| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Commit acf8dd0a9d0b ("udp: only allow UFO for packets from SOCK_DGRAM
sockets") disallows UFO for packets sent from raw sockets. We need to do
the same also for SOCK_DGRAM sockets with SO_NO_CHECK options, even if
for a bit different reason: while such socket would override the
CHECKSUM_PARTIAL set by ip_ufo_append_data(), gso_size is still set and
bad offloading flags warning is triggered in __skb_gso_segment().
In the IPv6 case, SO_NO_CHECK option is ignored but we need to disallow
UFO for packets sent by sockets with UDP_NO_CHECK6_TX option.
Signed-off-by: Michal Kubecek <[email protected]>
Tested-by: Shannon Nelson <[email protected]>
Acked-by: Hannes Frederic Sowa <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Fix possible null pointer dereference that may occur when calling
skb_reserve() on a null skb.
Fixes: 879c7220e82 ("net: pktgen: Observe needed_headroom of the device")
Signed-off-by: John Fastabend <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf updates from Ingo Molnar:
"Kernel side changes:
- Intel Knights Landing support. (Harish Chegondi)
- Intel Broadwell-EP uncore PMU support. (Kan Liang)
- Core code improvements. (Peter Zijlstra.)
- Event filter, LBR and PEBS fixes. (Stephane Eranian)
- Enable cycles:pp on Intel Atom. (Stephane Eranian)
- Add cycles:ppp support for Skylake. (Andi Kleen)
- Various x86 NMI overhead optimizations. (Andi Kleen)
- Intel PT enhancements. (Takao Indoh)
- AMD cache events fix. (Vince Weaver)
Tons of tooling changes:
- Show random perf tool tips in the 'perf report' bottom line
(Namhyung Kim)
- perf report now defaults to --group if the perf.data file has
grouped events, try it with:
# perf record -e '{cycles,instructions}' -a sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 1.093 MB perf.data (1247 samples) ]
# perf report
# Samples: 1K of event 'anon group { cycles, instructions }'
# Event count (approx.): 1955219195
#
# Overhead Command Shared Object Symbol
2.86% 0.22% swapper [kernel.kallsyms] [k] intel_idle
1.05% 0.33% firefox libxul.so [.] js::SetObjectElement
1.05% 0.00% kworker/0:3 [kernel.kallsyms] [k] gen6_ring_get_seqno
0.88% 0.17% chrome chrome [.] 0x0000000000ee27ab
0.65% 0.86% firefox libxul.so [.] js::ValueToId<(js::AllowGC)1>
0.64% 0.23% JS Helper libxul.so [.] js::SplayTree<js::jit::LiveRange*, js::jit::LiveRange>::splay
0.62% 1.27% firefox libxul.so [.] js::GetIterator
0.61% 1.74% firefox libxul.so [.] js::NativeSetProperty
0.61% 0.31% firefox libxul.so [.] js::SetPropertyByDefining
- Introduce the 'perf stat record/report' workflow:
Generate perf.data files from 'perf stat', to tap into the
scripting capabilities perf has instead of defining a 'perf stat'
specific scripting support to calculate event ratios, etc.
Simple example:
$ perf stat record -e cycles usleep 1
Performance counter stats for 'usleep 1':
1,134,996 cycles
0.000670644 seconds time elapsed
$ perf stat report
Performance counter stats for '/home/acme/bin/perf stat record -e cycles usleep 1':
1,134,996 cycles
0.000670644 seconds time elapsed
$
It generates PERF_RECORD_ userspace records to store the details:
$ perf report -D | grep PERF_RECORD
0xf0 [0x28]: PERF_RECORD_THREAD_MAP nr: 1 thread: 27637
0x118 [0x12]: PERF_RECORD_CPU_MAP nr: 1 cpu: 65535
0x12a [0x40]: PERF_RECORD_STAT_CONFIG
0x16a [0x30]: PERF_RECORD_STAT
-1 -1 0x19a [0x40]: PERF_RECORD_MMAP -1/0: [0xffffffff81000000(0x1f000000) @ 0xffffffff81000000]: x [kernel.kallsyms]_text
0x1da [0x18]: PERF_RECORD_STAT_ROUND
[acme@ssdandy linux]$
An effort was made to make perf.data files generated like this to
not generate cryptic messages when processed by older tools.
The 'perf script' bits need rebasing, will go up later.
- Make command line options always available, even when they depend
on some feature being enabled, warning the user about use of such
options (Wang Nan)
- Support hw breakpoint events (mem:0xAddress) in the default output
mode in 'perf script' (Wang Nan)
- Fixes and improvements for supporting annotating ARM binaries,
support ARM call and jump instructions, more work needed to have
arch specific stuff separated into tools/perf/arch/*/annotate/
(Russell King)
- Add initial 'perf config' command, for now just with a --list
command to the contents of the configuration file in use and a
basic man page describing its format, commands for doing edits and
detailed documentation are being reviewed and proof-read. (Taeung
Song)
- Allows BPF scriptlets specify arguments to be fetched using DWARF
info, using a prologue generated at compile/build time (He Kuang,
Wang Nan)
- Allow attaching BPF scriptlets to module symbols (Wang Nan)
- Allow attaching BPF scriptlets to userspace code using uprobe (Wang
Nan)
- BPF programs now can specify 'perf probe' tunables via its section
name, separating key=val values using semicolons (Wang Nan)
Testing some of these new BPF features:
Use case: get callchains when receiving SSL packets, filter then in the
kernel, at arbitrary place.
# cat ssl.bpf.c
#define SEC(NAME) __attribute__((section(NAME), used))
struct pt_regs;
SEC("func=__inet_lookup_established hnum")
int func(struct pt_regs *ctx, int err, unsigned short port)
{
return err == 0 && port == 443;
}
char _license[] SEC("license") = "GPL";
int _version SEC("version") = LINUX_VERSION_CODE;
#
# perf record -a -g -e ssl.bpf.c
^C[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.787 MB perf.data (3 samples) ]
# perf script | head -30
swapper 0 [000] 58783.268118: perf_bpf_probe:func: (ffffffff816a0f60) hnum=0x1bb
8a0f61 __inet_lookup_established (/lib/modules/4.3.0+/build/vmlinux)
896def ip_rcv_finish (/lib/modules/4.3.0+/build/vmlinux)
8976c2 ip_rcv (/lib/modules/4.3.0+/build/vmlinux)
855eba __netif_receive_skb_core (/lib/modules/4.3.0+/build/vmlinux)
8565d8 __netif_receive_skb (/lib/modules/4.3.0+/build/vmlinux)
8572a8 process_backlog (/lib/modules/4.3.0+/build/vmlinux)
856b11 net_rx_action (/lib/modules/4.3.0+/build/vmlinux)
2a284b __do_softirq (/lib/modules/4.3.0+/build/vmlinux)
2a2ba3 irq_exit (/lib/modules/4.3.0+/build/vmlinux)
96b7a4 do_IRQ (/lib/modules/4.3.0+/build/vmlinux)
969807 ret_from_intr (/lib/modules/4.3.0+/build/vmlinux)
2dede5 cpu_startup_entry (/lib/modules/4.3.0+/build/vmlinux)
95d5bc rest_init (/lib/modules/4.3.0+/build/vmlinux)
1163ffa start_kernel ([kernel.vmlinux].init.text)
11634d7 x86_64_start_reservations ([kernel.vmlinux].init.text)
1163623 x86_64_start_kernel ([kernel.vmlinux].init.text)
qemu-system-x86 9178 [003] 58785.792417: perf_bpf_probe:func: (ffffffff816a0f60) hnum=0x1bb
8a0f61 __inet_lookup_established (/lib/modules/4.3.0+/build/vmlinux)
896def ip_rcv_finish (/lib/modules/4.3.0+/build/vmlinux)
8976c2 ip_rcv (/lib/modules/4.3.0+/build/vmlinux)
855eba __netif_receive_skb_core (/lib/modules/4.3.0+/build/vmlinux)
8565d8 __netif_receive_skb (/lib/modules/4.3.0+/build/vmlinux)
856660 netif_receive_skb_internal (/lib/modules/4.3.0+/build/vmlinux)
8566ec netif_receive_skb_sk (/lib/modules/4.3.0+/build/vmlinux)
430a br_handle_frame_finish ([bridge])
48bc br_handle_frame ([bridge])
855f44 __netif_receive_skb_core (/lib/modules/4.3.0+/build/vmlinux)
8565d8 __netif_receive_skb (/lib/modules/4.3.0+/build/vmlinux)
#
- Use 'perf probe' various options to list functions, see what
variables can be collected at any given point, experiment first
collecting without a filter, then filter, use it together with
'perf trace', 'perf top', with or without callchains, if it
explodes, please tell us!
- Introduce a new callchain mode: "folded", that will list per line
representations of all callchains for a give histogram entry,
facilitating 'perf report' output processing by other tools, such
as Brendan Gregg's flamegraph tools (Namhyung Kim)
E.g:
# perf report | grep -v ^# | head
18.37% 0.00% swapper [kernel.kallsyms] [k] cpu_startup_entry
|
---cpu_startup_entry
|
|--12.07%--start_secondary
|
--6.30%--rest_init
start_kernel
x86_64_start_reservations
x86_64_start_kernel
#
Becomes, in "folded" mode:
# perf report -g folded | grep -v ^# | head -5
18.37% 0.00% swapper [kernel.kallsyms] [k] cpu_startup_entry
12.07% cpu_startup_entry;start_secondary
6.30% cpu_startup_entry;rest_init;start_kernel;x86_64_start_reservations;x86_64_start_kernel
16.90% 0.00% swapper [kernel.kallsyms] [k] call_cpuidle
11.23% call_cpuidle;cpu_startup_entry;start_secondary
5.67% call_cpuidle;cpu_startup_entry;rest_init;start_kernel;x86_64_start_reservations;x86_64_start_kernel
16.90% 0.00% swapper [kernel.kallsyms] [k] cpuidle_enter
11.23% cpuidle_enter;call_cpuidle;cpu_startup_entry;start_secondary
5.67% cpuidle_enter;call_cpuidle;cpu_startup_entry;rest_init;start_kernel;x86_64_start_reservations;x86_64_start_kernel
15.12% 0.00% swapper [kernel.kallsyms] [k] cpuidle_enter_state
#
The user can also select one of "count", "period" or "percent" as
the first column.
... and lots of infrastructure enhancements, plus fixes and other
changes, features I failed to list - see the shortlog and the git log
for details"
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (271 commits)
perf evlist: Add --trace-fields option to show trace fields
perf record: Store data mmaps for dwarf unwind
perf libdw: Check for mmaps also in MAP__VARIABLE tree
perf unwind: Check for mmaps also in MAP__VARIABLE tree
perf unwind: Use find_map function in access_dso_mem
perf evlist: Remove perf_evlist__(enable|disable)_event functions
perf evlist: Make perf_evlist__open() open evsels with their cpus and threads (like perf record does)
perf report: Show random usage tip on the help line
perf hists: Export a couple of hist functions
perf diff: Use perf_hpp__register_sort_field interface
perf tools: Add overhead/overhead_children keys defaults via string
perf tools: Remove list entry from struct sort_entry
perf tools: Include all tools/lib directory for tags/cscope/TAGS targets
perf script: Align event name properly
perf tools: Add missing headers in perf's MANIFEST
perf tools: Do not show trace command if it's not compiled in
perf report: Change default to use event group view
perf top: Decay periods in callchains
tools lib: Move bitmap.[ch] from tools/perf/ to tools/{lib,include}/
tools lib: Sync tools/lib/find_bit.c with the kernel
...
|
|
Daniel Borkmann says:
====================
BPF update
This set adds IPv6 support for bpf_skb_{set,get}_tunnel_key() helper.
It also exports flags to user space that are being used in helpers and
weren't exported thus far. For more details, please see the individual
patches.
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
After IPv6 support has recently been added to metadata dst and related
encaps, add support for populating/reading it from an eBPF program.
Commit d3aa45ce6b ("bpf: add helpers to access tunnel metadata") started
with initial IPv4-only support back then (due to IPv6 metadata support
not being available yet).
To stay compatible with older programs, we need to test for the passed
structure size. Also TOS and TTL support from the ip_tunnel_info key has
been added. Tested with vxlan devs in collect meta data mode with IPv4,
IPv6 and in compat mode over different network namespaces.
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Alexei Starovoitov <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Export flags used by eBPF helper functions through UAPI, so they can be
used by programs (instead of them redefining all flags each time or just
using the hard-coded values). It also gives a better overview what flags
are used where and we can further get rid of the extra macros defined in
filter.c. Moreover, reject invalid flags.
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Alexei Starovoitov <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Sergei Shtylyov says:
====================
Fix some dubious code in the Renesas Ethernet drivers
Here's a set of 2 patches against DaveM's 'net.git' repo. While initializing
EMAC the code tries to respect the duplex mode both programmed into ECMR and
stored in its own private data -- this just can't be right.
[1/2] ravb: stop reading ECMR in ravb_emac_init()
[2/2] sh_eth: stop reading ECMR in sh_eth_dev_init()
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
The code in sh_eth_dev_init() twiddling the ECMR bits always looked a bit
strange to me: if one intends to respect 'mdp->duplex', why save old value
of the ECMR.DM bit? As all the other bits are zeroed anyway, we don't really
need to read ECMR before writing to it.
Signed-off-by: Sergei Shtylyov <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The code in ravb_emac_init() twiddling the ECMR bits always looked a bit
strange to me: if one intends to respect 'priv->duplex', why save old value
of the ECMR.DM bit? As all the other bits are zeroed anyway, we don't
really need to read ECMR before writing to it.
Signed-off-by: Sergei Shtylyov <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
only when user space passes the addresses should we consider their
presence
Signed-off-by: Jamal Hadi Salim <[email protected]>
Acked-by: Jiri Pirko <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
For tcp_yeah, use an ssthresh floor of 2, the same floor used by Reno
and CUBIC, per RFC 5681 (equation 4).
tcp_yeah_ssthresh() was sometimes returning a 0 or negative ssthresh
value if the intended reduction is as big or bigger than the current
cwnd. Congestion control modules should never return a zero or
negative ssthresh. A zero ssthresh generally results in a zero cwnd,
causing the connection to stall. A negative ssthresh value will be
interpreted as a u32 and will set a target cwnd for PRR near 4
billion.
Oleksandr Natalenko reported that a system using tcp_yeah with ECN
could see a warning about a prior_cwnd of 0 in
tcp_cwnd_reduction(). Testing verified that this was due to
tcp_yeah_ssthresh() misbehaving in this way.
Reported-by: Oleksandr Natalenko <[email protected]>
Signed-off-by: Neal Cardwell <[email protected]>
Signed-off-by: Yuchung Cheng <[email protected]>
Signed-off-by: Eric Dumazet <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
All hists test cases forget to reset err after using it to hold an
error code. If error occure in setup_fake_machine() it incorrectly
return TEST_OK.
This patch fixes it.
Suggested-and-Acked-by: Namhyung Kim <[email protected]>
Signed-off-by: Wang Nan <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Masami Hiramatsu <[email protected]>
Cc: Zefan Li <[email protected]>
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Commit 71d6de64fedd ("perf test: Fix hist testcases when kptr_restrict is on")
solves a double free problem when 'perf test hist' calling
setup_fake_machine(). However, the result is still incorrect. For example:
$ ./perf test -v 'filtering hist entries'
25: Test filtering hist entries :
--- start ---
test child forked, pid 4186
Cannot create kernel maps
test child finished with 0
---- end ----
Test filtering hist entries: Ok
In this case the body of this test is not get executed at all, but the
result is 'Ok'.
Actually, in setup_fake_machine() there's no need to create real kernel
maps. What we want are the fake maps. This patch removes the
machine__create_kernel_maps() in setup_fake_machine(), so it won't be
affected by kptr_restrict setting.
Test result:
$ cat /proc/sys/kernel/kptr_restrict
1
$ ~/perf test -v hist
15: Test matching and linking multiple hists :
--- start ---
test child forked, pid 24031
test child finished with 0
---- end ----
Test matching and linking multiple hists: Ok
[SNIP]
Suggested-and-Acked-by: Namhyung Kim <[email protected]>
Signed-off-by: Wang Nan <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Masami Hiramatsu <[email protected]>
Cc: Zefan Li <[email protected]>
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The test-all.c file doesn't check BPF related features. For an
environment with all other features enabled, BPF would be considered
enabled without doing real feature check.
This patch adds test-bpf.c into test-all.c.
Signed-off-by: Wang Nan <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Zefan Li <[email protected]>
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
perf build is currently (v4.4-rc5) broken on powerpc:
bpf.c:28:4: error: #error __NR_bpf not defined. libbpf does not support
your arch.
# error __NR_bpf not defined. libbpf does not support your arch.
^
Fix this by including tools/scripts/Makefile.arch for the proper $ARCH
macro. While at it, remove redundant LP64 macro definition.
Also, since libbpf require $(srctree) now, detect the path of srctree
like perf.
Signed-off-by: Naveen N. Rao <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Sukadev Bhattiprolu <[email protected]>
Cc: Wang Nan <[email protected]>
Cc: Zefan Li <[email protected]>
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
[Use tools/scripts/Makefile.arch]
Signed-off-by: Wang Nan <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
After this patch other directories can use this architecture detector
without directly including it from perf's directory. Libbpf would
utilize it to get proper $(ARCH) so it can receive correct uapi include
directory.
Tested-by: Naveen N. Rao <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Sukadev Bhattiprolu <[email protected]>
Cc: Zefan Li <[email protected]>
Cc: [email protected]
Signed-off-by: Wang Nan <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
[ Add missing srctree definition in tests/make ]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Checks BPF syscall number, turn off libbpf building on platform doesn't
correctly support sys_bpf instead of blocking compiling.
Reported-and-Tested-by: Naveen N. Rao <[email protected]>
Signed-off-by: Wang Nan <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Sukadev Bhattiprolu <[email protected]>
Cc: Zefan Li <[email protected]>
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
"So we have a laundry list of locking subsystem changes:
- continuing barrier API and code improvements
- futex enhancements
- atomics API improvements
- pvqspinlock enhancements: in particular lock stealing and adaptive
spinning
- qspinlock micro-enhancements"
* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
futex: Allow FUTEX_CLOCK_REALTIME with FUTEX_WAIT op
futex: Cleanup the goto confusion in requeue_pi()
futex: Remove pointless put_pi_state calls in requeue()
futex: Document pi_state refcounting in requeue code
futex: Rename free_pi_state() to put_pi_state()
futex: Drop refcount if requeue_pi() acquired the rtmutex
locking/barriers, arch: Remove ambiguous statement in the smp_store_mb() documentation
lcoking/barriers, arch: Use smp barriers in smp_store_release()
locking/cmpxchg, arch: Remove tas() definitions
locking/pvqspinlock: Queue node adaptive spinning
locking/pvqspinlock: Allow limited lock stealing
locking/pvqspinlock: Collect slowpath lock statistics
sched/core, locking: Document Program-Order guarantees
locking, sched: Introduce smp_cond_acquire() and use it
locking/pvqspinlock, x86: Optimize the PV unlock code path
locking/qspinlock: Avoid redundant read of next pointer
locking/qspinlock: Prefetch the next node cacheline
locking/qspinlock: Use _acquire/_release() versions of cmpxchg() & xchg()
atomics: Add test for atomic operations with _relaxed variants
|
|
The spew in /proc/net/bonding/bond0 uses netif_carrier_ok() to determine
mii_status, while /sys/class/net/bond0/bonding/mii_status looks at
curr_active_slave, which doesn't actually seem to be set sometimes when
the bond actually is up. A mode 4 bond configured via ifcfg-foo files on a
Red Hat Enterprise Linux system, after boot, comes up clean and
functional, but the sysfs node shows mii_status of down, while proc shows
up. A simple enough fix here seems to be to use the same method for
determining up or down in both places, and I'd opt for the one that seems
to match reality.
CC: Jay Vosburgh <[email protected]>
CC: Veaceslav Falico <[email protected]>
CC: Andy Gospodarek <[email protected]>
CC: [email protected]
Signed-off-by: Jarod Wilson <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Dmitry Vyukov reported a use-after-free in the code expanded by the
macro debug_post_sfx, which is caused by the use of the asoc pointer
after it was freed within sctp_side_effect() scope.
This patch fixes it by allowing sctp_side_effect to clear that asoc
pointer when the TCB is freed.
As Vlad explained, we also have to cover the SCTP_DISPOSITION_ABORT case
because it will trigger DELETE_TCB too on that same loop.
Also, there were places issuing SCTP_CMD_INIT_FAILED and ASSOC_FAILED
but returning SCTP_DISPOSITION_CONSUME, which would fool the scheme
above. Fix it by returning SCTP_DISPOSITION_ABORT instead.
The macro is already prepared to handle such NULL pointer.
Reported-by: Dmitry Vyukov <[email protected]>
Signed-off-by: Marcelo Ricardo Leitner <[email protected]>
Acked-by: Vlad Yasevich <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
make_kernelsrc and make_kernelsrc_tools are skiped if a previous
build-test is done, because 'make build-test' creates two files with
same names. To avoid this, they should be included in .PHONY list.
Signed-off-by: Wang Nan <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Zefan Li <[email protected]>
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
On some system the perf-config is broken, causes link failure like this:
/usr/lib64/python2.7/config/libpython2.7.a(posixmodule.o): In function `posix_forkpty':
/opt/wangnan/yocto-build/tmp-eglibc/work/x86_64-oe-linux/python/2.7.3-r0.3.1/Python-2.7.3/./Modules/posixmodule.c:3816: undefined reference to `forkpty'
/usr/lib64/python2.7/config/libpython2.7.a(posixmodule.o): In function `posix_openpty':
/opt/wangnan/yocto-build/tmp-eglibc/work/x86_64-oe-linux/python/2.7.3-r0.3.1/Python-2.7.3/./Modules/posixmodule.c:3756: undefined reference to `openpty'
collect2: error: ld returned 1 exit status
make[1]: *** [/home/wangnan/kernel-hydrogen/tools/perf/out/perf] Error 1
make: *** [all] Error 2
$ python-config --libs
-lpthread -ldl -lpthread -lutil -lm -lpython2.7
In this case a '-lutil' should be appended to -lpython2.7.
(I know we have --start-group and --end-group. I can see them in command
line of collect2 by strace. However it doesn't work. Seems I have a
broken environment?)
Signed-off-by: Wang Nan <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Zefan Li <[email protected]>
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The vt8500 clocksource driver declares itself as capable to handle the
minimum delay of 4 cycles by passing the value into
clockevents_config_and_register(). The vt8500_timer_set_next_event()
requires the passed cycles value to be at least 16. The impact is that
userspace hangs in nanosleep() calls with small delay intervals.
This problem is reproducible in Linux 4.2 starting from:
c6eb3f70d448 ('hrtimer: Get rid of hrtimer softirq')
From Russell King, more detailed explanation:
"It's a speciality of the StrongARM/PXA hardware. It takes a certain
number of OSCR cycles for the value written to hit the compare registers.
So, if a very small delta is written (eg, the compare register is written
with a value of OSCR + 1), the OSCR will have incremented past this value
before it hits the underlying hardware. The result is, that you end up
waiting a very long time for the OSCR to wrap before the event fires.
So, we introduce a check in set_next_event() to detect this and return
-ETIME if the calculated delta is too small, which causes the generic
clockevents code to retry after adding the min_delta specified in
clockevents_config_and_register() to the current time value.
min_delta must be sufficient that we don't re-trip the -ETIME check - if
we do, we will return -ETIME, forward the next event time, try to set it,
return -ETIME again, and basically lock the system up. So, min_delta
must be larger than the check inside set_next_event(). A factor of two
was chosen to ensure that this situation would never occur.
The PXA code worked on PXA systems for years, and I'd suggest no one
changes this mechanism without access to a wide range of PXA systems,
otherwise they're risking breakage."
Cc: [email protected]
Cc: Russell King <[email protected]>
Acked-by: Alexey Charkov <[email protected]>
Signed-off-by: Roman Volkov <[email protected]>
Signed-off-by: Daniel Lezcano <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RCU updates from Ingo Molnar:
"The changes in this cycle were:
- Adding transitivity uniformly to rcu_node structure ->lock
acquisitions. (This is implemented by the first two commits on top
of v4.4-rc2 due to the pervasive nature of this change.)
- Documentation updates, including RCU requirements.
- Expedited grace-period changes.
- Miscellaneous fixes.
- Linked-list fixes, courtesy of KTSAN.
- Torture-test updates.
- Late-breaking fix to sysrq-generated crash.
One thing I should note is that these pieces of documentation are
fairly large files:
.../RCU/Design/Requirements/Requirements.html | 2897 ++++++++++++++++++++
.../RCU/Design/Requirements/Requirements.htmlx | 2741 ++++++++++++++++++
and are written in HTML, not the usual .txt style. I hope they are
fine"
Paul McKenney explains the html docs:
"For whatever it is worth, the reason for this unconventional choice
was that attempts to do the diagrams in ASCII art failed miserably.
And attempts to do ASCII art for the upcoming documentation of the
data structures failed even more miserably"
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (49 commits)
sysrq: Fix warning in sysrq generated crash.
list: Add lockless list traversal primitives
rcu: Make rcu_gp_init() be bool rather than int
rcu: Move wakeup out from under rnp->lock
rcu: Fix comment for rcu_dereference_raw_notrace
rcu: Don't redundantly disable irqs in rcu_irq_{enter,exit}()
rcu: Make cpu_needs_another_gp() be bool
rcu: Eliminate unused rcu_init_one() argument
rcu: Remove TINY_RCU bloat from pointless boot parameters
torture: Place console.log files correctly from the get-go
torture: Abbreviate console error dump
rcutorture: Print symbolic name for ->gp_state
rcutorture: Print symbolic name for rcu_torture_writer_state
rcutorture: Remove CONFIG_RCU_USER_QS from rcutorture selftest doc
rcutorture: Default grace period to three minutes, allow override
rcutorture: Dump stack when GP kthread stalls
rcutorture: Flag nonexistent RCU GP kthread
rcutorture: Add batch number to script printout
Documentation/memory-barriers.txt: Fix ACCESS_ONCE thinko
documentation: Update RCU requirements based on expedited changes
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs xattr updates from Al Viro:
"Andreas' xattr cleanup series.
It's a followup to his xattr work that went in last cycle; -0.5KLoC"
* 'work.xattr' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
xattr handlers: Simplify list operation
ocfs2: Replace list xattr handler operations
nfs: Move call to security_inode_listsecurity into nfs_listxattr
xfs: Change how listxattr generates synthetic attributes
tmpfs: listxattr should include POSIX ACL xattrs
tmpfs: Use xattr handler infrastructure
btrfs: Use xattr handler infrastructure
vfs: Distinguish between full xattr names and proper prefixes
posix acls: Remove duplicate xattr name definitions
gfs2: Remove gfs2_xattr_acl_chmod
vfs: Remove vfs_xattr_cmp
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs RCU symlink updates from Al Viro:
"Replacement of ->follow_link/->put_link, allowing to stay in RCU mode
even if the symlink is not an embedded one.
No changes since the mailbomb on Jan 1"
* 'work.symlinks' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
switch ->get_link() to delayed_call, kill ->put_link()
kill free_page_put_link()
teach nfs_get_link() to work in RCU mode
teach proc_self_get_link()/proc_thread_self_get_link() to work in RCU mode
teach shmem_get_link() to work in RCU mode
teach page_get_link() to work in RCU mode
replace ->follow_link() with new method that could stay in RCU mode
don't put symlink bodies in pagecache into highmem
namei: page_getlink() and page_follow_link_light() are the same thing
ufs: get rid of ->setattr() for symlinks
udf: don't duplicate page_symlink_inode_operations
logfs: don't duplicate page_symlink_inode_operations
switch befs long symlinks to page_symlink_operations
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs compat_ioctl fixes from Al Viro:
"This is basically Jann's patches from last week. I have _not_
included the stuff like switching i2c to ->compat_ioctl() into this
one - those need more testing.
Ideally I would like fs/compat_ioctl.c shrunk a lot, but that's a
separate story"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
compat_ioctl: don't call do_ioctl under set_fs(KERNEL_DS)
compat_ioctl: don't pass fd around when not needed
compat_ioctl: don't look up the fd twice
|
|
|
|
When we do dquot readahead in log recovery, we do not use a verifier
as the underlying buffer may not have dquots in it. e.g. the
allocation operation hasn't yet been replayed. Hence we do not want
to fail recovery because we detect an operation to be replayed has
not been run yet. This problem was addressed for inodes in commit
d891400 ("xfs: inode buffers may not be valid during recovery
readahead") but the problem was not recognised to exist for dquots
and their buffers as the dquot readahead did not have a verifier.
The result of not using a verifier is that when the buffer is then
next read to replay a dquot modification, the dquot buffer verifier
will only be attached to the buffer if *readahead is not complete*.
Hence we can read the buffer, replay the dquot changes and then add
it to the delwri submission list without it having a verifier
attached to it. This then generates warnings in xfs_buf_ioapply(),
which catches and warns about this case.
Fix this and make it handle the same readahead verifier error cases
as for inode buffers by adding a new readahead verifier that has a
write operation as well as a read operation that marks the buffer as
not done if any corruption is detected. Also make sure we don't run
readahead if the dquot buffer has been marked as cancelled by
recovery.
This will result in readahead either succeeding and the buffer
having a valid write verifier, or readahead failing and the buffer
state requiring the subsequent read to resubmit the IO with the new
verifier. In either case, this will result in the buffer always
ending up with a valid write verifier on it.
Note: we also need to fix the inode buffer readahead error handling
to mark the buffer with EIO. Brian noticed the code I copied from
there wrong during review, so fix it at the same time. Add comments
linking the two functions that handle readahead verifier errors
together so we don't forget this behavioural link in future.
cc: <[email protected]> # 3.12 - current
Signed-off-by: Dave Chinner <[email protected]>
Reviewed-by: Brian Foster <[email protected]>
Signed-off-by: Dave Chinner <[email protected]>
|
|
When we do inode readahead in log recovery, we do can do the
readahead before we've replayed the icreate transaction that stamps
the buffer with inode cores. The inode readahead verifier catches
this and marks the buffer as !done to indicate that it doesn't yet
contain valid inodes.
In adding buffer error notification (i.e. setting b_error = -EIO at
the same time as as we clear the done flag) to such a readahead
verifier failure, we can then get subsequent inode recovery failing
with this error:
XFS (dm-0): metadata I/O error: block 0xa00060 ("xlog_recover_do..(read#2)") error 5 numblks 32
This occurs when readahead completion races with icreate item replay
such as:
inode readahead
find buffer
lock buffer
submit RA io
....
icreate recovery
xfs_trans_get_buffer
find buffer
lock buffer
<blocks on RA completion>
.....
<ra completion>
fails verifier
clear XBF_DONE
set bp->b_error = -EIO
release and unlock buffer
<icreate gains lock>
icreate initialises buffer
marks buffer as done
adds buffer to delayed write queue
releases buffer
At this point, we have an initialised inode buffer that is up to
date but has an -EIO state registered against it. When we finally
get to recovering an inode in that buffer:
inode item recovery
xfs_trans_read_buffer
find buffer
lock buffer
sees XBF_DONE is set, returns buffer
sees bp->b_error is set
fail log recovery!
Essentially, we need xfs_trans_get_buf_map() to clear the error status of
the buffer when doing a lookup. This function returns uninitialised
buffers, so the buffer returned can not be in an error state and
none of the code that uses this function expects b_error to be set
on return. Indeed, there is an ASSERT(!bp->b_error); in the
transaction case in xfs_trans_get_buf_map() that would have caught
this if log recovery used transactions....
This patch firstly changes the inode readahead failure to set -EIO
on the buffer, and secondly changes xfs_buf_get_map() to never
return a buffer with an error state set so this first change doesn't
cause unexpected log recovery failures.
cc: <[email protected]> # 3.12 - current
Signed-off-by: Dave Chinner <[email protected]>
Reviewed-by: Brian Foster <[email protected]>
Signed-off-by: Dave Chinner <[email protected]>
|
|
Select CLKSRC_MMIO when FSL_FTM_TIMER is enabled. Otherwise it fails to
compile on i386 with COMPILE_TEST=y.
"
on i386:
when CLKSRC_MMIO is not enabled:
drivers/built-in.o: In function `ftm_timer_init':
fsl_ftm_timer.c:(.init.text+0x6842): undefined reference to `clocksource_mmio_readl_up'
fsl_ftm_timer.c:(.init.text+0x6855): undefined reference to `clocksource_mmio_init'
"
Reported-by: Randy Dunlap <[email protected]>
Signed-off-by: Daniel Lezcano <[email protected]>
|
|
Not every arch has io memory.
So, unbreak the build by fixing the dependencies.
Signed-off-by: Richard Weinberger <[email protected]>
Signed-off-by: Daniel Lezcano <[email protected]>
|
|
and 'spi/topic/zynq' into spi-next
|
|
'spi/topic/s3c64xx', 'spi/topic/sh-msiof' and 'spi/topic/spidev' into spi-next
|
|
'spi/topic/mtk' and 'spi/topic/omap2-mcspi' into spi-next
|
|
'spi/topic/fsl-espi' and 'spi/topic/imx' into spi-next
|
|
'spi/topic/cadence' and 'spi/topic/davinci' into spi-next
|
|
|
|
|
|
|
|
Adding missing bitmap.[ch] sources to the MANIFEST file. Fixes building
'make perf-*-src-pkg' generated tarballs.
Reported-by: Wang Nan <[email protected]>
Signed-off-by: Jiri Olsa <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Fixes: 915b0882c310 ("tools lib: Move bitmap.[ch] from tools/perf/ to tools/{lib,include}/")
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Add *.cmd files to be removed within clean target.
Reported-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Jiri Olsa <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Wang Nan <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Add *.cmd files to be removed within clean target.
Reported-and-Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Jiri Olsa <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Wang Nan <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Adding missing clean targets for following tools directories:
lib/bpf
lib/subcmd
build
This are now cleaned via 'make -C tools clean' command.
Reported-and-Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Jiri Olsa <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Wang Nan <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
There are a few discussions left with regards to this ioctl:
1) the name of the new structs will contain _v2_ on it?
2) what's the best alternative to avoid compat32 issues?
Due to that, let's postpone the addition of this new ioctl to
the next Kernel version, to give people more time to discuss it.
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
While mxl111sf may have multiple frontends, it has just one
tuner. Reflect that on the media graph.
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
Devices like mxl111sf-based WinTV Aero-m have multiple
frontends, all linked on the same demod. Currently, the
dvb_create_graph() function is not smart enough to create
multiple links. Fix it.
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
Sometimes, it is desired to create 1:n and n:1 or even
n:n links between different entities with the same
function.
This is actually needed to support DVB devices that
have multiple frontends. While we could do a function
like that internally at the DVB core, such function is
generic enough to be at media-entity, and it could be
useful on some other places.
So, add such function.
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
We should not remove the media_device until its last usage,
or we may have use after free troubles.
So, move the per-adapter media_device removal to happen at
the end of the adapter removal code.
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
Several pure digital TV devices have a frontend with the tuner
integrated on it. Add the RF connector when dvb_create_media_graph()
is called on such devices.
Tested with siano and dvb_usb_mxl111sf drivers.
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|