with the new garbage collection algo Previous releases - regressions: - Bluetooth: - qca: fix BT enable failure for QCA6390 after warm reboot - add quirk to ignore reserved PHY bits in LE Extended Adv Report, abused by some Broadcom controllers found on Apple machines - wifi: wilc1000: fix ies_len type in connect path Previous releases - always broken: - tcp: fix DSACK undo in fast recovery to call tcp_try_to_open(), avoid premature timeouts - net: make sure skb_datagram_iter maps fragments page by page, in case we somehow get compound highmem mixed in - eth: bnx2x: fix multiple UBSAN array-index-out-of-bounds when more queues are used Misc: - MAINTAINERS: Remembering Larry Finger" * tag 'net-6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (62 commits) bnxt_en: Fix the resource check condition for RSS contexts mlxsw: core_linecards: Fix double memory deallocation in case of invalid INI file inet_diag: Initialize pad field in struct inet_diag_req_v2 tcp: Don't flag tcp_sk(sk)->rx_opt.saw_unknown for TCP AO. selftests: make order checking verbose in msg_zerocopy selftest selftests: fix OOM in msg_zerocopy selftest ice: use proper macro for testing bit ice: Reject pin requests with unsupported flags ice: Don't process extts if PTP is disabled ice: Fix improper extts handling selftest: af_unix: Add test case for backtrack after finalising SCC. af_unix: Fix uninit-value in __unix_walk_scc() bonding: Fix out-of-bounds read in bond_option_arp_ip_targets_set() net: rswitch: Avoid use-after-free in rswitch_poll() netfilter: nf_tables: unconditionally flush pending work before notifier wifi: iwlwifi: mvm: check vif for NULL/ERR_PTR before dereference wifi: iwlwifi: mvm: avoid link lookup in statistics wifi: iwlwifi: mvm: don't wake up rx_sync_waitq upon RFKILL wifi: iwlwifi: properly set WIPHY_FLAG_SUPPORTS_EXT_KEK_KCK wifi: wilc1000: fix ies_len type in connect path ...
2024-07-04Merge tag 's390-6.10-8' of ↵Linus Torvalds5-13/+12
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Heiko Carstens: - Fix and add physical to virtual address translations in dasd and virtio_ccw drivers. For virtio_ccw this is just a minimal fix. More code cleanup will follow. - Small defconfig updates * tag 's390-6.10-8' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/dasd: Fix invalid dereferencing of indirect CCW data pointer s390/vfio_ccw: Fix target addresses of TIC CCWs s390: Update defconfigs
2024-07-04Merge tag 'platform-drivers-x86-v6.10-5' of ↵Linus Torvalds1-13/+18
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver fix from Hans de Goede: - Fix regression in toshiba_acpi introduced in 6.10-rc1 * tag 'platform-drivers-x86-v6.10-5' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: platform/x86: toshiba_acpi: Fix quickstart quirk handling
2024-07-04Merge tag 'kselftest-fix-2024-07-04' of ↵Linus Torvalds1-19/+24
git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux Pull Kselftest fix from Mickaël Salaün: "Fix Kselftests timeout. We can't use CLONE_VFORK, since that blocks the parent - and thus the timeout handling - until the child exits or execve's. Go back to using plain fork()" * tag 'kselftest-fix-2024-07-04' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux: selftests/harness: Fix tests timeout and race condition
2024-07-04Merge tag 'mm-hotfixes-stable-2024-07-03-22-23' of ↵Linus Torvalds10-20/+70
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull misc fixes from, Andrew Morton: "6 hotfies, all cc:stable. Some fixes for longstanding nilfs2 issues and three unrelated MM fixes" * tag 'mm-hotfixes-stable-2024-07-03-22-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: nilfs2: fix incorrect inode allocation from reserved inodes nilfs2: add missing check for inode numbers on directory entries nilfs2: fix inode number range checks mm: avoid overflows in dirty throttling logic Revert "mm/writeback: fix possible divide-by-zero in wb_dirty_limits(), again" mm: optimize the redundant loop of mm_update_owner_next()
2024-07-04Merge tag 'drm-misc-fixes-2024-07-04' of ↵Daniel Vetter8-20/+63
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes drm-misc-fixes for v6.10-rc7: - Add panel quirks. - Firmware sysfb refcount fix. - Another null pointer mode deref fix for nouveau. - Panthor sync and uobj fixes. - Fix fbdev regression since v6.7. - Delay free imported bo in ttm to fix lockdep splat. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/ffba0c63-2798-40b6-948d-361cd3b14e9f@linux.intel.com
2024-07-04Merge tag 'drm-xe-fixes-2024-07-04' of ↵Daniel Vetter2-7/+7
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes Driver Changes: - One copy/paste mistake fix. - One error path fix causing an error pointer dereference. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/ZoZ-wD66lgjiNh72@fedora
2024-07-04bnxt_en: Fix the resource check condition for RSS contextsPavan Chebbi1-1/+5
While creating a new RSS context, bnxt_rfs_capable() currently makes a strict check to see if the required VNICs are already available. If the current VNICs are not what is required, either too many or not enough, it will call the firmware to reserve the exact number required. There is a bug in the firmware when the driver tries to relinquish some reserved VNICs and RSS contexts. It will cause the default VNIC to lose its RSS configuration and cause receive packets to be placed incorrectly. Workaround this problem by skipping the resource reduction. The driver will not reduce the VNIC and RSS context reservations when a context is deleted. The resources will be available for use when new contexts are created later. Potentially, this workaround can cause us to run out of VNIC and RSS contexts if there are a lot of VF functions creating and deleting RSS contexts. In the future, we will conditionally disable this workaround when the firmware fix is available. Fixes: 438ba39b25fe ("bnxt_en: Improve RSS context reservation infrastructure") Reported-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/netdev/20240625010210.2002310-1-kuba@kernel.org/ Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com> Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20240703180112.78590-1-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-04mlxsw: core_linecards: Fix double memory deallocation in case of invalid INI ↵Aleksandr Mishin1-0/+1
file In case of invalid INI file mlxsw_linecard_types_init() deallocates memory but doesn't reset pointer to NULL and returns 0. In case of any error occurred after mlxsw_linecard_types_init() call, mlxsw_linecards_init() calls mlxsw_linecard_types_fini() which performs memory deallocation again. Add pointer reset to NULL. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: b217127e5e4e ("mlxsw: core_linecards: Add line card objects and implement provisioning") Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Michal Kubiak <michal.kubiak@intel.com> Link: https://patch.msgid.link/20240703203251.8871-1-amishin@t-argos.ru Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-04Merge tag 'wireless-2024-07-04' of ↵Jakub Kicinski5-22/+20
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless Kalle Valo says: ==================== wireless fixes for v6.10 Hopefully the last fixes for v6.10. Fix a regression in wilc1000 where bitrate Information Elements longer than 255 bytes were broken. Few fixes also to mac80211 and iwlwifi. * tag 'wireless-2024-07-04' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: wifi: iwlwifi: mvm: check vif for NULL/ERR_PTR before dereference wifi: iwlwifi: mvm: avoid link lookup in statistics wifi: iwlwifi: mvm: don't wake up rx_sync_waitq upon RFKILL wifi: iwlwifi: properly set WIPHY_FLAG_SUPPORTS_EXT_KEK_KCK wifi: wilc1000: fix ies_len type in connect path wifi: mac80211: fix BSS_CHANGED_UNSOL_BCAST_PROBE_RESP ==================== Link: https://patch.msgid.link/20240704111431.11DEDC3277B@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-04Merge tag 'drm-intel-fixes-2024-07-02' of ↵Daniel Vetter1-0/+3
https://gitlab.freedesktop.org/drm/i915/kernel into drm-fixes drm/i915 fixes for v6.10-rc7: - Skip unnecessary MG programming, avoiding warnings (Imre) Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/87frss9ozs.fsf@intel.com
2024-07-04Merge tag 'nf-24-07-04' of ↵Paolo Abeni1-2/+1
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following batch contains a oneliner patch to inconditionally flush workqueue containing stale objects to be released, syzbot managed to trigger UaF. Patch from Florian Westphal. netfilter pull request 24-07-04 * tag 'nf-24-07-04' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: nf_tables: unconditionally flush pending work before notifier ==================== Link: https://patch.msgid.link/20240703223304.1455-1-pablo@netfilter.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-07-04inet_diag: Initialize pad field in struct inet_diag_req_v2Shigeru Yoshida1-0/+2
KMSAN reported uninit-value access in raw_lookup() [1]. Diag for raw sockets uses the pad field in struct inet_diag_req_v2 for the underlying protocol. This field corresponds to the sdiag_raw_protocol field in struct inet_diag_req_raw. inet_diag_get_exact_compat() converts inet_diag_req to inet_diag_req_v2, but leaves the pad field uninitialized. So the issue occurs when raw_lookup() accesses the sdiag_raw_protocol field. Fix this by initializing the pad field in inet_diag_get_exact_compat(). Also, do the same fix in inet_diag_dump_compat() to avoid the similar issue in the future. [1] BUG: KMSAN: uninit-value in raw_lookup net/ipv4/raw_diag.c:49 [inline] BUG: KMSAN: uninit-value in raw_sock_get+0x657/0x800 net/ipv4/raw_diag.c:71 raw_lookup net/ipv4/raw_diag.c:49 [inline] raw_sock_get+0x657/0x800 net/ipv4/raw_diag.c:71 raw_diag_dump_one+0xa1/0x660 net/ipv4/raw_diag.c:99 inet_diag_cmd_exact+0x7d9/0x980 inet_diag_get_exact_compat net/ipv4/inet_diag.c:1404 [inline] inet_diag_rcv_msg_compat+0x469/0x530 net/ipv4/inet_diag.c:1426 sock_diag_rcv_msg+0x23d/0x740 net/core/sock_diag.c:282 netlink_rcv_skb+0x537/0x670 net/netlink/af_netlink.c:2564 sock_diag_rcv+0x35/0x40 net/core/sock_diag.c:297 netlink_unicast_kernel net/netlink/af_netlink.c:1335 [inline] netlink_unicast+0xe74/0x1240 net/netlink/af_netlink.c:1361 netlink_sendmsg+0x10c6/0x1260 net/netlink/af_netlink.c:1905 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x332/0x3d0 net/socket.c:745 ____sys_sendmsg+0x7f0/0xb70 net/socket.c:2585 ___sys_sendmsg+0x271/0x3b0 net/socket.c:2639 __sys_sendmsg net/socket.c:2668 [inline] __do_sys_sendmsg net/socket.c:2677 [inline] __se_sys_sendmsg net/socket.c:2675 [inline] __x64_sys_sendmsg+0x27e/0x4a0 net/socket.c:2675 x64_sys_call+0x135e/0x3ce0 arch/x86/include/generated/asm/syscalls_64.h:47 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xd9/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Uninit was stored to memory at: raw_sock_get+0x650/0x800 net/ipv4/raw_diag.c:71 raw_diag_dump_one+0xa1/0x660 net/ipv4/raw_diag.c:99 inet_diag_cmd_exact+0x7d9/0x980 inet_diag_get_exact_compat net/ipv4/inet_diag.c:1404 [inline] inet_diag_rcv_msg_compat+0x469/0x530 net/ipv4/inet_diag.c:1426 sock_diag_rcv_msg+0x23d/0x740 net/core/sock_diag.c:282 netlink_rcv_skb+0x537/0x670 net/netlink/af_netlink.c:2564 sock_diag_rcv+0x35/0x40 net/core/sock_diag.c:297 netlink_unicast_kernel net/netlink/af_netlink.c:1335 [inline] netlink_unicast+0xe74/0x1240 net/netlink/af_netlink.c:1361 netlink_sendmsg+0x10c6/0x1260 net/netlink/af_netlink.c:1905 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x332/0x3d0 net/socket.c:745 ____sys_sendmsg+0x7f0/0xb70 net/socket.c:2585 ___sys_sendmsg+0x271/0x3b0 net/socket.c:2639 __sys_sendmsg net/socket.c:2668 [inline] __do_sys_sendmsg net/socket.c:2677 [inline] __se_sys_sendmsg net/socket.c:2675 [inline] __x64_sys_sendmsg+0x27e/0x4a0 net/socket.c:2675 x64_sys_call+0x135e/0x3ce0 arch/x86/include/generated/asm/syscalls_64.h:47 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xd9/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Local variable req.i created at: inet_diag_get_exact_compat net/ipv4/inet_diag.c:1396 [inline] inet_diag_rcv_msg_compat+0x2a6/0x530 net/ipv4/inet_diag.c:1426 sock_diag_rcv_msg+0x23d/0x740 net/core/sock_diag.c:282 CPU: 1 PID: 8888 Comm: syz-executor.6 Not tainted 6.10.0-rc4-00217-g35bb670d65fc #32 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014 Fixes: 432490f9d455 ("net: ip, diag -- Add diag interface for raw sockets") Reported-by: syzkaller <syzkaller@googlegroups.com> Signed-off-by: Shigeru Yoshida <syoshida@redhat.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20240703091649.111773-1-syoshida@redhat.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-07-04tcp: Don't flag tcp_sk(sk)->rx_opt.saw_unknown for TCP AO.Kuniyuki Iwashima1-0/+7
When we process segments with TCP AO, we don't check it in tcp_parse_options(). Thus, opt_rx->saw_unknown is set to 1, which unconditionally triggers the BPF TCP option parser. Let's avoid the unnecessary BPF invocation. Fixes: 0a3a809089eb ("net/tcp: Verify inbound TCP-AO signed segments") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Acked-by: Dmitry Safonov <0x7f454c46@gmail.com> Link: https://patch.msgid.link/20240703033508.6321-1-kuniyu@amazon.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-07-04drm/xe/mcr: Avoid clobbering DSS steeringMatt Roper1-3/+3
A couple copy/paste mistakes in the code that selects steering targets for OADDRM and INSTANCE0 unintentionally clobbered the steering target for DSS ranges in some cases. The OADDRM/INSTANCE0 values were also not assigned as intended, although that mistake wound up being harmless since the desired values for those specific ranges were '0' which the kzalloc of the GT structure should have already taken care of implicitly. Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs") Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240626210536.1620176-2-matthew.d.roper@intel.com (cherry picked from commit 4f82ac6102788112e599a6074d2c1f2afce923df) Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
2024-07-04drm/xe: fix error handling in xe_migrate_update_pgtablesMatthew Auld1-4/+4
Don't call drm_suballoc_free with sa_bo pointing to PTR_ERR. References: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/2120 Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs") Signed-off-by: Matthew Auld <matthew.auld@intel.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: <stable@vger.kernel.org> # v6.8+ Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240620102025.127699-2-matthew.auld@intel.com (cherry picked from commit ce6b63336f79ec5f3996de65f452330e395f99ae) Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Powered by cgit, Gruvboxed by Blaster4385.