aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2024-02-19serial: amba-pl011: Fix DMA transmission in RS485 modeLino Sanfilippo1-30/+30
When DMA is used in RS485 mode make sure that the UARTs tx section is enabled before the DMA buffers are queued for transmission. Cc: [email protected] Fixes: 8d479237727c ("serial: amba-pl011: add RS485 support") Signed-off-by: Lino Sanfilippo <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2024-02-19serial: stm32: do not always set SER_RS485_RX_DURING_TX if RS485 is enabledLino Sanfilippo1-1/+3
Before commit 07c30ea5861f ("serial: Do not hold the port lock when setting rx-during-tx GPIO") the SER_RS485_RX_DURING_TX flag was only set if the rx-during-tx mode was not controlled by a GPIO. Now the flag is set unconditionally when RS485 is enabled. This results in an incorrect setting if the rx-during-tx GPIO is not asserted. Fix this by setting the flag only if the rx-during-tx mode is not controlled by a GPIO and thus restore the correct behaviour. Cc: [email protected] # 6.6+ Fixes: 07c30ea5861f ("serial: Do not hold the port lock when setting rx-during-tx GPIO") Signed-off-by: Lino Sanfilippo <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2024-02-19tty: hvc: Don't enable the RISC-V SBI console by defaultPalmer Dabbelt1-3/+5
The new SBI console has the same problem as the old one: there's only one shared backing hardware and no synchronization, so the two drivers end up stepping on each other. This was the same issue the old SBI-0.1 console drivers had, but that was disabled by default when SBI-0.1 was. So just mark the new driver as nonportable. Reported-by: Emil Renner Berthing <[email protected]> Fixes: 88ead68e764c ("tty: Add SBI debug console support to HVC SBI driver") Signed-off-by: Palmer Dabbelt <[email protected]> Reviewed-by: Paul Walmsley <[email protected]> Reviewed-by: Anup Patel <[email protected]> Reviewed-by: Conor Dooley <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2024-02-19drm/meson: Don't remove bridges which are created by other driversMartin Blumenstingl3-3/+0
Stop calling drm_bridge_remove() for bridges allocated/managed by other drivers in the remove paths of meson_encoder_{cvbs,dsi,hdmi}. drm_bridge_remove() unregisters the bridge so it cannot be used anymore. Doing so for bridges we don't own can lead to the video pipeline not being able to come up after -EPROBE_DEFER of the VPU because we're unregistering a bridge that's managed by another driver. The other driver doesn't know that we have unregistered it's bridge and on subsequent .probe() we're not able to find those bridges anymore (since nobody re-creates them). This fixes probe errors on Meson8b boards with the CVBS outputs enabled. Fixes: 09847723c12f ("drm/meson: remove drm bridges at aggregate driver unbind time") Fixes: 42dcf15f901c ("drm/meson: add DSI encoder") Cc: <[email protected]> Reported-by: Steve Morvai <[email protected]> Signed-off-by: Martin Blumenstingl <[email protected]> Reviewed-by: Neil Armstrong <[email protected]> Tested-by: Steve Morvai <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Neil Armstrong <[email protected]> Signed-off-by: Neil Armstrong <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-02-19MAINTAINERS: Drop myself as maintainer of TYPEC port controller driversGuenter Roeck1-2/+1
I am no longer involved in Type-C development and not really current on its status and progress. Recently I have been doing more damage than good. It is time to go. Cc: Heikki Krogerus <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> Signed-off-by: Guenter Roeck <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2024-02-19usb: gadget: ncm: Avoid dropping datagrams of properly parsed NTBsKrishna Kurapati1-1/+9
It is observed sometimes when tethering is used over NCM with Windows 11 as host, at some instances, the gadget_giveback has one byte appended at the end of a proper NTB. When the NTB is parsed, unwrap call looks for any leftover bytes in SKB provided by u_ether and if there are any pending bytes, it treats them as a separate NTB and parses it. But in case the second NTB (as per unwrap call) is faulty/corrupt, all the datagrams that were parsed properly in the first NTB and saved in rx_list are dropped. Adding a few custom traces showed the following: [002] d..1 7828.532866: dwc3_gadget_giveback: ep1out: req 000000003868811a length 1025/16384 zsI ==> 0 [002] d..1 7828.532867: ncm_unwrap_ntb: K: ncm_unwrap_ntb toprocess: 1025 [002] d..1 7828.532867: ncm_unwrap_ntb: K: ncm_unwrap_ntb nth: 1751999342 [002] d..1 7828.532868: ncm_unwrap_ntb: K: ncm_unwrap_ntb seq: 0xce67 [002] d..1 7828.532868: ncm_unwrap_ntb: K: ncm_unwrap_ntb blk_len: 0x400 [002] d..1 7828.532868: ncm_unwrap_ntb: K: ncm_unwrap_ntb ndp_len: 0x10 [002] d..1 7828.532869: ncm_unwrap_ntb: K: Parsed NTB with 1 frames In this case, the giveback is of 1025 bytes and block length is 1024. The rest 1 byte (which is 0x00) won't be parsed resulting in drop of all datagrams in rx_list. Same is case with packets of size 2048: [002] d..1 7828.557948: dwc3_gadget_giveback: ep1out: req 0000000011dfd96e length 2049/16384 zsI ==> 0 [002] d..1 7828.557949: ncm_unwrap_ntb: K: ncm_unwrap_ntb nth: 1751999342 [002] d..1 7828.557950: ncm_unwrap_ntb: K: ncm_unwrap_ntb blk_len: 0x800 Lecroy shows one byte coming in extra confirming that the byte is coming in from PC: Transfer 2959 - Bytes Transferred(1025) Timestamp((18.524 843 590) - Transaction 8391 - Data(1025 bytes) Timestamp(18.524 843 590) --- Packet 4063861 Data(1024 bytes) Duration(2.117us) Idle(14.700ns) Timestamp(18.524 843 590) --- Packet 4063863 Data(1 byte) Duration(66.160ns) Time(282.000ns) Timestamp(18.524 845 722) According to Windows driver, no ZLP is needed if wBlockLength is non-zero, because the non-zero wBlockLength has already told the function side the size of transfer to be expected. However, there are in-market NCM devices that rely on ZLP as long as the wBlockLength is multiple of wMaxPacketSize. To deal with such devices, it pads an extra 0 at end so the transfer is no longer multiple of wMaxPacketSize. Cc: <[email protected]> Fixes: 9f6ce4240a2b ("usb: gadget: f_ncm.c added") Signed-off-by: Krishna Kurapati <[email protected]> Reviewed-by: Maciej Żenczykowski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2024-02-19Revert "usb: typec: tcpm: reset counter when enter into unattached state ↵Ondrej Jirman1-3/+0
after try role" The reverted commit makes the state machine only ever go from SRC_ATTACH_WAIT to SNK_TRY in endless loop when toggling. After revert it goes to SRC_ATTACHED after initially trying SNK_TRY earlier, as it should for toggling to ever detect the power source mode and the port is again able to provide power to attached power sinks. This reverts commit 2d6d80127006ae3da26b1f21a65eccf957f2d1e5. Cc: [email protected] Fixes: 2d6d80127006 ("usb: typec: tcpm: reset counter when enter into unattached state after try role") Signed-off-by: Ondrej Jirman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2024-02-19usb: gadget: omap_udc: fix USB gadget regression on Palm TEAaro Koskinen1-1/+2
When upgrading from 6.1 LTS to 6.6 LTS, I noticed the ethernet gadget stopped working on Palm TE. Commit 8825acd7cc8a ("ARM: omap1: remove dead code") deleted Palm TE from machine_without_vbus_sense(), although the board is still used. Fix that. Fixes: 8825acd7cc8a ("ARM: omap1: remove dead code") Cc: stable <[email protected]> Signed-off-by: Aaro Koskinen <[email protected]> Acked-by: Arnd Bergmann <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2024-02-19usb: dwc3: gadget: Don't disconnect if not startedThinh Nguyen1-0/+5
Don't go through soft-disconnection sequence if the controller hasn't started. Otherwise, there will be timeout and warning reports from the soft-disconnection flow. Cc: [email protected] Fixes: 61a348857e86 ("usb: dwc3: gadget: Fix NULL pointer dereference in dwc3_gadget_suspend") Reported-by: Marek Szyprowski <[email protected]> Closes: https://lore.kernel.org/linux-usb/[email protected]/T/#mb0661cd5f9272602af390c18392b9a36da4f96e6 Tested-by: Marek Szyprowski <[email protected]> Signed-off-by: Thinh Nguyen <[email protected]> Link: https://lore.kernel.org/r/e3be9b929934e0680a6f4b8f6eb11b18ae9c7e07.1708043922.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <[email protected]>
2024-02-19usb: cdns3: fix memory double free when handle zero packetFrank Li1-1/+5
829 if (request->complete) { 830 spin_unlock(&priv_dev->lock); 831 usb_gadget_giveback_request(&priv_ep->endpoint, 832 request); 833 spin_lock(&priv_dev->lock); 834 } 835 836 if (request->buf == priv_dev->zlp_buf) 837 cdns3_gadget_ep_free_request(&priv_ep->endpoint, request); Driver append an additional zero packet request when queue a packet, which length mod max packet size is 0. When transfer complete, run to line 831, usb_gadget_giveback_request() will free this requestion. 836 condition is true, so cdns3_gadget_ep_free_request() free this request again. Log: [ 1920.140696][ T150] BUG: KFENCE: use-after-free read in cdns3_gadget_giveback+0x134/0x2c0 [cdns3] [ 1920.140696][ T150] [ 1920.151837][ T150] Use-after-free read at 0x000000003d1cd10b (in kfence-#36): [ 1920.159082][ T150] cdns3_gadget_giveback+0x134/0x2c0 [cdns3] [ 1920.164988][ T150] cdns3_transfer_completed+0x438/0x5f8 [cdns3] Add check at line 829, skip call usb_gadget_giveback_request() if it is additional zero length packet request. Needn't call usb_gadget_giveback_request() because it is allocated in this driver. Cc: [email protected] Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver") Signed-off-by: Frank Li <[email protected]> Reviewed-by: Roger Quadros <[email protected]> Acked-by: Peter Chen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2024-02-19usb: cdns3: fixed memory use after free at cdns3_gadget_ep_disable()Frank Li1-1/+1
... cdns3_gadget_ep_free_request(&priv_ep->endpoint, &priv_req->request); list_del_init(&priv_req->list); ... 'priv_req' actually free at cdns3_gadget_ep_free_request(). But list_del_init() use priv_req->list after it. [ 1542.642868][ T534] BUG: KFENCE: use-after-free read in __list_del_entry_valid+0x10/0xd4 [ 1542.642868][ T534] [ 1542.653162][ T534] Use-after-free read at 0x000000009ed0ba99 (in kfence-#3): [ 1542.660311][ T534] __list_del_entry_valid+0x10/0xd4 [ 1542.665375][ T534] cdns3_gadget_ep_disable+0x1f8/0x388 [cdns3] [ 1542.671571][ T534] usb_ep_disable+0x44/0xe4 [ 1542.675948][ T534] ffs_func_eps_disable+0x64/0xc8 [ 1542.680839][ T534] ffs_func_set_alt+0x74/0x368 [ 1542.685478][ T534] ffs_func_disable+0x18/0x28 Move list_del_init() before cdns3_gadget_ep_free_request() to resolve this problem. Cc: [email protected] Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver") Signed-off-by: Frank Li <[email protected]> Reviewed-by: Roger Quadros <[email protected]> Acked-by: Peter Chen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2024-02-19usb: roles: don't get/set_role() when usb_role_switch is unregisteredXu Yang1-2/+10
There is a possibility that usb_role_switch device is unregistered before the user put usb_role_switch. In this case, the user may still want to get/set_role() since the user can't sense the changes of usb_role_switch. This will add a flag to show if usb_role_switch is already registered and avoid unwanted behaviors. Fixes: fde0aa6c175a ("usb: common: Small class for USB role switches") cc: [email protected] Signed-off-by: Xu Yang <[email protected]> Acked-by: Heikki Krogerus <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2024-02-19usb: roles: fix NULL pointer issue when put module's referenceXu Yang1-6/+11
In current design, usb role class driver will get usb_role_switch parent's module reference after the user get usb_role_switch device and put the reference after the user put the usb_role_switch device. However, the parent device of usb_role_switch may be removed before the user put the usb_role_switch. If so, then, NULL pointer issue will be met when the user put the parent module's reference. This will save the module pointer in structure of usb_role_switch. Then, we don't need to find module by iterating long relations. Fixes: 5c54fcac9a9d ("usb: roles: Take care of driver module reference counting") cc: [email protected] Signed-off-by: Xu Yang <[email protected]> Acked-by: Heikki Krogerus <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2024-02-19usb: cdnsp: fixed issue with incorrect detecting CDNSP family controllersPawel Laszczak3-6/+14
Cadence have several controllers from 0x000403xx family but current driver suuport detecting only one with DID equal 0x0004034E. It causes that if someone uses different CDNSP controller then driver will use incorrect version and register space. Patch fix this issue. cc: [email protected] Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver") Signed-off-by: Pawel Laszczak <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2024-02-19usb: cdnsp: blocked some cdns3 specific codePawel Laszczak1-2/+14
host.c file has some parts of code that were introduced for CDNS3 driver and should not be used with CDNSP driver. This patch blocks using these parts of codes by CDNSP driver. These elements include: - xhci_plat_cdns3_xhci object - cdns3 specific XECP_PORT_CAP_REG register - cdns3 specific XECP_AUX_CTRL_REG1 register cc: [email protected] Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver") Signed-off-by: Pawel Laszczak <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2024-02-19usb: uhci-grlib: Explicitly include linux/platform_device.hAndreas Larsson1-0/+1
This fixes relying upon linux/of_platform.h to include linux/platform_device.h, which it no longer does, thereby fixing compilation problems like: In file included from drivers/usb/host/uhci-hcd.c:850: drivers/usb/host/uhci-grlib.c: In function 'uhci_hcd_grlib_probe': drivers/usb/host/uhci-grlib.c:92:29: error: invalid use of undefined type 'struct platform_device' 92 | struct device_node *dn = op->dev.of_node; | ^~ Fixes: ef175b29a242 ("of: Stop circularly including of_device.h and of_platform.h") Signed-off-by: Andreas Larsson <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2024-02-19powerpc/pseries/iommu: DLPAR add doesn't completely initialize pci_controllerGaurav Batra3-6/+31
When a PCI device is dynamically added, the kernel oopses with a NULL pointer dereference: BUG: Kernel NULL pointer dereference on read at 0x00000030 Faulting instruction address: 0xc0000000006bbe5c Oops: Kernel access of bad area, sig: 11 [#1] LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries Modules linked in: rpadlpar_io rpaphp rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache netfs xsk_diag bonding nft_compat nf_tables nfnetlink rfkill binfmt_misc dm_multipath rpcrdma sunrpc rdma_ucm ib_srpt ib_isert iscsi_target_mod target_core_mod ib_umad ib_iser libiscsi scsi_transport_iscsi ib_ipoib rdma_cm iw_cm ib_cm mlx5_ib ib_uverbs ib_core pseries_rng drm drm_panel_orientation_quirks xfs libcrc32c mlx5_core mlxfw sd_mod t10_pi sg tls ibmvscsi ibmveth scsi_transport_srp vmx_crypto pseries_wdt psample dm_mirror dm_region_hash dm_log dm_mod fuse CPU: 17 PID: 2685 Comm: drmgr Not tainted 6.7.0-203405+ #66 Hardware name: IBM,9080-HEX POWER10 (raw) 0x800200 0xf000006 of:IBM,FW1060.00 (NH1060_008) hv:phyp pSeries NIP: c0000000006bbe5c LR: c000000000a13e68 CTR: c0000000000579f8 REGS: c00000009924f240 TRAP: 0300 Not tainted (6.7.0-203405+) MSR: 8000000000009033 <SF,EE,ME,IR,DR,RI,LE> CR: 24002220 XER: 20040006 CFAR: c000000000a13e64 DAR: 0000000000000030 DSISR: 40000000 IRQMASK: 0 ... NIP sysfs_add_link_to_group+0x34/0x94 LR iommu_device_link+0x5c/0x118 Call Trace: iommu_init_device+0x26c/0x318 (unreliable) iommu_device_link+0x5c/0x118 iommu_init_device+0xa8/0x318 iommu_probe_device+0xc0/0x134 iommu_bus_notifier+0x44/0x104 notifier_call_chain+0xb8/0x19c blocking_notifier_call_chain+0x64/0x98 bus_notify+0x50/0x7c device_add+0x640/0x918 pci_device_add+0x23c/0x298 of_create_pci_dev+0x400/0x884 of_scan_pci_dev+0x124/0x1b0 __of_scan_bus+0x78/0x18c pcibios_scan_phb+0x2a4/0x3b0 init_phb_dynamic+0xb8/0x110 dlpar_add_slot+0x170/0x3b8 [rpadlpar_io] add_slot_store.part.0+0xb4/0x130 [rpadlpar_io] kobj_attr_store+0x2c/0x48 sysfs_kf_write+0x64/0x78 kernfs_fop_write_iter+0x1b0/0x290 vfs_write+0x350/0x4a0 ksys_write+0x84/0x140 system_call_exception+0x124/0x330 system_call_vectored_common+0x15c/0x2ec Commit a940904443e4 ("powerpc/iommu: Add iommu_ops to report capabilities and allow blocking domains") broke DLPAR add of PCI devices. The above added iommu_device structure to pci_controller. During system boot, PCI devices are discovered and this newly added iommu_device structure is initialized by a call to iommu_device_register(). During DLPAR add of a PCI device, a new pci_controller structure is allocated but there are no calls made to iommu_device_register() interface. Fix is to register the iommu device during DLPAR add as well. Fixes: a940904443e4 ("powerpc/iommu: Add iommu_ops to report capabilities and allow blocking domains") Signed-off-by: Gaurav Batra <[email protected]> Reviewed-by: Brian King <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://msgid.link/[email protected]
2024-02-18Linux 6.8-rc5Linus Torvalds1-1/+1
2024-02-18Merge tag 'kbuild-fixes-v6.8-2' of ↵Linus Torvalds9-32/+33
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Reformat nested if-conditionals in Makefiles with 4 spaces - Fix CONFIG_DEBUG_INFO_BTF builds for big endian - Fix modpost for module srcversion - Fix an escape sequence warning in gen_compile_commands.py - Fix kallsyms to ignore ARMv4 thunk symbols * tag 'kbuild-fixes-v6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kallsyms: ignore ARMv4 thunks along with others modpost: trim leading spaces when processing source files list gen_compile_commands: fix invalid escape sequence warning kbuild: Fix changing ELF file type for output of gen_btf for big endian docs: kconfig: Fix grammar and formatting kbuild: use 4-space indentation when followed by conditionals
2024-02-18Merge tag 'x86_urgent_for_v6.8_rc5' of ↵Linus Torvalds1-5/+18
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fix from Borislav Petkov: - Use a GB page for identity mapping only when memory of this size is requested so that mapping of reserved regions is prevented which would otherwise lead to system crashes on UV machines * tag 'x86_urgent_for_v6.8_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm/ident_map: Use gbpages only where full GB page should be mapped.
2024-02-18Merge tag 'irq_urgent_for_v6.8_rc5' of ↵Linus Torvalds4-26/+47
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Borislav Petkov: - Fix GICv4.1 affinity update - Restore a quirk for ACPI-based GICv4 systems - Handle non-coherent GICv4 redistributors properly - Prevent spurious interrupts on Broadcom devices using GIC v3 architecture - Other minor fixes * tag 'irq_urgent_for_v6.8_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/gic-v3-its: Fix GICv4.1 VPE affinity update irqchip/gic-v3-its: Restore quirk probing for ACPI-based systems irqchip/gic-v3-its: Handle non-coherent GICv4 redistributors irqchip/qcom-mpm: Fix IS_ERR() vs NULL check in qcom_mpm_init() irqchip/loongson-eiointc: Use correct struct type in eiointc_domain_alloc() irqchip/irq-brcmstb-l2: Add write memory barrier before exit
2024-02-18Merge tag 'i2c-for-6.8-rc5' of ↵Linus Torvalds4-13/+17
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "Two fixes for i801 and qcom-geni devices. Meanwhile, a fix from Arnd addresses a compilation error encountered during compile test on powerpc" * tag 'i2c-for-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: i801: Fix block process call transactions i2c: pasemi: split driver into two separate modules i2c: qcom-geni: Correct I2C TRE sequence
2024-02-18Merge branch 'bcmasp-fixes'David S. Miller2-3/+6
Justin Chen says: ==================== net: bcmasp: bug fixes for bcmasp Fix two bugs. - Indicate that PM is managed by mac to prevent double pm calls. This doesn't lead to a crash, but waste a noticable amount of time suspending/resuming. - Sanity check for OOB write was off by one. Leading to a false error when using the full array. ==================== Signed-off-by: David S. Miller <[email protected]>
2024-02-18net: bcmasp: Sanity check is off by oneJustin Chen1-3/+3
A sanity check for OOB write is off by one leading to a false positive when the array is full. Fixes: 9b90aca97f6d ("net: ethernet: bcmasp: fix possible OOB write in bcmasp_netfilt_get_all_active()") Signed-off-by: Justin Chen <[email protected]> Reviewed-by: Florian Fainelli <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2024-02-18net: bcmasp: Indicate MAC is in charge of PHY PMFlorian Fainelli1-0/+3
Avoid the PHY library call unnecessarily into the suspend/resume functions by setting phydev->mac_managed_pm to true. The ASP driver essentially does exactly what mdio_bus_phy_resume() does. Fixes: 490cb412007d ("net: bcmasp: Add support for ASP2.0 Ethernet controller") Signed-off-by: Florian Fainelli <[email protected]> Signed-off-by: Justin Chen <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2024-02-18Merge branch 'mptcp-fixes'David S. Miller12-68/+116
Matthieu Baerts says: ==================== mptcp: misc. fixes for v6.8 This series includes 4 types of fixes: Patches 1 and 2 force the path-managers not to allocate a new address entry when dealing with the "special" ID 0, reserved to the address of the initial subflow. These patches can be backported up to v5.19 and v5.12 respectively. Patch 3 to 6 fix the in-kernel path-manager not to create duplicated subflows. Patch 6 is the main fix, but patches 3 to 5 are some kind of pre-requisities: they fix some data races that could also lead to the creation of unexpected subflows. These patches can be backported up to v5.7, v5.10, v6.0, and v5.15 respectively. Note that patch 3 modifies the existing ULP API. No better solutions have been found for -net, and there is some similar prior art, see commit 0df48c26d841 ("tcp: add tcpi_bytes_acked to tcp_info"). Please also note that TLS ULP Diag has likely the same issue. Patches 7 to 9 fix issues in the selftests, when executing them on older kernels, e.g. when testing the last version of these kselftests on the v5.15.148 kernel as it is done by LKFT when validating stable kernels. These patches only avoid printing expected errors the console and marking some tests as "OK" while they have been skipped. Patches 7 and 8 can be backported up to v6.6. Patches 10 to 13 make sure all MPTCP selftests subtests have a unique name. It is important to have a unique (sub)test name in TAP, because that's the test identifier. Some CI environments might drop tests with duplicated names. Patches 10 to 12 can be backported up to v6.6. ==================== Signed-off-by: Matthieu Baerts (NGI0) <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2024-02-18selftests: mptcp: diag: unique 'cestab' subtest namesMatthieu Baerts (NGI0)1-6/+11
It is important to have a unique (sub)test name in TAP, because some CI environments drop tests with duplicated name. Some 'cestab' subtests from the diag selftest had the same names, e.g.: ....chk 0 cestab Now the previous value is taken, to have different names, e.g.: ....chk 2->0 cestab after flush While at it, the 'after flush' info is added, similar to what is done with the 'in use' subtests. Also inspired by these 'in use' subtests, 'many' is displayed instead of a large number: many msk socket present [ ok ] ....chk many msk in use [ ok ] ....chk many cestab [ ok ] ....chk many->0 msk in use after flush [ ok ] ....chk many->0 cestab after flush [ ok ] Fixes: 81ab772819da ("selftests: mptcp: diag: check CURRESTAB counters") Cc: [email protected] Reviewed-by: Geliang Tang <[email protected]> Signed-off-by: Matthieu Baerts (NGI0) <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2024-02-18selftests: mptcp: diag: unique 'in use' subtest namesMatthieu Baerts (NGI0)1-8/+12
It is important to have a unique (sub)test name in TAP, because some CI environments drop tests with duplicated name. Some 'in use' subtests from the diag selftest had the same names, e.g.: chk 0 msk in use after flush Now the previous value is taken, to have different names, e.g.: chk 2->0 msk in use after flush While at it, avoid repeating the full message, declare it once in the helper. Fixes: ce9902573652 ("selftests: mptcp: diag: format subtests results in TAP") Cc: [email protected] Reviewed-by: Geliang Tang <[email protected]> Signed-off-by: Matthieu Baerts (NGI0) <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2024-02-18selftests: mptcp: userspace_pm: unique subtest namesMatthieu Baerts (NGI0)1-2/+2
It is important to have a unique (sub)test name in TAP, because some CI environments drop tests with duplicated names. Some subtests from the userspace_pm selftest had the same names. That's because different subflows are created (and deleted) between the same pair of IP addresses. Simply adding the destination port in the name is then enough to have different names, because the destination port is always different. Note that adding such info takes a bit more space, so we need to increase a bit the width to print the name, simply to keep all the '[ OK ]' aligned as before. Fixes: f589234e1af0 ("selftests: mptcp: userspace_pm: format subtests results in TAP") Cc: [email protected] Reviewed-by: Geliang Tang <[email protected]> Signed-off-by: Matthieu Baerts (NGI0) <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2024-02-18selftests: mptcp: simult flows: fix some subtest namesMatthieu Baerts (NGI0)1-1/+2
The selftest was correctly recording all the results, but the 'reverse direction' part was missing in the name when needed. It is important to have a unique (sub)test name in TAP, because some CI environments drop tests with duplicated name. Fixes: 675d99338e7a ("selftests: mptcp: simult flows: format subtests results in TAP") Cc: [email protected] Reviewed-by: Geliang Tang <[email protected]> Signed-off-by: Matthieu Baerts (NGI0) <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2024-02-18selftests: mptcp: diag: fix bash warnings on older kernelsMatthieu Baerts (NGI0)1-2/+2
Since the 'Fixes' commit mentioned below, the command that is executed in __chk_nr() helper can return nothing if the feature is not supported. This is the case when the MPTCP CURRESTAB counter is not supported. To avoid this warning ... ./diag.sh: line 65: [: !=: unary operator expected ... we just need to surround '$nr' with double quotes, to support an empty string when the feature is not supported. Fixes: 81ab772819da ("selftests: mptcp: diag: check CURRESTAB counters") Cc: [email protected] Reviewed-by: Geliang Tang <[email protected]> Signed-off-by: Matthieu Baerts (NGI0) <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2024-02-18selftests: mptcp: pm nl: avoid error msg on older kernelsMatthieu Baerts (NGI0)1-1/+1
Since the 'Fixes' commit mentioned below, and if the kernel being tested doesn't support the 'fullmesh' flag, this error will be printed: netlink error -22 (Invalid argument) ./pm_nl_ctl: bailing out due to netlink error[s] But that can be normal if the kernel doesn't support the feature, no need to print this worrying error message while everything else looks OK. So we can mute stderr. Failures will still be detected if any. Fixes: 1dc88d241f92 ("selftests: mptcp: pm_nl_ctl: always look for errors") Cc: [email protected] Reviewed-by: Geliang Tang <[email protected]> Signed-off-by: Matthieu Baerts (NGI0) <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2024-02-18selftests: mptcp: pm nl: also list skipped testsMatthieu Baerts (NGI0)1-0/+6
If the feature is not supported by older kernels, and instead of just ignoring some tests, we should mark them as skipped, so we can still track them. Fixes: d85555ac11f9 ("selftests: mptcp: pm_netlink: format subtests results in TAP") Cc: [email protected] Reviewed-by: Geliang Tang <[email protected]> Signed-off-by: Matthieu Baerts (NGI0) <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2024-02-18mptcp: fix duplicate subflow creationPaolo Abeni1-15/+18
Fullmesh endpoints could end-up unexpectedly generating duplicate subflows - same local and remote addresses - when multiple incoming ADD_ADDR are processed before the PM creates the subflow for the local endpoints. Address the issue explicitly checking for duplicates at subflow creation time. To avoid a quadratic computational complexity, track the unavailable remote address ids in a temporary bitmap and initialize such bitmap with the remote ids of all the existing subflows matching the local address currently processed. The above allows additionally replacing the existing code checking for duplicate entry in the current set with a simple bit test operation. Fixes: 2843ff6f36db ("mptcp: remote addresses fullmesh") Cc: [email protected] Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/435 Signed-off-by: Paolo Abeni <[email protected]> Reviewed-by: Mat Martineau <[email protected]> Signed-off-by: Matthieu Baerts (NGI0) <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2024-02-18mptcp: fix data races on remote_idPaolo Abeni2-7/+7
Similar to the previous patch, address the data race on remote_id, adding the suitable ONCE annotations. Fixes: bedee0b56113 ("mptcp: address lookup improvements") Cc: [email protected] Signed-off-by: Paolo Abeni <[email protected]> Reviewed-by: Mat Martineau <[email protected]> Signed-off-by: Matthieu Baerts (NGI0) <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2024-02-18mptcp: fix data races on local_idPaolo Abeni6-13/+23
The local address id is accessed lockless by the NL PM, add all the required ONCE annotation. There is a caveat: the local id can be initialized late in the subflow life-cycle, and its validity is controlled by the local_id_valid flag. Remove such flag and encode the validity in the local_id field itself with negative value before initialization. That allows accessing the field consistently with a single read operation. Fixes: 0ee4261a3681 ("mptcp: implement mptcp_pm_remove_subflow") Cc: [email protected] Signed-off-by: Paolo Abeni <[email protected]> Reviewed-by: Mat Martineau <[email protected]> Signed-off-by: Matthieu Baerts (NGI0) <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2024-02-18mptcp: fix lockless access in subflow ULP diagPaolo Abeni3-3/+7
Since the introduction of the subflow ULP diag interface, the dump callback accessed all the subflow data with lockless. We need either to annotate all the read and write operation accordingly, or acquire the subflow socket lock. Let's do latter, even if slower, to avoid a diffstat havoc. Fixes: 5147dfb50832 ("mptcp: allow dumping subflow context to userspace") Cc: [email protected] Signed-off-by: Paolo Abeni <[email protected]> Reviewed-by: Mat Martineau <[email protected]> Signed-off-by: Matthieu Baerts (NGI0) <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2024-02-18mptcp: add needs_id for netlink appending addrGeliang Tang1-5/+19
Just the same as userspace PM, a new parameter needs_id is added for in-kernel PM mptcp_pm_nl_append_new_local_addr() too. Add a new helper mptcp_pm_has_addr_attr_id() to check whether an address ID is set from PM or not. In mptcp_pm_nl_get_local_id(), needs_id is always true, but in mptcp_pm_nl_add_addr_doit(), pass mptcp_pm_has_addr_attr_id() to needs_it. Fixes: efd5a4c04e18 ("mptcp: add the address ID assignment bitmap") Cc: [email protected] Signed-off-by: Geliang Tang <[email protected]> Reviewed-by: Mat Martineau <[email protected]> Signed-off-by: Matthieu Baerts (NGI0) <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2024-02-18mptcp: add needs_id for userspace appending addrGeliang Tang1-6/+7
When userspace PM requires to create an ID 0 subflow in "userspace pm create id 0 subflow" test like this: userspace_pm_add_sf $ns2 10.0.3.2 0 An ID 1 subflow, in fact, is created. Since in mptcp_pm_nl_append_new_local_addr(), 'id 0' will be treated as no ID is set by userspace, and will allocate a new ID immediately: if (!e->addr.id) e->addr.id = find_next_zero_bit(pernet->id_bitmap, MPTCP_PM_MAX_ADDR_ID + 1, 1); To solve this issue, a new parameter needs_id is added for mptcp_userspace_pm_append_new_local_addr() to distinguish between whether userspace PM has set an ID 0 or whether userspace PM has not set any address. needs_id is true in mptcp_userspace_pm_get_local_id(), but false in mptcp_pm_nl_announce_doit() and mptcp_pm_nl_subflow_create_doit(). Fixes: e5ed101a6028 ("mptcp: userspace pm allow creating id 0 subflow") Cc: [email protected] Signed-off-by: Geliang Tang <[email protected]> Reviewed-by: Mat Martineau <[email protected]> Signed-off-by: Matthieu Baerts (NGI0) <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2024-02-18Merge branch 'inet-fix-NLM_F_DUMP_INTR-logic'David S. Miller2-7/+35
Eric Dumazet says: ==================== inet: fix NLM_F_DUMP_INTR logic Make sure NLM_F_DUMP_INTR is generated if dev_base_seq and dev_addr_genid are changed by the same amount. ==================== Signed-off-by: David S. Miller <[email protected]>
2024-02-18ipv6: properly combine dev_base_seq and ipv6.dev_addr_genidEric Dumazet1-3/+18
net->dev_base_seq and ipv6.dev_addr_genid are monotonically increasing. If we XOR their values, we could miss to detect if both values were changed with the same amount. Fixes: 63998ac24f83 ("ipv6: provide addr and netconf dump consistency info") Signed-off-by: Eric Dumazet <[email protected]> Cc: Nicolas Dichtel <[email protected]> Signed-off-by: Eric Dumazet <[email protected]> Acked-by: Nicolas Dichtel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2024-02-18ipv4: properly combine dev_base_seq and ipv4.dev_addr_genidEric Dumazet1-4/+17
net->dev_base_seq and ipv4.dev_addr_genid are monotonically increasing. If we XOR their values, we could miss to detect if both values were changed with the same amount. Fixes: 0465277f6b3f ("ipv4: provide addr and netconf dump consistency info") Signed-off-by: Eric Dumazet <[email protected]> Cc: Nicolas Dichtel <[email protected]> Acked-by: Nicolas Dichtel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2024-02-17Merge tag 'powerpc-6.8-3' of ↵Linus Torvalds24-33/+77
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: "This is a bit of a big batch for rc4, but just due to holiday hangover and because I didn't send any fixes last week due to a late revert request. I think next week should be back to normal. - Fix ftrace bug on boot caused by exit text sections with '-fpatchable-function-entry' - Fix accuracy of stolen time on pseries since the switch to VIRT_CPU_ACCOUNTING_GEN - Fix a crash in the IOMMU code when doing DLPAR remove - Set pt_regs->link on scv entry to fix BPF stack unwinding - Add missing PPC_FEATURE_BOOKE on 64-bit e5500/e6500, which broke gdb - Fix boot on some 6xx platforms with STRICT_KERNEL_RWX enabled - Fix build failures with KASAN enabled and 32KB stack size - Some other minor fixes Thanks to Arnd Bergmann, Benjamin Gray, Christophe Leroy, David Engraf, Gaurav Batra, Jason Gunthorpe, Jiangfeng Xiao, Matthias Schiffer, Nathan Lynch, Naveen N Rao, Nicholas Piggin, Nysal Jan K.A, R Nageswara Sastry, Shivaprasad G Bhat, Shrikanth Hegde, Spoorthy, Srikar Dronamraju, and Venkat Rao Bagalkote" * tag 'powerpc-6.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/iommu: Fix the missing iommu_group_put() during platform domain attach powerpc/pseries: fix accuracy of stolen time powerpc/ftrace: Ignore ftrace locations in exit text sections powerpc/cputable: Add missing PPC_FEATURE_BOOKE on PPC64 Book-E powerpc/kasan: Limit KASAN thread size increase to 32KB Revert "powerpc/pseries/iommu: Fix iommu initialisation during DLPAR add" powerpc: 85xx: mark local functions static powerpc: udbg_memcons: mark functions static powerpc/kasan: Fix addr error caused by page alignment powerpc/6xx: set High BAT Enable flag on G2_LE cores selftests/powerpc/papr_vpd: Check devfd before get_system_loc_code() powerpc/64: Set task pt_regs->link to the LR value on scv entry powerpc/pseries/iommu: Fix iommu initialisation during DLPAR add powerpc/pseries/papr-sysparm: use u8 arrays for payloads
2024-02-17Merge tag 'bcachefs-2024-02-17' of https://evilpiepirate.org/git/bcachefsLinus Torvalds11-16/+35
Pull bcachefs fixes from Kent Overstreet: "Mostly pretty trivial, the user visible ones are: - don't barf when replicas_required > replicas - fix check_version_upgrade() so it doesn't do something nonsensical when we're downgrading" * tag 'bcachefs-2024-02-17' of https://evilpiepirate.org/git/bcachefs: bcachefs: Fix missing va_end() bcachefs: Fix check_version_upgrade() bcachefs: Clamp replicas_required to replicas bcachefs: fix missing endiannes conversion in sb_members bcachefs: fix kmemleak in __bch2_read_super error handling path bcachefs: Fix missing bch2_err_class() calls
2024-02-17net: stmmac: Fix incorrect dereference in interrupt handlersPavel Sakharov1-20/+0
If 'dev' or 'data' is NULL, the 'priv' variable has an incorrect address when dereferencing calling netdev_err(). Since we get as 'dev_id' or 'data' what was passed as the 'dev' argument to request_irq() during interrupt initialization (that is, the net_device and rx/tx queue pointers initialized at the time of the call) and since there are usually no checks for the 'dev_id' argument in such handlers in other drivers, remove these checks from the handlers in stmmac driver. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 8532f613bc78 ("net: stmmac: introduce MSI Interrupt routines for mac, safety, RX & TX") Signed-off-by: Pavel Sakharov <[email protected]> Reviewed-by: Serge Semin <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2024-02-17Merge tag 'driver-core-6.8-rc5' of ↵Linus Torvalds7-26/+169
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core fixes from Greg KH: "Here are some driver core fixes, a kobject fix, and a documentation update for 6.8-rc5. In detail these changes are: - devlink fixes for reported issues with 6.8-rc1 - topology scheduling regression fix that has been reported by many - kobject loosening of checks change in -rc1 is now reverted as some codepaths seemed to need the checks - documentation update for the CVE process. Has been reviewed by many, the last minute change to the document was to bring the .rst format back into the the new style rules, the contents did not change. All of these, except for the documentation update, have been in linux-next for over a week. The documentation update has been reviewed for weeks by a group of developers, and in public for a week and the wording has stabilized for now. If future changes are needed, we can do so before 6.8-final is out (or anytime after that)" * tag 'driver-core-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: Documentation: Document the Linux Kernel CVE process Revert "kobject: Remove redundant checks for whether ktype is NULL" driver core: fw_devlink: Improve logs for cycle detection driver core: fw_devlink: Improve detection of overlapping cycles driver core: Fix device_link_flag_is_sync_state_only() topology: Set capacity_freq_ref in all cases
2024-02-17Merge tag 'char-misc-6.8-rc5' of ↵Linus Torvalds23-27/+73
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char / miscdriver fixes from Greg KH: "Here is a small set of char/misc and IIO driver fixes for 6.8-rc5. Included in here are: - lots of iio driver fixes for reported issues - nvmem device naming fixup for reported problem - interconnect driver fixes for reported issues All of these have been in linux-next for a while with no reported the issues (the nvmem patch was included in a different branch in linux-next before sent to me for inclusion here)" * tag 'char-misc-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (21 commits) nvmem: include bit index in cell sysfs file name iio: adc: ad4130: only set GPIO_CTRL if pin is unused iio: adc: ad4130: zero-initialize clock init data interconnect: qcom: x1e80100: Add missing ACV enable_mask interconnect: qcom: sm8650: Use correct ACV enable_mask iio: accel: bma400: Fix a compilation problem iio: commom: st_sensors: ensure proper DMA alignment iio: hid-sensor-als: Return 0 for HID_USAGE_SENSOR_TIME_TIMESTAMP iio: move LIGHT_UVA and LIGHT_UVB to the end of iio_modifier staging: iio: ad5933: fix type mismatch regression iio: humidity: hdc3020: fix temperature offset iio: adc: ad7091r8: Fix error code in ad7091r8_gpio_setup() iio: adc: ad_sigma_delta: ensure proper DMA alignment iio: imu: adis: ensure proper DMA alignment iio: humidity: hdc3020: Add Makefile, Kconfig and MAINTAINERS entry iio: imu: bno055: serdev requires REGMAP iio: magnetometer: rm3100: add boundary check for the value read from RM3100_REG_TMRC iio: pressure: bmp280: Add missing bmp085 to SPI id table iio: core: fix memleak in iio_device_register_sysfs interconnect: qcom: sm8550: Enable sync_state ...
2024-02-17Merge tag 'tty-6.8-rc5' of ↵Linus Torvalds3-7/+32
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty / serial fixes from Greg KH: "Here are three small tty and serial driver fixes for 6.8-rc5: - revert a 8250_pci1xxxx off-by-one change that was incorrect - two changes to fix the transmit path of the mxs-auart driver, fixing a regression in the 6.2 release All of these have been in linux-next for over a week with no reported issues" * tag 'tty-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: serial: mxs-auart: fix tx serial: core: introduce uart_port_tx_flags() serial: 8250_pci1xxxx: partially revert off by one patch
2024-02-17Merge tag 'usb-6.8-rc5' of ↵Linus Torvalds6-12/+2
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB / Thunderbolt fixes from Greg KH: "Here are two small fixes for 6.8-rc5: - thunderbolt to fix a reported issue on many platforms - dwc3 driver revert of a commit that caused problems in -rc1 Both of these changes have been in linux-next for over a week with no reported issues" * tag 'usb-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: Revert "usb: dwc3: Support EBC feature of DWC_usb31" thunderbolt: Fix setting the CNS bit in ROUTER_CS_5
2024-02-17Merge tag 'media/v6.8-4' of ↵Linus Torvalds14-68/+156
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fixes from Mauro Carvalho Chehab: - regression fix for rkisp1 shared IRQ logic - fix atomisp breakage due to a kAPI change - permission fix for remote controller BPF support - memleak fix in ir_toy driver - Kconfig dependency fix for pwm-ir-rx * tag 'media/v6.8-4' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: media: pwm-ir-tx: Depend on CONFIG_HIGH_RES_TIMERS media: ir_toy: fix a memleak in irtoy_tx media: rc: bpf attach/detach requires write permission media: atomisp: Adjust for v4l2_subdev_state handling changes in 6.8 media: rkisp1: Fix IRQ handling due to shared interrupts media: Revert "media: rkisp1: Drop IRQF_SHARED"
Powered by cgit, Gruvboxed by Blaster4385.