aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2023-11-24net: rswitch: Fix missing dev_kfree_skb_any() in error pathYoshihiro Shimoda1-8/+12
Before returning the rswitch_start_xmit() in the error path, dev_kfree_skb_any() should be called. So, fix it. Fixes: 33f5d733b589 ("net: renesas: rswitch: Improve TX timestamp accuracy") Signed-off-by: Yoshihiro Shimoda <[email protected]> Reviewed-by: Wojciech Drewek <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-11-24net: rswitch: Fix return value in rswitch_start_xmit()Yoshihiro Shimoda1-1/+1
This .ndo_start_xmit() function should return netdev_tx_t value, not -ENOMEM. So, fix it. Fixes: 33f5d733b589 ("net: renesas: rswitch: Improve TX timestamp accuracy") Signed-off-by: Yoshihiro Shimoda <[email protected]> Reviewed-by: Wojciech Drewek <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-11-24net: rswitch: Fix type of ret in rswitch_start_xmit()Yoshihiro Shimoda1-1/+1
The type of ret in rswitch_start_xmit() should be netdev_tx_t. So, fix it. Fixes: 3590918b5d07 ("net: ethernet: renesas: Add support for "Ethernet Switch"") Signed-off-by: Yoshihiro Shimoda <[email protected]> Reviewed-by: Wojciech Drewek <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-11-23Merge tag 'ata-6.7-rc3' of ↵Linus Torvalds1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata Pull ata fix from Damien Le Moal: - Add a missing error check in the adapter initialization of the pata_isapnp driver (Chen) * tag 'ata-6.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: ata: pata_isapnp: Add missing error check for devm_ioport_map()
2023-11-23Merge tag 'block-6.7-2023-11-23' of git://git.kernel.dk/linuxLinus Torvalds25-148/+210
Pull block fixes from Jens Axboe: "A bit bigger than usual at this time, but nothing really earth shattering: - NVMe pull request via Keith: - TCP TLS fixes (Hannes) - Authentifaction fixes (Mark, Hannes) - Properly terminate target names (Christoph) - MD pull request via Song, fixing a raid5 corruption issue - Disentanglement of the dependency mess in nvme introduced with the tls additions. Now it should actually build on all configs (Arnd) - Series of bcache fixes (Coly) - Removal of a dead helper (Damien) - s390 dasd fix (Muhammad, Jan) - lockdep blk-cgroup fixes (Ming)" * tag 'block-6.7-2023-11-23' of git://git.kernel.dk/linux: (33 commits) nvme: tcp: fix compile-time checks for TLS mode nvme: target: fix Kconfig select statements nvme: target: fix nvme_keyring_id() references nvme: move nvme_stop_keep_alive() back to original position nbd: pass nbd_sock to nbd_read_reply() instead of index s390/dasd: protect device queue against concurrent access s390/dasd: resolve spelling mistake block/null_blk: Fix double blk_mq_start_request() warning nvmet-tcp: always initialize tls_handshake_tmo_work nvmet: nul-terminate the NQNs passed in the connect command nvme: blank out authentication fabrics options if not configured nvme: catch errors from nvme_configure_metadata() nvme-tcp: only evaluate 'tls' option if TLS is selected nvme-auth: set explanation code for failure2 msgs nvme-auth: unlock mutex in one place only block: Remove blk_set_runtime_active() nbd: fix null-ptr-dereference while accessing 'nbd->config' nbd: factor out a helper to get nbd_config without holding 'config_lock' nbd: fold nbd config initialization into nbd_alloc_config() bcache: avoid NULL checking to c->root in run_cache_set() ...
2023-11-23Merge tag 'io_uring-6.7-2023-11-23' of git://git.kernel.dk/linuxLinus Torvalds2-2/+2
Pull io_uring fixes from Jens Axboe: "A fix for ensuring that LINKAT always propagates flags correctly, and a fix for an off-by-one in segment skipping for registered buffers. Both heading to stable as well" * tag 'io_uring-6.7-2023-11-23' of git://git.kernel.dk/linux: io_uring: fix off-by one bvec index io_uring/fs: consider link->flags when getting path for LINKAT
2023-11-23Merge tag 'for-linus-2023112301' of ↵Linus Torvalds11-22/+74
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid Pull HID fixes from Jiri Kosina: - revert of commit that caused regression to many Logitech unifying receiver users (Jiri Kosina) - power management fix for hid-mcp2221 (Hamish Martin) - fix for race condition between HID core and HID debug (Charles Yi) - a couple of assorted device-ID-specific quirks * tag 'for-linus-2023112301' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: HID: multitouch: Add quirk for HONOR GLO-GXXX touchpad HID: hid-asus: reset the backlight brightness level on resume HID: hid-asus: add const to read-only outgoing usb buffer Revert "HID: logitech-dj: Add support for a new lightspeed receiver iteration" HID: add ALWAYS_POLL quirk for Apple kb HID: glorious: fix Glorious Model I HID report HID: fix HID device resource race between HID core and debugging support HID: apple: add Jamesdonkey and A3R to non-apple keyboards list HID: mcp2221: Allow IO to start during probe HID: mcp2221: Set driver data before I2C adapter add
2023-11-24Merge tag 'drm-intel-fixes-2023-11-23' of ↵Dave Airlie3-22/+9
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes drm/i915 fixes for v6.7-rc3: - Fix race between DP MST connectore registration and setup - Fix GT memory leak on probe error path Signed-off-by: Dave Airlie <[email protected]> From: Jani Nikula <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-11-24Merge tag 'drm-misc-fixes-2023-11-23' of ↵Dave Airlie7-46/+113
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes Fixes for v6.7-rc3: - Panel fixes for innolux and auo,b101uan08.3 panel. - Fix ivpu MMIO reset. - AST fix on connetor disconnection. - nouveau gsp fix. - rockchip color fix. - Fix Himax83102-j02 timings. Signed-off-by: Dave Airlie <[email protected]> From: Maarten Lankhorst <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-11-24Merge tag 'drm-msm-fixes-2023-11-21' of ↵Dave Airlie6-10/+16
https://gitlab.freedesktop.org/drm/msm into drm-fixes Fixes for v6.7-rc3: - Fix the VREG_CTRL_1 for 4nm CPHY to match downstream - Remove duplicate call to drm_kms_helper_poll_init() in msm_drm_init() - Fix the safe_lut_tbl[] for sc8280xp to match downstream - Don't attach the drm_dp_set_subconnector_property() for eDP - Fix to attach drm_dp_set_subconnector_property() for DP. Otherwise there is a bootup crash on multiple targets - Remove unnecessary NULL check left behind during cleanup Signed-off-by: Dave Airlie <[email protected]> From: Rob Clark <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGtkna3P3mvaF53n2ARJACaXQU+OFfShayTrsUVmqCOmNQ@mail.gmail.com
2023-11-23btrfs: make error messages more clear when getting a chunk mapFilipe Manana1-3/+4
When getting a chunk map, at btrfs_get_chunk_map(), we do some sanity checks to verify we found a chunk map and that map found covers the logical address the caller passed in. However the messages aren't very clear in the sense that don't mention the issue is with a chunk map and one of them prints the 'length' argument as if it were the end offset of the requested range (while the in the string format we use %llu-%llu which suggests a range, and the second %llu-%llu is actually a range for the chunk map). So improve these two details in the error messages. CC: [email protected] # 5.4+ Reviewed-by: Josef Bacik <[email protected]> Signed-off-by: Filipe Manana <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]>
2023-11-23btrfs: fix off-by-one when checking chunk map includes logical addressFilipe Manana1-1/+1
At btrfs_get_chunk_map() we get the extent map for the chunk that contains the given logical address stored in the 'logical' argument. Then we do sanity checks to verify the extent map contains the logical address. One of these checks verifies if the extent map covers a range with an end offset behind the target logical address - however this check has an off-by-one error since it will consider an extent map whose start offset plus its length matches the target logical address as inclusive, while the fact is that the last byte it covers is behind the target logical address (by 1). So fix this condition by using '<=' rather than '<' when comparing the extent map's "start + length" against the target logical address. CC: [email protected] # 4.14+ Reviewed-by: Josef Bacik <[email protected]> Signed-off-by: Filipe Manana <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]>
2023-11-23btrfs: ref-verify: fix memory leaks in btrfs_ref_tree_mod()Bragatheswaran Manickavel1-0/+2
In btrfs_ref_tree_mod(), when !parent 're' was allocated through kmalloc(). In the following code, if an error occurs, the execution will be redirected to 'out' or 'out_unlock' and the function will be exited. However, on some of the paths, 're' are not deallocated and may lead to memory leaks. For example: lookup_block_entry() for 'be' returns NULL, the out label will be invoked. During that flow ref and 'ra' are freed but not 're', which can potentially lead to a memory leak. CC: [email protected] # 5.10+ Reported-and-tested-by: [email protected] Closes: https://syzkaller.appspot.com/bug?extid=d66de4cbf532749df35f Signed-off-by: Bragatheswaran Manickavel <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]>
2023-11-23btrfs: add dmesg output for first mount and last unmount of a filesystemQu Wenruo2-1/+5
There is a feature request to add dmesg output when unmounting a btrfs. There are several alternative methods to do the same thing, but with their own problems: - Use eBPF to watch btrfs_put_super()/open_ctree() Not end user friendly, they have to dip their head into the source code. - Watch for directory /sys/fs/<uuid>/ This is way more simple, but still requires some simple device -> uuid lookups. And a script needs to use inotify to watch /sys/fs/. Compared to all these, directly outputting the information into dmesg would be the most simple one, with both device and UUID included. And since we're here, also add the output when mounting a filesystem for the first time for parity. A more fine grained monitoring of subvolume mounts should be done by another layer, like audit. Now mounting a btrfs with all default mkfs options would look like this: [81.906566] BTRFS info (device dm-8): first mount of filesystem 633b5c16-afe3-4b79-b195-138fe145e4f2 [81.907494] BTRFS info (device dm-8): using crc32c (crc32c-intel) checksum algorithm [81.908258] BTRFS info (device dm-8): using free space tree [81.912644] BTRFS info (device dm-8): auto enabling async discard [81.913277] BTRFS info (device dm-8): checking UUID tree [91.668256] BTRFS info (device dm-8): last unmount of filesystem 633b5c16-afe3-4b79-b195-138fe145e4f2 CC: [email protected] # 5.4+ Link: https://github.com/kdave/btrfs-progs/issues/689 Reviewed-by: Anand Jain <[email protected]> Signed-off-by: Qu Wenruo <[email protected]> Reviewed-by: David Sterba <[email protected]> [ update changelog ] Signed-off-by: David Sterba <[email protected]>
2023-11-23netdevsim: Don't accept device bound programsStanislav Fomichev1-2/+2
Commit 2b3486bc2d23 ("bpf: Introduce device-bound XDP programs") introduced device-bound programs by largely reusing existing offloading infrastructure. This changed the semantics of 'prog->aux->offload' a bit. Now, it's non-NULL for both offloaded and device-bound programs. Instead of looking at 'prog->aux->offload' let's call bpf_prog_is_offloaded which should be true iff the program is offloaded and not merely device-bound. Fixes: 2b3486bc2d23 ("bpf: Introduce device-bound XDP programs") Reported-by: [email protected] Signed-off-by: Stanislav Fomichev <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Reviewed-by: Jakub Kicinski <[email protected]> Cc: Dipendra Khadka <[email protected]> Link: https://lore.kernel.org/bpf/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2023-11-23arm64: add dependency between vmlinuz.efi and ImageMasahiro Yamada1-1/+1
A common issue in Makefile is a race in parallel building. You need to be careful to prevent multiple threads from writing to the same file simultaneously. Commit 3939f3345050 ("ARM: 8418/1: add boot image dependencies to not generate invalid images") addressed such a bad scenario. A similar symptom occurs with the following command: $ make -j$(nproc) ARCH=arm64 Image vmlinuz.efi [ snip ] SORTTAB vmlinux OBJCOPY arch/arm64/boot/Image OBJCOPY arch/arm64/boot/Image AS arch/arm64/boot/zboot-header.o PAD arch/arm64/boot/vmlinux.bin GZIP arch/arm64/boot/vmlinuz OBJCOPY arch/arm64/boot/vmlinuz.o LD arch/arm64/boot/vmlinuz.efi.elf OBJCOPY arch/arm64/boot/vmlinuz.efi The log "OBJCOPY arch/arm64/boot/Image" is displayed twice. It indicates that two threads simultaneously enter arch/arm64/boot/ and write to arch/arm64/boot/Image. It occasionally leads to a build failure: $ make -j$(nproc) ARCH=arm64 Image vmlinuz.efi [ snip ] SORTTAB vmlinux OBJCOPY arch/arm64/boot/Image PAD arch/arm64/boot/vmlinux.bin truncate: Invalid number: 'arch/arm64/boot/vmlinux.bin' make[2]: *** [drivers/firmware/efi/libstub/Makefile.zboot:13: arch/arm64/boot/vmlinux.bin] Error 1 make[2]: *** Deleting file 'arch/arm64/boot/vmlinux.bin' make[1]: *** [arch/arm64/Makefile:163: vmlinuz.efi] Error 2 make[1]: *** Waiting for unfinished jobs.... make: *** [Makefile:234: __sub-make] Error 2 vmlinuz.efi depends on Image, but such a dependency is not specified in arch/arm64/Makefile. Signed-off-by: Masahiro Yamada <[email protected]> Acked-by: Ard Biesheuvel <[email protected]> Reviewed-by: SImon Glass <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Catalin Marinas <[email protected]>
2023-11-23Merge tag 'net-6.7-rc3' of ↵Linus Torvalds72-667/+1429
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from bpf. Current release - regressions: - Revert "net: r8169: Disable multicast filter for RTL8168H and RTL8107E" - kselftest: rtnetlink: fix ip route command typo Current release - new code bugs: - s390/ism: make sure ism driver implies smc protocol in kconfig - two build fixes for tools/net Previous releases - regressions: - rxrpc: couple of ACK/PING/RTT handling fixes Previous releases - always broken: - bpf: verify bpf_loop() callbacks as if they are called unknown number of times - improve stability of auto-bonding with Hyper-V - account BPF-neigh-redirected traffic in interface statistics Misc: - net: fill in some more MODULE_DESCRIPTION()s" * tag 'net-6.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (58 commits) tools: ynl: fix duplicate op name in devlink tools: ynl: fix header path for nfsd net: ipa: fix one GSI register field width tls: fix NULL deref on tls_sw_splice_eof() with empty record net: axienet: Fix check for partial TX checksum vsock/test: fix SEQPACKET message bounds test i40e: Fix adding unsupported cloud filters ice: restore timestamp configuration after device reset ice: unify logic for programming PFINT_TSYN_MSK ice: remove ptp_tx ring parameter flag amd-xgbe: propagate the correct speed and duplex status amd-xgbe: handle the corner-case during tx completion amd-xgbe: handle corner-case during sfp hotplug net: veth: fix ethtool stats reporting octeontx2-pf: Fix ntuple rule creation to direct packet to VF with higher Rx queue than its PF net: usb: qmi_wwan: claim interface 4 for ZTE MF290 Revert "net: r8169: Disable multicast filter for RTL8168H and RTL8107E" net/smc: avoid data corruption caused by decline nfc: virtual_ncidev: Add variable to check if ndev is running dpll: Fix potential msg memleak when genlmsg_put_reply failed ...
2023-11-23smb: client: introduce cifs_sfu_make_node()Paulo Alcantara3-120/+52
Remove duplicate code and add new helper for creating special files in SFU (Services for UNIX) format that can be shared by SMB1+ code. Signed-off-by: Paulo Alcantara (SUSE) <[email protected]> Signed-off-by: Steve French <[email protected]>
2023-11-23smb: client: set correct file type from NFS reparse pointsPaulo Alcantara8-61/+116
Handle all file types in NFS reparse points as specified in MS-FSCC 2.1.2.6 Network File System (NFS) Reparse Data Buffer. The client is now able to set all file types based on the parsed NFS reparse point, which used to support only symlinks. This works for SMB1+. Before patch: $ mount.cifs //srv/share /mnt -o ... $ ls -l /mnt ls: cannot access 'block': Operation not supported ls: cannot access 'char': Operation not supported ls: cannot access 'fifo': Operation not supported ls: cannot access 'sock': Operation not supported total 1 l????????? ? ? ? ? ? block l????????? ? ? ? ? ? char -rwxr-xr-x 1 root root 5 Nov 18 23:22 f0 l????????? ? ? ? ? ? fifo l--------- 1 root root 0 Nov 18 23:23 link -> f0 l????????? ? ? ? ? ? sock After patch: $ mount.cifs //srv/share /mnt -o ... $ ls -l /mnt total 1 brwxr-xr-x 1 root root 123, 123 Nov 18 00:34 block crwxr-xr-x 1 root root 1234, 1234 Nov 18 00:33 char -rwxr-xr-x 1 root root 5 Nov 18 23:22 f0 prwxr-xr-x 1 root root 0 Nov 18 23:23 fifo lrwxr-xr-x 1 root root 0 Nov 18 23:23 link -> f0 srwxr-xr-x 1 root root 0 Nov 19 2023 sock Signed-off-by: Paulo Alcantara (SUSE) <[email protected]> Signed-off-by: Steve French <[email protected]>
2023-11-23smb: client: introduce ->parse_reparse_point()Paulo Alcantara4-42/+56
Parse reparse point into cifs_open_info_data structure and feed it through cifs_open_info_to_fattr(). Signed-off-by: Paulo Alcantara (SUSE) <[email protected]> Signed-off-by: Steve French <[email protected]>
2023-11-23smb: client: implement ->query_reparse_point() for SMB1Paulo Alcantara5-175/+113
Reparse points are not limited to symlinks, so implement ->query_reparse_point() in order to handle different file types. Signed-off-by: Paulo Alcantara (SUSE) <[email protected]> Signed-off-by: Steve French <[email protected]>
2023-11-23cifs: fix use after free for iface while disabling secondary channelsRitvik Budhiraja1-1/+1
We were deferencing iface after it has been released. Fix is to release after all dereference instances have been encountered. Signed-off-by: Ritvik Budhiraja <[email protected]> Reported-by: kernel test robot <[email protected]> Reported-by: Dan Carpenter <[email protected]> Closes: https://lore.kernel.org/r/[email protected]/ Signed-off-by: Steve French <[email protected]>
2023-11-23USB: serial: option: add Luat Air72*U series productsAsuna Yang1-0/+3
Update the USB serial option driver support for Luat Air72*U series products. ID 1782:4e00 Spreadtrum Communications Inc. UNISOC-8910 T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 13 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1782 ProdID=4e00 Rev=00.00 S: Manufacturer=UNISOC S: Product=UNISOC-8910 C: #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=400mA I: If#= 0 Alt= 0 #EPs= 1 Cls=e0(wlcon) Sub=01 Prot=03 Driver=rndis_host E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=4096ms I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms If#= 2: AT If#= 3: PPP + AT If#= 4: Debug Co-developed-by: Yangyu Chen <[email protected]> Signed-off-by: Yangyu Chen <[email protected]> Signed-off-by: Asuna Yang <[email protected]> Cc: [email protected] Signed-off-by: Johan Hovold <[email protected]>
2023-11-23mmc: sdhci-sprd: Fix vqmmc not shutting down after the card was pulledWenchao Chen1-0/+25
With cat regulator_summary, we found that vqmmc was not shutting down after the card was pulled. cat /sys/kernel/debug/regulator/regulator_summary 1.before fix 1)Insert SD card vddsdio 1 1 0 unknown 3500mV 0mA 1200mV 3750mV 71100000.mmc-vqmmc 1 0mA 3500mV 3600mV 2)Pull out the SD card vddsdio 1 1 0 unknown 3500mV 0mA 1200mV 3750mV 71100000.mmc-vqmmc 1 0mA 3500mV 3600mV 2.after fix 1)Insert SD cardt vddsdio 1 1 0 unknown 3500mV 0mA 1200mV 3750mV 71100000.mmc-vqmmc 1 0mA 3500mV 3600mV 2)Pull out the SD card vddsdio 0 1 0 unknown 3500mV 0mA 1200mV 3750mV 71100000.mmc-vqmmc 0 0mA 3500mV 3600mV Fixes: fb8bd90f83c4 ("mmc: sdhci-sprd: Add Spreadtrum's initial host controller") Signed-off-by: Wenchao Chen <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Ulf Hansson <[email protected]>
2023-11-23mmc: sdhci-pci-gli: Disable LPM during initializationKornel Dulęba1-25/+29
To address IO performance commit f9e5b33934ce ("mmc: host: Improve I/O read/write performance for GL9763E") limited LPM negotiation to runtime suspend state. The problem is that it only flips the switch in the runtime PM resume/suspend logic. Disable LPM negotiation in gl9763e_add_host. This helps in two ways: 1. It was found that the LPM switch stays in the same position after warm reboot. Having it set in init helps with consistency. 2. Disabling LPM during the first runtime resume leaves us susceptible to the performance issue in the time window between boot and the first runtime suspend. Fixes: f9e5b33934ce ("mmc: host: Improve I/O read/write performance for GL9763E") Cc: [email protected] Signed-off-by: Kornel Dulęba <[email protected]> Reviewed-by: Sven van Ashbrook <[email protected]> Acked-by: Adrian Hunter <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Ulf Hansson <[email protected]>
2023-11-23tools: ynl: fix duplicate op name in devlinkJakub Kicinski2-1/+7
We don't support CRUD-inspired message types in YNL too well. One aspect that currently trips us up is the fact that single message ID can be used in multiple commands (as the response). This leads to duplicate entries in the id-to-string tables: devlink-user.c:19:34: warning: initialized field overwritten [-Woverride-init] 19 | [DEVLINK_CMD_PORT_NEW] = "port-new", | ^~~~~~~~~~ devlink-user.c:19:34: note: (near initialization for ‘devlink_op_strmap[7]’) Fixes tag points at where the code was generated, the "real" problem is that the code generator does not support CRUD. Fixes: f2f9dd164db0 ("netlink: specs: devlink: add the remaining command to generate complete split_ops") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-11-23tools: ynl: fix header path for nfsdJakub Kicinski1-1/+1
The makefile dependency is trying to include the wrong header: <command-line>: fatal error: ../../../../include/uapi//linux/nfsd.h: No such file or directory The guard also looks wrong. Fixes: f14122b2c2ac ("tools: ynl: Add source files for nfsd netlink protocol") Reviewed-by: Chuck Lever <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-11-23net: ipa: fix one GSI register field widthAlex Elder1-1/+1
The width of the R_LENGTH field of the EV_CH_E_CNTXT_1 GSI register is 24 bits (not 20 bits) starting with IPA v5.0. Fix this. Fixes: faf0678ec8a0 ("net: ipa: add IPA v5.0 GSI register definitions") Signed-off-by: Alex Elder <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-11-23tls: fix NULL deref on tls_sw_splice_eof() with empty recordJann Horn1-0/+3
syzkaller discovered that if tls_sw_splice_eof() is executed as part of sendfile() when the plaintext/ciphertext sk_msg are empty, the send path gets confused because the empty ciphertext buffer does not have enough space for the encryption overhead. This causes tls_push_record() to go on the `split = true` path (which is only supposed to be used when interacting with an attached BPF program), and then get further confused and hit the tls_merge_open_record() path, which then assumes that there must be at least one populated buffer element, leading to a NULL deref. It is possible to have empty plaintext/ciphertext buffers if we previously bailed from tls_sw_sendmsg_locked() via the tls_trim_both_msgs() path. tls_sw_push_pending_record() already handles this case correctly; let's do the same check in tls_sw_splice_eof(). Fixes: df720d288dbb ("tls/sw: Use splice_eof() to flush") Cc: [email protected] Reported-by: [email protected] Signed-off-by: Jann Horn <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-11-23net: axienet: Fix check for partial TX checksumSamuel Holland1-1/+1
Due to a typo, the code checked the RX checksum feature in the TX path. Fixes: 8a3b7a252dca ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver") Signed-off-by: Samuel Holland <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Reviewed-by: Radhey Shyam Pandey <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-11-23vsock/test: fix SEQPACKET message bounds testArseniy Krasnov1-6/+13
Tune message length calculation to make this test work on machines where 'getpagesize()' returns >32KB. Now maximum message length is not hardcoded (on machines above it was smaller than 'getpagesize()' return value, thus we get negative value and test fails), but calculated at runtime and always bigger than 'getpagesize()' result. Reproduced on aarch64 with 64KB page size. Fixes: 5c338112e48a ("test/vsock: rework message bounds test") Signed-off-by: Arseniy Krasnov <[email protected]> Reported-by: Bogdan Marcynkov <[email protected]> Reviewed-by: Stefano Garzarella <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-11-23i40e: Fix adding unsupported cloud filtersIvan Vecera1-7/+9
If a VF tries to add unsupported cloud filter through virtchnl then i40e_add_del_cloud_filter(_big_buf) returns -ENOTSUPP but this error code is stored in 'ret' instead of 'aq_ret' that is used as error code sent back to VF. In this scenario where one of the mentioned functions fails the value of 'aq_ret' is zero so the VF will incorrectly receive a 'success'. Use 'aq_ret' to store return value and remove 'ret' local variable. Additionally fix the issue when filter allocation fails, in this case no notification is sent back to the VF. Fixes: e284fc280473 ("i40e: Add and delete cloud filter") Reviewed-by: Simon Horman <[email protected]> Signed-off-by: Ivan Vecera <[email protected]> Tested-by: Rafal Romanowski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-11-23Merge branch 'ice-restore-timestamp-config-after-reset'Paolo Abeni5-82/+83
Tony Nguyen says: ==================== ice: restore timestamp config after reset Jake Keller says: We recently discovered during internal validation that the ice driver has not been properly restoring Tx timestamp configuration after a device reset, which resulted in application failures after a device reset. After some digging, it turned out this problem is two-fold. Since the introduction of the PTP support the driver has been clobbering the storage of the current timestamp configuration during reset. Thus after a reset, the driver will no longer perform Tx or Rx timestamps, and will report timestamp configuration as disabled if SIOCGHWTSTAMP ioctl is issued. In addition, the recently merged auxiliary bus support code missed that PFINT_TSYN_MSK must be reprogrammed on the clock owner for E822 devices. Failure to restore this register configuration results in the driver no longer responding to interrupts from other ports. Depending on the traffic pattern, this can either result in increased latency responding to timestamps on the non-owner ports, or it can result in the driver never reporting any timestamps. The configuration of PFINT_TSYN_MSK was only done during initialization. Due to this, the Tx timestamp issue persists even if userspace reconfigures timestamping. This series fixes both issues, as well as removes a redundant Tx ring field since we can rely on the skb flag as the primary detector for a Tx timestamp request. Note that I don't think this series will directly apply to older stable releases (even v6.6) as we recently refactored a lot of the PTP code to support auxiliary bus. Patch 2/3 only matters for the post-auxiliary bus implementation. The principle of patch 1/3 and 3/3 could apply as far back as the initial PTP support, but I don't think it will apply cleanly as-is. ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2023-11-23ice: restore timestamp configuration after device resetJacob Keller3-40/+51
The driver calls ice_ptp_cfg_timestamp() during ice_ptp_prepare_for_reset() to disable timestamping while the device is resetting. This operation destroys the user requested configuration. While the driver does call ice_ptp_cfg_timestamp in ice_rebuild() to restore some hardware settings after a reset, it unconditionally passes true or false, resulting in failure to restore previous user space configuration. This results in a device reset forcibly disabling timestamp configuration regardless of current user settings. This was not detected previously due to a quirk of the LinuxPTP ptp4l application. If ptp4l detects a missing timestamp, it enters a fault state and performs recovery logic which includes executing SIOCSHWTSTAMP again, restoring the now accidentally cleared configuration. Not every application does this, and for these applications, timestamps will mysteriously stop after a PF reset, without being restored until an application restart. Fix this by replacing ice_ptp_cfg_timestamp() with two new functions: 1) ice_ptp_disable_timestamp_mode() which unconditionally disables the timestamping logic in ice_ptp_prepare_for_reset() and ice_ptp_release() 2) ice_ptp_restore_timestamp_mode() which calls ice_ptp_restore_tx_interrupt() to restore Tx timestamping configuration, calls ice_set_rx_tstamp() to restore Rx timestamping configuration, and issues an immediate TSYN_TX interrupt to ensure that timestamps which may have occurred during the device reset get processed. Modify the ice_ptp_set_timestamp_mode to directly save the user configuration and then call ice_ptp_restore_timestamp_mode. This way, reset no longer destroys the saved user configuration. This obsoletes the ice_set_tx_tstamp() function which can now be safely removed. With this change, all devices should now restore Tx and Rx timestamping functionality correctly after a PF reset without application intervention. Fixes: 77a781155a65 ("ice: enable receive hardware timestamping") Fixes: ea9b847cda64 ("ice: enable transmit timestamps for E810 devices") Signed-off-by: Jacob Keller <[email protected]> Reviewed-by: Jesse Brandeburg <[email protected]> Reviewed-by: Simon Horman <[email protected]> Tested-by: Pucha Himasekhar Reddy <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]> Signed-off-by: Paolo Abeni <[email protected]>
2023-11-23ice: unify logic for programming PFINT_TSYN_MSKJacob Keller1-26/+34
Commit d938a8cca88a ("ice: Auxbus devices & driver for E822 TS") modified how Tx timestamps are handled for E822 devices. On these devices, only the clock owner handles reading the Tx timestamp data from firmware. To do this, the PFINT_TSYN_MSK register is modified from the default value to one which enables reacting to a Tx timestamp on all PHY ports. The driver currently programs PFINT_TSYN_MSK in different places depending on whether the port is the clock owner or not. For the clock owner, the PFINT_TSYN_MSK value is programmed during ice_ptp_init_owner just before calling ice_ptp_tx_ena_intr to program the PHY ports. For the non-clock owner ports, the PFINT_TSYN_MSK is programmed during ice_ptp_init_port. If a large enough device reset occurs, the PFINT_TSYN_MSK register will be reset to the default value in which only the PHY associated directly with the PF will cause the Tx timestamp interrupt to trigger. The driver lacks logic to reprogram the PFINT_TSYN_MSK register after a device reset. For the E822 device, this results in the PF no longer responding to interrupts for other ports. This results in failure to deliver Tx timestamps to user space applications. Rename ice_ptp_configure_tx_tstamp to ice_ptp_cfg_tx_interrupt, and unify the logic for programming PFINT_TSYN_MSK and PFINT_OICR_ENA into one place. This function will program both registers according to the combination of user configuration and device requirements. This ensures that PFINT_TSYN_MSK is always restored when we configure the Tx timestamp interrupt. Fixes: d938a8cca88a ("ice: Auxbus devices & driver for E822 TS") Signed-off-by: Jacob Keller <[email protected]> Reviewed-by: Jesse Brandeburg <[email protected]> Reviewed-by: Simon Horman <[email protected]> Tested-by: Pucha Himasekhar Reddy <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]> Signed-off-by: Paolo Abeni <[email protected]>
2023-11-23ice: remove ptp_tx ring parameter flagJacob Keller3-18/+0
Before performing a Tx timestamp in ice_stamp(), the driver checks a ptp_tx ring variable to see if timestamping is enabled on that ring. This value is set for all rings whenever userspace configures Tx timestamping. Ostensibly this was done to avoid wasting cycles checking other fields when timestamping has not been enabled. However, for Tx timestamps we already get an individual per-SKB flag indicating whether userspace wants to request a timestamp on that packet. We do not gain much by also having a separate flag to check for whether timestamping was enabled. In fact, the driver currently fails to restore the field after a PF reset. Because of this, if a PF reset occurs, timestamps will be disabled. Since this flag doesn't add value in the hotpath, remove it and always provide a timestamp if the SKB flag has been set. A following change will fix the reset path to properly restore user timestamping configuration completely. This went unnoticed for some time because one of the most common applications using Tx timestamps, ptp4l, will reconfigure the socket as part of its fault recovery logic. Fixes: ea9b847cda64 ("ice: enable transmit timestamps for E810 devices") Signed-off-by: Jacob Keller <[email protected]> Reviewed-by: Jesse Brandeburg <[email protected]> Reviewed-by: Simon Horman <[email protected]> Tested-by: Pucha Himasekhar Reddy <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]> Signed-off-by: Paolo Abeni <[email protected]>
2023-11-23kselftest/arm64: Fix output formatting for za-forkMark Brown1-1/+1
The za-fork test does not output a newline when reporting the result of the one test it runs, causing the counts printed by kselftest to be included in the test name. Add the newline. Fixes: 266679ffd867 ("kselftest/arm64: Convert za-fork to use kselftest.h") Cc: <[email protected]> # 6.4.x Signed-off-by: Mark Brown <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Catalin Marinas <[email protected]>
2023-11-23Merge branch 'amd-xgbe-fixes-to-handle-corner-cases'Paolo Abeni3-4/+35
Raju Rangoju says: ==================== amd-xgbe: fixes to handle corner-cases This series include bug fixes to amd-xgbe driver. ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2023-11-23amd-xgbe: propagate the correct speed and duplex statusRaju Rangoju1-3/+8
xgbe_get_link_ksettings() does not propagate correct speed and duplex information to ethtool during cable unplug. Due to which ethtool reports incorrect values for speed and duplex. Address this by propagating correct information. Fixes: 7c12aa08779c ("amd-xgbe: Move the PHY support into amd-xgbe") Acked-by: Shyam Sundar S K <[email protected]> Signed-off-by: Raju Rangoju <[email protected]> Reviewed-by: Wojciech Drewek <[email protected]> Signed-off-by: Paolo Abeni <[email protected]>
2023-11-23amd-xgbe: handle the corner-case during tx completionRaju Rangoju1-0/+14
The existing implementation uses software logic to accumulate tx completions until the specified time (1ms) is met and then poll them. However, there exists a tiny gap which leads to a race between resetting and checking the tx_activate flag. Due to this the tx completions are not reported to upper layer and tx queue timeout kicks-in restarting the device. To address this, introduce a tx cleanup mechanism as part of the periodic maintenance process. Fixes: c5aa9e3b8156 ("amd-xgbe: Initial AMD 10GbE platform driver") Acked-by: Shyam Sundar S K <[email protected]> Signed-off-by: Raju Rangoju <[email protected]> Reviewed-by: Wojciech Drewek <[email protected]> Signed-off-by: Paolo Abeni <[email protected]>
2023-11-23amd-xgbe: handle corner-case during sfp hotplugRaju Rangoju1-1/+13
Force the mode change for SFI in Fixed PHY configurations. Fixed PHY configurations needs PLL to be enabled while doing mode set. When the SFP module isn't connected during boot, driver assumes AN is ON and attempts auto-negotiation. However, if the connected SFP comes up in Fixed PHY configuration the link will not come up as PLL isn't enabled while the initial mode set command is issued. So, force the mode change for SFI in Fixed PHY configuration to fix link issues. Fixes: e57f7a3feaef ("amd-xgbe: Prepare for working with more than one type of phy") Acked-by: Shyam Sundar S K <[email protected]> Signed-off-by: Raju Rangoju <[email protected]> Reviewed-by: Wojciech Drewek <[email protected]> Signed-off-by: Paolo Abeni <[email protected]>
2023-11-23platform/x86: asus-wmi: Filter Volume key presses if also reported via atkbdHans de Goede1-0/+23
Use the i8042-filter to check if Volume key presses are also reported via atkbd and if yes then filter out the WMI events to avoid reporting each key-press twice. Note depending on in which order the PS/2 data vs the WMI event are handled the first volume key press may still be reported twice. This is a compromise versus DMI quirks (unmaintainable) or other more complex solutions. Closes: https://bbs.archlinux.org/viewtopic.php?pid=2128536#p2128536 Signed-off-by: Hans de Goede <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Ilpo Järvinen <[email protected]> Signed-off-by: Ilpo Järvinen <[email protected]>
2023-11-23platform/x86: asus-wmi: Change q500a_i8042_filter() into a generic i8042-filterHans de Goede3-19/+23
Change asus_q500a_i8042_filter() into a generic i8042-filter, using a new filter_i8042_e1_extended_codes flag in the quirks struct to decide if e1 extended codes should be filtered out or not. This is a preparation patch for adding support for filtering volume key events being reported twice through both the PS/2 keyboard and asus-wmi. Note while modifying the code also drop the unnecessary unlikely() annotations, this is not in a hot path so those are not necessary. Signed-off-by: Hans de Goede <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Ilpo Järvinen <[email protected]> Signed-off-by: Ilpo Järvinen <[email protected]>
2023-11-23platform/x86: asus-wmi: Move i8042 filter install to shared asus-wmi codeHans de Goede3-12/+9
asus-nb-wmi calls i8042_install_filter() in some cases, but it never calls i8042_remove_filter(). This means that a dangling pointer to the filter function is left after rmmod leading to crashes. Fix this by moving the i8042-filter installation to the shared asus-wmi code and also remove it from the shared code on driver unbind. Fixes: b5643539b825 ("platform/x86: asus-wmi: Filter buggy scan codes on ASUS Q500A") Cc: Oleksij Rempel <[email protected]> Signed-off-by: Hans de Goede <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Ilpo Järvinen <[email protected]> Signed-off-by: Ilpo Järvinen <[email protected]>
2023-11-23net: veth: fix ethtool stats reportingLorenzo Bianconi1-1/+1
Fix a possible misalignment between page_pool stats and tx xdp_stats reported in veth_get_ethtool_stats routine. The issue can be reproduced configuring the veth pair with the following tx/rx queues: $ip link add v0 numtxqueues 2 numrxqueues 4 type veth peer name v1 \ numtxqueues 1 numrxqueues 1 and loading a simple XDP program on v0 that just returns XDP_PASS. In this case on v0 the page_pool stats overwrites tx xdp_stats for queue 1. Fix the issue incrementing pp_idx of dev->real_num_tx_queues * VETH_TQ_STATS_LEN since we always report xdp_stats for all tx queues in ethtool. Fixes: 4fc418053ec7 ("net: veth: add page_pool stats") Signed-off-by: Lorenzo Bianconi <[email protected]> Link: https://lore.kernel.org/r/c5b5d0485016836448453f12846c7c4ab75b094a.1700593593.git.lorenzo@kernel.org Signed-off-by: Paolo Abeni <[email protected]>
2023-11-23octeontx2-pf: Fix ntuple rule creation to direct packet to VF with higher Rx ↵Suman Ghosh1-1/+19
queue than its PF It is possible to add a ntuple rule which would like to direct packet to a VF whose number of queues are greater/less than its PF's queue numbers. For example a PF can have 2 Rx queues but a VF created on that PF can have 8 Rx queues. As of today, ntuple rule will reject rule because it is checking the requested queue number against PF's number of Rx queues. As a part of this fix if the action of a ntuple rule is to move a packet to a VF's queue then the check is removed. Also, a debug information is printed to aware user that it is user's responsibility to cross check if the requested queue number on that VF is a valid one. Fixes: f0a1913f8a6f ("octeontx2-pf: Add support for ethtool ntuple filters") Signed-off-by: Suman Ghosh <[email protected]> Reviewed-by: Wojciech Drewek <[email protected]> Reviewed-by: Simon Horman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2023-11-23arm/xen: fix xen_vcpu_info allocation alignmentStefano Stabellini1-1/+2
xen_vcpu_info is a percpu area than needs to be mapped by Xen. Currently, it could cross a page boundary resulting in Xen being unable to map it: [ 0.567318] kernel BUG at arch/arm64/xen/../../arm/xen/enlighten.c:164! [ 0.574002] Internal error: Oops - BUG: 00000000f2000800 [#1] PREEMPT SMP Fix the issue by using __alloc_percpu and requesting alignment for the memory allocation. Signed-off-by: Stefano Stabellini <[email protected]> Link: https://lore.kernel.org/r/alpine.DEB.2.22.394.2311221501340.2053963@ubuntu-linux-20-04-desktop Fixes: 24d5373dda7c ("arm/xen: Use alloc_percpu rather than __alloc_percpu") Reviewed-by: Juergen Gross <[email protected]> Signed-off-by: Juergen Gross <[email protected]>
2023-11-23net: usb: qmi_wwan: claim interface 4 for ZTE MF290Lech Perczak1-0/+1
Interface 4 is used by for QMI interface in stock firmware of MF28D, the router which uses MF290 modem. Rebind it to qmi_wwan after freeing it up from option driver. The proper configuration is: Interface mapping is: 0: QCDM, 1: (unknown), 2: AT (PCUI), 2: AT (Modem), 4: QMI T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=19d2 ProdID=0189 Rev= 0.00 S: Manufacturer=ZTE, Incorporated S: Product=ZTE LTE Technologies MSM C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=84(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=86(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms Cc: Bjørn Mork <[email protected]> Signed-off-by: Lech Perczak <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2023-11-23pmdomain: qcom: rpmpd: Set GENPD_FLAG_ACTIVE_WAKEUPStephan Gerhold1-0/+1
Set GENPD_FLAG_ACTIVE_WAKEUP for all RPM power domains so that power domains necessary for wakeup/"awake path" devices are kept on across suspend. This is needed for example for the *_AO ("active-only") variants of the RPMPDs used by the CPU. Those should maintain their votes also across system suspend to ensure the CPU can keep running for the whole suspend process (ending in a firmware call). When the RPM firmware detects that the CPUs are in a deep idle state it will drop those votes automatically. Signed-off-by: Stephan Gerhold <[email protected]> Reviewed-by: Ulf Hansson <[email protected]> Signed-off-by: Viresh Kumar <[email protected]>
2023-11-23cpufreq: qcom-nvmem: Preserve PM domain votes in system suspendStephan Gerhold1-0/+27
>From the Linux point of view, the power domains used by the CPU must stay always-on. This is because we still need the CPU to keep running until the last instruction, which will typically be a firmware call that shuts down the CPU cleanly. At the moment the power domain votes (enable + performance state) are dropped during system suspend, which means the CPU could potentially malfunction while entering suspend. We need to distinguish between two different setups used with qcom-cpufreq-nvmem: 1. CPR power domain: The backing regulator used by CPR should stay always-on in Linux; it is typically disabled automatically by hardware when the CPU enters a deep idle state. However, we should pause the CPR state machine during system suspend. 2. RPMPD: The power domains used by the CPU should stay always-on in Linux (also across system suspend). The CPU typically only uses the *_AO ("active-only") variants of the power domains in RPMPD. For those, the RPM firmware will automatically drop the votes internally when the CPU enters a deep idle state. Make this work correctly by calling device_set_awake_path() on the virtual genpd devices, so that the votes are maintained across system suspend. The power domain drivers need to set GENPD_FLAG_ACTIVE_WAKEUP to opt into staying on during system suspend. For now we only set this for the RPMPD case. For CPR, not setting it will ensure the state machine is still paused during system suspend, while the backing regulator will stay on with "regulator-always-on". Signed-off-by: Stephan Gerhold <[email protected]> Reviewed-by: Ulf Hansson <[email protected]> Signed-off-by: Viresh Kumar <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.