| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Optimize this_cpu_* functions for 64 bit by making use of new instructions
that came with the interlocked-access facility 1 (load-and-*) and the
general-instructions-extension facility (asi, agsi).
That way we get rid of the compare-and-swap loop in most cases.
Code size reduction (defconfig, -march=z196): 11,555 bytes.
Signed-off-by: Heiko Carstens <[email protected]>
Signed-off-by: Martin Schwidefsky <[email protected]>
|
|
Remove the special cases for the this_cpu_* functions for 32 bit
in order to make it easier to add additional code for 64 bit.
32 bit will use the generic implementation.
Signed-off-by: Heiko Carstens <[email protected]>
Signed-off-by: Martin Schwidefsky <[email protected]>
|
|
Make psw32_user_bits a constant value again.
This is a leftover of the code which allowed to run the kernel either
in primary or home space which got removed with 9a905662 "s390/uaccess:
always run the kernel in home space".
Signed-off-by: Heiko Carstens <[email protected]>
Signed-off-by: Martin Schwidefsky <[email protected]>
|
|
Fix the following bugs:
- When returning from a signal the signal handler copies the saved psw mask
from user space and uses parts of it. Especially it restores the RI bit
unconditionally. If however the machine doesn't support RI, or RI is
disabled for the task, the last lpswe instruction which returns to user
space will generate a specification exception.
To fix this check if the RI bit is allowed to be set and kill the task
if not.
- In the compat mode signal handler code the RI bit of the psw mask gets
propagated to the mask of the return psw: if user space enables RI in the
signal handler, RI will also be enabled after the signal handler is
finished.
This is a different behaviour than with 64 bit tasks. So change this to
match the 64 bit semantics, which restores the original RI bit value.
- Fix similar oddities within the ptrace code as well.
Reviewed-by: Martin Schwidefsky <[email protected]>
Signed-off-by: Heiko Carstens <[email protected]>
Signed-off-by: Martin Schwidefsky <[email protected]>
|
|
The FPC_VALID_MASK has been used to check the validity of the value
to be loaded into the floating-point-control register. With the
introduction of the floating-point extension facility and the
decimal-floating-point additional bits have been defined which need
to be checked in a non straight forward way. So far these bits have
been ignored which can cause an incorrect results for decimal-
floating-point operations, e.g. an incorrect rounding mode to be
set after signal return.
The static check with the FPC_VALID_MASK is replaced with a trial
load of the floating-point-control value, see test_fp_ctl.
In addition an information leak with the padding word between the
floating-point-control word and the floating-point registers in
the s390_fp_regs is fixed.
Reported-by: Heiko Carstens <[email protected]>
Reviewed-by: Heiko Carstens <[email protected]>
Signed-off-by: Martin Schwidefsky <[email protected]>
|
|
There is a debugging leftover from git commit 4d334fd155b53adf
"s390/3270: asynchronous size sensing" in raw3270_reset_device_cb.
Under z/VM the diagnose 0x210 can be used to find the correct
size of the 3270 terminal.
Signed-off-by: Martin Schwidefsky <[email protected]>
|
|
If a machine has no hardware support for the xts-aes or ctr-aes algorithms
they are not registered in aes_s390_init. But aes_s390_fini unconditionally
unregisters the algorithms which causes crypto_remove_alg to crash.
Add two flag variables to remember if xts-aes and ctr-aes have been added.
Signed-off-by: Ingo Tuchscherer <[email protected]>
Signed-off-by: Martin Schwidefsky <[email protected]>
|
|
Make smatch happy and remove this warning:
drivers/s390/char/raw3270.c:347 raw3270_irq() error: we previously
assumed 'rq' could be null (see line 342)
Signed-off-by: Martin Schwidefsky <[email protected]>
|
|
This patch fixes the following smatch warning:
monwrite_diag() error: strcpy() '"LNXAPPL"' too large for 'id.prod_nr'
(8 vs 7)
Using strcpy() is wrong, because it also copies the terminating null
byte, but in this case the extra copied null byte will be overwritten
right after the strcpy(), so there is no real problem here.
Use strncpy() to fix the warning.
Signed-off-by: Gerald Schaefer <[email protected]>
Signed-off-by: Martin Schwidefsky <[email protected]>
|
|
Just change the type of "len" to unsigned int so the compiler can prove
that we don't have a buffer overflow (and generates less code).
We get rid of these:
In function 'copy_from_user',
inlined from 'appldata_interval_handler' at
arch/s390/appldata/appldata_base.c:265:
uaccess.h:303: warning: call to 'copy_from_user_overflow' declared
with attribute warning: copy_from_user() buffer size is not provably
correct
In function 'copy_from_user',
inlined from 'appldata_timer_handler' at
arch/s390/appldata/appldata_base.c:225:
uaccess.h:303: warning: call to 'copy_from_user_overflow' declared
with attribute warning: copy_from_user() buffer size is not provably
correct
In function 'copy_from_user',
inlined from 'appldata_generic_handler' at
arch/s390/appldata/appldata_base.c:333:
uaccess.h:303: warning: call to 'copy_from_user_overflow' declared
with attribute warning: copy_from_user() buffer size is not provably
correct
Signed-off-by: Heiko Carstens <[email protected]>
Signed-off-by: Martin Schwidefsky <[email protected]>
|
|
Get rid of these two warnings:
In function 'copy_from_user',
inlined from 'cmm_timeout_handler' at arch/s390/mm/cmm.c:310:
uaccess.h:303: warning: call to 'copy_from_user_overflow' declared
with attribute warning: copy_from_user() buffer size is not provably
correct
In function 'copy_from_user',
inlined from 'cmm_pages_handler' at arch/s390/mm/cmm.c:270:
uaccess.h:303: warning: call to 'copy_from_user_overflow' declared
with attribute warning: copy_from_user() buffer size is not provably
correct
Change the "len" type to unsigned int, so we can make sure that there is no
buffer overflow. This also generates less code.
Signed-off-by: Heiko Carstens <[email protected]>
Signed-off-by: Martin Schwidefsky <[email protected]>
|
|
Get rid of this one:
arch/s390/kernel/cache.c: In function 'cache_build_info':
arch/s390/kernel/cache.c:144: warning: 'private' may be used uninitialized
in this function
Signed-off-by: Heiko Carstens <[email protected]>
Signed-off-by: Martin Schwidefsky <[email protected]>
|
|
Instead of returnin the number of bytes not copied and/or -EFAULT let the
signal handler helper functions always return -EFAULT if a user space
access failed.
This doesn't fix a bug in the current code, but makes is harder to get it
wrong in the future.
Also "smatch" won't complain anymore about the fact that the number of
remaining bytes gets returned instead of -EFAULT.
Signed-off-by: Heiko Carstens <[email protected]>
Signed-off-by: Martin Schwidefsky <[email protected]>
|
|
Signed-off-by: Michael Holzheu <[email protected]>
Signed-off-by: Martin Schwidefsky <[email protected]>
|
|
Missing parenthesis may cause problems when using the defines
together with operations of higher precedence.
Signed-off-by: Peter Oberparleiter <[email protected]>
Signed-off-by: Martin Schwidefsky <[email protected]>
|
|
Currently zfpcdump can only collect registers for up to CONFIG_NR_CPUS
CPUss. This dependency is not necessary. So remove it by dynamically
allocating the save area array.
Signed-off-by: Michael Holzheu <[email protected]>
Reviewed-by: Heiko Carstens <[email protected]>
Signed-off-by: Martin Schwidefsky <[email protected]>
|
|
Steven Rostedt noted that s390 is the only architecture which calls
ftrace_push_return_trace() before ftrace_graph_entry() and therefore has
the small advantage that trace.depth gets initialized automatically.
However this small advantage isn't worth the difference and possible subtle
breakage that may result from this.
So change s390 to have the same function call order like all other
architectures: first ftrace_graph_entry(), then ftrace_push_return_trace()
Reported-by: Steven Rostedt <[email protected]>
Signed-off-by: Heiko Carstens <[email protected]>
Signed-off-by: Martin Schwidefsky <[email protected]>
|
|
Get rid of this compile warning:
arch/s390/kernel/crash_dump.c: In function 'copy_from_realmem':
arch/s390/kernel/crash_dump.c:48:6: warning: unused variable 'rc'
[-Wunused-variable]
int rc;
^
Signed-off-by: Heiko Carstens <[email protected]>
Signed-off-by: Martin Schwidefsky <[email protected]>
|
|
The type of 'v->counter' is always 'int', and related inline assembly
code also process 'int', so use 'unsigned int' instead of 'unsigned
long' for the 'mask'.
Signed-off-by: Chen Gang <[email protected]>
Signed-off-by: Heiko Carstens <[email protected]>
Signed-off-by: Martin Schwidefsky <[email protected]>
|
|
If [__]get_user_pages_fast() gets called with nr_pages == 0, the current
code would walk the page tables and pin as many pages until the first
invalid pte (or the kernel crashed while writing struct page pointers to
the pages array).
So let's handle at least the nr_pages == 0 case correctly and exit early.
Signed-off-by: Heiko Carstens <[email protected]>
Signed-off-by: Martin Schwidefsky <[email protected]>
|
|
Just call __get_user_pages_fast() from get_user_pages_fast() like powerpc.
This saves a lot of duplicated code.
Reviewed-by: Gerald Schaefer <[email protected]>
Signed-off-by: Heiko Carstens <[email protected]>
Signed-off-by: Martin Schwidefsky <[email protected]>
|
|
With dirty and referenced bits implemented in software it is unnecessary
to initialize the storage key for every page. With this patch not a single
storage key operation is done for a system that does not use KVM.
For KVM set_pte_at/pgste_set_key will do the initialization for the guest
view of the storage key when the mapping for the page is established in
the host.
Signed-off-by: Martin Schwidefsky <[email protected]>
|
|
The prolog of functions generated by the bpf jit compiler uses an
instruction sequence with an "ahi" instruction to create stack space
instead of using an "aghi" instruction. Using the 32-bit "ahi" is not
wrong as the stack we are operating on is an order-4 allocation which
is always aligned to 16KB. But it is more consistent to use an "aghi"
as the stack pointer is a 64-bit value.
Signed-off-by: Martin Schwidefsky <[email protected]>
|
|
- turn some macros into functions
- merge two almost identical versions for 32/64 bit
- add BUILD_BUG_ON() check to make sure the passed in array is large enough
Signed-off-by: Heiko Carstens <[email protected]>
Signed-off-by: Martin Schwidefsky <[email protected]>
|
|
When quiescing an eadm subchannel make sure that outstanding IO is
cleared and potential timeout handlers are canceled.
Reviewed-by: Peter Oberparleiter <[email protected]>
Signed-off-by: Sebastian Ott <[email protected]>
Signed-off-by: Martin Schwidefsky <[email protected]>
|
|
Implement architecture-specific functionality when a PCI device is
doing a hibernate transition.
Signed-off-by: Sebastian Ott <[email protected]>
Signed-off-by: Martin Schwidefsky <[email protected]>
|
|
Simplify the uaccess code by removing the user_mode=home option.
The kernel will now always run in the home space mode.
Signed-off-by: Martin Schwidefsky <[email protected]>
|
|
find_first_bit_left() and friends have nothing to do with the normal
LSB0 bit numbering for big endian machines used in Linux (least
significant bit has bit number 0).
Instead they use MSB0 bit numbering, where the most signficant bit has
bit number 0. So rename find_first_bit_left() and friends to
find_first_bit_inv(), to avoid any confusion.
Also provide inv versions of set_bit, clear_bit and test_bit.
This also removes the confusing use of e.g. set_bit() in airq.c which
uses a "be_to_le" bit number conversion, which could imply that instead
set_bit_le() could be used. But that is entirely wrong since the _le
bitops variant uses yet another bit numbering scheme.
Signed-off-by: Heiko Carstens <[email protected]>
Signed-off-by: Martin Schwidefsky <[email protected]>
|
|
Since z9 109 we have the flogr instruction which can be used to implement
optimized versions of __ffs, ffs, __fls, fls and fls64.
So implement and use them, instead of the generic variants.
This reduces the size of the kernel image (defconfig, -march=z9-109)
by 19,648 bytes.
Signed-off-by: Heiko Carstens <[email protected]>
Signed-off-by: Martin Schwidefsky <[email protected]>
|
|
Just like all other architectures we should use out-of-line find bit
operations, since the inline variant bloat the size of the kernel image.
And also like all other architecures we should only supply optimized
variants of the __ffs, ffs, etc. primitives.
Therefore this patch removes the inlined s390 find bit functions and uses
the generic out-of-line variants instead.
The optimization of the primitives follows with the next patch.
With this patch also the functions find_first_bit_left() and
find_next_bit_left() have been reimplemented, since logically, they are
nothing else but a find_first_bit()/find_next_bit() implementation that
use an inverted __fls() instead of __ffs().
Also the restriction that these functions only work on machines which
support the "flogr" instruction is gone now.
This reduces the size of the kernel image (defconfig, -march=z9-109)
by 144,482 bytes.
Alone the size of the function build_sched_domains() gets reduced from
7 KB to 3,5 KB.
We also git rid of unused functions like find_first_bit_le()...
Signed-off-by: Heiko Carstens <[email protected]>
Signed-off-by: Martin Schwidefsky <[email protected]>
|
|
Refactor direct debug level comparisons with the (internal) s390db->level
member. Use the debug_level_enabled() function instead.
Signed-off-by: Hendrik Brueckner <[email protected]>
Signed-off-by: Martin Schwidefsky <[email protected]>
|
|
Add the debug_level_enabled() function to check if debug events for
a particular level would be logged. This might help to save cycles
for debug events that require additional information collection.
Signed-off-by: Hendrik Brueckner <[email protected]>
Signed-off-by: Martin Schwidefsky <[email protected]>
|
|
Since zEC12 we have the interlocked-access facility 2 which allows to
use the instructions ni/oi/xi to update a single byte in storage with
compare-and-swap semantics.
So change set_bit(), clear_bit() and change_bit() to generate such code
instead of a compare-and-swap loop (or using the load-and-* instruction
family), if possible.
This reduces the text segment by yet another 8KB (defconfig).
Alternatively the long displacement variants niy/oiy/xiy could have
been used, but the extended displacement field is usually not needed
and therefore would only increase the size of the text segment again.
Signed-off-by: Heiko Carstens <[email protected]>
Signed-off-by: Martin Schwidefsky <[email protected]>
|
|
Remove CONFIG_SMP from bitops code. This reduces the C code significantly
but also generates better code for the SMP case.
This means that for !CONFIG_SMP set_bit() and friends now also have
compare and swap semantics (read: more code). However nobody really cares
for !CONFIG_SMP and this is the trade-off to simplify the SMP code which we
do care about.
The non-atomic bitops like __set_bit() now generate also better code
because the old code did not have a __builtin_contant_p() check for the
CONFIG_SMP case and therefore always generated the inline assembly variant.
However the inline assemblies for the non-atomic case now got completely
removed since gcc can produce better code, which accesses less memory
operands.
test_bit() got also a bit simplified since it did have a
__builtin_constant_p() check, however two identical code pathes for each
case (written differently).
In result this mainly reduces the to be maintained code but is not very
relevant for code generation, since there are not many non-atomic bitops
usages that we care about.
(code reduction defconfig kernel image before/after: 560 bytes).
Signed-off-by: Heiko Carstens <[email protected]>
Signed-off-by: Martin Schwidefsky <[email protected]>
|
|
- add a typecheck to the defines to make sure they operate on an atomic_t
- simplify inline assembly constraints
- keep variable names common between functions
Signed-off-by: Heiko Carstens <[email protected]>
Signed-off-by: Martin Schwidefsky <[email protected]>
|
|
If the interlocked-access facility 1 is available we can use the asi
and agsi instructions for interlocked updates if the to be added
value is a contanst and small (in the range of -128..127).
asi and agsi do not not return the old or new value, therefore these
instructions can only be used for atomic_(add|sub|inc|dec)[64].
Signed-off-by: Heiko Carstens <[email protected]>
Signed-off-by: Martin Schwidefsky <[email protected]>
|
|
get_inbound_buffer_frontier() makes use of the return value of atomic_sub()
which shouldn't work, since atomic_sub() is supposed to return void.
This only works on s390 because atomic_sub() gets mapped to atomic_sub_return()
with a define without changing it's return value to void.
So use atomic_sub_return() instead of atomic_sub() in qeth code before fixing
atomic ops.
Signed-off-by: Heiko Carstens <[email protected]>
Signed-off-by: Martin Schwidefsky <[email protected]>
|
|
Since we have an in-kernel disassembler we can make sure that
there won't be any kprobes set on random data.
Signed-off-by: Heiko Carstens <[email protected]>
Signed-off-by: Martin Schwidefsky <[email protected]>
|
|
Signed-off-by: Heiko Carstens <[email protected]>
Signed-off-by: Martin Schwidefsky <[email protected]>
|
|
Now that the in-kernel disassembler has an own header file move the
disassembler related function prototypes to that header file.
Signed-off-by: Heiko Carstens <[email protected]>
Signed-off-by: Martin Schwidefsky <[email protected]>
|
|
The patch moves some of the definitions to a
header file. No functional changes involved.
I have retained the Copyright Statement from the
original file.
Signed-off-by: Suzuki K Poulose <[email protected]>
[Heiko Carstens: rename s390-dis.h to dis.h]
Signed-off-by: Heiko Carstens <[email protected]>
Signed-off-by: Martin Schwidefsky <[email protected]>
|
|
Rename 'insn' and 'operand' structures to more canonical names
to avoid conflicts.
struct insn represents information about an instruction, including
the mnemonics, format and opcode.
struct operand represents the 'properties' and information on howto
interpret the operand value and doesn't contain the value.
We rename these structures for avoiding a global conflict.
i.e,
1,$s/struct insn/struct s390_insn/g
1,$s/struct operand/struct s390_operand/g
Signed-off-by: Suzuki K Poulose <[email protected]>
Signed-off-by: Heiko Carstens <[email protected]>
Signed-off-by: Martin Schwidefsky <[email protected]>
|
|
Same as for bitops: make use of the interlocked-access facility 1
instructions which allow to atomically update storage locations
without a compare-and-swap loop.
Signed-off-by: Heiko Carstens <[email protected]>
Signed-off-by: Martin Schwidefsky <[email protected]>
|
|
Get rid of the own atomic_sub_return() implementation. Otherwise we can't
make use of the interlocked-access facility 1 instructions for
atomic_sub_return(), since there is no "load and subtract" instruction
available.
Signed-off-by: Heiko Carstens <[email protected]>
Signed-off-by: Martin Schwidefsky <[email protected]>
|
|
When checking the insn address wether it is a kernel image or module
address it should be an if-else-if statement not two independent if
statements.
This doesn't really fix a bug, but matches s390_free_insn_slot().
Signed-off-by: Heiko Carstens <[email protected]>
Signed-off-by: Martin Schwidefsky <[email protected]>
|
|
Currently we only set the -march compiler option if the kbuild
system figured out that the compiler actually supports the selected
architecture (cc-option test).
In result this means that no -march compiler option is set when an
unsupported cpu architecture of the current compiler is selected.
The kernel compile will afterwards succeed but with the default
architecture instead of the (unsupported) selected one.
Change this behaviour, so compiles will fail if the compiler does
not support the selected cpu architecture.
Signed-off-by: Heiko Carstens <[email protected]>
Signed-off-by: Martin Schwidefsky <[email protected]>
|
|
Make use of the interlocked-access facility 1 that got added with the
z196 architecure.
This facilility added new instructions which can atomically update a
storage location without a compare-and-swap loop. E.g. setting a bit
within a "long" can be done with a single instruction.
The size of the kernel image gets ~30kb smaller. Considering that there
are appr. 1900 bitops call sites this means that each one saves about
15-16 bytes per call site which is expected.
Signed-off-by: Heiko Carstens <[email protected]>
Signed-off-by: Martin Schwidefsky <[email protected]>
|
|
Pull md bugfixes from Neil Brown:
"Assorted md bug-fixes for 3.12.
All tagged for -stable releases too"
* tag 'md/3.12-fixes' of git://neil.brown.name/md:
raid5: avoid finding "discard" stripe
raid5: set bio bi_vcnt 0 for discard request
md: avoid deadlock when md_set_badblocks.
md: Fix skipping recovery for read-only arrays.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"This is a set of two fixes which cause oopses (Buslogic, qla2xxx) and
one fix which may cause a hang because of request miscounting (sd)"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
[SCSI] sd: call blk_pm_runtime_init before add_disk
[SCSI] qla2xxx: Fix request queue null dereference.
[SCSI] BusLogic: Fix an oops when intializing multimaster adapter
|
|
SCSI discard will damage discard stripe bio setting, eg, some fields are
changed. If the stripe is reused very soon, we have wrong bios setting. We
remove discard stripe from hash list, so next time the strip will be fully
initialized.
Suitable for backport to 3.7+.
Cc: <[email protected]> (3.7+)
Signed-off-by: Shaohua Li <[email protected]>
Signed-off-by: NeilBrown <[email protected]>
|