aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2020-01-14staging: rtl8188eu: remove unnecessary parentheses in rtl8188e_dm.cMichael Straube1-4/+4
Remove unnecessary parentheses reported by checkpatch. Signed-off-by: Michael Straube <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-01-14staging: rtl8188eu: cleanup long lines in rtl8188e_dm.cMichael Straube1-8/+18
Cleanup lines over 80 characters in rtl8188e_dm.c by adding appropriate line breaks. Signed-off-by: Michael Straube <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-01-14staging: rtl8188eu: convert rtw_hal_antdiv_before_linked() to boolMichael Straube2-2/+2
Function rtw_hal_antdiv_before_linked() returns boolean values, so change the return type from u8 to bool. Signed-off-by: Michael Straube <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-01-14staging: rtl8188eu: refactor rtw_hal_antdiv_before_linked()Michael Straube1-8/+9
Refactor rtw_hal_antdiv_before_linked() to clear checkpatch warnings. WARNING: line over 80 characters WARNING: else is not generally useful after a break or return Signed-off-by: Michael Straube <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-01-14staging: rtl8723bs: remove ODM_GetRightChnlPlaceforIQK()Michael Straube3-45/+4
Function ODM_GetRightChnlPlaceforIQK() returns non-zero values only for channels > 14. According to the TODO code valid only for 5 GHz should be removed. - find and remove remaining code valid only for 5 GHz. Most of the obvious ones have been removed, but things like channel > 14 still exist. Remove ODM_GetRightChnlPlaceforIQK() and replace the uses of the return value with zero. Signed-off-by: Michael Straube <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-01-14staging: exfat: Fix alignment warningsPragat Pandya3-17/+18
Fix checkpatch warning "Alignment should match open parenthesis". Signed-off-by: Pragat Pandya <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-01-14staging: rtl8188eu: remove unused parameters from rtw_check_network_typeMichael Straube3-4/+4
Parameters 'ratelen' and 'channel' of function rtw_check_network_type are unused, remove them. Reduces object file size by 62 bytes. text data bss dec hex filename 398525 12896 4688 416109 6596d drivers/staging/rtl8188eu/r8188eu.o 398463 12896 4688 416047 6592f drivers/staging/rtl8188eu/r8188eu.o Signed-off-by: Michael Straube <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-01-14USB: serial: opticon: fix control-message timeoutsJohan Hovold1-1/+1
The driver was issuing synchronous uninterruptible control requests without using a timeout. This could lead to the driver hanging on open() or tiocmset() due to a malfunctioning (or malicious) device until the device is physically disconnected. The USB upper limit of five seconds per request should be more than enough. Fixes: 309a057932ab ("USB: opticon: add rts and cts support") Cc: stable <[email protected]> # 2.6.39 Cc: Martin Jansen <[email protected]> Reviewed-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Johan Hovold <[email protected]>
2020-01-14ALSA: usb-audio: fix sync-ep altsetting sanity checkJohan Hovold1-1/+1
The altsetting sanity check in set_sync_ep_implicit_fb_quirk() was checking for there to be at least one altsetting but then went on to access the second one, which may not exist. This could lead to random slab data being used to initialise the sync endpoint in snd_usb_add_endpoint(). Fixes: c75a8a7ae565 ("ALSA: snd-usb: add support for implicit feedback") Fixes: ca10a7ebdff1 ("ALSA: usb-audio: FT C400 sync playback EP to capture EP") Fixes: 5e35dc0338d8 ("ALSA: usb-audio: add implicit fb quirk for Behringer UFX1204") Fixes: 17f08b0d9aaf ("ALSA: usb-audio: add implicit fb quirk for Axe-Fx II") Fixes: 103e9625647a ("ALSA: usb-audio: simplify set_sync_ep_implicit_fb_quirk") Cc: stable <[email protected]> # 3.5 Signed-off-by: Johan Hovold <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2020-01-14parisc: fix map_pages() to actually populate upper directoryMike Rapoport1-1/+1
The commit d96885e277b5 ("parisc: use pgtable-nopXd instead of 4level-fixup") converted PA-RISC to use folded page tables, but it missed the conversion of pgd_populate() to pud_populate() in maps_pages() function. This caused the upper page table directory to remain empty and the system would crash as a result. Using pud_populate() that actually populates the page table instead of dummy pgd_populate() fixes the issue. Fixes: d96885e277b5 ("parisc: use pgtable-nopXd instead of 4level-fixup") Reported-by: Meelis Roos <[email protected]> Reported-by: Jeroen Roovers <[email protected]> Reported-by: Mikulas Patocka <[email protected]> Tested-by: Jeroen Roovers <[email protected]> Tested-by: Mikulas Patocka <[email protected]> Signed-off-by: Mike Rapoport <[email protected]> Signed-off-by: Helge Deller <[email protected]>
2020-01-14parisc: Use proper printk format for resource_size_tKrzysztof Kozlowski1-2/+2
resource_size_t should be printed with its own size-independent format to fix warnings when compiling on 64-bit platform (e.g. with COMPILE_TEST): arch/parisc/kernel/drivers.c: In function 'print_parisc_device': arch/parisc/kernel/drivers.c:892:9: warning: format '%p' expects argument of type 'void *', but argument 4 has type 'resource_size_t {aka unsigned int}' [-Wformat=] Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Helge Deller <[email protected]>
2020-01-14drm/i915/pmu: Do not use colons or dashes in PMU namesTvrtko Ursulin1-3/+8
We use PCI device path in the registered PMU name in order to distinguish between multiple GPUs. But since tools/perf reserves a special meaning to dash and colon characters we need to transliterate them to something else. We choose an underscore. v2: * Use strreplace. (Chris) * Dashes are not good either. (Chris) Signed-off-by: Tvrtko Ursulin <[email protected]> Reported-by: Dmitry Rogozhkin <[email protected]> Fixes: 05488673a4d4 ("drm/i915/pmu: Support multiple GPUs") Cc: Chris Wilson <[email protected]> Cc: Michal Wajdeczko <[email protected]> Cc: Andi Kleen <[email protected]> Reviewed-by: Chris Wilson <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit aebf3b521b34ca49f6e81c667f92364334ca27cf) Signed-off-by: Joonas Lahtinen <[email protected]>
2020-01-13NFC: pn533: fix bulk-message timeoutJohan Hovold1-1/+1
The driver was doing a synchronous uninterruptible bulk-transfer without using a timeout. This could lead to the driver hanging on probe due to a malfunctioning (or malicious) device until the device is physically disconnected. While sleeping in probe the driver prevents other devices connected to the same hub from being added to (or removed from) the bus. An arbitrary limit of five seconds should be more than enough. Fixes: dbafc28955fa ("NFC: pn533: don't send USB data off of the stack") Signed-off-by: Johan Hovold <[email protected]> Reviewed-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2020-01-13qmi_wwan: Add support for Quectel RM500QKristian Evensen1-0/+1
RM500Q is a 5G module from Quectel, supporting both standalone and non-standalone modes. The normal Quectel quirks apply (DTR and dynamic interface numbers). Signed-off-by: Kristian Evensen <[email protected]> Acked-by: Bjørn Mork <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2020-01-13Merge tag 'Intel-CVE-2019-14615' from bundle by Akeem Abodunrin.Linus Torvalds1-0/+8
Merge Intel Gen9 graphics fix from Akeem Abodunrin: "Insufficient control flow in certain data structures for some Intel Processors with Intel Processor Graphics may allow an unauthenticated user to potentially enable information disclosure via local access This provides mitigation for Gen9 hardware. Note that Gen8 is not impacted due to a previously implemented workaround. The mitigation involves using an existing hardware feature to forcibly clear down all EU state at each context switch" * tag 'Intel-CVE-2019-14615' of emailed bundle from Akeem G Abodunrin <[email protected]>: drm/i915/gen9: Clear residual context state on context switch
2020-01-13net: macb: fix for fixed-link modeMilind Parab1-13/+17
This patch fix the issue with fixed link. With fixed-link device opening fails due to macb_phylink_connect not handling fixed-link mode, in which case no MAC-PHY connection is needed and phylink_connect return success (0), however in current driver attempt is made to search and connect to PHY even for fixed-link. Fixes: 7897b071ac3b ("net: macb: convert to phylink") Signed-off-by: Milind Parab <[email protected]> Reviewed-by: Claudiu Beznea <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2020-01-13io_uring: don't setup async context for read/write fixedJens Axboe1-0/+3
We don't need it, and if we have it, then the retry handler will attempt to copy the non-existent iovec with the inline iovec, with a segment count that doesn't make sense. Fixes: f67676d160c6 ("io_uring: ensure async punted read/write requests copy iovec") Reported-by: Jonathan Lemon <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2020-01-13mm: khugepaged: add trace status description for SCAN_PAGE_HAS_PRIVATEYang Shi1-1/+2
Commit 99cb0dbd47a1 ("mm,thp: add read-only THP support for (non-shmem) FS") introduced a new khugepaged scan result: SCAN_PAGE_HAS_PRIVATE, but the corresponding description for trace events were not added. Link: http://lkml.kernel.org/r/[email protected] Fixes: 99cb0dbd47a1 ("mm,thp: add read-only THP support for (non-shmem) FS") Signed-off-by: Yang Shi <[email protected]> Cc: Song Liu <[email protected]> Cc: Kirill A. Shutemov <[email protected]> Cc: Anshuman Khandual <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2020-01-13mm: memcg/slab: call flush_memcg_workqueue() only if memcg workqueue is validAdrian Huang1-1/+2
When booting with amd_iommu=off, the following WARNING message appears: AMD-Vi: AMD IOMMU disabled on kernel command-line ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at kernel/workqueue.c:2772 flush_workqueue+0x42e/0x450 Modules linked in: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.5.0-rc3-amd-iommu #6 Hardware name: Lenovo ThinkSystem SR655-2S/7D2WRCZ000, BIOS D8E101L-1.00 12/05/2019 RIP: 0010:flush_workqueue+0x42e/0x450 Code: ff 0f 0b e9 7a fd ff ff 4d 89 ef e9 33 fe ff ff 0f 0b e9 7f fd ff ff 0f 0b e9 bc fd ff ff 0f 0b e9 a8 fd ff ff e8 52 2c fe ff <0f> 0b 31 d2 48 c7 c6 e0 88 c5 95 48 c7 c7 d8 ad f0 95 e8 19 f5 04 Call Trace: kmem_cache_destroy+0x69/0x260 iommu_go_to_state+0x40c/0x5ab amd_iommu_prepare+0x16/0x2a irq_remapping_prepare+0x36/0x5f enable_IR_x2apic+0x21/0x172 default_setup_apic_routing+0x12/0x6f apic_intr_mode_init+0x1a1/0x1f1 x86_late_time_init+0x17/0x1c start_kernel+0x480/0x53f secondary_startup_64+0xb6/0xc0 ---[ end trace 30894107c3749449 ]--- x2apic: IRQ remapping doesn't support X2APIC mode x2apic disabled The warning is caused by the calling of 'kmem_cache_destroy()' in free_iommu_resources(). Here is the call path: free_iommu_resources kmem_cache_destroy flush_memcg_workqueue flush_workqueue The root cause is that the IOMMU subsystem runs before the workqueue subsystem, which the variable 'wq_online' is still 'false'. This leads to the statement 'if (WARN_ON(!wq_online))' in flush_workqueue() is 'true'. Since the variable 'memcg_kmem_cache_wq' is not allocated during the time, it is unnecessary to call flush_memcg_workqueue(). This prevents the WARNING message triggered by flush_workqueue(). Link: http://lkml.kernel.org/r/[email protected] Fixes: 92ee383f6daab ("mm: fix race between kmem_cache destroy, create and deactivate") Signed-off-by: Adrian Huang <[email protected]> Reported-by: Xiaochun Lee <[email protected]> Reviewed-by: Shakeel Butt <[email protected]> Cc: Joerg Roedel <[email protected]> Cc: Christoph Lameter <[email protected]> Cc: Pekka Enberg <[email protected]> Cc: David Rientjes <[email protected]> Cc: Joonsoo Kim <[email protected]> Cc: Michal Hocko <[email protected]> Cc: Johannes Weiner <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2020-01-13mm/page-writeback.c: improve arithmetic divisionsWen Yang1-1/+1
Use div64_ul() instead of do_div() if the divisor is unsigned long, to avoid truncation to 32-bit on 64-bit platforms. Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Wen Yang <[email protected]> Reviewed-by: Andrew Morton <[email protected]> Cc: Qian Cai <[email protected]> Cc: Tejun Heo <[email protected]> Cc: Jens Axboe <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2020-01-13mm/page-writeback.c: use div64_ul() for u64-by-unsigned-long divideWen Yang1-2/+2
The two variables 'numerator' and 'denominator', though they are declared as long, they should actually be unsigned long (according to the implementation of the fprop_fraction_percpu() function) And do_div() does a 64-by-32 division, while the divisor 'denominator' is unsigned long, thus 64-bit on 64-bit platforms. Hence the proper function to call is div64_ul(). Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Wen Yang <[email protected]> Reviewed-by: Andrew Morton <[email protected]> Cc: Qian Cai <[email protected]> Cc: Tejun Heo <[email protected]> Cc: Jens Axboe <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2020-01-13mm/page-writeback.c: avoid potential division by zero in wb_min_max_ratio()Wen Yang1-2/+2
Patch series "use div64_ul() instead of div_u64() if the divisor is unsigned long". We were first inspired by commit b0ab99e7736a ("sched: Fix possible divide by zero in avg_atom () calculation"), then refer to the recently analyzed mm code, we found this suspicious place. 201 if (min) { 202 min *= this_bw; 203 do_div(min, tot_bw); 204 } And we also disassembled and confirmed it: /usr/src/debug/kernel-4.9.168-016.ali3000/linux-4.9.168-016.ali3000.alios7.x86_64/mm/page-writeback.c: 201 0xffffffff811c37da <__wb_calc_thresh+234>: xor %r10d,%r10d 0xffffffff811c37dd <__wb_calc_thresh+237>: test %rax,%rax 0xffffffff811c37e0 <__wb_calc_thresh+240>: je 0xffffffff811c3800 <__wb_calc_thresh+272> /usr/src/debug/kernel-4.9.168-016.ali3000/linux-4.9.168-016.ali3000.alios7.x86_64/mm/page-writeback.c: 202 0xffffffff811c37e2 <__wb_calc_thresh+242>: imul %r8,%rax /usr/src/debug/kernel-4.9.168-016.ali3000/linux-4.9.168-016.ali3000.alios7.x86_64/mm/page-writeback.c: 203 0xffffffff811c37e6 <__wb_calc_thresh+246>: mov %r9d,%r10d ---> truncates it to 32 bits here 0xffffffff811c37e9 <__wb_calc_thresh+249>: xor %edx,%edx 0xffffffff811c37eb <__wb_calc_thresh+251>: div %r10 0xffffffff811c37ee <__wb_calc_thresh+254>: imul %rbx,%rax 0xffffffff811c37f2 <__wb_calc_thresh+258>: shr $0x2,%rax 0xffffffff811c37f6 <__wb_calc_thresh+262>: mul %rcx 0xffffffff811c37f9 <__wb_calc_thresh+265>: shr $0x2,%rdx 0xffffffff811c37fd <__wb_calc_thresh+269>: mov %rdx,%r10 This series uses div64_ul() instead of div_u64() if the divisor is unsigned long, to avoid truncation to 32-bit on 64-bit platforms. This patch (of 3): The variables 'min' and 'max' are unsigned long and do_div truncates them to 32 bits, which means it can test non-zero and be truncated to zero for division. Fix this issue by using div64_ul() instead. Link: http://lkml.kernel.org/r/[email protected] Fixes: 693108a8a667 ("writeback: make bdi->min/max_ratio handling cgroup writeback aware") Signed-off-by: Wen Yang <[email protected]> Reviewed-by: Andrew Morton <[email protected]> Cc: Qian Cai <[email protected]> Cc: Tejun Heo <[email protected]> Cc: Jens Axboe <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2020-01-13mm, debug_pagealloc: don't rely on static keys too earlyVlastimil Babka6-32/+34
Commit 96a2b03f281d ("mm, debug_pagelloc: use static keys to enable debugging") has introduced a static key to reduce overhead when debug_pagealloc is compiled in but not enabled. It relied on the assumption that jump_label_init() is called before parse_early_param() as in start_kernel(), so when the "debug_pagealloc=on" option is parsed, it is safe to enable the static key. However, it turns out multiple architectures call parse_early_param() earlier from their setup_arch(). x86 also calls jump_label_init() even earlier, so no issue was found while testing the commit, but same is not true for e.g. ppc64 and s390 where the kernel would not boot with debug_pagealloc=on as found by our QA. To fix this without tricky changes to init code of multiple architectures, this patch partially reverts the static key conversion from 96a2b03f281d. Init-time and non-fastpath calls (such as in arch code) of debug_pagealloc_enabled() will again test a simple bool variable. Fastpath mm code is converted to a new debug_pagealloc_enabled_static() variant that relies on the static key, which is enabled in a well-defined point in mm_init() where it's guaranteed that jump_label_init() has been called, regardless of architecture. [[email protected]: export _debug_pagealloc_enabled_early] Link: http://lkml.kernel.org/r/[email protected] Link: http://lkml.kernel.org/r/[email protected] Fixes: 96a2b03f281d ("mm, debug_pagelloc: use static keys to enable debugging") Signed-off-by: Vlastimil Babka <[email protected]> Signed-off-by: Stephen Rothwell <[email protected]> Cc: Joonsoo Kim <[email protected]> Cc: "Kirill A. Shutemov" <[email protected]> Cc: Michal Hocko <[email protected]> Cc: Vlastimil Babka <[email protected]> Cc: Matthew Wilcox <[email protected]> Cc: Mel Gorman <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Qian Cai <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2020-01-13mm: memcg/slab: fix percpu slab vmstats flushingRoman Gushchin2-31/+11
Currently slab percpu vmstats are flushed twice: during the memcg offlining and just before freeing the memcg structure. Each time percpu counters are summed, added to the atomic counterparts and propagated up by the cgroup tree. The second flushing is required due to how recursive vmstats are implemented: counters are batched in percpu variables on a local level, and once a percpu value is crossing some predefined threshold, it spills over to atomic values on the local and each ascendant levels. It means that without flushing some numbers cached in percpu variables will be dropped on floor each time a cgroup is destroyed. And with uptime the error on upper levels might become noticeable. The first flushing aims to make counters on ancestor levels more precise. Dying cgroups may resume in the dying state for a long time. After kmem_cache reparenting which is performed during the offlining slab counters of the dying cgroup don't have any chances to be updated, because any slab operations will be performed on the parent level. It means that the inaccuracy caused by percpu batching will not decrease up to the final destruction of the cgroup. By the original idea flushing slab counters during the offlining should minimize the visible inaccuracy of slab counters on the parent level. The problem is that percpu counters are not zeroed after the first flushing. So every cached percpu value is summed twice. It creates a small error (up to 32 pages per cpu, but usually less) which accumulates on parent cgroup level. After creating and destroying of thousands of child cgroups, slab counter on parent level can be way off the real value. For now, let's just stop flushing slab counters on memcg offlining. It can't be done correctly without scheduling a work on each cpu: reading and zeroing it during css offlining can race with an asynchronous update, which doesn't expect values to be changed underneath. With this change, slab counters on parent level will become eventually consistent. Once all dying children are gone, values are correct. And if not, the error is capped by 32 * NR_CPUS pages per dying cgroup. It's not perfect, as slab are reparented, so any updates after the reparenting will happen on the parent level. It means that if a slab page was allocated, a counter on child level was bumped, then the page was reparented and freed, the annihilation of positive and negative counter values will not happen until the child cgroup is released. It makes slab counters different from others, and it might want us to implement flushing in a correct form again. But it's also a question of performance: scheduling a work on each cpu isn't free, and it's an open question if the benefit of having more accurate counters is worth it. We might also consider flushing all counters on offlining, not only slab counters. So let's fix the main problem now: make the slab counters eventually consistent, so at least the error won't grow with uptime (or more precisely the number of created and destroyed cgroups). And think about the accuracy of counters separately. Link: http://lkml.kernel.org/r/[email protected] Fixes: bee07b33db78 ("mm: memcontrol: flush percpu slab vmstats on kmem offlining") Signed-off-by: Roman Gushchin <[email protected]> Acked-by: Johannes Weiner <[email protected]> Acked-by: Michal Hocko <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2020-01-13mm/shmem.c: thp, shmem: fix conflict of above-47bit hint address and PMD ↵Kirill A. Shutemov1-3/+4
alignment Shmem/tmpfs tries to provide THP-friendly mappings if huge pages are enabled. But it doesn't work well with above-47bit hint address. Normally, the kernel doesn't create userspace mappings above 47-bit, even if the machine allows this (such as with 5-level paging on x86-64). Not all user space is ready to handle wide addresses. It's known that at least some JIT compilers use higher bits in pointers to encode their information. Userspace can ask for allocation from full address space by specifying hint address (with or without MAP_FIXED) above 47-bits. If the application doesn't need a particular address, but wants to allocate from whole address space it can specify -1 as a hint address. Unfortunately, this trick breaks THP alignment in shmem/tmp: shmem_get_unmapped_area() would not try to allocate PMD-aligned area if *any* hint address specified. This can be fixed by requesting the aligned area if the we failed to allocated at user-specified hint address. The request with inflated length will also take the user-specified hint address. This way we will not lose an allocation request from the full address space. [[email protected]: fold in a fixup] Link: http://lkml.kernel.org/r/20191223231309.t6bh5hkbmokihpfu@box Link: http://lkml.kernel.org/r/[email protected] Fixes: b569bab78d8d ("x86/mm: Prepare to expose larger address space to userspace") Signed-off-by: Kirill A. Shutemov <[email protected]> Cc: "Willhalm, Thomas" <[email protected]> Cc: Dan Williams <[email protected]> Cc: "Bruggeman, Otto G" <[email protected]> Cc: "Aneesh Kumar K . V" <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2020-01-13mm/huge_memory.c: thp: fix conflict of above-47bit hint address and PMD ↵Kirill A. Shutemov1-14/+24
alignment Patch series "Fix two above-47bit hint address vs. THP bugs". The two get_unmapped_area() implementations have to be fixed to provide THP-friendly mappings if above-47bit hint address is specified. This patch (of 2): Filesystems use thp_get_unmapped_area() to provide THP-friendly mappings. For DAX in particular. Normally, the kernel doesn't create userspace mappings above 47-bit, even if the machine allows this (such as with 5-level paging on x86-64). Not all user space is ready to handle wide addresses. It's known that at least some JIT compilers use higher bits in pointers to encode their information. Userspace can ask for allocation from full address space by specifying hint address (with or without MAP_FIXED) above 47-bits. If the application doesn't need a particular address, but wants to allocate from whole address space it can specify -1 as a hint address. Unfortunately, this trick breaks thp_get_unmapped_area(): the function would not try to allocate PMD-aligned area if *any* hint address specified. Modify the routine to handle it correctly: - Try to allocate the space at the specified hint address with length padding required for PMD alignment. - If failed, retry without length padding (but with the same hint address); - If the returned address matches the hint address return it. - Otherwise, align the address as required for THP and return. The user specified hint address is passed down to get_unmapped_area() so above-47bit hint address will be taken into account without breaking alignment requirements. Link: http://lkml.kernel.org/r/[email protected] Fixes: b569bab78d8d ("x86/mm: Prepare to expose larger address space to userspace") Signed-off-by: Kirill A. Shutemov <[email protected]> Reported-by: Thomas Willhalm <[email protected]> Tested-by: Dan Williams <[email protected]> Cc: "Aneesh Kumar K . V" <[email protected]> Cc: "Bruggeman, Otto G" <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2020-01-13mm/memory_hotplug: don't free usage map when removing a re-added early sectionDavid Hildenbrand1-1/+8
When we remove an early section, we don't free the usage map, as the usage maps of other sections are placed into the same page. Once the section is removed, it is no longer an early section (especially, the memmap is freed). When we re-add that section, the usage map is reused, however, it is no longer an early section. When removing that section again, we try to kfree() a usage map that was allocated during early boot - bad. Let's check against PageReserved() to see if we are dealing with an usage map that was allocated during boot. We could also check against !(PageSlab(usage_page) || PageCompound(usage_page)), but PageReserved() is cleaner. Can be triggered using memtrace under ppc64/powernv: $ mount -t debugfs none /sys/kernel/debug/ $ echo 0x20000000 > /sys/kernel/debug/powerpc/memtrace/enable $ echo 0x20000000 > /sys/kernel/debug/powerpc/memtrace/enable ------------[ cut here ]------------ kernel BUG at mm/slub.c:3969! Oops: Exception in kernel mode, sig: 5 [#1] LE PAGE_SIZE=3D64K MMU=3DHash SMP NR_CPUS=3D2048 NUMA PowerNV Modules linked in: CPU: 0 PID: 154 Comm: sh Not tainted 5.5.0-rc2-next-20191216-00005-g0be1dba7b7c0 #61 NIP kfree+0x338/0x3b0 LR section_deactivate+0x138/0x200 Call Trace: section_deactivate+0x138/0x200 __remove_pages+0x114/0x150 arch_remove_memory+0x3c/0x160 try_remove_memory+0x114/0x1a0 __remove_memory+0x20/0x40 memtrace_enable_set+0x254/0x850 simple_attr_write+0x138/0x160 full_proxy_write+0x8c/0x110 __vfs_write+0x38/0x70 vfs_write+0x11c/0x2a0 ksys_write+0x84/0x140 system_call+0x5c/0x68 ---[ end trace 4b053cbd84e0db62 ]--- The first invocation will offline+remove memory blocks. The second invocation will first add+online them again, in order to offline+remove them again (usually we are lucky and the exact same memory blocks will get "reallocated"). Tested on powernv with boot memory: The usage map will not get freed. Tested on x86-64 with DIMMs: The usage map will get freed. Using Dynamic Memory under a Power DLAPR can trigger it easily. Triggering removal (I assume after previously removed+re-added) of memory from the HMC GUI can crash the kernel with the same call trace and is fixed by this patch. Link: http://lkml.kernel.org/r/[email protected] Fixes: 326e1b8f83a4 ("mm/sparsemem: introduce a SECTION_IS_EARLY flag") Signed-off-by: David Hildenbrand <[email protected]> Tested-by: Pingfan Liu <[email protected]> Cc: Dan Williams <[email protected]> Cc: Oscar Salvador <[email protected]> Cc: Michal Hocko <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2020-01-13mm, thp: tweak reclaim/compaction effort of local-only and all-node allocationsVlastimil Babka2-22/+12
THP page faults now attempt a __GFP_THISNODE allocation first, which should only compact existing free memory, followed by another attempt that can allocate from any node using reclaim/compaction effort specified by global defrag setting and madvise. This patch makes the following changes to the scheme: - Before the patch, the first allocation relies on a check for pageblock order and __GFP_IO to prevent excessive reclaim. This however affects also the second attempt, which is not limited to single node. Instead of that, reuse the existing check for costly order __GFP_NORETRY allocations, and make sure the first THP attempt uses __GFP_NORETRY. As a side-effect, all costly order __GFP_NORETRY allocations will bail out if compaction needs reclaim, while previously they only bailed out when compaction was deferred due to previous failures. This should be still acceptable within the __GFP_NORETRY semantics. - Before the patch, the second allocation attempt (on all nodes) was passing __GFP_NORETRY. This is redundant as the check for pageblock order (discussed above) was stronger. It's also contrary to madvise(MADV_HUGEPAGE) which means some effort to allocate THP is requested. After this patch, the second attempt doesn't pass __GFP_THISNODE nor __GFP_NORETRY. To sum up, THP page faults now try the following attempts: 1. local node only THP allocation with no reclaim, just compaction. 2. for madvised VMA's or when synchronous compaction is enabled always - THP allocation from any node with effort determined by global defrag setting and VMA madvise 3. fallback to base pages on any node Link: http://lkml.kernel.org/r/[email protected] Fixes: b39d0ee2632d ("mm, page_alloc: avoid expensive reclaim when compaction may not succeed") Signed-off-by: Vlastimil Babka <[email protected]> Acked-by: Michal Hocko <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Andrea Arcangeli <[email protected]> Cc: Mel Gorman <[email protected]> Cc: "Kirill A. Shutemov" <[email protected]> Cc: David Rientjes <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2020-01-13btrfs: relocation: fix reloc_root lifespan and accessQu Wenruo1-5/+46
[BUG] There are several different KASAN reports for balance + snapshot workloads. Involved call paths include: should_ignore_root+0x54/0xb0 [btrfs] build_backref_tree+0x11af/0x2280 [btrfs] relocate_tree_blocks+0x391/0xb80 [btrfs] relocate_block_group+0x3e5/0xa00 [btrfs] btrfs_relocate_block_group+0x240/0x4d0 [btrfs] btrfs_relocate_chunk+0x53/0xf0 [btrfs] btrfs_balance+0xc91/0x1840 [btrfs] btrfs_ioctl_balance+0x416/0x4e0 [btrfs] btrfs_ioctl+0x8af/0x3e60 [btrfs] do_vfs_ioctl+0x831/0xb10 create_reloc_root+0x9f/0x460 [btrfs] btrfs_reloc_post_snapshot+0xff/0x6c0 [btrfs] create_pending_snapshot+0xa9b/0x15f0 [btrfs] create_pending_snapshots+0x111/0x140 [btrfs] btrfs_commit_transaction+0x7a6/0x1360 [btrfs] btrfs_mksubvol+0x915/0x960 [btrfs] btrfs_ioctl_snap_create_transid+0x1d5/0x1e0 [btrfs] btrfs_ioctl_snap_create_v2+0x1d3/0x270 [btrfs] btrfs_ioctl+0x241b/0x3e60 [btrfs] do_vfs_ioctl+0x831/0xb10 btrfs_reloc_pre_snapshot+0x85/0xc0 [btrfs] create_pending_snapshot+0x209/0x15f0 [btrfs] create_pending_snapshots+0x111/0x140 [btrfs] btrfs_commit_transaction+0x7a6/0x1360 [btrfs] btrfs_mksubvol+0x915/0x960 [btrfs] btrfs_ioctl_snap_create_transid+0x1d5/0x1e0 [btrfs] btrfs_ioctl_snap_create_v2+0x1d3/0x270 [btrfs] btrfs_ioctl+0x241b/0x3e60 [btrfs] do_vfs_ioctl+0x831/0xb10 [CAUSE] All these call sites are only relying on root->reloc_root, which can undergo btrfs_drop_snapshot(), and since we don't have real refcount based protection to reloc roots, we can reach already dropped reloc root, triggering KASAN. [FIX] To avoid such access to unstable root->reloc_root, we should check BTRFS_ROOT_DEAD_RELOC_TREE bit first. This patch introduces wrappers that provide the correct way to check the bit with memory barriers protection. Most callers don't distinguish merged reloc tree and no reloc tree. The only exception is should_ignore_root(), as merged reloc tree can be ignored, while no reloc tree shouldn't. [CRITICAL SECTION ANALYSIS] Although test_bit()/set_bit()/clear_bit() doesn't imply a barrier, the DEAD_RELOC_TREE bit has extra help from transaction as a higher level barrier, the lifespan of root::reloc_root and DEAD_RELOC_TREE bit are: NULL: reloc_root is NULL PTR: reloc_root is not NULL 0: DEAD_RELOC_ROOT bit not set DEAD: DEAD_RELOC_ROOT bit set (NULL, 0) Initial state __ | /\ Section A btrfs_init_reloc_root() \/ | __ (PTR, 0) reloc_root initialized /\ | | btrfs_update_reloc_root() | Section B | | (PTR, DEAD) reloc_root has been merged \/ | __ === btrfs_commit_transaction() ==================== | /\ clean_dirty_subvols() | | | Section C (NULL, DEAD) reloc_root cleanup starts \/ | __ btrfs_drop_snapshot() /\ | | Section D (NULL, 0) Back to initial state \/ Every have_reloc_root() or test_bit(DEAD_RELOC_ROOT) caller holds transaction handle, so none of such caller can cross transaction boundary. In Section A, every caller just found no DEAD bit, and grab reloc_root. In the cross section A-B, caller may get no DEAD bit, but since reloc_root is still completely valid thus accessing reloc_root is completely safe. No test_bit() caller can cross the boundary of Section B and Section C. In Section C, every caller found the DEAD bit, so no one will access reloc_root. In the cross section C-D, either caller gets the DEAD bit set, avoiding access reloc_root no matter if it's safe or not. Or caller get the DEAD bit cleared, then access reloc_root, which is already NULL, nothing will be wrong. The memory write barriers are between the reloc_root updates and bit set/clear, the pairing read side is before test_bit. Reported-by: Zygo Blaxell <[email protected]> Fixes: d2311e698578 ("btrfs: relocation: Delay reloc tree deletion after merge_reloc_roots") CC: [email protected] # 5.4+ Reviewed-by: Josef Bacik <[email protected]> Signed-off-by: Qu Wenruo <[email protected]> Reviewed-by: David Sterba <[email protected]> [ barriers ] Signed-off-by: David Sterba <[email protected]>
2020-01-13iio: imu: adis: use new `delay` structure for SPI transfer delaysAlexandru Ardelean1-9/+18
In a recent change to the SPI subsystem [1], a new `delay` struct was added to replace the `delay_usecs`. This change replaces the current `delay_usecs` with `delay` for this driver. The `spi_transfer_delay_exec()` function [in the SPI framework] makes sure that both `delay_usecs` & `delay` are used (in this order to preserve backwards compatibility). [1] commit bebcfd272df6485 ("spi: introduce `delay` field for `spi_transfer` + spi_transfer_delay_exec()") Signed-off-by: Alexandru Ardelean <[email protected]> Signed-off-by: Jonathan Cameron <[email protected]>
2020-01-13iio: adc: stm32-dfsdm: adapt sampling rate to oversampling ratioOlivier Moysan1-13/+19
Update sampling rate when oversampling ratio is changed through the IIO ABI. Signed-off-by: Olivier Moysan <[email protected]> Acked-by: Fabrice Gasnier <[email protected]> Signed-off-by: Jonathan Cameron <[email protected]>
2020-01-13iio: adc: stm32-dfsdm: fix single conversionOlivier Moysan1-0/+2
Apply data formatting to single conversion, as this is already done in continuous and trigger modes. Fixes: 102afde62937 ("iio: adc: stm32-dfsdm: manage data resolution in trigger mode") Signed-off-by: Olivier Moysan <[email protected]> Cc: <[email protected]> Acked-by: Fabrice Gasnier <[email protected]> Signed-off-by: Jonathan Cameron <[email protected]>
2020-01-13iio: st_sensors: Make use of device propertiesAndy Shevchenko10-61/+20
Device property API allows to gather device resources from different sources, such as ACPI. Convert the drivers to unleash the power of device property API. Signed-off-by: Andy Shevchenko <[email protected]> Signed-off-by: Jonathan Cameron <[email protected]>
2020-01-13iio: st_sensors: Drop redundant parameter from st_sensors_of_name_probe()Andy Shevchenko11-88/+25
Since we have access to the struct device_driver and thus to the ID table, there is no need to supply special parameters to st_sensors_of_name_probe(). Besides that we have a common API to get driver match data, there is no need to do matching separately for OF and ACPI. Taking into consideration above, simplify the ST sensors code. Signed-off-by: Andy Shevchenko <[email protected]> Signed-off-by: Jonathan Cameron <[email protected]>
2020-01-13iio: st_gyro: Correct data for LSM9DS0 gyroAndy Shevchenko1-1/+74
The commit 41c128cb25ce ("iio: st_gyro: Add lsm9ds0-gyro support") assumes that gyro in LSM9DS0 is the same as others with 0xd4 WAI ID, but datasheet tells slight different story, i.e. the first scale factor for the chip is 245 dps, and not 250 dps. Correct this by introducing a separate settings for LSM9DS0. Fixes: 41c128cb25ce ("iio: st_gyro: Add lsm9ds0-gyro support") Depends-on: 45a4e4220bf4 ("iio: gyro: st_gyro: fix L3GD20H support") Cc: Leonard Crestez <[email protected]> Cc: Lorenzo Bianconi <[email protected]> Cc: <[email protected]> Signed-off-by: Andy Shevchenko <[email protected]> Signed-off-by: Jonathan Cameron <[email protected]>
2020-01-13iio: imu: st_lsm6dsx: check return value from st_lsm6dsx_sensor_set_enableLorenzo Bianconi1-2/+5
Add missing return value check in st_lsm6dsx_read_oneshot disabling the sensor. The issue is reported by coverity with the following error: Unchecked return value: If the function returns an error value, the error value may be mistaken for a normal value. Addresses-Coverity-ID: 1446733 ("Unchecked return value") Fixes: b5969abfa8b8 ("iio: imu: st_lsm6dsx: add motion events") Fixes: 290a6ce11d93 ("iio: imu: add support to lsm6dsx driver") Signed-off-by: Lorenzo Bianconi <[email protected]> Signed-off-by: Jonathan Cameron <[email protected]>
2020-01-13Documentation/ABI: Add missed attribute for mlxreg-io sysfs interfacesVadim Pasternak1-0/+9
Add missed "cpld4_version" attribute. Fixes: 52675da1d087 ("Documentation/ABI: Add new attribute for mlxreg-io sysfs interfaces") Signed-off-by: Vadim Pasternak <[email protected]> Signed-off-by: Andy Shevchenko <[email protected]>
2020-01-13Documentation/ABI: Fix documentation inconsistency for mlxreg-io sysfs ↵Vadim Pasternak1-2/+2
interfaces Fix attribute name from "jtag_enable", which described twice to "cpld3_version", which is expected to be instead of second appearance of "jtag_enable". Fixes: 2752e34442b5 ("Documentation/ABI: Add new attribute for mlxreg-io sysfs interfaces") Signed-off-by: Vadim Pasternak <[email protected]> Signed-off-by: Andy Shevchenko <[email protected]>
2020-01-13netfilter: arp_tables: init netns pointer in xt_tgdtor_param structFlorian Westphal1-9/+10
An earlier commit (1b789577f655060d98d20e, "netfilter: arp_tables: init netns pointer in xt_tgchk_param struct") fixed missing net initialization for arptables, but turns out it was incomplete. We can get a very similar struct net NULL deref during error unwinding: general protection fault: 0000 [#1] PREEMPT SMP KASAN RIP: 0010:xt_rateest_put+0xa1/0x440 net/netfilter/xt_RATEEST.c:77 xt_rateest_tg_destroy+0x72/0xa0 net/netfilter/xt_RATEEST.c:175 cleanup_entry net/ipv4/netfilter/arp_tables.c:509 [inline] translate_table+0x11f4/0x1d80 net/ipv4/netfilter/arp_tables.c:587 do_replace net/ipv4/netfilter/arp_tables.c:981 [inline] do_arpt_set_ctl+0x317/0x650 net/ipv4/netfilter/arp_tables.c:1461 Also init the netns pointer in xt_tgdtor_param struct. Fixes: add67461240c1d ("netfilter: add struct net * to target parameters") Reported-by: [email protected] Signed-off-by: Florian Westphal <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2020-01-13Merge tag 'sunxi-clk-fixes-for-5.5' of ↵Stephen Boyd5-37/+12
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into clk-fixes Pull Allwinner clk fixes from Maxime Ripard: Our usual set of fixes for Allwinner, to fix the number of reported clocks on the v3s, fixing the external clock on the R40, and some fixes for the AR100 co-processor clocks. * tag 'sunxi-clk-fixes-for-5.5' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: clk: sunxi-ng: h6-r: Fix AR100/R_APB2 parent order clk: sunxi-ng: h6-r: Simplify R_APB1 clock definition clk: sunxi-ng: sun8i-r: Fix divider on APB0 clock clk: sunxi-ng: r40: Allow setting parent rate for external clock outputs clk: sunxi-ng: v3s: Fix incorrect number of hw_clks.
2020-01-13netfilter: fix a use-after-free in mtype_destroy()Cong Wang1-1/+1
map->members is freed by ip_set_free() right before using it in mtype_ext_cleanup() again. So we just have to move it down. Reported-by: [email protected] Fixes: 40cd63bf33b2 ("netfilter: ipset: Support extensions which need a per data destroy function") Acked-by: Jozsef Kadlecsik <[email protected]> Signed-off-by: Cong Wang <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2020-01-13irqchip/ingenic: Get rid of the legacy IRQ domainPaul Cercueil1-4/+2
Get rid of the legacy IRQ domain and hardcoded IRQ base, since all the Ingenic drivers and platform code have been updated to use devicetree. This also fixes the kernel being flooded with messages like: irq: interrupt-controller@10001000 didn't like hwirq-0x0 to VIRQ8 mapping (rc=-19) Fixes: 8bc7464b5140 ("irqchip: ingenic: Alloc generic chips from IRQ domain"). Signed-off-by: Paul Cercueil <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Tested-by: H. Nikolaus Schaller <[email protected]> Tested-by: 周琰杰 (Zhou Yanjie) <[email protected]> Acked-by: Marc Zyngier <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-01-13USB: serial: option: Add support for Quectel RM500QKristian Evensen1-0/+4
RM500Q is a 5G module from Quectel, supporting both standalone and non-standalone modes. Unlike other recent Quectel modems, it is possible to identify the diagnostic interface (bInterfaceProtocol is unique). Thus, there is no need to check for the number of endpoints or reserve interfaces. The interface number is still dynamic though, so matching on interface number is not possible and two entries have to be added to the table. Output from usb-devices with all interfaces enabled (order is diag, nmea, at_port, modem, rmnet and adb): Bus 004 Device 007: ID 2c7c:0800 Quectel Wireless Solutions Co., Ltd. Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 3.20 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 9 idVendor 0x2c7c Quectel Wireless Solutions Co., Ltd. idProduct 0x0800 bcdDevice 4.14 iManufacturer 1 Quectel iProduct 2 LTE-A Module iSerial 3 40046d60 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 328 bNumInterfaces 6 bConfigurationValue 1 iConfiguration 4 DIAG_SER_RMNET bmAttributes 0xa0 (Bus Powered) Remote Wakeup MaxPower 224mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 48 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 ** UNRECOGNIZED: 05 24 00 10 01 ** UNRECOGNIZED: 05 24 01 00 00 ** UNRECOGNIZED: 04 24 02 02 ** UNRECOGNIZED: 05 24 06 00 00 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x000a 1x 10 bytes bInterval 9 bMaxBurst 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 2 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 ** UNRECOGNIZED: 05 24 00 10 01 ** UNRECOGNIZED: 05 24 01 00 00 ** UNRECOGNIZED: 04 24 02 02 ** UNRECOGNIZED: 05 24 06 00 00 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x85 EP 5 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x000a 1x 10 bytes bInterval 9 bMaxBurst 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x84 EP 4 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x03 EP 3 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 3 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 ** UNRECOGNIZED: 05 24 00 10 01 ** UNRECOGNIZED: 05 24 01 00 00 ** UNRECOGNIZED: 04 24 02 02 ** UNRECOGNIZED: 05 24 06 00 00 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x87 EP 7 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x000a 1x 10 bytes bInterval 9 bMaxBurst 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x86 EP 6 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x04 EP 4 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 4 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 5 CDEV Serial Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x88 EP 8 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0008 1x 8 bytes bInterval 9 bMaxBurst 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x8e EP 14 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 6 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x0f EP 15 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 2 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 5 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 66 bInterfaceProtocol 1 iInterface 6 ADB Interface Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x05 EP 5 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x89 EP 9 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Binary Object Store Descriptor: bLength 5 bDescriptorType 15 wTotalLength 42 bNumDeviceCaps 3 USB 2.0 Extension Device Capability: bLength 7 bDescriptorType 16 bDevCapabilityType 2 bmAttributes 0x00000006 Link Power Management (LPM) Supported SuperSpeed USB Device Capability: bLength 10 bDescriptorType 16 bDevCapabilityType 3 bmAttributes 0x00 wSpeedsSupported 0x000f Device can operate at Low Speed (1Mbps) Device can operate at Full Speed (12Mbps) Device can operate at High Speed (480Mbps) Device can operate at SuperSpeed (5Gbps) bFunctionalitySupport 1 Lowest fully-functional device speed is Full Speed (12Mbps) bU1DevExitLat 1 micro seconds bU2DevExitLat 500 micro seconds ** UNRECOGNIZED: 14 10 0a 00 01 00 00 00 00 11 00 00 30 40 0a 00 b0 40 0a 00 Device Status: 0x0000 (Bus Powered) Signed-off-by: Kristian Evensen <[email protected]> Cc: stable <[email protected]> Signed-off-by: Johan Hovold <[email protected]>
2020-01-13ASoC: msm8916-wcd-digital: Reset RX interpolation path after useStephan Gerhold1-0/+6
For some reason, attempting to route audio through QDSP6 on MSM8916 causes the RX interpolation path to get "stuck" after playing audio a few times. In this situation, the analog codec part is still working, but the RX path in the digital codec stops working, so you only hear the analog parts powering up. After a reboot everything works again. So far I was not able to reproduce the problem when using lpass-cpu. The downstream kernel driver avoids this by resetting the RX interpolation path after use. In mainline we do something similar for the TX decimator (LPASS_CDC_CLK_TX_RESET_B1_CTL), but the interpolator reset (LPASS_CDC_CLK_RX_RESET_CTL) got lost when the msm8916-wcd driver was split into analog and digital. Fix this problem by adding the reset to msm8916_wcd_digital_enable_interpolator(). Fixes: 150db8c5afa1 ("ASoC: codecs: Add msm8916-wcd digital codec") Cc: Srinivas Kandagatla <[email protected]> Signed-off-by: Stephan Gerhold <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2020-01-13ASoC: msm8916-wcd-analog: Fix MIC BIAS Internal1Stephan Gerhold1-3/+13
MIC BIAS Internal1 is broken at the moment because we always enable the internal rbias resistor to the TX2 line (connected to the headset microphone), rather than enabling the resistor connected to TX1. Move the RBIAS code to pm8916_wcd_analog_enable_micbias_int1/2() to fix this. Fixes: 585e881e5b9e ("ASoC: codecs: Add msm8916-wcd analog codec") Cc: Srinivas Kandagatla <[email protected]> Signed-off-by: Stephan Gerhold <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2020-01-13ASoC: cros_ec_codec: Make the device acpi compatibleYu-Hsuan Hsu1-0/+8
Add ACPI entry for cros_ec_codec. Signed-off-by: Yu-Hsuan Hsu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2020-01-13ASoC: sti: fix possible sleep-in-atomicArnaud Pouliquen1-3/+4
Change mutex and spinlock management to avoid sleep in atomic issue. Signed-off-by: Arnaud Pouliquen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2020-01-13ASoC: msm8916-wcd-analog: Fix selected events for MIC BIAS External1Stephan Gerhold1-2/+2
MIC BIAS External1 sets pm8916_wcd_analog_enable_micbias_ext1() as event handler, which ends up in pm8916_wcd_analog_enable_micbias_ext(). But pm8916_wcd_analog_enable_micbias_ext() only handles the POST_PMU event, which is not specified in the event flags for MIC BIAS External1. This means that the code in the event handler is never actually run. Set SND_SOC_DAPM_POST_PMU as the only event for the handler to fix this. Fixes: 585e881e5b9e ("ASoC: codecs: Add msm8916-wcd analog codec") Cc: Srinivas Kandagatla <[email protected]> Signed-off-by: Stephan Gerhold <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2020-01-13ASoC: hdac_hda: Fix error in driver removal after failed probeKai Vehmanen1-1/+3
In case system has multiple HDA codecs, and codec probe fails for at least one but not all codecs, driver will end up cancelling a non-initialized timer context upon driver removal. Call trace of typical case: [ 60.593646] WARNING: CPU: 1 PID: 1147 at kernel/workqueue.c:3032 __flush_work+0x18b/0x1a0 [...] [ 60.593670] __cancel_work_timer+0x11f/0x1a0 [ 60.593673] hdac_hda_dev_remove+0x25/0x30 [snd_soc_hdac_hda] [ 60.593674] device_release_driver_internal+0xe0/0x1c0 [ 60.593675] bus_remove_device+0xd6/0x140 [ 60.593677] device_del+0x175/0x3e0 [ 60.593679] ? widget_tree_free.isra.7+0x90/0xb0 [snd_hda_core] [ 60.593680] snd_hdac_device_unregister+0x34/0x50 [snd_hda_core] [ 60.593682] snd_hdac_ext_bus_device_remove+0x2a/0x60 [snd_hda_ext_core] [ 60.593684] hda_dsp_remove+0x26/0x100 [snd_sof_intel_hda_common] [ 60.593686] snd_sof_device_remove+0x84/0xa0 [snd_sof] [ 60.593687] sof_pci_remove+0x10/0x30 [snd_sof_pci] [ 60.593689] pci_device_remove+0x36/0xb0 Signed-off-by: Kai Vehmanen <[email protected]> Signed-off-by: Pierre-Louis Bossart <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2020-01-13ASoC: SOF: Intel: fix HDA codec driver probe with multiple controllersKai Vehmanen1-7/+12
In case system has multiple HDA controllers, it can happen that same HDA codec driver is used for codecs of multiple controllers. In this case, SOF may fail to probe the HDA driver and SOF initialization fails. SOF HDA code currently relies that a call to request_module() will also run device matching logic to attach driver to the codec instance. However if driver for another HDA controller was already loaded and it already loaded the HDA codec driver, this breaks current logic in SOF. In this case the request_module() SOF does becomes a no-op and HDA Codec driver is not attached to the codec instance sitting on the HDA bus SOF is controlling. Typical scenario would be a system with both external and internal GPUs, with driver of the external GPU loaded first. Fix this by adding similar logic as is used in legacy HDA driver where an explicit device_attach() call is done after request_module(). Also add logic to propagate errors reported by device_attach() back to caller. This also works in the case where drivers are not built as modules. Signed-off-by: Kai Vehmanen <[email protected]> Signed-off-by: Pierre-Louis Bossart <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.