aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2020-02-05KVM: x86: reorganize pvclock_gtod_data membersPaolo Bonzini1-17/+12
We will need a copy of tk->offs_boot in the next patch. Store it and cleanup the struct: instead of storing tk->tkr_xxx.base with the tk->offs_boot included, store the raw value in struct pvclock_clock and sum it in do_monotonic_raw and do_realtime. tk->tkr_xxx.xtime_nsec also moves to struct pvclock_clock. While at it, fix a (usually harmless) typo in do_monotonic_raw, which was using gtod->clock.shift instead of gtod->raw_clock.shift. Fixes: 53fafdbb8b21f ("KVM: x86: switch KVMCLOCK base to monotonic raw clock") Cc: [email protected] Reviewed-by: Vitaly Kuznetsov <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2020-02-05KVM: nVMX: delete meaningless nested_vmx_run() declarationMiaohe Lin1-2/+0
The function nested_vmx_run() declaration is below its implementation. So this is meaningless and should be removed. Signed-off-by: Miaohe Lin <[email protected]> Reviewed-by: Vitaly Kuznetsov <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2020-02-05KVM: SVM: allow AVIC without split irqchipPaolo Bonzini1-1/+1
SVM is now able to disable AVIC dynamically whenever the in-kernel PIT sets up an ack notifier, so we can enable it even if in-kernel IOAPIC/PIC/PIT are in use. Signed-off-by: Paolo Bonzini <[email protected]>
2020-02-05kvm: ioapic: Lazy update IOAPIC EOISuravee Suthikulpanit1-0/+39
In-kernel IOAPIC does not receive EOI with AMD SVM AVIC since the processor accelerate write to APIC EOI register and does not trap if the interrupt is edge-triggered. Workaround this by lazy check for pending APIC EOI at the time when setting new IOPIC irq, and update IOAPIC EOI if no pending APIC EOI. Signed-off-by: Suravee Suthikulpanit <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2020-02-05kvm: ioapic: Refactor kvm_ioapic_update_eoi()Suravee Suthikulpanit1-54/+56
Refactor code for handling IOAPIC EOI for subsequent patch. There is no functional change. Signed-off-by: Suravee Suthikulpanit <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2020-02-05kvm: i8254: Deactivate APICv when using in-kernel PIT re-injection mode.Suravee Suthikulpanit3-2/+22
AMD SVM AVIC accelerates EOI write and does not trap. This causes in-kernel PIT re-injection mode to fail since it relies on irq-ack notifier mechanism. So, APICv is activated only when in-kernel PIT is in discard mode e.g. w/ qemu option: -global kvm-pit.lost_tick_policy=discard Also, introduce APICV_INHIBIT_REASON_PIT_REINJ bit to be used for this reason. Suggested-by: Paolo Bonzini <[email protected]> Signed-off-by: Suravee Suthikulpanit <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2020-02-05svm: Temporarily deactivate AVIC during ExtINT handlingSuravee Suthikulpanit2-4/+30
AMD AVIC does not support ExtINT. Therefore, AVIC must be temporary deactivated and fall back to using legacy interrupt injection via vINTR and interrupt window. Also, introduce APICV_INHIBIT_REASON_IRQWIN to be used for this reason. Signed-off-by: Suravee Suthikulpanit <[email protected]> [Rename svm_request_update_avic to svm_toggle_avic_for_extint. - Paolo] Signed-off-by: Paolo Bonzini <[email protected]>
2020-02-05svm: Deactivate AVIC when launching guest with nested SVM supportSuravee Suthikulpanit2-1/+11
Since AVIC does not currently work w/ nested virtualization, deactivate AVIC for the guest if setting CPUID Fn80000001_ECX[SVM] (i.e. indicate support for SVM, which is needed for nested virtualization). Also, introduce a new APICV_INHIBIT_REASON_NESTED bit to be used for this reason. Suggested-by: Alexander Graf <[email protected]> Signed-off-by: Suravee Suthikulpanit <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2020-02-05kvm: x86: hyperv: Use APICv update request interfaceSuravee Suthikulpanit5-18/+8
Since disabling APICv has to be done for all vcpus on AMD-based system, adopt the newly introduced kvm_request_apicv_update() interface, and introduce a new APICV_INHIBIT_REASON_HYPERV. Also, remove the kvm_vcpu_deactivate_apicv() since no longer used. Cc: Roman Kagan <[email protected]> Signed-off-by: Suravee Suthikulpanit <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2020-02-05svm: Add support for dynamic APICvSuravee Suthikulpanit1-10/+28
Add necessary logics to support (de)activate AVIC at runtime. Signed-off-by: Suravee Suthikulpanit <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2020-02-05kvm: x86: Introduce x86 ops hook for pre-update APICvSuravee Suthikulpanit3-0/+9
AMD SVM AVIC needs to update APIC backing page mapping before changing APICv mode. Introduce struct kvm_x86_ops.pre_update_apicv_exec_ctrl function hook to be called prior KVM APICv update request to each vcpu. Signed-off-by: Suravee Suthikulpanit <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2020-02-05kvm: x86: Introduce APICv x86 ops for checking APIC inhibit reasonsSuravee Suthikulpanit4-0/+21
Inibit reason bits are used to determine if APICv deactivation is applicable for a particular hardware virtualization architecture. Signed-off-by: Suravee Suthikulpanit <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2020-02-05KVM: svm: avic: Add support for dynamic setup/teardown of virtual APIC ↵Suravee Suthikulpanit1-6/+5
backing page Re-factor avic_init_access_page() to avic_update_access_page() since activate/deactivate AVIC requires setting/unsetting the memory region used for virtual APIC backing page (APIC_ACCESS_PAGE_PRIVATE_MEMSLOT). Signed-off-by: Suravee Suthikulpanit <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2020-02-05kvm: x86: svm: Add support to (de)activate posted interruptsSuravee Suthikulpanit1-1/+36
Introduce interface for (de)activate posted interrupts, and implement SVM hooks to toggle AMD IOMMU guest virtual APIC mode. Signed-off-by: Suravee Suthikulpanit <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2020-02-05kvm: x86: Add APICv (de)activate request trace pointsSuravee Suthikulpanit2-0/+21
Add trace points when sending request to (de)activate APICv. Suggested-by: Alexander Graf <[email protected]> Signed-off-by: Suravee Suthikulpanit <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2020-02-05kvm: x86: Add support for dynamic APICv activationSuravee Suthikulpanit2-0/+42
Certain runtime conditions require APICv to be temporary deactivated during runtime. The current implementation only support run-time deactivation of APICv when Hyper-V SynIC is enabled, which is not temporary. In addition, for AMD, when APICv is (de)activated at runtime, all vcpus in the VM have to operate in the same mode. Thus the requesting vcpu must notify the others. So, introduce the following: * A new KVM_REQ_APICV_UPDATE request bit * Interfaces to request all vcpus to update APICv status * A new interface to update APICV-related parameters for each vcpu Signed-off-by: Suravee Suthikulpanit <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2020-02-05KVM: x86: remove get_enable_apicv from kvm_x86_opsPaolo Bonzini3-13/+0
It is unused now. Signed-off-by: Paolo Bonzini <[email protected]>
2020-02-05kvm: x86: Introduce APICv inhibit reason bitsSuravee Suthikulpanit4-2/+38
There are several reasons in which a VM needs to deactivate APICv e.g. disable APICv via parameter during module loading, or when enable Hyper-V SynIC support. Additional inhibit reasons will be introduced later on when dynamic APICv is supported, Introduce KVM APICv inhibit reason bits along with a new variable, apicv_inhibit_reasons, to help keep track of APICv state for each VM, Initially, the APICV_INHIBIT_REASON_DISABLE bit is used to indicate the case where APICv is disabled during KVM module load. (e.g. insmod kvm_amd avic=0 or insmod kvm_intel enable_apicv=0). Signed-off-by: Suravee Suthikulpanit <[email protected]> [Do not use get_enable_apicv; consider irqchip_split in svm.c. - Paolo] Signed-off-by: Paolo Bonzini <[email protected]>
2020-02-05kvm: lapic: Introduce APICv update helper functionSuravee Suthikulpanit2-5/+18
Re-factor code into a helper function for setting lapic parameters when activate/deactivate APICv, and export the function for subsequent usage. Signed-off-by: Suravee Suthikulpanit <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2020-02-05Merge tag 'asoc-v5.6-2' of ↵Takashi Iwai25-123/+118
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v5.6 A collection of updates for bugs fixed since the initial pull request, the most important one being the addition of COMMON_CLK for wcd934x which is needed for MFD to be merged.
2020-02-05ASoC: wcd934x: Add missing COMMON_CLK dependency to SND_SOC_ALL_CODECSGeert Uytterhoeven1-1/+1
Just adding a dependency on COMMON_CLK to SND_SOC_WCD934X is not sufficient, as enabling SND_SOC_ALL_CODECS will still select it, breaking the build later: WARNING: unmet direct dependencies detected for SND_SOC_WCD934X Depends on [n]: SOUND [=m] && !UML && SND [=m] && SND_SOC [=m] && COMMON_CLK [=n] && MFD_WCD934X [=m] Selected by [m]: - SND_SOC_ALL_CODECS [=m] && SOUND [=m] && !UML && SND [=m] && SND_SOC [=m] && COMPILE_TEST [=y] && MFD_WCD934X [=m] ... ERROR: "of_clk_add_provider" [sound/soc/codecs/snd-soc-wcd934x.ko] undefined! ERROR: "of_clk_src_simple_get" [sound/soc/codecs/snd-soc-wcd934x.ko] undefined! ERROR: "clk_hw_register" [sound/soc/codecs/snd-soc-wcd934x.ko] undefined! ERROR: "__clk_get_name" [sound/soc/codecs/snd-soc-wcd934x.ko] undefined! Fix this by adding the missing dependency to SND_SOC_ALL_CODECS Fixes: 42b716359beca106 ("ASoC: wcd934x: Add missing COMMON_CLK dependency") Signed-off-by: Geert Uytterhoeven <[email protected]> Tested-by: Stephen Rothwell <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2020-02-05bootconfig: Only load bootconfig if "bootconfig" is on the kernel cmdlineSteven Rostedt (VMware)3-7/+29
As the bootconfig is appended to the initrd it is not as easy to modify as the kernel command line. If there's some issue with the kernel, and the developer wants to boot a pristine kernel, it should not be needed to modify the initrd to remove the bootconfig for a single boot. As bootconfig is silently added (if the admin does not know where to look they may not know it's being loaded). It should be explicitly added to the kernel cmdline. The loading of the bootconfig is only done if "bootconfig" is on the kernel command line. This will let admins know that the kernel command line is extended. Note, after adding printk()s for when the size is too great or the checksum is wrong, exposed that the current method always looked for the boot config, and if this size and checksum matched, it would parse it (as if either is wrong a printk has been added to show this). It's better to only check this if the boot config is asked to be looked for. Link: https://lore.kernel.org/r/CAHk-=wjfjO+h6bQzrTf=YCZA53Y3EDyAs3Z4gEsT7icA3u_Psw@mail.gmail.com Acked-by: Masami Hiramatsu <[email protected]> Suggested-by: Linus Torvalds <[email protected]> Signed-off-by: Steven Rostedt (VMware) <[email protected]>
2020-02-05dt-bindings: Fix paths in schema $id fieldsRob Herring22-22/+22
The $id path checks were inadequately checking the path part of the $id value. With the check fixed, there's a number of errors that need to be fixed. Most of the errors are including 'bindings/' in the path which should not be as that is considered the root. Cc: Andy Gross <[email protected]> Cc: Bjorn Andersson <[email protected]> Cc: Manivannan Sadhasivam <[email protected]> Cc: Michael Turquette <[email protected]> Cc: Shawn Guo <[email protected]> Cc: Sascha Hauer <[email protected]> Cc: Pengutronix Kernel Team <[email protected]> Cc: Fabio Estevam <[email protected]> Cc: NXP Linux Team <[email protected]> Cc: Maxime Coquelin <[email protected]> Cc: Alexandre Torgue <[email protected]> Cc: "Nuno Sá" <[email protected]> Cc: Jean Delvare <[email protected]> Cc: Stefan Popa <[email protected]> Cc: Jonathan Cameron <[email protected]> Cc: Hartmut Knaack <[email protected]> Cc: Lars-Peter Clausen <[email protected]> Cc: Peter Meerwald-Stadler <[email protected]> Cc: Marcus Folkesson <[email protected]> Cc: Kent Gustavsson <[email protected]> Cc: Dmitry Torokhov <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Reviewed-by: Guenter Roeck <[email protected]> Reviewed-by: Stephen Boyd <[email protected]> Signed-off-by: Rob Herring <[email protected]>
2020-02-05Merge branch 'parisc-5.6-1' of ↵Linus Torvalds9-1206/+55
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc updates from Helge Deller: "A page table initialization cleanup from Mike Rapoport and regenerated defconfig files from Helge Deller" * 'parisc-5.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Regenerate parisc defconfigs parisc: map_pages(): cleanup page table initialization
2020-02-05Merge tag 'jfs-5.6' of git://github.com/kleikamp/linux-shaggyLinus Torvalds1-1/+0
Pull jfs update from David Kleikamp: "Trivial cleanup for jfs" * tag 'jfs-5.6' of git://github.com/kleikamp/linux-shaggy: jfs: remove unused MAXL2PAGES
2020-02-05Merge branch 'work.recursive_removal' of ↵Linus Torvalds9-218/+104
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs recursive removal updates from Al Viro: "We have quite a few places where synthetic filesystems do an equivalent of 'rm -rf', with varying amounts of code duplication, wrong locking, etc. That really ought to be a library helper. Only debugfs (and very similar tracefs) are converted here - I have more conversions, but they'd never been in -next, so they'll have to wait" * 'work.recursive_removal' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: simple_recursive_removal(): kernel-side rm -rf for ramfs-style filesystems
2020-02-05Merge branch 'imm.timestamp' of ↵Linus Torvalds13-107/+61
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs timestamp updates from Al Viro: "More 64bit timestamp work" * 'imm.timestamp' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: kernfs: don't bother with timestamp truncation fs: Do not overload update_time fs: Delete timespec64_trunc() fs: ubifs: Eliminate timespec64_trunc() usage fs: ceph: Delete timespec64_trunc() usage fs: cifs: Delete usage of timespec64_trunc fs: fat: Eliminate timespec64_trunc() usage utimes: Clamp the timestamps in notify_change()
2020-02-04io_uring: cleanup fixed file data table referencesJens Axboe1-13/+19
syzbot reports a use-after-free in io_ring_file_ref_switch() when it tries to switch back to percpu mode. When we put the final reference to the table by calling percpu_ref_kill_and_confirm(), we don't want the zero reference to queue async work for flushing the potentially queued up items. We currently do a few flush_work(), but they merely paper around the issue, since the work item may not have been queued yet depending on the when the percpu-ref callback gets run. Coming into the file unregister, we know we have the ring quiesced. io_ring_file_ref_switch() can check for whether or not the ref is dying or not, and not queue anything async at that point. Once the ref has been confirmed killed, flush any potential items manually. Reported-by: [email protected] Fixes: 05f3fb3c5397 ("io_uring: avoid ring quiesce for fixed file set unregister and update") Signed-off-by: Jens Axboe <[email protected]>
2020-02-04io_uring: spin for sq thread to idle on shutdownJens Axboe1-1/+12
As part of io_uring shutdown, we cancel work that is pending and won't necessarily complete on its own. That includes requests like poll commands and timeouts. If we're using SQPOLL for kernel side submission and we shutdown the ring immediately after queueing such work, we can race with the sqthread doing the submission. This means we may miss cancelling some work, which results in the io_uring shutdown hanging forever. Cc: [email protected] Signed-off-by: Jens Axboe <[email protected]>
2020-02-04dt-bindings: PCI: intel: Fix dt_binding_check compilation failureDilip Kota1-3/+1
Remove <dt-bindings/clock/intel,lgm-clk.h> dependency as it is not present in the mainline tree. Use numeric value instead of LGM_GCLK_PCIE10 macro. Signed-off-by: Dilip Kota <[email protected]> [robh: Also drop interrupt-parent from example] Signed-off-by: Rob Herring <[email protected]>
2020-02-04dt-bindings: phy: Fix errors in intel,lgm-emmc-phy exampleRob Herring1-1/+3
DT labels can't have '-' in them causing a compile failure in the example. Fixing that leads to more warnings: Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.example.dts:23.13-33: Warning (reg_format): /example-0/chiptop@e0200000/emmc-phy@a8:reg: property has invalid length (8 bytes) (#address-cells == 2, #size-cells == 1) Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.example.dt.yaml: Warning (pci_device_bus_num): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.example.dt.yaml: Warning (i2c_bus_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.example.dt.yaml: Warning (spi_bus_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.example.dts:21.33-26.13: Warning (avoid_default_addr_size): /example-0/chiptop@e0200000/emmc-phy@a8: Relying on default #address-cells value Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.example.dts:21.33-26.13: Warning (avoid_default_addr_size): /example-0/chiptop@e0200000/emmc-phy@a8: Relying on default #size-cells value Fixes: 5bc999108025 ("dt-bindings: phy: intel-emmc-phy: Add YAML schema for LGM eMMC PHY") Cc: Ramuthevar Vadivel Murugan <[email protected]> Cc: Dafna Hirschfeld <[email protected]> Cc: Kishon Vijay Abraham I <[email protected]> Signed-off-by: Rob Herring <[email protected]>
2020-02-04Merge branch 'nvme-5.6' of git://git.infradead.org/nvme into block-5.6Jens Axboe6-51/+72
Pull NVMe fixes from Keith. * 'nvme-5.6' of git://git.infradead.org/nvme: nvmet: update AEN list and array at one place nvmet: Fix controller use after free nvmet: Fix error print message at nvmet_install_queue function nvme-pci: remove nvmeq->tags nvmet: fix dsm failure when payload does not match sgl descriptor nvmet: Pass lockdep expression to RCU lists
2020-02-05nvmet: update AEN list and array at one placeDaniel Wagner1-27/+36
All async events are enqueued via nvmet_add_async_event() which updates the ctrl->async_event_cmds[] array and additionally an struct nvmet_async_event is added to the ctrl->async_events list. Under normal operations the nvmet_async_event_work() updates again the ctrl->async_event_cmds and removes the corresponding struct nvmet_async_event from the list again. Though nvmet_sq_destroy() could be called which calls nvmet_async_events_free() which only updates the ctrl->async_event_cmds[] array. Add new functions nvmet_async_events_process() and nvmet_async_events_free() to process async events, update an array and the list. When we destroy submission queue after clearing the aen present on the ctrl->async list we also loop over ctrl->async_event_cmds[] for any requests posted by the host for which we don't have the AEN in the ctrl->async_events list by calling nvmet_async_event_process() and nvmet_async_events_free(). Reviewed-by: Christoph Hellwig <[email protected]> Signed-off-by: Daniel Wagner <[email protected]> [[email protected] * Loop over and clear out outstanding requests * Update changelog ] Signed-off-by: Chaitanya Kulkarni <[email protected]> Signed-off-by: Keith Busch <[email protected]>
2020-02-04ALSA: hda - Fix DP-MST support for NVIDIA codecsNikhil Mahale1-31/+63
If dyn_pcm_assign is set, different jack objects are being created for pcm and pins. If dyn_pcm_assign is set, generic_hdmi_build_jack() calls into add_hdmi_jack_kctl() to create and track separate jack object for pcm. Like sync_eld_via_acomp(), hdmi_present_sense_via_verbs() also need to report status change of the pcm jack. Rename pin_idx_to_jack() to pin_idx_to_pcm_jack(). Update hdmi_present_sense_via_verbs() to report plug state of pcm jack object. Unlike sync_eld_via_acomp(), for !acomp drivers the pcm jack's plug state must be consistent with plug state of pin's jack. Fixes: 5398e94fb753 ("ALSA: hda - Add DP-MST support for NVIDIA codecs") Reported-and-tested-by: Martin Regner <[email protected]> Signed-off-by: Nikhil Mahale <[email protected]> Reviewed-by: Kai Vehmanen <[email protected]> Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2020-02-05nvmet: Fix controller use after freeIsrael Rukshin1-4/+9
After nvmet_install_queue() sets sq->ctrl calling to nvmet_sq_destroy() reduces the controller refcount. In case nvmet_install_queue() fails, calling to nvmet_ctrl_put() is done twice (at nvmet_sq_destroy and nvmet_execute_io_connect/nvmet_execute_admin_connect) instead of once for the queue which leads to use after free of the controller. Fix this by set NULL at sq->ctrl in case of a failure at nvmet_install_queue(). The bug leads to the following Call Trace: [65857.994862] refcount_t: underflow; use-after-free. [65858.108304] Workqueue: events nvmet_rdma_release_queue_work [nvmet_rdma] [65858.115557] RIP: 0010:refcount_warn_saturate+0xe5/0xf0 [65858.208141] Call Trace: [65858.211203] nvmet_sq_destroy+0xe1/0xf0 [nvmet] [65858.216383] nvmet_rdma_release_queue_work+0x37/0xf0 [nvmet_rdma] [65858.223117] process_one_work+0x167/0x370 [65858.227776] worker_thread+0x49/0x3e0 [65858.232089] kthread+0xf5/0x130 [65858.235895] ? max_active_store+0x80/0x80 [65858.240504] ? kthread_bind+0x10/0x10 [65858.244832] ret_from_fork+0x1f/0x30 [65858.249074] ---[ end trace f82d59250b54beb7 ]--- Fixes: bb1cc74790eb ("nvmet: implement valid sqhd values in completions") Fixes: 1672ddb8d691 ("nvmet: Add install_queue callout") Signed-off-by: Israel Rukshin <[email protected]> Reviewed-by: Max Gurtovoy <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Signed-off-by: Keith Busch <[email protected]>
2020-02-05nvmet: Fix error print message at nvmet_install_queue functionIsrael Rukshin1-1/+1
Place the arguments in the correct order. Fixes: 1672ddb8d691 ("nvmet: Add install_queue callout") Signed-off-by: Israel Rukshin <[email protected]> Reviewed-by: Max Gurtovoy <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Signed-off-by: Keith Busch <[email protected]>
2020-02-04x86/PCI: Define to_pci_sysdata() even when !CONFIG_PCIJason A. Donenfeld1-2/+2
Recently, the to_pci_sysdata() helper was added inside the CONFIG_PCI guard, but it is used inside a CONFIG_NUMA guard, which does not require CONFIG_PCI. This breaks builds on !CONFIG_PCI machines. Make to_pci_sysdata() available in all configurations. Fixes: aad6aa0cd674 ("x86/PCI: Add to_pci_sysdata() helper") Link: https://lore.kernel.org/r/[email protected] Reported-by: Randy Dunlap <[email protected]> Signed-off-by: Jason A. Donenfeld <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Acked-by: Randy Dunlap <[email protected]> # build-tested
2020-02-04brd: check and limit max_part parZhiqiang Liu1-2/+20
In brd_init func, rd_nr num of brd_device are firstly allocated and add in brd_devices, then brd_devices are traversed to add each brd_device by calling add_disk func. When allocating brd_device, the disk->first_minor is set to i * max_part, if rd_nr * max_part is larger than MINORMASK, two different brd_device may have the same devt, then only one of them can be successfully added. when rmmod brd.ko, it will cause oops when calling brd_exit. Follow those steps: # modprobe brd rd_nr=3 rd_size=102400 max_part=1048576 # rmmod brd then, the oops will appear. Oops log: [ 726.613722] Call trace: [ 726.614175] kernfs_find_ns+0x24/0x130 [ 726.614852] kernfs_find_and_get_ns+0x44/0x68 [ 726.615749] sysfs_remove_group+0x38/0xb0 [ 726.616520] blk_trace_remove_sysfs+0x1c/0x28 [ 726.617320] blk_unregister_queue+0x98/0x100 [ 726.618105] del_gendisk+0x144/0x2b8 [ 726.618759] brd_exit+0x68/0x560 [brd] [ 726.619501] __arm64_sys_delete_module+0x19c/0x2a0 [ 726.620384] el0_svc_common+0x78/0x130 [ 726.621057] el0_svc_handler+0x38/0x78 [ 726.621738] el0_svc+0x8/0xc [ 726.622259] Code: aa0203f6 aa0103f7 aa1e03e0 d503201f (7940e260) Here, we add brd_check_and_reset_par func to check and limit max_part par. -- V5->V6: - remove useless code V4->V5:(suggested by Ming Lei) - make sure max_part is not larger than DISK_MAX_PARTS V3->V4:(suggested by Ming Lei) - remove useless change - add one limit of max_part V2->V3: (suggested by Ming Lei) - clear .minors when running out of consecutive minor space in brd_alloc - remove limit of rd_nr V1->V2: - add more checks in brd_check_par_valid as suggested by Ming Lei. Signed-off-by: Zhiqiang Liu <[email protected]> Reviewed-by: Bob Liu <[email protected]> Reviewed-by: Ming Lei <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2020-02-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds47-246/+569
Pull networking fixes from David Miller: 1) Use after free in rxrpc_put_local(), from David Howells. 2) Fix 64-bit division error in mlxsw, from Nathan Chancellor. 3) Make sure we clear various bits of TCP state in response to tcp_disconnect(). From Eric Dumazet. 4) Fix netlink attribute policy in cls_rsvp, from Eric Dumazet. 5) txtimer must be deleted in stmmac suspend(), from Nicolin Chen. 6) Fix TC queue mapping in bnxt_en driver, from Michael Chan. 7) Various netdevsim fixes from Taehee Yoo (use of uninitialized data, snapshot panics, stack out of bounds, etc.) 8) cls_tcindex changes hash table size after allocating the table, fix from Cong Wang. 9) Fix regression in the enforcement of session ID uniqueness in l2tp. We only have to enforce uniqueness for IP based tunnels not UDP ones. From Ridge Kennedy. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (46 commits) gtp: use __GFP_NOWARN to avoid memalloc warning l2tp: Allow duplicate session creation with UDP r8152: Add MAC passthrough support to new device net_sched: fix an OOB access in cls_tcindex qed: Remove set but not used variable 'p_link' tc-testing: add missing 'nsPlugin' to basic.json tc-testing: fix eBPF tests failure on linux fresh clones net: hsr: fix possible NULL deref in hsr_handle_frame() netdevsim: remove unused sdev code netdevsim: use __GFP_NOWARN to avoid memalloc warning netdevsim: use IS_ERR instead of IS_ERR_OR_NULL for debugfs netdevsim: fix stack-out-of-bounds in nsim_dev_debugfs_init() netdevsim: fix panic in nsim_dev_take_snapshot_write() netdevsim: disable devlink reload when resources are being used netdevsim: fix using uninitialized resources bnxt_en: Fix TC queue mapping. bnxt_en: Fix logic that disables Bus Master during firmware reset. bnxt_en: Fix RDMA driver failure with SRIOV after firmware reset. bnxt_en: Refactor logic to re-enable SRIOV after firmware reset detected. net: stmmac: Delete txtimer in suspend() ...
2020-02-04Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds7-32/+29
Pull ARM updates from Russell King: - decompressor updates - prevention of out-of-bounds access while stacktracing - fix a section mismatch warning with free_memmap() - make kexec depend on MMU to avoid some build errors - remove swapops stubs * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 8954/1: NOMMU: remove stubs for swapops ARM: 8952/1: Disable kmemleak on XIP kernels ARM: 8951/1: Fix Kexec compilation issue. ARM: 8949/1: mm: mark free_memmap as __init ARM: 8948/1: Prevent OOB access in stacktrace ARM: 8945/1: decompressor: use CONFIG option instead of cc-option ARM: 8942/1: Revert "8857/1: efi: enable CP15 DMB instructions before cleaning the cache" ARM: 8941/1: decompressor: enable CP15 barrier instructions in v7 cache setup code
2020-02-04Merge tag 'powerpc-5.6-1' of ↵Linus Torvalds141-1121/+2310
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: "A pretty small batch for us, and apologies for it being a bit late, I wanted to sneak Christophe's user_access_begin() series in. Summary: - Implement user_access_begin() and friends for our platforms that support controlling kernel access to userspace. - Enable CONFIG_VMAP_STACK on 32-bit Book3S and 8xx. - Some tweaks to our pseries IOMMU code to allow SVMs ("secure" virtual machines) to use the IOMMU. - Add support for CLOCK_{REALTIME/MONOTONIC}_COARSE to the 32-bit VDSO, and some other improvements. - A series to use the PCI hotplug framework to control opencapi card's so that they can be reset and re-read after flashing a new FPGA image. As well as other minor fixes and improvements as usual. Thanks to: Alastair D'Silva, Alexandre Ghiti, Alexey Kardashevskiy, Andrew Donnellan, Aneesh Kumar K.V, Anju T Sudhakar, Bai Yingjie, Chen Zhou, Christophe Leroy, Frederic Barrat, Greg Kurz, Jason A. Donenfeld, Joel Stanley, Jordan Niethe, Julia Lawall, Krzysztof Kozlowski, Laurent Dufour, Laurentiu Tudor, Linus Walleij, Michael Bringmann, Nathan Chancellor, Nicholas Piggin, Nick Desaulniers, Oliver O'Halloran, Peter Ujfalusi, Pingfan Liu, Ram Pai, Randy Dunlap, Russell Currey, Sam Bobroff, Sebastian Andrzej Siewior, Shawn Anastasio, Stephen Rothwell, Steve Best, Sukadev Bhattiprolu, Thiago Jung Bauermann, Tyrel Datwyler, Vaibhav Jain" * tag 'powerpc-5.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (131 commits) powerpc: configs: Cleanup old Kconfig options powerpc/configs/skiroot: Enable some more hardening options powerpc/configs/skiroot: Disable xmon default & enable reboot on panic powerpc/configs/skiroot: Enable security features powerpc/configs/skiroot: Update for symbol movement only powerpc/configs/skiroot: Drop default n CONFIG_CRYPTO_ECHAINIV powerpc/configs/skiroot: Drop HID_LOGITECH powerpc/configs: Drop NET_VENDOR_HP which moved to staging powerpc/configs: NET_CADENCE became NET_VENDOR_CADENCE powerpc/configs: Drop CONFIG_QLGE which moved to staging powerpc: Do not consider weak unresolved symbol relocations as bad powerpc/32s: Fix kasan_early_hash_table() for CONFIG_VMAP_STACK powerpc: indent to improve Kconfig readability powerpc: Provide initial documentation for PAPR hcalls powerpc: Implement user_access_save() and user_access_restore() powerpc: Implement user_access_begin and friends powerpc/32s: Prepare prevent_user_access() for user_access_end() powerpc/32s: Drop NULL addr verification powerpc/kuap: Fix set direction in allow/prevent_user_access() powerpc/32s: Fix bad_kuap_fault() ...
2020-02-04Merge tag 'microblaze-v5.6-rc1' of git://git.monstr.eu/linux-2.6-microblazeLinus Torvalds15-17/+20
Pull Microblaze update from Michal Simek: - enable CMA - add support for MB v11 - defconfig updates - minor fixes * tag 'microblaze-v5.6-rc1' of git://git.monstr.eu/linux-2.6-microblaze: microblaze: Add ID for Microblaze v11 microblaze: Prevent the overflow of the start microblaze: Wire CMA allocator asm-generic: Make dma-contiguous.h a mandatory include/asm header microblaze: Sync defconfig with latest Kconfig layout microblaze: defconfig: Disable EXT2 driver and Enable EXT3 & EXT4 drivers microblaze: Align comments with register usage
2020-02-04Merge tag 'ovl-update-5.6' of ↵Linus Torvalds13-228/+521
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs Pull overlayfs update from Miklos Szeredi: - Try to preserve holes in sparse files when copying up, thus saving disk space and improving performance. - Fix a performance regression introduced in v4.19 by preserving asynchronicity of IO when fowarding to underlying layers. Add VFS helpers to submit async iocbs. - Fix a regression in lseek(2) introduced in v4.19 that breaks >2G seeks on 32bit kernels. - Fix a corner case where st_ino/st_dev was not preserved across copy up. - Miscellaneous fixes and cleanups. * tag 'ovl-update-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs: ovl: fix lseek overflow on 32bit ovl: add splice file read write helper ovl: implement async IO routines vfs: add vfs_iocb_iter_[read|write] helper functions ovl: layer is const ovl: fix corner case of non-constant st_dev;st_ino ovl: fix corner case of conflicting lower layer uuid ovl: generalize the lower_fs[] array ovl: simplify ovl_same_sb() helper ovl: generalize the lower_layers[] array ovl: improving copy-up efficiency for big sparse file ovl: use ovl_inode_lock in ovl_llseek() ovl: use pr_fmt auto generate prefix ovl: fix wrong WARN_ON() in ovl_cache_update_ino()
2020-02-04gtp: use __GFP_NOWARN to avoid memalloc warningTaehee Yoo1-2/+2
gtp hashtable size is received by user-space. So, this hashtable size could be too large. If so, kmalloc will internally print a warning message. This warning message is actually not necessary for the gtp module. So, this patch adds __GFP_NOWARN to avoid this message. Splat looks like: [ 2171.200049][ T1860] WARNING: CPU: 1 PID: 1860 at mm/page_alloc.c:4713 __alloc_pages_nodemask+0x2f3/0x740 [ 2171.238885][ T1860] Modules linked in: gtp veth openvswitch nsh nf_conncount nf_nat nf_conntrack nf_defrag_ipv] [ 2171.262680][ T1860] CPU: 1 PID: 1860 Comm: gtp-link Not tainted 5.5.0+ #321 [ 2171.263567][ T1860] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 2171.264681][ T1860] RIP: 0010:__alloc_pages_nodemask+0x2f3/0x740 [ 2171.265332][ T1860] Code: 64 fe ff ff 65 48 8b 04 25 c0 0f 02 00 48 05 f0 12 00 00 41 be 01 00 00 00 49 89 47 0 [ 2171.267301][ T1860] RSP: 0018:ffff8880b51af1f0 EFLAGS: 00010246 [ 2171.268320][ T1860] RAX: ffffed1016a35e43 RBX: 0000000000000000 RCX: 0000000000000000 [ 2171.269517][ T1860] RDX: 0000000000000000 RSI: 000000000000000b RDI: 0000000000000000 [ 2171.270305][ T1860] RBP: 0000000000040cc0 R08: ffffed1018893109 R09: dffffc0000000000 [ 2171.275973][ T1860] R10: 0000000000000001 R11: ffffed1018893108 R12: 1ffff11016a35e43 [ 2171.291039][ T1860] R13: 000000000000000b R14: 000000000000000b R15: 00000000000f4240 [ 2171.292328][ T1860] FS: 00007f53cbc83740(0000) GS:ffff8880da000000(0000) knlGS:0000000000000000 [ 2171.293409][ T1860] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 2171.294586][ T1860] CR2: 000055f540014508 CR3: 00000000b49f2004 CR4: 00000000000606e0 [ 2171.295424][ T1860] Call Trace: [ 2171.295756][ T1860] ? mark_held_locks+0xa5/0xe0 [ 2171.296659][ T1860] ? __alloc_pages_slowpath+0x21b0/0x21b0 [ 2171.298283][ T1860] ? gtp_encap_enable_socket+0x13e/0x400 [gtp] [ 2171.298962][ T1860] ? alloc_pages_current+0xc1/0x1a0 [ 2171.299475][ T1860] kmalloc_order+0x22/0x80 [ 2171.299936][ T1860] kmalloc_order_trace+0x1d/0x140 [ 2171.300437][ T1860] __kmalloc+0x302/0x3a0 [ 2171.300896][ T1860] gtp_newlink+0x293/0xba0 [gtp] [ ... ] Fixes: 459aa660eb1d ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)") Signed-off-by: Taehee Yoo <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-02-04l2tp: Allow duplicate session creation with UDPRidge Kennedy1-1/+6
In the past it was possible to create multiple L2TPv3 sessions with the same session id as long as the sessions belonged to different tunnels. The resulting sessions had issues when used with IP encapsulated tunnels, but worked fine with UDP encapsulated ones. Some applications began to rely on this behaviour to avoid having to negotiate unique session ids. Some time ago a change was made to require session ids to be unique across all tunnels, breaking the applications making use of this "feature". This change relaxes the duplicate session id check to allow duplicates if both of the colliding sessions belong to UDP encapsulated tunnels. Fixes: dbdbc73b4478 ("l2tp: fix duplicate session creation") Signed-off-by: Ridge Kennedy <[email protected]> Acked-by: James Chapman <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-02-04ASoC: wcd934x: Add missing COMMON_CLK dependencySrinivas Kandagatla1-0/+1
Looks like some platforms are not yet using COMMON CLK. PowerPC allyesconfig failed with below error in next ld: sound/soc/codecs/wcd934x.o:(.toc+0x0): undefined reference to `of_clk_src_simple_get' ld: sound/soc/codecs/wcd934x.o: in function `.wcd934x_codec_probe': wcd934x.c:(.text.wcd934x_codec_probe+0x3d4): undefined reference to `.__clk_get_name' ld: wcd934x.c:(.text.wcd934x_codec_probe+0x438): undefined reference to `.clk_hw_register' ld: wcd934x.c:(.text.wcd934x_codec_probe+0x474): undefined reference to `.of_clk_add_provider' Add the missing COMMON_CLK dependency to fix this errors. Reported-by: Stephen Rothwell <[email protected]> Signed-off-by: Srinivas Kandagatla <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2020-02-04r8152: Add MAC passthrough support to new deviceKai-Heng Feng1-3/+10
Device 0xa387 also supports MAC passthrough, therefore add it to the whitelst. BugLink: https://bugs.launchpad.net/bugs/1827961/comments/30 Signed-off-by: Kai-Heng Feng <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-02-04net_sched: fix an OOB access in cls_tcindexCong Wang1-20/+20
As Eric noticed, tcindex_alloc_perfect_hash() uses cp->hash to compute the size of memory allocation, but cp->hash is set again after the allocation, this caused an out-of-bound access. So we have to move all cp->hash initialization and computation before the memory allocation. Move cp->mask and cp->shift together as cp->hash may need them for computation too. Reported-and-tested-by: [email protected] Fixes: 331b72922c5f ("net: sched: RCU cls_tcindex") Cc: Eric Dumazet <[email protected]> Cc: John Fastabend <[email protected]> Cc: Jamal Hadi Salim <[email protected]> Cc: Jiri Pirko <[email protected]> Cc: Jakub Kicinski <[email protected]> Signed-off-by: Cong Wang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-02-04microblaze: Add ID for Microblaze v11Michal Simek1-0/+1
List Microblaze v11 from PVR. Signed-off-by: Michal Simek <[email protected]>
2020-02-04microblaze: Prevent the overflow of the startShubhrajyoti Datta1-1/+2
In case the start + cache size is more than the max int the start overflows. Prevent the same. Signed-off-by: Shubhrajyoti Datta <[email protected]> Signed-off-by: Michal Simek <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.