aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2020-03-26USB: serial: io_edgeport: fix slab-out-of-bounds read in edge_interrupt_callbackQiujun Huang1-1/+1
Fix slab-out-of-bounds read in the interrupt-URB completion handler. The boundary condition should be (length - 1) as we access data[position + 1]. Reported-and-tested-by: [email protected] Signed-off-by: Qiujun Huang <[email protected]> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable <[email protected]> Signed-off-by: Johan Hovold <[email protected]>
2020-03-26staging: rtl8723bs: hal: Compress return logicSimran Singhal1-3/+1
Simplify function returns by merging assignment and return into one command line. Found with Coccinelle @@ local idexpression ret; expression e; @@ -ret = +return e; -return ret; Signed-off-by: Simran Singhal <[email protected]> Link: https://lore.kernel.org/r/20200325214312.GA1936@simran-Inspiron-5558 Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-03-26staging: rtl8723bs: rtw_cmd: Compress lines for immediate returnSimran Singhal1-5/+1
Compress two lines into a single line if immediate return statement is found. It also removes variable cmd_obj as it is no longer needed. It is done using script Coccinelle. And coccinelle uses following semantic patch for this compression function: @@ expression ret; identifier f; @@ -ret = +return f(...); -return ret; Signed-off-by: Simran Singhal <[email protected]> Link: https://lore.kernel.org/r/20200325212253.GA8175@simran-Inspiron-5558 Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-03-26staging: rtl8723bs: rtw_efuse: Compress lines for immediate returnSimran Singhal1-4/+2
Compress two lines into a single line if immediate return statement is found. It is done using script Coccinelle. And coccinelle uses following semantic patch for this compression function: @@ expression ret; identifier f; @@ -ret = +return f(...); -return ret; Signed-off-by: Simran Singhal <[email protected]> Link: https://lore.kernel.org/r/20200325205418.GA29149@simran-Inspiron-5558 Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-03-26staging: wilc1000: remove label from examples in DT binding documentationAjay Singh1-3/+2
Remove labels and not relevant property from DT binding documentation examples as suggested in [1]. 1. https://patchwork.ozlabs.org/patch/1252837 Signed-off-by: Ajay Singh <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-03-25clk: imx: Align imx sc clock parent msg structs to 4Leonard Crestez1-1/+1
The imx SC api strongly assumes that messages are composed out of 4-bytes words but some of our message structs have odd sizeofs. This produces many oopses with CONFIG_KASAN=y. Fix by marking with __aligned(4). Fixes: 666aed2d13ee ("clk: imx: scu: add set parent support") Signed-off-by: Leonard Crestez <[email protected]> Link: https://lkml.kernel.org/r/aad021e432b3062c142973d09b766656eec18fde.1582216144.git.leonard.crestez@nxp.com Signed-off-by: Stephen Boyd <[email protected]>
2020-03-25clk: imx: Align imx sc clock msg structs to 4Leonard Crestez1-3/+3
The imx SC api strongly assumes that messages are composed out of 4-bytes words but some of our message structs have odd sizeofs. This produces many oopses with CONFIG_KASAN=y. Fix by marking with __aligned(4). Fixes: fe37b4820417 ("clk: imx: add scu clock common part") Signed-off-by: Leonard Crestez <[email protected]> Link: https://lkml.kernel.org/r/10e97a04980d933b2cfecb6b124bf9046b6e4f16.1582216144.git.leonard.crestez@nxp.com Signed-off-by: Stephen Boyd <[email protected]>
2020-03-25clk: Pass correct arguments to __clk_hw_register_gate()Stephen Boyd1-5/+5
I copy/pasted these macros and forgot to update the argument names and where they're passed to. Fix it so that these macros make sense. Reported-by: Maxime Ripard <[email protected]> Fixes: 194efb6e2667 ("clk: gate: Add support for specifying parents via DT/pointers") Signed-off-by: Stephen Boyd <[email protected]> Link: https://lkml.kernel.org/r/[email protected] Tested-by: Maxime Ripard <[email protected]>
2020-03-25Merge branch 'nvme-5.7-rc1' of git://git.infradead.org/nvme into for-5.7/driversJens Axboe16-235/+533
Pull 5.7 NVMe updates from Keith. * 'nvme-5.7-rc1' of git://git.infradead.org/nvme: (42 commits) nvme: cleanup namespace identifier reporting in nvme_init_ns_head nvme: rename __nvme_find_ns_head to nvme_find_ns_head nvme: refactor nvme_identify_ns_descs error handling nvme-tcp: Add warning on state change failure at nvme_tcp_setup_ctrl nvme-rdma: Add warning on state change failure at nvme_rdma_setup_ctrl nvme: Fix controller creation races with teardown flow nvme: Make nvme_uninit_ctrl symmetric to nvme_init_ctrl nvme: Fix ctrl use-after-free during sysfs deletion nvme-pci: Re-order nvme_pci_free_ctrl nvme: Remove unused return code from nvme_delete_ctrl_sync nvme: Use nvme_state_terminal helper nvme: release ida resources nvme: Add compat_ioctl handler for NVME_IOCTL_SUBMIT_IO nvmet-tcp: optimize tcp stack TX when data digest is used nvme-fabrics: Use scnprintf() for avoiding potential buffer overflow nvme-multipath: do not reset on unknown status nvmet-rdma: allocate RW ctxs according to mdts nvmet-rdma: Implement get_mdts controller op nvmet: Add get_mdts op for controllers nvme-pci: properly print controller address ...
2020-03-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds159-945/+2140
Pull networking fixes from David Miller: 1) Fix deadlock in bpf_send_signal() from Yonghong Song. 2) Fix off by one in kTLS offload of mlx5, from Tariq Toukan. 3) Add missing locking in iwlwifi mvm code, from Avraham Stern. 4) Fix MSG_WAITALL handling in rxrpc, from David Howells. 5) Need to hold RTNL mutex in tcindex_partial_destroy_work(), from Cong Wang. 6) Fix producer race condition in AF_PACKET, from Willem de Bruijn. 7) cls_route removes the wrong filter during change operations, from Cong Wang. 8) Reject unrecognized request flags in ethtool netlink code, from Michal Kubecek. 9) Need to keep MAC in reset until PHY is up in bcmgenet driver, from Doug Berger. 10) Don't leak ct zone template in act_ct during replace, from Paul Blakey. 11) Fix flushing of offloaded netfilter flowtable flows, also from Paul Blakey. 12) Fix throughput drop during tx backpressure in cxgb4, from Rahul Lakkireddy. 13) Don't let a non-NULL skb->dev leave the TCP stack, from Eric Dumazet. 14) TCP_QUEUE_SEQ socket option has to update tp->copied_seq as well, also from Eric Dumazet. 15) Restrict macsec to ethernet devices, from Willem de Bruijn. 16) Fix reference leak in some ethtool *_SET handlers, from Michal Kubecek. 17) Fix accidental disabling of MSI for some r8169 chips, from Heiner Kallweit. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (138 commits) net: Fix CONFIG_NET_CLS_ACT=n and CONFIG_NFT_FWD_NETDEV={y, m} build net: ena: Add PCI shutdown handler to allow safe kexec selftests/net/forwarding: define libs as TEST_PROGS_EXTENDED selftests/net: add missing tests to Makefile r8169: re-enable MSI on RTL8168c net: phy: mdio-bcm-unimac: Fix clock handling cxgb4/ptp: pass the sign of offset delta in FW CMD net: dsa: tag_8021q: replace dsa_8021q_remove_header with __skb_vlan_pop net: cbs: Fix software cbs to consider packet sending time net/mlx5e: Do not recover from a non-fatal syndrome net/mlx5e: Fix ICOSQ recovery flow with Striding RQ net/mlx5e: Fix missing reset of SW metadata in Striding RQ reset net/mlx5e: Enhance ICOSQ WQE info fields net/mlx5_core: Set IB capability mask1 to fix ib_srpt connection failure selftests: netfilter: add nfqueue test case netfilter: nft_fwd_netdev: allow to redirect to ifb via ingress netfilter: nft_fwd_netdev: validate family and chain type netfilter: nft_set_rbtree: Detect partial overlaps on insertion netfilter: nft_set_rbtree: Introduce and use nft_rbtree_interval_start() netfilter: nft_set_pipapo: Separate partial and complete overlap cases on insertion ...
2020-03-25Merge tag 'gpio-v5.6-3' of ↵Linus Torvalds2-27/+122
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO fixes from Linus Walleij: - One core quirk by myself to fix the .irq_disable() semantics when the gpiolib core takes over this callback. - The rest is an elaborate series of four patches fixing Intel laptop ACPI wakeup quirks. * tag 'gpio-v5.6-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpiolib: acpi: Add quirk to ignore EC wakeups on HP x2 10 CHT + AXP288 model gpiolib: acpi: Add quirk to ignore EC wakeups on HP x2 10 BYT + AXP288 model gpiolib: acpi: Rework honor_wakeup option into an ignore_wake option gpiolib: acpi: Correct comment for HP x2 10 honor_wakeup quirk gpiolib: Fix irq_disable() semantics
2020-03-25Merge tag 'wireless-drivers-2020-03-25' of ↵David S. Miller4-13/+27
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for v5.6 Fourth, and last, set of fixes for v5.6. Just two important fixes to iwlwifi regressions. iwlwifi * fix GEO_TX_POWER_LIMIT command on certain devices which caused firmware to crash during initialisation * add back device ids for three devices which were accidentally removed ==================== Signed-off-by: David S. Miller <[email protected]>
2020-03-26nvme: cleanup namespace identifier reporting in nvme_init_ns_headChristoph Hellwig1-12/+10
Lift the common namespace identifier reporting between the shared namespace and new nshead cases into common code. This also means one less lock is held while doing I/O. Signed-off-by: Christoph Hellwig <[email protected]> Signed-off-by: Keith Busch <[email protected]>
2020-03-26nvme: rename __nvme_find_ns_head to nvme_find_ns_headChristoph Hellwig1-2/+2
There is no non __-prefixed version, so make the name a little more readable. Signed-off-by: Christoph Hellwig <[email protected]> Signed-off-by: Keith Busch <[email protected]>
2020-03-26nvme: refactor nvme_identify_ns_descs error handlingChristoph Hellwig1-15/+13
Move the handling of an error into the function from the caller, and only do it for an actual error on the admin command itself, not the command parsing, as that should be enough to deal with devices claiming a bogus version compliance. Signed-off-by: Christoph Hellwig <[email protected]> Signed-off-by: Keith Busch <[email protected]>
2020-03-26nvme-tcp: Add warning on state change failure at nvme_tcp_setup_ctrlIsrael Rukshin1-1/+6
The transition to LIVE state should not fail in case of a new controller. Moving to DELETING state before nvme_tcp_create_ctrl() allocates all the resources may leads to NULL dereference at teardown flow (e.g., IO tagset, admin_q, connect_q). Signed-off-by: Israel Rukshin <[email protected]> Reviewed-by: Max Gurtovoy <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Signed-off-by: Keith Busch <[email protected]>
2020-03-26nvme-rdma: Add warning on state change failure at nvme_rdma_setup_ctrlIsrael Rukshin1-1/+6
The transition to LIVE state should not fail in case of a new controller. Moving to DELETING state before nvme_tcp_create_ctrl() allocates all the resources may leads to NULL dereference at teardown flow (e.g., IO tagset, admin_q, connect_q). Signed-off-by: Israel Rukshin <[email protected]> Reviewed-by: Max Gurtovoy <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Signed-off-by: Keith Busch <[email protected]>
2020-03-26nvme: Fix controller creation races with teardown flowIsrael Rukshin2-0/+6
Calling nvme_sysfs_delete() when the controller is in the middle of creation may cause several bugs. If the controller is in NEW state we remove delete_controller file and don't delete the controller. The user will not be able to use nvme disconnect command on that controller again, although the controller may be active. Other bugs may happen if the controller is in the middle of create_ctrl callback and nvme_do_delete_ctrl() starts. For example, freeing I/O tagset at nvme_do_delete_ctrl() before it was allocated at create_ctrl callback. To fix all those races don't allow the user to delete the controller before it was fully created. Signed-off-by: Israel Rukshin <[email protected]> Reviewed-by: Max Gurtovoy <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Signed-off-by: Keith Busch <[email protected]>
2020-03-26nvme: Make nvme_uninit_ctrl symmetric to nvme_init_ctrlIsrael Rukshin6-8/+2
Put the ctrl reference count at nvme_uninit_ctrl as opposed to nvme_init_ctrl which takes it. This decrease the reference count at the core layer instead of decreasing it on each transport separately. Also move the call of nvme_uninit_ctrl at PCI driver after calling to nvme_release_prp_pools and nvme_dev_unmap, in order to put the reference count after using the dev. This is safe because those functions use nvme_dev which is freed only later at nvme_pci_free_ctrl. Signed-off-by: Israel Rukshin <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Signed-off-by: Keith Busch <[email protected]>
2020-03-26nvme: Fix ctrl use-after-free during sysfs deletionIsrael Rukshin6-10/+6
In case nvme_sysfs_delete() is called by the user before taking the ctrl reference count, the ctrl may be freed during the creation and cause the bug. Take the reference as soon as the controller is externally visible, which is done by cdev_device_add() in nvme_init_ctrl(). Also take the reference count at the core layer instead of taking it on each transport separately. Signed-off-by: Israel Rukshin <[email protected]> Reviewed-by: Max Gurtovoy <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Signed-off-by: Keith Busch <[email protected]>
2020-03-26nvme-pci: Re-order nvme_pci_free_ctrlIsrael Rukshin1-2/+2
Destroy the resources in the same order like in nvme_probe error flow to improve code readability. Signed-off-by: Israel Rukshin <[email protected]> Reviewed-by: Max Gurtovoy <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Signed-off-by: Keith Busch <[email protected]>
2020-03-26nvme: Remove unused return code from nvme_delete_ctrl_syncIsrael Rukshin1-7/+2
The return code of nvme_delete_ctrl_sync is never used, so change it to void. Signed-off-by: Israel Rukshin <[email protected]> Reviewed-by: Max Gurtovoy <[email protected]> Reviewed-by: Sagi Grimberg <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Signed-off-by: Keith Busch <[email protected]>
2020-03-26nvme: Use nvme_state_terminal helperIsrael Rukshin1-2/+1
Improve code readability. Reviewed-by: Max Gurtovoy <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Signed-off-by: Israel Rukshin <[email protected]> Signed-off-by: Keith Busch <[email protected]>
2020-03-26nvme: release ida resourcesMax Gurtovoy1-0/+1
ida instances allocate some internal memory in addition to the base 'struct ida'. Use ida_destroy() to release that memory at module_exit(). Reviewed-by: Christoph Hellwig <[email protected]> Signed-off-by: Max Gurtovoy <[email protected]> Signed-off-by: Keith Busch <[email protected]>
2020-03-26nvme: Add compat_ioctl handler for NVME_IOCTL_SUBMIT_IO[email protected]1-2/+43
Currently 32 bit application gets ENOTTY when it calls compat_ioctl with NVME_IOCTL_SUBMIT_IO in 64 bit kernel. The cause is that the results of sizeof(struct nvme_user_io), which is used to define NVME_IOCTL_SUBMIT_IO, are not same between 32 bit compiler and 64 bit compiler. * 32 bit: the result of sizeof nvme_user_io is 44. * 64 bit: the result of sizeof nvme_user_io is 48. 64 bit compiler seems to add 32 bit padding for multiple of 8 bytes. This patch adds a compat_ioctl handler. The handler replaces NVME_IOCTL_SUBMIT_IO32 with NVME_IOCTL_SUBMIT_IO in case 32 bit application calls compat_ioctl for submit in 64 bit kernel. Then, it calls nvme_ioctl as usual. Reviewed-by: Christoph Hellwig <[email protected]> Signed-off-by: Masahiro Yamada (KIOXIA) <[email protected]> Signed-off-by: Keith Busch <[email protected]>
2020-03-26nvmet-tcp: optimize tcp stack TX when data digest is usedSagi Grimberg1-2/+5
If we have a 4-byte data digest to send to the wire, but we have more data to send, set MSG_MORE to tell the stack that more is coming. Reviewed-by: Mark Wunderlich <[email protected]> Signed-off-by: Sagi Grimberg <[email protected]> Signed-off-by: Keith Busch <[email protected]>
2020-03-26nvme-fabrics: Use scnprintf() for avoiding potential buffer overflowTakashi Iwai1-4/+4
Since snprintf() returns the would-be-output size instead of the actual output size, the succeeding calls may go beyond the given buffer limit. Fix it by replacing with scnprintf(). Reviewed-by: Christoph Hellwig <[email protected]> Signed-off-by: Takashi Iwai <[email protected]> Signed-off-by: Keith Busch <[email protected]>
2020-03-26nvme-multipath: do not reset on unknown statusJohn Meneghini3-18/+13
The nvme multipath error handling defaults to controller reset if the error is unknown. There are, however, no existing nvme status codes that indicate a reset should be used, and resetting causes unnecessary disruption to the rest of IO. Change nvme's error handling to first check if failover should happen. If not, let the normal error handling take over rather than reset the controller. Based-on-a-patch-by: Christoph Hellwig <[email protected]> Reviewed-by: Hannes Reinecke <[email protected]> Signed-off-by: John Meneghini <[email protected]> Signed-off-by: Keith Busch <[email protected]>
2020-03-26nvmet-rdma: allocate RW ctxs according to mdtsMax Gurtovoy1-2/+4
Current nvmet-rdma code allocates MR pool budget based on queue size, assuming both host and target use the same "max_pages_per_mr" count. After limiting the mdts value for RDMA controllers, we know the factor of maximum MR's per IO operation. Thus, make sure MR pool will be sufficient for the required IO depth and IO size. That is, say host's SQ size is 100, then the MR pool budget allocated currently at target will also be 100 MRs. But 100 IO WRITE Requests with 256 sg_count(IO size above 1MB) require 200 MRs when target's "max_pages_per_mr" is 128. Reported-by: Krishnamraju Eraparaju <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Reviewed-by: Sagi Grimberg <[email protected]> Signed-off-by: Max Gurtovoy <[email protected]>
2020-03-26nvmet-rdma: Implement get_mdts controller opMax Gurtovoy1-0/+9
Set the maximal data transfer size to be 1MB (currently mdts is unlimited). This will allow calculating the amount of MR's that one ctrl should allocate to fulfill it's capabilities. Reviewed-by: Christoph Hellwig <[email protected]> Signed-off-by: Max Gurtovoy <[email protected]>
2020-03-26nvmet: Add get_mdts op for controllersMax Gurtovoy2-2/+7
Some transports, such as RDMA, would like to set the Maximum Data Transfer Size (MDTS) according to device/port/ctrl characteristics. This will enable the transport to set the optimal MDTS according to controller needs and device capabilities. Add a new nvmet transport op that is called during ctrl identification. This will not effect transports that don't implement this option. The return value of the new op is according to the NVMe spec definition for MDTS. Reviewed-by: Christoph Hellwig <[email protected]> Reviewed-by: Sagi Grimberg <[email protected]> Signed-off-by: Max Gurtovoy <[email protected]> Signed-off-by: Israel Rukshin <[email protected]>
2020-03-26nvme-pci: properly print controller addressMax Gurtovoy1-1/+1
Align PCI address print with fabrics address that is printed with newline character. Before: [root@server40 linux]# cat /sys/class/nvme/nvme2/address 0000:0b:00.0[root@server40 linux]# After: [root@server40 linux]# cat /sys/class/nvme/nvme2/address 0000:0b:00.0 [root@server40 linux]# Reviewed-by: Christoph Hellwig <[email protected]> Signed-off-by: Max Gurtovoy <[email protected]>
2020-03-26nvme-tcp: break from io_work loop if recv failedSagi Grimberg1-0/+2
If we failed to receive data from the socket, don't try to further process it, we will for sure be handling a queue error at this point. While no issue was seen with the current behavior thus far, its safer to cease socket processing if we detected an error. Signed-off-by: Sagi Grimberg <[email protected]> Signed-off-by: Keith Busch <[email protected]>
2020-03-26nvme-tcp: move send failure to nvme_tcp_try_sendSagi Grimberg1-15/+11
Consolidate the request failure handling code to where it is being fetched (nvme_tcp_try_send). Signed-off-by: Sagi Grimberg <[email protected]> Signed-off-by: Keith Busch <[email protected]>
2020-03-26nvmet-tcp: fix maxh2cdata icresp parameterSagi Grimberg1-1/+1
MAXH2CDATA is not zero based. Also no reason to limit ourselves to 1M transfers as we can do more easily. Make this an arbitrary limit of 16M. Reported-by: Wenhua Liu <[email protected]> Cc: [email protected] # v5.0+ Signed-off-by: Sagi Grimberg <[email protected]> Signed-off-by: Keith Busch <[email protected]>
2020-03-26nvme-tcp: optimize queue io_cpu assignment for multiple queue mapsSagi Grimberg1-6/+56
Currently, queue io_cpu assignment is done sequentially for default, read and poll queues based on queue id. This causes miss-alignment between context of CPU initiating I/O and the I/O worker thread processing queued requests or completions. Change to modify queue io_cpu assignment to take into account queue maps offset. Each queue io_cpu will start at zero for each queue map. This essentially aligns read/poll queues to start over the same range as default queues. Testing performed by Mark with: - ram device (nvmet) - single CPU core (pinned) - 100% 4k reads - engine io_uring (not using sq_thread option) - hipri flag set Micro-benchmark results show a net gain of: - increase of 18%-29% in IOPs - reduction of 16%-22% in average latency - reduction of 7%-23% in 99.99% latency Baseline: ======== QDepth/Batch | IOPs [k] | Avg. Lat [us] | 99.99% Lat [us] ----------------------------------------------------------------- 1/1 | 32.4 | 30.11 | 50.94 32/8 | 179 | 168.20 | 371 CPU alignment: ============= QDepth/Batch | IOPs [k] | Avg. Lat [us] | 99.99% Lat [us] ----------------------------------------------------------------- 1/1 | 38.5 | 25.18 | 39.16 32/8 | 231 | 130.75 | 343 Reported-by: Mark Wunderlich <[email protected]> Signed-off-by: Sagi Grimberg <[email protected]> Signed-off-by: Keith Busch <[email protected]>
2020-03-26nvme-pci: Simplify nvme_poll_irqdisableKeith Busch1-19/+11
The timeout handler can use the existing nvme_poll() if it needs to check a polled queue, allowing nvme_poll_irqdisable() to handle only irq driven queues for the remaining callers. Signed-off-by: Keith Busch <[email protected]>
2020-03-26nvme-pci: Remove two-pass completionsKeith Busch1-32/+10
Completion handling had been done in two steps: find all new completions under a lock, then handle those completions outside the lock. This was done to make the locked section as short as possible so that other threads using the same lock wait less time. The driver no longer shares locks during completion, and is in fact lockless for interrupt driven queues, so the optimization no longer serves its original purpose. Replace the two-pass completion queue handler with a single pass that completes entries immediately. Reviewed-by: Sagi Grimberg <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Signed-off-by: Keith Busch <[email protected]>
2020-03-26nvme-pci: Remove tag from process cqKeith Busch1-12/+11
The only user for tagged completion was for timeout handling. That user, though, really only cares if the timed out command is completed, which we can safely check within the timeout handler. Remove the tag check to simplify completion handling. Reviewed-by: Sagi Grimberg <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Signed-off-by: Keith Busch <[email protected]>
2020-03-26nvme-pci: slimmer CQ head updateAlexey Dobriyan1-4/+2
Update CQ head with pre-increment operator. This saves subtraction of 1 and a few registers. Also update phase with "^= 1". This generates only one RMW instruction. ffffffff815ba150 <nvme_update_cq_head>: ffffffff815ba150: 0f b7 47 70 movzx eax,WORD PTR [rdi+0x70] ffffffff815ba154: 83 c0 01 add eax,0x1 ffffffff815ba157: 66 89 47 70 mov WORD PTR [rdi+0x70],ax ffffffff815ba15b: 66 3b 47 68 cmp ax,WORD PTR [rdi+0x68] ffffffff815ba15f: 74 01 je ffffffff815ba162 <nvme_update_cq_head+0x12> ffffffff815ba161: c3 ret ffffffff815ba162: 31 c0 xor eax,eax ffffffff815ba164: 80 77 74 01 ===> xor BYTE PTR [rdi+0x74],0x1 ffffffff815ba168: 66 89 47 70 mov WORD PTR [rdi+0x70],ax ffffffff815ba16c: c3 ret add/remove: 0/0 grow/shrink: 0/3 up/down: 0/-119 (-119) Function old new delta nvme_poll 690 678 -12 nvme_dev_disable 1230 1177 -53 nvme_irq 613 559 -54 Signed-off-by: Alexey Dobriyan <[email protected]>
2020-03-26nvmet: check ncqr & nsqr for set-features cmdAmit Engel1-0/+9
For set feature command when setting up NVME_FEAT_NUM_QUEUES, check Number of I/O Completion Queues Requested (NCQR) and Number of I/O Submission Queues Requested (NSQR) before we proceed, for invalid values (i.e. 65535) return an appropriate NVMe invalid field status. Signed-off-by: Amit Engel <[email protected]> Signed-off-by: Chaitanya Kulkarni <[email protected]> Reviewed-by: Sagi Grimberg <[email protected]> Signed-off-by: Keith Busch <[email protected]>
2020-03-26nvme: Check for readiness more quickly, to speed up boot timeJosh Triplett1-1/+1
After initialization, nvme_wait_ready checks for readiness every 100ms, even though the drive may be ready far sooner than that. This delays system boot by hundreds of milliseconds. Reduce the delay, checking for readiness every millisecond instead. Boot-time tests on an AWS c5.12xlarge: Before: [ 0.546936] initcall nvme_init+0x0/0x5b returned 0 after 37 usecs ... [ 0.764178] nvme nvme0: 2/0/0 default/read/poll queues [ 0.768424] nvme0n1: p1 [ 0.774132] EXT4-fs (nvme0n1p1): mounted filesystem with ordered data mode. Opts: (null) [ 0.774146] VFS: Mounted root (ext4 filesystem) on device 259:1. ... [ 0.788141] Run /sbin/init as init process After: [ 0.537088] initcall nvme_init+0x0/0x5b returned 0 after 37 usecs ... [ 0.543457] nvme nvme0: 2/0/0 default/read/poll queues [ 0.548473] nvme0n1: p1 [ 0.554339] EXT4-fs (nvme0n1p1): mounted filesystem with ordered data mode. Opts: (null) [ 0.554344] VFS: Mounted root (ext4 filesystem) on device 259:1. ... [ 0.567931] Run /sbin/init as init process Signed-off-by: Josh Triplett <[email protected]> Reviewed-by: Sagi Grimberg <[email protected]> Reviewed-by: Chaitanya Kulkarni <[email protected]> Signed-off-by: Keith Busch <[email protected]>
2020-03-26nvme: log additional message for controller statusRupesh Girase1-2/+2
Log the controller status to know more about issue if it lies within kernel nvme subsytem or controller is unhealthy. Signed-off-by: Rupesh Girase <[email protected]> Reviewed-by: Sagi Grimberg <[email protected]> Reviewed-by: Chaitanya Kulkarni <[email protected]> Signed-off-by: Keith Busch <[email protected]>
2020-03-26nvme: code cleanup nvme_identify_ns_desc()Chaitanya Kulkarni1-36/+40
The function nvme_identify_ns_desc() has 3 levels of nesting which make error message to exceeded > 80 char per line which is not aligned with the kernel code standards and rest of the NVMe subsystem code. Add a helper function to move the processing of the log when the command is successful by reducing the nesting and keeping the code < 80 char per line. Reviewed-by: Christoph Hellwig <[email protected]> Signed-off-by: Chaitanya Kulkarni <[email protected]> Signed-off-by: Keith Busch <[email protected]>
2020-03-26nvme: Don't deter users from enabling hwmon supportJean Delvare1-2/+0
I see no good reason for the "If unsure, say N" advice in the description of the NVME_HWMON configuration option. It is not dangerous, it does not select any other option, and has a fairly low overhead. As the option is already not enabled by default, further suggesting hesitant users to not enable it is not useful anyway. Unlike some other options where the description alone may not be sufficient for users to make a decision, NVME_HWMON is pretty simple to grasp in my opinion, so just let the user do what they want. Signed-off-by: Jean Delvare <[email protected]> Reviewed-by: Chaitanya Kulkarni <[email protected]> Reviewed-by: Guenter Roeck <[email protected]> Cc: Christoph Hellwig <[email protected]> Signed-off-by: Keith Busch <[email protected]>
2020-03-26nvme: expose hostid via sysfs for fabrics controllersSagi Grimberg1-0/+13
We allow userspace to connect with a custom hostid which is useful for certain use-cases. However there is is no way to tell what is the hostid used to connect to a given controller. Expose this so userspace can correlate controllers based on hostid. Signed-off-by: Sagi Grimberg <[email protected]> Reviewed-by: Chaitanya Kulkarni <[email protected]> Signed-off-by: Keith Busch <[email protected]>
2020-03-26nvme: expose hostnqn via sysfs for fabrics controllersSagi Grimberg1-0/+13
We allow userspace to connect with a custom hostnqn which is useful for certain use-cases. However there is no way to tell what is the hostnqn used to connect to a given controller. Expose this so userspace can correlate controllers based on hostnqn. Signed-off-by: Sagi Grimberg <[email protected]> Reviewed-by: Chaitanya Kulkarni <[email protected]> Signed-off-by: Keith Busch <[email protected]>
2020-03-25net: Fix CONFIG_NET_CLS_ACT=n and CONFIG_NFT_FWD_NETDEV={y, m} buildPablo Neira Ayuso10-34/+47
net/netfilter/nft_fwd_netdev.c: In function ‘nft_fwd_netdev_eval’: net/netfilter/nft_fwd_netdev.c:32:10: error: ‘struct sk_buff’ has no member named ‘tc_redirected’ pkt->skb->tc_redirected = 1; ^~ net/netfilter/nft_fwd_netdev.c:33:10: error: ‘struct sk_buff’ has no member named ‘tc_from_ingress’ pkt->skb->tc_from_ingress = 1; ^~ To avoid a direct dependency with tc actions from netfilter, wrap the redirect bits around CONFIG_NET_REDIRECT and move helpers to include/linux/skbuff.h. Turn on this toggle from the ifb driver, the only existing client of these bits in the tree. This patch adds skb_set_redirected() that sets on the redirected bit on the skbuff, it specifies if the packet was redirect from ingress and resets the timestamp (timestamp reset was originally missing in the netfilter bugfix). Fixes: bcfabee1afd99484 ("netfilter: nft_fwd_netdev: allow to redirect to ifb via ingress") Reported-by: [email protected] Reported-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-25net: ena: Add PCI shutdown handler to allow safe kexecGuilherme G. Piccoli1-10/+41
Currently ENA only provides the PCI remove() handler, used during rmmod for example. This is not called on shutdown/kexec path; we are potentially creating a failure scenario on kexec: (a) Kexec is triggered, no shutdown() / remove() handler is called for ENA; instead pci_device_shutdown() clears the master bit of the PCI device, stopping all DMA transactions; (b) Kexec reboot happens and the device gets enabled again, likely having its FW with that DMA transaction buffered; then it may trigger the (now invalid) memory operation in the new kernel, corrupting kernel memory area. This patch aims to prevent this, by implementing a shutdown() handler quite similar to the remove() one - the difference being the handling of the netdev, which is unregistered on remove(), but following the convention observed in other drivers, it's only detached on shutdown(). This prevents an odd issue in AWS Nitro instances, in which after the 2nd kexec the next one will fail with an initrd corruption, caused by a wild DMA write to invalid kernel memory. The lspci output for the adapter present in my instance is: 00:05.0 Ethernet controller [0200]: Amazon.com, Inc. Elastic Network Adapter (ENA) [1d0f:ec20] Suggested-by: Gavin Shan <[email protected]> Signed-off-by: Guilherme G. Piccoli <[email protected]> Acked-by: Sameeh Jubran <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-25selftests/net/forwarding: define libs as TEST_PROGS_EXTENDEDHangbin Liu2-15/+16
The lib files should not be defined as TEST_PROGS, or we will run them in run_kselftest.sh. Also remove ethtool_lib.sh exec permission. Fixes: 81573b18f26d ("selftests/net/forwarding: add Makefile to install tests") Signed-off-by: Hangbin Liu <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.