aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2023-03-29Merge patch series "RISC-V: Fixes for riscv_has_extension[un]likely()'s ↵Palmer Dabbelt3-30/+38
alternative dependency" Conor Dooley <[email protected]> says: Here's my attempt at fixing both the use of an FPU on XIP kernels and the issue that Jason ran into where CONFIG_FPU, which needs the alternatives frame work for has_fpu() checks, could be enabled without the alternatives actually being present. For the former, a "slow" fallback that does not use alternatives is added to riscv_has_extension_[un]likely() that can be used with XIP. Obviously, we want to make use of Jisheng's alternatives based approach where possible, so any users of riscv_has_extension_[un]likely() will want to make sure that they select RISCV_ALTERNATIVE. If they don't however, they'll hit the fallback path which (should, sparing a silly mistake from me!) behave in the same way, thus succeeding silently. Sounds like a To prevent "depends on !XIP_KERNEL; select RISCV_ALTERNATIVE" spreading like the plague through the various places that want to check for the presence of extensions, and sidestep the potential silent "success" mentioned above, all users RISCV_ALTERNATIVE are converted from selects to dependencies, with the option being selected for all !XIP_KERNEL builds. I know that the VDSO was a key place that Jisheng wanted to use the new helper rather than static branches, and I think the fallback path should not cause issues there. See the thread at [1] for the prior discussion. 1 - https://lore.kernel.org/linux-riscv/[email protected]/T/#m21390d570997145d31dd8bb95002fd61f99c6573 [Palmer: merging in the fixes as a branch as there's some features that depend on it.] * b4-shazam-merge: RISC-V: always select RISCV_ALTERNATIVE for non-xip kernels RISC-V: add non-alternative fallback for riscv_has_extension_[un]likely() Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Palmer Dabbelt <[email protected]>
2023-03-29RISC-V: always select RISCV_ALTERNATIVE for non-xip kernelsConor Dooley2-10/+8
When moving switch_to's has_fpu() over to using riscv_has_extension_likely() rather than static branches, the FPU code gained a dependency on the alternatives framework. That dependency has now been removed, as riscv_has_extension_ikely() now contains a fallback path, using __riscv_isa_extension_available(), but if CONFIG_RISCV_ALTERNATIVE isn't selected when CONFIG_FPU is, has_fpu() checks will not benefit from the "fast path" that the alternatives framework provides. We want to ensure that alternatives are available whenever riscv_has_extension_[un]likely() is used, rather than silently falling back to the slow path, but rather than rely on selecting RISCV_ALTERNATIVE in the myriad of locations that may use riscv_has_extension_[un]likely(), select it (almost) always instead by adding it to the main RISCV config entry. xip kernels cannot make use of the alternatives framework, so it is not enabled for those configurations, although this is the status quo. All current sites that select RISCV_ALTERNATIVE are converted to dependencies on the option instead. The explicit dependencies on !XIP_KERNEL can be dropped, as RISCV_ALTERNATIVE is not user selectable. Fixes: 702e64550b12 ("riscv: fpu: switch has_fpu() to riscv_has_extension_likely()") Link: https://lore.kernel.org/all/[email protected]/ Reported-by: Jason A. Donenfeld <[email protected]> Signed-off-by: Conor Dooley <[email protected]> Reviewed-by: Andrew Jones <[email protected]> Reviewed-by: Jason A. Donenfeld <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Palmer Dabbelt <[email protected]>
2023-03-29RISC-V: add non-alternative fallback for riscv_has_extension_[un]likely()Conor Dooley1-20/+30
The has_fpu() check, which in turn calls riscv_has_extension_likely(), relies on alternatives to figure out whether the system has an FPU. As a result, it will malfunction on XIP kernels, as they do not support the alternatives mechanism. When alternatives support is not present, fall back to using __riscv_isa_extension_available() in riscv_has_extension_[un]likely() instead stead, which handily takes the same argument, so that kernels that do not support alternatives can accurately report the presence of FPU support. Fixes: 702e64550b12 ("riscv: fpu: switch has_fpu() to riscv_has_extension_likely()") Link: https://lore.kernel.org/all/ad445951-3d13-4644-94d9-e0989cda39c3@spud/ Signed-off-by: Conor Dooley <[email protected]> Reviewed-by: Andrew Jones <[email protected]> Reviewed-by: Jason A. Donenfeld <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Palmer Dabbelt <[email protected]>
2023-03-29thermal: intel: int340x: processor_thermal: Fix additional deadlockSrinivas Pandruvada1-1/+0
Commit 52f04f10b900 ("thermal: intel: int340x: processor_thermal: Fix deadlock") addressed deadlock issue during user space trip update. But it missed a case when thermal zone device is disabled when user writes 0. Call to thermal_zone_device_disable() also causes deadlock as it also tries to lock tz->lock, which is already claimed by trip_point_temp_store() in the thermal core code. Remove call to thermal_zone_device_disable() in the function sys_set_trip_temp(), which is called from trip_point_temp_store(). Fixes: 52f04f10b900 ("thermal: intel: int340x: processor_thermal: Fix deadlock") Signed-off-by: Srinivas Pandruvada <[email protected]> Cc: 6.2+ <[email protected]> # 6.2+ Signed-off-by: Rafael J. Wysocki <[email protected]>
2023-03-29Merge tag 'xtensa-20230327' of https://github.com/jcmvbkbc/linux-xtensaLinus Torvalds2-6/+12
Pull xtensa fixes from Max Filippov: - fix KASAN report in show_stack - drop linux-xtensa mailing list from the MAINTAINERS file * tag 'xtensa-20230327' of https://github.com/jcmvbkbc/linux-xtensa: MAINTAINERS: xtensa: drop [email protected] mailing list xtensa: fix KASAN report for show_stack
2023-03-29Merge tag 'f2fs-fix-6.3-rc5' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs Pull f2fs fix from Jaegeuk Kim: "This fixes a tracepoint field size in f2fs in preparation for stricter rules for tracing fields" * tag 'f2fs-fix-6.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: f2fs: Fix f2fs_truncate_partial_nodes ftrace event
2023-03-29io_uring/rsrc: fix rogue rsrc node grabbingPavel Begunkov1-7/+5
We should not be looking at ctx->rsrc_node and anyhow modifying the node without holding uring_lock, grabbing references in such a way is not safe either. Cc: [email protected] Fixes: 5106dd6e74ab6 ("io_uring: propagate issue_flags state down to file assignment") Signed-off-by: Pavel Begunkov <[email protected]> Link: https://lore.kernel.org/r/1202ede2d7bb90136e3482b2b84aad9ed483e5d6.1680098433.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <[email protected]>
2023-03-29drm: test: Fix 32-bit issue in drm_buddy_testDavid Gow1-1/+2
The drm_buddy_test KUnit tests verify that returned blocks have sizes which are powers of two using is_power_of_2(). However, is_power_of_2() operations on a 'long', but the block size is a u64. So on systems where long is 32-bit, this can sometimes fail even on correctly sized blocks. This only reproduces randomly, as the parameters passed to the buddy allocator in this test are random. The seed 0xb2e06022 reproduced it fine here. For now, just hardcode an is_power_of_2() implementation using x & (x - 1). Signed-off-by: David Gow <[email protected]> Acked-by: Christian König <[email protected]> Reviewed-by: Maíra Canal <[email protected]> Reviewed-by: Arunpravin Paneer Selvam <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Christian König <[email protected]>
2023-03-29drm: buddy_allocator: Fix buddy allocator init on 32-bit systemsDavid Gow1-2/+2
The drm buddy allocator tests were broken on 32-bit systems, as rounddown_pow_of_two() takes a long, and the buddy allocator handles 64-bit sizes even on 32-bit systems. This can be reproduced with the drm_buddy_allocator KUnit tests on i386: ./tools/testing/kunit/kunit.py run --arch i386 \ --kunitconfig ./drivers/gpu/drm/tests drm_buddy (It results in kernel BUG_ON() when too many blocks are created, due to the block size being too small.) This was independently uncovered (and fixed) by Luís Mendes, whose patch added a new u64 variant of rounddown_pow_of_two(). This version instead recalculates the size based on the order. Reported-by: Luís Mendes <[email protected]> Link: https://lore.kernel.org/lkml/CAEzXK1oghXAB_KpKpm=-CviDQbNaH0qfgYTSSjZgvvyj4U78AA@mail.gmail.com/T/ Signed-off-by: David Gow <[email protected]> Acked-by: Christian König <[email protected]> Reviewed-by: Arunpravin Paneer Selvam <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Christian König <[email protected]>
2023-03-29ALSA: hda/realtek: Add quirk for Lenovo ZhaoYang CF4620Zhuangwenhui1-0/+1
Fix headset microphone detection on Lenovo ZhaoYang CF4620Z. [ adjusted to be applicable to the latest tree -- tiwai ] Signed-off-by: huangwenhui <[email protected]> Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2023-03-29drm/nouveau/kms: Fix backlight registrationHans de Goede1-1/+6
The nouveau code used to call drm_fb_helper_initial_config() from nouveau_fbcon_init() before calling drm_dev_register(). This would probe all connectors so that drm_connector->status could be used during backlight registration which runs from nouveau_connector_late_register(). After commit 4a16dd9d18a0 ("drm/nouveau/kms: switch to drm fbdev helpers") the fbdev emulation code, which now is a drm-client, can only run after drm_dev_register(). So during backlight registration the connectors are not probed yet and the drm_connector->status == connected check in nv50_backlight_init() would now always fail. Replace the drm_connector->status == connected check with a drm_helper_probe_detect() == connected check to fix nv_backlight no longer getting registered because of this. Fixes: 4a16dd9d18a0 ("drm/nouveau/kms: switch to drm fbdev helpers") Link: https://gitlab.freedesktop.org/drm/nouveau/-/issues/202 Link: https://bugzilla.redhat.com/show_bug.cgi?id=2181941 Signed-off-by: Hans de Goede <[email protected]> Reviewed-by: Lyude Paul <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-03-29net: wwan: iosm: fixes 7560 modem crashM Chetan Kumar1-0/+7
ModemManger/Apps probing the wwan0xmmrpc0 port for 7560 Modem results in modem crash. 7560 Modem FW uses the MBIM interface for control command communication whereas 7360 uses Intel RPC interface so disable wwan0xmmrpc0 port for 7560. Fixes: d08b0f8f46e4 ("net: wwan: iosm: add rpc interface for xmm modems") Reported-and-tested-by: Martin <[email protected]> Link: https://bugzilla.kernel.org/show_bug.cgi?id=217200 Signed-off-by: M Chetan Kumar <[email protected]> Signed-off-by: Shane Parslow <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-03-29ALSA: ymfpci: Fix BUG_ON in probe functionTasos Sahanidis1-1/+1
The snd_dma_buffer.bytes field now contains the aligned size, which this snd_BUG_ON() did not account for, resulting in the following: [ 9.625915] ------------[ cut here ]------------ [ 9.633440] WARNING: CPU: 0 PID: 126 at sound/pci/ymfpci/ymfpci_main.c:2168 snd_ymfpci_create+0x681/0x698 [snd_ymfpci] [ 9.648926] Modules linked in: snd_ymfpci(+) snd_intel_dspcfg kvm(+) snd_intel_sdw_acpi snd_ac97_codec snd_mpu401_uart snd_opl3_lib irqbypass snd_hda_codec gameport snd_rawmidi crct10dif_pclmul crc32_pclmul cfg80211 snd_hda_core polyval_clmulni polyval_generic gf128mul snd_seq_device ghash_clmulni_intel snd_hwdep ac97_bus sha512_ssse3 rfkill snd_pcm aesni_intel tg3 snd_timer crypto_simd snd mxm_wmi libphy cryptd k10temp fam15h_power pcspkr soundcore sp5100_tco wmi acpi_cpufreq mac_hid dm_multipath sg loop fuse dm_mod bpf_preload ip_tables x_tables ext4 crc32c_generic crc16 mbcache jbd2 sr_mod cdrom ata_generic pata_acpi firewire_ohci crc32c_intel firewire_core xhci_pci crc_itu_t pata_via xhci_pci_renesas floppy [ 9.711849] CPU: 0 PID: 126 Comm: kworker/0:2 Not tainted 6.1.21-1-lts #1 08d2e5ece03136efa7c6aeea9a9c40916b1bd8da [ 9.722200] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./990FX Extreme4, BIOS P2.70 06/05/2014 [ 9.732204] Workqueue: events work_for_cpu_fn [ 9.736580] RIP: 0010:snd_ymfpci_create+0x681/0x698 [snd_ymfpci] [ 9.742594] Code: 8c c0 4c 89 e2 48 89 df 48 c7 c6 92 c6 8c c0 e8 15 d0 e9 ff 48 83 c4 08 44 89 e8 5b 5d 41 5c 41 5d 41 5e 41 5f e9 d3 7a 33 e3 <0f> 0b e9 cb fd ff ff 41 bd fb ff ff ff eb db 41 bd f4 ff ff ff eb [ 9.761358] RSP: 0018:ffffab64804e7da0 EFLAGS: 00010287 [ 9.766594] RAX: ffff8fa2df06c400 RBX: ffff8fa3073a8000 RCX: ffff8fa303fbc4a8 [ 9.773734] RDX: ffff8fa2df06d000 RSI: 0000000000000010 RDI: 0000000000000020 [ 9.780876] RBP: ffff8fa300b5d0d0 R08: ffff8fa3073a8e50 R09: 00000000df06bf00 [ 9.788018] R10: ffff8fa2df06bf00 R11: 00000000df068200 R12: ffff8fa3073a8918 [ 9.795159] R13: 0000000000000000 R14: 0000000000000080 R15: ffff8fa2df068200 [ 9.802317] FS: 0000000000000000(0000) GS:ffff8fa9fec00000(0000) knlGS:0000000000000000 [ 9.810414] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 9.816158] CR2: 000055febaf66500 CR3: 0000000101a2e000 CR4: 00000000000406f0 [ 9.823301] Call Trace: [ 9.825747] <TASK> [ 9.827889] snd_card_ymfpci_probe+0x194/0x950 [snd_ymfpci b78a5fe64b5663a6390a909c67808567e3e73615] [ 9.837030] ? finish_task_switch.isra.0+0x90/0x2d0 [ 9.841918] local_pci_probe+0x45/0x80 [ 9.845680] work_for_cpu_fn+0x1a/0x30 [ 9.849431] process_one_work+0x1c7/0x380 [ 9.853464] worker_thread+0x1af/0x390 [ 9.857225] ? rescuer_thread+0x3b0/0x3b0 [ 9.861254] kthread+0xde/0x110 [ 9.864414] ? kthread_complete_and_exit+0x20/0x20 [ 9.869210] ret_from_fork+0x22/0x30 [ 9.872792] </TASK> [ 9.874985] ---[ end trace 0000000000000000 ]--- Fixes: 5c1733e33c88 ("ALSA: memalloc: Align buffer allocations in page size") Signed-off-by: Tasos Sahanidis <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2023-03-29ALSA: ymfpci: Create card with device-managed snd_devm_card_new()Tasos Sahanidis1-1/+1
snd_card_ymfpci_remove() was removed in commit c6e6bb5eab74 ("ALSA: ymfpci: Allocate resources with device-managed APIs"), but the call to snd_card_new() was not replaced with snd_devm_card_new(). Since there was no longer a call to snd_card_free, unloading the module would eventually result in Oops: [697561.532887] BUG: unable to handle page fault for address: ffffffffc0924480 [697561.532893] #PF: supervisor read access in kernel mode [697561.532896] #PF: error_code(0x0000) - not-present page [697561.532899] PGD ae1e15067 P4D ae1e15067 PUD ae1e17067 PMD 11a8f5067 PTE 0 [697561.532905] Oops: 0000 [#1] PREEMPT SMP NOPTI [697561.532909] CPU: 21 PID: 5080 Comm: wireplumber Tainted: G W OE 6.2.7 #1 [697561.532914] Hardware name: System manufacturer System Product Name/TUF GAMING X570-PLUS, BIOS 4408 10/28/2022 [697561.532916] RIP: 0010:try_module_get.part.0+0x1a/0xe0 [697561.532924] Code: 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 55 48 89 e5 41 55 41 54 49 89 fc bf 01 00 00 00 e8 56 3c f8 ff <41> 83 3c 24 02 0f 84 96 00 00 00 41 8b 84 24 30 03 00 00 85 c0 0f [697561.532927] RSP: 0018:ffffbe9b858c3bd8 EFLAGS: 00010246 [697561.532930] RAX: ffff9815d14f1900 RBX: ffff9815c14e6000 RCX: 0000000000000000 [697561.532933] RDX: 0000000000000000 RSI: ffffffffc055092c RDI: ffffffffb3778c1a [697561.532935] RBP: ffffbe9b858c3be8 R08: 0000000000000040 R09: ffff981a1a741380 [697561.532937] R10: ffffbe9b858c3c80 R11: 00000009d56533a6 R12: ffffffffc0924480 [697561.532939] R13: ffff9823439d8500 R14: 0000000000000025 R15: ffff9815cd109f80 [697561.532942] FS: 00007f13084f1f80(0000) GS:ffff9824aef40000(0000) knlGS:0000000000000000 [697561.532945] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [697561.532947] CR2: ffffffffc0924480 CR3: 0000000145344000 CR4: 0000000000350ee0 [697561.532949] Call Trace: [697561.532951] <TASK> [697561.532955] try_module_get+0x13/0x30 [697561.532960] snd_ctl_open+0x61/0x1c0 [snd] [697561.532976] snd_open+0xb4/0x1e0 [snd] [697561.532989] chrdev_open+0xc7/0x240 [697561.532995] ? fsnotify_perm.part.0+0x6e/0x160 [697561.533000] ? __pfx_chrdev_open+0x10/0x10 [697561.533005] do_dentry_open+0x169/0x440 [697561.533009] vfs_open+0x2d/0x40 [697561.533012] path_openat+0xa9d/0x10d0 [697561.533017] ? debug_smp_processor_id+0x17/0x20 [697561.533022] ? trigger_load_balance+0x65/0x370 [697561.533026] do_filp_open+0xb2/0x160 [697561.533032] ? _raw_spin_unlock+0x19/0x40 [697561.533036] ? alloc_fd+0xa9/0x190 [697561.533040] do_sys_openat2+0x9f/0x160 [697561.533044] __x64_sys_openat+0x55/0x90 [697561.533048] do_syscall_64+0x3b/0x90 [697561.533052] entry_SYSCALL_64_after_hwframe+0x72/0xdc [697561.533056] RIP: 0033:0x7f1308a40db4 [697561.533059] Code: 24 20 eb 8f 66 90 44 89 54 24 0c e8 46 68 f8 ff 44 8b 54 24 0c 44 89 e2 48 89 ee 41 89 c0 bf 9c ff ff ff b8 01 01 00 00 0f 05 <48> 3d 00 f0 ff ff 77 32 44 89 c7 89 44 24 0c e8 78 68 f8 ff 8b 44 [697561.533062] RSP: 002b:00007ffcce664450 EFLAGS: 00000293 ORIG_RAX: 0000000000000101 [697561.533066] RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f1308a40db4 [697561.533068] RDX: 0000000000080000 RSI: 00007ffcce664690 RDI: 00000000ffffff9c [697561.533070] RBP: 00007ffcce664690 R08: 0000000000000000 R09: 0000000000000012 [697561.533072] R10: 0000000000000000 R11: 0000000000000293 R12: 0000000000080000 [697561.533074] R13: 00007f13054b069b R14: 0000565209f83200 R15: 0000000000000000 [697561.533078] </TASK> Fixes: c6e6bb5eab74 ("ALSA: ymfpci: Allocate resources with device-managed APIs") Signed-off-by: Tasos Sahanidis <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2023-03-28net: ethernet: mtk_eth_soc: fix tx throughput regression with direct 1G linksFelix Fietkau1-2/+0
Using the QDMA tx scheduler to throttle tx to line speed works fine for switch ports, but apparently caused a regression on non-switch ports. Based on a number of tests, it seems that this throttling can be safely dropped without re-introducing the issues on switch ports that the tx scheduling changes resolved. Link: https://lore.kernel.org/netdev/trinity-92c3826f-c2c8-40af-8339-bc6d0d3ffea4-1678213958520@3c-app-gmx-bs16/ Fixes: f63959c7eec3 ("net: ethernet: mtk_eth_soc: implement multi-queue support for per-port queues") Reported-by: Frank Wunderlich <[email protected]> Reported-by: Daniel Golle <[email protected]> Tested-by: Daniel Golle <[email protected]> Signed-off-by: Felix Fietkau <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-03-28Merge tag 'urgent-rcu.2023.03.28a' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu Pull RCU fix from Paul McKenney: "This brings the rcu_torture_read event trace into line with the new trace tools by replacing this event trace's __field() with the corresponding __array(). Without this, the new trace tools will fail when presented wtih an rcu_torture_read event trace, which is a regression from the viewpoint of trace tools users" Link: https://lore.kernel.org/all/[email protected]/ * tag 'urgent-rcu.2023.03.28a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: rcu: Fix rcu_torture_read ftrace event
2023-03-28Merge tag 'linux-kselftest-fixes-6.3-rc5' of ↵Linus Torvalds2-6/+24
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull Kselftest fixes from Shuah Khan: "One single fix for sigaltstack test -Wuninitialized warning found when building with clang" * tag 'linux-kselftest-fixes-6.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests: sigaltstack: fix -Wuninitialized
2023-03-28thermal: core: Drop excessive lockdep_assert_held() callsRafael J. Wysocki1-4/+2
The lockdep_assert_held() calls added to cooling_device_stats_setup() and cooling_device_stats_destroy() by commit 790930f44289 ("thermal: core: Introduce thermal_cooling_device_update()") trigger false-positive lockdep reports in code paths that are not subject to race conditions (before cooling device registration and after cooling device removal). For this reason, remove the lockdep_assert_held() calls from both cooling_device_stats_setup() and cooling_device_stats_destroy() and add one to thermal_cooling_device_stats_reinit() that has to be called under the cdev lock. Fixes: 790930f44289 ("thermal: core: Introduce thermal_cooling_device_update()") Link: https://lore.kernel.org/linux-acpi/[email protected] Reported-by: Imre Deak <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]>
2023-03-28Merge tag 's390-6.3-4' of ↵Linus Torvalds4-9/+6
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Vasily Gorbik: - Fix an error handling issue with PTRACE_GET_LAST_BREAK request so that -EFAULT is returned if put_user() fails, instead of ignoring it - Fix a build race for the modules_prepare target when CONFIG_EXPOLINE_EXTERN is enabled by reintroducing the dependence on scripts - Fix a memory leak in vfio_ap device driver - Add missing earlyclobber annotations to __clear_user() inline assembly to prevent incorrect register allocation * tag 's390-6.3-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/ptrace: fix PTRACE_GET_LAST_BREAK error handling s390: reintroduce expoline dependence to scripts s390/vfio-ap: fix memory leak in vfio_ap device driver s390/uaccess: add missing earlyclobber annotations to __clear_user()
2023-03-28ice: fix invalid check for empty list in ice_sched_assoc_vsi_to_agg()Jakob Koschel1-3/+5
The code implicitly assumes that the list iterator finds a correct handle. If 'vsi_handle' is not found the 'old_agg_vsi_info' was pointing to an bogus memory location. For safety a separate list iterator variable should be used to make the != NULL check on 'old_agg_vsi_info' correct under any circumstances. Additionally Linus proposed to avoid any use of the list iterator variable after the loop, in the attempt to move the list iterator variable declaration into the macro to avoid any potential misuse after the loop. Using it in a pointer comparison after the loop is undefined behavior and should be omitted if possible [1]. Fixes: 37c592062b16 ("ice: remove the VSI info from previous agg") Link: https://lore.kernel.org/all/CAHk-=wgRr_D8CB-D9Kg-c=EHreAsk5SqXPwr9Y7k9sA6cWXJ6w@mail.gmail.com/ [1] Signed-off-by: Jakob Koschel <[email protected]> Tested-by: Arpana Arland <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]>
2023-03-28ice: add profile conflict check for AVF FDIRJunfeng Guo1-0/+73
Add profile conflict check while adding some FDIR rules to avoid unexpected flow behavior, rules may have conflict including: IPv4 <---> {IPv4_UDP, IPv4_TCP, IPv4_SCTP} IPv6 <---> {IPv6_UDP, IPv6_TCP, IPv6_SCTP} For example, when we create an FDIR rule for IPv4, this rule will work on packets including IPv4, IPv4_UDP, IPv4_TCP and IPv4_SCTP. But if we then create an FDIR rule for IPv4_UDP and then destroy it, the first FDIR rule for IPv4 cannot work on pkt IPv4_UDP then. To prevent this unexpected behavior, we add restriction in software when creating FDIR rules by adding necessary profile conflict check. Fixes: 1f7ea1cd6a37 ("ice: Enable FDIR Configure for AVF") Signed-off-by: Junfeng Guo <[email protected]> Tested-by: Rafal Romanowski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2023-03-28ice: Fix ice_cfg_rdma_fltr() to only update relevant fieldsBrett Creeley1-4/+22
The current implementation causes ice_vsi_update() to update all VSI fields based on the cached VSI context. This also assumes that the ICE_AQ_VSI_PROP_Q_OPT_VALID bit is set. This can cause problems if the VSI context is not correctly synced by the driver. Fix this by only updating the fields that correspond to ICE_AQ_VSI_PROP_Q_OPT_VALID. Also, make sure to save the updated result in the cached VSI context on success. Fixes: 348048e724a0 ("ice: Implement iidc operations") Co-developed-by: Robert Malz <[email protected]> Signed-off-by: Robert Malz <[email protected]> Signed-off-by: Brett Creeley <[email protected]> Signed-off-by: Jesse Brandeburg <[email protected]> Reviewed-by: Piotr Raczynski <[email protected]> Tested-by: Jakub Andrysiak <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2023-03-28ice: fix W=1 headers mismatchJesse Brandeburg2-1/+2
make modules W=1 returns: .../ice/ice_txrx_lib.c:448: warning: Function parameter or member 'first_idx' not described in 'ice_finalize_xdp_rx' .../ice/ice_txrx.c:948: warning: Function parameter or member 'ntc' not described in 'ice_get_rx_buf' .../ice/ice_txrx.c:1038: warning: Excess function parameter 'rx_buf' description in 'ice_construct_skb' Fix these warnings by adding and deleting the deviant arguments. Fixes: 2fba7dc5157b ("ice: Add support for XDP multi-buffer on Rx side") Fixes: d7956d81f150 ("ice: Pull out next_to_clean bump out of ice_put_rx_buf()") CC: Maciej Fijalkowski <[email protected]> Signed-off-by: Jesse Brandeburg <[email protected]> Reviewed-by: Piotr Raczynski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2023-03-28io_uring/poll: clear single/double poll flags on poll armingJens Axboe1-0/+1
Unless we have at least one entry queued, then don't call into io_poll_remove_entries(). Normally this isn't possible, but if we retry poll then we can have ->nr_entries cleared again as we're setting it up. If this happens for a poll retry, then we'll still have at least REQ_F_SINGLE_POLL set. io_poll_remove_entries() then thinks it has entries to remove. Clear REQ_F_SINGLE_POLL and REQ_F_DOUBLE_POLL unconditionally when arming a poll request. Fixes: c16bda37594f ("io_uring/poll: allow some retries for poll triggering spuriously") Cc: [email protected] Reported-by: Pengfei Xu <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2023-03-28Merge branch 'xen-netback-fix-issue-introduced-recently'Paolo Abeni2-7/+24
Juergen Gross says: ==================== xen/netback: fix issue introduced recently The fix for XSA-423 introduced a bug which resulted in loss of network connection in some configurations. The first patch is fixing the issue, while the second one is removing a test which isn't needed. ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2023-03-28xen/netback: remove not needed test in xenvif_tx_build_gops()Juergen Gross1-4/+0
The tests for the number of grant mapping or copy operations reaching the array size of the operations buffer at the end of the main loop in xenvif_tx_build_gops() isn't needed. The loop can handle at maximum MAX_PENDING_REQS transfer requests, as XEN_RING_NR_UNCONSUMED_REQUESTS() is taking unsent responses into consideration, too. Remove the tests. Suggested-by: Jan Beulich <[email protected]> Signed-off-by: Juergen Gross <[email protected]> Reviewed-by: Paul Durrant <[email protected]> Signed-off-by: Paolo Abeni <[email protected]>
2023-03-28xen/netback: don't do grant copy across page boundaryJuergen Gross2-3/+24
Fix xenvif_get_requests() not to do grant copy operations across local page boundaries. This requires to double the maximum number of copy operations per queue, as each copy could now be split into 2. Make sure that struct xenvif_tx_cb doesn't grow too large. Cc: [email protected] Fixes: ad7f402ae4f4 ("xen/netback: Ensure protocol headers don't fall in the non-linear area") Signed-off-by: Juergen Gross <[email protected]> Reviewed-by: Paul Durrant <[email protected]> Signed-off-by: Paolo Abeni <[email protected]>
2023-03-28smsc911x: avoid PHY being resumed when interface is not upWolfram Sang1-2/+5
SMSC911x doesn't need mdiobus suspend/resume, that's why it sets 'mac_managed_pm'. However, setting it needs to be moved from init to probe, so mdiobus PM functions will really never be called (e.g. when the interface is not up yet during suspend/resume). Fixes: 3ce9f2bef755 ("net: smsc911x: Stop and start PHY during suspend and resume") Suggested-by: Heiner Kallweit <[email protected]> Signed-off-by: Wolfram Sang <[email protected]> Reviewed-by: Simon Horman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2023-03-28Merge branch 'net-mvpp2-rss-fixes'Paolo Abeni2-62/+54
Sven Auhagen says: ==================== net: mvpp2: rss fixes This patch series fixes up some rss problems in the mvpp2 driver. The classifier is missing some fragmentation flags, the parser has the QinQ headers switched and the PPPoE Layer 4 detecion is not working correctly. This is leading to no or bad rss for the default settings. ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2023-03-28net: mvpp2: parser fix PPPoESven Auhagen1-48/+34
In PPPoE add all IPv4 header option length to the parser and adjust the L3 and L4 offset accordingly. Currently the L4 match does not work with PPPoE and all packets are matched as L3 IP4 OPT. Fixes: 3f518509dedc ("ethernet: Add new driver for Marvell Armada 375 network unit") Signed-off-by: Sven Auhagen <[email protected]> Signed-off-by: Paolo Abeni <[email protected]>
2023-03-28net: mvpp2: parser fix QinQSven Auhagen1-2/+2
The mvpp2 parser entry for QinQ has the inner and outer VLAN in the wrong order. Fix the problem by swapping them. Fixes: 3f518509dedc ("ethernet: Add new driver for Marvell Armada 375 network unit") Signed-off-by: Sven Auhagen <[email protected]> Reviewed-by: Marcin Wojtas <[email protected]> Signed-off-by: Paolo Abeni <[email protected]>
2023-03-28net: mvpp2: classifier flow fix fragmentation flagsSven Auhagen1-12/+18
Add missing IP Fragmentation Flag. Fixes: f9358e12a0af ("net: mvpp2: split ingress traffic into multiple flows") Signed-off-by: Sven Auhagen <[email protected]> Reviewed-by: Marcin Wojtas <[email protected]> Signed-off-by: Paolo Abeni <[email protected]>
2023-03-27Merge tag 'linux-can-fixes-for-6.3-20230327' of ↵Jakub Kicinski2-8/+16
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2023-03-27 Oleksij Rempel and Hillf Danton contribute a patch for the CAN J1939 protocol that prevents a potential deadlock in j1939_sk_errqueue(). Ivan Orlov fixes an uninit-value in the CAN BCM protocol in the bcm_tx_setup() function. * tag 'linux-can-fixes-for-6.3-20230327' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can: can: bcm: bcm_tx_setup(): fix KMSAN uninit-value in vfs_write can: j1939: prevent deadlock by moving j1939_sk_errqueue() ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-03-27MAINTAINERS: remove the [email protected] listLukas Bulwahn1-6/+0
Some MAINTAINERS sections mention to mail patches to the list [email protected]. Probably due to changes on Intel's 01.org website and servers, the list server lists.01.org/ml01.01.org is simply gone. Considering emails recorded on lore.kernel.org, only a handful of emails where sent to the [email protected] list, and they are usually also sent to the netdev mailing list as well, where they are then picked up. So, there is no big benefit in restoring the linux-nfc elsewhere. Remove all occurrences of the [email protected] list in MAINTAINERS. Suggested-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/all/CAKXUXMzggxQ43DUZZRkPMGdo5WkzgA=i14ySJUFw4kZfE5ZaZA@mail.gmail.com/ Signed-off-by: Lukas Bulwahn <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-03-27net: fman: Add myself as a reviewerSean Anderson1-0/+1
I've read through or reworked a good portion of this driver. Add myself as a reviewer. Signed-off-by: Sean Anderson <[email protected]> Reviewed-by: Simon Horman <[email protected]> Acked-by: Madalin Bucur <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-03-27Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds4-42/+87
Pull kvm fixes from Paolo Bonzini: "RISC-V: - Fix VM hang in case of timer delta being zero ARM: - MMU fixes: - Read the MMU notifier seq before dropping the mmap lock to guard against reading a potentially stale VMA - Disable interrupts when walking user page tables to protect against the page table being freed - Read the MTE permissions for the VMA within the mmap lock critical section, avoiding the use of a potentally stale VMA pointer - vPMU fixes: - Return the sum of the current perf event value and PMC snapshot for reads from userspace - Don't save the value of guest writes to PMCR_EL0.{C,P}, which could otherwise lead to userspace erroneously resetting the vPMU during VM save/restore" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: riscv/kvm: Fix VM hang in case of timer delta being zero. KVM: arm64: Check for kvm_vma_mte_allowed in the critical section KVM: arm64: Disable interrupts while walking userspace PTs KVM: arm64: Retry fault if vma_lookup() results become invalid KVM: arm64: PMU: Don't save PMCR_EL0.{C,P} for the vCPU KVM: arm64: PMU: Fix GET_ONE_REG for vPMC regs to return the current value
2023-03-27ACPI: bus: Rework system-level device notification handlingRafael J. Wysocki1-46/+37
For ACPI drivers that provide a ->notify() callback and set ACPI_DRIVER_ALL_NOTIFY_EVENTS in their flags, that callback can be invoked while either the ->add() or the ->remove() callback is running without any synchronization at the bus type level which is counter to the common-sense expectation that notification handling should only be enabled when the driver is actually bound to the device. As a result, if the driver is not careful enough, it's ->notify() callback may crash when it is invoked too early or too late [1]. This issue has been amplified by commit d6fb6ee1820c ("ACPI: bus: Drop driver member of struct acpi_device") that made acpi_bus_notify() check for the presence of the driver and its ->notify() callback directly instead of using an extra driver pointer that was only set and cleared by the bus type code, but it was present before that commit although it was harder to reproduce then. It can be addressed by using the observation that acpi_device_install_notify_handler() can be modified to install the handler for all types of events when ACPI_DRIVER_ALL_NOTIFY_EVENTS is set in the driver flags, in which case acpi_bus_notify() will not need to invoke the driver's ->notify() callback any more and that callback will only be invoked after acpi_device_install_notify_handler() has run and before acpi_device_remove_notify_handler() runs, which implies the correct ordering with respect to the other ACPI driver callbacks. Modify the code accordingly and while at it, drop two redundant local variables from acpi_bus_notify() and turn its description comment into a proper kerneldoc one. Fixes: d6fb6ee1820c ("ACPI: bus: Drop driver member of struct acpi_device") Link: https://lore.kernel.org/linux-acpi/[email protected] # [1] Reported-by: Pierre Asselin <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]> Tested-by: Pierre Asselin <[email protected]>
2023-03-27Merge tag 'platform-drivers-x86-v6.3-3' of ↵Linus Torvalds5-20/+69
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver fixes from Hans de Goede: - Intel tpmi/vsec fixes - think-lmi fixes - two other small fixes / hw-id additions * tag 'platform-drivers-x86-v6.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: platform/surface: aggregator: Add missing fwnode_handle_put() platform/x86: think-lmi: Add possible_values for ThinkStation platform/x86: think-lmi: only display possible_values if available platform/x86: think-lmi: use correct possible_values delimiters platform/x86: think-lmi: add missing type attribute platform/x86 (gigabyte-wmi): Add support for A320M-S2H V2 platform/x86/intel: tpmi: Revise the comment of intel_vsec_add_aux platform/x86/intel: tpmi: Fix double free in tpmi_create_device() platform/x86/intel: vsec: Fix a memory leak in intel_vsec_add_aux
2023-03-27Merge tag 'mtd/fixes-for-6.3-rc5' of ↵Linus Torvalds4-3/+32
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux Pull MTD fixes from Miquel Raynal: "Raw NAND controller driver fixes: - meson: - Invalidate cache on polling ECC bit - Initialize struct with zeroes - nandsim: Artificially prevent sequential page reads ECC engine driver fixes: - mxic-ecc: Fix mxic_ecc_data_xfer_wait_for_completion() when irq is used Binging fixes: - jedec,spi-nor: Document CPOL/CPHA support" * tag 'mtd/fixes-for-6.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: mtd: rawnand: meson: invalidate cache on polling ECC bit mtd: rawnand: nandsim: Artificially prevent sequential page reads dt-bindings: mtd: jedec,spi-nor: Document CPOL/CPHA support mtd: nand: mxic-ecc: Fix mxic_ecc_data_xfer_wait_for_completion() when irq is used mtd: rawnand: meson: initialize struct with zeroes
2023-03-27s390/ptrace: fix PTRACE_GET_LAST_BREAK error handlingHeiko Carstens1-6/+2
Return -EFAULT if put_user() for the PTRACE_GET_LAST_BREAK request fails, instead of silently ignoring it. Reviewed-by: Sven Schnelle <[email protected]> Signed-off-by: Heiko Carstens <[email protected]> Signed-off-by: Vasily Gorbik <[email protected]>
2023-03-27s390: reintroduce expoline dependence to scriptsJiri Slaby (SUSE)1-1/+1
Expolines depend on scripts/basic/fixdep. And build of expolines can now race with the fixdep build: make[1]: *** Deleting file 'arch/s390/lib/expoline/expoline.o' /bin/sh: line 1: scripts/basic/fixdep: Permission denied make[1]: *** [../scripts/Makefile.build:385: arch/s390/lib/expoline/expoline.o] Error 126 make: *** [../arch/s390/Makefile:166: expoline_prepare] Error 2 The dependence was removed in the below Fixes: commit. So reintroduce the dependence on scripts. Fixes: a0b0987a7811 ("s390/nospec: remove unneeded header includes") Cc: Joe Lawrence <[email protected]> Cc: [email protected] Cc: Heiko Carstens <[email protected]> Cc: Vasily Gorbik <[email protected]> Cc: Alexander Gordeev <[email protected]> Cc: Christian Borntraeger <[email protected]> Cc: Sven Schnelle <[email protected]> Cc: [email protected] Signed-off-by: Jiri Slaby (SUSE) <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vasily Gorbik <[email protected]>
2023-03-27s390/vfio-ap: fix memory leak in vfio_ap device driverTony Krowiak1-1/+2
The device release callback function invoked to release the matrix device uses the dev_get_drvdata(device *dev) function to retrieve the pointer to the vfio_matrix_dev object in order to free its storage. The problem is, this object is not stored as drvdata with the device; since the kfree function will accept a NULL pointer, the memory for the vfio_matrix_dev object is never freed. Since the device being released is contained within the vfio_matrix_dev object, the container_of macro will be used to retrieve its pointer. Fixes: 1fde573413b5 ("s390: vfio-ap: base implementation of VFIO AP device driver") Signed-off-by: Tony Krowiak <[email protected]> Reviewed-by: Harald Freudenberger <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Heiko Carstens <[email protected]> Signed-off-by: Vasily Gorbik <[email protected]>
2023-03-27s390/uaccess: add missing earlyclobber annotations to __clear_user()Heiko Carstens1-1/+1
Add missing earlyclobber annotation to size, to, and tmp2 operands of the __clear_user() inline assembly since they are modified or written to before the last usage of all input operands. This can lead to incorrect register allocation for the inline assembly. Fixes: 6c2a9e6df604 ("[S390] Use alternative user-copy operations for new hardware.") Reported-by: Mark Rutland <[email protected]> Link: https://lore.kernel.org/all/[email protected]/ Cc: [email protected] Reviewed-by: Gerald Schaefer <[email protected]> Signed-off-by: Heiko Carstens <[email protected]> Signed-off-by: Vasily Gorbik <[email protected]>
2023-03-27Merge tag 'kvm-riscv-fixes-6.3-1' of https://github.com/kvm-riscv/linux into ↵Paolo Bonzini1-4/+2
HEAD KVM/riscv fixes for 6.3, take #1 - Fix VM hang in case of timer delta being zero
2023-03-27Merge tag 'kvmarm-fixes-6.3-2' of ↵Paolo Bonzini3-38/+85
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 fixes for 6.3, part #2 Fixes for a rather interesting set of bugs relating to the MMU: - Read the MMU notifier seq before dropping the mmap lock to guard against reading a potentially stale VMA - Disable interrupts when walking user page tables to protect against the page table being freed - Read the MTE permissions for the VMA within the mmap lock critical section, avoiding the use of a potentally stale VMA pointer Additionally, some fixes targeting the vPMU: - Return the sum of the current perf event value and PMC snapshot for reads from userspace - Don't save the value of guest writes to PMCR_EL0.{C,P}, which could otherwise lead to userspace erroneously resetting the vPMU during VM save/restore
2023-03-27can: bcm: bcm_tx_setup(): fix KMSAN uninit-value in vfs_writeIvan Orlov1-6/+10
Syzkaller reported the following issue: ===================================================== BUG: KMSAN: uninit-value in aio_rw_done fs/aio.c:1520 [inline] BUG: KMSAN: uninit-value in aio_write+0x899/0x950 fs/aio.c:1600 aio_rw_done fs/aio.c:1520 [inline] aio_write+0x899/0x950 fs/aio.c:1600 io_submit_one+0x1d1c/0x3bf0 fs/aio.c:2019 __do_sys_io_submit fs/aio.c:2078 [inline] __se_sys_io_submit+0x293/0x770 fs/aio.c:2048 __x64_sys_io_submit+0x92/0xd0 fs/aio.c:2048 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Uninit was created at: slab_post_alloc_hook mm/slab.h:766 [inline] slab_alloc_node mm/slub.c:3452 [inline] __kmem_cache_alloc_node+0x71f/0xce0 mm/slub.c:3491 __do_kmalloc_node mm/slab_common.c:967 [inline] __kmalloc+0x11d/0x3b0 mm/slab_common.c:981 kmalloc_array include/linux/slab.h:636 [inline] bcm_tx_setup+0x80e/0x29d0 net/can/bcm.c:930 bcm_sendmsg+0x3a2/0xce0 net/can/bcm.c:1351 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg net/socket.c:734 [inline] sock_write_iter+0x495/0x5e0 net/socket.c:1108 call_write_iter include/linux/fs.h:2189 [inline] aio_write+0x63a/0x950 fs/aio.c:1600 io_submit_one+0x1d1c/0x3bf0 fs/aio.c:2019 __do_sys_io_submit fs/aio.c:2078 [inline] __se_sys_io_submit+0x293/0x770 fs/aio.c:2048 __x64_sys_io_submit+0x92/0xd0 fs/aio.c:2048 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd CPU: 1 PID: 5034 Comm: syz-executor350 Not tainted 6.2.0-rc6-syzkaller-80422-geda666ff2276 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/12/2023 ===================================================== We can follow the call chain and find that 'bcm_tx_setup' function calls 'memcpy_from_msg' to copy some content to the newly allocated frame of 'op->frames'. After that the 'len' field of copied structure being compared with some constant value (64 or 8). However, if 'memcpy_from_msg' returns an error, we will compare some uninitialized memory. This triggers 'uninit-value' issue. This patch will add 'memcpy_from_msg' possible errors processing to avoid uninit-value issue. Tested via syzkaller Reported-by: [email protected] Link: https://syzkaller.appspot.com/bug?id=47f897f8ad958bbde5790ebf389b5e7e0a345089 Signed-off-by: Ivan Orlov <[email protected]> Fixes: 6f3b911d5f29b ("can: bcm: add support for CAN FD frames") Acked-by: Oliver Hartkopp <[email protected]> Link: https://lore.kernel.org/all/[email protected] Signed-off-by: Marc Kleine-Budde <[email protected]>
2023-03-27drm/i915/perf: Drop wakeref on GuC RC errorChris Wilson2-5/+15
If we fail to adjust the GuC run-control on opening the perf stream, make sure we unwind the wakeref just taken. v2: Retain old goto label names (Ashutosh) v3: Drop bitfield boolean Fixes: 01e742746785 ("drm/i915/guc: Support OA when Wa_16011777198 is enabled") Signed-off-by: Chris Wilson <[email protected]> Reviewed-by: Ashutosh Dixit <[email protected]> Signed-off-by: Umesh Nerlige Ramappa <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit 2810ac6c753d17ee2572ffb57fe2382a786a080a) Signed-off-by: Jani Nikula <[email protected]>
2023-03-27drm/i915/dpt: Treat the DPT BO as a framebufferVille Syrjälä3-1/+6
Currently i915_gem_object_is_framebuffer() doesn't treat the BO containing the framebuffer's DPT as a framebuffer itself. This means eg. that the shrinker can evict the DPT BO while leaving the actual FB BO bound, when the DPT is allocated from regular shmem. That causes an immediate oops during hibernate as we try to rewrite the PTEs inside the already evicted DPT obj. TODO: presumably this might also be the reason for the DPT related display faults under heavy memory pressure, but I'm still not sure how that would happen as the object should be pinned by intel_dpt_pin() while in active use by the display engine... Cc: [email protected] Cc: Juha-Pekka Heikkila <[email protected]> Cc: Matthew Auld <[email protected]> Cc: Imre Deak <[email protected]> Fixes: 0dc987b699ce ("drm/i915/display: Add smem fallback allocation for dpt") Signed-off-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Reviewed-by: Juha-Pekka Heikkila <[email protected]> (cherry picked from commit 779cb5ba64ec7df80675a956c9022929514f517a) Signed-off-by: Jani Nikula <[email protected]>
2023-03-27drm/i915/gem: Flush lmem contents after constructionChris Wilson1-1/+2
i915_gem_object_create_lmem_from_data() lacks the flush of the data written to lmem to ensure the object is marked as dirty and the writes flushed to the backing store. Once created, we can immediately release the obj->mm.mapping caching of the vmap. Fixes: 7acbbc7cf485 ("drm/i915/guc: put all guc objects in lmem when available") Cc: Matthew Auld <[email protected]> Cc: Daniele Ceraolo Spurio <[email protected]> Cc: Andi Shyti <[email protected]> Cc: Matthew Brost <[email protected]> Cc: John Harrison <[email protected]> Signed-off-by: Chris Wilson <[email protected]> Cc: <[email protected]> # v5.16+ Signed-off-by: Nirmoy Das <[email protected]> Reviewed-by: Andi Shyti <[email protected]> Reviewed-by: Nirmoy Das <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit e2ee10474ce766686e7a7496585cdfaf79e3a1bf) Signed-off-by: Jani Nikula <[email protected]>
2023-03-27drm/i915/tc: Fix the ICL PHY ownership check in TC-cold stateImre Deak1-2/+2
The commit renaming icl_tc_phy_is_in_safe_mode() to icl_tc_phy_take_ownership() didn't flip the function's return value accordingly, fix this up. This didn't cause an actual problem besides state check errors, since the function is only used during HW readout. Cc: José Roberto de Souza <[email protected]> Fixes: f53979d68a77 ("drm/i915/display/tc: Rename safe_mode functions ownership") Reviewed-by: José Roberto de Souza <[email protected]> Reviewed-by: Ville Syrjälä <[email protected]> Signed-off-by: Imre Deak <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit f2c7959dda614d9b7c6a41510492de39d31705ec) Signed-off-by: Jani Nikula <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.