aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2024-03-10scsi: lpfc: Use a dedicated lock for ras_fwlog stateJustin Tee6-28/+32
To reduce usage of and contention for hbalock, a separate dedicated lock is used to protect ras_fwlog state. Signed-off-by: Justin Tee <justin.tee@broadcom.com> Link: https://lore.kernel.org/r/20240305200503.57317-8-justintee8345@gmail.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-03-10scsi: lpfc: Release hbalock before calling lpfc_worker_wake_up()Justin Tee3-20/+19
lpfc_worker_wake_up() calls the lpfc_work_done() routine, which takes the hbalock. Thus, lpfc_worker_wake_up() should not be called while holding the hbalock to avoid potential deadlock. Signed-off-by: Justin Tee <justin.tee@broadcom.com> Link: https://lore.kernel.org/r/20240305200503.57317-7-justintee8345@gmail.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-03-10scsi: lpfc: Replace hbalock with ndlp lock in lpfc_nvme_unregister_port()Justin Tee1-2/+2
The ndlp object update in lpfc_nvme_unregister_port() should be protected by the ndlp lock rather than hbalock. Signed-off-by: Justin Tee <justin.tee@broadcom.com> Link: https://lore.kernel.org/r/20240305200503.57317-6-justintee8345@gmail.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-03-10scsi: lpfc: Update lpfc_ramp_down_queue_handler() logicJustin Tee2-10/+4
Typically when an out of resource CQE status is detected, the lpfc_ramp_down_queue_handler() logic is called to help reduce I/O load by reducing an sdev's queue_depth. However, the current lpfc_rampdown_queue_depth() logic does not help reduce queue_depth. num_cmd_success is never updated and is always zero, which means new_queue_depth will always be set to sdev->queue_depth. So, new_queue_depth = sdev->queue_depth - new_queue_depth always sets new_queue_depth to zero. And, scsi_change_queue_depth(sdev, 0) is essentially a no-op. Change the lpfc_ramp_down_queue_handler() logic to set new_queue_depth equal to sdev->queue_depth subtracted from number of times num_rsrc_err was incremented. If num_rsrc_err is >= sdev->queue_depth, then set new_queue_depth equal to 1. Eventually, the frequency of Good_Status frames will signal SCSI upper layer to auto increase the queue_depth back to the driver default of 64 via scsi_handle_queue_ramp_up(). Signed-off-by: Justin Tee <justin.tee@broadcom.com> Link: https://lore.kernel.org/r/20240305200503.57317-5-justintee8345@gmail.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-03-10scsi: lpfc: Remove IRQF_ONESHOT flag from threaded IRQ handlingJustin Tee1-1/+1
IRQF_ONESHOT is found to mask HBA generated interrupts when thread_fn is running. As a result, some EQEs/CQEs miss timely processing resulting in SCSI layer attempts to abort commands due to io_timeout. Abort CQEs are also not processed leading to the observations of hangs and spam of "0748 abort handler timed out waiting for aborting I/O" log messages. Remove the IRQF_ONESHOT flag. The cmpxchg and xchg atomic operations on lpfc_queue->queue_claimed already protect potential parallel access to an EQ/CQ should the thread_fn get interrupted by the primary irq handler. Signed-off-by: Justin Tee <justin.tee@broadcom.com> Link: https://lore.kernel.org/r/20240305200503.57317-4-justintee8345@gmail.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-03-10scsi: lpfc: Move NPIV's transport unregistration to after resource clean upJustin Tee1-4/+4
There are cases after NPIV deletion where the fabric switch still believes the NPIV is logged into the fabric. This occurs when a vport is unregistered before the Remove All DA_ID CT and LOGO ELS are sent to the fabric. Currently fc_remove_host(), which calls dev_loss_tmo for all D_IDs including the fabric D_ID, removes the last ndlp reference and frees the ndlp rport object. This sometimes causes the race condition where the final DA_ID and LOGO are skipped from being sent to the fabric switch. Fix by moving the fc_remove_host() and scsi_remove_host() calls after DA_ID and LOGO are sent. Signed-off-by: Justin Tee <justin.tee@broadcom.com> Link: https://lore.kernel.org/r/20240305200503.57317-3-justintee8345@gmail.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-03-10scsi: lpfc: Remove unnecessary log message in queuecommand pathJustin Tee1-10/+0
Message 9038 logs when LLDD receives SCSI_PROT_NORMAL when T10 DIF protection is configured. The event is not wrong, but the log message has not proven useful in debugging so it is removed. Signed-off-by: Justin Tee <justin.tee@broadcom.com> Link: https://lore.kernel.org/r/20240305200503.57317-2-justintee8345@gmail.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-02-05scsi: lpfc: Copyright updates for 14.4.0.0 patchesJustin Tee17-18/+18
Update copyrights to 2024 for files modified in the 14.4.0.0 patch set. Signed-off-by: Justin Tee <justin.tee@broadcom.com> Link: https://lore.kernel.org/r/20240131185112.149731-18-justintee8345@gmail.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-02-05scsi: lpfc: Update lpfc version to 14.4.0.0Justin Tee1-1/+1
Update lpfc version to 14.4.0.0. Signed-off-by: Justin Tee <justin.tee@broadcom.com> Link: https://lore.kernel.org/r/20240131185112.149731-17-justintee8345@gmail.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-02-05scsi: lpfc: Change lpfc_vport load_flag member into a bitmaskJustin Tee10-120/+108
In attempt to reduce the amount of unnecessary shost_lock acquisitions in the lpfc driver, change load_flag into an unsigned long bitmask and use clear_bit/test_bit bitwise atomic APIs instead of reliance on shost_lock for synchronization. Also, correct the test for FC_UNLOADING in lpfc_ct_handle_mibreq, which incorrectly tests vport->fc_flag rather than vport->load_flag. Signed-off-by: Justin Tee <justin.tee@broadcom.com> Link: https://lore.kernel.org/r/20240131185112.149731-16-justintee8345@gmail.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-02-05scsi: lpfc: Change lpfc_vport fc_flag member into a bitmaskJustin Tee11-590/+425
In attempt to reduce the amount of unnecessary shost_lock acquisitions in the lpfc driver, change fc_flag into an unsigned long bitmask and use clear_bit/test_bit bitwise atomic APIs instead of reliance on shost_lock for synchronization. Signed-off-by: Justin Tee <justin.tee@broadcom.com> Link: https://lore.kernel.org/r/20240131185112.149731-15-justintee8345@gmail.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-02-05scsi: lpfc: Protect vport fc_nodes list with an explicit spin lockJustin Tee6-54/+53
In attempt to reduce the amount of unnecessary shost_lock acquisitions in the lpfc driver, replace shost_lock with an explicit fc_nodes_list_lock spinlock when accessing vport->fc_nodes lists. Although vport memory region is owned by shost->hostdata, it is driver private memory and an explicit fc_nodes list lock for fc_nodes list mutations is more appropriate than locking the entire shost. Signed-off-by: Justin Tee <justin.tee@broadcom.com> Link: https://lore.kernel.org/r/20240131185112.149731-14-justintee8345@gmail.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-02-05scsi: lpfc: Change nlp state statistic counters into atomic_tJustin Tee5-37/+50
There is no reason to use the shost_lock to synchronize an LLDD statistics counter. Convert all the nlp state statistic counters into atomic_t. Corresponding zeroing, increments, and reads are converted to atomic versions. Signed-off-by: Justin Tee <justin.tee@broadcom.com> Link: https://lore.kernel.org/r/20240131185112.149731-13-justintee8345@gmail.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-02-05scsi: lpfc: Remove shost_lock protection for fc_host_port shost APIsJustin Tee1-16/+0
Desiring to reduce the amount of unnecessary shost_lock acquisitions in the lpfc driver, it has been determined that there is no need for shost_lock protection when retrieving fc_host port information because it is only for display to user via sysfs. Signed-off-by: Justin Tee <justin.tee@broadcom.com> Link: https://lore.kernel.org/r/20240131185112.149731-12-justintee8345@gmail.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-02-05scsi: lpfc: Move handling of reset congestion statistics eventsJustin Tee2-4/+7
The ACQE notification event to reset congestion statistics should be moved into the specific lpfc_sli4_async_sli_evt() routine instead of being processed from the generic lpfc_sli4_async_event_proc() routine. Signed-off-by: Justin Tee <justin.tee@broadcom.com> Link: https://lore.kernel.org/r/20240131185112.149731-11-justintee8345@gmail.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-02-05scsi: lpfc: Save FPIN frequency statistics upon receipt of peer cgn ↵Justin Tee1-0/+3
notifications FPIN frequency is provided by the fabric in peer congestion notifications. Currently, the frequency is only logged in a message, but it should also be saved into the phba's cgn_fpin statistics member for proper application functionality. Signed-off-by: Justin Tee <justin.tee@broadcom.com> Link: https://lore.kernel.org/r/20240131185112.149731-10-justintee8345@gmail.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-02-05scsi: lpfc: Add condition to delete ndlp object after sending BLS_RJT to an ABTSJustin Tee1-2/+12
The "Nodelist not empty" log message and an accompanying delay may be observed when deleting an NPIV port or unloading the lpfc driver. This can occur due to receipt of an ABTS for which there is no corresponding login context or ndlp allocated. In such cases, the driver allocates a new ndlp object to send a BLS_RJT after which the ndlp object unintentionally remains in the NLP_STE_UNUSED_NODE state forever. Add a check to conditionally remove ndlp's initial reference count when queuing a BLS response. If the initial reference is removed, then set the NLP_DROPPED flag to notify other code paths. Signed-off-by: Justin Tee <justin.tee@broadcom.com> Link: https://lore.kernel.org/r/20240131185112.149731-9-justintee8345@gmail.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-02-05scsi: lpfc: Fix failure to delete vports when discovery is in progressJustin Tee1-4/+4
Requests to delete an NPIV port may fail repeatedly if the initial request is received during discovery. If the FC_UNLOADING load_flag is set, then skip CT response processing for the physical port. This allows discovery processing for other lpfc_vport objects to reach their cmpl routines before deleting the vport. Signed-off-by: Justin Tee <justin.tee@broadcom.com> Link: https://lore.kernel.org/r/20240131185112.149731-8-justintee8345@gmail.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-02-05scsi: lpfc: Remove NLP_RCV_PLOGI early return during RSCN processing for ndlpsJustin Tee1-8/+0
Upon first RSCN receipt of a target server's remote port that is initially acting as an initiator function, the driver marks the ndlp->nlp_type as an initiator role. Then later, when processing an RSCN for a target function role switch, that ndlp remote port is permanently stuck as an initiator role and can never transition to be discovered as an updated target role function. Remove the NLP_RCV_PLOGI early return if statement clause so that the NLP_NPR_2B_DISC flag gets set. This allows for role change detections. Signed-off-by: Justin Tee <justin.tee@broadcom.com> Link: https://lore.kernel.org/r/20240131185112.149731-7-justintee8345@gmail.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-02-05scsi: lpfc: Allow lpfc_plogi_confirm_nport() logic to execute for Fabric nodesJustin Tee1-17/+32
Remove the early return NLP_FABRIC check in lpfc_plogi_confirm_nport() because it is possible for switch domain controllers to change WWPN. As a result, allow lpfc_plogi_confirm_nport() to detect that a new ndlp should be initialized in such cases. The old ndlp object will be cleaned up when dev_loss_tmo callbk executes. Signed-off-by: Justin Tee <justin.tee@broadcom.com> Link: https://lore.kernel.org/r/20240131185112.149731-6-justintee8345@gmail.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-02-05scsi: lpfc: Remove D_ID swap log message from trace event loggerJustin Tee1-1/+1
D_ID swaps are common during cable swaps in a SAN. Thus, there's no reason to log the event at a KERN_ERR level with the trace event logger. Change the log level to KERN_INFO and the normal LOG_ELS flag. Signed-off-by: Justin Tee <justin.tee@broadcom.com> Link: https://lore.kernel.org/r/20240131185112.149731-5-justintee8345@gmail.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-02-05scsi: lpfc: Use sg_dma_len() API to get struct scatterlist's lengthJustin Tee1-4/+4
The sg_dma_len() API should be used to retrieve a scatterlist's length instead of directly accessing scatterlist->length. Signed-off-by: Justin Tee <justin.tee@broadcom.com> Link: https://lore.kernel.org/r/20240131185112.149731-4-justintee8345@gmail.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-02-05scsi: lpfc: Fix possible memory leak in lpfc_rcv_padisc()Justin Tee1-2/+4
The call to lpfc_sli4_resume_rpi() in lpfc_rcv_padisc() may return an unsuccessful status. In such cases, the elsiocb is not issued, the completion is not called, and thus the elsiocb resource is leaked. Check return value after calling lpfc_sli4_resume_rpi() and conditionally release the elsiocb resource. Signed-off-by: Justin Tee <justin.tee@broadcom.com> Link: https://lore.kernel.org/r/20240131185112.149731-3-justintee8345@gmail.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-02-05scsi: lpfc: Initialize status local variable in lpfc_sli4_repost_sgl_list()Justin Tee1-1/+1
A static code analyzer tool indicates that the local variable called status in the lpfc_sli4_repost_sgl_list() routine could be used to print garbage uninitialized values in the routine's log message. Fix by initializing to zero. Signed-off-by: Justin Tee <justin.tee@broadcom.com> Link: https://lore.kernel.org/r/20240131185112.149731-2-justintee8345@gmail.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-01-21Linux 6.8-rc1Linus Torvalds1-2/+2
2024-01-21Merge tag 'bcachefs-2024-01-21' of https://evilpiepirate.org/git/bcachefsLinus Torvalds78-1426/+1629
Pull more bcachefs updates from Kent Overstreet: "Some fixes, Some refactoring, some minor features: - Assorted prep work for disk space accounting rewrite - BTREE_TRIGGER_ATOMIC: after combining our trigger callbacks, this makes our trigger context more explicit - A few fixes to avoid excessive transaction restarts on multithreaded workloads: fstests (in addition to ktest tests) are now checking slowpath counters, and that's shaking out a few bugs - Assorted tracepoint improvements - Starting to break up bcachefs_format.h and move on disk types so they're with the code they belong to; this will make room to start documenting the on disk format better. - A few minor fixes" * tag 'bcachefs-2024-01-21' of https://evilpiepirate.org/git/bcachefs: (46 commits) bcachefs: Improve inode_to_text() bcachefs: logged_ops_format.h bcachefs: reflink_format.h bcachefs; extents_format.h bcachefs: ec_format.h bcachefs: subvolume_format.h bcachefs: snapshot_format.h bcachefs: alloc_background_format.h bcachefs: xattr_format.h bcachefs: dirent_format.h bcachefs: inode_format.h bcachefs; quota_format.h bcachefs: sb-counters_format.h bcachefs: counters.c -> sb-counters.c bcachefs: comment bch_subvolume bcachefs: bch_snapshot::btime bcachefs: add missing __GFP_NOWARN bcachefs: opts->compression can now also be applied in the background bcachefs: Prep work for variable size btree node buffers bcachefs: grab s_umount only if snapshotting ...
2024-01-21Merge tag 'timers-core-2024-01-21' of ↵Linus Torvalds7-12/+41
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer updates from Thomas Gleixner: "Updates for time and clocksources: - A fix for the idle and iowait time accounting vs CPU hotplug. The time is reset on CPU hotplug which makes the accumulated systemwide time jump backwards. - Assorted fixes and improvements for clocksource/event drivers" * tag 'timers-core-2024-01-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: tick-sched: Fix idle and iowait sleeptime accounting vs CPU hotplug clocksource/drivers/ep93xx: Fix error handling during probe clocksource/drivers/cadence-ttc: Fix some kernel-doc warnings clocksource/drivers/timer-ti-dm: Fix make W=n kerneldoc warnings clocksource/timer-riscv: Add riscv_clock_shutdown callback dt-bindings: timer: Add StarFive JH8100 clint dt-bindings: timer: thead,c900-aclint-mtimer: separate mtime and mtimecmp regs
2024-01-21Merge tag 'powerpc-6.8-2' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Aneesh Kumar: - Increase default stack size to 32KB for Book3S Thanks to Michael Ellerman. * tag 'powerpc-6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/64s: Increase default stack size to 32KB
2024-01-21bcachefs: Improve inode_to_text()Kent Overstreet1-7/+18
Add line breaks - inode_to_text() is now much easier to read. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: logged_ops_format.hKent Overstreet2-27/+31
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: reflink_format.hKent Overstreet3-47/+48
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs; extents_format.hKent Overstreet2-279/+284
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: ec_format.hKent Overstreet2-16/+20
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: subvolume_format.hKent Overstreet2-32/+36
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: snapshot_format.hKent Overstreet2-33/+37
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: alloc_background_format.hKent Overstreet2-93/+94
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: xattr_format.hKent Overstreet2-15/+20
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: dirent_format.hKent Overstreet2-39/+43
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: inode_format.hKent Overstreet2-164/+167
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs; quota_format.hKent Overstreet2-42/+48
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: sb-counters_format.hKent Overstreet2-95/+100
bcachefs_format.h has gotten too big; let's do some organizing. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: counters.c -> sb-counters.cKent Overstreet5-8/+7
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: comment bch_subvolumeKent Overstreet1-0/+3
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: bch_snapshot::btimeKent Overstreet2-0/+3
Add a field to bch_snapshot for creation time; this will be important when we start exposing the snapshot tree to userspace. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: add missing __GFP_NOWARNKent Overstreet1-1/+1
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: opts->compression can now also be applied in the backgroundKent Overstreet11-23/+24
The "apply this compression method in the background" paths now use the compression option if background_compression is not set; this means that setting or changing the compression option will cause existing data to be compressed accordingly in the background. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: Prep work for variable size btree node buffersKent Overstreet18-97/+87
bcachefs btree nodes are big - typically 256k - and btree roots are pinned in memory. As we're now up to 18 btrees, we now have significant memory overhead in mostly empty btree roots. And in the future we're going to start enforcing that certain btree node boundaries exist, to solve lock contention issues - analagous to XFS's AGIs. Thus, we need to start allocating smaller btree node buffers when we can. This patch changes code that refers to the filesystem constant c->opts.btree_node_size to refer to the btree node buffer size - btree_buf_bytes() - where appropriate. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: grab s_umount only if snapshottingSu Yue1-6/+5
When I was testing mongodb over bcachefs with compression, there is a lockdep warning when snapshotting mongodb data volume. $ cat test.sh prog=bcachefs $prog subvolume create /mnt/data $prog subvolume create /mnt/data/snapshots while true;do $prog subvolume snapshot /mnt/data /mnt/data/snapshots/$(date +%s) sleep 1s done $ cat /etc/mongodb.conf systemLog: destination: file logAppend: true path: /mnt/data/mongod.log storage: dbPath: /mnt/data/ lockdep reports: [ 3437.452330] ====================================================== [ 3437.452750] WARNING: possible circular locking dependency detected [ 3437.453168] 6.7.0-rc7-custom+ #85 Tainted: G E [ 3437.453562] ------------------------------------------------------ [ 3437.453981] bcachefs/35533 is trying to acquire lock: [ 3437.454325] ffffa0a02b2b1418 (sb_writers#10){.+.+}-{0:0}, at: filename_create+0x62/0x190 [ 3437.454875] but task is already holding lock: [ 3437.455268] ffffa0a02b2b10e0 (&type->s_umount_key#48){.+.+}-{3:3}, at: bch2_fs_file_ioctl+0x232/0xc90 [bcachefs] [ 3437.456009] which lock already depends on the new lock. [ 3437.456553] the existing dependency chain (in reverse order) is: [ 3437.457054] -> #3 (&type->s_umount_key#48){.+.+}-{3:3}: [ 3437.457507] down_read+0x3e/0x170 [ 3437.457772] bch2_fs_file_ioctl+0x232/0xc90 [bcachefs] [ 3437.458206] __x64_sys_ioctl+0x93/0xd0 [ 3437.458498] do_syscall_64+0x42/0xf0 [ 3437.458779] entry_SYSCALL_64_after_hwframe+0x6e/0x76 [ 3437.459155] -> #2 (&c->snapshot_create_lock){++++}-{3:3}: [ 3437.459615] down_read+0x3e/0x170 [ 3437.459878] bch2_truncate+0x82/0x110 [bcachefs] [ 3437.460276] bchfs_truncate+0x254/0x3c0 [bcachefs] [ 3437.460686] notify_change+0x1f1/0x4a0 [ 3437.461283] do_truncate+0x7f/0xd0 [ 3437.461555] path_openat+0xa57/0xce0 [ 3437.461836] do_filp_open+0xb4/0x160 [ 3437.462116] do_sys_openat2+0x91/0xc0 [ 3437.462402] __x64_sys_openat+0x53/0xa0 [ 3437.462701] do_syscall_64+0x42/0xf0 [ 3437.462982] entry_SYSCALL_64_after_hwframe+0x6e/0x76 [ 3437.463359] -> #1 (&sb->s_type->i_mutex_key#15){+.+.}-{3:3}: [ 3437.463843] down_write+0x3b/0xc0 [ 3437.464223] bch2_write_iter+0x5b/0xcc0 [bcachefs] [ 3437.464493] vfs_write+0x21b/0x4c0 [ 3437.464653] ksys_write+0x69/0xf0 [ 3437.464839] do_syscall_64+0x42/0xf0 [ 3437.465009] entry_SYSCALL_64_after_hwframe+0x6e/0x76 [ 3437.465231] -> #0 (sb_writers#10){.+.+}-{0:0}: [ 3437.465471] __lock_acquire+0x1455/0x21b0 [ 3437.465656] lock_acquire+0xc6/0x2b0 [ 3437.465822] mnt_want_write+0x46/0x1a0 [ 3437.465996] filename_create+0x62/0x190 [ 3437.466175] user_path_create+0x2d/0x50 [ 3437.466352] bch2_fs_file_ioctl+0x2ec/0xc90 [bcachefs] [ 3437.466617] __x64_sys_ioctl+0x93/0xd0 [ 3437.466791] do_syscall_64+0x42/0xf0 [ 3437.466957] entry_SYSCALL_64_after_hwframe+0x6e/0x76 [ 3437.467180] other info that might help us debug this: [ 3437.469670] 2 locks held by bcachefs/35533: other info that might help us debug this: [ 3437.467507] Chain exists of: sb_writers#10 --> &c->snapshot_create_lock --> &type->s_umount_key#48 [ 3437.467979] Possible unsafe locking scenario: [ 3437.468223] CPU0 CPU1 [ 3437.468405] ---- ---- [ 3437.468585] rlock(&type->s_umount_key#48); [ 3437.468758] lock(&c->snapshot_create_lock); [ 3437.469030] lock(&type->s_umount_key#48); [ 3437.469291] rlock(sb_writers#10); [ 3437.469434] *** DEADLOCK *** [ 3437.469670] 2 locks held by bcachefs/35533: [ 3437.469838] #0: ffffa0a02ce00a88 (&c->snapshot_create_lock){++++}-{3:3}, at: bch2_fs_file_ioctl+0x1e3/0xc90 [bcachefs] [ 3437.470294] #1: ffffa0a02b2b10e0 (&type->s_umount_key#48){.+.+}-{3:3}, at: bch2_fs_file_ioctl+0x232/0xc90 [bcachefs] [ 3437.470744] stack backtrace: [ 3437.470922] CPU: 7 PID: 35533 Comm: bcachefs Kdump: loaded Tainted: G E 6.7.0-rc7-custom+ #85 [ 3437.471313] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014 [ 3437.471694] Call Trace: [ 3437.471795] <TASK> [ 3437.471884] dump_stack_lvl+0x57/0x90 [ 3437.472035] check_noncircular+0x132/0x150 [ 3437.472202] __lock_acquire+0x1455/0x21b0 [ 3437.472369] lock_acquire+0xc6/0x2b0 [ 3437.472518] ? filename_create+0x62/0x190 [ 3437.472683] ? lock_is_held_type+0x97/0x110 [ 3437.472856] mnt_want_write+0x46/0x1a0 [ 3437.473025] ? filename_create+0x62/0x190 [ 3437.473204] filename_create+0x62/0x190 [ 3437.473380] user_path_create+0x2d/0x50 [ 3437.473555] bch2_fs_file_ioctl+0x2ec/0xc90 [bcachefs] [ 3437.473819] ? lock_acquire+0xc6/0x2b0 [ 3437.474002] ? __fget_files+0x2a/0x190 [ 3437.474195] ? __fget_files+0xbc/0x190 [ 3437.474380] ? lock_release+0xc5/0x270 [ 3437.474567] ? __x64_sys_ioctl+0x93/0xd0 [ 3437.474764] ? __pfx_bch2_fs_file_ioctl+0x10/0x10 [bcachefs] [ 3437.475090] __x64_sys_ioctl+0x93/0xd0 [ 3437.475277] do_syscall_64+0x42/0xf0 [ 3437.475454] entry_SYSCALL_64_after_hwframe+0x6e/0x76 [ 3437.475691] RIP: 0033:0x7f2743c313af ====================================================== In __bch2_ioctl_subvolume_create(), we grab s_umount unconditionally and unlock it at the end of the function. There is a comment "why do we need this lock?" about the lock coming from commit 42d237320e98 ("bcachefs: Snapshot creation, deletion") The reason is that __bch2_ioctl_subvolume_create() calls sync_inodes_sb() which enforce locked s_umount to writeback all dirty nodes before doing snapshot works. Fix it by read locking s_umount for snapshotting only and unlocking s_umount after sync_inodes_sb(). Signed-off-by: Su Yue <glass.su@suse.com> Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: kvfree bch_fs::snapshots in bch2_fs_snapshots_exitSu Yue1-1/+1
bch_fs::snapshots is allocated by kvzalloc in __snapshot_t_mut. It should be freed by kvfree not kfree. Or umount will triger: [ 406.829178 ] BUG: unable to handle page fault for address: ffffe7b487148008 [ 406.830676 ] #PF: supervisor read access in kernel mode [ 406.831643 ] #PF: error_code(0x0000) - not-present page [ 406.832487 ] PGD 0 P4D 0 [ 406.832898 ] Oops: 0000 [#1] PREEMPT SMP PTI [ 406.833512 ] CPU: 2 PID: 1754 Comm: umount Kdump: loaded Tainted: G OE 6.7.0-rc7-custom+ #90 [ 406.834746 ] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014 [ 406.835796 ] RIP: 0010:kfree+0x62/0x140 [ 406.836197 ] Code: 80 48 01 d8 0f 82 e9 00 00 00 48 c7 c2 00 00 00 80 48 2b 15 78 9f 1f 01 48 01 d0 48 c1 e8 0c 48 c1 e0 06 48 03 05 56 9f 1f 01 <48> 8b 50 08 48 89 c7 f6 c2 01 0f 85 b0 00 00 00 66 90 48 8b 07 f6 [ 406.837810 ] RSP: 0018:ffffb9d641607e48 EFLAGS: 00010286 [ 406.838213 ] RAX: ffffe7b487148000 RBX: ffffb9d645200000 RCX: ffffb9d641607dc4 [ 406.838738 ] RDX: 000065bb00000000 RSI: ffffffffc0d88b84 RDI: ffffb9d645200000 [ 406.839217 ] RBP: ffff9a4625d00068 R08: 0000000000000001 R09: 0000000000000001 [ 406.839650 ] R10: 0000000000000001 R11: 000000000000001f R12: ffff9a4625d4da80 [ 406.840055 ] R13: ffff9a4625d00000 R14: ffffffffc0e2eb20 R15: 0000000000000000 [ 406.840451 ] FS: 00007f0a264ffb80(0000) GS:ffff9a4e2d500000(0000) knlGS:0000000000000000 [ 406.840851 ] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 406.841125 ] CR2: ffffe7b487148008 CR3: 000000018c4d2000 CR4: 00000000000006f0 [ 406.841464 ] Call Trace: [ 406.841583 ] <TASK> [ 406.841682 ] ? __die+0x1f/0x70 [ 406.841828 ] ? page_fault_oops+0x159/0x470 [ 406.842014 ] ? fixup_exception+0x22/0x310 [ 406.842198 ] ? exc_page_fault+0x1ed/0x200 [ 406.842382 ] ? asm_exc_page_fault+0x22/0x30 [ 406.842574 ] ? bch2_fs_release+0x54/0x280 [bcachefs] [ 406.842842 ] ? kfree+0x62/0x140 [ 406.842988 ] ? kfree+0x104/0x140 [ 406.843138 ] bch2_fs_release+0x54/0x280 [bcachefs] [ 406.843390 ] kobject_put+0xb7/0x170 [ 406.843552 ] deactivate_locked_super+0x2f/0xa0 [ 406.843756 ] cleanup_mnt+0xba/0x150 [ 406.843917 ] task_work_run+0x59/0xa0 [ 406.844083 ] exit_to_user_mode_prepare+0x197/0x1a0 [ 406.844302 ] syscall_exit_to_user_mode+0x16/0x40 [ 406.844510 ] do_syscall_64+0x4e/0xf0 [ 406.844675 ] entry_SYSCALL_64_after_hwframe+0x6e/0x76 [ 406.844907 ] RIP: 0033:0x7f0a2664e4fb Signed-off-by: Su Yue <glass.su@suse.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: bios must be 512 byte alginedKent Overstreet1-0/+4
Fixes: 023f9ac9f70f bcachefs: Delete dio read alignment check Reported-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Powered by cgit, Gruvboxed by Blaster4385.