| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
percpu_counter_sum_all() is now redundant as the race condition it
was invented to handle is now dealt with by percpu_counter_sum()
directly and all users of percpu_counter_sum_all() have been
removed.
Remove it.
This effectively reverts the changes made in f689054aace2
("percpu_counter: add percpu_counter_sum_all interface") except for
the cpumask iteration that fixes percpu_counter_sum() made earlier
in this series.
Signed-off-by: Dave Chinner <[email protected]>
Reviewed-by: Darrick J. Wong <[email protected]>
Signed-off-by: Darrick J. Wong <[email protected]>
|
|
This effectively reverts the change made in commit f689054aace2
("percpu_counter: add percpu_counter_sum_all interface") as the
race condition percpu_counter_sum_all() was invented to avoid is
now handled directly in percpu_counter_sum() and nobody needs to
care about summing racing with cpu unplug anymore.
Signed-off-by: Dave Chinner <[email protected]>
Reviewed-by: Darrick J. Wong <[email protected]>
Signed-off-by: Darrick J. Wong <[email protected]>
|
|
In commit f689054aace2 ("percpu_counter: add percpu_counter_sum_all
interface") a race condition between a cpu dying and
percpu_counter_sum() iterating online CPUs was identified. The
solution was to iterate all possible CPUs for summation via
percpu_counter_sum_all().
We recently had a percpu_counter_sum() call in XFS trip over this
same race condition and it fired a debug assert because the
filesystem was unmounting and the counter *should* be zero just
before we destroy it. That was reported here:
https://lore.kernel.org/linux-kernel/[email protected]/
likely as a result of running generic/648 which exercises
filesystems in the presence of CPU online/offline events.
The solution to use percpu_counter_sum_all() is an awful one. We
use percpu counters and percpu_counter_sum() for accurate and
reliable threshold detection for space management, so a summation
race condition during these operations can result in overcommit of
available space and that may result in filesystem shutdowns.
As percpu_counter_sum_all() iterates all possible CPUs rather than
just those online or even those present, the mask can include CPUs
that aren't even installed in the machine, or in the case of
machines that can hot-plug CPU capable nodes, even have physical
sockets present in the machine.
Fundamentally, this race condition is caused by the CPU being
offlined being removed from the cpu_online_mask before the notifier
that cleans up per-cpu state is run. Hence percpu_counter_sum() will
not sum the count for a cpu currently being taken offline,
regardless of whether the notifier has run or not. This is
the root cause of the bug.
The percpu counter notifier iterates all the registered counters,
locks the counter and moves the percpu count to the global sum.
This is serialised against other operations that move the percpu
counter to the global sum as well as percpu_counter_sum() operations
that sum the percpu counts while holding the counter lock.
Hence the notifier is safe to run concurrently with sum operations,
and the only thing we actually need to care about is that
percpu_counter_sum() iterates dying CPUs. That's trivial to do,
and when there are no CPUs dying, it has no addition overhead except
for a cpumask_or() operation.
This change makes percpu_counter_sum() always do the right thing in
the presence of CPU hot unplug events and makes
percpu_counter_sum_all() unnecessary. This, in turn, means that
filesystems like XFS, ext4, and btrfs don't have to work out when
they should use percpu_counter_sum() vs percpu_counter_sum_all() in
their space accounting algorithms
Signed-off-by: Dave Chinner <[email protected]>
Reviewed-by: Darrick J. Wong <[email protected]>
Signed-off-by: Darrick J. Wong <[email protected]>
|
|
Equivalent of for_each_cpu_and, except it ORs the two masks together
so it iterates all the CPUs present in either mask.
Signed-off-by: Dave Chinner <[email protected]>
Reviewed-by: Darrick J. Wong <[email protected]>
Signed-off-by: Darrick J. Wong <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RAS fix from Borislav Petkov:
- Flush out logged errors immediately after MCA banks configuration
changes over sysfs have been done instead of waiting until something
else triggers the workqueue later - another error or the polling
interval cycle is reached
* tag 'ras_urgent_for_v6.3_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce: Make sure logged MCEs are processed after sysfs update
|
|
Back in the 6.2-rc1 days, Eric Whitney reported a fstests regression in
ext4 against generic/454. The cause of this test failure was the
unfortunate combination of setting an xattr name containing UTF8 encoded
emoji, an xattr hash function that accepted a char pointer with no
explicit signedness, signed type extension of those chars to an int, and
the 6.2 build tools maintainers deciding to mandate -funsigned-char
across the board. As a result, the ondisk extended attribute structure
written out by 6.1 and 6.2 were not the same.
This discrepancy, in fact, had been noticeable if a filesystem with such
an xattr were moved between any two architectures that don't employ the
same signedness of a raw "char" declaration. The only reason anyone
noticed is that x86 gcc defaults to signed, and no such -funsigned-char
update was made to e2fsprogs, so e2fsck immediately started reporting
data corruption.
After a day and a half of discussing how to handle this use case (xattrs
with bit 7 set anywhere in the name) without breaking existing users,
Linus merged his own patch and didn't tell the maintainer. None of the
ext4 developers realized this until AUTOSEL announced that the commit
had been backported to stable.
In the end, this problem could have been detected much earlier if there
had been any useful tests of hash function(s) in use inside ext4 to make
sure that they always produce the same outputs given the same inputs.
The XFS dirent/xattr name hash takes a uint8_t*, so I don't think it's
vulnerable to this problem. However, let's avoid all this drama by
adding our own self test to check that the da hash produces the same
outputs for a static pile of inputs on various platforms. This enables
us to fix any breakage that may result in a controlled fashion. The
buffer and test data are identical to the patches submitted to xfsprogs.
Link: https://lore.kernel.org/linux-ext4/Y8bpkm3jA3bDm3eL@debian-BULLSEYE-live-builder-AMD64/
Link: https://lore.kernel.org/linux-xfs/ZBUKCRR7xvIqPrpX@destitution/T/#md38272cc684e2c0d61494435ccbb91f022e8dee4
Signed-off-by: Darrick J. Wong <[email protected]>
Reviewed-by: Dave Chinner <[email protected]>
|
|
There are now five separate space allocator interfaces exposed to the
rest of XFS for five different strategies to find space. Add
tracepoints for each of them so that I can tell from a trace dump
exactly which ones got called and what happened underneath them. Add a
sixth so it's more obvious if an allocation actually happened.
Signed-off-by: Darrick J. Wong <[email protected]>
Reviewed-by: Dave Chinner <[email protected]>
|
|
Callers of xfs_alloc_vextent_iterate_ags that pass in the TRYLOCK flag
want us to perform a non-blocking scan of the AGs for free space. There
are no ordering constraints for non-blocking AGF lock acquisition, so
the scan can freely start over at AG 0 even when minimum_agno > 0.
This manifests fairly reliably on xfs/294 on 6.3-rc2 with the parent
pointer patchset applied and the realtime volume enabled. I observed
the following sequence as part of an xfs_dir_createname call:
0. Fragment the free space, then allocate nearly all the free space in
all AGs except AG 0.
1. Create a directory in AG 2 and let it grow for a while.
2. Try to allocate 2 blocks to expand the dirent part of a directory.
The space will be allocated out of AG 0, but the allocation will not
be contiguous. This (I think) activates the LOWMODE allocator.
3. The bmapi call decides to convert from extents to bmbt format and
tries to allocate 1 block. This allocation request calls
xfs_alloc_vextent_start_ag with the inode number, which starts the
scan at AG 2. We ignore AG 0 (with all its free space) and instead
scrape AG 2 and 3 for more space. We find one block, but this now
kicks t_highest_agno to 3.
4. The createname call decides it needs to split the dabtree. It tries
to allocate even more space with xfs_alloc_vextent_start_ag, but now
we're constrained to AG 3, and we don't find the space. The
createname returns ENOSPC and the filesystem shuts down.
This change fixes the problem by making the trylock scan wrap around to
AG 0 if it doesn't like the AGs that it finds. Since the current
transaction itself holds AGF 0, the trylock of AGF 0 will succeed, and
we take space from the AG that has plenty.
Signed-off-by: Darrick J. Wong <[email protected]>
Reviewed-by: Dave Chinner <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Borislav Petkov:
- Check whether sibling events have been deactivated before adding them
to groups
- Update the proper event time tracking variable depending on the event
type
- Fix a memory overwrite issue due to using the wrong function argument
when outputting perf events
* tag 'perf_urgent_for_v6.3_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf: Fix check before add_event_to_groups() in perf_group_detach()
perf: fix perf_event_context->time
perf/core: Fix perf_output_begin parameter is incorrectly invoked in perf_event_bpf_output
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
"There's a little bit more 'movement' in there for my taste but it
needs to happen and should make the code better after it.
- Check cmdline_find_option()'s return value before further
processing
- Clear temporary storage in the resctrl code to prevent access to an
unexistent MSR
- Add a simple throttling mechanism to protect the hypervisor from
potentially malicious SEV guests issuing requests in rapid
succession.
In order to not jeopardize the sanity of everyone involved in
maintaining this code, the request issuing side has received a
cleanup, split in more or less trivial, small and digestible
pieces. Otherwise, the code was threatening to become an
unmaintainable mess.
Therefore, that cleanup is marked indirectly also for stable so
that there's no differences between the upstream code and the
stable variant when it comes down to backporting more there"
* tag 'x86_urgent_for_v6.3_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Fix use of uninitialized buffer in sme_enable()
x86/resctrl: Clear staged_config[] before and after it is used
virt/coco/sev-guest: Add throttling awareness
virt/coco/sev-guest: Convert the sw_exit_info_2 checking to a switch-case
virt/coco/sev-guest: Do some code style cleanups
virt/coco/sev-guest: Carve out the request issuing logic into a helper
virt/coco/sev-guest: Remove the disable_vmpck label in handle_guest_request()
virt/coco/sev-guest: Simplify extended guest request handling
virt/coco/sev-guest: Check SEV_SNP attribute at probe time
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fix from Ted Ts'o:
"Fix a double unlock bug on an error path in ext4, found by smatch and
syzkaller"
* tag 'ext4_for_linus_urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: fix possible double unlock when moving a directory
|
|
smatch reports this warning
kernel/trace/ftrace.c:2594:19: warning:
symbol 'direct_ops' was not declared. Should it be static?
The variable direct_ops is only used in ftrace.c, so it should be static
Link: https://lore.kernel.org/linux-trace-kernel/[email protected]
Signed-off-by: Tom Rix <[email protected]>
Acked-by: Masami Hiramatsu (Google) <[email protected]>
Signed-off-by: Steven Rostedt (Google) <[email protected]>
|
|
The hwlatd tracer will end up starting multiple per-cpu threads with
the following script:
#!/bin/sh
cd /sys/kernel/debug/tracing
echo 0 > tracing_on
echo hwlat > current_tracer
echo per-cpu > hwlat_detector/mode
echo 100000 > hwlat_detector/width
echo 200000 > hwlat_detector/window
echo 1 > tracing_on
To fix the issue, check if the hwlatd thread for the cpu is already
running, before starting a new one. Along with the previous patch, this
avoids running multiple instances of the same CPU thread on the system.
Link: https://lore.kernel.org/all/[email protected]/
Link: https://lkml.kernel.org/r/[email protected]
Cc: [email protected]
Fixes: f46b16520a087 ("trace/hwlat: Implement the per-cpu mode")
Signed-off-by: Tero Kristo <[email protected]>
Acked-by: Daniel Bristot de Oliveira <[email protected]>
Signed-off-by: Steven Rostedt (Google) <[email protected]>
|
|
Do not wipe the contents of the per-cpu kthread data when starting the
tracer, as this will completely forget about already running instances
and can later start new additional per-cpu threads.
Link: https://lore.kernel.org/all/[email protected]/
Link: https://lkml.kernel.org/r/[email protected]
Cc: [email protected]
Fixes: f46b16520a087 ("trace/hwlat: Implement the per-cpu mode")
Signed-off-by: Tero Kristo <[email protected]>
Acked-by: Daniel Bristot de Oliveira <[email protected]>
Signed-off-by: Steven Rostedt (Google) <[email protected]>
|
|
storage-class-specifier to static
smatch reports several similar warnings
kernel/trace/trace_osnoise.c:220:1: warning:
symbol '__pcpu_scope_per_cpu_osnoise_var' was not declared. Should it be static?
kernel/trace/trace_osnoise.c:243:1: warning:
symbol '__pcpu_scope_per_cpu_timerlat_var' was not declared. Should it be static?
kernel/trace/trace_osnoise.c:335:14: warning:
symbol 'interface_lock' was not declared. Should it be static?
kernel/trace/trace_osnoise.c:2242:5: warning:
symbol 'timerlat_min_period' was not declared. Should it be static?
kernel/trace/trace_osnoise.c:2243:5: warning:
symbol 'timerlat_max_period' was not declared. Should it be static?
These variables are only used in trace_osnoise.c, so it should be static
Link: https://lore.kernel.org/linux-trace-kernel/[email protected]
Signed-off-by: Tom Rix <[email protected]>
Acked-by: Masami Hiramatsu (Google) <[email protected]>
Acked-by: Daniel Bristot de Oliveira <[email protected]>
Signed-off-by: Steven Rostedt (Google) <[email protected]>
|
|
Overwriting the error code with the deletion result may cause the
function to return 0 despite encountering an error. Commit b111545d26c0
("tracing: Remove the useless value assignment in
test_create_synth_event()") solves a similar issue by
returning the original error code, so this patch does the same.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Link: https://lore.kernel.org/linux-trace-kernel/[email protected]
Signed-off-by: Anton Gusev <[email protected]>
Reviewed-by: Steven Rostedt (Google) <[email protected]>
Acked-by: Masami Hiramatsu (Google) <[email protected]>
Signed-off-by: Steven Rostedt (Google) <[email protected]>
|
|
The cooling levels array is supposed to prevent the system fans from
being configured below a 20% duty cycle as otherwise some of them get
stuck at 0 RPM.
Due to an off-by-one error, the last element in the array was not
initialized, causing it to be set to zero, which in turn lead to fans
being configured with a 0% duty cycle in maximum cooling state.
Since commit 332fdf951df8 ("mlxsw: thermal: Fix out-of-bounds memory
accesses") the contents of the array are static. Therefore, instead of
fixing the initialization of the array, simply remove it and adjust
thermal_cooling_device_ops::set_cur_state() so that the configured duty
cycle is never set below 20%.
Before:
# cat /sys/class/thermal/thermal_zone0/cdev0/type
mlxsw_fan
# echo 10 > /sys/class/thermal/thermal_zone0/cdev0/cur_state
# cat /sys/class/hwmon/hwmon0/name
mlxsw
# cat /sys/class/hwmon/hwmon0/pwm1
0
After:
# cat /sys/class/thermal/thermal_zone0/cdev0/type
mlxsw_fan
# echo 10 > /sys/class/thermal/thermal_zone0/cdev0/cur_state
# cat /sys/class/hwmon/hwmon0/name
mlxsw
# cat /sys/class/hwmon/hwmon0/pwm1
255
This bug was uncovered when the thermal subsystem repeatedly tried to
configure the cooling devices to their maximum state due to another
issue [1]. This resulted in the fans being stuck at 0 RPM, which
eventually lead to the system undergoing thermal shutdown.
[1] https://lore.kernel.org/netdev/ZA3CFNhU4AbtsP4G@shredder/
Fixes: a421ce088ac8 ("mlxsw: core: Extend cooling device with cooling levels")
Signed-off-by: Ido Schimmel <[email protected]>
Reviewed-by: Vadim Pasternak <[email protected]>
Signed-off-by: Petr Machata <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Andrew reports that the SFF modules on one of the ZII platforms do not
indicate link up due to the SFP code believing that LOS indicating that
there is no signal being received from the remote end, but in fact the
LOS signal is showing that there is signal.
What makes SFF modules different from SFPs is they typically have an
inverted LOS, which uncovered this issue. When we read the hardware
state, we mask it with state_hw_mask so we ignore anything we're not
interested in. However, we don't re-read when state_hw_mask changes,
leading to sfp->state being stale.
Arrange for a software poll of the module state after we have parsed
the EEPROM in sfp_sm_mod_probe() and updated state_*_mask. This will
generate any necessary events for signal changes for the state
machine as well as updating sfp->state.
Reported-by: Andrew Lunn <[email protected]>
Tested-by: Andrew Lunn <[email protected]>
Fixes: 8475c4b70b04 ("net: sfp: re-implement soft state polling setup")
Signed-off-by: Russell King (Oracle) <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Currently DMA address width is either read from a RO device register
or force set from the platform data. This breaks DMA when the host DMA
address width is <=32it but the device is >32bit.
Right now the driver may decide to use a 2nd DMA descriptor for
another buffer (happens in case of TSO xmit) assuming that 32bit
addressing is used due to platform configuration but the device will
still use both descriptor addresses as one address.
This can be observed with the Intel EHL platform driver that sets
32bit for addr64 but the MAC reports 40bit. The TX queue gets stuck in
case of TCP with iptables NAT configuration on TSO packets.
The logic should be like this: Whatever we do on the host side (memory
allocation GFP flags) should happen with the host DMA width, whenever
we decide how to set addresses on the device registers we must use the
device DMA address width.
This patch renames the platform address width field from addr64 (term
used in device datasheet) to host_addr and uses this value exclusively
for host side operations while all chip operations consider the device
DMA width as read from the device register.
Fixes: 7cfc4486e7ea ("stmmac: intel: Configure EHL PSE0 GbE and PSE1 GbE to 32 bits DMA addressing")
Signed-off-by: Jochen Henneberg <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Florian Fainelli says:
====================
ACPI/DT mdiobus module owner fixes
This patch series fixes wrong mdiobus module ownership for MDIO buses
registered from DT or ACPI.
Thanks Maxime for providing the first patch and making me see that ACPI
also had the same issue.
Changes in v2:
- fixed missing kdoc in the first patch
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
Bus ownership is wrong when using acpi_mdiobus_register() to register an
mdio bus. That function is not inline, so when it calls
mdiobus_register() the wrong THIS_MODULE value is captured.
CC: Maxime Bizon <[email protected]>
Fixes: 803ca24d2f92 ("net: mdio: Add ACPI support code for mdio")
Signed-off-by: Florian Fainelli <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Bus ownership is wrong when using of_mdiobus_register() to register an mdio
bus. That function is not inline, so when it calls mdiobus_register() the wrong
THIS_MODULE value is captured.
Signed-off-by: Maxime Bizon <[email protected]>
Fixes: 90eff9096c01 ("net: phy: Allow splitting MDIO bus/device support from PHYs")
[florian: fix kdoc, added Fixes tag]
Signed-off-by: Florian Fainelli <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
In the phy_disconnect() -> phy_stop() path, we will be forcibly setting
the PHY state machine to PHY_HALTED. This invalidates the old_state !=
phydev->state condition in phy_state_machine() such that we will neither
display the state change for debugging, nor will we invoke the
link_change_notify() callback.
Factor the code by introducing phy_process_state_change(), and ensure
that we process the state change from phy_stop() as well.
Fixes: 5c5f626bcace ("net: phy: improve handling link_change_notify callback")
Signed-off-by: Florian Fainelli <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2023-03-16 (igb, igbvf, igc)
This series contains updates to igb, igbvf, and igc drivers.
Lin Ma removes rtnl_lock() when disabling SRIOV on remove which was
causing deadlock on igb.
Akihiko Odaki delays enabling of SRIOV on igb to prevent early messages
that could get ignored and clears MAC address when PF returns nack on
reset; indicating no MAC address was assigned for igbvf.
Gaosheng Cui frees IRQs in error path for igbvf.
Akashi Takahiro fixes logic on checking TAPRIO gate support for igc.
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
In xirc2ps_probe, the local->tx_timeout_task was bounded
with xirc2ps_tx_timeout_task. When timeout occurs,
it will call xirc_tx_timeout->schedule_work to start the
work.
When we call xirc2ps_detach to remove the driver, there
may be a sequence as follows:
Stop responding to timeout tasks and complete scheduled
tasks before cleanup in xirc2ps_detach, which will fix
the problem.
CPU0 CPU1
|xirc2ps_tx_timeout_task
xirc2ps_detach |
free_netdev |
kfree(dev); |
|
| do_reset
| //use dev
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Zheng Wang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
We have to make sure that the info returned by the helper is valid
before using it.
Found by Linux Verification Center (linuxtesting.org) with the SVACE
static analysis tool.
Fixes: f990c82c385b ("qed*: Add support for ndo_set_vf_trust")
Fixes: 733def6a04bf ("qed*: IOV link control")
Signed-off-by: Daniil Tatianin <[email protected]>
Reviewed-by: Michal Swiatkowski <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
It is a bug for fscrypt_put_master_key_activeref() to see a NULL
keyring. But it used to be possible due to the bug, now fixed, where
fscrypt_destroy_keyring() was called before security_sb_delete(). To be
consistent with how fscrypt_destroy_keyring() uses WARN_ON for the same
issue, WARN and leak the fscrypt_master_key if the keyring is NULL
instead of dereferencing the NULL pointer.
This is a robustness improvement, not a fix.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Eric Biggers <[email protected]>
|
|
Document that fscrypt_destroy_keyring() must be called after all
potentially-encrypted inodes have been evicted.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Eric Biggers <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev fixes from Helge Deller:
"The majority of lines changed is due to a code style cleanup in the
pnmtologo helper program.
Arnd removed the omap1 osk driver and the SIS fb driver is now
orphaned.
Other than that it's the usual bunch of small fixes and cleanups, e.g.
prevent possible divide-by-zero in various fb drivers if the pixclock
is zero and various conversions to devm_platform*() and of_property*()
functions:
- Drop omap1 osk driver
- Various potential divide by zero pixclock fixes
- Add pixelclock and fb_check_var() to stifb
- Code style cleanups and indenting fixes"
* tag 'fbdev-for-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
fbdev: Use of_property_present() for testing DT property presence
fbdev: au1200fb: Fix potential divide by zero
fbdev: lxfb: Fix potential divide by zero
fbdev: intelfb: Fix potential divide by zero
fbdev: nvidia: Fix potential divide by zero
fbdev: stifb: Provide valid pixelclock and add fb_check_var() checks
fbdev: omapfb: remove omap1 osk driver
fbdev: xilinxfb: Use devm_platform_get_and_ioremap_resource()
fbdev: wm8505fb: Use devm_platform_ioremap_resource()
fbdev: pxa3xx-gcu: Use devm_platform_get_and_ioremap_resource()
fbdev: Use of_property_read_bool() for boolean properties
fbdev: clps711x-fb: Use devm_platform_get_and_ioremap_resource()
fbdev: tgafb: Fix potential divide by zero
MAINTAINERS: orphan SIS FRAMEBUFFER DRIVER
fbdev: omapfb: cleanup inconsistent indentation
drivers: video: logo: add SPDX comment, remove GPL notice in pnmtologo.c
drivers: video: logo: fix code style issues in pnmtologo.c
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Exclude kallsyms_seqs_of_names from kallsyms to fix build error
- Fix 'make kernelrelease' for external module builds
- Get the Debian source package compilable again
- Fix the wrong uname when Debian packages are built with the
KDEB_PKGVERSION option
- Fix superfluous CROSS_COMPILE when building Debian packages
- Fix RPM package build error when KCONFIG_CONFIG is set
- Use 'git archive' for creating source tarballs
- Remove the scripts/list-gitignored tool
* tag 'kbuild-fixes-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: use git-archive for source package creation
kbuild: rpm-pkg: move source components to rpmbuild/SOURCES
kbuild: deb-pkg: use dh_listpackages to know enabled packages
kbuild: deb-pkg: split image and debug objects staging out into functions
kbuild: deb-pkg: set CROSS_COMPILE only when undefined
kbuild: deb-pkg: do not take KERNELRELEASE from the source version
kbuild: deb-pkg: make debian source package working again
Makefile: Make kernelrelease target work with M=
kconfig: Update config changed flag before calling callback
kallsyms: add kallsyms_seqs_of_names to list of special symbols
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
- ltc2992, adm1266: Set missing can_sleep flag
- tmp512/tmp513: Drop of_match_ptr for ID table to fix build with
!CONFIG_OF
- ucd90320: Fix back-to-back access problem
- ina3221: Fix bad error return from probe function
- xgene: Fix use-after-free bug in remove function
- adt7475: Fix hysteresis register bit masks, and fix association of
'smoothing' attributes
* tag 'hwmon-for-v6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (ltc2992) Set `can_sleep` flag for GPIO chip
hwmon: (adm1266) Set `can_sleep` flag for GPIO chip
hwmon: tmp512: drop of_match_ptr for ID table
hwmon: (ucd90320) Add minimum delay between bus accesses
hwmon: (ina3221) return prober error code
hwmon: (xgene) Fix use after free bug in xgene_hwmon_remove due to race condition
hwmon: (adt7475) Fix masking of hysteresis registers
hwmon: (adt7475) Display smoothing attributes in correct order
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata
Pull ata fixes from Damien Le Moal:
- Two fixes from Ondrej for the pata_parport driver to address an issue
with error handling during drive connection and to fix memory leaks
in case of errors during initialization and when disconnecting a
device.
* tag 'ata-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
ata: pata_parport: fix memory leaks
ata: pata_parport: fix parport release without claim
|
|
The __find_restype() function loops over the m5mols_default_ffmt[]
array, and the termination condition ends up being wrong: instead of
stopping when the iterator becomes the size of the array it traverses,
it stops after it has already overshot the array.
Now, in practice this doesn't likely matter, because the code will
always find the entry it looks for, and will thus return early and never
hit that last extra iteration.
But it turns out that clang will unroll the loop fully, because it has
only two iterations (well, three due to the off-by-one bug), and then
clang will end up just giving up in the middle of the loop unrolling
when it notices that the code walks past the end of the array.
And that made 'objtool' very unhappy indeed, because the generated code
just falls off the edge of the universe, and ends up falling through to
the next function, causing this warning:
drivers/media/i2c/m5mols/m5mols.o: warning: objtool: m5mols_set_fmt() falls through to next function m5mols_get_frame_desc()
Fix the loop ending condition.
Reported-by: Jens Axboe <[email protected]>
Analyzed-by: Miguel Ojeda <[email protected]>
Analyzed-by: Nick Desaulniers <[email protected]>
Link: https://lore.kernel.org/linux-block/CAHk-=wgTSdKYbmB1JYM5vmHMcD9J9UZr0mn7BOYM_LudrP+Xvw@mail.gmail.com/
Fixes: bc125106f8af ("[media] Add support for M-5MOLS 8 Mega Pixel camera ISP")
Cc: HeungJun, Kim <[email protected]>
Cc: Sylwester Nawrocki <[email protected]>
Cc: Kyungmin Park <[email protected]>
Cc: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
IO can be started before add_disk() returns, such as reading parititon table,
then the monitor work should work for making forward progress.
So mark device as LIVE before adding disk, meantime change to
DEAD if add_disk() fails.
Fixed: 71f28f3136af ("ublk_drv: add io_uring based userspace block driver")
Reviewed-by: Ziyang Zhang <[email protected]>
Signed-off-by: Ming Lei <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
Another Lenovo convertable which reports a landscape resolution of
1920x1200 with a pitch of (1920 * 4) bytes, while the actual framebuffer
has a resolution of 1200x1920 with a pitch of (1200 * 4) bytes.
Signed-off-by: Hans de Goede <[email protected]>
Reviewed-by: Javier Martinez Canillas <[email protected]>
Signed-off-by: Ard Biesheuvel <[email protected]>
|
|
Commit 8633ef82f101 ("drivers/firmware: consolidate EFI framebuffer setup
for all arches") moved the sysfb_apply_efi_quirks() call in sysfb_init()
from before the [sysfb_]parse_mode() call to after it.
But sysfb_apply_efi_quirks() modifies the global screen_info struct which
[sysfb_]parse_mode() parses, so doing it later is too late.
This has broken all DMI based quirks for correcting wrong firmware efifb
settings when simpledrm is used.
To fix this move the sysfb_apply_efi_quirks() call back to its old place
and split the new setup of the efifb_fwnode (which requires
the platform_device) into its own function and call that at
the place of the moved sysfb_apply_efi_quirks(pd) calls.
Fixes: 8633ef82f101 ("drivers/firmware: consolidate EFI framebuffer setup for all arches")
Cc: [email protected]
Cc: Javier Martinez Canillas <[email protected]>
Cc: Thomas Zimmermann <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
Reviewed-by: Javier Martinez Canillas <[email protected]>
Signed-off-by: Ard Biesheuvel <[email protected]>
|
|
We no longer use the recsize argument for locating the string table in
an SMBIOS record, so we can drop it from the internal API.
Signed-off-by: Ard Biesheuvel <[email protected]>
|
|
Instead of using the SMBIOS type 1 record 'family' field, which is often
modified by OEMs, use the type 4 'processor ID' and 'processor version'
fields, which are set to a small set of probe-able values on all known
Ampere EFI systems in the field.
Fixes: 550b33cfd4452968 ("arm64: efi: Force the use of ...")
Tested-by: Andrea Righi <[email protected]>
Signed-off-by: Ard Biesheuvel <[email protected]>
|
|
The type 1 SMBIOS record happens to always be the same size, but there
are other record types which have been augmented over time, and so we
should really use the length field in the header to decide where the
string table starts.
Fixes: 550b33cfd4452968 ("arm64: efi: Force the use of ...")
Signed-off-by: Ard Biesheuvel <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2023-03-16 (iavf)
This series contains updates to iavf driver only.
Alex fixes incorrect check against Rx hash feature and corrects payload
value for IPv6 UDP packet.
Ahmed removes bookkeeping of VLAN 0 filter as it always exists and can
cause a false max filter error message.
* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
iavf: do not track VLAN 0 filters
iavf: fix non-tunneled IPv6 UDP packet type and hashing
iavf: fix inverted Rx hash condition leading to disabled hash
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The CPTS PPS GENf adjustment settings are invalid after it has been
disabled for a while, so reset them.
Fixes: eb9233ce6751 ("net: ethernet: ti: am65-cpts: adjust pps following ptp changes")
Signed-off-by: Grygorii Strashko <[email protected]>
Signed-off-by: Siddharth Vadapalli <[email protected]>
Reviewed-by: Roger Quadros <[email protected]>
Reviewed-by: Michal Swiatkowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Packet length retrieved from descriptor may be larger than
the actual socket buffer length. In such case the cloned
skb passed up the network stack will leak kernel memory contents.
Fixes: 2f7ca802bdae ("net: Add SMSC LAN9500 USB2.0 10/100 ethernet adapter driver")
Signed-off-by: Szymon Heidrich <[email protected]>
Reviewed-by: Jakub Kicinski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
CPU port should also be enabled in order to get a working switch.
Fixes: a5538a777b73 ("net: dsa: b53: mmap: Add device tree support")
Signed-off-by: Álvaro Fernández Rojas <[email protected]>
Acked-by: Florian Fainelli <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Fixes: 0813299c586b ("ext4: Fix possible corruption when moving a directory")
Link: https://lore.kernel.org/r/[email protected]
Reported-by: Dan Carpenter <[email protected]>
Reported-by: [email protected]
Signed-off-by: Theodore Ts'o <[email protected]>
|
|
The splice read calls nfsd_splice_actor to put the pages containing file
data into the svc_rqst->rq_pages array. It's possible however to get a
splice result that only has a partial page at the end, if (e.g.) the
filesystem hands back a short read that doesn't cover the whole page.
nfsd_splice_actor will plop the partial page into its rq_pages array and
return. Then later, when nfsd_splice_actor is called again, the
remainder of the page may end up being filled out. At this point,
nfsd_splice_actor will put the page into the array _again_ corrupting
the reply. If this is done enough times, rq_next_page will overrun the
array and corrupt the trailing fields -- the rq_respages and
rq_next_page pointers themselves.
If we've already added the page to the array in the last pass, don't add
it to the array a second time when dealing with a splice continuation.
This was originally handled properly in nfsd_splice_actor, but commit
91e23b1c3982 ("NFSD: Clean up nfsd_splice_actor()") removed the check
for it.
Fixes: 91e23b1c3982 ("NFSD: Clean up nfsd_splice_actor()")
Cc: Al Viro <[email protected]>
Reported-by: Dario Lesca <[email protected]>
Tested-by: David Critch <[email protected]>
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2150630
Signed-off-by: Jeff Layton <[email protected]>
Signed-off-by: Chuck Lever <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter, wifi and ipsec.
A little more changes than usual, but it's pretty normal for us that
the rc3/rc4 PRs are oversized as people start testing in earnest.
Possibly an extra boost from people deploying the 6.1 LTS but that's
more of an unscientific hunch.
Current release - regressions:
- phy: mscc: fix deadlock in phy_ethtool_{get,set}_wol()
- virtio: vsock: don't use skbuff state to account credit
- virtio: vsock: don't drop skbuff on copy failure
- virtio_net: fix page_to_skb() miscalculating the memory size
Current release - new code bugs:
- eth: correct xdp_features after device reconfig
- wifi: nl80211: fix the puncturing bitmap policy
- net/mlx5e: flower:
- fix raw counter initialization
- fix missing error code
- fix cloned flow attribute
- ipa:
- fix some register validity checks
- fix a surprising number of bad offsets
- kill FILT_ROUT_CACHE_CFG IPA register
Previous releases - regressions:
- tcp: fix bind() conflict check for dual-stack wildcard address
- veth: fix use after free in XDP_REDIRECT when skb headroom is small
- ipv4: fix incorrect table ID in IOCTL path
- ipvlan: make skb->skb_iif track skb->dev for l3s mode
- mptcp:
- fix possible deadlock in subflow_error_report
- fix UaFs when destroying unaccepted and listening sockets
- dsa: mv88e6xxx: fix max_mtu of 1492 on 6165, 6191, 6220, 6250, 6290
Previous releases - always broken:
- tcp: tcp_make_synack() can be called from process context, don't
assume preemption is disabled when updating stats
- netfilter: correct length for loading protocol registers
- virtio_net: add checking sq is full inside xdp xmit
- bonding: restore IFF_MASTER/SLAVE flags on bond enslave Ethertype
change
- phy: nxp-c45-tja11xx: fix MII_BASIC_CONFIG_REV bit number
- eth: i40e: fix crash during reboot when adapter is in recovery mode
- eth: ice: avoid deadlock on rtnl lock when auxiliary device
plug/unplug meets bonding
- dsa: mt7530:
- remove now incorrect comment regarding port 5
- set PLL frequency and trgmii only when trgmii is used
- eth: mtk_eth_soc: reset PCS state when changing interface types
Misc:
- ynl: another license adjustment
- move the TCA_EXT_WARN_MSG attribute for tc action"
* tag 'net-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (108 commits)
selftests: bonding: add tests for ether type changes
bonding: restore bond's IFF_SLAVE flag if a non-eth dev enslave fails
bonding: restore IFF_MASTER/SLAVE flags on bond enslave ether type change
net: renesas: rswitch: Fix GWTSDIE register handling
net: renesas: rswitch: Fix the output value of quote from rswitch_rx()
ethernet: sun: add check for the mdesc_grab()
net: ipa: fix some register validity checks
net: ipa: kill FILT_ROUT_CACHE_CFG IPA register
net: ipa: add two missing declarations
net: ipa: reg: include <linux/bug.h>
net: xdp: don't call notifiers during driver init
net/sched: act_api: add specific EXT_WARN_MSG for tc action
Revert "net/sched: act_api: move TCA_EXT_WARN_MSG to the correct hierarchy"
net: dsa: microchip: fix RGMII delay configuration on KSZ8765/KSZ8794/KSZ8795
ynl: make the tooling check the license
ynl: broaden the license even more
tools: ynl: make definitions optional again
hsr: ratelimit only when errors are printed
qed/qed_mng_tlv: correctly zero out ->min instead of ->hour
selftests: net: devlink_port_split.py: skip test if no suitable device available
...
|
|
Pull block fixes from Jens Axboe:
"A bit bigger than usual, as the NVMe pull request missed last weeks
submission. In detail:
- NVMe pull request via Christoph:
- Avoid potential UAF in nvmet_req_complete (Damien Le Moal)
- More quirks (Elmer Miroslav Mosher Golovin, Philipp Geulen)
- Fix a memory leak in the nvme-pci probe teardown path
(Irvin Cote)
- Repair the MAINTAINERS entry (Lukas Bulwahn)
- Fix handling single range discard request (Ming Lei)
- Show more opcode names in trace events (Minwoo Im)
- Fix nvme-tcp timeout reporting (Sagi Grimberg)
- MD pull request via Song:
- Two fixes for old issues (Neil)
- Resource leak in device stopping (Xiao)
- Bio based device stats fix (Yu)
- Kill unused CONFIG_BLOCK_COMPAT (Lukas)
- sunvdc missing mdesc_grab() failure check (Liang)
- Fix for reversal of request ordering upon issue for certain cases
(Jan)
- null_blk timeout fixes (Damien)
- Loop use-after-free fix (Bart)
- blk-mq SRCU fix for BLK_MQ_F_BLOCKING devices (Chris)"
* tag 'block-6.3-2023-03-16' of git://git.kernel.dk/linux:
block: remove obsolete config BLOCK_COMPAT
md: select BLOCK_LEGACY_AUTOLOAD
block: count 'ios' and 'sectors' when io is done for bio-based device
block: sunvdc: add check for mdesc_grab() returning NULL
nvmet: avoid potential UAF in nvmet_req_complete()
nvme-trace: show more opcode names
nvme-tcp: add nvme-tcp pdu size build protection
nvme-tcp: fix opcode reporting in the timeout handler
nvme-pci: add NVME_QUIRK_BOGUS_NID for Lexar NM620
nvme-pci: add NVME_QUIRK_BOGUS_NID for Netac NV3000
nvme-pci: fixing memory leak in probe teardown path
nvme: fix handling single range discard request
MAINTAINERS: repair malformed T: entries in NVM EXPRESS DRIVERS
block: null_blk: cleanup null_queue_rq()
block: null_blk: Fix handling of fake timeout request
blk-mq: fix "bad unlock balance detected" on q->srcu in __blk_mq_run_dispatch_ops
loop: Fix use-after-free issues
block: do not reverse request order when flushing plug list
md: avoid signed overflow in slot_store()
md: Free resources in __md_stop
|
|
Pull io_uring fixes from Jens Axboe:
- When PF_NO_SETAFFINITY was removed for io-wq threads, we kind of
forgot about the SQPOLL thread. Remove it there as well, there's even
less of a reason to set it there (Michal)
- Fixup a confusing 'ret' setting (Li)
- When MSG_RING is used to send a direct descriptor to another ring,
it's possible to have it allocate it on the target ring rather than
provide a specific index for it. If this is done, return the chosen
value in the CQE, like we would've done locally (Pavel)
- Fix a regression in this series on huge page bvec collapsing (Pavel)
* tag 'io_uring-6.3-2023-03-16' of git://git.kernel.dk/linux:
io_uring/rsrc: fix folio accounting
io_uring/msg_ring: let target know allocated index
io_uring: rsrc: Optimize return value variable 'ret'
io_uring/sqpoll: Do not set PF_NO_SETAFFINITY on sqpoll threads
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix an error code path issue in a cpuidle driver and make the
sleepgraph utility more robust against unexpected input.
Specifics:
- Fix the psci_pd_init_topology() failure path in the PSCI cpuidle
driver (Shawn Guo)
- Modify the sleepgraph utility so it does not crash on binary data
in device names (Todd Brandt)"
* tag 'pm-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
pm-graph: sleepgraph: Avoid crashing on binary data in device names
cpuidle: psci: Iterate backwards over list in psci_pd_remove()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These add some new quirks, fix PPTT handling, fix an ACPI utility and
correct a mistake in the ACPI documentation.
Specifics:
- Fix ACPI PPTT handling to avoid sleep in the atomic context when it
is not present (Sudeep Holla)
- Add 'backlight=native' DMI quirk for Dell Vostro 15 3535 to the
ACPI video driver (Chia-Lin Kao)
- Add ACPI quirks for I2C device enumeration on Lenovo Yoga Book X90
and Acer Iconia One 7 B1-750 (Hans de Goede)
- Fix handling of invalid command line option values in the ACPI
pfrut utility (Chen Yu)
- Fix references to I2C device data type in the ACPI documentation
for device enumeration (Andy Shevchenko)"
* tag 'acpi-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: tools: pfrut: Check if the input of level and type is in the right numeric range
ACPI: PPTT: Fix to avoid sleep in the atomic context when PPTT is absent
ACPI: x86: Add skip i2c clients quirk for Lenovo Yoga Book X90
ACPI: x86: Add skip i2c clients quirk for Acer Iconia One 7 B1-750
ACPI: x86: Introduce an acpi_quirk_skip_gpio_event_handlers() helper
ACPI: video: Add backlight=native DMI quirk for Dell Vostro 15 3535
ACPI: docs: enumeration: Correct reference to the I²C device data type
|