aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2013-03-12mfd: ab8500: Kill "reg" property from bindingArnd Bergmann5-10/+5
The ab8500 device is a child of the prcmu device, which is a memory mapped bus device, whose children are addressable using physical memory addresses, not using mailboxes, so a mailbox number in the ab8500 node cannot be parsed by DT. Nothing uses this number, since it was only introduced as part of the failed attempt to clean up prcmu mailbox handling, and we can simply remove it. Signed-off-by: Arnd Bergmann <[email protected]> Signed-off-by: Samuel Ortiz <[email protected]>
2013-03-12mfd: ab8500-gpadc: Complain if we fail to enable vtvout LDOAxel Lin1-4/+13
Since commit c8801a8e "regulator: core: Mark all get and enable calls as __must_check", we must check return value of regulator_enable() to silence below build warning. CC drivers/mfd/ab8500-gpadc.o drivers/mfd/ab8500-gpadc.c: In function 'ab8500_gpadc_runtime_resume': drivers/mfd/ab8500-gpadc.c:598:18: warning: ignoring return value of 'regulator_enable', declared with attribute warn_unused_result [-Wunused-result] drivers/mfd/ab8500-gpadc.c: In function 'ab8500_gpadc_probe': drivers/mfd/ab8500-gpadc.c:655:18: warning: ignoring return value of 'regulator_enable', declared with attribute warn_unused_result [-Wunused-result] Also convert to devm_regulator_get(), this fixes a missing regulator_put() call in ab8500_gpadc_remove(). Signed-off-by: Axel Lin <[email protected]> Signed-off-by: Samuel Ortiz <[email protected]>
2013-03-12mfd: wm831x: Don't forward declare enum wm831x_auxadcMark Brown2-1/+3
We can't forward declare enums. Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Samuel Ortiz <[email protected]>
2013-03-12mfd: twl4030-audio: Fix argument type for twl4030_audio_disable_resource()Mark Brown1-1/+1
Looks like the conversion to enum was missed for the definition of this function, the declaration has been updated. Signed-off-by: Mark Brown <[email protected]> Acked-by: Peter Ujfalusi <[email protected]> Signed-off-by: Samuel Ortiz <[email protected]>
2013-03-12mfd: tps65912: Declare and use tps65912_irq_exit()Mark Brown2-0/+2
Clean up interrupts on exit, silencing a sparse warning caused by tps65912_irq_exit() being defined but not prototyped as we go. Signed-off-by: Mark Brown <[email protected]> Signed-off-by: Samuel Ortiz <[email protected]>
2013-03-12mfd: palmas: Provide irq flags through DT/platform dataLaxman Dewangan2-3/+34
Currently driver sets the irq type to IRQF_TRIGGER_LOW which is causing interrupt registration failure in ARM based SoCs as: [ 0.208479] genirq: Setting trigger mode 8 for irq 118 failed (gic_set_type+0x0/0xf0) [ 0.208513] dummy 0-0059: Failed to request IRQ 118: -22 Provide the irq flags through platform data if device is registered through board file or get the irq type from DT node property in place of hardcoding the irq flag in driver to support multiple platforms. Also configure the device to generate the interrupt signal according to flag type. Signed-off-by: Laxman Dewangan <[email protected]> Signed-off-by: Samuel Ortiz <[email protected]>
2013-03-12mfd: Make AB8500_CORE select POWER_SUPPLY to fix build errorAxel Lin1-0/+1
This patch fixes below build error when CONFIG_POWER_SUPPLY is not set. drivers/built-in.o: In function `ab8500_power_off': drivers/mfd/ab8500-sysctrl.c:37: undefined reference to `power_supply_get_by_name' drivers/mfd/ab8500-sysctrl.c:53: undefined reference to `power_supply_get_by_name' make: *** [vmlinux] Error 1 Signed-off-by: Axel Lin <[email protected]> Acked-by: Lee Jones <[email protected]> Signed-off-by: Samuel Ortiz <[email protected]>
2013-03-12mfd: omap-usb-host: Actually update hostconfigRoger Quadros1-3/+3
The helper functions omap_usbhs_rev1_hostconfig() and omap_usbhs_rev2_hostconfig() don't write into the hostconfig register. Make sure that we write the return value into the hostconfig register. Signed-off-by: Roger Quadros <[email protected]> Signed-off-by: Samuel Ortiz <[email protected]>
2013-03-12ALSA: usb-audio: add a workaround for the NuForce UDH-100Clemens Ladisch1-0/+15
The NuForce UDH-100 numbers its interfaces incorrectly, which makes the interface associations come out wrong, which results in the driver erroring out with the message "Audio class v2 interfaces need an interface association". Work around this by searching for the interface association descriptor also in some other place where it might have ended up. Reported-and-tested-by: Dave Helstroom <[email protected]> Signed-off-by: Clemens Ladisch <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2013-03-12ALSA: asihpi - fix potential NULL pointer dereferenceWei Yongjun1-1/+2
The dereference should be moved below the NULL test. Signed-off-by: Wei Yongjun <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2013-03-12keys: fix race with concurrent install_user_keyrings()David Howells1-1/+1
This fixes CVE-2013-1792. There is a race in install_user_keyrings() that can cause a NULL pointer dereference when called concurrently for the same user if the uid and uid-session keyrings are not yet created. It might be possible for an unprivileged user to trigger this by calling keyctl() from userspace in parallel immediately after logging in. Assume that we have two threads both executing lookup_user_key(), both looking for KEY_SPEC_USER_SESSION_KEYRING. THREAD A THREAD B =============================== =============================== ==>call install_user_keyrings(); if (!cred->user->session_keyring) ==>call install_user_keyrings() ... user->uid_keyring = uid_keyring; if (user->uid_keyring) return 0; <== key = cred->user->session_keyring [== NULL] user->session_keyring = session_keyring; atomic_inc(&key->usage); [oops] At the point thread A dereferences cred->user->session_keyring, thread B hasn't updated user->session_keyring yet, but thread A assumes it is populated because install_user_keyrings() returned ok. The race window is really small but can be exploited if, for example, thread B is interrupted or preempted after initializing uid_keyring, but before doing setting session_keyring. This couldn't be reproduced on a stock kernel. However, after placing systemtap probe on 'user->session_keyring = session_keyring;' that introduced some delay, the kernel could be crashed reliably. Fix this by checking both pointers before deciding whether to return. Alternatively, the test could be done away with entirely as it is checked inside the mutex - but since the mutex is global, that may not be the best way. Signed-off-by: David Howells <[email protected]> Reported-by: Mateusz Guzik <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: James Morris <[email protected]>
2013-03-11libceph: fix decoding of pgidsSage Weil1-13/+29
In 4f6a7e5ee1393ec4b243b39dac9f36992d161540 we effectively dropped support for the legacy encoding for the OSDMap and incremental. However, we didn't fix the decoding for the pgid. Signed-off-by: Sage Weil <[email protected]> Reviewed-by: Yehuda Sadeh <[email protected]>
2013-03-11reiserfs: Use kstrdup instead of kmalloc/strcpyIonut-Gabriel Radu1-3/+1
Signed-off-by: Ionut-Gabriel Radu <[email protected]> Signed-off-by: Jan Kara <[email protected]>
2013-03-11ext3: Fix format string issuesLars-Peter Clausen1-2/+2
ext3_msg() takes the printk prefix as the second parameter and the format string as the third parameter. Two callers of ext3_msg omit the prefix and pass the format string as the second parameter and the first parameter to the format string as the third parameter. In both cases this string comes from an arbitrary source. Which means the string may contain format string characters, which will lead to undefined and potentially harmful behavior. The issue was introduced in commit 4cf46b67eb("ext3: Unify log messages in ext3") and is fixed by this patch. CC: [email protected] Signed-off-by: Lars-Peter Clausen <[email protected]> Signed-off-by: Jan Kara <[email protected]>
2013-03-11quota: add missing use of dq_data_lock in __dquot_initializeJeff Mahoney1-1/+4
The bulk of __dquot_initialize runs under the dqptr_sem which protects the inode->i_dquot pointers. It doesn't protect the dereferenced contents, though. Those are protected by the dq_data_lock, which is missing around the dquot_resv_space call. Signed-off-by: Jeff Mahoney <[email protected]> Signed-off-by: Jan Kara <[email protected]>
2013-03-11Arm: socfpga: pl330: Add #dma-cells for generic dma binding supportPadmavathi Venna1-0/+3
This patch adds #dma-cells property to PL330 DMA controller nodes for supporting generic dma dt bindings on SOCFPGA platform. #dma-channels and #dma-requests are not required now but added in advance. Signed-off-by: Padmavathi Venna <[email protected]> Signed-off-by: Arnd Bergmann <[email protected]>
2013-03-11Merge tag 'mvebu_fixes_for_v3.9' of ↵Arnd Bergmann27-40/+75
git://git.infradead.org/users/jcooper/linux into fixes mvebu fixes for v3.9 from Jason Cooper <[email protected]>: The first four patches: 89c58c1 rtc: rtc-mv: Add support for clk to avoid lockups de88747 gpio: mvebu: Add clk support to prevent lockup 7bf5b40 ARM: kirkwood: fix to retain gbe MAC addresses for DT kernels 93fff4c ARM: kirkwood: of_serial: fix clock gating by removing clock-frequency are Cc'd to stable since they were held over from the previous merge window. The rest are a small collection of fixes and a couple of devicetree conversion catchups. * tag 'mvebu_fixes_for_v3.9' of git://git.infradead.org/users/jcooper/linux: arm: mach-orion5x: fix typo in compatible string of a .dts file arm: mvebu: fix address-cells in mpic DT node arm: plat-orion: fix address decoding when > 4GB is used arm: mvebu: Reduce reg-io-width with UARTs ARM: Dove: add RTC device node arm: mvebu: enable the USB ports on Armada 370 Reference Design board ARM: dove: drop "select COMMON_CLK_DOVE" rtc: rtc-mv: Add support for clk to avoid lockups gpio: mvebu: Add clk support to prevent lockup ARM: kirkwood: fix to retain gbe MAC addresses for DT kernels ARM: kirkwood: of_serial: fix clock gating by removing clock-frequency Signed-off-by: Arnd Bergmann <[email protected]>
2013-03-11Merge tag 'imx-fixes-3.9-2' of ↵Arnd Bergmann2-2/+2
git://git.linaro.org/people/shawnguo/linux-2.6 into fixes From Shawn Guo <[email protected]>: The 2nd take of imx fixes for 3.9: - Fix pll1_sys clk initial status - Fix a typo in imx DEBUG_LL Kconfig * tag 'imx-fixes-3.9-2' of git://git.linaro.org/people/shawnguo/linux-2.6: ARM: imx: fix typo "DEBUG_IMX50_IMX53_UART" ARM: imx: pll1_sys should be an initial on clk Signed-off-by: Arnd Bergmann <[email protected]>
2013-03-11Merge tag 'mxs-fixes-3.9-2' of ↵Arnd Bergmann1-5/+5
git://git.linaro.org/people/shawnguo/linux-2.6 into fixes From Shawn Guo <[email protected]>: The 2nd mxs fixes for 3.9: - Fix an error caused by incorrect conflict resolution when applying the patch * tag 'mxs-fixes-3.9-2' of git://git.linaro.org/people/shawnguo/linux-2.6: ARM: mxs: cfa10049: Fix fb initialisation function Signed-off-by: Arnd Bergmann <[email protected]>
2013-03-11ARM: multiplatform: Sort the max gpio numbers.Maxime Ripard1-2/+5
When building a multiplatform kernel, we could end up with a smaller number of GPIOs than the one required by the platform the kernel was running on. Sort the max GPIO number by descending order so that we always take the highest number required. Signed-off-by: Maxime Ripard <[email protected]> Signed-off-by: Arnd Bergmann <[email protected]>
2013-03-11qcaux: add Franklin U600Dan Williams1-0/+1
4 ports; AT/PPP is standard CDC-ACM. The other three (added by this patch) are QCDM/DIAG, possibly GPS, and unknown. Signed-off-by: Dan Williams <[email protected]> Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2013-03-11usb: musb: core: fix possible build error with randconfigFelipe Balbi1-4/+0
when making commit e574d57 (usb: musb: fix compile warning) I forgot to git add this part of the patch which ended up introducing a possible build error. Signed-off-by: Felipe Balbi <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2013-03-11xen/acpi: remove redundant acpi/acpi_drivers.h includeLiu Jinsong1-1/+0
It's redundant since linux/acpi.h has include it when CONFIG_ACPI enabled, and when CONFIG_ACPI disabled it will trigger compiling warning In file included from drivers/xen/xen-stub.c:28:0: include/acpi/acpi_drivers.h:103:31: warning: 'struct acpi_device' declared inside parameter list [enabled by default] include/acpi/acpi_drivers.h:103:31: warning: its scope is only this definition or declaration, which is probably not what you want [enabled by default] include/acpi/acpi_drivers.h:107:43: warning: 'struct acpi_pci_root' declared inside parameter list [enabled by default] Reported-by: Wu Fengguang <[email protected]> Signed-off-by: Liu Jinsong <[email protected]> Signed-off-by: Konrad Rzeszutek Wilk <[email protected]>
2013-03-11xen: arm: mandate EABI and use generic atomic operations.Ian Campbell2-22/+6
Rob Herring has observed that c81611c4e96f "xen: event channel arrays are xen_ulong_t and not unsigned long" introduced a compile failure when building without CONFIG_AEABI: /tmp/ccJaIZOW.s: Assembler messages: /tmp/ccJaIZOW.s:831: Error: even register required -- `ldrexd r5,r6,[r4]' Will Deacon pointed out that this is because OABI does not require even base registers for 64-bit values. We can avoid this by simply using the existing atomic64_xchg operation and the same containerof trick as used by the cmpxchg macros. However since this code is used on memory which is shared with the hypervisor we require proper atomic instructions and cannot use the generic atomic64 callbacks (which are based on spinlocks), therefore add a dependency on !GENERIC_ATOMIC64. Since we already depend on !CPU_V6 there isn't much downside to this. While thinking about this we also observed that OABI has different struct alignment requirements to EABI, which is a problem for hypercall argument structs which are shared with the hypervisor and which must be in EABI layout. Since I don't expect people to want to run OABI kernels on Xen depend on CONFIG_AEABI explicitly too (although it also happens to be enforced by the !GENERIC_ATOMIC64 requirement too). Signed-off-by: Ian Campbell <[email protected]> Cc: Will Deacon <[email protected]> Cc: Rob Herring <[email protected]> Acked-by: Stefano Stabellini <[email protected]> Cc: Konrad Rzeszutek Wilk <[email protected]> Signed-off-by: Konrad Rzeszutek Wilk <[email protected]>
2013-03-11staging: comedi: dt9812: use CR_CHAN() for channel numberIan Abbott1-6/+10
As pointed out by Dan Carpenper in <http://driverdev.linuxdriverproject.org/pipermail/devel/2013-February/036025.html>, the dt9812 comedi driver's use of the `chanspec` member of `struct comedi_insn` as a channel number is incorrect. Change it to use `CR_CHAN(insn->chanspec)` as the channel number (where `insn` is a pointer to the `struct comedi_insn` being processed). Reported-by: Dan Carpenter <[email protected]> Cc: stable <[email protected]> # 3.8 onwards Cc: Anders Blomdell <[email protected]> Signed-off-by: Ian Abbott <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2013-03-11staging/vt6656: Fix too large integer constant warning on 32-bitGeert Uytterhoeven1-1/+1
drivers/staging/vt6656/card.c: In function ‘CARDqGetNextTBTT’: drivers/staging/vt6656/card.c:793: warning: integer constant is too large for ‘unsigned long’ type Commit c7b7cad0d8df823ea063c86a54316bbcbfa04a7c ("staging/vt6656: Fix sparse warning constant 0xffffffff00000000U is so big it is unsigned long") changed the constant to "0xffffffff00000000UL", but that only works on 64-bit. Change it "0xffffffff00000000ULL" to fix it for 32-bit, too. Signed-off-by: Geert Uytterhoeven <[email protected]> Reviewed-by: Peter Huewe <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2013-03-11staging: comedi: drivers: usbduxsigma.c: fix DMA buffers on stackKumar Amit Mehta1-10/+17
This patch fixes an instance of DMA buffer on stack(being passed to usb_control_msg)for the USB-DUXsigma Board driver. Found using smatch. Signed-off-by: Kumar Amit Mehta <[email protected]> Reviewed-by: Dan Carpenter <[email protected]> Reviewed-by: Ian Abbott <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2013-03-11staging: imx/drm: request irq only after adding the crtcPhilipp Zabel1-11/+12
If the bootloader already enabled the display, the interrupt handler will be called as soon as it is registered. If the CRTC is not already added at this time, the call to imx_drm_handle_vblank will result in a NULL pointer dereference. The patch fixes a kernel panic [1], which has been on linux-next since Jan 8 [2]. [1] http://thread.gmane.org/gmane.linux.ports.arm.kernel/218858 [2] http://thread.gmane.org/gmane.linux.ports.arm.kernel/208192 Signed-off-by: Philipp Zabel <[email protected]> Tested-by: Shawn Guo <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2013-03-11staging: comedi: drivers: usbduxfast.c: fix for DMA buffers on stackKumar Amit Mehta1-12/+18
fix for instances of DMA buffer on stack(being passed to usb_control_msg) for the USB-DUXfast Board driver. Signed-off-by: Kumar Amit Mehta <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2013-03-11staging: comedi: drivers: usbdux.c: fix DMA buffers on stackKumar Amit Mehta1-12/+19
fix for instances of DMA buffer on stack(being passed to usb_control_msg) for the USB-DUX-D Board driver. Signed-off-by: Kumar Amit Mehta <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2013-03-11staging: vt6656: Fix oops on resume from suspend.Malcolm Priestley1-4/+0
Remove usb_put_dev from vt6656_suspend and usb_get_dev from vt6566_resume. These are not normally in suspend/resume functions. Signed-off-by: Malcolm Priestley <[email protected]> Cc: [email protected] # 3.0+ Signed-off-by: Greg Kroah-Hartman <[email protected]>
2013-03-11usb: cp210x new Vendor/Device IDsMatwey V. Kornilov1-0/+19
This patch adds support for the Lake Shore Cryotronics devices to the CP210x driver. These lines are ported from cp210x driver distributed by Lake Shore web site: http://www.lakeshore.com/Documents/Lake%20Shore%20cp210x-3.0.0.tar.gz and licensed under the terms of GPLv2. Moreover, I've tested this changes with Lake Shore 335 in my labs. Signed-off-by: Matwey V. Kornilov <[email protected]> Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2013-03-11Merge tag 'fixes-for-v3.9-rc3' of ↵Greg Kroah-Hartman7-19/+19
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus Felipe writes: usb: fixes for v3.9-rc3 Most fixes are on 'musb' driver. There's a sparse warning fix which marks omap2430_glue as static, a build warning fix which was found with randconfig, a fix for omap_musb_mailbox check and removal of 'select' from musb's Kconfig to prevent Kconfig warnings. Other than that, pxa25x got a fix which was introduced by the latest conversion to udc_start/udc_stop patchset, kernel-doc warnings for composite layer and dwc3 got a build fix on sparc64. Signed-off-by: Greg Kroah-Hartman <[email protected]>
2013-03-11Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds4-14/+40
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "Misc minor fixes mostly related to tracing" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: s390: Fix a header dependencies related build error tracing: update documentation of snapshot utility tracing: Do not return EINVAL in snapshot when not allocated tracing: Add help of snapshot feature when snapshot is empty ftrace: Update the kconfig for DYNAMIC_FTRACE
2013-03-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds84-696/+843
Pull networking fixes from David Miller: 1) Missing cancel of work items in mac80211 MLME, from Ben Greear. 2) Fix DMA mapping handling in iwlwifi by using coherent DMA for command headers, from Johannes Berg. 3) Decrease the amount of pressure on the page allocator by using order 1 pages less in iwlwifi, from Emmanuel Grumbach. 4) Fix mesh PS broadcast OOPS in mac80211, from Marco Porsch. 5) Don't forget to recalculate idle state in mac80211 monitor interface, from Felix Fietkau. 6) Fix varargs in netfilter conntrack handler, from Joe Perches. 7) Need to reset entire chip when command queue fills up in iwlwifi, from Emmanuel Grumbach. 8) The TX antenna value must be valid when calibrations are performed in iwlwifi, fix from Dor Shaish. 9) Don't generate netfilter audit log entries when audit is disabled, from Gao Feng. 10) Deal with DMA unit hang on e1000e during power state transitions, from Bruce Allan. 11) Remove BUILD_BUG_ON check from igb driver, from Alexander Duyck. 12) Fix lockdep warning on i2c handling of igb driver, from Carolyn Wyborny. 13) Fix several TTY handling issues in IRDA ircomm tty driver, from Peter Hurley. 14) Several QFQ packet scheduler fixes from Paolo Valente. 15) When VXLAN encapsulates on transmit, we have to reset the netfilter state. From Zang MingJie. 16) Fix jiffie check in net_rx_action() so that we really cap the processing at 2HZ. From Eric Dumazet. 17) Fix erroneous trigger of IP option space exhaustion, when routers are pre-specified and we are looking to see if we can insert a timestamp, we will have the space. From David Ward. 18) Fix various issues in benet driver wrt waiting for firmware to finish POST after resets or errors. From Gavin Shan and Sathya Perla. 19) Fix TX locking in SFC driver, from Ben Hutchings. 20) Like the VXLAN fix above, when we encap in a TUN device we have to reset the netfilter state. This should fix several strange crashes reported by Dave Jones and others. From Eric Dumazet. 21) Don't forget to clean up MAC address resources when shutting down a port in mlx4 driver, from Yan Burman. 22) Fix divide by zero in vmxnet3 driver, from Bhavesh Davda. 23) Fix device statistic regression in tg3 when the driver is using phylib, from Nithin Sujir. 24) Fix info leak in several netlink handlers, from Mathias Krause. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (79 commits) 6lowpan: Fix endianness issue in is_addr_link_local(). rrunner.c: fix possible memory leak in rr_init_one() dcbnl: fix various netlink info leaks rtnl: fix info leak on RTM_GETLINK request for VF devices bridge: fix mdb info leaks tg3: Update link_up flag for phylib devices ipv6: stop multicast forwarding to process interface scoped addresses bridging: fix rx_handlers return code netlabel: fix build problems when CONFIG_IPV6=n drivers/isdn: checkng length to be sure not memory overflow net/rds: zero last byte for strncpy bnx2x: Fix SFP+ misconfiguration in iSCSI boot scenario bnx2x: Fix intermittent long KR2 link up time macvlan: Set IFF_UNICAST_FLT flag to prevent unnecessary promisc mode. team: unsyc the devices addresses when port is removed bridge: add missing vid to br_mdb_get() Fix: sparse warning in inet_csk_prepare_forced_close afkey: fix a typo MAINTAINERS: Update qlcnic maintainers list netlabel: correctly list all the static label mappings ...
2013-03-11Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/umlLinus Torvalds11-41/+42
Pull UML fixes from Richard Weinberger: "This update brings various fixes. Nothing special... In my local queue I have some more fixes which will be sent later to you. 3.9 uncovered strange UML issues. :(" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml: um: Use tty_port in SIGWINCH handler um: Use tty_port_operations->destruct um: fix build failure due to mess-up of sig_info protorype um: add missing declaration of 'getrlimit()' and friends net : enable tx time stamping in the vde driver. hostfs: fix a not needed double check
2013-03-11Merge branch 'for-linus' of ↵Linus Torvalds8-40/+185
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: "Except for the largish change to the ALPS driver adding "Dolphin V1" support and Wacom getting a new signature of yet another device, the rest are straightforward driver fixes." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: mms114 - Fix regulator enable and disable paths Input: ads7864 - check return value of regulator enable Input: tc3589x-keypad - fix keymap size Input: wacom - add support for 0x10d Input: ALPS - update documentation for recent touchpad driver mods Input: ALPS - add "Dolphin V1" touchpad support Input: ALPS - remove unused argument to alps_enter_command_mode() Input: cypress_ps2 - fix trackpadi found in Dell XPS12
2013-03-11fs: Limit sys_mount to only request filesystem modules. (Part 3)Eric W. Biederman5-0/+5
Somehow I failed to add the MODULE_ALIAS_FS for cifs, hostfs, hpfs, squashfs, and udf despite what I thought were my careful checks :( Add them now. Signed-off-by: "Eric W. Biederman" <[email protected]>
2013-03-11ARM: imx: fix typo "DEBUG_IMX50_IMX53_UART"Paul Bolle1-1/+1
Commit f8c95fe (ARM: imx: support DEBUG_LL uart port selection for all i.MX SoCs) had a typo that DEBUG_IMX50_IMX53_UART should be DEBUG_IMX53_UART. Signed-off-by: Paul Bolle <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2013-03-11usb: gadget: pxa25x: fix disconnect reportingFelipe Balbi1-0/+4
when commit 6166c24 (usb: gadget: pxa25x_udc: convert to udc_start/udc_stop) converted this driver to udc_start/udc_stop, it failed to consider the fact that stop_activity() is called from disconnect interrupt. Fix the problem so that gadget drivers know about proper disconnect sequences. Signed-off-by: Felipe Balbi <[email protected]>
2013-03-11s390: Fix a header dependencies related build errorLi Zefan1-0/+1
Commit 877c685607925238e302cd3aa38788dca6c1b226 ("perf: Remove include of cgroup.h from perf_event.h") caused this build failure if PERF_EVENTS is enabled: In file included from arch/s390/include/asm/perf_event.h:9:0, from include/linux/perf_event.h:24, from kernel/events/ring_buffer.c:12: arch/s390/include/asm/cpu_mf.h: In function 'qctri': arch/s390/include/asm/cpu_mf.h:61:12: error: 'EINVAL' undeclared (first use in this function) cpu_mf.h had an implicit errno.h dependency, which was added indirectly via cgroups.h but not anymore. Add it explicitly. Reported-by: Fengguang Wu <[email protected]> Tested-by: Fengguang Wu <[email protected]> Signed-off-by: Li Zefan <[email protected]> Cc: Martin Schwidefsky <[email protected]> Cc: Heiko Carstens <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
2013-03-11um: Use tty_port in SIGWINCH handlerRichard Weinberger5-18/+22
The tty below tty_port might get destroyed by the tty layer while we hold a reference to it. So we have to carry tty_port around... Signed-off-by: Richard Weinberger <[email protected]>
2013-03-11um: Use tty_port_operations->destructRichard Weinberger3-14/+14
As we setup the SIGWINCH handler in tty_port_operations->activate it makes sense to tear down it in ->destruct. Signed-off-by: Richard Weinberger <[email protected]>
2013-03-11um: fix build failure due to mess-up of sig_info protorypeSergei Trofimovich1-1/+1
arch/um/os-Linux/signal.c:18:8: error: conflicting types for 'sig_info' In file included from /home/slyfox/linux-2.6/arch/um/os-Linux/signal.c:12:0: arch/um/include/shared/as-layout.h:64:15: note: previous declaration of 'sig_info' was here Signed-off-by: Sergei Trofimovich <[email protected]> CC: Jeff Dike <[email protected]> CC: Richard Weinberger <[email protected]> CC: "Martin Pärtel" <[email protected]> CC: Al Viro <[email protected]> CC: [email protected] CC: [email protected] CC: [email protected] Signed-off-by: Richard Weinberger <[email protected]>
2013-03-11um: add missing declaration of 'getrlimit()' and friendsSergei Trofimovich1-0/+2
arch/um/os-Linux/start_up.c: In function 'check_coredump_limit': arch/um/os-Linux/start_up.c:338:16: error: storage size of 'lim' isn't known arch/um/os-Linux/start_up.c:339:2: error: implicit declaration of function 'getrlimit' [-Werror=implicit-function-declaration] Signed-off-by: Sergei Trofimovich <[email protected]> CC: Jeff Dike <[email protected]> CC: Richard Weinberger <[email protected]> CC: Al Viro <[email protected]> CC: [email protected] CC: [email protected] CC: [email protected] Signed-off-by: Richard Weinberger <[email protected]>
2013-03-11net : enable tx time stamping in the vde driver.Paul Chavent1-0/+2
This new version moves the skb_tx_timestamp in the main uml driver. This should avoid the need to call this function in each transport (vde, slirp, tuntap, ...). It also add support for ethtool get_ts_info. Signed-off-by: Paul Chavent <[email protected]> Acked-by: Richard Cochran <[email protected]> Signed-off-by: Richard Weinberger <[email protected]>
2013-03-11hostfs: fix a not needed double checkMarco Stornelli1-8/+1
With the commit 3be2be0a32c18b0fd6d623cda63174a332ca0de1 we removed vmtruncate, but actaully there is no need to call inode_newsize_ok() because the checks are already done in inode_change_ok() at the begin of the function. Signed-off-by: Marco Stornelli <[email protected]> Signed-off-by: Richard Weinberger <[email protected]>
2013-03-11ALSA: seq: Fix missing error handling in snd_seq_timer_open()Takashi Iwai1-4/+4
snd_seq_timer_open() didn't catch the whole error path but let through if the timer id is a slave. This may lead to Oops by accessing the uninitialized pointer. BUG: unable to handle kernel NULL pointer dereference at 00000000000002ae IP: [<ffffffff819b3477>] snd_seq_timer_open+0xe7/0x130 PGD 785cd067 PUD 76964067 PMD 0 Oops: 0002 [#4] SMP CPU 0 Pid: 4288, comm: trinity-child7 Tainted: G D W 3.9.0-rc1+ #100 Bochs Bochs RIP: 0010:[<ffffffff819b3477>] [<ffffffff819b3477>] snd_seq_timer_open+0xe7/0x130 RSP: 0018:ffff88006ece7d38 EFLAGS: 00010246 RAX: 0000000000000286 RBX: ffff88007851b400 RCX: 0000000000000000 RDX: 000000000000ffff RSI: ffff88006ece7d58 RDI: ffff88006ece7d38 RBP: ffff88006ece7d98 R08: 000000000000000a R09: 000000000000fffe R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: ffff8800792c5400 R14: 0000000000e8f000 R15: 0000000000000007 FS: 00007f7aaa650700(0000) GS:ffff88007f800000(0000) GS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000002ae CR3: 000000006efec000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process trinity-child7 (pid: 4288, threadinfo ffff88006ece6000, task ffff880076a8a290) Stack: 0000000000000286 ffffffff828f2be0 ffff88006ece7d58 ffffffff810f354d 65636e6575716573 2065756575712072 ffff8800792c0030 0000000000000000 ffff88006ece7d98 ffff8800792c5400 ffff88007851b400 ffff8800792c5520 Call Trace: [<ffffffff810f354d>] ? trace_hardirqs_on+0xd/0x10 [<ffffffff819b17e9>] snd_seq_queue_timer_open+0x29/0x70 [<ffffffff819ae01a>] snd_seq_ioctl_set_queue_timer+0xda/0x120 [<ffffffff819acb9b>] snd_seq_do_ioctl+0x9b/0xd0 [<ffffffff819acbe0>] snd_seq_ioctl+0x10/0x20 [<ffffffff811b9542>] do_vfs_ioctl+0x522/0x570 [<ffffffff8130a4b3>] ? file_has_perm+0x83/0xa0 [<ffffffff810f354d>] ? trace_hardirqs_on+0xd/0x10 [<ffffffff811b95ed>] sys_ioctl+0x5d/0xa0 [<ffffffff813663fe>] ? trace_hardirqs_on_thunk+0x3a/0x3f [<ffffffff81faed69>] system_call_fastpath+0x16/0x1b Reported-and-tested-by: Tommi Rantala <[email protected]> Cc: <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2013-03-11Merge branch 'drm-nouveau-fixes-3.9' of ↵Dave Airlie4-4/+10
git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-next Regression fixes and oops fixes for nouveau. * 'drm-nouveau-fixes-3.9' of git://anongit.freedesktop.org/git/nouveau/linux-2.6: drm/nv50: use correct tiling methods for m2mf buffer moves drm/nouveau: idle channel before releasing notify object drm/nouveau: fix regression in vblanking drm/nv50: encoder creation failure doesn't mean full init failure
2013-03-11ARM: imx: pll1_sys should be an initial on clkShawn Guo1-1/+1
We always boot from PLL1, so let's have pll1_sys in the clks_init_on list to have clk prepare/enable use count match the hardware status, so that drivers managing pll1_sys like cpufreq can get the use count right from the start. Reported-by: Dirk Behme <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.