Age | Commit message (Collapse) | Author | Files | Lines |
|
We have to validate all tables in the transaction that are in
VALIDATE_DO state, the blamed commit below did not move the break
statement to its right location so we only validate one table.
Moreover, we can't init table->validate to _SKIP when a table object
is allocated.
If we do, then if a transcaction creates a new table and then
fails the transaction, nfnetlink will loop and nft will hang until
user cancels the command.
Add back the pernet state as a place to stash the last state encountered.
This is either _DO (we hit an error during commit validation) or _SKIP
(transaction passed all checks).
Fixes: 00c320f9b755 ("netfilter: nf_tables: make validation state per table")
Reported-by: Pablo Neira Ayuso <[email protected]>
Signed-off-by: Florian Westphal <[email protected]>
|
|
Use the builtin_misc_device macro to simplify the code, which is the same
as declaring with device_initcall().
Signed-off-by: Li Zetao <[email protected]>
Acked-by: Niklas Schnelle <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Niklas Schnelle <[email protected]>
Signed-off-by: Heiko Carstens <[email protected]>
|
|
Tony Krowiak says:
===================
This patch series is for the changes required in the vfio_ap device
driver to facilitate pass-through of crypto devices to a secure
execution guest. In particular, it is critical that no data from the
queues passed through to the SE guest is leaked when the guest is
destroyed. There are also some new response codes returned from the
PQAP(ZAPQ) and PQAP(TAPQ) commands that have been added to the
architecture in support of pass-through of crypto devices to SE guests;
these need to be accounted for when handling the reset of queues.
===================
Signed-off-by: Heiko Carstens <[email protected]>
|
|
The current analog gain TLV seems to have completely incorrect values in
it. The gain starts at 0.5dB, proceeds in 1dB steps, and has no mute
value, correct the control to match.
Signed-off-by: Charles Keepax <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
ssh://gitolite.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs online fsck update from Darrick Wong:
New code for 6.6:
* Allow the kernel to initiate a freeze of a filesystem. The kernel
and userspace can both hold a freeze on a filesystem at the same
time; the freeze is not lifted until /both/ holders lift it. This
will enable us to fix a longstanding bug in XFS online fsck.
* Use kernel-initated fsfreeze to fix some longstanding false negatives
in online fsck of the free space and inode counters.
Signed-off-by: Darrick J. Wong <[email protected]>
Message-Id: <20230822182604.GB11286@frogsfrogsfrogs>
Signed-off-by: Christian Brauner <[email protected]>
|
|
ssh://gitolite.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull filesystem freezing updates from Darrick Wong:
New code for 6.6:
* Allow the kernel to initiate a freeze of a filesystem. The kernel
and userspace can both hold a freeze on a filesystem at the same
time; the freeze is not lifted until /both/ holders lift it. This
will enable us to fix a longstanding bug in XFS online fsck.
Signed-off-by: Darrick J. Wong <[email protected]>
Message-Id: <20230822182604.GB11286@frogsfrogsfrogs>
Signed-off-by: Christian Brauner <[email protected]>
|
|
When building for power4, newer binutils don't recognise the "dcbfl"
extended mnemonic.
dcbfl RA, RB is equivalent to dcbf RA, RB, 1.
Switch to "dcbf" to avoid the build error.
Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Add check for pf->vf not being NULL before dereferencing
pf->vf[vsi->vf_id] in updating VSI filter sync.
Add a similar check before dereferencing !pf->vf[vsi->vf_id].trusted
in the condition for clearing promisc mode bit.
Fixes: c87c938f62d8 ("i40e: Add VF VLAN pruning")
Signed-off-by: Andrii Staikov <[email protected]>
Signed-off-by: Aleksandr Loktionov <[email protected]>
Tested-by: Rafal Romanowski <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
When replacing an existing root qdisc, with one that is of the same kind, the
request boils down to essentially a parameterization change i.e not one that
requires allocation and grafting of a new qdisc. syzbot was able to create a
scenario which resulted in a taprio qdisc replacing an existing taprio qdisc
with a combination of NLM_F_CREATE, NLM_F_REPLACE and NLM_F_EXCL leading to
create and graft scenario.
The fix ensures that only when the qdisc kinds are different that we should
allow a create and graft, otherwise it goes into the "change" codepath.
While at it, fix the code and comments to improve readability.
While syzbot was able to create the issue, it did not zone on the root cause.
Analysis from Vladimir Oltean <[email protected]> helped narrow it down.
v1->V2 changes:
- remove "inline" function definition (Vladmir)
- remove extrenous braces in branches (Vladmir)
- change inline function names (Pedro)
- Run tdc tests (Victor)
v2->v3 changes:
- dont break else/if (Simon)
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: [email protected]
Closes: https://lore.kernel.org/netdev/20230816225759.g25x76kmgzya2gei@skbuf/T/
Tested-by: Vladimir Oltean <[email protected]>
Tested-by: Victor Nogueira <[email protected]>
Reviewed-by: Pedro Tammela <[email protected]>
Reviewed-by: Victor Nogueira <[email protected]>
Signed-off-by: Jamal Hadi Salim <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Back when set_fs() was a generic API for altering the address limit,
addr_limit_user_check() was a safety measure to prevent userspace being
able to issue syscalls with an unbound limit.
With the the removal of set_fs() as a generic API, the last user of
addr_limit_user_check() was removed in commit:
b5a5a01d8e9a44ec ("arm64: uaccess: remove addr_limit_user_check()")
... as since that commit, no architecture defines TIF_FSCHECK, and hence
addr_limit_user_check() always expands to nothing.
Remove addr_limit_user_check(), updating the comment in
exit_to_user_mode_prepare() to no longer refer to it. At the same time,
the comment is reworded to be a little more generic so as to cover
kmap_assert_nomap() in addition to lockdep_sys_exit().
No functional change.
Signed-off-by: Mark Rutland <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
If a signal callback releases the sw_sync fence, that will trigger a
deadlock as the timeline_fence_release recurses onto the fence->lock
(used both for signaling and the the timeline tree).
To avoid that, temporarily hold an extra reference to the signalled
fences until after we drop the lock.
(This is an alternative implementation of https://patchwork.kernel.org/patch/11664717/
which avoids some potential UAF issues with the original patch.)
v2: Remove now obsolete comment, use list_move_tail() and
list_del_init()
Reported-by: Bas Nieuwenhuizen <[email protected]>
Fixes: d3c6dd1fb30d ("dma-buf/sw_sync: Synchronize signal vs syncpt free")
Signed-off-by: Rob Clark <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Reviewed-by: Christian König <[email protected]>
Signed-off-by: Christian König <[email protected]>
|
|
variable *nplanes is provided by user via system call argument. The
possible value of q_data->fmt->num_planes is 1-3, while the value
of *nplanes can be 1-8. The array access by index i can cause array
out-of-bounds.
Fix this bug by checking *nplanes against the array size.
Fixes: 4e855a6efa54 ("[media] vcodec: mediatek: Add Mediatek V4L2 Video Encoder Driver")
Signed-off-by: Wei Chen <[email protected]>
Cc: [email protected]
Reviewed-by: Chen-Yu Tsai <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
|
|
The IGC_PTM_CTRL_SHRT_CYC defines the time between two consecutive PTM
requests. The bit resolution of this field is six bits. That bit five was
missing in the mask. This patch comes to correct the typo in the
IGC_PTM_CTRL_SHRT_CYC macro.
Fixes: a90ec8483732 ("igc: Add support for PTP getcrosststamp()")
Signed-off-by: Sasha Neftin <[email protected]>
Tested-by: Naama Meir <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Reviewed-by: Kalesh AP <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The automatic recalculation of the maximum allowed MTU is usually triggered
by code sections which are already rtnl lock protected by callers outside
of batman-adv. But when the fragmentation setting is changed via
batman-adv's own batadv genl family, then the rtnl lock is not yet taken.
But dev_set_mtu requires that the caller holds the rtnl lock because it
uses netdevice notifiers. And this code will then fail the check for this
lock:
RTNL: assertion failed at net/core/dev.c (1953)
Cc: [email protected]
Reported-by: [email protected]
Fixes: c6a953cce8d0 ("batman-adv: Trigger events for auto adjusted MTU")
Signed-off-by: Sven Eckelmann <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Link: https://lore.kernel.org/r/20230821-batadv-missing-mtu-rtnl-lock-v1-1-1c5a7bfe861e@narfation.org
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
If ptp_clock_register() fails or CONFIG_PTP isn't enabled, avoid starting
PTP related workqueues.
In this way we can fix this:
BUG: unable to handle page fault for address: ffffc9000440b6f8
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 100000067 P4D 100000067 PUD 1001e0067 PMD 107dc5067 PTE 0
Oops: 0000 [#1] PREEMPT SMP
[...]
Workqueue: events igb_ptp_overflow_check
RIP: 0010:igb_rd32+0x1f/0x60
[...]
Call Trace:
igb_ptp_read_82580+0x20/0x50
timecounter_read+0x15/0x60
igb_ptp_overflow_check+0x1a/0x50
process_one_work+0x1cb/0x3c0
worker_thread+0x53/0x3f0
? rescuer_thread+0x370/0x370
kthread+0x142/0x160
? kthread_associate_blkcg+0xc0/0xc0
ret_from_fork+0x1f/0x30
Fixes: 1f6e8178d685 ("igb: Prevent dropped Tx timestamps via work items and interrupts.")
Fixes: d339b1331616 ("igb: add PTP Hardware Clock code")
Signed-off-by: Alessio Igor Bogani <[email protected]>
Tested-by: Arpana Arland <[email protected]> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2023-08-21 (ice)
This series contains updates to ice driver only.
Jesse fixes an issue on calculating buffer size.
Petr Oros reverts a commit that does not fully resolve VF reset issues
and implements one that provides a fuller fix.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
ice: Fix NULL pointer deref during VF reset
Revert "ice: Fix ice VF reset during iavf initialization"
ice: fix receive buffer size miscalculation
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Oliver Hartkopp says:
====================
CAN fixes for 6.5-rc7
The isotp fix removes an unnecessary check which leads to delays and/or
a wrong error notification.
The fix for the CAN_RAW socket solves the last issue that has been
introduced with commit ee8b94c8510c ("can: raw: fix receiver memory leak")
in this upstream cycle (detected by Eric Dumazet).
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Commit ee8b94c8510c ("can: raw: fix receiver memory leak") introduced
a new reference to the CAN netdevice that has assigned CAN filters.
But this new ro->dev reference did not maintain its own refcount which
lead to another KASAN use-after-free splat found by Eric Dumazet.
This patch ensures a proper refcount for the CAN nedevice.
Fixes: ee8b94c8510c ("can: raw: fix receiver memory leak")
Reported-by: Eric Dumazet <[email protected]>
Cc: Ziyang Xuan <[email protected]>
Signed-off-by: Oliver Hartkopp <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The original implementation had a very simple handling for single frame
transmissions as it just sent the single frame without a timeout handling.
With the new echo frame handling the echo frame was also introduced for
single frames but the former exception ('simple without timers') has been
maintained by accident. This leads to a 1 second timeout when closing the
socket and to an -ECOMM error when CAN_ISOTP_WAIT_TX_DONE is selected.
As the echo handling is always active (also for single frames) remove the
wrong extra condition for single frames.
Fixes: 9f39d36530e5 ("can: isotp: add support for transmission without flow control")
Signed-off-by: Oliver Hartkopp <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
While injecting PCIe errors to the upstream PCIe switch of
a BCM57810 NIC, system hangs/crashes were observed.
After several calls to bnx2x_tx_timout() complete,
bnx2x_nic_unload() is called to free up HW resources
and bnx2x_napi_disable() is called to release NAPI objects.
Later, when the EEH driver calls bnx2x_io_slot_reset() to
complete the recovery process, bnx2x attempts to disable
NAPI again by calling bnx2x_napi_disable() and freeing
resources which have already been freed, resulting in a
hang or crash.
Introduce a new flag to track the HW resource and NAPI
allocation state, refactor duplicated code into a single
function, check page pool allocation status before freeing,
and reduces debug output when a TX timeout event occurs.
Reviewed-by: Manish Chopra <[email protected]>
Tested-by: Abdul Haleem <[email protected]>
Tested-by: David Christensen <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Tested-by: Venkata Sai Duggi <[email protected]>
Signed-off-by: Thinh Tran <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Problem can be reproduced by unloading snd_soc_simple_card, because in
devm_get_clk_from_child() devres data is allocated as `struct clk`, but
devm_clk_release() expects devres data to be `struct devm_clk_state`.
KASAN report:
==================================================================
BUG: KASAN: slab-out-of-bounds in devm_clk_release+0x20/0x54
Read of size 8 at addr ffffff800ee09688 by task (udev-worker)/287
Call trace:
dump_backtrace+0xe8/0x11c
show_stack+0x1c/0x30
dump_stack_lvl+0x60/0x78
print_report+0x150/0x450
kasan_report+0xa8/0xf0
__asan_load8+0x78/0xa0
devm_clk_release+0x20/0x54
release_nodes+0x84/0x120
devres_release_all+0x144/0x210
device_unbind_cleanup+0x1c/0xac
really_probe+0x2f0/0x5b0
__driver_probe_device+0xc0/0x1f0
driver_probe_device+0x68/0x120
__driver_attach+0x140/0x294
bus_for_each_dev+0xec/0x160
driver_attach+0x38/0x44
bus_add_driver+0x24c/0x300
driver_register+0xf0/0x210
__platform_driver_register+0x48/0x54
asoc_simple_card_init+0x24/0x1000 [snd_soc_simple_card]
do_one_initcall+0xac/0x340
do_init_module+0xd0/0x300
load_module+0x2ba4/0x3100
__do_sys_init_module+0x2c8/0x300
__arm64_sys_init_module+0x48/0x5c
invoke_syscall+0x64/0x190
el0_svc_common.constprop.0+0x124/0x154
do_el0_svc+0x44/0xdc
el0_svc+0x14/0x50
el0t_64_sync_handler+0xec/0x11c
el0t_64_sync+0x14c/0x150
Allocated by task 287:
kasan_save_stack+0x38/0x60
kasan_set_track+0x28/0x40
kasan_save_alloc_info+0x20/0x30
__kasan_kmalloc+0xac/0xb0
__kmalloc_node_track_caller+0x6c/0x1c4
__devres_alloc_node+0x44/0xb4
devm_get_clk_from_child+0x44/0xa0
asoc_simple_parse_clk+0x1b8/0x1dc [snd_soc_simple_card_utils]
simple_parse_node.isra.0+0x1ec/0x230 [snd_soc_simple_card]
simple_dai_link_of+0x1bc/0x334 [snd_soc_simple_card]
__simple_for_each_link+0x2ec/0x320 [snd_soc_simple_card]
asoc_simple_probe+0x468/0x4dc [snd_soc_simple_card]
platform_probe+0x90/0xf0
really_probe+0x118/0x5b0
__driver_probe_device+0xc0/0x1f0
driver_probe_device+0x68/0x120
__driver_attach+0x140/0x294
bus_for_each_dev+0xec/0x160
driver_attach+0x38/0x44
bus_add_driver+0x24c/0x300
driver_register+0xf0/0x210
__platform_driver_register+0x48/0x54
asoc_simple_card_init+0x24/0x1000 [snd_soc_simple_card]
do_one_initcall+0xac/0x340
do_init_module+0xd0/0x300
load_module+0x2ba4/0x3100
__do_sys_init_module+0x2c8/0x300
__arm64_sys_init_module+0x48/0x5c
invoke_syscall+0x64/0x190
el0_svc_common.constprop.0+0x124/0x154
do_el0_svc+0x44/0xdc
el0_svc+0x14/0x50
el0t_64_sync_handler+0xec/0x11c
el0t_64_sync+0x14c/0x150
The buggy address belongs to the object at ffffff800ee09600
which belongs to the cache kmalloc-256 of size 256
The buggy address is located 136 bytes inside of
256-byte region [ffffff800ee09600, ffffff800ee09700)
The buggy address belongs to the physical page:
page:000000002d97303b refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x4ee08
head:000000002d97303b order:1 compound_mapcount:0 compound_pincount:0
flags: 0x10200(slab|head|zone=0)
raw: 0000000000010200 0000000000000000 dead000000000122 ffffff8002c02480
raw: 0000000000000000 0000000080100010 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffffff800ee09580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffffff800ee09600: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffffff800ee09680: 00 fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
^
ffffff800ee09700: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffffff800ee09780: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
==================================================================
Fixes: abae8e57e49a ("clk: generalize devm_clk_get() a bit")
Signed-off-by: Andrey Skvortsov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Stephen Boyd <[email protected]>
|
|
Fix Sphinx warning about unexpected indent.
Signed-off-by: Jani Nikula <[email protected]>
Reviewed-by: Luca Coelho <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit 175b036472f678948b03baabce4a008b7ba91ce7)
Signed-off-by: Rodrigo Vivi <[email protected]>
|
|
VLENB is critical for callers of ptrace to reconstruct Vector register
files from the register dump of NT_RISCV_VECTOR. Also, future systems
may will have a writable VLENB, so add it now to potentially save future
compatibility issue.
Fixes: 0c59922c769a ("riscv: Add ptrace vector support")
Signed-off-by: Andy Chiu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Palmer Dabbelt <[email protected]>
|
|
We've found two bugs here: NT_RISCV_VECTOR steps on NT_RISCV_CSR (which
is only for embedded), and we don't have vlenb in the core dumps. Given
that we've have a pair of bugs croup up as part of the GDB review we've
probably got other issues, so let's just cut this for 6.5 and get it
right.
Fixes: 0c59922c769a ("riscv: Add ptrace vector support")
Reviewed-by: Maciej W. Rozycki <[email protected]>
Signed-off-by: Andy Chiu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Palmer Dabbelt <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Fix DT node refcount when creating platform devices
- Fix deadlock in changeset code due to printing with devtree_lock held
- Fix unittest EXPECT strings for parse_phandle_with_args_map() test
- Fix IMA kexec memblock freeing
* tag 'devicetree-fixes-for-6.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
of/platform: increase refcount of fwnode
of: dynamic: Refactor action prints to not use "%pOF" inside devtree_lock
of: unittest: Fix EXPECT for parse_phandle_with_args_map() test
mm,ima,kexec,of: use memblock_free_late from ima_free_kexec_buffer
|
|
Cited commits passed a size to alloc_skb that was only big enough for
the actual packet contents, but the following skb_put + memcpy writes
the whole struct efx_loopback_payload including leading and trailing
padding bytes (which are then stripped off with skb_pull/skb_trim).
This could cause an skb_over_panic, although in practice we get saved
by kmalloc_size_roundup.
Pass the entire size we use, instead of the size of the final packet.
Reported-by: Andy Moreton <[email protected]>
Fixes: cf60ed469629 ("sfc: use padding to fix alignment in loopback test")
Fixes: 30c24dd87f3f ("sfc: siena: use padding to fix alignment in loopback test")
Fixes: 1186c6b31ee1 ("sfc: falcon: use padding to fix alignment in loopback test")
Signed-off-by: Edward Cree <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
Two fixes:
- reorder buffer filter checks can cause bad shift/UBSAN
warning with newer HW, avoid the check (mac80211)
- add Kconfig dependency for iwlwifi for PTP clock usage
* tag 'wireless-2023-08-22' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: mac80211: limit reorder_buf_filtered to avoid UBSAN warning
wifi: iwlwifi: mvm: add dependency for PTP clock
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Commit b655892ffd6d ("leds: trigger: netdev: expose hw_control status
via sysfs") exposed to sysfs the flag that tells whether the LED trigger
is offloaded to hardware, under the name "hw_control", since that is the
name under which this setting is called in the code.
Everywhere else in kernel when some work that is normally done in
software can be made to be done by hardware instead, we use the word
"offloading" to describe this, e.g. "LED blinking is offloaded to
hardware".
Normally renaming sysfs entries is a no-go because of backwards
compatibility. But since this patch was not yet released in a stable
kernel, I think it is still possible to rename it, if there is
consensus.
Fixes: b655892ffd6d ("leds: trigger: netdev: expose hw_control status via sysfs")
Signed-off-by: Marek Behún <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
When a hardware reset is triggered on devices not initializing WED the
calls to mtk_wed_fe_reset and mtk_wed_fe_reset_complete dereference a
pointer on uninitialized stack memory.
Break out of both functions in case a hw_list entry is 0.
Fixes: 08a764a7c51b ("net: ethernet: mtk_wed: add reset/reset_complete callbacks")
Signed-off-by: Daniel Golle <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Acked-by: Lorenzo Bianconi <[email protected]>
Link: https://lore.kernel.org/r/5465c1609b464cc7407ae1530c40821dcdf9d3e6.1692634266.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Pull NFS client fixes from Trond Myklebust:
- fix a use after free in nfs_direct_join_group() (Cc: stable)
- fix sysfs server name memory leak
- fix lock recovery hang in NFSv4.0
- fix page free in the error path for nfs42_proc_getxattr() and
__nfs4_get_acl_uncached()
- SUNRPC/rdma: fix receive buffer dma-mapping after a server disconnect
* tag 'nfs-for-6.5-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
xprtrdma: Remap Receive buffers after a reconnect
NFSv4: fix out path in __nfs4_get_acl_uncached
NFSv4.2: fix error handling in nfs42_proc_getxattr
NFS: Fix sysfs server name memory leak
NFS: Fix a use after free in nfs_direct_join_group()
NFSv4: Fix dropped lock for racing OPEN and delegation return
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux fix from Paul Moore:
"A small fix for a potential problem when cleaning up after a failed
SELinux policy load (list next pointer not being properly initialized
to NULL early enough)"
* tag 'selinux-pr-20230821' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: set next pointer before attaching to list
|
|
System wide suspend already has support for lmem save/restore during
suspend therefore enabling d3cold for s2idle and keepng it disable for
runtime PM.(Refer below commit for d3cold runtime PM disable justification)
'commit 66eb93e71a7a ("drm/i915/dgfx: Keep PCI autosuspend control
'on' by default on all dGPU")'
It will reduce the DG2 Card power consumption to ~0 Watt
for s2idle power KPI.
v2:
- Added "Cc: [email protected]".
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8755
Cc: [email protected]
Cc: Rodrigo Vivi <[email protected]>
Signed-off-by: Anshuman Gupta <[email protected]>
Reviewed-by: Rodrigo Vivi <[email protected]>
Tested-by: Aaron Ma <[email protected]>
Tested-by: Jianshui Yu <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit 2643e6d1f2a5e51877be24042d53cf956589be10)
Signed-off-by: Rodrigo Vivi <[email protected]>
|
|
A compiler may see the collision with the toupper() defined in ctype.h:
fs/affs/namei.c:159:19: warning: unused variable 'toupper' [-Wunused-variable]
159 | toupper_t toupper = affs_get_toupper(sb);
To prevent this from happening, rename toupper local variable to fn.
Initially this had been introduced by 24579a881513 ("v2.4.3.5 -> v2.4.3.6")
in the history.git by history group.
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Andy Shevchenko <[email protected]>
Reviewed-by: David Sterba <[email protected]>
Signed-off-by: David Sterba <[email protected]>
|
|
If the filesystem implements migrate_folio and writepages, there is
no need for a writepage implementation.
Signed-off-by: Matthew Wilcox (Oracle) <[email protected]>
Reviewed-by: David Sterba <[email protected]>
Signed-off-by: David Sterba <[email protected]>
|
|
When doing a relocation, there is a chance that at the time of
btrfs_reloc_clone_csums(), there is no checksum for the corresponding
region.
In this case, btrfs_finish_ordered_zoned()'s sum points to an invalid item
and so ordered_extent's logical is set to some invalid value. Then,
btrfs_lookup_block_group() in btrfs_zone_finish_endio() failed to find a
block group and will hit an assert or a null pointer dereference as
following.
This can be reprodcued by running btrfs/028 several times (e.g, 4 to 16
times) with a null_blk setup. The device's zone size and capacity is set to
32 MB and the storage size is set to 5 GB on my setup.
KASAN: null-ptr-deref in range [0x0000000000000088-0x000000000000008f]
CPU: 6 PID: 3105720 Comm: kworker/u16:13 Tainted: G W 6.5.0-rc6-kts+ #1
Hardware name: Supermicro Super Server/X10SRL-F, BIOS 2.0 12/17/2015
Workqueue: btrfs-endio-write btrfs_work_helper [btrfs]
RIP: 0010:btrfs_zone_finish_endio.part.0+0x34/0x160 [btrfs]
Code: 41 54 49 89 fc 55 48 89 f5 53 e8 57 7d fc ff 48 8d b8 88 00 00 00 48 89 c3 48 b8 00 00 00 00 00
> 3c 02 00 0f 85 02 01 00 00 f6 83 88 00 00 00 01 0f 84 a8 00 00
RSP: 0018:ffff88833cf87b08 EFLAGS: 00010206
RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000000011 RSI: 0000000000000004 RDI: 0000000000000088
RBP: 0000000000000002 R08: 0000000000000001 R09: ffffed102877b827
R10: ffff888143bdc13b R11: ffff888125b1cbc0 R12: ffff888143bdc000
R13: 0000000000007000 R14: ffff888125b1cba8 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff88881e500000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f3ed85223d5 CR3: 00000001519b4005 CR4: 00000000001706e0
Call Trace:
<TASK>
? die_addr+0x3c/0xa0
? exc_general_protection+0x148/0x220
? asm_exc_general_protection+0x22/0x30
? btrfs_zone_finish_endio.part.0+0x34/0x160 [btrfs]
? btrfs_zone_finish_endio.part.0+0x19/0x160 [btrfs]
btrfs_finish_one_ordered+0x7b8/0x1de0 [btrfs]
? rcu_is_watching+0x11/0xb0
? lock_release+0x47a/0x620
? btrfs_finish_ordered_zoned+0x59b/0x800 [btrfs]
? __pfx_btrfs_finish_one_ordered+0x10/0x10 [btrfs]
? btrfs_finish_ordered_zoned+0x358/0x800 [btrfs]
? __smp_call_single_queue+0x124/0x350
? rcu_is_watching+0x11/0xb0
btrfs_work_helper+0x19f/0xc60 [btrfs]
? __pfx_try_to_wake_up+0x10/0x10
? _raw_spin_unlock_irq+0x24/0x50
? rcu_is_watching+0x11/0xb0
process_one_work+0x8c1/0x1430
? __pfx_lock_acquire+0x10/0x10
? __pfx_process_one_work+0x10/0x10
? __pfx_do_raw_spin_lock+0x10/0x10
? _raw_spin_lock_irq+0x52/0x60
worker_thread+0x100/0x12c0
? __kthread_parkme+0xc1/0x1f0
? __pfx_worker_thread+0x10/0x10
kthread+0x2ea/0x3c0
? __pfx_kthread+0x10/0x10
ret_from_fork+0x30/0x70
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1b/0x30
</TASK>
On the zoned mode, writing to pre-allocated region means data relocation
write. Such write always uses WRITE command so there is no need of splitting
and rewriting logical address. Thus, we can just skip the function for the
case.
Fixes: cbfce4c7fbde ("btrfs: optimize the logical to physical mapping for zoned writes")
Signed-off-by: Naohiro Aota <[email protected]>
Signed-off-by: David Sterba <[email protected]>
|
|
It's not necessary to use low-level locking helpers here. Use the
higher-level locking helpers and log if the superblock is dying. Since
the caller is assumed to already hold an active reference it isn't
possible to observe a dying superblock.
Suggested-by: Jan Kara <[email protected]>
Signed-off-by: Christian Brauner <[email protected]>
|
|
It is particularly important for the userns mount case (when a sensible
nr_inodes maximum may not be enforced) that tmpfs user xattrs be subject
to memory cgroup limiting. Leave temporary buffer allocations as is,
but change the persistent simple xattr allocations from GFP_KERNEL to
GFP_KERNEL_ACCOUNT. This limits kernfs's cgroupfs too, but that's good.
(I had intended to send this change earlier, but had been confused by
shmem_alloc_inode() using GFP_KERNEL, and thought a discussion would be
needed to change that too: no, I was forgetting the SLAB_ACCOUNT on that
kmem_cache, which implicitly adds __GFP_ACCOUNT to all its allocations.)
Signed-off-by: Hugh Dickins <[email protected]>
Reviewed-by: Jan Kara <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Christian Brauner <[email protected]>
|
|
Some cosmetic changes as well as a missing __init annotation.
Signed-off-by: Ard Biesheuvel <[email protected]>
|
|
Instead of bypassing the kernel's adaptation layer for performing EFI
runtime calls, wire up ACPI PRM handling into it. This means these calls
can no longer occur concurrently with EFI runtime calls, and will be
made from the EFI runtime workqueue. It also means any page faults
occurring during PRM handling will be identified correctly as
originating in firmware code.
Acked-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Ard Biesheuvel <[email protected]>
|
|
Avoid duplicating the EFI arch setup and teardown routine calls numerous
times in efi_call_rts(). Instead, expand the efi_call_virt_pointer()
macro into efi_call_rts(), taking the pre and post parts out of the
switch.
Signed-off-by: Ard Biesheuvel <[email protected]>
|
|
__efi_call_virt() exists as an alternative for efi_call_virt() for the
sole reason that ResetSystem() returns void, and so we cannot use a call
to it in the RHS of an assignment.
Given that there is only a single user, let's drop the macro, and expand
it into the caller. That way, the remaining macro can be tightened
somewhat in terms of type safety too.
Note that the use of typeof() on the runtime service invocation does not
result in an actual call being made, but it does require a few pointer
types to be fixed up and converted into the proper function pointer
prototypes.
Signed-off-by: Ard Biesheuvel <[email protected]>
|
|
DP DSC Receiver Capabilities are exposed via DPCD 60h-6Fh.
Fix the DSC RECEIVER CAP SIZE accordingly.
Fixes: ffddc4363c28 ("drm/dp: Add DP DSC DPCD receiver capability size define and missing SHIFT")
Cc: Anusha Srivatsa <[email protected]>
Cc: Manasi Navare <[email protected]>
Cc: <[email protected]> # v5.0+
Signed-off-by: Ankit Nautiyal <[email protected]>
Reviewed-by: Stanislav Lisovskiy <[email protected]>
Signed-off-by: Jani Nikula <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
The tg3 driver will use kmalloc() under some conditions. Check the
frag_size and use slab_build_skb() when frag_size is 0. Silences
the warning introduced by commit ce098da1497c ("skbuff: Introduce
slab_build_skb()"):
Use slab_build_skb() instead
...
tg3_poll_work+0x638/0xf90 [tg3]
Fixes: ce098da1497c ("skbuff: Introduce slab_build_skb()")
Reported-by: Fiona Ebner <[email protected]>
Closes: https://lore.kernel.org/all/[email protected]
Cc: Siva Reddy Kallam <[email protected]>
Cc: Prashant Sreedharan <[email protected]>
Cc: Michael Chan <[email protected]>
Cc: Bagas Sanjaya <[email protected]>
Signed-off-by: Kees Cook <[email protected]>
Reviewed-by: Pavan Chebbi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Before adding a port to bond, it need to be set down first. In the
lacpdu test the author set the port down specifically. But commit
a4abfa627c38 ("net: rtnetlink: Enslave device before bringing it up")
changed the operation order, the kernel will set the port down _after_
adding to bond. So all the ports will be down at last and the test failed.
In fact, the veth interfaces are already inactive when added. This
means there's no need to set them down again before adding to the bond.
Let's just remove the link down operation.
Fixes: a4abfa627c38 ("net: rtnetlink: Enslave device before bringing it up")
Reported-by: Zhengchao Shao <[email protected]>
Closes: https://lore.kernel.org/netdev/[email protected]/
Signed-off-by: Hangbin Liu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
When cross-building the arm64 kernel with allmodconfig using GCC 9.4,
the following error occurs on multiple files under samples/ftrace/:
/tmp/ccPC1ODs.s: Assembler messages:
/tmp/ccPC1ODs.s:8: Error: selected processor does not support `bti c'
Fix this issue by replacing `bti c` with `hint 34`, which is compatible
for the older compiler.
Link: https://lore.kernel.org/linux-trace-kernel/[email protected]
Cc: Masami Hiramatsu <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Florent Revest <[email protected]>
Fixes: 8c3526fb86060cb5 ("arm64: ftrace: Add direct call trampoline samples support")
Acked-by: Mark Rutland <[email protected]>
Signed-off-by: GONG, Ruiqi <[email protected]>
Signed-off-by: Steven Rostedt (Google) <[email protected]>
|
|
The qunipro_g4_sel clear is also needed for new platforms with major
version > 5. Fix the version check to take this into account.
Fixes: 9c02aa24bf40 ("scsi: ufs: ufs-qcom: Clear qunipro_g4_sel for HW version major 5")
Acked-by: Manivannan Sadhasivam <[email protected]>
Reviewed-by: Nitin Rawat <[email protected]>
Signed-off-by: Neil Armstrong <[email protected]>
Link: https://lore.kernel.org/r/20230821-topic-sm8x50-upstream-ufs-major-5-plus-v2-1-f42a4b712e58@linaro.org
Reviewed-by: "Bao D. Nguyen" <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
The search and wrap around logic in the ufshcd_mcq_sqe_search() function
does not work correctly when the hwq's queue depth is not a power of two
number. Correct it so that any queue depth with a positive integer value
within the supported range would work.
Signed-off-by: "Bao D. Nguyen" <[email protected]>
Link: https://lore.kernel.org/r/ff49c15be205135ed3ec186f3086694c02867dbd.1692149603.git.quic_nguyenb@quicinc.com
Reviewed-by: Bart Van Assche <[email protected]>
Fixes: 8d7290348992 ("scsi: ufs: mcq: Add supporting functions for MCQ abort")
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
commit 0f8e5651095b
("of/platform: Propagate firmware node by calling device_set_node()")
use of_fwnode_handle to replace of_node_get, which introduces a side
effect that the refcount is not increased. Then the out of tree
jailhouse hypervisor enable/disable test will trigger kernel dump in
of_overlay_remove, with the following sequence
"
of_changeset_revert(&overlay_changeset);
of_changeset_destroy(&overlay_changeset);
of_overlay_remove(&overlay_id);
"
So increase the refcount to avoid issues.
This patch also release the refcount when releasing amba device to avoid
refcount leakage.
Fixes: 0f8e5651095b ("of/platform: Propagate firmware node by calling device_set_node()")
Reviewed-by: Andy Shevchenko <[email protected]>
Signed-off-by: Peng Fan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring <[email protected]>
|
|
When a memcg is in the process of being released mem_cgroup_tryget will
fail because its reference count has already reached 0. This can happen
during reclaim if the memcg has already been offlined, and we reclaim all
remaining pages attributed to the offlined memcg. shrink_many attempts to
skip the empty memcg in this case, and continue reclaiming from the
remaining memcgs in the old generation. If there is only one memcg
remaining, or if all remaining memcgs are in the process of being released
then shrink_many will spin until all memcgs have finished being released.
The release occurs through a workqueue, so it can take a while before
kswapd is able to make any further progress.
This fix results in reductions in kswapd activity and direct reclaim in
a test where 28 apps (working set size > total memory) are repeatedly
launched in a random sequence:
A B delta ratio(%)
allocstall_movable 5962 3539 -2423 -40.64
allocstall_normal 2661 2417 -244 -9.17
kswapd_high_wmark_hit_quickly 53152 7594 -45558 -85.71
pageoutrun 57365 11750 -45615 -79.52
Link: https://lkml.kernel.org/r/[email protected]
Fixes: e4dde56cd208 ("mm: multi-gen LRU: per-node lru_gen_folio lists")
Signed-off-by: T.J. Mercier <[email protected]>
Acked-by: Yu Zhao <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
When page_handle_poison() fails to handle the hugepage or free page in
retry path, soft_offline_page() will return 0 while -EBUSY is expected in
this case.
Consequently the user will think soft_offline_page succeeds while it in
fact failed. So the user will not try again later in this case.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: b94e02822deb ("mm,hwpoison: try to narrow window race for free pages")
Signed-off-by: Miaohe Lin <[email protected]>
Acked-by: Naoya Horiguchi <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|