aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2024-01-27USB: hub: check for alternate port before enabling A_ALT_HNP_SUPPORTOliver Neukum1-11/+19
The OTG 1.3 spec has the feature A_ALT_HNP_SUPPORT, which tells a device that it is connected to the wrong port. Some devices refuse to operate if you enable that feature, because it indicates to them that they ought to request to be connected to another port. According to the spec this feature may be used based only the following three conditions: 6.5.3 a_alt_hnp_support Setting this feature indicates to the B-device that it is connected to an A-device port that is not capable of HNP, but that the A-device does have an alternate port that is capable of HNP. The A-device is required to set this feature under the following conditions: • the A-device has multiple receptacles • the A-device port that connects to the B-device does not support HNP • the A-device has another port that does support HNP A check for the third and first condition is missing. Add it. Signed-off-by: Oliver Neukum <[email protected]> Cc: stable <[email protected]> Fixes: 7d2d641c44269 ("usb: otg: don't set a_alt_hnp_support feature for OTG 2.0 device") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2024-01-27usb: chipidea: core: handle power lost in workqueueXu Yang2-20/+26
When power is recycled in usb controller during system power management, the controller will recognize it and switch role if role has been changed during power lost. In current design, it will be completed in resume() function. However, this may bring issues since usb class devices have their pm operations too and these device's resume() functions are still not being called at this point. When usb controller recognized host role should be stopped, these usb class devices will be removed at this point. But these usb class devices can't be removed in some cases, such as scsi devices. Since scsi driver may sync data to U-disk, however it will block there because scsi drvier can only handle pm request when is in suspended state. Therefore, there may exist a dependency between ci_resume() and usb class device's resume(). To break this potential dependency, we need to handle power lost work in a workqueue. Fixes: 74494b33211d ("usb: chipidea: core: add controller resume support when controller is powered off") cc: [email protected] Signed-off-by: Xu Yang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2024-01-27usb: dwc3: gadget: Fix NULL pointer dereference in dwc3_gadget_suspendUttkarsh Aggarwal1-4/+2
In current scenario if Plug-out and Plug-In performed continuously there could be a chance while checking for dwc->gadget_driver in dwc3_gadget_suspend, a NULL pointer dereference may occur. Call Stack: CPU1: CPU2: gadget_unbind_driver dwc3_suspend_common dwc3_gadget_stop dwc3_gadget_suspend dwc3_disconnect_gadget CPU1 basically clears the variable and CPU2 checks the variable. Consider CPU1 is running and right before gadget_driver is cleared and in parallel CPU2 executes dwc3_gadget_suspend where it finds dwc->gadget_driver which is not NULL and resumes execution and then CPU1 completes execution. CPU2 executes dwc3_disconnect_gadget where it checks dwc->gadget_driver is already NULL because of which the NULL pointer deference occur. Cc: [email protected] Fixes: 9772b47a4c29 ("usb: dwc3: gadget: Fix suspend/resume during device mode") Acked-by: Thinh Nguyen <[email protected]> Signed-off-by: Uttkarsh Aggarwal <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2024-01-27usb: dwc3: pci: add support for the Intel Arrow Lake-HHeikki Krogerus1-0/+4
This patch adds the necessary PCI ID for Intel Arrow Lake-H devices. Acked-by: Thinh Nguyen <[email protected]> Signed-off-by: Heikki Krogerus <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2024-01-27usb: core: Prevent null pointer dereference in update_port_device_stateUdipto Goswami1-3/+13
Currently, the function update_port_device_state gets the usb_hub from udev->parent by calling usb_hub_to_struct_hub. However, in case the actconfig or the maxchild is 0, the usb_hub would be NULL and upon further accessing to get port_dev would result in null pointer dereference. Fix this by introducing an if check after the usb_hub is populated. Fixes: 83cb2604f641 ("usb: core: add sysfs entry for usb device state") Cc: [email protected] Signed-off-by: Udipto Goswami <[email protected]> Reviewed-by: Alan Stern <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2024-01-27xhci: handle isoc Babble and Buffer Overrun events properlyMichal Pecio1-1/+5
xHCI 4.9 explicitly forbids assuming that the xHC has released its ownership of a multi-TRB TD when it reports an error on one of the early TRBs. Yet the driver makes such assumption and releases the TD, allowing the remaining TRBs to be freed or overwritten by new TDs. The xHC should also report completion of the final TRB due to its IOC flag being set by us, regardless of prior errors. This event cannot be recognized if the TD has already been freed earlier, resulting in "Transfer event TRB DMA ptr not part of current TD" error message. Fix this by reusing the logic for processing isoc Transaction Errors. This also handles hosts which fail to report the final completion. Fix transfer length reporting on Babble errors. They may be caused by device malfunction, no guarantee that the buffer has been filled. Signed-off-by: Michal Pecio <[email protected]> Cc: [email protected] Signed-off-by: Mathias Nyman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2024-01-27xhci: process isoc TD properly when there was a transaction error mid TD.Mathias Nyman2-14/+61
The last TRB of a isoc TD might not trigger an event if there was an error event for a TRB mid TD. This is seen on a NEC Corporation uPD720200 USB 3.0 Host After an error mid a multi-TRB TD the xHC should according to xhci 4.9.1 generate events for passed TRBs with IOC flag set if it proceeds to the next TD. This event is either a copy of the original error, or a "success" transfer event. If that event is missing then the driver and xHC host get out of sync as the driver is still expecting a transfer event for that first TD, while xHC host is already sending events for the next TD in the list. This leads to "Transfer event TRB DMA ptr not part of current TD" messages. As a solution we tag the isoc TDs that get error events mid TD. If an event doesn't match the first TD, then check if the tag is set, and event points to the next TD. In that case give back the fist TD and process the next TD normally Make sure TD status and transferred length stay valid in both cases with and without final TD completion event. Reported-by: Michał Pecio <[email protected]> Closes: https://lore.kernel.org/linux-usb/20240112235205.1259f60c@foxbook/ Tested-by: Michał Pecio <[email protected]> Cc: [email protected] Signed-off-by: Mathias Nyman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2024-01-27xhci: fix off by one check when adding a secondary interrupter.Mathias Nyman1-1/+1
The sanity check of interrupter index when adding a new interrupter is off by one. intr_num needs to be smaller than xhci->max_interrupter to fit the array of interrupters. Luckily this doesn't cause any real word harm as xhci_add_interrupter() is always called with a intr_num value smaller than xhci->max_interrupters in any current kernel. Should not be needed for stable as 6.7 kernel and older only supports one interrupter, with intr_num always being zero. Reported-by: Dan Carpenter <[email protected]> Closes: https://lore.kernel.org/linux-usb/[email protected]/ Fixes: 4bf398e15aa4 ("xhci: split allocate interrupter into separate alloacte and add parts") Signed-off-by: Mathias Nyman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2024-01-27xhci: fix possible null pointer dereference at secondary interrupter removalMathias Nyman1-6/+6
Don't try to remove a secondary interrupter that is known to be invalid. Also check if the interrupter is valid inside the spinlock that protects the array of interrupters. Found by smatch static checker Reported-by: Dan Carpenter <[email protected]> Closes: https://lore.kernel.org/linux-usb/[email protected]/ Fixes: c99b38c41234 ("xhci: add support to allocate several interrupters") Signed-off-by: Mathias Nyman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2024-01-27usb: gadget: ncm: Fix endianness of wMaxSegmentSize variable in ecm_descKrishna Kurapati1-4/+4
Recent commit [1] added support for changing max segment size of the NCM interface via configfs. But the value of segment size value stored in ncm_opts need to be converted to little endian before saving it in ecm_desc. Also while initialising the value of segment size in opts during instance allocation, the value ETH_FRAME_LEN needs to be assigned directly without any conversion as ETH_FRAME_LEN and the variable max_segment_size are native endian. The current implementaion modifies it into little endian thus breaking things for big endian targets. Fix endianness while assigning these variables. While at it, fix up some stray spaces in comments added in code. [1]: https://lore.kernel.org/all/[email protected]/ Fixes: 1900daeefd3e ("usb: gadget: ncm: Add support to update wMaxSegmentSize via configfs") Signed-off-by: Krishna Kurapati <[email protected]> Reviewed-by: Maciej Żenczykowski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2024-01-27usb: host: xhci-plat: Add support for XHCI_SG_TRB_CACHE_SIZE_QUIRKPrashanth K1-0/+3
Upstream commit bac1ec551434 ("usb: xhci: Set quirk for XHCI_SG_TRB_CACHE_SIZE_QUIRK") introduced a new quirk in XHCI which fixes XHC timeout, which was seen on synopsys XHCs while using SG buffers. Currently this quirk can only be set using xhci private data. But there are some drivers like dwc3/host.c which adds adds quirks using software node for xhci device. Hence set this xhci quirk by iterating over device properties. Cc: [email protected] # 5.11 Fixes: bac1ec551434 ("usb: xhci: Set quirk for XHCI_SG_TRB_CACHE_SIZE_QUIRK") Signed-off-by: Prashanth K <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2024-01-27usb: dwc3: host: Set XHCI_SG_TRB_CACHE_SIZE_QUIRKPrashanth K1-1/+3
Upstream commit bac1ec551434 ("usb: xhci: Set quirk for XHCI_SG_TRB_CACHE_SIZE_QUIRK") introduced a new quirk in XHCI which fixes XHC timeout, which was seen on synopsys XHCs while using SG buffers. But the support for this quirk isn't present in the DWC3 layer. We will encounter this XHCI timeout/hung issue if we run iperf loopback tests using RTL8156 ethernet adaptor on DWC3 targets with scatter-gather enabled. This gets resolved after enabling the XHCI_SG_TRB_CACHE_SIZE_QUIRK. This patch enables it using the xhci device property since its needed for DWC3 controller. In Synopsys DWC3 databook, Table 9-3: xHCI Debug Capability Limitations Chained TRBs greater than TRB cache size: The debug capability driver must not create a multi-TRB TD that describes smaller than a 1K packet that spreads across 8 or more TRBs on either the IN TR or the OUT TR. Cc: [email protected] #5.11 Signed-off-by: Prashanth K <[email protected]> Acked-by: Thinh Nguyen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2024-01-27usb: gadget: ncm: Fix indentations in documentation of NCM sectionUdipto Goswami1-11/+11
Currently, the section of NCM which describes attributes are having wrong indentation. Fix this by following the correct format recommended. Fixes: 1900daeefd3e ("usb: gadget: ncm: Add support to update wMaxSegmentSize via configfs") Reported-by: Stephen Rothwell <[email protected]> Closes: https://lore.kernel.org/all/[email protected]/ Signed-off-by: Udipto Goswami <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2024-01-27perf vendor events intel: Alderlake/sapphirerapids metric fixesIan Rogers3-160/+123
As events are deduplicated by name, ensure PMU prefixes are always used in metrics. Previously they may be missed on the first event in a formula. Update metric constraints for architectures with topdown l2 events. Conversion script updated in: https://github.com/intel/perfmon/pull/128 Reported-by: Arnaldo Carvalho de Melo <[email protected]> Reviewed-by: Kan Liang <[email protected]> Signed-off-by: Ian Rogers <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Edward Baker <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Closes: https://lore.kernel.org/lkml/[email protected]/ Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2024-01-27tools headers UAPI: Sync kvm headers with the kernel sourcesArnaldo Carvalho de Melo2-90/+53
To pick the changes in: a5d3df8ae13fada7 ("KVM: remove deprecated UAPIs") 6d72283526090850 ("KVM x86/xen: add an override for PVCLOCK_TSC_STABLE_BIT") 89ea60c2c7b5838b ("KVM: x86: Add support for "protected VMs" that can utilize private memory") 8dd2eee9d526c30f ("KVM: x86/mmu: Handle page fault for private memory") a7800aa80ea4d535 ("KVM: Add KVM_CREATE_GUEST_MEMFD ioctl() for guest-specific backing memory") 5a475554db1e476a ("KVM: Introduce per-page memory attributes") 16f95f3b95caded2 ("KVM: Add KVM_EXIT_MEMORY_FAULT exit to report faults to userspace") bb58b90b1a8f753b ("KVM: Introduce KVM_SET_USER_MEMORY_REGION2") 3f9cd0ca848413fd ("KVM: arm64: Allow userspace to get the writable masks for feature ID registers") That automatically adds support for some new ioctls and remove a bunch of deprecated ones. This ends up making the new binary to forget about the deprecated one, so when used in an older system it will not be able to resolve those codes to strings. $ tools/perf/trace/beauty/kvm_ioctl.sh > before $ cp include/uapi/linux/kvm.h tools/include/uapi/linux/kvm.h $ tools/perf/trace/beauty/kvm_ioctl.sh > after $ diff -u before after --- before 2024-01-27 14:48:16.523014020 -0300 +++ after 2024-01-27 14:48:24.183932866 -0300 @@ -14,6 +14,7 @@ [0x46] = "SET_USER_MEMORY_REGION", [0x47] = "SET_TSS_ADDR", [0x48] = "SET_IDENTITY_MAP_ADDR", + [0x49] = "SET_USER_MEMORY_REGION2", [0x60] = "CREATE_IRQCHIP", [0x61] = "IRQ_LINE", [0x62] = "GET_IRQCHIP", @@ -22,14 +23,8 @@ [0x65] = "GET_PIT", [0x66] = "SET_PIT", [0x67] = "IRQ_LINE_STATUS", - [0x69] = "ASSIGN_PCI_DEVICE", [0x6a] = "SET_GSI_ROUTING", - [0x70] = "ASSIGN_DEV_IRQ", [0x71] = "REINJECT_CONTROL", - [0x72] = "DEASSIGN_PCI_DEVICE", - [0x73] = "ASSIGN_SET_MSIX_NR", - [0x74] = "ASSIGN_SET_MSIX_ENTRY", - [0x75] = "DEASSIGN_DEV_IRQ", [0x76] = "IRQFD", [0x77] = "CREATE_PIT2", [0x78] = "SET_BOOT_CPU_ID", @@ -66,7 +61,6 @@ [0x9f] = "GET_VCPU_EVENTS", [0xa0] = "SET_VCPU_EVENTS", [0xa3] = "ENABLE_CAP", - [0xa4] = "ASSIGN_SET_INTX_MASK", [0xa5] = "SIGNAL_MSI", [0xa6] = "GET_XCRS", [0xa7] = "SET_XCRS", @@ -97,6 +91,8 @@ [0xcd] = "SET_SREGS2", [0xce] = "GET_STATS_FD", [0xd0] = "XEN_HVM_EVTCHN_SEND", + [0xd2] = "SET_MEMORY_ATTRIBUTES", + [0xd4] = "CREATE_GUEST_MEMFD", [0xe0] = "CREATE_DEVICE", [0xe1] = "SET_DEVICE_ATTR", [0xe2] = "GET_DEVICE_ATTR", $ This silences these perf build warnings: Warning: Kernel ABI header differences: diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h diff -u tools/arch/x86/include/uapi/asm/kvm.h arch/x86/include/uapi/asm/kvm.h Cc: Adrian Hunter <[email protected]> Cc: Chao Peng <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jing Zhang <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Oliver Upton <[email protected]> Cc: Paolo Bonzini <[email protected]> Cc: Paul Durrant <[email protected]> Cc: Sean Christopherson <[email protected]> Link: https://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2024-01-27Merge tag 'platform-drivers-x86-v6.8-2' of ↵Linus Torvalds14-177/+460
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver fixes from Hans de Goede: - WMI bus driver fixes - Second attempt (previously reverted) at P2SB PCI rescan deadlock fix - AMD PMF driver improvements - MAINTAINERS updates - Misc other small fixes and hw-id additions * tag 'platform-drivers-x86-v6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: platform/x86: touchscreen_dmi: Add info for the TECLAST X16 Plus tablet platform/x86/intel/ifs: Call release_firmware() when handling errors. platform/x86/amd/pmf: Fix memory leak in amd_pmf_get_pb_data() platform/x86/amd/pmf: Get ambient light information from AMD SFH driver platform/x86/amd/pmf: Get Human presence information from AMD SFH driver platform/mellanox: mlxbf-pmc: Fix offset calculation for crspace events platform/mellanox: mlxbf-tmfifo: Drop Tx network packet when Tx TmFIFO is full MAINTAINERS: remove defunct acpi4asus project info from asus notebooks section MAINTAINERS: add Luke Jones as maintainer for asus notebooks MAINTAINERS: Remove Perry Yuan as DELL WMI HARDWARE PRIVACY SUPPORT maintainer platform/x86: silicom-platform: Add missing "Description:" for power_cycle sysfs attr platform/x86: intel-wmi-sbl-fw-update: Fix function name in error message platform/x86: p2sb: Use pci_resource_n() in p2sb_read_bar0() platform/x86: p2sb: Allow p2sb_bar() calls during PCI device probe platform/x86: intel-uncore-freq: Fix types in sysfs callbacks platform/x86: wmi: Fix wmi_dev_probe() platform/x86: wmi: Fix notify callback locking platform/x86: wmi: Decouple legacy WMI notify handlers from wmi_block_list platform/x86: wmi: Return immediately if an suitable WMI event is found platform/x86: wmi: Fix error handling in legacy WMI notify handler functions
2024-01-27Merge tag 'loongarch-fixes-6.8-1' of ↵Linus Torvalds4-11/+14
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson Pull LoongArch fixes from Huacai Chen: "Fix boot failure on machines with more than 8 nodes, and fix two build errors about KVM" * tag 'loongarch-fixes-6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: LoongArch: KVM: Add returns to SIMD stubs LoongArch: KVM: Fix build due to API changes LoongArch/smp: Call rcutree_report_cpu_starting() at tlb_init()
2024-01-27Merge tag 'xfs-6.8-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds1-10/+17
Pull xfs fix from Chandan Babu: - Fix read only mounts when using fsopen mount API * tag 'xfs-6.8-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: read only mounts with fsopen mount API are busted
2024-01-27Merge tag 'bcachefs-2024-01-26' of https://evilpiepirate.org/git/bcachefsLinus Torvalds10-32/+42
Pull bcachefs fixes from Kent Overstreet: - fix for REQ_OP_FLUSH usage; this fixes filesystems going read only with -EOPNOTSUPP from the block layer. (this really should have gone in with the block layer patch causing the -EOPNOTSUPP, or should have gone in before). - fix an allocation in non-sleepable context - fix one source of srcu lock latency, on devices with terrible discard latency - fix a reattach_inode() issue in fsck * tag 'bcachefs-2024-01-26' of https://evilpiepirate.org/git/bcachefs: bcachefs: __lookup_dirent() works in snapshot, not subvol bcachefs: discard path uses unlock_long() bcachefs: fix incorrect usage of REQ_OP_FLUSH bcachefs: Add gfp flags param to bch2_prt_task_backtrace()
2024-01-27Merge tag '6.8-rc2-smb3-server-fixes' of git://git.samba.org/ksmbdLinus Torvalds3-3/+6
Pull smb server fixes from Steve French: - Fix netlink OOB - Minor kernel doc fix * tag '6.8-rc2-smb3-server-fixes' of git://git.samba.org/ksmbd: ksmbd: fix global oob in ksmbd_nl_policy smb: Fix some kernel-doc comments
2024-01-27Merge tag '6.8-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds13-74/+467
Pull smb client fixes from Steve French: "Nine cifs/smb client fixes - Four network error fixes (three relating to replays of requests that need to be retried, and one fixing some places where we were returning the wrong rc up the stack on network errors) - Two multichannel fixes including locking fix and case where subset of channels need reconnect - netfs integration fixup: share remote i_size with netfslib - Two small cleanups (one for addressing a clang warning)" * tag '6.8-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: fix stray unlock in cifs_chan_skip_or_disable cifs: set replay flag for retries of write command cifs: commands that are retried should have replay flag set cifs: helper function to check replayable error codes cifs: translate network errors on send to -ECONNABORTED cifs: cifs_pick_channel should try selecting active channels cifs: Share server EOF pos with netfslib smb: Work around Clang __bdos() type confusion smb: client: delete "true", "false" defines
2024-01-28modpost: Add '.ltext' and '.ltext.*' to TEXT_SECTIONSNathan Chancellor1-1/+2
After the linked LLVM change, building ARCH=um defconfig results in a segmentation fault in modpost. Prior to commit a23e7584ecf3 ("modpost: unify 'sym' and 'to' in default_mismatch_handler()"), there was a warning: WARNING: modpost: vmlinux.o(__ex_table+0x88): Section mismatch in reference to the .ltext:(unknown) WARNING: modpost: The relocation at __ex_table+0x88 references section ".ltext" which is not in the list of authorized sections. If you're adding a new section and/or if this reference is valid, add ".ltext" to the list of authorized sections to jump to on fault. This can be achieved by adding ".ltext" to OTHER_TEXT_SECTIONS in scripts/mod/modpost.c. The linked LLVM change moves global objects to the '.ltext' (and '.ltext.*' with '-ffunction-sections') sections with '-mcmodel=large', which ARCH=um uses. These sections should be handled just as '.text' and '.text.*' are, so add them to TEXT_SECTIONS. Cc: [email protected] Closes: https://github.com/ClangBuiltLinux/linux/issues/1981 Link: https://github.com/llvm/llvm-project/commit/4bf8a688956a759b7b6b8d94f42d25c13c7af130 Signed-off-by: Nathan Chancellor <[email protected]> Signed-off-by: Masahiro Yamada <[email protected]>
2024-01-28um: Fix adding '-no-pie' for clangNathan Chancellor1-1/+3
The kernel builds with -fno-PIE, so commit 883354afbc10 ("um: link vmlinux with -no-pie") added the compiler linker flag '-no-pie' via cc-option because '-no-pie' was only supported in GCC 6.1.0 and newer. While this works for GCC, this does not work for clang because cc-option uses '-c', which stops the pipeline right before linking, so '-no-pie' is unconsumed and clang warns, causing cc-option to fail just as it would if the option was entirely unsupported: $ clang -Werror -no-pie -c -o /dev/null -x c /dev/null clang-16: error: argument unused during compilation: '-no-pie' [-Werror,-Wunused-command-line-argument] A recent version of clang exposes this because it generates a relocation under '-mcmodel=large' that is not supported in PIE mode: /usr/sbin/ld: init/main.o: relocation R_X86_64_32 against symbol `saved_command_line' can not be used when making a PIE object; recompile with -fPIE /usr/sbin/ld: failed to set dynamic section sizes: bad value clang: error: linker command failed with exit code 1 (use -v to see invocation) Remove the cc-option check altogether. It is wasteful to invoke the compiler to check for '-no-pie' because only one supported compiler version does not support it, GCC 5.x (as it is supported with the minimum version of clang and GCC 6.1.0+). Use a combination of the gcc-min-version macro and CONFIG_CC_IS_CLANG to unconditionally add '-no-pie' with CONFIG_LD_SCRIPT_DYN=y, so that it is enabled with all compilers that support this. Furthermore, using gcc-min-version can help turn this back into LINK-$(CONFIG_LD_SCRIPT_DYN) += -no-pie when the minimum version of GCC is bumped past 6.1.0. Cc: [email protected] Closes: https://github.com/ClangBuiltLinux/linux/issues/1982 Signed-off-by: Nathan Chancellor <[email protected]> Signed-off-by: Masahiro Yamada <[email protected]>
2024-01-28kbuild: defconf: use SRCARCH to find merged configsZhang Bingwu1-4/+4
For some ARCH values, SRCARCH, which should be used for finding arch/ subdirectory, is different from ARCH. Signed-off-by: Zhang Bingwu <[email protected]> Signed-off-by: Masahiro Yamada <[email protected]>
2024-01-27hwmon: (pmbus/mp2975) Correct comment inside 'mp2975_read_byte_data'Konstantin Aladyshev1-4/+3
The current driver code no longer perfrom internal conversion from VID to direct. Instead it configures READ_VOUT using MFR_DC_LOOP_CTRL. Correct the comment message inside the 'mp2975_read_byte_data' function to match the driver logic. Signed-off-by: Konstantin Aladyshev <[email protected]> Fixes: c60fe56c169e ("hwmon: (pmbus/mp2975) Fix driver initialization for MP2975 device") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Guenter Roeck <[email protected]>
2024-01-27mips: Call lose_fpu(0) before initializing fcr31 in mips_set_personality_nanXi Ruoyao1-0/+6
If we still own the FPU after initializing fcr31, when we are preempted the dirty value in the FPU will be read out and stored into fcr31, clobbering our setting. This can cause an improper floating-point environment after execve(). For example: zsh% cat measure.c #include <fenv.h> int main() { return fetestexcept(FE_INEXACT); } zsh% cc measure.c -o measure -lm zsh% echo $((1.0/3)) # raising FE_INEXACT 0.33333333333333331 zsh% while ./measure; do ; done (stopped in seconds) Call lose_fpu(0) before setting fcr31 to prevent this. Closes: https://lore.kernel.org/linux-mips/[email protected]/ Fixes: 9b26616c8d9d ("MIPS: Respect the ISA level in FCSR handling") Cc: [email protected] Signed-off-by: Xi Ruoyao <[email protected]> Signed-off-by: Thomas Bogendoerfer <[email protected]>
2024-01-27MIPS: loongson64: set nid for reserved memblock regionHuang Pei2-0/+5
Commit 61167ad5fecd("mm: pass nid to reserve_bootmem_region()") reveals that reserved memblock regions have no valid node id set, just set it right since loongson64 firmware makes it clear in memory layout info. This works around booting failure on 3A1000+ since commit 61167ad5fecd ("mm: pass nid to reserve_bootmem_region()") under CONFIG_DEFERRED_STRUCT_PAGE_INIT. Signed-off-by: Huang Pei <[email protected]> Signed-off-by: Thomas Bogendoerfer <[email protected]>
2024-01-27Revert "MIPS: loongson64: set nid for reserved memblock region"Thomas Bogendoerfer2-4/+0
This reverts commit ce7b1b97776ec0b068c4dd6b6dbb48ae09a23519. Signed-off-by: Thomas Bogendoerfer <[email protected]>
2024-01-27net: lan966x: Fix port configuration when using SGMII interfaceHoratiu Vultur1-2/+3
In case the interface between the MAC and the PHY is SGMII, then the bit GIGA_MODE on the MAC side needs to be set regardless of the speed at which it is running. Fixes: d28d6d2e37d1 ("net: lan966x: add port module support") Signed-off-by: Horatiu Vultur <[email protected]> Reviewed-by: Maxime Chevallier <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2024-01-27MAINTAINERS: Add connector headers to NETWORKING DRIVERSSimon Horman1-0/+2
Commit 46cf789b68b2 ("connector: Move maintainence under networking drivers umbrella.") moved the connector maintenance but did not include the connector header files. It seems that it has always been implied that these headers were maintained along with the rest of the connector code, both before and after the cited commit. Make this explicit. Signed-off-by: Simon Horman <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2024-01-27batman-adv: mcast: fix memory leak on deleting a batman-adv interfaceLinus Lüssing1-0/+1
The batman-adv multicast tracker TVLV handler is registered for the new batman-adv multicast packet type upon creating a batman-adv interface, but not unregistered again upon the interface's deletion, leading to a memory leak. Fix this memory leak by calling the according TVLV handler unregister routine for the multicast tracker TVLV upon batman-adv interface deletion. Fixes: 07afe1ba288c ("batman-adv: mcast: implement multicast packet reception and forwarding") Reported-and-tested-by: [email protected] Closes: https://lore.kernel.org/all/[email protected]/ Signed-off-by: Linus Lüssing <[email protected]> Signed-off-by: Sven Eckelmann <[email protected]> Signed-off-by: Simon Wunderlich <[email protected]>
2024-01-27batman-adv: mcast: fix mcast packet type counter on timeouted nodesLinus Lüssing1-0/+2
When a node which does not have the new batman-adv multicast packet type capability vanishes then the according, global counter erroneously would not be reduced in response on other nodes. Which in turn leads to the mesh never switching back to sending with the new multicast packet type. Fix this by reducing the according counter when such a node times out. Fixes: 90039133221e ("batman-adv: mcast: implement multicast packet generation") Signed-off-by: Linus Lüssing <[email protected]> Signed-off-by: Sven Eckelmann <[email protected]> Signed-off-by: Simon Wunderlich <[email protected]>
2024-01-26ipmr: fix kernel panic when forwarding mcast packetsNicolas Dichtel5-6/+8
The stacktrace was: [ 86.305548] BUG: kernel NULL pointer dereference, address: 0000000000000092 [ 86.306815] #PF: supervisor read access in kernel mode [ 86.307717] #PF: error_code(0x0000) - not-present page [ 86.308624] PGD 0 P4D 0 [ 86.309091] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 86.309883] CPU: 2 PID: 3139 Comm: pimd Tainted: G U 6.8.0-6wind-knet #1 [ 86.311027] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.1-0-g0551a4be2c-prebuilt.qemu-project.org 04/01/2014 [ 86.312728] RIP: 0010:ip_mr_forward (/build/work/knet/net/ipv4/ipmr.c:1985) [ 86.313399] Code: f9 1f 0f 87 85 03 00 00 48 8d 04 5b 48 8d 04 83 49 8d 44 c5 00 48 8b 40 70 48 39 c2 0f 84 d9 00 00 00 49 8b 46 58 48 83 e0 fe <80> b8 92 00 00 00 00 0f 84 55 ff ff ff 49 83 47 38 01 45 85 e4 0f [ 86.316565] RSP: 0018:ffffad21c0583ae0 EFLAGS: 00010246 [ 86.317497] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 86.318596] RDX: ffff9559cb46c000 RSI: 0000000000000000 RDI: 0000000000000000 [ 86.319627] RBP: ffffad21c0583b30 R08: 0000000000000000 R09: 0000000000000000 [ 86.320650] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000001 [ 86.321672] R13: ffff9559c093a000 R14: ffff9559cc00b800 R15: ffff9559c09c1d80 [ 86.322873] FS: 00007f85db661980(0000) GS:ffff955a79d00000(0000) knlGS:0000000000000000 [ 86.324291] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 86.325314] CR2: 0000000000000092 CR3: 000000002f13a000 CR4: 0000000000350ef0 [ 86.326589] Call Trace: [ 86.327036] <TASK> [ 86.327434] ? show_regs (/build/work/knet/arch/x86/kernel/dumpstack.c:479) [ 86.328049] ? __die (/build/work/knet/arch/x86/kernel/dumpstack.c:421 /build/work/knet/arch/x86/kernel/dumpstack.c:434) [ 86.328508] ? page_fault_oops (/build/work/knet/arch/x86/mm/fault.c:707) [ 86.329107] ? do_user_addr_fault (/build/work/knet/arch/x86/mm/fault.c:1264) [ 86.329756] ? srso_return_thunk (/build/work/knet/arch/x86/lib/retpoline.S:223) [ 86.330350] ? __irq_work_queue_local (/build/work/knet/kernel/irq_work.c:111 (discriminator 1)) [ 86.331013] ? exc_page_fault (/build/work/knet/./arch/x86/include/asm/paravirt.h:693 /build/work/knet/arch/x86/mm/fault.c:1515 /build/work/knet/arch/x86/mm/fault.c:1563) [ 86.331702] ? asm_exc_page_fault (/build/work/knet/./arch/x86/include/asm/idtentry.h:570) [ 86.332468] ? ip_mr_forward (/build/work/knet/net/ipv4/ipmr.c:1985) [ 86.333183] ? srso_return_thunk (/build/work/knet/arch/x86/lib/retpoline.S:223) [ 86.333920] ipmr_mfc_add (/build/work/knet/./include/linux/rcupdate.h:782 /build/work/knet/net/ipv4/ipmr.c:1009 /build/work/knet/net/ipv4/ipmr.c:1273) [ 86.334583] ? __pfx_ipmr_hash_cmp (/build/work/knet/net/ipv4/ipmr.c:363) [ 86.335357] ip_mroute_setsockopt (/build/work/knet/net/ipv4/ipmr.c:1470) [ 86.336135] ? srso_return_thunk (/build/work/knet/arch/x86/lib/retpoline.S:223) [ 86.336854] ? ip_mroute_setsockopt (/build/work/knet/net/ipv4/ipmr.c:1470) [ 86.337679] do_ip_setsockopt (/build/work/knet/net/ipv4/ip_sockglue.c:944) [ 86.338408] ? __pfx_unix_stream_read_actor (/build/work/knet/net/unix/af_unix.c:2862) [ 86.339232] ? srso_return_thunk (/build/work/knet/arch/x86/lib/retpoline.S:223) [ 86.339809] ? aa_sk_perm (/build/work/knet/security/apparmor/include/cred.h:153 /build/work/knet/security/apparmor/net.c:181) [ 86.340342] ip_setsockopt (/build/work/knet/net/ipv4/ip_sockglue.c:1415) [ 86.340859] raw_setsockopt (/build/work/knet/net/ipv4/raw.c:836) [ 86.341408] ? security_socket_setsockopt (/build/work/knet/security/security.c:4561 (discriminator 13)) [ 86.342116] sock_common_setsockopt (/build/work/knet/net/core/sock.c:3716) [ 86.342747] do_sock_setsockopt (/build/work/knet/net/socket.c:2313) [ 86.343363] __sys_setsockopt (/build/work/knet/./include/linux/file.h:32 /build/work/knet/net/socket.c:2336) [ 86.344020] __x64_sys_setsockopt (/build/work/knet/net/socket.c:2340) [ 86.344766] do_syscall_64 (/build/work/knet/arch/x86/entry/common.c:52 /build/work/knet/arch/x86/entry/common.c:83) [ 86.345433] ? srso_return_thunk (/build/work/knet/arch/x86/lib/retpoline.S:223) [ 86.346161] ? syscall_exit_work (/build/work/knet/./include/linux/audit.h:357 /build/work/knet/kernel/entry/common.c:160) [ 86.346938] ? srso_return_thunk (/build/work/knet/arch/x86/lib/retpoline.S:223) [ 86.347657] ? syscall_exit_to_user_mode (/build/work/knet/kernel/entry/common.c:215) [ 86.348538] ? srso_return_thunk (/build/work/knet/arch/x86/lib/retpoline.S:223) [ 86.349262] ? do_syscall_64 (/build/work/knet/./arch/x86/include/asm/cpufeature.h:171 /build/work/knet/arch/x86/entry/common.c:98) [ 86.349971] entry_SYSCALL_64_after_hwframe (/build/work/knet/arch/x86/entry/entry_64.S:129) The original packet in ipmr_cache_report() may be queued and then forwarded with ip_mr_forward(). This last function has the assumption that the skb dst is set. After the below commit, the skb dst is dropped by ipv4_pktinfo_prepare(), which causes the oops. Fixes: bb7403655b3c ("ipmr: support IP_PKTINFO on cache report IGMP msg") Signed-off-by: Nicolas Dichtel <[email protected]> Reviewed-by: Eric Dumazet <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-01-27erofs: relaxed temporary buffers allocation on readaheadChunhai Guo5-20/+42
Even with inplace decompression, sometimes very few temporary buffers may be still needed for a single decompression shot (e.g. 16 pages for 64k sliding window or 4 pages for 16k sliding window). In low-memory scenarios, it would be better to try to allocate with GFP_NOWAIT on readahead first. That can help reduce the time spent on page allocation under durative memory pressure. Here are detailed performance numbers under multi-app launch benchmark workload [1] on ARM64 Android devices (8-core CPU and 8GB of memory) running a 5.15 LTS kernel with EROFS of 4k pclusters: +----------------------------------------------+ | LZ4 | vanilla | patched | diff | |----------------+---------+---------+---------| | Average (ms) | 3364 | 2684 | -20.21% | [64k sliding window] |----------------+---------+---------+---------| | Average (ms) | 2079 | 1610 | -22.56% | [16k sliding window] +----------------------------------------------+ The total size of system images for 4k pclusters is almost unchanged: (64k sliding window) 9,117,044 KB (16k sliding window) 9,113,096 KB Therefore, in addition to switch the sliding window from 64k to 16k, after applying this patch, it can eventually save 52.14% (3364 -> 1610) on average with no memory reservation. That is particularly useful for embedded devices with limited resources. [1] https://lore.kernel.org/r/[email protected] Suggested-by: Gao Xiang <[email protected]> Signed-off-by: Chunhai Guo <[email protected]> Signed-off-by: Gao Xiang <[email protected]> Reviewed-by: Yue Hu <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2024-01-26Merge tag 'ata-6.8-rc2' of ↵Linus Torvalds4-8/+31
git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux Pull ata updates from Niklas Cassel: - Fix an incorrect link_power_management_policy sysfs attribute value. We were previously using the same attribute value for two different LPM policies (me) - Add a ASMedia ASM1166 quirk. The SATA host controller always reports that it has 32 ports, even though it only has six ports. Add a quirk that overrides the value reported by the controller (Conrad) - Add a ASMedia ASM1061 quirk. The SATA host controller completely ignores the upper 21 bits of the DMA address. This causes IOMMU error events when a (valid) DMA address actually has any of the upper 21 bits set. Add a quirk that limits the dma_mask to 43-bits (Lennert) * tag 'ata-6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux: ahci: add 43-bit DMA address quirk for ASMedia ASM1061 controllers ahci: asm1166: correct count of reported ports ata: libata-sata: improve sysfs description for ATA_LPM_UNKNOWN
2024-01-26Merge tag 'block-6.8-2024-01-26' of git://git.kernel.dk/linuxLinus Torvalds5-7/+20
Pull block fixes from Jens Axboe: - RCU warning fix for md (Mikulas) - Fix for an aoe issue that lockdep rightfully complained about (Maksim) - Fix for an error code change in partitioning that caused a regression with some tools (Li) - Fix for a data direction warning with bi-direction commands (Christian) * tag 'block-6.8-2024-01-26' of git://git.kernel.dk/linux: md: fix a suspicious RCU usage warning aoe: avoid potential deadlock at set_capacity block: Fix WARNING in _copy_from_iter block: Move checking GENHD_FL_NO_PART to bdev_add_partition()
2024-01-26Merge tag 'io_uring-6.8-2024-01-26' of git://git.kernel.dk/linuxLinus Torvalds2-1/+4
Pull io_uring fix from Jens Axboe: "Just a single tweak to the newly added IORING_OP_FIXED_FD_INSTALL from Paul, ensuring it goes via the audit path and playing it safe by excluding it from using registered creds" * tag 'io_uring-6.8-2024-01-26' of git://git.kernel.dk/linux: io_uring: enable audit and restrict cred override for IORING_OP_FIXED_FD_INSTALL
2024-01-26Merge tag 'thermal-6.8-rc2' of ↵Linus Torvalds1-32/+0
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull thermal control update from Rafael Wysocki: "Remove some dead code from the Intel powerclamp thermal control driver (Srinivas Pandruvada)" * tag 'thermal-6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: thermal: intel: powerclamp: Remove dead code for target mwait value
2024-01-26Merge tag 'pm-6.8-rc2' of ↵Linus Torvalds3-26/+38
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "These fix two cpufreq drivers and the cpupower utility. Specifics: - Fix the handling of scaling_max/min_freq sysfs attributes in the AMD P-state cpufreq driver (Mario Limonciello) - Make the intel_pstate cpufreq driver avoid unnecessary computation of the HWP performance level corresponding to a given frequency in the cases when it is known already, which also helps to avoid reducing the maximum CPU capacity artificially on some systems (Rafael J. Wysocki) - Fix compilation of the cpupower utility when CFLAGS is passed as a make argument for cpupower, but it does not take effect as expected due to mishandling (Stanley Chan)" * tag 'pm-6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq/amd-pstate: Fix setting scaling max/min freq values cpufreq: intel_pstate: Refine computation of P-state for given frequency tools cpupower bench: Override CFLAGS assignments
2024-01-26Merge tag 'docs-6.8-fixes' of git://git.lwn.net/linuxLinus Torvalds4-18/+11
Pull documentation fixes from Jonathan Corbet: "A handful of relatively boring documentation fixes" * tag 'docs-6.8-fixes' of git://git.lwn.net/linux: docs: admin-guide: remove obsolete advice related to SLAB allocator doc: admin-guide/kernel-parameters: remove useless comment docs/accel: correct links to mailing list archives docs/sphinx: Fix TOC scroll hack for the home page
2024-01-26lsm: fix the logic in security_inode_getsecctx()Ondrej Mosnacek1-1/+13
The inode_getsecctx LSM hook has previously been corrected to have -EOPNOTSUPP instead of 0 as the default return value to fix BPF LSM behavior. However, the call_int_hook()-generated loop in security_inode_getsecctx() was left treating 0 as the neutral value, so after an LSM returns 0, the loop continues to try other LSMs, and if one of them returns a non-zero value, the function immediately returns with said value. So in a situation where SELinux and the BPF LSMs registered this hook, -EOPNOTSUPP would be incorrectly returned whenever SELinux returned 0. Fix this by open-coding the call_int_hook() loop and making it use the correct LSM_RET_DEFAULT() value as the neutral one, similar to what other hooks do. Cc: [email protected] Reported-by: Stephen Smalley <[email protected]> Link: https://lore.kernel.org/selinux/CAEjxPJ4ev-pasUwGx48fDhnmjBnq_Wh90jYPwRQRAqXxmOKD4Q@mail.gmail.com/ Link: https://bugzilla.redhat.com/show_bug.cgi?id=2257983 Fixes: b36995b8609a ("lsm: fix default return value for inode_getsecctx") Signed-off-by: Ondrej Mosnacek <[email protected]> Reviewed-by: Casey Schaufler <[email protected]> [PM: subject line tweak] Signed-off-by: Paul Moore <[email protected]>
2024-01-26net: dsa: mt7530: fix 10M/100M speed on MT7988 switchDaniel Golle1-2/+1
Setup PMCR port register for actual speed and duplex on internally connected PHYs of the MT7988 built-in switch. This fixes links with speeds other than 1000M. Fixes: 110c18bfed41 ("net: dsa: mt7530: introduce driver for MT7988 built-in switch") Signed-off-by: Daniel Golle <[email protected]> Reviewed-by: Vladimir Oltean <[email protected]> Acked-by: Arınç ÜNAL <[email protected]> Link: https://lore.kernel.org/r/a5b04dfa8256d8302f402545a51ac4c626fdba25.1706071272.git.daniel@makrotopia.org Signed-off-by: Jakub Kicinski <[email protected]>
2024-01-26ip6_tunnel: make sure to pull inner header in __ip6_tnl_rcv()Eric Dumazet1-3/+18
syzbot found __ip6_tnl_rcv() could access unitiliazed data [1]. Call pskb_inet_may_pull() to fix this, and initialize ipv6h variable after this call as it can change skb->head. [1] BUG: KMSAN: uninit-value in __INET_ECN_decapsulate include/net/inet_ecn.h:253 [inline] BUG: KMSAN: uninit-value in INET_ECN_decapsulate include/net/inet_ecn.h:275 [inline] BUG: KMSAN: uninit-value in IP6_ECN_decapsulate+0x7df/0x1e50 include/net/inet_ecn.h:321 __INET_ECN_decapsulate include/net/inet_ecn.h:253 [inline] INET_ECN_decapsulate include/net/inet_ecn.h:275 [inline] IP6_ECN_decapsulate+0x7df/0x1e50 include/net/inet_ecn.h:321 ip6ip6_dscp_ecn_decapsulate+0x178/0x1b0 net/ipv6/ip6_tunnel.c:727 __ip6_tnl_rcv+0xd4e/0x1590 net/ipv6/ip6_tunnel.c:845 ip6_tnl_rcv+0xce/0x100 net/ipv6/ip6_tunnel.c:888 gre_rcv+0x143f/0x1870 ip6_protocol_deliver_rcu+0xda6/0x2a60 net/ipv6/ip6_input.c:438 ip6_input_finish net/ipv6/ip6_input.c:483 [inline] NF_HOOK include/linux/netfilter.h:314 [inline] ip6_input+0x15d/0x430 net/ipv6/ip6_input.c:492 ip6_mc_input+0xa7e/0xc80 net/ipv6/ip6_input.c:586 dst_input include/net/dst.h:461 [inline] ip6_rcv_finish+0x5db/0x870 net/ipv6/ip6_input.c:79 NF_HOOK include/linux/netfilter.h:314 [inline] ipv6_rcv+0xda/0x390 net/ipv6/ip6_input.c:310 __netif_receive_skb_one_core net/core/dev.c:5532 [inline] __netif_receive_skb+0x1a6/0x5a0 net/core/dev.c:5646 netif_receive_skb_internal net/core/dev.c:5732 [inline] netif_receive_skb+0x58/0x660 net/core/dev.c:5791 tun_rx_batched+0x3ee/0x980 drivers/net/tun.c:1555 tun_get_user+0x53af/0x66d0 drivers/net/tun.c:2002 tun_chr_write_iter+0x3af/0x5d0 drivers/net/tun.c:2048 call_write_iter include/linux/fs.h:2084 [inline] new_sync_write fs/read_write.c:497 [inline] vfs_write+0x786/0x1200 fs/read_write.c:590 ksys_write+0x20f/0x4c0 fs/read_write.c:643 __do_sys_write fs/read_write.c:655 [inline] __se_sys_write fs/read_write.c:652 [inline] __x64_sys_write+0x93/0xd0 fs/read_write.c:652 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0x6d/0x140 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b Uninit was created at: slab_post_alloc_hook+0x129/0xa70 mm/slab.h:768 slab_alloc_node mm/slub.c:3478 [inline] kmem_cache_alloc_node+0x5e9/0xb10 mm/slub.c:3523 kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:560 __alloc_skb+0x318/0x740 net/core/skbuff.c:651 alloc_skb include/linux/skbuff.h:1286 [inline] alloc_skb_with_frags+0xc8/0xbd0 net/core/skbuff.c:6334 sock_alloc_send_pskb+0xa80/0xbf0 net/core/sock.c:2787 tun_alloc_skb drivers/net/tun.c:1531 [inline] tun_get_user+0x1e8a/0x66d0 drivers/net/tun.c:1846 tun_chr_write_iter+0x3af/0x5d0 drivers/net/tun.c:2048 call_write_iter include/linux/fs.h:2084 [inline] new_sync_write fs/read_write.c:497 [inline] vfs_write+0x786/0x1200 fs/read_write.c:590 ksys_write+0x20f/0x4c0 fs/read_write.c:643 __do_sys_write fs/read_write.c:655 [inline] __se_sys_write fs/read_write.c:652 [inline] __x64_sys_write+0x93/0xd0 fs/read_write.c:652 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0x6d/0x140 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b CPU: 0 PID: 5034 Comm: syz-executor331 Not tainted 6.7.0-syzkaller-00562-g9f8413c4a66f #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/17/2023 Fixes: 0d3c703a9d17 ("ipv6: Cleanup IPv6 tunnel receive path") Reported-by: syzbot <[email protected]> Signed-off-by: Eric Dumazet <[email protected]> Reviewed-by: Simon Horman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-01-26selftests: net: give more time for GRO aggregationPaolo Abeni1-1/+1
The gro.sh test-case relay on the gro_flush_timeout to ensure that all the segments belonging to any given batch are properly aggregated. The other end, the sender is a user-space program transmitting each packet with a separate write syscall. A busy host and/or stracing the sender program can make the relevant segments reach the GRO engine after the flush timeout triggers. Give the GRO flush timeout more slack, to avoid sporadic self-tests failures. Fixes: 9af771d2ec04 ("selftests/net: allow GRO coalesce test on veth") Signed-off-by: Paolo Abeni <[email protected]> Reviewed-by: Eric Dumazet <[email protected]> Tested-by: Eric Dumazet <[email protected]> Link: https://lore.kernel.org/r/bffec2beab3a5672dd13ecabe4fad81d2155b367.1706206101.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski <[email protected]>
2024-01-26selftests: net: add missing required classifierPaolo Abeni1-0/+1
the udpgro_fraglist self-test uses the BPF classifiers, but the current net self-test configuration does not include it, causing CI failures: # selftests: net: udpgro_frglist.sh # ipv6 # tcp - over veth touching data # -l 4 -6 -D 2001:db8::1 -t rx -4 -t # Error: TC classifier not found. # We have an error talking to the kernel # Error: TC classifier not found. # We have an error talking to the kernel Add the missing knob. Fixes: edae34a3ed92 ("selftests net: add UDP GRO fraglist + bpf self-tests") Signed-off-by: Paolo Abeni <[email protected]> Reviewed-by: Maciej Żenczykowski <[email protected]> Reviewed-by: Eric Dumazet <[email protected]> Link: https://lore.kernel.org/r/7c3643763b331e9a400e1874fe089193c99a1c3f.1706170897.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski <[email protected]>
2024-01-26bnxt_en: Make PTP timestamp HWRM more silentBreno Leitao1-1/+1
commit 056bce63c469 ("bnxt_en: Make PTP TX timestamp HWRM query silent") changed a netdev_err() to netdev_WARN_ONCE(). netdev_WARN_ONCE() is it generates a kernel WARNING, which is bad, for the following reasons: * You do not a kernel warning if the firmware queries are late * In busy networks, timestamp query failures fairly regularly * A WARNING message doesn't bring much value, since the code path is clear. (This was discussed in-depth in [1]) Transform the netdev_WARN_ONCE() into a netdev_warn_once(), and print a more well-behaved message, instead of a full WARN(). bnxt_en 0000:67:00.0 eth0: TS query for TX timer failed rc = fffffff5 [1] Link: https://lore.kernel.org/all/ZbDj%[email protected]/ Signed-off-by: Breno Leitao <[email protected]> Reviewed-by: Pavan Chebbi <[email protected]> Reviewed-by: Michael Chan <[email protected]> Fixes: 056bce63c469 ("bnxt_en: Make PTP TX timestamp HWRM query silent") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-01-26net/smc: fix incorrect SMC-D link group matching logicWen Gu1-3/+9
The logic to determine if SMC-D link group matches is incorrect. The correct logic should be that it only returns true when the GID is the same, and the SMC-D device is the same and the extended GID is the same (in the case of virtual ISM). It can be fixed by adding brackets around the conditional (or ternary) operator expression. But for better readability and maintainability, it has been changed to an if-else statement. Reported-by: Matthew Rosato <[email protected]> Closes: https://lore.kernel.org/r/[email protected] Fixes: b40584d14570 ("net/smc: compatible with 128-bits extended GID of virtual ISM device") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Wen Gu <[email protected]> Reviewed-by: Alexandra Winter <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-01-26Merge tag 'drm-fixes-2024-01-27' of git://anongit.freedesktop.org/drm/drmLinus Torvalds71-465/+736
Pull drm fixes from Dave Airlie: "Lots going on for rc2, ivpu has a bunch of stabilisation and debugging work, then amdgpu and xe are the main fixes. i915, exynos have a few, then some misc panel and bridge fixes. Worth mentioning are three regressions. One of the nouveau fixes in 6.7 for a serious deadlock had side effects, so I guess we will bring back the deadlock until I can figure out what should be done properly. There was a scheduler regression vs amdgpu which was reported in a few places and is now fixed. There was an i915 vs simpledrm problem resulting in black screens, that is reverted also. I'll be working on a proper nouveau fix, it kinda looks like one of those cases where someone tried to use an atomic where they should have probably used a lock, but I'll see. fb: - fix simpledrm/i915 regression by reverting change scheduler: - fix regression affecting amdgpu users due to sched draining nouveau: - revert 6.7 deadlock fix as it has side effects dp: - fix documentation warning ttm: - fix dummy page read on some platforms bridge: - anx7625 suspend fix - sii902x: fix probing and audio registration - parade-ps8640: fix suspend of bridge, aux fixes - samsung-dsim: avoid using FORCE_STOP_STATE panel: - simple add missing bus flags - fix samsung-s6d7aa0 flags amdgpu: - AC/DC power supply tracking fix - Don't show invalid vram vendor data - SMU 13.0.x fixes - GART fix for umr on systems without VRAM - GFX 10/11 UNORD_DISPATCH fixes - IPS display fixes (required for S0ix on some platforms) - Misc fixes i915: - DSI sequence revert to fix GitLab #10071 and DP test-pattern fix - Drop -Wstringop-overflow (broken on GCC11) ivpu: - fix recovery/reset support - improve submit ioctl stability - fix dev open/close races on unbind - PLL disable reset fix - deprecate context priority param - improve debug buffer logging - disable buffer sharing across VPU contexts - free buffer sgt on unbind - fix missing lock around shmem vmap - add better boot diagnostics - add more debug prints around mapping - dump MMU events in case of timeout v3d: - NULL ptr dereference fix exynos: - fix stack usage - fix incorrect type - fix dt typo - fix gsc runtime resume xe: - Make an ops struct static - Fix an implicit 0 to NULL conversion - A couple of 32-bit fixes - A migration coherency fix for Lunar Lake. - An error path vm id leak fix - Remove PVC references in kunit tests" * tag 'drm-fixes-2024-01-27' of git://anongit.freedesktop.org/drm/drm: (66 commits) Revert "nouveau: push event block/allowing out of the fence context" drm: bridge: samsung-dsim: Don't use FORCE_STOP_STATE drm/sched: Drain all entities in DRM sched run job worker drm/amd/display: "Enable IPS by default" drm/amd: Add a DC debug mask for IPS drm/amd/display: Disable ips before dc interrupt setting drm/amd/display: Replay + IPS + ABM in Full Screen VPB drm/amd/display: Add IPS checks before dcn register access drm/amd/display: Add Replay IPS register for DMUB command table drm/amd/display: Allow IPS2 during Replay drm/amdgpu/gfx11: set UNORD_DISPATCH in compute MQDs drm/amdgpu/gfx10: set UNORD_DISPATCH in compute MQDs drm/amd/amdgpu: Assign GART pages to AMD device mapping drm/amd/pm: Fetch current power limit from FW drm/amdgpu: Fix null pointer dereference drm/amdgpu: Show vram vendor only if available drm/amd/pm: update the power cap setting drm/amdgpu: Avoid fetching vram vendor information drm/amdgpu/pm: Fix the power source flag error drm/amd/display: Fix uninitialized variable usage in core_link_ 'read_dpcd() & write_dpcd()' functions ...
2024-01-26Revert "power: supply: qcom_battmgr: Register the power supplies after PDR ↵Johan Hovold1-60/+49
is up" This reverts commit b43f7ddc2b7a5a90447d96cb4d3c6d142dd4a810. The offending commit deferred power-supply class device registration until the service-started notification is received. This triggers a NULL pointer dereference during boot of the Lenovo ThinkPad X13s and SC8280XP CRD as battery status notifications can be received before the service-start notification: Unable to handle kernel NULL pointer dereference at virtual address 00000000000005c0 ... Call trace: _acquire+0x338/0x2064 acquire+0x1e8/0x318 spin_lock_irqsave+0x60/0x88 _supply_changed+0x2c/0xa4 battmgr_callback+0x1d4/0x60c [qcom_battmgr] pmic_glink_rpmsg_callback+0x5c/0xa4 [pmic_glink] qcom_glink_native_rx+0x58c/0x7e8 qcom_glink_smem_intr+0x14/0x24 [qcom_glink_smem] __handle_irq_event_percpu+0xb0/0x2d4 handle_irq_event+0x4c/0xb8 As trying to serialise this is non-trivial and risks missing notifications, let's revert to registration during probe so that the driver data is all set up once the service goes live. The warning message during resume in case the aDSP firmware is not running that motivated the change can be considered a feature and should not be suppressed. Fixes: b43f7ddc2b7a ("power: supply: qcom_battmgr: Register the power supplies after PDR is up") Signed-off-by: Johan Hovold <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sebastian Reichel <[email protected]>
2024-01-26Merge tag 'asm-generic-6.8-2' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull asm-generic update from Arnd Bergmann: "Just one patch this time, adding Andreas Larsson as co-maintainer for arch/sparc. He is volunteering to help since David Miller has become much less active over the past few years. In turn, I'm helping Andreas get set up as a new maintainer, starting with the entry in the MAINTAINERS file" * tag 'asm-generic-6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: MAINTAINERS: Add Andreas Larsson as co-maintainer for arch/sparc
Powered by cgit, Gruvboxed by Blaster4385.