aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2019-12-04Merge tag 'pm-5.5-rc1-2' of ↵Linus Torvalds19-120/+324
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull additional power management updates from Rafael Wysocki: "These fix an ACPI EC driver bug exposed by the recent rework of the suspend-to-idle code flow, reintroduce frequency constraints into device PM QoS (in preparation for adding QoS support to devfreq), drop a redundant field from struct cpuidle_state and clean up Kconfig in some places. Specifics: - Avoid a race condition in the ACPI EC driver that may cause systems to be unable to leave suspend-to-idle (Rafael Wysocki) - Drop the "disabled" field, which is redundant, from struct cpuidle_state (Rafael Wysocki) - Reintroduce device PM QoS frequency constraints (temporarily introduced and than dropped during the 5.4 cycle) in preparation for adding QoS support to devfreq (Leonard Crestez) - Clean up indentation (in multiple places) and the cpuidle drivers help text in Kconfig (Krzysztof Kozlowski, Randy Dunlap)" * tag 'pm-5.5-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: PM: s2idle: Rework ACPI events synchronization ACPI: EC: Rework flushing of pending work PM / devfreq: Add missing locking while setting suspend_freq PM / QoS: Restore DEV_PM_QOS_MIN/MAX_FREQUENCY PM / QoS: Reorder pm_qos/freq_qos/dev_pm_qos structs PM / QoS: Initial kunit test PM / QoS: Redefine FREQ_QOS_MAX_DEFAULT_VALUE to S32_MAX power: avs: Fix Kconfig indentation cpufreq: Fix Kconfig indentation cpuidle: minor Kconfig help text fixes cpuidle: Drop disabled field from struct cpuidle_state cpuidle: Fix Kconfig indentation
2019-12-04io_uring: ensure deferred timeouts copy necessary dataJens Axboe1-41/+42
If we defer a timeout, we should ensure that we copy the timespec when we have consumed the sqe. This is similar to commit f67676d160c6 for read/write requests. We already did this correctly for timeouts deferred as links, but do it generally and use the infrastructure added by commit 1a6b74fc8702 instead of having the timeout deferral use its own. Signed-off-by: Jens Axboe <[email protected]>
2019-12-04io_uring: allow IO_SQE_* flags on IORING_OP_TIMEOUTJens Axboe1-3/+0
There's really no reason why we forbid things like link/drain etc on regular timeout commands. Enable the usual SQE flags on timeouts. Reported-by: 李通洲 <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2019-12-04iomap: fix sub-page uptodate handlingChristoph Hellwig1-10/+25
bio completions can race when a page spans more than one file system block. Add a spinlock to synchronize marking the page uptodate. Fixes: 9dc55f1389f9 ("iomap: add support for sub-pagesize buffered I/O without buffer heads") Reported-by: Jan Stancek <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]> Reviewed-by: Dave Chinner <[email protected]> Reviewed-by: Darrick J. Wong <[email protected]> Signed-off-by: Darrick J. Wong <[email protected]>
2019-12-04Merge branch 'v5.5/vfio/jiang-yi-irq-bypass-unregister-v1' into v5.5/vfio/nextAlex Williamson1-1/+1
2019-12-04drm/omap: fix dma_addr refcountingTomi Valkeinen1-0/+4
cec4fa7511ef7a73eb635834e9d85b25a5b47a98 ("drm/omap: use refcount API to track the number of users of dma_addr") changed omap_gem.c to use refcounting API to track dma_addr uses. However, the driver only tracks the refcounts for non-contiguous buffers, and the patch didn't fully take this in account. After the patch, the driver always decreased refcount in omap_gem_unpin, instead of decreasing the refcount only for non-contiguous buffers. This leads to refcounting mismatch. As for the contiguous cases the refcount is never increased, fix this issue by returning from omap_gem_unpin if the buffer being unpinned is contiguous. Signed-off-by: Tomi Valkeinen <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Fixes: cec4fa7511ef ("drm/omap: use refcount API to track the number of users of dma_addr") Reviewed-by: Laurent Pinchart <[email protected]>
2019-12-04null_blk: remove unused variable warning on !CONFIG_BLK_DEV_ZONEDJens Axboe1-2/+1
If BLK_DEV_ZONED isn't set, 'ret' isn't used. This makes gcc complain, rightfully. Move ret where it is used. Fixes: 979d54475e0b ("null_blk: cleanup null_gendisk_register") Signed-off-by: Jens Axboe <[email protected]>
2019-12-04brd: warn on un-aligned bufferMing Lei1-0/+4
Queue dma alignment limit requires users(fs, target, ...) of block layer to pass aligned buffer. So far brd doesn't support un-aligned buffer, even though it is easy to support it. However, given brd is often used for debug purpose, and there are other drivers which can't support un-aligned buffer too. So add warning so that brd users know what to fix. Reported-by: Stephen Rust <[email protected]> Cc: Stephen Rust <[email protected]> Signed-off-by: Ming Lei <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2019-12-04brd: remove max_hw_sectors queue limitMing Lei1-1/+0
Now we depend on blk_queue_split() to respect most of queue limit (the only one exception could be dma alignment), however blk_queue_split() isn't used for brd, so this limit isn't respected since v4.3. Also max_hw_sectors limit doesn't play a big role for brd, which is added since brd is added to tree for unknown reason. So remove it. Signed-off-by: Ming Lei <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2019-12-04ALSA: pcm: oss: Avoid potential buffer overflowsTakashi Iwai3-0/+6
syzkaller reported an invalid access in PCM OSS read, and this seems to be an overflow of the internal buffer allocated for a plugin. Since the rate plugin adjusts its transfer size dynamically, the calculation for the chained plugin might be bigger than the given buffer size in some extreme cases, which lead to such an buffer overflow as caught by KASAN. Fix it by limiting the max transfer size properly by checking against the destination size in each plugin transfer callback. Reported-by: [email protected] Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2019-12-04orangefs: posix open permission checking...Mike Marshall3-7/+43
Orangefs has no open, and orangefs checks file permissions on each file access. Posix requires that file permissions be checked on open and nowhere else. Orangefs-through-the-kernel needs to seem posix compliant. The VFS opens files, even if the filesystem provides no method. We can see if a file was successfully opened for read and or for write by looking at file->f_mode. When writes are flowing from the page cache, file is no longer available. We can trust the VFS to have checked file->f_mode before writing to the page cache. The mode of a file might change between when it is opened and IO commences, or it might be created with an arbitrary mode. We'll make sure we don't hit EACCES during the IO stage by using UID 0. Some of the time we have access without changing to UID 0 - how to check? Signed-off-by: Mike Marshall <[email protected]>
2019-12-04tracing: Do not create directories if lockdown is in affectSteven Rostedt (VMware)2-0/+23
If lockdown is disabling tracing on boot up, it prevents the tracing files from even bering created. But when that happens, there's several places that will give a warning that the files were not created as that is usually a sign of a bug. Add in strategic locations where a check is made to see if tracing is disabled by lockdown, and if it is, do not go further, and fail silently (but print that tracing is disabled by lockdown, without doing a WARN_ON()). Cc: Matthew Garrett <[email protected]> Fixes: 17911ff38aa5 ("tracing: Add locked_down checks to the open calls of files created for tracefs") Signed-off-by: Steven Rostedt (VMware) <[email protected]>
2019-12-05powerpc: Fix vDSO clock_getres()Vincenzo Frascino5-5/+14
clock_getres in the vDSO library has to preserve the same behaviour of posix_get_hrtimer_res(). In particular, posix_get_hrtimer_res() does: sec = 0; ns = hrtimer_resolution; and hrtimer_resolution depends on the enablement of the high resolution timers that can happen either at compile or at run time. Fix the powerpc vdso implementation of clock_getres keeping a copy of hrtimer_resolution in vdso data and using that directly. Fixes: a7f290dad32e ("[PATCH] powerpc: Merge vdso's and add vdso support to 32 bits kernel") Cc: [email protected] Signed-off-by: Vincenzo Frascino <[email protected]> Reviewed-by: Christophe Leroy <[email protected]> Acked-by: Shuah Khan <[email protected]> [chleroy: changed CLOCK_REALTIME_RES to CLOCK_HRTIMER_RES] Signed-off-by: Christophe Leroy <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/a55eca3a5e85233838c2349783bcb5164dae1d09.1575273217.git.christophe.leroy@c-s.fr
2019-12-05powerpc/pmem: Fix kernel crash due to wrong range value usage in ↵Aneesh Kumar K.V1-1/+1
flush_dcache_range This patch fix the below kernel crash. BUG: Unable to handle kernel data access on read at 0xc000000380000000 Faulting instruction address: 0xc00000000008b6f0 cpu 0x5: Vector: 300 (Data Access) at [c0000000d8587790] pc: c00000000008b6f0: arch_remove_memory+0x150/0x210 lr: c00000000008b720: arch_remove_memory+0x180/0x210 sp: c0000000d8587a20 msr: 800000000280b033 dar: c000000380000000 dsisr: 40000000 current = 0xc0000000d8558600 paca = 0xc00000000fff8f00 irqmask: 0x03 irq_happened: 0x01 pid = 1220, comm = ndctl enter ? for help memunmap_pages+0x33c/0x410 devm_action_release+0x30/0x50 release_nodes+0x30c/0x3a0 device_release_driver_internal+0x178/0x240 unbind_store+0x74/0x190 drv_attr_store+0x44/0x60 sysfs_kf_write+0x74/0xa0 kernfs_fop_write+0x1b0/0x260 __vfs_write+0x3c/0x70 vfs_write+0xe4/0x200 ksys_write+0x7c/0x140 system_call+0x5c/0x68 Fixes: 076265907cf9 ("powerpc: Chunk calls to flush_dcache_range in arch_*_memory") Reported-by: Sachin Sant <[email protected]> Signed-off-by: Aneesh Kumar K.V <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2019-12-05powerpc/xive: Skip ioremap() of ESB pages for LSI interruptsCédric Le Goater1-2/+10
The PCI INTx interrupts and other LSI interrupts are handled differently under a sPAPR platform. When the interrupt source characteristics are queried, the hypervisor returns an H_INT_ESB flag to inform the OS that it should be using the H_INT_ESB hcall for interrupt management and not loads and stores on the interrupt ESB pages. A default -1 value is returned for the addresses of the ESB pages. The driver ignores this condition today and performs a bogus IO mapping. Recent changes and the DEBUG_VM configuration option make the bug visible with : kernel BUG at arch/powerpc/include/asm/book3s/64/pgtable.h:612! Oops: Exception in kernel mode, sig: 5 [#1] LE PAGE_SIZE=64K MMU=Radix MMU=Hash SMP NR_CPUS=1024 NUMA pSeries Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.4.0-0.rc6.git0.1.fc32.ppc64le #1 NIP: c000000000f63294 LR: c000000000f62e44 CTR: 0000000000000000 REGS: c0000000fa45f0d0 TRAP: 0700 Not tainted (5.4.0-0.rc6.git0.1.fc32.ppc64le) ... NIP ioremap_page_range+0x4c4/0x6e0 LR ioremap_page_range+0x74/0x6e0 Call Trace: ioremap_page_range+0x74/0x6e0 (unreliable) do_ioremap+0x8c/0x120 __ioremap_caller+0x128/0x140 ioremap+0x30/0x50 xive_spapr_populate_irq_data+0x170/0x260 xive_irq_domain_map+0x8c/0x170 irq_domain_associate+0xb4/0x2d0 irq_create_mapping+0x1e0/0x3b0 irq_create_fwspec_mapping+0x27c/0x3e0 irq_create_of_mapping+0x98/0xb0 of_irq_parse_and_map_pci+0x168/0x230 pcibios_setup_device+0x88/0x250 pcibios_setup_bus_devices+0x54/0x100 __of_scan_bus+0x160/0x310 pcibios_scan_phb+0x330/0x390 pcibios_init+0x8c/0x128 do_one_initcall+0x60/0x2c0 kernel_init_freeable+0x290/0x378 kernel_init+0x2c/0x148 ret_from_kernel_thread+0x5c/0x80 Fixes: bed81ee181dd ("powerpc/xive: introduce H_INT_ESB hcall") Cc: [email protected] # v4.14+ Signed-off-by: Cédric Le Goater <[email protected]> Tested-by: Daniel Axtens <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2019-12-05powerpc/kasan: Fix boot failure with RELOCATABLE && FSL_BOOKEChristophe Leroy1-3/+3
When enabling CONFIG_RELOCATABLE and CONFIG_KASAN on FSL_BOOKE, the kernel doesn't boot. relocate_init() requires KASAN early shadow area to be set up because it needs access to the device tree through generic functions. Call kasan_early_init() before calling relocate_init() Reported-by: Lexi Shao <[email protected]> Fixes: 2edb16efc899 ("powerpc/32: Add KASAN support") Signed-off-by: Christophe Leroy <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/b58426f1664a4b344ff696d18cacf3b3e8962111.1575036985.git.christophe.leroy@c-s.fr
2019-12-04drm/tegra: Run hub cleanup on ->remove()Thierry Reding1-0/+3
The call to tegra_display_hub_cleanup() that takes care of disabling the window groups is missing from the driver's ->remove() callback. Call it to make sure the runtime PM reference counts for the display controllers are balanced. Signed-off-by: Thierry Reding <[email protected]>
2019-12-04drm/tegra: sor: Make the +5V HDMI supply optionalThierry Reding1-2/+16
The SOR supports multiple display modes, but only when driving an HDMI monitor does it make sense to control the +5V power supply. eDP and DP don't need this, so make it optional. This fixes a crash observed during system suspend/resume. Reviewed-by: Daniel Vetter <[email protected]> Signed-off-by: Thierry Reding <[email protected]>
2019-12-04drm/tegra: Silence expected errors on IOMMU attachThierry Reding3-5/+3
Subdevices may not be hooked up to an IOMMU via device tree. Detect such situations and avoid confusing users by not emitting an error message. Reviewed-by: Daniel Vetter <[email protected]> Signed-off-by: Thierry Reding <[email protected]>
2019-12-04drm/tegra: vic: Export module device tableThierry Reding1-2/+3
Export the module device table to ensure the VIC compatible strings are listed in the module's aliases table. This in turn causes the driver to be automatically loaded on boot if VIC is the only enabled subdevice of the logical host1x DRM device. Reviewed-by: Daniel Vetter <[email protected]> Signed-off-by: Thierry Reding <[email protected]>
2019-12-04drm/tegra: sor: Implement system suspend/resumeThierry Reding1-5/+19
Upon system suspend, make sure the +5V HDMI regulator is disabled. This avoids potentially leaking current to the HDMI connector. This also makes sure that upon resume the regulator is enabled again, which in some cases is necessary to properly restore the state of the supply on resume. Reviewed-by: Daniel Vetter <[email protected]> Signed-off-by: Thierry Reding <[email protected]>
2019-12-04drm/tegra: Use proper IOVA address for cursor imageThierry Reding1-8/+8
The IOVA address for the cursor is the result of mapping the buffer object for the given display controller. Make sure to use the proper IOVA address as stored in the cursor's plane state. Reviewed-by: Daniel Vetter <[email protected]> Signed-off-by: Thierry Reding <[email protected]>
2019-12-04drm/tegra: gem: Remove premature import restrictionsThierry Reding2-7/+11
All the display related blocks on Tegra require contiguous memory. Using the DMA API, there is no knowing at import time which device will end up using the buffer, so it's not known whether or not an IOMMU will be used to map the buffer. Move the check for non-contiguous buffers/mappings to the tegra_dc_pin() function which is now the earliest point where it is known if a DMA BUF can be used by the given device or not. v2: add check for contiguous buffer/mapping in tegra_dc_pin() Reviewed-by: Daniel Vetter <[email protected]> Signed-off-by: Thierry Reding <[email protected]>
2019-12-04drm/tegra: gem: Properly pin imported buffersThierry Reding1-0/+43
Buffers that are imported from a DMA-BUF don't have pages allocated with them. At the same time an SG table for them can't be derived using the DMA API helpers because the necessary information doesn't exist. However there's already an SG table that was created during import, so this can simply be duplicated. Signed-off-by: Thierry Reding <[email protected]>
2019-12-04drm/tegra: hub: Remove bogus connection mutex checkThierry Reding1-3/+0
The Tegra DRM never actually took that lock, so the driver was broken until generic locking was added in commit: commit b962a12050a387e4bbf3a48745afe1d29d396b0d Author: Rob Clark <[email protected]> Date: Mon Oct 22 14:31:22 2018 +0200 drm/atomic: integrate modeset lock with private objects It's now no longer necessary to take that lock, so drop the check. v2: add rationale for why it is now safe to drop the check (Daniel) Reviewed-by: Daniel Vetter <[email protected]> Signed-off-by: Thierry Reding <[email protected]>
2019-12-04arm64: mm: Fix column alignment for UXN in kernel_page_tablesMark Brown1-0/+1
UXN is the only individual PTE bit other than the PTE_ATTRINDX_MASK ones which doesn't have both a set and a clear value provided, meaning that the columns in the table won't all be aligned. The PTE_ATTRINDX_MASK values are all both mutually exclusive and longer so are listed last to make a single final column for those values. Ensure everything is aligned by providing a clear value for UXN. Acked-by: Mark Rutland <[email protected]> Signed-off-by: Mark Brown <[email protected]> Signed-off-by: Catalin Marinas <[email protected]>
2019-12-04arm64: insn: consistently handle exit textMark Rutland3-4/+22
A kernel built with KASAN && FTRACE_WITH_REGS && !MODULES, produces a boot-time splat in the bowels of ftrace: | [ 0.000000] ftrace: allocating 32281 entries in 127 pages | [ 0.000000] ------------[ cut here ]------------ | [ 0.000000] WARNING: CPU: 0 PID: 0 at kernel/trace/ftrace.c:2019 ftrace_bug+0x27c/0x328 | [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 5.4.0-rc3-00008-g7f08ae53a7e3 #13 | [ 0.000000] Hardware name: linux,dummy-virt (DT) | [ 0.000000] pstate: 60000085 (nZCv daIf -PAN -UAO) | [ 0.000000] pc : ftrace_bug+0x27c/0x328 | [ 0.000000] lr : ftrace_init+0x640/0x6cc | [ 0.000000] sp : ffffa000120e7e00 | [ 0.000000] x29: ffffa000120e7e00 x28: ffff00006ac01b10 | [ 0.000000] x27: ffff00006ac898c0 x26: dfffa00000000000 | [ 0.000000] x25: ffffa000120ef290 x24: ffffa0001216df40 | [ 0.000000] x23: 000000000000018d x22: ffffa0001244c700 | [ 0.000000] x21: ffffa00011bf393c x20: ffff00006ac898c0 | [ 0.000000] x19: 00000000ffffffff x18: 0000000000001584 | [ 0.000000] x17: 0000000000001540 x16: 0000000000000007 | [ 0.000000] x15: 0000000000000000 x14: ffffa00010432770 | [ 0.000000] x13: ffff940002483519 x12: 1ffff40002483518 | [ 0.000000] x11: 1ffff40002483518 x10: ffff940002483518 | [ 0.000000] x9 : dfffa00000000000 x8 : 0000000000000001 | [ 0.000000] x7 : ffff940002483519 x6 : ffffa0001241a8c0 | [ 0.000000] x5 : ffff940002483519 x4 : ffff940002483519 | [ 0.000000] x3 : ffffa00011780870 x2 : 0000000000000001 | [ 0.000000] x1 : 1fffe0000d591318 x0 : 0000000000000000 | [ 0.000000] Call trace: | [ 0.000000] ftrace_bug+0x27c/0x328 | [ 0.000000] ftrace_init+0x640/0x6cc | [ 0.000000] start_kernel+0x27c/0x654 | [ 0.000000] random: get_random_bytes called from print_oops_end_marker+0x30/0x60 with crng_init=0 | [ 0.000000] ---[ end trace 0000000000000000 ]--- | [ 0.000000] ftrace faulted on writing | [ 0.000000] [<ffffa00011bf393c>] _GLOBAL__sub_D_65535_0___tracepoint_initcall_level+0x4/0x28 | [ 0.000000] Initializing ftrace call sites | [ 0.000000] ftrace record flags: 0 | [ 0.000000] (0) | [ 0.000000] expected tramp: ffffa000100b3344 This is due to an unfortunate combination of several factors. Building with KASAN results in the compiler generating anonymous functions to register/unregister global variables against the shadow memory. These functions are placed in .text.startup/.text.exit, and given mangled names like _GLOBAL__sub_{I,D}_65535_0_$OTHER_SYMBOL. The kernel linker script places these in .init.text and .exit.text respectively, which are both discarded at runtime as part of initmem. Building with FTRACE_WITH_REGS uses -fpatchable-function-entry=2, which also instruments KASAN's anonymous functions. When these are discarded with the rest of initmem, ftrace removes dangling references to these call sites. Building without MODULES implicitly disables STRICT_MODULE_RWX, and causes arm64's patch_map() function to treat any !core_kernel_text() symbol as something that can be modified in-place. As core_kernel_text() is only true for .text and .init.text, with the latter depending on system_state < SYSTEM_RUNNING, we'll treat .exit.text as something that can be patched in-place. However, .exit.text is mapped read-only. Hence in this configuration the ftrace init code blows up while trying to patch one of the functions generated by KASAN. We could try to filter out the call sites in .exit.text rather than initializing them, but this would be inconsistent with how we handle .init.text, and requires hooking into core bits of ftrace. The behaviour of patch_map() is also inconsistent today, so instead let's clean that up and have it consistently handle .exit.text. This patch teaches patch_map() to handle .exit.text at init time, preventing the boot-time splat above. The flow of patch_map() is reworked to make the logic clearer and minimize redundant conditionality. Fixes: 3b23e4991fb66f6d ("arm64: implement ftrace with regs") Signed-off-by: Mark Rutland <[email protected]> Cc: Amit Daniel Kachhap <[email protected]> Cc: Ard Biesheuvel <[email protected]> Cc: Torsten Duwe <[email protected]> Cc: Will Deacon <[email protected]> Signed-off-by: Catalin Marinas <[email protected]>
2019-12-04arm64: mm: Fix initialisation of DMA zones on non-NUMA systemsWill Deacon1-14/+11
John reports that the recently merged commit 1a8e1cef7603 ("arm64: use both ZONE_DMA and ZONE_DMA32") breaks the boot on his DB845C board: | Booting Linux on physical CPU 0x0000000000 [0x517f803c] | Linux version 5.4.0-mainline-10675-g957a03b9e38f | Machine model: Thundercomm Dragonboard 845c | [...] | Built 1 zonelists, mobility grouping on. Total pages: -188245 | Kernel command line: earlycon | firmware_class.path=/vendor/firmware/ androidboot.hardware=db845c | init=/init androidboot.boot_devices=soc/1d84000.ufshc | printk.devkmsg=on buildvariant=userdebug root=/dev/sda2 | androidboot.bootdevice=1d84000.ufshc androidboot.serialno=c4e1189c | androidboot.baseband=sda | msm_drm.dsi_display0=dsi_lt9611_1080_video_display: | androidboot.slot_suffix=_a skip_initramfs rootwait ro init=/init | | <hangs indefinitely here> This is because, when CONFIG_NUMA=n, zone_sizes_init() fails to handle memblocks that fall entirely within the ZONE_DMA region and erroneously ends up trying to add a negatively-sized region into the following ZONE_DMA32, which is later interpreted as a large unsigned region by the core MM code. Rework the non-NUMA implementation of zone_sizes_init() so that the start address of the memblock being processed is adjusted according to the end of the previous zone, which is then range-checked before updating the hole information of subsequent zones. Cc: Nicolas Saenz Julienne <[email protected]> Cc: Christoph Hellwig <[email protected]> Cc: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/lkml/CALAqxLVVcsmFrDKLRGRq7GewcW405yTOxG=KR3csVzQ6bXutkA@mail.gmail.com Fixes: 1a8e1cef7603 ("arm64: use both ZONE_DMA and ZONE_DMA32") Reported-by: John Stultz <[email protected]> Tested-by: John Stultz <[email protected]> Signed-off-by: Will Deacon <[email protected]> Signed-off-by: Catalin Marinas <[email protected]>
2019-12-04kvm: vmx: Stop wasting a page for guest_msrsJim Mattson2-11/+9
We will never need more guest_msrs than there are indices in vmx_msr_index. Thus, at present, the guest_msrs array will not exceed 168 bytes. Signed-off-by: Jim Mattson <[email protected]> Reviewed-by: Liran Alon <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2019-12-04KVM: x86: fix out-of-bounds write in KVM_GET_EMULATED_CPUID (CVE-2019-19332)Paolo Bonzini1-1/+4
The bounds check was present in KVM_GET_SUPPORTED_CPUID but not KVM_GET_EMULATED_CPUID. Reported-by: [email protected] Fixes: 84cffe499b94 ("kvm: Emulate MOVBE", 2013-10-29) Signed-off-by: Paolo Bonzini <[email protected]>
2019-12-04xen-blkback: allow module to be cleanly unloadedPaul Durrant3-0/+22
Add a module_exit() to perform the necessary clean-up. Signed-off-by: Paul Durrant <[email protected]> Reviewed-by: "Roger Pau Monné" <[email protected]> Reviewed-by: Juergen Gross <[email protected]> Signed-off-by: Juergen Gross <[email protected]>
2019-12-04xen/xenbus: reference count registered modulesPaul Durrant1-1/+12
To prevent a PV driver module being removed whilst attached to its other end, and hence xenbus calling into potentially invalid text, take a reference on the module before calling the probe() method (dropping it if unsuccessful) and drop the reference after returning from the remove() method. Suggested-by: Jan Beulich <[email protected]> Signed-off-by: Paul Durrant <[email protected]> Reviewed-by: Jan Beulich <[email protected]> Reviewed-by: Juergen Gross <[email protected]> Signed-off-by: Juergen Gross <[email protected]>
2019-12-04docs/core-api: Remove possibly confusing sub-headings from Bit OperationsMichael Ellerman1-9/+0
The recent commit 81d2c6f81996 ("kasan: support instrumented bitops combined with generic bitops"), split the KASAN instrumented bitops into separate headers for atomic, non-atomic and locking operations. This was done to allow arches to include just the instrumented bitops they need, while also using some of the generic bitops in asm-generic/bitops (which are automatically instrumented). The generic bitops are already split into atomic, non-atomic and locking headers. This split required an update to kernel-api.rst because it included include/asm-generic/bitops-instrumented.h, which no longer exists. So now kernel-api.rst includes all three instrumented headers to get the definitions for all the bitops. When adding the three headers it seemed sensible to add sub-headings for each, ie. "Atomic", "Non-atomic" and "Locking". The confusion is that test_bit() is (and always has been) in non-atomic.h, but is documented elsewhere (atomic_bitops.txt) as being atomic. So having it appear under the "Non-atomic" heading is possibly confusing. Probably test_bit() should move from bitops/non-atomic.h to atomic.h, but that has flow on effects. For now just remove the newly added sub-headings in the documentation, so we at least aren't adding to the confusion about whether test_bit() is atomic or not. Signed-off-by: Michael Ellerman <[email protected]>
2019-12-04Merge branches 'acpi-bus', 'acpi-button', 'acpi-sysfs' and 'acpi-misc'Rafael J. Wysocki5-9/+22
* acpi-bus: ACPI: bus: Fix NULL pointer check in acpi_bus_get_private_data() * acpi-button: ACPI: button: Add DMI quirk for Acer Switch 10 SW5-032 lid-switch * acpi-sysfs: ACPI: sysfs: Change ACPI_MASKABLE_GPE_MAX to 0x100 * acpi-misc: ACPI: Fix Kconfig indentation
2019-12-04Merge branches 'pm-sleep', 'pm-cpuidle', 'pm-cpufreq', 'pm-devfreq' and 'pm-avs'Rafael J. Wysocki13-77/+82
* pm-sleep: ACPI: PM: s2idle: Rework ACPI events synchronization ACPI: EC: Rework flushing of pending work * pm-cpuidle: cpuidle: minor Kconfig help text fixes cpuidle: Drop disabled field from struct cpuidle_state cpuidle: Fix Kconfig indentation * pm-cpufreq: cpufreq: Fix Kconfig indentation * pm-devfreq: PM / devfreq: Add missing locking while setting suspend_freq * pm-avs: power: avs: Fix Kconfig indentation
2019-12-04ia64: agp: Replace empty define with do whileCorentin Labbe1-2/+2
It's dangerous to use empty code define. Furthermore it lead to the following warning: drivers/char/agp/generic.c: In function « agp_generic_destroy_page »: drivers/char/agp/generic.c:1266:28: attention : suggest braces around empty body in an « if » statement [-Wempty-body] So let's replace emptyness by "do {} while(0)" Signed-off-by: Corentin Labbe <[email protected]> Acked-by: Arnd Bergmann <[email protected]> Signed-off-by: Dave Airlie <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-12-04agp: Add bridge parameter documentationCorentin Labbe1-0/+3
This patch add documentation about the bridge parameter in several function. This will fix the following build warning: drivers/char/agp/generic.c:220: warning: No description found for parameter 'bridge' drivers/char/agp/generic.c:364: warning: No description found for parameter 'bridge' drivers/char/agp/generic.c:1283: warning: No description found for parameter 'bridge' Signed-off-by: Corentin Labbe <[email protected]> Acked-by: Arnd Bergmann <[email protected]> Signed-off-by: Dave Airlie <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-12-04agp: remove unused variable num_segmentsCorentin Labbe1-2/+1
This patch fix the following build warning: warning: variable 'num_segments' set but not used [-Wunused-but-set-variable] Signed-off-by: Corentin Labbe <[email protected]> Acked-by: Arnd Bergmann <[email protected]> Signed-off-by: Dave Airlie <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-12-04agp: move AGPGART_MINOR to include/linux/miscdevice.hCorentin Labbe2-2/+1
This patch move the define for AGPGART_MINOR to include/linux/miscdevice.h. It is better that all minor number definitions are in the same place. Signed-off-by: Corentin Labbe <[email protected]> Acked-by: Arnd Bergmann <[email protected]> Signed-off-by: Dave Airlie <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-12-04agp: remove unused variable size in agp_generic_create_gatt_tableCorentin Labbe1-7/+2
This patch fix the following warning: drivers/char/agp/generic.c:853:6: attention : variable ‘size’ set but not used [-Wunused-but-set-variable] by removing the unused variable size in agp_generic_create_gatt_table Signed-off-by: Corentin Labbe <[email protected]> Acked-by: Arnd Bergmann <[email protected]> Signed-off-by: Dave Airlie <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-12-04Merge tag 'drm-next-5.5-2019-12-03' of ↵Dave Airlie31-303/+235
git://people.freedesktop.org/~agd5f/linux into drm-next drm-next-5.5-2019-12-03: amdgpu: - Fix vram lost handling with BACO on VI/CI asics - DC fixes for Navi14 - Misc gfx10 fixes - SR-IOV fixes - Fix driver unload - Fix XGMI limits on Arcturus amdkfd: - Enable KFD on PPC - Optimize KFD page table reservations radeon: - Fix register checker for r1xx/r2xx Signed-off-by: Dave Airlie <[email protected]> From: Alex Deucher <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-12-03xfs: fix mount failure crash on invalid iclog memory accessBrian Foster1-0/+2
syzbot (via KASAN) reports a use-after-free in the error path of xlog_alloc_log(). Specifically, the iclog freeing loop doesn't handle the case of a fully initialized ->l_iclog linked list. Instead, it assumes that the list is partially constructed and NULL terminated. This bug manifested because there was no possible error scenario after iclog list setup when the original code was added. Subsequent code and associated error conditions were added some time later, while the original error handling code was never updated. Fix up the error loop to terminate either on a NULL iclog or reaching the end of the list. Reported-by: [email protected] Signed-off-by: Brian Foster <[email protected]> Reviewed-by: Darrick J. Wong <[email protected]> Signed-off-by: Darrick J. Wong <[email protected]>
2019-12-03Merge tag 'tag-chrome-platform-for-v5.5' of ↵Linus Torvalds27-442/+1019
git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux Pull chrome platform changes from Benson Leung: "CrOS EC / MFD / IIO: - Contains tag-ib-chrome-mfd-iio-input-5.5, which is the first part of a series from Gwendal to refactor sensor code between MFD, CrOS EC, iio and input in order to add a new sensorhub driver and FIFO processing Wilco EC: - Add support for Dell's USB PowerShare policy control, keyboard backlight LED driver, and a new test_event file. - Fixes use after free in wilco_ec's telemetry driver. Misc: - bugfix in cros_usbpd_logger (missing destroy workqueue)" * tag 'tag-chrome-platform-for-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux: platform/chrome: wilco_ec: fix use after free issue platform/chrome: cros_ec: Add Kconfig default for cros-ec-sensorhub Revert "Input: cros_ec_keyb: mask out extra flags in event_type" Revert "Input: cros_ec_keyb - add back missing mask for event_type" platform/chrome: cros_ec: handle MKBP more events flag platform/chrome: cros_ec: Do not attempt to register a non-positive IRQ number platform/chrome: cros-ec: Record event timestamp in the hard irq mfd / platform / iio: cros_ec: Register sensor through sensorhub iio / platform: cros_ec: Add cros-ec-sensorhub driver mfd / platform: cros_ec: Add sensor_count and make check_features public platform/chrome: cros_ec: Put docs with the code platform/chrome: cros_usbpd_logger: add missed destroy_workqueue in remove platform/chrome: cros_ec: Fix Kconfig indentation platform/chrome: wilco_ec: Add keyboard backlight LED support platform/chrome: wilco_ec: Add charging config driver platform/chrome: wilco_ec: Add Dell's USB PowerShare Policy control platform/chrome: wilco_ec: Add debugfs test_event file
2019-12-03Merge tag 'spdx-5.5-rc1' of ↵Linus Torvalds4-2/+8
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx Pull SPDX fix from Greg KH: "Here is a single SPDX fixup for 5.5-rc1 It resolves an issue where we had missed a few .h files with the auto-tagging scripts because they had "GPL" text in strings within the file themselves. This single patch fixes up the issue and provides the proper SPDX tags at the top of them as needed. This patch has been in linux-next for many many weeks now with no reported issues" * tag 'spdx-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: export,module: add SPDX GPL-2.0 license identifier to headers with no license
2019-12-03Merge tag 'tty-5.5-rc1' of ↵Linus Torvalds49-715/+665
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial updates from Greg KH: "Here is the "big" tty and serial driver patches for 5.5-rc1. It's a bit later in the merge window than normal as I wanted to make sure some last-minute patches applied to it were all sane. They seem to be :) There's a lot of little stuff in here, for the tty core, and for lots of serial drivers: - reverts of uartlite serial driver patches that were wrong - msm-serial driver fixes - serial core updates and fixes - tty core fixes - serial driver dma mapping api changes - lots of other tiny fixes and updates for serial drivers All of these have been in linux-next for a while with no reported issues" * tag 'tty-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (58 commits) Revert "serial/8250: Add support for NI-Serial PXI/PXIe+485 devices" vcs: prevent write access to vcsu devices tty: vt: keyboard: reject invalid keycodes tty: don't crash in tty_init_dev when missing tty_port serial: stm32: fix clearing interrupt error flags tty: Fix Kconfig indentation, continued serial: serial_core: Perform NULL checks for break_ctl ops tty: remove unused argument from tty_open_by_driver() tty: Fix Kconfig indentation {tty: serial, nand: onenand}: samsung: rename to fix build warning serial: ifx6x60: add missed pm_runtime_disable serial: pl011: Fix DMA ->flush_buffer() Revert "serial-uartlite: Move the uart register" Revert "serial-uartlite: Add get serial id if not provided" Revert "serial-uartlite: Do not use static struct uart_driver out of probe()" Revert "serial-uartlite: Add runtime support" Revert "serial-uartlite: Change logic how console_port is setup" Revert "serial-uartlite: Use allocated structure instead of static ones" tty: serial: msm_serial: Use dma_request_chan() directly for channel request tty: serial: tegra: Use dma_request_chan() directly for channel request ...
2019-12-03Merge tag 'pci-v5.5-changes' of ↵Linus Torvalds152-2130/+2862
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Enumeration: - Warn if a host bridge has no NUMA info (Yunsheng Lin) - Add PCI_STD_NUM_BARS for the number of standard BARs (Denis Efremov) Resource management: - Fix boot-time Embedded Controller GPE storm caused by incorrect resource assignment after ACPI Bus Check Notification (Mika Westerberg) - Protect pci_reassign_bridge_resources() against concurrent addition/removal (Benjamin Herrenschmidt) - Fix bridge dma_ranges resource list cleanup (Rob Herring) - Add "pci=hpmmiosize" and "pci=hpmmioprefsize" parameters to control the MMIO and prefetchable MMIO window sizes of hotplug bridges independently (Nicholas Johnson) - Fix MMIO/MMIO_PREF window assignment that assigned more space than desired (Nicholas Johnson) - Only enforce bus numbers from bridge EA if the bridge has EA devices downstream (Subbaraya Sundeep) - Consolidate DT "dma-ranges" parsing and convert all host drivers to use shared parsing (Rob Herring) Error reporting: - Restore AER capability after resume (Mayurkumar Patel) - Add PoisonTLPBlocked AER counter (Rajat Jain) - Use for_each_set_bit() to simplify AER code (Andy Shevchenko) - Fix AER kernel-doc (Andy Shevchenko) - Add "pcie_ports=dpc-native" parameter to allow native use of DPC even if platform didn't grant control over AER (Olof Johansson) Hotplug: - Avoid returning prematurely from sysfs requests to enable or disable a PCIe hotplug slot (Lukas Wunner) - Don't disable interrupts twice when suspending hotplug ports (Mika Westerberg) - Fix deadlocks when PCIe ports are hot-removed while suspended (Mika Westerberg) Power management: - Remove unnecessary ASPM locking (Bjorn Helgaas) - Add support for disabling L1 PM Substates (Heiner Kallweit) - Allow re-enabling Clock PM after it has been disabled (Heiner Kallweit) - Add sysfs attributes for controlling ASPM link states (Heiner Kallweit) - Remove CONFIG_PCIEASPM_DEBUG, including "link_state" and "clk_ctl" sysfs files (Heiner Kallweit) - Avoid AMD FCH XHCI USB PME# from D0 defect that prevents wakeup on USB 2.0 or 1.1 connect events (Kai-Heng Feng) - Move power state check out of pci_msi_supported() (Bjorn Helgaas) - Fix incorrect MSI-X masking on resume and revert related nvme quirk for Kingston NVME SSD running FW E8FK11.T (Jian-Hong Pan) - Always return devices to D0 when thawing to fix hibernation with drivers like mlx4 that used legacy power management (previously we only did it for drivers with new power management ops) (Dexuan Cui) - Clear PCIe PME Status even for legacy power management (Bjorn Helgaas) - Fix PCI PM documentation errors (Bjorn Helgaas) - Use dev_printk() for more power management messages (Bjorn Helgaas) - Apply D2 delay as milliseconds, not microseconds (Bjorn Helgaas) - Convert xen-platform from legacy to generic power management (Bjorn Helgaas) - Removed unused .resume_early() and .suspend_late() legacy power management hooks (Bjorn Helgaas) - Rearrange power management code for clarity (Rafael J. Wysocki) - Decode power states more clearly ("4" or "D4" really refers to "D3cold") (Bjorn Helgaas) - Notice when reading PM Control register returns an error (~0) instead of interpreting it as being in D3hot (Bjorn Helgaas) - Add missing link delays required by the PCIe spec (Mika Westerberg) Virtualization: - Move pci_prg_resp_pasid_required() to CONFIG_PCI_PRI (Bjorn Helgaas) - Allow VFs to use PRI (the PF PRI is shared by the VFs, but the code previously didn't recognize that) (Kuppuswamy Sathyanarayanan) - Allow VFs to use PASID (the PF PASID capability is shared by the VFs, but the code previously didn't recognize that) (Kuppuswamy Sathyanarayanan) - Disconnect PF and VF ATS enablement, since ATS in PFs and associated VFs can be enabled independently (Kuppuswamy Sathyanarayanan) - Cache PRI and PASID capability offsets (Kuppuswamy Sathyanarayanan) - Cache the PRI PRG Response PASID Required bit (Bjorn Helgaas) - Consolidate ATS declarations in linux/pci-ats.h (Krzysztof Wilczynski) - Remove unused PRI and PASID stubs (Bjorn Helgaas) - Removed unnecessary EXPORT_SYMBOL_GPL() from ATS, PRI, and PASID interfaces that are only used by built-in IOMMU drivers (Bjorn Helgaas) - Hide PRI and PASID state restoration functions used only inside the PCI core (Bjorn Helgaas) - Add a DMA alias quirk for the Intel VCA NTB (Slawomir Pawlowski) - Serialize sysfs sriov_numvfs reads vs writes (Pierre Crégut) - Update Cavium ACS quirk for ThunderX2 and ThunderX3 (George Cherian) - Fix the UPDCR register address in the Intel ACS quirk (Steffen Liebergeld) - Unify ACS quirk implementations (Bjorn Helgaas) Amlogic Meson host bridge driver: - Fix meson PERST# GPIO polarity problem (Remi Pommarel) - Add DT bindings for Amlogic Meson G12A (Neil Armstrong) - Fix meson clock names to match DT bindings (Neil Armstrong) - Add meson support for Amlogic G12A SoC with separate shared PHY (Neil Armstrong) - Add meson extended PCIe PHY functions for Amlogic G12A USB3+PCIe combo PHY (Neil Armstrong) - Add arm64 DT for Amlogic G12A PCIe controller node (Neil Armstrong) - Add commented-out description of VIM3 USB3/PCIe mux in arm64 DT (Neil Armstrong) Broadcom iProc host bridge driver: - Invalidate iProc PAXB address mapping before programming it (Abhishek Shah) - Fix iproc-msi and mvebu __iomem annotations (Ben Dooks) Cadence host bridge driver: - Refactor Cadence PCIe host controller to use as a library for both host and endpoint (Tom Joseph) Freescale Layerscape host bridge driver: - Add layerscape LS1028a support (Xiaowei Bao) Intel VMD host bridge driver: - Add VMD bus 224-255 restriction decode (Jon Derrick) - Add VMD 8086:9A0B device ID (Jon Derrick) - Remove Keith from VMD maintainer list (Keith Busch) Marvell ARMADA 3700 / Aardvark host bridge driver: - Use LTSSM state to build link training flag since Aardvark doesn't implement the Link Training bit (Remi Pommarel) - Delay before training Aardvark link in case PERST# was asserted before the driver probe (Remi Pommarel) - Fix Aardvark issues with Root Control reads and writes (Remi Pommarel) - Don't rely on jiffies in Aardvark config access path since interrupts may be disabled (Remi Pommarel) - Fix Aardvark big-endian support (Grzegorz Jaszczyk) Marvell ARMADA 370 / XP host bridge driver: - Make mvebu_pci_bridge_emul_ops static (Ben Dooks) Microsoft Hyper-V host bridge driver: - Add hibernation support for Hyper-V virtual PCI devices (Dexuan Cui) - Track Hyper-V pci_protocol_version per-hbus, not globally (Dexuan Cui) - Avoid kmemleak false positive on hv hbus buffer (Dexuan Cui) Mobiveil host bridge driver: - Change mobiveil csr_read()/write() function names that conflict with riscv arch functions (Kefeng Wang) NVIDIA Tegra host bridge driver: - Fix Tegra CLKREQ dependency programming (Vidya Sagar) Renesas R-Car host bridge driver: - Remove unnecessary header include from rcar (Andrew Murray) - Tighten register index checking for rcar inbound range programming (Marek Vasut) - Fix rcar inbound range alignment calculation to improve packing of multiple entries (Marek Vasut) - Update rcar MACCTLR setting to match documentation (Yoshihiro Shimoda) - Clear bit 0 of MACCTLR before PCIETCTLR.CFINIT per manual (Yoshihiro Shimoda) - Add Marek Vasut and Yoshihiro Shimoda as R-Car maintainers (Simon Horman) Rockchip host bridge driver: - Make rockchip 0V9 and 1V8 power regulators non-optional (Robin Murphy) Socionext UniPhier host bridge driver: - Set uniphier to host (RC) mode always (Kunihiko Hayashi) Endpoint drivers: - Fix endpoint driver sign extension problem when shifting page number to phys_addr_t (Alan Mikhak) Misc: - Add NumaChip SPDX header (Krzysztof Wilczynski) - Replace EXTRA_CFLAGS with ccflags-y (Krzysztof Wilczynski) - Remove unused includes (Krzysztof Wilczynski) - Removed unused sysfs attribute groups (Ben Dooks) - Remove PTM and ASPM dependencies on PCIEPORTBUS (Bjorn Helgaas) - Add PCIe Link Control 2 register field definitions to replace magic numbers in AMDGPU and Radeon CIK/SI (Bjorn Helgaas) - Fix incorrect Link Control 2 Transmit Margin usage in AMDGPU and Radeon CIK/SI PCIe Gen3 link training (Bjorn Helgaas) - Use pcie_capability_read_word() instead of pci_read_config_word() in AMDGPU and Radeon CIK/SI (Frederick Lawler) - Remove unused pci_irq_get_node() Greg Kroah-Hartman) - Make asm/msi.h mandatory and simplify PCI_MSI_IRQ_DOMAIN Kconfig (Palmer Dabbelt, Michal Simek) - Read all 64 bits of Switchtec part_event_bitmap (Logan Gunthorpe) - Fix erroneous intel-iommu dependency on CONFIG_AMD_IOMMU (Bjorn Helgaas) - Fix bridge emulation big-endian support (Grzegorz Jaszczyk) - Fix dwc find_next_bit() usage (Niklas Cassel) - Fix pcitest.c fd leak (Hewenliang) - Fix typos and comments (Bjorn Helgaas) - Fix Kconfig whitespace errors (Krzysztof Kozlowski)" * tag 'pci-v5.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (160 commits) PCI: Remove PCI_MSI_IRQ_DOMAIN architecture whitelist asm-generic: Make msi.h a mandatory include/asm header Revert "nvme: Add quirk for Kingston NVME SSD running FW E8FK11.T" PCI/MSI: Fix incorrect MSI-X masking on resume PCI/MSI: Move power state check out of pci_msi_supported() PCI/MSI: Remove unused pci_irq_get_node() PCI: hv: Avoid a kmemleak false positive caused by the hbus buffer PCI: hv: Change pci_protocol_version to per-hbus PCI: hv: Add hibernation support PCI: hv: Reorganize the code in preparation of hibernation MAINTAINERS: Remove Keith from VMD maintainer PCI/ASPM: Remove PCIEASPM_DEBUG Kconfig option and related code PCI/ASPM: Add sysfs attributes for controlling ASPM link states PCI: Fix indentation drm/radeon: Prefer pcie_capability_read_word() drm/radeon: Replace numbers with PCI_EXP_LNKCTL2 definitions drm/radeon: Correct Transmit Margin masks drm/amdgpu: Prefer pcie_capability_read_word() PCI: uniphier: Set mode register to host mode drm/amdgpu: Replace numbers with PCI_EXP_LNKCTL2 definitions ...
2019-12-03Merge tag 'rtc-5.5' of ↵Linus Torvalds72-678/+566
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC updates from Alexandre Belloni: "A lot of unnecessary code removal in here that ends up decreasing the number of lines in the subsystem. The ds1343 and ds1347 drivers got cleaned up. The rest are the usual fixes and new features. Subsystem: - fix warnings and errors with make W=1 - UIE are now disabled while setting the RTC time - UIE are now disallowed when the RTC time is not set. Drivers: - remove unecessary .remove callbacks - Set RTC range for cros-ec, ds1343, ds1347, m41t80, s35390a, vt8500 - Use devm_platform_ioremap_resource where applicable - rv3028: add clock out support" * tag 'rtc-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (81 commits) rtc: Fix Kconfig indentation rtc: xgene: Remove unused struct device in struct xgene_rtc_dev rtc: sun6i: Remove struct device from sun6i_rtc_dev rtc: st-lpc: Remove struct resource from struct st_rtc rtc: pcf8523: Remove struct pcf8523 rtc: meson: remove redundant assignment to variable retries rtc: v3020: remove set but unused variable rtc: tegra: remove set but unused variable rtc: pm8xxx: update kerneldoc for struct pm8xxx_rtc rtc: m41t80: remove excess kerneldoc rtc: ds1685: fix build error with make W=1 rtc: ds1685: remove set but unused variables rtc: ds1374: remove unused variable rtc: sysfs: fix hctosys_show kerneldoc rtc: interface: fix kerneldoc comments rtc: msm6242: Remove unneeded msm6242_set()/msm6242_clear() functions rtc: msm6242: Fix reading of 10-hour digit rtc: tps65910: allow using RTC without alarm interrupt rtc: fsl-ftm-alarm: remove select FSL_RCPM and default y from Kconfig rtc: pcf8563: Constify clkout_rates ...
2019-12-03drm/dp_mst: Fix build on systems with STACKTRACE_SUPPORT=nGuenter Roeck1-0/+1
On systems with STACKTRACE_SUPPORT=n, we get: WARNING: unmet direct dependencies detected for STACKTRACE Depends on [n]: STACKTRACE_SUPPORT Selected by [y]: - STACKDEPOT [=y] and build errors such as: m68k-linux-ld: kernel/stacktrace.o: in function `stack_trace_save': (.text+0x11c): undefined reference to `save_stack_trace' Add the missing deendency on STACKTRACE_SUPPORT. Fixes: 12a280c72868 ("drm/dp_mst: Add topology ref history tracking for debugging") Cc: Lyude Paul <[email protected]> Cc: Sean Paul <[email protected]> Signed-off-by: Guenter Roeck <[email protected]> Signed-off-by: Lyude Paul <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-12-03Merge tag 'iomap-5.5-merge-13' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds1-17/+22
Pull iomap cleanups from Darrick Wong: "Aome more new iomap code for 5.5. There's not much this time -- just removing some local variables that don't need to exist in the iomap directio code" * tag 'iomap-5.5-merge-13' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: iomap: remove unneeded variable in iomap_dio_rw() iomap: Do not create fake iter in iomap_dio_bio_actor()
2019-12-03xen/blkback: Avoid unmapping unmapped grant pagesSeongJae Park1-0/+2
For each I/O request, blkback first maps the foreign pages for the request to its local pages. If an allocation of a local page for the mapping fails, it should unmap every mapping already made for the request. However, blkback's handling mechanism for the allocation failure does not mark the remaining foreign pages as unmapped. Therefore, the unmap function merely tries to unmap every valid grant page for the request, including the pages not mapped due to the allocation failure. On a system that fails the allocation frequently, this problem leads to following kernel crash. [ 372.012538] BUG: unable to handle kernel NULL pointer dereference at 0000000000000001 [ 372.012546] IP: [<ffffffff814071ac>] gnttab_unmap_refs.part.7+0x1c/0x40 [ 372.012557] PGD 16f3e9067 PUD 16426e067 PMD 0 [ 372.012562] Oops: 0002 [#1] SMP [ 372.012566] Modules linked in: act_police sch_ingress cls_u32 ... [ 372.012746] Call Trace: [ 372.012752] [<ffffffff81407204>] gnttab_unmap_refs+0x34/0x40 [ 372.012759] [<ffffffffa0335ae3>] xen_blkbk_unmap+0x83/0x150 [xen_blkback] ... [ 372.012802] [<ffffffffa0336c50>] dispatch_rw_block_io+0x970/0x980 [xen_blkback] ... Decompressing Linux... Parsing ELF... done. Booting the kernel. [ 0.000000] Initializing cgroup subsys cpuset This commit fixes this problem by marking the grant pages of the given request that didn't mapped due to the allocation failure as invalid. Fixes: c6cc142dac52 ("xen-blkback: use balloon pages for all mappings") Reviewed-by: David Woodhouse <[email protected]> Reviewed-by: Maximilian Heyne <[email protected]> Reviewed-by: Paul Durrant <[email protected]> Reviewed-by: Roger Pau Monné <[email protected]> Signed-off-by: SeongJae Park <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.