aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2022-09-21drm/amd/display: Add shift and mask for ICH_RESET_AT_END_OF_LINEDaniel Miess2-223/+6
[Why] DP DSC compliance failing for dcn314 due to ICH_RESET_AT_END_OF_LINE shift and mask being missing [How] Add in shift and mask for ICH_RESET_AT_END_OF_LINE Reviewed-by: Nicholas Kazlauskas <[email protected]> Acked-by: Wayne Lin <[email protected]> Signed-off-by: Daniel Miess <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-21drm/amd/display: increase dcn315 pstate change latencyDmytro Laktyushkin1-8/+14
[Why & How] Update after new measurment came in Reviewed-by: Jun Lei <[email protected]> Acked-by: Wayne Lin <[email protected]> Signed-off-by: Dmytro Laktyushkin <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-21drm/amd/display: Fix DP MST timeslot issue when fallback happenedCruise Hung1-1/+7
[Why] When USB4 DP link training failed and fell back to lower link rate, the time slot calculation uses the verified_link_cap. And the verified_link_cap was not updated to the new one. It caused the wrong VC payload time-slot was allocated. [How] Updated verified_link_cap with the new one from cur_link_settings after the LT completes successfully. Reviewed-by: Jun Lei <[email protected]> Acked-by: Wayne Lin <[email protected]> Signed-off-by: Cruise Hung <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-21drm/amd/display: Display distortion after hotplug 5K tiled displayMeenakshikumar Somasundaram6-20/+45
[Why] During hot plug of specific 5K tiled display, sometimes both the tiles are not synchronized resulting in distortion. The reason is that otgs of both the tiles goes out of sync when otg workaround (dcnxxx_disable_otg_wa) is applied for bandwidth optimization. The otg workaround reenables otg but otg synchronization context is not reset and hence dc_trigger_sync() does not resynchronize otg again. [How] Implement reset_sync_context_for_pipe() to reset the otg synchronization context for the disabled pipe and its slave pipes when otg workaround is applied. Reviewed-by: Nicholas Kazlauskas <[email protected]> Acked-by: Wayne Lin <[email protected]> Signed-off-by: Meenakshikumar Somasundaram <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-21drm/amd/display: Update dummy P-state search to use DCN32 DMLGeorge Shen2-1/+51
[Why] Current DCN3.2 logic for finding the dummy P-state index uses the DCN3.0 DML validation function instead of DCN3.2 DML. This can result in either unexpected DML VBA values, or unexpected dummy P-state index to be used. [How] Update the dummy P-state logic to use DCN3.2 DML validation function. Reviewed-by: Alvin Lee <[email protected]> Reviewed-by: Nevenko Stupar <[email protected]> Acked-by: Wayne Lin <[email protected]> Signed-off-by: George Shen <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-21drm/amd/display: skip audio setup when audio stream is enabledzhikzhai1-2/+4
[why] We have minimal pipe split transition method to avoid pipe allocation outage.However, this method will invoke audio setup which cause audio output stuck once pipe reallocate. [how] skip audio setup for pipelines which audio stream has been enabled Reviewed-by: Charlene Liu <[email protected]> Acked-by: Wayne Lin <[email protected]> Signed-off-by: zhikzhai <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-21drm/amd/display: update gamut remap if plane has changedHugo Hu1-0/+1
[Why] The desktop plane and full-screen game plane may have different gamut remap coefficients, if switching between desktop and full-screen game without updating the gamut remap will cause incorrect color. [How] Update gamut remap if planes change. Reviewed-by: Dmytro Laktyushkin <[email protected]> Acked-by: Wayne Lin <[email protected]> Signed-off-by: Hugo Hu <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-21drm/amd/display: Assume an LTTPR is always present on fixed_vs linksMichael Strauss1-0/+8
[WHY] LTTPRs can in very rare instsances fail to increment DPCD LTTPR count. This results in aux-i LTTPR requests to be sent to the wrong DPCD address, which causes link training failure. [HOW] Override internal repeater count if fixed_vs flag is set for a given link Reviewed-by: George Shen <[email protected]> Acked-by: Wayne Lin <[email protected]> Signed-off-by: Michael Strauss <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-21drm/amd/display: fix dcn315 memory channel count and width readDmytro Laktyushkin2-3/+7
[Why & How] Correctly set ddr5 channel width to 8 bytes Reviewed-by: Jun Lei <[email protected]> Acked-by: Wayne Lin <[email protected]> Signed-off-by: Dmytro Laktyushkin <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-21drm/amd/display: Fix double cursor on non-video RGB MPOLeo Li1-2/+10
[Why] DC makes use of layer_index (zpos) when picking the HW plane to enable HW cursor on. However, some compositors will not attach zpos information to each DRM plane. Consequently, in amdgpu, we default layer_index to 0 and do not update it. This causes said DC logic to enable HW cursor on all planes of the same layer_index, which manifests as a double cursor issue if one of the planes is scaled (and hence scaling the cursor as well). [How] Use DRM core helpers to calculate a normalized_zpos value for each drm_plane_state under each crtc, within the atomic state. This helper will first consider existing zpos values, and if identical/unset, fallback to plane ID ordering. The normalized_zpos is then passed to dc_plane_info during atomic check for later use by the cursor logic. Reviewed-by: Bhawanpreet Lakha <[email protected]> Acked-by: Wayne Lin <[email protected]> Signed-off-by: Leo Li <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-21drm/amd/display: Only consider pixle rate div policy for DCN32+Alvin Lee3-17/+2
[Why and How] - Only consider pixel rate div policy for DCN32+ Reviewed-by: Martin Leung <[email protected]> Acked-by: Wayne Lin <[email protected]> Signed-off-by: Alvin Lee <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-21drm/amd/display: Port DCN30 420 logic to DCN32Chris Park3-0/+29
[Why] 420 modes are limited by FMT buffer width of 4096 which requires multi-pipe support in form of ODM combine. If 420 modes have greater HActive than 4096, the DML logic should accomodate whether it should be rejected, or ODM combine 2:1 or 4:1 is triggered accordingly. [How] FMT Buffer limit of 4096 in DCN32. Force ODM combine depending on HActive and FMT Buffer limit. Reject modes if TMDS 420 and above 4096. Acked-by: Wayne Lin <[email protected]> Signed-off-by: Chris Park <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-21drm/amdgpu: Update PTE flags with TF enabledMukul Joshi2-4/+6
This patch updates the PTE flags when translate further (TF) is enabled: - With translate_further enabled, invalid PTEs can be 0. Reading consecutive invalid PTEs as 0 is considered a fault. To prevent this, ensure invalid PTEs have at least 1 bit set. - The current invalid PTE flags settings to translate a retry fault into a no-retry fault, doesn't work with TF enabled. As a result, update invalid PTE flags settings which works for both TF enabled and disabled case. Fixes: 352e683b72e79d ("drm/amdgpu: Enable translate_further to extend UTCL2 reach") Reviewed-by: Christian König <[email protected]> Reviewed-by: Felix Kuehling <[email protected]> Signed-off-by: Mukul Joshi <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-14drm/amdgpu/mes: zero the sdma_hqd_mask of 2nd SDMA engine for SDMA 6.0.1Yifan Zhang1-0/+3
there is only one SDMA engine in SDMA 6.0.1, the sdma_hqd_mask has to be zeroed for the 2nd engine, otherwise MES scheduler will consider 2nd engine exists and map/unmap SDMA queues to the non-existent engine. Signed-off-by: Yifan Zhang <[email protected]> Reviewed-by: Tim Huang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-14drm/amdgpu: make sure to init common IP before gmcAlex Deucher1-3/+11
Move common IP init before GMC init so that HDP gets remapped before GMC init which uses it. This fixes the Unsupported Request error reported through AER during driver load. The error happens as a write happens to the remap offset before real remapping is done. Link: https://bugzilla.kernel.org/show_bug.cgi?id=216373 The error was unnoticed before and got visible because of the commit referenced below. This doesn't fix anything in the commit below, rather fixes the issue in amdgpu exposed by the commit. The reference is only to associate this commit with below one so that both go together. Fixes: 8795e182b02d ("PCI/portdrv: Don't disable AER reporting in get_port_device_capability()") Acked-by: Christian König <[email protected]> Reviewed-by: Lijo Lazar <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2022-09-14drm/amdgpu: move nbio sdma_doorbell_range() into sdma code for vegaAlex Deucher2-22/+5
This mirrors what we do for other asics and this way we are sure the sdma doorbell range is properly initialized. There is a comment about the way doorbells on gfx9 work that requires that they are initialized for other IPs before GFX is initialized. However, the statement says that it applies to multimedia as well, but the VCN code currently initializes doorbells after GFX and there are no known issues there. In my testing at least I don't see any problems on SDMA. This is a prerequisite for fixing the Unsupported Request error reported through AER during driver load. Link: https://bugzilla.kernel.org/show_bug.cgi?id=216373 The error was unnoticed before and got visible because of the commit referenced below. This doesn't fix anything in the commit below, rather fixes the issue in amdgpu exposed by the commit. The reference is only to associate this commit with below one so that both go together. Fixes: 8795e182b02d ("PCI/portdrv: Don't disable AER reporting in get_port_device_capability()") Acked-by: Christian König <[email protected]> Reviewed-by: Lijo Lazar <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2022-09-14drm/amdgpu: move nbio ih_doorbell_range() into ih code for vegaAlex Deucher3-3/+8
This mirrors what we do for other asics and this way we are sure the ih doorbell range is properly initialized. There is a comment about the way doorbells on gfx9 work that requires that they are initialized for other IPs before GFX is initialized. In this case IH is initialized before GFX, so there should be no issue. This is a prerequisite for fixing the Unsupported Request error reported through AER during driver load. Link: https://bugzilla.kernel.org/show_bug.cgi?id=216373 The error was unnoticed before and got visible because of the commit referenced below. This doesn't fix anything in the commit below, rather fixes the issue in amdgpu exposed by the commit. The reference is only to associate this commit with below one so that both go together. Fixes: 8795e182b02d ("PCI/portdrv: Don't disable AER reporting in get_port_device_capability()") Acked-by: Christian König <[email protected]> Reviewed-by: Lijo Lazar <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2022-09-13drm/amd/display: Mark dml30's UseMinimumDCFCLK() as noinline for stack usageNathan Chancellor1-2/+1
This function consumes a lot of stack space and it blows up the size of dml30_ModeSupportAndSystemConfigurationFull() with clang: drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn30/display_mode_vba_30.c:3542:6: error: stack frame size (2200) exceeds limit (2048) in 'dml30_ModeSupportAndSystemConfigurationFull' [-Werror,-Wframe-larger-than] void dml30_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_lib) ^ 1 error generated. Commit a0f7e7f759cf ("drm/amd/display: fix i386 frame size warning") aimed to address this for i386 but it did not help x86_64. To reduce the amount of stack space that dml30_ModeSupportAndSystemConfigurationFull() uses, mark UseMinimumDCFCLK() as noinline, using the _for_stack variant for documentation. While this will increase the total amount of stack usage between the two functions (1632 and 1304 bytes respectively), it will make sure both stay below the limit of 2048 bytes for these files. The aforementioned change does help reduce UseMinimumDCFCLK()'s stack usage so it should not be reverted in favor of this change. Link: https://github.com/ClangBuiltLinux/linux/issues/1681 Reported-by: "Sudip Mukherjee (Codethink)" <[email protected]> Tested-by: Maíra Canal <[email protected]> Reviewed-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Nathan Chancellor <[email protected]> Signed-off-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-13drm/amd/display: Reduce number of arguments of dml31's CalculateFlipSchedule()Nathan Chancellor1-125/+47
Most of the arguments are identical between the two call sites and they can be accessed through the 'struct vba_vars_st' pointer. This reduces the total amount of stack space that dml31_ModeSupportAndSystemConfigurationFull() uses by 112 bytes with LLVM 16 (1976 -> 1864), helping clear up the following clang warning: drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn31/display_mode_vba_31.c:3908:6: error: stack frame size (2216) exceeds limit (2048) in 'dml31_ModeSupportAndSystemConfigurationFull' [-Werror,-Wframe-larger-than] void dml31_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_lib) ^ 1 error generated. Link: https://github.com/ClangBuiltLinux/linux/issues/1681 Reported-by: "Sudip Mukherjee (Codethink)" <[email protected]> Tested-by: Maíra Canal <[email protected]> Reviewed-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Nathan Chancellor <[email protected]> Signed-off-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-13drm/amd/display: Reduce number of arguments of dml31's ↵Nathan Chancellor1-196/+52
CalculateWatermarksAndDRAMSpeedChangeSupport() Most of the arguments are identical between the two call sites and they can be accessed through the 'struct vba_vars_st' pointer. This reduces the total amount of stack space that dml31_ModeSupportAndSystemConfigurationFull() uses by 240 bytes with LLVM 16 (2216 -> 1976), helping clear up the following clang warning: drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn31/display_mode_vba_31.c:3908:6: error: stack frame size (2216) exceeds limit (2048) in 'dml31_ModeSupportAndSystemConfigurationFull' [-Werror,-Wframe-larger-than] void dml31_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_lib) ^ 1 error generated. Link: https://github.com/ClangBuiltLinux/linux/issues/1681 Reported-by: "Sudip Mukherjee (Codethink)" <[email protected]> Tested-by: Maíra Canal <[email protected]> Reviewed-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Nathan Chancellor <[email protected]> Signed-off-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-13drm/amd/display: Reduce number of arguments of dml32_CalculatePrefetchSchedule()Nathan Chancellor3-133/+78
Several of the arguments are identical between the two call sites and they can be accessed through the 'struct vba_vars_st' pointer. This reduces the total amount of stack space that dml32_ModeSupportAndSystemConfigurationFull() uses by 208 bytes with LLVM 16 (1936 -> 1728), helping clear up the following clang warning: drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/display_mode_vba_32.c:1721:6: error: stack frame size (2152) exceeds limit (2048) in 'dml32_ModeSupportAndSystemConfigurationFull' [-Werror,-Wframe-larger-than] void dml32_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_lib) ^ 1 error generated. Additionally, while modifying the arguments to dml32_CalculatePrefetchSchedule(), use 'v' consistently, instead of 'v' mixed with 'mode_lib->vba'. Link: https://github.com/ClangBuiltLinux/linux/issues/1681 Reported-by: "Sudip Mukherjee (Codethink)" <[email protected]> Tested-by: Maíra Canal <[email protected]> Reviewed-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Nathan Chancellor <[email protected]> Signed-off-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-13drm/amd/display: Reduce number of arguments of ↵Nathan Chancellor3-259/+140
dml32_CalculateWatermarksMALLUseAndDRAMSpeedChangeSupport() Most of the arguments are identical between the two call sites and they can be accessed through the 'struct vba_vars_st' pointer created at the top of dml32_ModeSupportAndSystemConfigurationFull(). This reduces the total amount of stack space that dml32_ModeSupportAndSystemConfigurationFull() uses by 216 bytes with LLVM 16 (2152 -> 1936), helping clear up the following clang warning: drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/display_mode_vba_32.c:1721:6: error: stack frame size (2152) exceeds limit (2048) in 'dml32_ModeSupportAndSystemConfigurationFull' [-Werror,-Wframe-larger-than] void dml32_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_lib) ^ 1 error generated. Additionally, while modifying the arguments to dml32_CalculateWatermarksMALLUseAndDRAMSpeedChangeSupport(), use 'v' consistently, instead of 'v' mixed with 'mode_lib->vba'. Link: https://github.com/ClangBuiltLinux/linux/issues/1681 Reported-by: "Sudip Mukherjee (Codethink)" <[email protected]> Tested-by: Maíra Canal <[email protected]> Reviewed-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Nathan Chancellor <[email protected]> Signed-off-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-13drm/amd/display: Refactor SubVP calculation to remove FPUAlvin Lee1-45/+44
Refactor calculation to remove floating point operations from dmub_srv. To ensure that 32-bit compilation works well, we use the div64 family of macros to do integer division for SubVP-related timing parameters. Cc: Maíra Canal <[email protected]> Cc: Alex Deucher <[email protected]> Cc: Isabella Basso <[email protected]> Cc: Magali Lemes <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Reviewed-by: Samson Tam <[email protected]> Acked-by: Tom Chung <[email protected]> Signed-off-by: Alvin Lee <[email protected]> Co-developed-by: Aurabindo Pillai <[email protected]> Signed-off-by: Aurabindo Pillai <[email protected]> Co-developed-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-13drm/amd/display: Limit user regamma to a valid valueYao Wang11-0/+4
[Why] For HDR mode, we get total 512 tf_point and after switching to SDR mode we actually get 400 tf_point and the rest of points(401~512) still use dirty value from HDR mode. We should limit the rest of the points to max value. [How] Limit the value when coordinates_x.x > 1, just like what we do in translate_from_linear_space for other re-gamma build paths. Tested-by: Daniel Wheeler <[email protected]> Reviewed-by: Krunoslav Kovac <[email protected]> Reviewed-by: Aric Cyr <[email protected]> Acked-by: Pavle Kotarac <[email protected]> Signed-off-by: Yao Wang1 <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-13drm/amd/display: add workaround for subvp cursor corruption for DCN32/321Aurabindo Pillai2-2/+4
[Why&How] Kernel does not have a means to tell the userspace to use software cursor. Due to lack of this functionality, reducing the max cursor size is the only way to ensure that power savings of Subview port feature is utilized for asics that support it. The workaround could be removed after cursor caching is fixed while a subviewport config is active. Tested-by: Daniel Wheeler <[email protected]> Reviewed-by: Alvin Lee <[email protected]> Acked-by: Pavle Kotarac <[email protected]> Signed-off-by: Aurabindo Pillai <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-13drm/amd/display: SW cursor fallback for SubVPAlvin Lee4-0/+8
[Description] Leverage SW cursor fall back for SubVP when the cursor is too big. We want to take advantage of being able to fallback to SW cursor when possible because it's not worth it to disable MCLK switching because the cursor is slightly too big. Tested-by: Daniel Wheeler <[email protected]> Reviewed-by: Aurabindo Pillai <[email protected]> Acked-by: Pavle Kotarac <[email protected]> Signed-off-by: Alvin Lee <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-13drm/amd/display: Round cursor width up for MALL allocationTaimur Hassan2-2/+46
[Why & How] When calculating cursor size for MALL allocation, the cursor width should be the actual width rounded up to 64 alignment. Additionally, the bit depth should vary depending on color format. Tested-by: Daniel Wheeler <[email protected]> Reviewed-by: Alvin Lee <[email protected]> Acked-by: Pavle Kotarac <[email protected]> Signed-off-by: Taimur Hassan <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-13drm/amd/display: Correct dram channel width for dcn314Duncan Ma3-0/+6
[Why] The interpretation of the number of memory channels differ by memory type, and this affects channel width for the DML input. [How] Set dram channel width according to memory type for dcn314. Tested-by: Daniel Wheeler <[email protected]> Reviewed-by: Nicholas Kazlauskas <[email protected]> Reviewed-by: Jun Lei <[email protected]> Acked-by: Pavle Kotarac <[email protected]> Signed-off-by: Duncan Ma <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-13drm/amd/display: Relax swizzle checks for video non-RGB formats on DCN314Nicholas Kazlauskas1-3/+1
[Why] HW can support the display swizzle modes for video, and those are preferable over standard or linear for decode use. [How] Remove the check for DCN314. Tested-by: Daniel Wheeler <[email protected]> Reviewed-by: Jun Lei <[email protected]> Acked-by: Pavle Kotarac <[email protected]> Signed-off-by: Nicholas Kazlauskas <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-13drm/amd/display: Hook up DCN314 specific dml implementationNicholas Kazlauskas3-1/+14
[Why & How] Add support for the DML314 functions and hook up DCN314 to use them. This has some necessary additions for calculating Max VSTARTUP for future features, but there's also some changes that we have to make for pixel format/swizzle support. That will come in a following patch to make this transition easier to bisect. Tested-by: Daniel Wheeler <[email protected]> Reviewed-by: Jun Lei <[email protected]> Acked-by: Pavle Kotarac <[email protected]> Signed-off-by: Nicholas Kazlauskas <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-13drm/amd/display: Enable dlg and vba compilation for dcn314Rodrigo Siqueira1-0/+3
We were not using the VBA and DLG files for DCN314, but the next sequence of changes for DCN314 will require those files. This commit adds the necessary files to the Makefile. Cc: Roman Li <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-13drm/amd/display: Fix compilation errors on DCN314Rodrigo Siqueira1-4/+5
We have some compilation errors in some DML files from DCN314 that we never noticed because we were not compiling some of the DML files. This commit fixes those syntax errors before we enable the compilation. Cc: Roman Li <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-13drm/amd/display: Fix divide by zero in DMLAric Cyr2-18/+16
[why] Incorrectly using MicroTileWidth instead of MacroTileWidth for calculations. [how] Remove all unused references to MicroTile and change them to MacroTile. Tested-by: Daniel Wheeler <[email protected]> Reviewed-by: Alvin Lee <[email protected]> Reviewed-by: Jun Lei <[email protected]> Acked-by: Pavle Kotarac <[email protected]> Signed-off-by: Aric Cyr <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-13drm/amd/display: Fixing DIG FIFO ErrorLeo Chen1-2/+1
[Why & How] DIG_FIFO_READ_START_LEVEL should only be set to default value (7) by software. Removed all instances of resetting the register to 0 Tested-by: Daniel Wheeler <[email protected]> Reviewed-by: Nicholas Kazlauskas <[email protected]> Acked-by: Pavle Kotarac <[email protected]> Signed-off-by: Leo Chen <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-13drm/amd/display: Update MBLK calculation for SubVPAlvin Lee2-8/+54
[Description] Update MBLK calculation according to hardware doc. For DCC case we were not allocation enough MALL due to an inaccurate MBLK calculation. Tested-by: Daniel Wheeler <[email protected]> Reviewed-by: Jun Lei <[email protected]> Acked-by: Pavle Kotarac <[email protected]> Signed-off-by: Alvin Lee <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-13drm/amd/display: Revert "Fallback to SW cursor if SubVP + cursor too big"Aurabindo Pillai1-5/+0
This reverts commit a4f1b04216023ff0f4cd89328b59ee6890248130 since returning false in case of SubVP results in no cursor being visible on desktop as there is no sw cursor fallback path on all platforms. Tested-by: Daniel Wheeler <[email protected]> Reviewed-by: Alvin Lee <[email protected]> Acked-by: Pavle Kotarac <[email protected]> Signed-off-by: Aurabindo Pillai <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-13drm/amdgpu: Skip reset error status for psp v13_0_0Candice Li1-1/+2
No need to reset error status since only umc ras supported on psp v13_0_0. Signed-off-by: Candice Li <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-13drm/amdgpu: add HDP remap functionality to nbio 7.7Alex Deucher1-0/+9
Was missing before and would have resulted in a write to a non-existant register. Normally APUs don't use HDP, but other asics could use this code and APUs do use the HDP when used in passthrough. Reviewed-by: Lijo Lazar <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-13drm/amdgpu: change the alignment size of TMR BO to 1MYang Wang2-1/+2
align TMR BO size TO tmr size is not necessary, modify the size to 1M to avoid re-create BO fail when serious VRAM fragmentation. v2: add new macro PSP_TMR_ALIGNMENT for TMR BO alignment size Signed-off-by: Yang Wang <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-13drm/amdgpu: Enable full reset when RAS is supported on gc v11_0_0Candice Li1-0/+1
Enable full reset for RAS supported configuration on gc v11_0_0. v2: simplify the code. Signed-off-by: Candice Li <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-13drm/amdgpu: use dirty framebuffer helperHamza Mahfooz1-0/+2
Currently, we aren't handling DRM_IOCTL_MODE_DIRTYFB. So, use drm_atomic_helper_dirtyfb() as the dirty callback in the amdgpu_fb_funcs struct. Signed-off-by: Hamza Mahfooz <[email protected]> Acked-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-13drm/amdgpu: Don't enable LTR if not supportedLijo Lazar3-3/+24
As per PCIE Base Spec r4.0 Section 6.18 'Software must not enable LTR in an Endpoint unless the Root Complex and all intermediate Switches indicate support for LTR.' This fixes the Unsupported Request error reported through AER during ASPM enablement. Link: https://bugzilla.kernel.org/show_bug.cgi?id=216455 The error was unnoticed before and got visible because of the commit referenced below. This doesn't fix anything in the commit below, rather fixes the issue in amdgpu exposed by the commit. The reference is only to associate this commit with below one so that both go together. Fixes: 8795e182b02d ("PCI/portdrv: Don't disable AER reporting in get_port_device_capability()") Reported-by: Gustaw Smolarczyk <[email protected]> Signed-off-by: Lijo Lazar <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Cc: [email protected] Signed-off-by: Alex Deucher <[email protected]>
2022-09-13drm/amd/pm: disable BACO entry/exit completely on several sienna cichlid cardsGuchun Chen1-0/+11
To avoid hardware intermittent failures. Signed-off-by: Guchun Chen <[email protected]> Reviewed-by: Lijo Lazar <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-10Merge tag 'drm-intel-fixes-2022-09-08' of ↵Dave Airlie7-11/+94
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - Fix MIPI sequence block copy from BIOS' table. (Ville) - Fix PCODE min freq setup when GuC's SLPC is in use. (Rodrigo) - Implement Workaround for eDP. (Ville) - Fix has_flat_ccs selection for DG1. (Matt) Signed-off-by: Dave Airlie <[email protected]> From: Rodrigo Vivi <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2022-09-10Merge tag 'drm-misc-fixes-2022-09-08' of ↵Dave Airlie6-15/+46
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes Short summary of fixes pull: * edid: Fix EDID 1.4 range-descriptor parsing * panfrost: Fix devfreq OPP * ttm: Fix ghost-object bulk moves Signed-off-by: Dave Airlie <[email protected]> From: Thomas Zimmermann <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/YxniKN4rK4qPp+J9@linux-uq9g
2022-09-08drm/panfrost: devfreq: set opp to the recommended one to configure regulatorClément Péron1-0/+11
Enabling panfrost GPU OPP with dynamic regulator will make OPP responsible to enable and configure it. Unfortunately OPP configure and enable the regulator when an OPP is asked to be set, which is not the case during panfrost_devfreq_init(). This leave the regulator unconfigured and if no GPU load is triggered, no OPP is asked to be set which make the regulator framework switching it off during regulator_late_cleanup() without noticing and therefore make the board hang as any access to GPU memory space make bus locks up. Call dev_pm_opp_set_opp() with the recommend OPP in panfrost_devfreq_init() to enable the regulator, this will properly configure and enable the regulator and will avoid any switch off by regulator_late_cleanup(). Suggested-by: Viresh Kumar <[email protected]> Signed-off-by: Clément Péron <[email protected]> Reviewed-by: Steven Price <[email protected]> Signed-off-by: Steven Price <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2022-09-08drm/ttm: cleanup the resource of ghost objects after locking themChristian König1-5/+5
Otherwise lockdep will complain about cleaning up the bulk_move. Signed-off-by: Christian König <[email protected]> Reviewed-by: Matthew Auld <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Fixes: d91c411c744b ("drm/ttm: update bulk move object of ghost BO")
2022-09-08Merge tag 'amd-drm-fixes-6.0-2022-09-07' of ↵Dave Airlie6-9/+9
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-6.0-2022-09-07: amdgpu: - Firmware header fix - SMU 13.x fix - Debugfs memory leak fix - NBIO 7.7 fix - Firmware memory leak fix amdkfd: - Debug output fix Signed-off-by: Dave Airlie <[email protected]> From: Alex Deucher <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2022-09-07drm/amdgpu: prevent toc firmware memory leakGuchun Chen1-2/+5
It's missed in psp fini. Signed-off-by: Guchun Chen <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-07drm/amdgpu: correct doorbell range/size value for CSDMA_DOORBELL_RANGEYifan Zhang1-6/+0
current function mixes CSDMA_DOORBELL_RANGE and SDMA0_DOORBELL_RANGE range/size manipulation, while these 2 registers have difference size field mask. Remove range/size manipulation for SDMA0_DOORBELL_RANGE. Signed-off-by: Yifan Zhang <[email protected]> Reviewed-by: Xiaojian Du <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.