aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2014-02-14ALSA: usb-audio: Use SNDRV_DEV_CODEC for mixer objectsTakashi Iwai1-1/+1
Instead of SNDRV_DEV_LOWLEVEL, use SNDRV_DEV_CODEC type for mixer objects so that they are managed in a proper release order. No functional change at this point. Signed-off-by: Takashi Iwai <[email protected]>
2014-02-14ALSA: seq_oss: Use standard printk helpersTakashi Iwai5-18/+18
Use the standard pr_xxx() helpers instead of home-baked snd_print*(). Signed-off-by: Takashi Iwai <[email protected]>
2014-02-14ALSA: seq: Use standard printk helpersTakashi Iwai13-47/+47
Use the standard pr_xxx() helpers instead of home-baked snd_print*(). Signed-off-by: Takashi Iwai <[email protected]>
2014-02-14ALSA: timer: Use standard printk helpersTakashi Iwai3-11/+8
Use the standard pr_xxx() helpers instead of home-baked snd_print*(). Signed-off-by: Takashi Iwai <[email protected]>
2014-02-14ALSA: oss: Use standard printk helpersTakashi Iwai2-56/+55
Use dev_err() & co as much as possible. If not available (no device assigned at the calling point), use pr_xxx() helpers instead. Signed-off-by: Takashi Iwai <[email protected]>
2014-02-14ALSA: hwdep: Use standard printk helpersTakashi Iwai1-8/+12
Use dev_err() & co as much as possible. If not available (no device assigned at the calling point), use pr_xxx() helpers instead. Signed-off-by: Takashi Iwai <[email protected]>
2014-02-14ALSA: rawmidi: Use standard printk helpersTakashi Iwai1-15/+34
Use dev_err() & co as much as possible. If not available (no device assigned at the calling point), use pr_xxx() helpers instead. Signed-off-by: Takashi Iwai <[email protected]>
2014-02-14ALSA: core: Use standard printk helpersTakashi Iwai8-32/+38
Use dev_err() & co as much as possible. If not available (no device assigned at the calling point), use pr_xxx() helpers instead. Signed-off-by: Takashi Iwai <[email protected]>
2014-02-14ALSA: pcm: Use standard printk helpersTakashi Iwai5-43/+55
Use dev_err() & co as much as possible. If not available (no device assigned at the calling point), use pr_xxx() helpers instead. For simplicity, introduce new helpers for pcm stream, pcm_err(), etc. Signed-off-by: Takashi Iwai <[email protected]>
2014-02-14ALSA: control: Use standard printk helpersTakashi Iwai2-9/+8
Use dev_err() & co as much as possible. If not available (no device assigned at the calling point), use pr_xxx() helpers instead. Signed-off-by: Takashi Iwai <[email protected]>
2014-02-14ALSA: seq_oss: Drop debug printsTakashi Iwai7-68/+0
The debug prints in snd-seq-oss module are rather useless. Let's clean up before further modifications. Signed-off-by: Takashi Iwai <[email protected]>
2014-02-14ALSA: Use standard device refcount for card accountingTakashi Iwai4-44/+20
Drop the own refcount but use the standard device refcounting via get_device() and put_device(). Introduce a new completion to snd_card instead of the wait queue for syncing the last release, which is used in snd_card_free(). Signed-off-by: Takashi Iwai <[email protected]>
2014-02-14ALSA: Use static groups for id and number card sysfs attr filesTakashi Iwai1-13/+19
... instead of calling device_create_file() manually. No functional change. Signed-off-by: Takashi Iwai <[email protected]>
2014-02-14ALSA: Embed card device into struct snd_cardTakashi Iwai2-23/+41
As prepared in the previous patch, we are ready to create a device struct for the card object in snd_card_create() now. This patch changes the scheme from the old style to: - embed a device struct for the card object into snd_card struct, - initialize the card device in snd_card_create() (but not register), - registration is done in snd_card_register() via device_add() The actual card device is stored in card->card_dev. The card->dev pointer is kept unchanged and pointing to the parent device as before for compatibility reason. Signed-off-by: Takashi Iwai <[email protected]>
2014-02-14usb: gadget: Convert to snd_card_new() with a device pointerTakashi Iwai2-7/+4
Also remove superfluous snd_card_set_dev() calls. Signed-off-by: Takashi Iwai <[email protected]>
2014-02-14staging/media: Convert to snd_card_new() with a device pointerTakashi Iwai2-6/+5
Also remove superfluous snd_card_set_dev() calls. Signed-off-by: Takashi Iwai <[email protected]>
2014-02-14staging/line6: Convert to snd_card_new() with a device pointerTakashi Iwai3-6/+3
Also remove superfluous snd_card_set_dev() calls. Signed-off-by: Takashi Iwai <[email protected]>
2014-02-14thinkpad_acpi: Convert to snd_card_new() with a device pointerTakashi Iwai1-3/+3
Also remove superfluous snd_card_set_dev() calls. Signed-off-by: Takashi Iwai <[email protected]>
2014-02-14[media] Convert to snd_card_new() with a device pointerTakashi Iwai11-36/+29
Also remove superfluous snd_card_set_dev() calls. Signed-off-by: Takashi Iwai <[email protected]>
2014-02-14HID: prodikeys: Convert to snd_card_new() with a device pointerTakashi Iwai1-3/+2
Also remove superfluous snd_card_set_dev() calls. Signed-off-by: Takashi Iwai <[email protected]>
2014-02-14ASoC: core: Convert to snd_card_new() with a device pointerTakashi Iwai1-2/+1
Also remove superfluous card->dev assignment. Reviewed-by: Mark Brown <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2014-02-14ALSA: spi: Convert to snd_card_new() with a device pointerTakashi Iwai1-4/+2
Also remove superfluous snd_card_set_dev() calls. Signed-off-by: Takashi Iwai <[email protected]>
2014-02-14ALSA: sparc: Convert to snd_card_new() with a device pointerTakashi Iwai3-9/+10
Also remove superfluous snd_card_set_dev() calls. Signed-off-by: Takashi Iwai <[email protected]>
2014-02-14ALSA: sh: Convert to snd_card_new() with a device pointerTakashi Iwai2-4/+3
Also remove superfluous snd_card_set_dev() calls. Signed-off-by: Takashi Iwai <[email protected]>
2014-02-14ALSA: ppc: Convert to snd_card_new() with a device pointerTakashi Iwai3-8/+5
Also remove superfluous snd_card_set_dev() calls. Signed-off-by: Takashi Iwai <[email protected]>
2014-02-14ALSA: pcmcia: Convert to snd_card_new() with a device pointerTakashi Iwai2-5/+4
Also remove superfluous snd_card_set_dev() calls. Signed-off-by: Takashi Iwai <[email protected]>
2014-02-14ALSA: parisc: Convert to snd_card_new() with a device pointerTakashi Iwai1-3/+1
Also remove superfluous snd_card_set_dev() calls. Signed-off-by: Takashi Iwai <[email protected]>
2014-02-14ALSA: mips: Convert to snd_card_new() with a device pointerTakashi Iwai3-6/+4
Also remove superfluous snd_card_set_dev() calls. Signed-off-by: Takashi Iwai <[email protected]>
2014-02-14ALSA: au1x00: convert to platform deviceManuel Lauss1-98/+141
Make sound/mips/au1x00.c a proper platform_driver. [minor coding style fixes, cleanup and forward-ported by tiwai] Cc: Charles Eidsness <[email protected]> Signed-off-by: Manuel Lauss <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2014-02-14ALSA: atmel: Convert to snd_card_new() with a device pointerTakashi Iwai2-16/+7
Also remove superfluous snd_card_set_dev() calls. Signed-off-by: Takashi Iwai <[email protected]>
2014-02-14ALSA: arm: Convert to snd_card_new() with a device pointerTakashi Iwai2-8/+4
Also remove superfluous snd_card_set_dev() calls. Signed-off-by: Takashi Iwai <[email protected]>
2014-02-14ALSA: firewire: Convert to snd_card_new() with a device pointerTakashi Iwai4-8/+8
Also remove superfluous snd_card_set_dev() calls. Reviewed-by: Takashi Sakamoto <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2014-02-13IB/mlx5: Remove dependency on X86Eli Cohen2-2/+2
Remove Kconfig dependency of mlx5_ib/mlx5_core on X86, since there is no such dependency in reality. Signed-off-by: Eli Cohen <[email protected]> Signed-off-by: Michael Neuling <[email protected]> Signed-off-by: Roland Dreier <[email protected]>
2014-02-13mlx5: Add include of <linux/slab.h> because of kzalloc()/kfree() useRoland Dreier1-0/+2
On some architectures (for example, arm), we don't end up indirectly pulling in the declaration of kzalloc() and kfree(), and so building anything that includes <linux/mlx5/driver.h> breaks. Fix this by adding an explicit include to get the declaration. Reported-by: kbuild test robot <[email protected]> Signed-off-by: Roland Dreier <[email protected]>
2014-02-13hwmon: (ntc_thermistor) Avoid math overflowDoug Anderson1-3/+3
The ntc thermistor code was doing math whose temporary result might have overflowed 32-bits. We need some casts in there to make it safe. In one example I found: - pullup_uV: 1800000 - result of iio_read_channel_raw: 3226 - 1800000 * 3226 => 0x15a1cbc80 Signed-off-by: Doug Anderson <[email protected]> Cc: [email protected] # 3.10+ Signed-off-by: Guenter Roeck <[email protected]>
2014-02-13IB/qib: Add missing serdes init sequenceMike Marciniszyn1-0/+5
Research has shown that commit a77fcf895046 ("IB/qib: Use a single txselect module parameter for serdes tuning") missed a key serdes init sequence. This patch add that sequence. Cc: <[email protected]> Reviewed-by: Dennis Dalessandro <[email protected]> Signed-off-by: Mike Marciniszyn <[email protected]> Signed-off-by: Roland Dreier <[email protected]>
2014-02-13RDMA/cxgb4: Add missing neigh_release in LE-Workaround pathKumar Sanghvi1-0/+1
Signed-off-by: Kumar Sanghvi <[email protected]> Signed-off-by: Hariprasad Shenai <[email protected]> Signed-off-by: Roland Dreier <[email protected]>
2014-02-13IB: Report using RoCE IP based gids in port capsMoni Shoua3-3/+4
For userspace RoCE UD QPs we need to know the GID format that the kernel uses, e.g when working over older kernels. For that end, add a new port capability IB_PORT_IP_BASED_GIDS and report it when query port is issued. Signed-off-by: Moni Shoua <[email protected]> Signed-off-by: Matan Barak <[email protected]> Signed-off-by: Or Gerlitz <[email protected]> Signed-off-by: Roland Dreier <[email protected]>
2014-02-13IB/mlx4: Build the port IBoE GID table properly under bondingMoni Shoua1-4/+37
When scanning netdevices we need to check a few more conditions and cases to build the IBoE GID table properly. For example, under bonding we must make sure that when a port is down, the bond IP address isn't programmed as a GID, since doing so will cause failure with IB core flows that selects ports by GID. Signed-off-by: Moni Shoua <[email protected]> Signed-off-by: Or Gerlitz <[email protected]> Signed-off-by: Roland Dreier <[email protected]>
2014-02-13IB/mlx4: Do IBoE GID table resets per-portMoni Shoua1-17/+18
The IBoE code used to reset the GID table did it for all Ethernet ports of the device. Since the whole architecture of generating GIDs and responding to events is port-based, this is inefficient and can lead to wrong content in the GID table. Change the reset flow to be per-port. Signed-off-by: Moni Shoua <[email protected]> Signed-off-by: Or Gerlitz <[email protected]> Signed-off-by: Roland Dreier <[email protected]>
2014-02-13IB/mlx4: Do IBoE locking earlier when initializing the GID tableMoni Shoua1-3/+3
Updating the GID table under IBoE requires read/write from/to shared data structures. These data structures are protected with the device iboe lock. The flows that modify the GID table start from 1. Initializing the GID table 2. NETDEV events 3. INET or INET6 events This patch makes sure that the flow of initializing the GID table is consistent with the other two flows w.r.t on what step the lock is taken. Signed-off-by: Moni Shoua <[email protected]> Signed-off-by: Or Gerlitz <[email protected]> Signed-off-by: Roland Dreier <[email protected]>
2014-02-13IB/mlx4: Move rtnl locking to the right placeMoni Shoua1-2/+2
On the one hand, the invocation of netdev_master_upper_dev_get() within mlx4_ib_scan_netdevs() must be done with rtnl lock held. On the other hand, it's wrong to call rtnl_lock() from within this function since it's also called by our netdev notifier callback. Therefore move the locking to mlx4_ib_add() so that both cases are covered. Signed-off-by: Moni Shoua <[email protected]> Signed-off-by: Or Gerlitz <[email protected]> Signed-off-by: Roland Dreier <[email protected]>
2014-02-13IB/mlx4: Make sure GID index 0 is always occupiedMoni Shoua1-24/+68
Make sure that for Ethernet ports, the port GID table index 0 is always occupied with a default GID of the relevant IPv6 link-local adderss. This provides better user experience for legacy applications that don't use the RDMA CM and were working on index 0 prior to the IP addressing change. Also, as GIDs are generated from IP addresses of the network devices that are associated with the port, it's basically possible that the GID table will be empty if no IP address was assigned. This doesn't comply with the IB spec section 4.1.1 "GID usage and properties". Signed-off-by: Moni Shoua <[email protected]> Signed-off-by: Or Gerlitz <[email protected]> Signed-off-by: Roland Dreier <[email protected]>
2014-02-13tick: Clear broadcast pending bit when switching to oneshotThomas Gleixner1-0/+1
AMD systems which use the C1E workaround in the amd_e400_idle routine trigger the WARN_ON_ONCE in the broadcast code when onlining a CPU. The reason is that the idle routine of those AMD systems switches the cpu into forced broadcast mode early on before the newly brought up CPU can switch over to high resolution / NOHZ mode. The timer related CPU1 bringup looks like this: clockevent_register_device(local_apic); tick_setup(local_apic); ... idle() tick_broadcast_on_off(FORCE); tick_broadcast_oneshot_control(ENTER) cpumask_set(cpu, broadcast_oneshot_mask); halt(); Now the broadcast interrupt on CPU0 sets CPU1 in the broadcast_pending_mask and wakes CPU1. So CPU1 continues: local_apic_timer_interrupt() tick_handle_periodic(); softirq() tick_init_highres(); cpumask_clr(cpu, broadcast_oneshot_mask); tick_broadcast_oneshot_control(ENTER) WARN_ON(cpumask_test(cpu, broadcast_pending_mask); So while we remove CPU1 from the broadcast_oneshot_mask when we switch over to highres mode, we do not clear the pending bit, which then triggers the warning when we go back to idle. The reason why this is only visible on C1E affected AMD systems is that the other machines enter the deep sleep states via acpi_idle/intel_idle and exit the broadcast mode before executing the remote triggered local_apic_timer_interrupt. So the pending bit is already cleared when the switch over to highres mode is clearing the oneshot mask. The solution is simple: Clear the pending bit together with the mask bit when we switch over to highres mode. Stanislaw came up independently with the same patch by enforcing the C1E workaround and debugging the fallout. I picked mine, because mine has a changelog :) Reported-by: poma <[email protected]> Debugged-by: Stanislaw Gruszka <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Cc: Olaf Hering <[email protected]> Cc: Dave Jones <[email protected]> Cc: Justin M. Forbes <[email protected]> Cc: Josh Boyer <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Cc: [email protected] # 3.10+ Signed-off-by: Thomas Gleixner <[email protected]>
2014-02-13lockd: send correct lock when granting a delayed lock.NeilBrown1-0/+8
If an NFS client attempts to get a lock (using NLM) and the lock is not available, the server will remember the request and when the lock becomes available it will send a GRANT request to the client to provide the lock. If the client already held an adjacent lock, the GRANT callback will report the union of the existing and new locks, which can confuse the client. This happens because __posix_lock_file (called by vfs_lock_file) updates the passed-in file_lock structure when adjacent or over-lapping locks are found. To avoid this problem we take a copy of the two fields that can be changed (fl_start and fl_end) before the call and restore them afterwards. An alternate would be to allocate a 'struct file_lock', initialise it, use locks_copy_lock() to take a copy, then locks_release_private() after the vfs_lock_file() call. But that is a lot more work. Reported-by: Olaf Kirch <[email protected]> Signed-off-by: NeilBrown <[email protected]> Cc: [email protected] Signed-off-by: J. Bruce Fields <[email protected]> -- v1 had a couple of issues (large on-stack struct and didn't really work properly). This version is much better tested. Signed-off-by: J. Bruce Fields <[email protected]>
2014-02-13vt: Fix secure clear screenPetr Písař1-0/+2
\E[3J console code (secure clear screen) needs to update_screen(vc) in order to write-through blanks into off-screen video memory. This has been removed accidentally in 3.6 by: commit 81732c3b2fede049a692e58a7ceabb6d18ffb18c Author: Jean-François Moine <[email protected]> Date: Thu Sep 6 19:24:13 2012 +0200 tty vt: Fix line garbage in virtual console on command line edition Signed-off-by: Petr Písař <[email protected]> Cc: stable <[email protected]> # 3.6 Signed-off-by: Greg Kroah-Hartman <[email protected]>
2014-02-13serial: 8250: Support XR17V35x fraction divisorJoe Schultz1-0/+18
The Exar XR17V35x family of UARTs have an additional fractional divisor register (DLD) which was not being used. Calculate and set this register for these devices to reduce their baud rate error. Signed-off-by: Joe Schultz <[email protected]> Signed-off-by: Aaron Sierra <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2014-02-13n_tty: Fix stale echo outputPeter Hurley1-5/+7
When echoes cannot be flushed to output (usually because the tty has no more write room) and L_ECHO is subsequently turned off, then when L_ECHO is turned back on, stale echoes are output. Output completed echoes regardless of the L_ECHO setting: 1. before normal writes to that tty 2. if the tty was stopped by soft flow control and is being restarted Reported-by: Mikulas Patocka <[email protected]> Cc: <[email protected]> # 3.13.x Signed-off-by: Peter Hurley <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2014-02-13serial: sirf: fix kernel panic caused by unpaired spinlockQipan Li1-1/+3
commit 8b9ade9f74f8a279 coming from Viresh Kumar "tty: serial: sirfsoc: drop uart_port->lock before calling tty_flip_buffer_push()" broke sirfsoc uart driver by knic: [ 5.129122] BUG: spinlock already unlocked on CPU#0, ip6tables/1331 [ 5.132554] lock: sirfsoc_uart_ports+0x4/0x8a0, .magic: dead4ead, .owner: <none>/-1, .owner_cpu: -1 [ 5.141651] CPU: 0 PID: 1331 Comm: ip6tables Tainted: G W O 3.10.16 #3 [ 5.148866] [<c0013528>] (unwind_backtrace+0x0/0xe0) from [<c0010e70>] (show_stack+0x10/0x14) [ 5.157362] [<c0010e70>] (show_stack+0x10/0x14) from [<c01a5e68>] (do_raw_spin_unlock+0x40/0xc8) [ 5.166125] [<c01a5e68>] (do_raw_spin_unlock+0x40/0xc8) from [<c03ff8b4>] (_raw_spin_unlock+0x8/0x40) [ 5.175322] [<c03ff8b4>] (_raw_spin_unlock+0x8/0x40) from [<c0203fcc>] (sirfsoc_uart_pio_rx_chars+0xa4/0xc0) [ 5.185120] [<c0203fcc>] (sirfsoc_uart_pio_rx_chars+0xa4/0xc0) from [<c0204fb8>] (sirfsoc_rx_tmo_process_tl+0xdc/0x1e0) [ 5.195875] [<c0204fb8>] (sirfsoc_rx_tmo_process_tl+0xdc/0x1e0) from [<c0024b50>] (tasklet_action+0x8c/0xec) [ 5.205673] [<c0024b50>] (tasklet_action+0x8c/0xec) from [<c00242a8>] (__do_softirq+0xec/0x1d4) [ 5.214347] [<c00242a8>] (__do_softirq+0xec/0x1d4) from [<c0024428>] (do_softirq+0x48/0x54) [ 5.222674] [<c0024428>] (do_softirq+0x48/0x54) from [<c0024690>] (irq_exit+0x74/0xc0) [ 5.230573] [<c0024690>] (irq_exit+0x74/0xc0) from [<c000e1e8>] (handle_IRQ+0x6c/0x90) [ 5.238465] [<c000e1e8>] (handle_IRQ+0x6c/0x90) from [<c000d500>] (__irq_svc+0x40/0x70) [ 5.246446] [<c000d500>] (__irq_svc+0x40/0x70) from [<c0092e7c>] (mark_page_accessed+0xc/0x68) [ 5.255034] [<c0092e7c>] (mark_page_accessed+0xc/0x68) from [<c00a2a4c>] (unmap_single_vma+0x3bc/0x550) [ 5.264402] [<c00a2a4c>] (unmap_single_vma+0x3bc/0x550) from [<c00a3b4c>] (unmap_vmas+0x44/0x54) [ 5.273164] [<c00a3b4c>] (unmap_vmas+0x44/0x54) from [<c00a81a8>] (exit_mmap+0xc4/0x1e0) [ 5.281233] [<c00a81a8>] (exit_mmap+0xc4/0x1e0) from [<c001bb78>] (mmput+0x3c/0xdc) [ 5.288868] [<c001bb78>] (mmput+0x3c/0xdc) from [<c0021b0c>] (do_exit+0x30c/0x828) [ 5.296413] [<c0021b0c>] (do_exit+0x30c/0x828) from [<c0022dac>] (do_group_exit+0x4c/0xb0) [ 5.304653] [<c0022dac>] (do_group_exit+0x4c/0xb0) from [<c0022e20>] (__wake_up_parent+0x0/0x18) Root cause: the commit dropped uart_port->lock before calling tty_flip_buffer_push(), but in sirfsoc-uart, sirfsoc_uart_pio_rx_chars() can be called by sirfsoc_rx_tmo_process_tl(). here uart_port->lock has not been taken yet. so that caused unpaired lock/unlock. Solution: This patch is doing a quick fix for that, it adds spin_lock/unlock(&port->lock) protect to sirfsoc_uart_pio_rx_chars() in sirfsoc_rx_tmo_process_tl() to keep spin_lock/unlock in pair. Signed-off-by: Qipan Li <[email protected]> Signed-off-by: Barry Song <[email protected]> Cc: stable <[email protected]> # 3.12 Signed-off-by: Greg Kroah-Hartman <[email protected]>
2014-02-13serial: 8250_pci: unbreak last serial ports on NetMos 9865 cardsDmitry Eremin-Solenikov1-1/+2
Aparently 9865 uses standard BAR encoding scheme (unlike 99xx cards). Current pci_netmos_9900_setup() uses wrong BAR indices for the 9865 PCI device, function 2. Using standard BAR indices makes all 6 ports work for me. Thus disable the NetMos 9900 quirk for NetMos 9865 pci device. For the reference, here is the relevant part of lspci for my device: 02:07.0 Serial controller: MosChip Semiconductor Technology Ltd. PCI 9865 Multi-I/O Controller (prog-if 02 [16550]) Subsystem: Device a000:1000 Flags: bus master, medium devsel, latency 32, IRQ 17 I/O ports at ac00 [size=8] Memory at fcfff000 (32-bit, non-prefetchable) [size=4K] Memory at fcffe000 (32-bit, non-prefetchable) [size=4K] Capabilities: [48] Power Management version 2 Kernel driver in use: serial 02:07.1 Serial controller: MosChip Semiconductor Technology Ltd. PCI 9865 Multi-I/O Controller (prog-if 02 [16550]) Subsystem: Device a000:1000 Flags: bus master, medium devsel, latency 32, IRQ 18 I/O ports at a800 [size=8] Memory at fcffd000 (32-bit, non-prefetchable) [size=4K] Memory at fcffc000 (32-bit, non-prefetchable) [size=4K] Capabilities: [48] Power Management version 2 Kernel driver in use: serial 02:07.2 Communication controller: MosChip Semiconductor Technology Ltd. PCI 9865 Multi-I/O Controller Subsystem: Device a000:3004 Flags: bus master, medium devsel, latency 32, IRQ 19 I/O ports at a400 [size=8] I/O ports at a000 [size=8] I/O ports at 9c00 [size=8] I/O ports at 9800 [size=8] Memory at fcffb000 (32-bit, non-prefetchable) [size=4K] Capabilities: [48] Power Management version 2 Kernel driver in use: serial Signed-off-by: Dmitry Eremin-Solenikov <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.