aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2018-02-28Merge tag 'arm-soc/for-4.16/drivers-fixes' of ↵Arnd Bergmann1-14/+60
https://github.com/Broadcom/stblinux into fixes Pull "Broadcom drivers fixes for 4.16" from Florian Fainelli: This pull request contains Broadcom SoCs drivers fixes for 4.16, please pull the following: - Markus provides two minor fixes to the Broadcom STB DPFE driver, one to properly mask bits, and a second one to use the correct type. The third commit is a consequence of a newer DFPE firmware which would unfortunately crash without appropriate kernel changes. * tag 'arm-soc/for-4.16/drivers-fixes' of https://github.com/Broadcom/stblinux: memory: brcmstb: dpfe: support new way of passing data from the DCPU memory: brcmstb: dpfe: fix type declaration of variable "ret" memory: brcmstb: dpfe: properly mask vendor error bits
2018-02-28Merge tag 'arm-soc/for-4.16/devicetree-fixes' of ↵Arnd Bergmann7-14/+14
https://github.com/Broadcom/stblinux into fixes Pull "Broadcom devicetree fixes for 4.16" from Florian Fainelli: This pull request contains Broadcom ARM-based SoCs Device Tree fixes for 4.16, please pull the following: - Mathieu fixes leading 0x and 0's from bindings and Device Tree source files, he has done this treewide and most of his changes are already in 4.16 - Stefan provides two changes to the BCM283x DTS files in order to fix DTC warnings - Florian fixes the amount of RAM on the BCM958625HR reference board to properly limit to what is initialized by the bootloader * tag 'arm-soc/for-4.16/devicetree-fixes' of https://github.com/Broadcom/stblinux: ARM: dts: bcm283x: Move arm-pmu out of soc node ARM: dts: bcm283x: Fix unit address of local_intc ARM: dts: NSP: Fix amount of RAM on BCM958625HR ARM: BCM: dts: Remove leading 0x and 0s from bindings notation
2018-02-28MAINTAINERS: update entries for ARM/STM32Alexandre Torgue1-1/+3
Changes old git repository to the maintained one and adds more patterns. Signed-off-by: Alexandre Torgue <[email protected]> Acked-by: Maxime Coquelin <[email protected]> Signed-off-by: Arnd Bergmann <[email protected]>
2018-02-28Merge tag 'imx-fixes-4.16' of ↵Arnd Bergmann2-2/+10
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes Pull "i.MX fixes for 4.16" from Shawn Guo: - Fix i.MX GPC driver to remove power domains only when they are initialized in imx_gpc_probe(). - Fix the broken Engicam i.CoreM6 DualLite/Solo RQS board DT to include imx6dl.dtsi instead of imx6q.dtsi. * tag 'imx-fixes-4.16' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: imx6dl: Include correct dtsi file for Engicam i.CoreM6 DualLite/Solo RQS soc: imx: gpc: de-register power domains only if initialized
2018-02-28Merge tag 'linux-kselftest-4.16-rc4' of ↵Linus Torvalds8-16/+19
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kselftest fixes from Shuah Khan: "Fixes for various problems in test output, compile errors, and missing configs" * tag 'linux-kselftest-4.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests: vm: update .gitignore with new test selftests: memory-hotplug: silence test command echo selftests/futex: Fix line continuation in Makefile selftests: memfd: add config fragment for fuse selftests: pstore: Adding config fragment CONFIG_PSTORE_RAM=m selftests/android: Fix line continuation in Makefile selftest/vDSO: fix O= selftests: sync: missing CFLAGS while compiling
2018-02-28drm/amdgpu: skip ECC for SRIOV in gmc late_initMonk Liu1-1/+1
Signed-off-by: Monk Liu <[email protected]> Acked-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-02-28drm/amd/amdgpu: Correct VRAM width for APUs with GMC9Tom St Denis1-1/+4
DDR4 has a 64-bit width not 128-bits. It was reporting twice the width. Tested with my Ryzen 2400G. Signed-off-by: Tom St Denis <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-02-28drm/amdgpu: fix&cleanups for wb_clearMonk Liu2-3/+4
fix: should do right shift on wb before clearing cleanups: 1,should memset all wb buffer 2,set max wb number to 128 (total 4KB) is big enough Signed-off-by: Monk Liu <[email protected]> Acked-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-02-28drm/amdgpu: Correct sdma_v4 get_wptr(v2)Emily Deng1-11/+7
the original method will change the wptr value in wb. v2: furthur cleanup Signed-off-by: Emily Deng <[email protected]> Signed-off-by: Monk Liu <[email protected]> Reviewed-by: Christian König <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-02-28drm/amd/powerplay: fix power over limit on FijiEric Huang1-7/+0
power containment disabled only on Fiji and compute power profile. It violates PCIe spec and may cause power supply failed. Enabling it will fix the issue, even the fix will drop performance of some compute tests. Signed-off-by: Eric Huang <[email protected]> Reviewed-by: Felix Kuehling <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2018-02-28drm/amdgpu:Fixed wrong emit frame size for encJames Zhu1-1/+1
Emit frame size should match with corresponding function, uvd_v6_0_enc_ring_emit_vm_flush has 5 amdgpu_ring_write Signed-off-by: James Zhu <[email protected]> Reviewed-by: Christian König <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-02-28drm/amdgpu: move WB_FREE to correct placeMonk Liu1-5/+7
WB_FREE should be put after all engines's hw_fini done, otherwise the invalid wptr/rptr_addr would still be used by engines which trigger abnormal bugs. This fixes couple DMAR reading error in host side for SRIOV after guest kmd is unloaded. Signed-off-by: Monk Liu <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-02-28drm/amdgpu: only flush hotplug work without DCMonk Liu1-2/+4
since hotplug_work is initialized under the case of no dc support Signed-off-by: Monk Liu <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-02-28drm/amd/display: check for ipp before calling cursor operationsShirish S1-2/+4
Currently all cursor related functions are made to all pipes that are attached to a particular stream. This is not applicable to pipes that do not have cursor plane initialised like underlay. Hence this patch allows cursor related operations on a pipe only if ipp in available on that particular pipe. The check is added to set_cursor_position & set_cursor_attribute. Signed-off-by: Shirish S <[email protected]> Reviewed-by: Harry Wentland <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2018-02-28Merge tag 'xfs-4.16-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds4-5/+13
Pull xfs fixes from Darrick Wong: - fix some compiler warnings - fix block reservations for transactions created during log recovery - fix resource leaks when respecifying mount options * tag 'xfs-4.16-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: fix potential memory leak in mount option parsing xfs: reserve blocks for refcount / rmap log item recovery xfs: use memset to initialize xfs_scrub_agfl_info
2018-02-28x86/xen: add tty0 and hvc0 as preferred consoles for dom0Juergen Gross1-2/+4
Today the tty0 and hvc0 consoles are added as a preferred consoles for pv domUs only. As this requires a boot parameter for getting dom0 messages per default, add them for dom0, too. Signed-off-by: Juergen Gross <[email protected]> Reviewed-by: Boris Ostrovsky <[email protected]> Signed-off-by: Juergen Gross <[email protected]>
2018-02-28xen-netfront: Fix hang on device removalJason Andryuk1-1/+6
A toolstack may delete the vif frontend and backend xenstore entries while xen-netfront is in the removal code path. In that case, the checks for xenbus_read_driver_state would return XenbusStateUnknown, and xennet_remove would hang indefinitely. This hang prevents system shutdown. xennet_remove must be able to handle XenbusStateUnknown, and netback_changed must also wake up the wake_queue for that state as well. Fixes: 5b5971df3bc2 ("xen-netfront: remove warning when unloading module") Signed-off-by: Jason Andryuk <[email protected]> Cc: Eduardo Otubo <[email protected]> Reviewed-by: Boris Ostrovsky <[email protected]> Signed-off-by: Juergen Gross <[email protected]>
2018-02-28xen/pirq: fix error path cleanup when binding MSIsRoger Pau Monne1-2/+2
Current cleanup in the error path of xen_bind_pirq_msi_to_irq is wrong. First of all there's an off-by-one in the cleanup loop, which can lead to unbinding wrong IRQs. Secondly IRQs not bound won't be freed, thus leaking IRQ numbers. Note that there's no need to differentiate between bound and unbound IRQs when freeing them, __unbind_from_irq will deal with both of them correctly. Fixes: 4892c9b4ada9f9 ("xen: add support for MSI message groups") Reported-by: Hooman Mirhadi <[email protected]> Signed-off-by: Roger Pau Monné <[email protected]> Reviewed-by: Amit Shah <[email protected]> Reviewed-by: Boris Ostrovsky <[email protected]> Signed-off-by: Juergen Gross <[email protected]>
2018-02-28Merge branch 'for-jens' of git://git.infradead.org/nvme into for-linusJens Axboe7-23/+28
Pull NVMe fixes from Keith for 4.16-rc. * 'for-jens' of git://git.infradead.org/nvme: nvmet: fix PSDT field check in command format nvme-multipath: fix sysfs dangerously created links nvme-pci: Fix nvme queue cleanup if IRQ setup fails nvmet-loop: use blk_rq_payload_bytes for sgl selection nvme-rdma: use blk_rq_payload_bytes instead of blk_rq_bytes nvme-fabrics: don't check for non-NULL module in nvmf_register_transport
2018-02-28Merge tag 'dma-mapping-4.16-3' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds1-5/+5
Pull dma-mapping fix from Christoph Hellwig: "A single fix for a memory leak regression in the dma-debug code" * tag 'dma-mapping-4.16-3' of git://git.infradead.org/users/hch/dma-mapping: dma-debug: fix memory leak in debug_dma_alloc_coherent
2018-02-28drm/i915: Make global seqno known in i915_gem_request_execute tracepointTvrtko Ursulin1-2/+2
Commit fe49789fab97 ("drm/i915: Deconstruct execute fence") re-arranged the code and moved the i915_gem_request_execute tracepoint to before the global seqno is assigned to the request. We need to move the tracepoint a bit later so this information is once again available. Signed-off-by: Tvrtko Ursulin <[email protected]> Fixes: fe49789fab97 ("drm/i915: Deconstruct execute fence") Cc: Chris Wilson <[email protected]> Cc: Tvrtko Ursulin <[email protected]> Cc: Jani Nikula <[email protected]> Cc: Joonas Lahtinen <[email protected]> Cc: Rodrigo Vivi <[email protected]> Cc: [email protected] Reviewed-by: Chris Wilson <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit 158863fb50968c0ae85e87a401221425c941b9f0) Signed-off-by: Rodrigo Vivi <[email protected]>
2018-02-28drm/i915: Clear the in-use marker on execbuf failureChris Wilson1-0/+2
If we fail to unbind the vma (due to a signal on an active buffer that needs to be moved for the next execbuf), then we need to clear the persistent tracking state we setup for this execbuf. Fixes: c7c6e46f913b ("drm/i915: Convert execbuf to use struct-of-array packing for critical fields") Testcase: igt/gem_fenced_exec_thrash/no-spare-fences-busy* Signed-off-by: Chris Wilson <[email protected]> Cc: Tvrtko Ursulin <[email protected]> Cc: Joonas Lahtinen <[email protected]> Cc: <[email protected]> # v4.14+ Reviewed-by: Tvrtko Ursulin <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit ed2f3532321083cf40e4da4e36234880e0136136) Signed-off-by: Rodrigo Vivi <[email protected]>
2018-02-28drm/i915/cnl: Fix PORT_TX_DW5/7 register addressMahesh Kumar1-2/+2
Register Address for CNL_PORT_DW5_LN0_D is 0x162E54, but current code is defining it as 0x162ED4. Similarly for CNL_PORT_DW7_LN0_D register address is defined 0x162EDC instead of 0x162E5C, fix it. Signed-off-by: Mahesh Kumar <[email protected]> Fixes: 04416108ccea ("drm/i915/cnl: Add registers related to voltage swing sequences.") Reviewed-by: Rodrigo Vivi <[email protected]> Signed-off-by: Rodrigo Vivi <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit e103962611b2d464be6ab596d7b3495fe7b4c132) Signed-off-by: Rodrigo Vivi <[email protected]>
2018-02-28drm/i915/audio: fix check for av_enc_map overflowJani Nikula1-3/+3
Turns out -1 >= ARRAY_SIZE() is always true. Move the bounds check where we know pipe >= 0 and next to the array indexing where it makes most sense. Fixes: 9965db26ac05 ("drm/i915: Check for fused or unused pipes") Fixes: 0b7029b7e43f ("drm/i915: Check for fused or unused pipes") Cc: <[email protected]> # v4.10+ Cc: Mika Kahola <[email protected]> Cc: Rodrigo Vivi <[email protected]> Cc: Jani Nikula <[email protected]> Cc: Joonas Lahtinen <[email protected]> Cc: [email protected] Reviewed-by: Dhinakaran Pandiyan <[email protected]> Reviewed-by: Mika Kahola <[email protected]> Signed-off-by: Jani Nikula <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit cdb3db8542d854bd678d60cd28861b042e191672) Signed-off-by: Rodrigo Vivi <[email protected]>
2018-02-28drm/i915: Fix rsvd2 mask when out-fence is returnedDaniele Ceraolo Spurio1-1/+1
GENMASK_ULL wants the high bit of the mask first. The current value cancels the in-fence when an out-fence is returned. Fixes: fec0445caa273 ("drm/i915: Support explicit fencing for execbuf") Testcase: igt/gem_exec_fence/keep-in-fence* Cc: Chris Wilson <[email protected]> Signed-off-by: Daniele Ceraolo Spurio <[email protected]> Reviewed-by: Chris Wilson <[email protected]> Signed-off-by: Chris Wilson <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Cc: <[email protected]> # v4.12+ (cherry picked from commit b6a88e4a804cf5a71159906e16df2c1fc7196f92) Signed-off-by: Rodrigo Vivi <[email protected]>
2018-02-28Documentation, x86, resctrl: Make text and sample command matchLi RongQing1-1/+1
The text says "Move the cpus 4-7 over to p1", but the sample command writes to p0/cpus. Signed-off-by: Li RongQing <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Cc: [email protected] Cc: [email protected] Link: https://lkml.kernel.org/r/[email protected]
2018-02-28dt-bindings/irqchip/renesas-irqc: Document R-Car M3-N supportGeert Uytterhoeven1-0/+1
Document support for the Interrupt Controller for Externel Devices (INTC-EX) in the Renesas M3-N (r8a77965) SoC. No driver update is needed. Signed-off-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Reviewed-by: Simon Horman <[email protected]> Cc: Mark Rutland <[email protected]> Cc: [email protected] Cc: Jason Cooper <[email protected]> Cc: Marc Zyngier <[email protected]> Cc: [email protected] Cc: Rob Herring <[email protected]> Link: https://lkml.kernel.org/r/1519658712-22910-1-git-send-email-geert%[email protected]
2018-02-28ARC: setup cpu possible mask according to possible-cpus dts propertyEugeniy Paltsev1-10/+40
As we have option in u-boot to set CPU mask for running linux, we want to pass information to kernel about CPU cores should be brought up. So we patch kernel dtb in u-boot to set possible-cpus property. This also allows us to have correctly setuped MCIP debug mask. Signed-off-by: Eugeniy Paltsev <[email protected]> Signed-off-by: Vineet Gupta <[email protected]>
2018-02-28ARC: mcip: update MCIP debug mask when the new cpu came onlineEugeniy Paltsev2-5/+34
As of today we use hardcoded MCIP debug mask, so if we launch kernel via debugger and kick fever cores than HW has all cpus hang at the momemt of setup MCIP debug mask. So update MCIP debug mask when the new cpu came online, instead of use hardcoded MCIP debug mask. Signed-off-by: Eugeniy Paltsev <[email protected]> Signed-off-by: Vineet Gupta <[email protected]>
2018-02-28ARC: mcip: halt GFRC counter when ARC cores haltEugeniy Paltsev2-0/+40
In SMP systems, GFRC is used for clocksource. However by default the counter keeps running even when core is halted (say when debugging via a JTAG debugger). This confuses Linux timekeeping and triggers flase RCU stall splat such as below: | [ARCLinux]# while true; do ./shm_open_23-1.run-test ; done | Running with 1000 processes for 1000 objects | hrtimer: interrupt took 485060 ns | | create_cnt: 1000 | Running with 1000 processes for 1000 objects | [ARCLinux]# INFO: rcu_preempt self-detected stall on CPU | 2-...: (1 GPs behind) idle=a01/1/0 softirq=135770/135773 fqs=0 | INFO: rcu_preempt detected stalls on CPUs/tasks: | 0-...: (1 GPs behind) idle=71e/0/0 softirq=135264/135264 fqs=0 | 2-...: (1 GPs behind) idle=a01/1/0 softirq=135770/135773 fqs=0 | 3-...: (1 GPs behind) idle=4e0/0/0 softirq=134304/134304 fqs=0 | (detected by 1, t=13648 jiffies, g=31493, c=31492, q=1) Starting from ARC HS v3.0 it's possible to tie GFRC to state of up-to 4 ARC cores with help of GFRC's CORE register where we set a mask for cores which state we need to rely on. We update cpu mask every time new cpu came online instead of using hardcoded one or using mask generated from "possible_cpus" as we want it set correctly even if we run kernel on HW which has fewer cores than expected (or we launch kernel via debugger and kick fever cores than HW has) Note that GFRC halts when all cores have halted and thus relies on programming of Inter-Core-dEbug register to halt all cores when one halts. Signed-off-by: Alexey Brodkin <[email protected]> Signed-off-by: Eugeniy Paltsev <[email protected]> Signed-off-by: Vineet Gupta <[email protected]> [vgupta: rewrote changelog]
2018-02-28ARCv2: boot log: fix HS48 release numberVineet Gupta1-1/+1
Signed-off-by: Vineet Gupta <[email protected]>
2018-02-28Merge tag 'devicetree-fixes-for-4.16' of ↵Linus Torvalds3-1/+26
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull DeviceTree fixes from Rob Herring: - update i.MX thermal binding example to use current binding, not the deprecated one - move arm-charlcd to auxdisplay/ - fix misspelling of "debounce-interval" * tag 'devicetree-fixes-for-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: power: Fix "debounce-interval" property misspelling auxdisplay: Move arm-charlcd binding to correct folder dt-bindings: thermal: imx: update the binding to new method
2018-02-28x86/platform/intel-mid: Handle Intel Edison reboot correctlySebastian Panceac1-1/+1
When the Intel Edison module is powered with 3.3V, the reboot command makes the module stuck. If the module is powered at a greater voltage, like 4.4V (as the Edison Mini Breakout board does), reboot works OK. The official Intel Edison BSP sends the IPCMSG_COLD_RESET message to the SCU by default. The IPCMSG_COLD_BOOT which is used by the upstream kernel is only sent when explicitely selected on the kernel command line. Use IPCMSG_COLD_RESET unconditionally which makes reboot work independent of the power supply voltage. [ tglx: Massaged changelog ] Fixes: bda7b072de99 ("x86/platform/intel-mid: Implement power off sequence") Signed-off-by: Sebastian Panceac <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Acked-by: Andy Shevchenko <[email protected]> Cc: [email protected] Link: https://lkml.kernel.org/r/[email protected]
2018-02-28nvmet: fix PSDT field check in command formatMax Gurtovoy1-3/+6
PSDT field section according to NVM_Express-1.3: "This field specifies whether PRPs or SGLs are used for any data transfer associated with the command. PRPs shall be used for all Admin commands for NVMe over PCIe. SGLs shall be used for all Admin and I/O commands for NVMe over Fabrics. This field shall be set to 01b for NVMe over Fabrics 1.0 implementations. Suggested-by: Idan Burstein <[email protected]> Signed-off-by: Max Gurtovoy <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Signed-off-by: Keith Busch <[email protected]>
2018-02-28objtool: Fix another switch table detection issueJosh Poimboeuf1-1/+5
Continue the switch table detection whack-a-mole. Add a check to distinguish KASAN data reads from switch data reads. The switch jump tables in .rodata have relocations associated with them. This fixes the following warning: crypto/asymmetric_keys/x509_cert_parser.o: warning: objtool: x509_note_pkey_algo()+0xa4: sibling call from callable instruction with modified stack frame Reported-by: Arnd Bergmann <[email protected]> Signed-off-by: Josh Poimboeuf <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Tested-by: Arnd Bergmann <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: https://lkml.kernel.org/r/d7c8853022ad47d158cb81e953a40469fc08a95e.1519784382.git.jpoimboe@redhat.com
2018-02-28x86/xen: Zero MSR_IA32_SPEC_CTRL before suspendJuergen Gross1-0/+16
Older Xen versions (4.5 and before) might have problems migrating pv guests with MSR_IA32_SPEC_CTRL having a non-zero value. So before suspending zero that MSR and restore it after being resumed. Signed-off-by: Juergen Gross <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Reviewed-by: Jan Beulich <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Link: https://lkml.kernel.org/r/[email protected]
2018-02-28x86/asm: Add instruction suffixes to bitopsJan Beulich2-14/+17
Omitting suffixes from instructions in AT&T mode is bad practice when operand size cannot be determined by the assembler from register operands, and is likely going to be warned about by upstream gas in the future (mine does already). Add the missing suffixes here. Note that for 64-bit this means some operations change from being 32-bit to 64-bit. Signed-off-by: Jan Beulich <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2018-02-28x86/entry/64: Add instruction suffixJan Beulich1-1/+1
Omitting suffixes from instructions in AT&T mode is bad practice when operand size cannot be determined by the assembler from register operands, and is likely going to be warned about by upstream gas in the future (mine does already). Add the single missing suffix here. Signed-off-by: Jan Beulich <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2018-02-28x86/refcounts: Switch to UD2 for exceptionsKees Cook1-1/+1
As done in commit 3b3a371cc9bc ("x86/debug: Use UD2 for WARN()"), this switches to UD2 from UD0 to keep disassembly readable. Signed-off-by: Kees Cook <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: https://lkml.kernel.org/r/20180225165056.GA11719@beast
2018-02-28clocksource/drivers/arc_timer: Update some commentsVineet Gupta1-3/+8
TIMER0 interrupt ACK is different for ARC700 and HS3x cores. This came to light in some internal discussions and it is nice to have this documented rather than digging up the PRM (Programmers Reference Manual). Signed-off-by: Vineet Gupta <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Cc: Daniel Lezcano <[email protected]> Cc: Vineet Gupta <[email protected]> Cc: [email protected] Link: https://lkml.kernel.org/r/[email protected]
2018-02-28clocksource/drivers/mips-gic-timer: Use correct shift count to extract dataFelix Fietkau1-1/+1
__gic_clocksource_init() extracts the GIC_CONFIG_COUNTBITS field from read_gic_config() by right shifting the register value. The shift count is determined by the most significant bit (__fls) of the bitmask which is wrong as it shifts out the complete bitfield. Use the least significant bit (__ffs) instead to shift the bitfield down to bit 0. Fixes: e07127a077c7 ("clocksource: mips-gic-timer: Use new GIC accessor functions") Signed-off-by: Felix Fietkau <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Cc: [email protected] Cc: [email protected] Link: https://lkml.kernel.org/r/[email protected]
2018-02-28nvme-multipath: fix sysfs dangerously created linksBaegjae Sung2-14/+13
If multipathing is enabled, each NVMe subsystem creates a head namespace (e.g., nvme0n1) and multiple private namespaces (e.g., nvme0c0n1 and nvme0c1n1) in sysfs. When creating links for private namespaces, links of head namespace are used, so the namespace creation order must be followed (e.g., nvme0n1 -> nvme0c1n1). If the order is not followed, links of sysfs will be incomplete or kernel panic will occur. The kernel panic was: kernel BUG at fs/sysfs/symlink.c:27! Call Trace: nvme_mpath_add_disk_links+0x5d/0x80 [nvme_core] nvme_validate_ns+0x5c2/0x850 [nvme_core] nvme_scan_work+0x1af/0x2d0 [nvme_core] Correct order Context A Context B nvme0n1 nvme0c0n1 nvme0c1n1 Incorrect order Context A Context B nvme0c1n1 nvme0n1 nvme0c0n1 The nvme_mpath_add_disk (for creating head namespace) is called just before the nvme_mpath_add_disk_links (for creating private namespaces). In nvme_mpath_add_disk, the first context acquires the lock of subsystem and creates a head namespace, and other contexts do nothing by checking GENHD_FL_UP of a head namespace after waiting to acquire the lock. We verified the code with or without multipathing using three vendors of dual-port NVMe SSDs. Signed-off-by: Baegjae Sung <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Signed-off-by: Keith Busch <[email protected]>
2018-02-28dt-bindings: at24: sort manufacturers alphabeticallyPeter Rosin1-1/+1
Makes them easier to find. Signed-off-by: Peter Rosin <[email protected]> Acked-by: Rob Herring <[email protected]> Signed-off-by: Bartosz Golaszewski <[email protected]>
2018-02-28ALSA: x86: Fix potential crash at error pathTakashi Iwai1-10/+17
When LPE audio driver gets some error at probing, it may lead to a crash because of canceling the pending work in hdmi_lpe_audio_free(), since some of ports might be still not initialized. For assuring the proper free of each port, initialize all ports at the beginning of the probe. Fixes: b4eb0d522fcb ("ALSA: x86: Split snd_intelhad into card and PCM specific structures") Signed-off-by: Takashi Iwai <[email protected]>
2018-02-28ALSA: x86: Fix missing spinlock and mutex initializationsTakashi Iwai1-0/+2
The commit change for supporting the multiple ports moved involved some code shuffling, and there the initializations of spinlock and mutex in snd_intelhad object were dropped mistakenly. This patch adds the missing initializations again for each port. Fixes: b4eb0d522fcb ("ALSA: x86: Split snd_intelhad into card and PCM specific structures") Cc: <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2018-02-28ALSA: control: Fix memory corruption risk in snd_ctl_elem_readRichard Fitzgerald1-1/+1
The patch "ALSA: control: code refactoring for ELEM_READ/ELEM_WRITE operations" introduced a potential for kernel memory corruption due to an incorrect if statement allowing non-readable controls to fall through and call the get function. For TLV controls a driver can omit SNDRV_CTL_ELEM_ACCESS_READ to ensure that only the TLV get function can be called. Instead the normal get() can be invoked unexpectedly and as the driver expects that this will only be called for controls <= 512 bytes, potentially try to copy >512 bytes into the 512 byte return array, so corrupting kernel memory. The problem is an attempt to refactor the snd_ctl_elem_read function to invert the logic so that it conditionally aborted if the control is unreadable instead of conditionally executing. But the if statement wasn't inverted correctly. The correct inversion of if (a && !b) is if (!a || b) Fixes: becf9e5d553c2 ("ALSA: control: code refactoring for ELEM_READ/ELEM_WRITE operations") Signed-off-by: Richard Fitzgerald <[email protected]> Cc: <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2018-02-28Merge branch 'drm-fixes-4.16' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie8-25/+24
into drm-fixes - Powerplay fixes for cards with no displays attached - Couple of DC fixes - radeon workaround for PPC64 * 'drm-fixes-4.16' of git://people.freedesktop.org/~agd5f/linux: drm/radeon: insist on 32-bit DMA for Cedar on PPC64/PPC64LE drm/amd/display: VGA black screen from s3 when attached to hook drm/amdgpu: Unify the dm resume calls into one drm/amdgpu: Add a missing lock for drm_mm_takedown Revert "drm/radeon/pm: autoswitch power state when in balanced mode" drm/amd/powerplay/smu7: allow mclk switching with no displays drm/amd/powerplay/vega10: allow mclk switching with no displays
2018-02-27ARM: dts: bcm283x: Move arm-pmu out of soc nodeStefan Wahren2-8/+8
The ARM PMU doesn't have a reg address, so fix the following DTC warning (requires W=1): Node /soc/arm-pmu missing or empty reg/ranges property Signed-off-by: Stefan Wahren <[email protected]> Reviewed-by: Eric Anholt <[email protected]> Signed-off-by: Florian Fainelli <[email protected]>
2018-02-27ARM: dts: bcm283x: Fix unit address of local_intcStefan Wahren2-2/+2
This patch fixes the following DTC warning (requires W=1): Node /soc/local_intc simple-bus unit address format error, expected "40000000" Signed-off-by: Stefan Wahren <[email protected]> Reviewed-by: Eric Anholt <[email protected]> Signed-off-by: Florian Fainelli <[email protected]>
2018-02-27ARM: dts: NSP: Fix amount of RAM on BCM958625HRFlorian Fainelli1-1/+1
Jon attempted to fix the amount of RAM on the BCM958625HR in commit c53beb47f621 ("ARM: dts: NSP: Correct RAM amount for BCM958625HR board") but it seems like we tripped over some poorly documented schematics. The top-level page of the schematics says the board has 2GB, but when you end-up scrolling to page 6, you see two chips of 4GBit (512MB) but what the bootloader really initializes only 512MB, any attempt to use more than that results in data aborts. Fix this again back to 512MB. Fixes: c53beb47f621 ("ARM: dts: NSP: Correct RAM amount for BCM958625HR board") Acked-by: Jon Mason <[email protected]> Signed-off-by: Florian Fainelli <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.