aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2024-02-20platform/x86: x86-android-tablets: Fix acer_b1_750_goodix_gpios nameHans de Goede1-2/+2
The Acer B1 750 tablet used a Novatek NVT-ts touchscreen, not a Goodix touchscreen. Rename acer_b1_750_goodix_gpios to acer_b1_750_nvt_ts_gpios to correctly reflect this. Signed-off-by: Hans de Goede <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2024-02-20platform/x86: x86-android-tablets: Fix serdev instantiation no longer workingHans de Goede1-26/+9
After commit b286f4e87e32 ("serial: core: Move tty and serdev to be children of serial core port device") x86_instantiate_serdev() no longer works due to the serdev-controller-device moving in the device hierarchy from (e.g.) /sys/devices/pci0000:00/8086228A:00/serial0 to /sys/devices/pci0000:00/8086228A:00/8086228A:00:0/8086228A:00:0.0/serial0 Use the new get_serdev_controller() helper function to fix this. Fixes: b286f4e87e32 ("serial: core: Move tty and serdev to be children of serial core port device") Cc: Tony Lindgren <[email protected]> Signed-off-by: Hans de Goede <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2024-02-20platform/x86: Add new get_serdev_controller() helperHans de Goede1-0/+80
In some cases UART attached devices which require an in kernel driver, e.g. UART attached Bluetooth HCIs are described in the ACPI tables by an ACPI device with a broken or missing UartSerialBusV2() resource. This causes the kernel to create a /dev/ttyS# char-device for the UART instead of creating an in kernel serdev-controller + serdev-device pair for the in kernel driver. The quirk handling in acpi_quirk_skip_serdev_enumeration() makes the kernel create a serdev-controller device for these UARTs instead of a /dev/ttyS#. Instantiating the actual serdev-device to bind to is up to pdx86 code, so far this was handled by the x86-android-tablets code. But since commit b286f4e87e32 ("serial: core: Move tty and serdev to be children of serial core port device") the serdev-controller device has moved in the device hierarchy from (e.g.) /sys/devices/pci0000:00/8086228A:00/serial0 to /sys/devices/pci0000:00/8086228A:00/8086228A:00:0/8086228A:00:0.0/serial0 . This makes this a bit trickier to do and another driver is in the works which will also need this functionality. Add a new helper to get the serdev-controller device, so that the new code for this can be shared. Fixes: b286f4e87e32 ("serial: core: Move tty and serdev to be children of serial core port device") Cc: Tony Lindgren <[email protected]> Signed-off-by: Hans de Goede <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2024-02-20platform/x86: x86-android-tablets: Fix keyboard touchscreen on Lenovo ↵Hans de Goede3-0/+5
Yogabook1 X90 After commit 4014ae236b1d ("platform/x86: x86-android-tablets: Stop using gpiolib private APIs") the touchscreen in the keyboard half of the Lenovo Yogabook1 X90 stopped working with the following error: Goodix-TS i2c-goodix_ts: error -EBUSY: Failed to get irq GPIO The problem is that when getting the IRQ for instantiated i2c_client-s from a GPIO (rather then using an IRQ directly from the IOAPIC), x86_acpi_irq_helper_get() now properly requests the GPIO, which disallows other drivers from requesting it. Normally this is a good thing, but the goodix touchscreen also uses the IRQ as an output during reset to select which of its 2 possible I2C addresses should be used. Add a new free_gpio flag to struct x86_acpi_irq_data to deal with this and release the GPIO after getting the IRQ in this special case. Fixes: 4014ae236b1d ("platform/x86: x86-android-tablets: Stop using gpiolib private APIs") Cc: [email protected] Signed-off-by: Hans de Goede <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2024-02-20arm64/sme: Restore SMCR_EL1.EZT0 on exit from suspendMark Brown1-0/+2
The fields in SMCR_EL1 reset to an architecturally UNKNOWN value. Since we do not otherwise manage the traps configured in this register at runtime we need to reconfigure them after a suspend in case nothing else was kind enough to preserve them for us. Do so for SMCR_EL1.EZT0. Fixes: d4913eee152d ("arm64/sme: Add basic enumeration for SME2") Reported-by: Jackson Cooper-Driver <[email protected]> Signed-off-by: Mark Brown <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Will Deacon <[email protected]>
2024-02-20arm64/sme: Restore SME registers on exit from suspendMark Brown3-0/+19
The fields in SMCR_EL1 and SMPRI_EL1 reset to an architecturally UNKNOWN value. Since we do not otherwise manage the traps configured in this register at runtime we need to reconfigure them after a suspend in case nothing else was kind enough to preserve them for us. The vector length will be restored as part of restoring the SME state for the next SME using task. Fixes: a1f4ccd25cc2 ("arm64/sme: Provide Kconfig for SME") Reported-by: Jackson Cooper-Driver <[email protected]> Signed-off-by: Mark Brown <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Will Deacon <[email protected]>
2024-02-20Revert "arm64: jump_label: use constraints "Si" instead of "i""Will Deacon1-8/+4
This reverts commit f9daab0ad01cf9d165dbbbf106ca4e61d06e7fe8. Geert reports that his particular GCC 5.5 vintage toolchain fails to build an arm64 defconfig because of this change: | arch/arm64/include/asm/jump_label.h:25:2: error: invalid 'asm': | invalid operand | asm goto( ^ Aopparently, this is something we claim to support, so let's revert back to the old jump label constraint for now while discussions about raising the minimum GCC version are ongoing. Reported-by: Geert Uytterhoeven <[email protected]> Link: https://lore.kernel.org/r/CAMuHMdX+6fnAf8Hm6EqYJPAjrrLO9T7c=Gu3S8V_pqjSDowJ6g@mail.gmail.com Signed-off-by: Will Deacon <[email protected]>
2024-02-20perf: CXL: fix CPMU filter value mask lengthHojin Nam1-5/+5
CPMU filter value is described as 4B length in CXL r3.0 8.2.7.2.2. However, it is used as 2B length in code and comments. Reviewed-by: Jonathan Cameron <[email protected]> Signed-off-by: Hojin Nam <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Will Deacon <[email protected]>
2024-02-20gpiolib: Handle no pin_ranges in gpiochip_generic_config()Emil Renner Berthing1-0/+5
Similar to gpiochip_generic_request() and gpiochip_generic_free() the gpiochip_generic_config() function needs to handle the case where there are no pinctrl pins mapped to the GPIOs, usually through the gpio-ranges device tree property. Commit f34fd6ee1be8 ("gpio: dwapb: Use generic request, free and set_config") set the .set_config callback to gpiochip_generic_config() in the dwapb GPIO driver so the GPIO API can set pinctrl configuration for the corresponding pins. Most boards using the dwapb driver do not set the gpio-ranges device tree property though, and in this case gpiochip_generic_config() would return -EPROPE_DEFER rather than the previous -ENOTSUPP return value. This in turn makes gpio_set_config_with_argument_optional() fail and propagate the error to any driver requesting GPIOs. Fixes: 2956b5d94a76 ("pinctrl / gpio: Introduce .set_config() callback for GPIO chips") Reported-by: Jisheng Zhang <[email protected]> Closes: https://lore.kernel.org/linux-gpio/ZdC_g3U4l0CJIWzh@xhacker/ Tested-by: Jisheng Zhang <[email protected]> Signed-off-by: Emil Renner Berthing <[email protected]> Reviewed-by: Linus Walleij <[email protected]> Signed-off-by: Bartosz Golaszewski <[email protected]>
2024-02-20KVM: PPC: Book3S HV: Fix L2 guest reboot failure due to empty 'arch_compat'Amit Machhiwal2-4/+42
Currently, rebooting a pseries nested qemu-kvm guest (L2) results in below error as L1 qemu sends PVR value 'arch_compat' == 0 via ppc_set_compat ioctl. This triggers a condition failure in kvmppc_set_arch_compat() resulting in an EINVAL. qemu-system-ppc64: Unable to set CPU compatibility mode in KVM: Invalid argument Also, a value of 0 for arch_compat generally refers the default compatibility of the host. But, arch_compat, being a Guest Wide Element in nested API v2, cannot be set to 0 in GSB as PowerVM (L0) expects a non-zero value. A value of 0 triggers a kernel trap during a reboot and consequently causes it to fail: [ 22.106360] reboot: Restarting system KVM: unknown exit, hardware reason ffffffffffffffea NIP 0000000000000100 LR 000000000000fe44 CTR 0000000000000000 XER 0000000020040092 CPU#0 MSR 0000000000001000 HID0 0000000000000000 HF 6c000000 iidx 3 didx 3 TB 00000000 00000000 DECR 0 GPR00 0000000000000000 0000000000000000 c000000002a8c300 000000007fe00000 GPR04 0000000000000000 0000000000000000 0000000000001002 8000000002803033 GPR08 000000000a000000 0000000000000000 0000000000000004 000000002fff0000 GPR12 0000000000000000 c000000002e10000 0000000105639200 0000000000000004 GPR16 0000000000000000 000000010563a090 0000000000000000 0000000000000000 GPR20 0000000105639e20 00000001056399c8 00007fffe54abab0 0000000105639288 GPR24 0000000000000000 0000000000000001 0000000000000001 0000000000000000 GPR28 0000000000000000 0000000000000000 c000000002b30840 0000000000000000 CR 00000000 [ - - - - - - - - ] RES 000@ffffffffffffffff SRR0 0000000000000000 SRR1 0000000000000000 PVR 0000000000800200 VRSAVE 0000000000000000 SPRG0 0000000000000000 SPRG1 0000000000000000 SPRG2 0000000000000000 SPRG3 0000000000000000 SPRG4 0000000000000000 SPRG5 0000000000000000 SPRG6 0000000000000000 SPRG7 0000000000000000 HSRR0 0000000000000000 HSRR1 0000000000000000 CFAR 0000000000000000 LPCR 0000000000020400 PTCR 0000000000000000 DAR 0000000000000000 DSISR 0000000000000000 kernel:trap=0xffffffea | pc=0x100 | msr=0x1000 This patch updates kvmppc_set_arch_compat() to use the host PVR value if 'compat_pvr' == 0 indicating that qemu doesn't want to enforce any specific PVR compat mode. The relevant part of the code might need a rework if PowerVM implements a support for `arch_compat == 0` in nestedv2 API. Fixes: 19d31c5f1157 ("KVM: PPC: Add support for nestedv2 guests") Reviewed-by: "Aneesh Kumar K.V (IBM)" <[email protected]> Reviewed-by: Vaibhav Jain <[email protected]> Signed-off-by: Amit Machhiwal <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://msgid.link/[email protected]
2024-02-20docs: netdev: update the link to the CI repoJakub Kicinski1-1/+1
Netronome graciously transferred the original NIPA repo to our new netdev umbrella org. Link to that instead of my private fork. Signed-off-by: Jakub Kicinski <[email protected]> Reviewed-by: Simon Horman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2024-02-20arp: Prevent overflow in arp_req_get().Kuniyuki Iwashima1-1/+2
syzkaller reported an overflown write in arp_req_get(). [0] When ioctl(SIOCGARP) is issued, arp_req_get() looks up an neighbour entry and copies neigh->ha to struct arpreq.arp_ha.sa_data. The arp_ha here is struct sockaddr, not struct sockaddr_storage, so the sa_data buffer is just 14 bytes. In the splat below, 2 bytes are overflown to the next int field, arp_flags. We initialise the field just after the memcpy(), so it's not a problem. However, when dev->addr_len is greater than 22 (e.g. MAX_ADDR_LEN), arp_netmask is overwritten, which could be set as htonl(0xFFFFFFFFUL) in arp_ioctl() before calling arp_req_get(). To avoid the overflow, let's limit the max length of memcpy(). Note that commit b5f0de6df6dc ("net: dev: Convert sa_data to flexible array in struct sockaddr") just silenced syzkaller. [0]: memcpy: detected field-spanning write (size 16) of single field "r->arp_ha.sa_data" at net/ipv4/arp.c:1128 (size 14) WARNING: CPU: 0 PID: 144638 at net/ipv4/arp.c:1128 arp_req_get+0x411/0x4a0 net/ipv4/arp.c:1128 Modules linked in: CPU: 0 PID: 144638 Comm: syz-executor.4 Not tainted 6.1.74 #31 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-debian-1.16.0-5 04/01/2014 RIP: 0010:arp_req_get+0x411/0x4a0 net/ipv4/arp.c:1128 Code: fd ff ff e8 41 42 de fb b9 0e 00 00 00 4c 89 fe 48 c7 c2 20 6d ab 87 48 c7 c7 80 6d ab 87 c6 05 25 af 72 04 01 e8 5f 8d ad fb <0f> 0b e9 6c fd ff ff e8 13 42 de fb be 03 00 00 00 4c 89 e7 e8 a6 RSP: 0018:ffffc900050b7998 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff88803a815000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffffff8641a44a RDI: 0000000000000001 RBP: ffffc900050b7a98 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 203a7970636d656d R12: ffff888039c54000 R13: 1ffff92000a16f37 R14: ffff88803a815084 R15: 0000000000000010 FS: 00007f172bf306c0(0000) GS:ffff88805aa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f172b3569f0 CR3: 0000000057f12005 CR4: 0000000000770ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> arp_ioctl+0x33f/0x4b0 net/ipv4/arp.c:1261 inet_ioctl+0x314/0x3a0 net/ipv4/af_inet.c:981 sock_do_ioctl+0xdf/0x260 net/socket.c:1204 sock_ioctl+0x3ef/0x650 net/socket.c:1321 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:870 [inline] __se_sys_ioctl fs/ioctl.c:856 [inline] __x64_sys_ioctl+0x18e/0x220 fs/ioctl.c:856 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x37/0x90 arch/x86/entry/common.c:81 entry_SYSCALL_64_after_hwframe+0x64/0xce RIP: 0033:0x7f172b262b8d Code: 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f172bf300b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007f172b3abf80 RCX: 00007f172b262b8d RDX: 0000000020000000 RSI: 0000000000008954 RDI: 0000000000000003 RBP: 00007f172b2d3493 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 000000000000000b R14: 00007f172b3abf80 R15: 00007f172bf10000 </TASK> Reported-by: syzkaller <[email protected]> Reported-by: Bjoern Doebel <[email protected]> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Kuniyuki Iwashima <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2024-02-20devlink: fix possible use-after-free and memory leaks in devlink_init()Vasiliy Kovalev1-3/+9
The pernet operations structure for the subsystem must be registered before registering the generic netlink family. Make an unregister in case of unsuccessful registration. Fixes: 687125b5799c ("devlink: split out core code") Signed-off-by: Vasiliy Kovalev <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2024-02-20ipv6: sr: fix possible use-after-free and null-ptr-derefVasiliy Kovalev1-9/+11
The pernet operations structure for the subsystem must be registered before registering the generic netlink family. Fixes: 915d7e5e5930 ("ipv6: sr: add code base for control plane support of SR-IPv6") Signed-off-by: Vasiliy Kovalev <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2024-02-20afs: Increase buffer size in afs_update_volume_status()Daniil Dulov1-2/+2
The max length of volume->vid value is 20 characters. So increase idbuf[] size up to 24 to avoid overflow. Found by Linux Verification Center (linuxtesting.org) with SVACE. [DH: Actually, it's 20 + NUL, so increase it to 24 and use snprintf()] Fixes: d2ddc776a458 ("afs: Overhaul volume and server record caching and fileserver rotation") Signed-off-by: Daniil Dulov <[email protected]> Signed-off-by: David Howells <[email protected]> Link: https://lore.kernel.org/r/[email protected]/ # v1 Link: https://lore.kernel.org/r/[email protected]/ # v2 Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Christian Brauner <[email protected]>
2024-02-20afs: Fix ignored callbacks over ipv4Marc Dionne3-15/+8
When searching for a matching peer, all addresses need to be searched, not just the ipv6 ones in the fs_addresses6 list. Given that the lists no longer contain addresses, there is little reason to splitting things between separate lists, so unify them into a single list. When processing an incoming callback from an ipv4 address, this would lead to a failure to set call->server, resulting in the callback being ignored and the client seeing stale contents. Fixes: 72904d7b9bfb ("rxrpc, afs: Allow afs to pin rxrpc_peer objects") Reported-by: Markus Suvanto <[email protected]> Link: https://lists.infradead.org/pipermail/linux-afs/2024-February/008035.html Signed-off-by: Marc Dionne <[email protected]> Signed-off-by: David Howells <[email protected]> Link: https://lists.infradead.org/pipermail/linux-afs/2024-February/008037.html # v1 Link: https://lists.infradead.org/pipermail/linux-afs/2024-February/008066.html # v2 Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Christian Brauner <[email protected]>
2024-02-20cachefiles: fix memory leak in cachefiles_add_cache()Baokun Li2-0/+3
The following memory leak was reported after unbinding /dev/cachefiles: ================================================================== unreferenced object 0xffff9b674176e3c0 (size 192): comm "cachefilesd2", pid 680, jiffies 4294881224 hex dump (first 32 bytes): 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace (crc ea38a44b): [<ffffffff8eb8a1a5>] kmem_cache_alloc+0x2d5/0x370 [<ffffffff8e917f86>] prepare_creds+0x26/0x2e0 [<ffffffffc002eeef>] cachefiles_determine_cache_security+0x1f/0x120 [<ffffffffc00243ec>] cachefiles_add_cache+0x13c/0x3a0 [<ffffffffc0025216>] cachefiles_daemon_write+0x146/0x1c0 [<ffffffff8ebc4a3b>] vfs_write+0xcb/0x520 [<ffffffff8ebc5069>] ksys_write+0x69/0xf0 [<ffffffff8f6d4662>] do_syscall_64+0x72/0x140 [<ffffffff8f8000aa>] entry_SYSCALL_64_after_hwframe+0x6e/0x76 ================================================================== Put the reference count of cache_cred in cachefiles_daemon_unbind() to fix the problem. And also put cache_cred in cachefiles_add_cache() error branch to avoid memory leaks. Fixes: 9ae326a69004 ("CacheFiles: A cache that backs onto a mounted filesystem") CC: [email protected] Signed-off-by: Baokun Li <[email protected]> Link: https://lore.kernel.org/r/[email protected] Acked-by: David Howells <[email protected]> Reviewed-by: Jingbo Xu <[email protected]> Reviewed-by: Jeff Layton <[email protected]> Signed-off-by: Christian Brauner <[email protected]>
2024-02-20usb: typec: tpcm: Fix issues with power being removed during resetMark Brown1-1/+2
Since the merge of b717dfbf73e8 ("Revert "usb: typec: tcpm: fix cc role at port reset"") into mainline the LibreTech Renegade Elite/Firefly has died during boot, the main symptom observed in testing is a sudden stop in console output. Gábor Stefanik identified in review that the patch would cause power to be removed from devices without batteries (like this board), observing that while the patch is correct according to the spec this appears to be an oversight in the spec. Given that the change makes previously working systems unusable let's revert it, there was some discussion of identifying systems that have alternative power and implementing the standards conforming behaviour in only that case. Fixes: b717dfbf73e8 ("Revert "usb: typec: tcpm: fix cc role at port reset"") Cc: stable <[email protected]> Cc: Badhri Jagan Sridharan <[email protected]> Signed-off-by: Mark Brown <[email protected]> Acked-by: Heikki Krogerus <[email protected]> Reviewed-by: Guenter Roeck <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2024-02-20erofs: fix handling kern_mount() failureAl Viro1-3/+4
if you have a variable that holds NULL or a pointer to live struct mount, do not shove ERR_PTR() into it - not if you later treat "not NULL" as "holds a pointer to object". Signed-off-by: Al Viro <[email protected]>
2024-02-19KVM/VMX: Move VERW closer to VMentry for MDS mitigationPawan Gupta2-4/+19
During VMentry VERW is executed to mitigate MDS. After VERW, any memory access like register push onto stack may put host data in MDS affected CPU buffers. A guest can then use MDS to sample host data. Although likelihood of secrets surviving in registers at current VERW callsite is less, but it can't be ruled out. Harden the MDS mitigation by moving the VERW mitigation late in VMentry path. Note that VERW for MMIO Stale Data mitigation is unchanged because of the complexity of per-guest conditional VERW which is not easy to handle that late in asm with no GPRs available. If the CPU is also affected by MDS, VERW is unconditionally executed late in asm regardless of guest having MMIO access. Signed-off-by: Pawan Gupta <[email protected]> Signed-off-by: Dave Hansen <[email protected]> Acked-by: Sean Christopherson <[email protected]> Link: https://lore.kernel.org/all/20240213-delay-verw-v8-6-a6216d83edb7%40linux.intel.com
2024-02-19KVM/VMX: Use BT+JNC, i.e. EFLAGS.CF to select VMRESUME vs. VMLAUNCHSean Christopherson2-5/+8
Use EFLAGS.CF instead of EFLAGS.ZF to track whether to use VMRESUME versus VMLAUNCH. Freeing up EFLAGS.ZF will allow doing VERW, which clobbers ZF, for MDS mitigations as late as possible without needing to duplicate VERW for both paths. Signed-off-by: Sean Christopherson <[email protected]> Signed-off-by: Pawan Gupta <[email protected]> Signed-off-by: Dave Hansen <[email protected]> Reviewed-by: Nikolay Borisov <[email protected]> Link: https://lore.kernel.org/all/20240213-delay-verw-v8-5-a6216d83edb7%40linux.intel.com
2024-02-19x86/bugs: Use ALTERNATIVE() instead of mds_user_clear static keyPawan Gupta6-37/+34
The VERW mitigation at exit-to-user is enabled via a static branch mds_user_clear. This static branch is never toggled after boot, and can be safely replaced with an ALTERNATIVE() which is convenient to use in asm. Switch to ALTERNATIVE() to use the VERW mitigation late in exit-to-user path. Also remove the now redundant VERW in exc_nmi() and arch_exit_to_user_mode(). Signed-off-by: Pawan Gupta <[email protected]> Signed-off-by: Dave Hansen <[email protected]> Link: https://lore.kernel.org/all/20240213-delay-verw-v8-4-a6216d83edb7%40linux.intel.com
2024-02-19x86/entry_32: Add VERW just before userspace transitionPawan Gupta1-0/+3
As done for entry_64, add support for executing VERW late in exit to user path for 32-bit mode. Signed-off-by: Pawan Gupta <[email protected]> Signed-off-by: Dave Hansen <[email protected]> Link: https://lore.kernel.org/all/20240213-delay-verw-v8-3-a6216d83edb7%40linux.intel.com
2024-02-19x86/entry_64: Add VERW just before userspace transitionPawan Gupta2-0/+12
Mitigation for MDS is to use VERW instruction to clear any secrets in CPU Buffers. Any memory accesses after VERW execution can still remain in CPU buffers. It is safer to execute VERW late in return to user path to minimize the window in which kernel data can end up in CPU buffers. There are not many kernel secrets to be had after SWITCH_TO_USER_CR3. Add support for deploying VERW mitigation after user register state is restored. This helps minimize the chances of kernel data ending up into CPU buffers after executing VERW. Note that the mitigation at the new location is not yet enabled. Corner case not handled ======================= Interrupts returning to kernel don't clear CPUs buffers since the exit-to-user path is expected to do that anyways. But, there could be a case when an NMI is generated in kernel after the exit-to-user path has cleared the buffers. This case is not handled and NMI returning to kernel don't clear CPU buffers because: 1. It is rare to get an NMI after VERW, but before returning to userspace. 2. For an unprivileged user, there is no known way to make that NMI less rare or target it. 3. It would take a large number of these precisely-timed NMIs to mount an actual attack. There's presumably not enough bandwidth. 4. The NMI in question occurs after a VERW, i.e. when user state is restored and most interesting data is already scrubbed. Whats left is only the data that NMI touches, and that may or may not be of any interest. Suggested-by: Dave Hansen <[email protected]> Signed-off-by: Pawan Gupta <[email protected]> Signed-off-by: Dave Hansen <[email protected]> Link: https://lore.kernel.org/all/20240213-delay-verw-v8-2-a6216d83edb7%40linux.intel.com
2024-02-19x86/bugs: Add asm helpers for executing VERWPawan Gupta3-1/+37
MDS mitigation requires clearing the CPU buffers before returning to user. This needs to be done late in the exit-to-user path. Current location of VERW leaves a possibility of kernel data ending up in CPU buffers for memory accesses done after VERW such as: 1. Kernel data accessed by an NMI between VERW and return-to-user can remain in CPU buffers since NMI returning to kernel does not execute VERW to clear CPU buffers. 2. Alyssa reported that after VERW is executed, CONFIG_GCC_PLUGIN_STACKLEAK=y scrubs the stack used by a system call. Memory accesses during stack scrubbing can move kernel stack contents into CPU buffers. 3. When caller saved registers are restored after a return from function executing VERW, the kernel stack accesses can remain in CPU buffers(since they occur after VERW). To fix this VERW needs to be moved very late in exit-to-user path. In preparation for moving VERW to entry/exit asm code, create macros that can be used in asm. Also make VERW patching depend on a new feature flag X86_FEATURE_CLEAR_CPU_BUF. Reported-by: Alyssa Milburn <[email protected]> Suggested-by: Andrew Cooper <[email protected]> Suggested-by: Peter Zijlstra <[email protected]> Signed-off-by: Pawan Gupta <[email protected]> Signed-off-by: Dave Hansen <[email protected]> Link: https://lore.kernel.org/all/20240213-delay-verw-v8-1-a6216d83edb7%40linux.intel.com
2024-02-19parisc: Fix stack unwinderGuenter Roeck1-8/+6
Debugging shows a large number of unaligned access traps in the unwinder code. Code analysis reveals a number of issues with this code: - handle_interruption is passed twice through dereference_kernel_function_descriptor() - ret_from_kernel_thread, syscall_exit, intr_return, _switch_to_ret, and _call_on_stack are passed through dereference_kernel_function_descriptor() even though they are not declared as function pointers. To fix the problems, drop one of the calls to dereference_kernel_function_descriptor() for handle_interruption, and compare the other pointers directly. Fixes: 6414b30b39f9 ("parisc: unwind: Avoid missing prototype warning for handle_interruption()") Fixes: 8e0ba125c2bf ("parisc/unwind: fix unwinder when CONFIG_64BIT is enabled") Cc: Helge Deller <[email protected]> Cc: Sven Schnelle <[email protected]> Cc: John David Anglin <[email protected]> Cc: Charlie Jenkins <[email protected]> Cc: David Laight <[email protected]> Signed-off-by: Guenter Roeck <[email protected]> Signed-off-by: Helge Deller <[email protected]>
2024-02-19PCI/MSI: Prevent MSI hardware interrupt number truncationVidya Sagar1-1/+1
While calculating the hardware interrupt number for a MSI interrupt, the higher bits (i.e. from bit-5 onwards a.k.a domain_nr >= 32) of the PCI domain number gets truncated because of the shifted value casting to return type of pci_domain_nr() which is 'int'. This for example is resulting in same hardware interrupt number for devices 0019:00:00.0 and 0039:00:00.0. To address this cast the PCI domain number to 'irq_hw_number_t' before left shifting it to calculate the hardware interrupt number. Please note that this fixes the issue only on 64-bit systems and doesn't change the behavior for 32-bit systems i.e. the 32-bit systems continue to have the issue. Since the issue surfaces only if there are too many PCIe controllers in the system which usually is the case in modern server systems and they don't tend to run 32-bit kernels. Fixes: 3878eaefb89a ("PCI/MSI: Enhance core to support hierarchy irqdomain") Signed-off-by: Vidya Sagar <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Tested-by: Shanker Donthineni <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected]
2024-02-19irqchip/sifive-plic: Enable interrupt if needed before EOINam Cao1-1/+7
RISC-V PLIC cannot "end-of-interrupt" (EOI) disabled interrupts, as explained in the description of Interrupt Completion in the PLIC spec: "The PLIC signals it has completed executing an interrupt handler by writing the interrupt ID it received from the claim to the claim/complete register. The PLIC does not check whether the completion ID is the same as the last claim ID for that target. If the completion ID does not match an interrupt source that *is currently enabled* for the target, the completion is silently ignored." Commit 69ea463021be ("irqchip/sifive-plic: Fixup EOI failed when masked") ensured that EOI is successful by enabling interrupt first, before EOI. Commit a1706a1c5062 ("irqchip/sifive-plic: Separate the enable and mask operations") removed the interrupt enabling code from the previous commit, because it assumes that interrupt should already be enabled at the point of EOI. However, this is incorrect: there is a window after a hart claiming an interrupt and before irq_desc->lock getting acquired, interrupt can be disabled during this window. Thus, EOI can be invoked while the interrupt is disabled, effectively nullify this EOI. This results in the interrupt never gets asserted again, and the device who uses this interrupt appears frozen. Make sure that interrupt is really enabled before EOI. Fixes: a1706a1c5062 ("irqchip/sifive-plic: Separate the enable and mask operations") Signed-off-by: Nam Cao <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Cc: Palmer Dabbelt <[email protected]> Cc: Paul Walmsley <[email protected]> Cc: Samuel Holland <[email protected]> Cc: Marc Zyngier <[email protected]> Cc: Guo Ren <[email protected]> Cc: [email protected] Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2024-02-19platform/x86/amd/pmf: Fix a potential race with policy binary sideloadMario Limonciello1-2/+3
The debugfs `update_policy` file is created before amd_pmf_start_policy_engine() has completed, and thus there could be a possible (albeit unlikely) race between sideloading a policy and the BIOS policy getting setup. Move the debugfs file creation after all BIOS policy is setup. Fixes: 10817f28e533 ("platform/x86/amd/pmf: Add capability to sideload of policy binary") Reported-by: Hans de Goede <[email protected]> Closes: https://lore.kernel.org/platform-driver-x86/[email protected]/T/#m2c445f135e5ef9b53184be7fc9df84e15f89d4d9 Signed-off-by: Mario Limonciello <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Hans de Goede <[email protected]> Signed-off-by: Hans de Goede <[email protected]>
2024-02-19platform/x86/amd/pmf: Fixup error handling for amd_pmf_init_smart_pc()Mario Limonciello1-25/+40
amd_pmf_init_smart_pc() calls out to amd_pmf_get_bios_buffer() but the error handling flow doesn't clean everything up allocated memory. As amd_pmf_get_bios_buffer() is only called by amd_pmf_init_smart_pc(), fold it into the function and add labels to clean up any step that can fail along the way. Explicitly set everything allocated to NULL as there are other features that may access some of the same variables. Fixes: 7c45534afa44 ("platform/x86/amd/pmf: Add support for PMF Policy Binary") Signed-off-by: Mario Limonciello <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Hans de Goede <[email protected]> Signed-off-by: Hans de Goede <[email protected]>
2024-02-19platform/x86/amd/pmf: Add debugging message for missing policy dataMario Limonciello1-1/+3
If a machine advertises Smart PC support but is missing policy data show a debugging message to help clarify why Smart PC wasn't enabled. Reviewed-by: Hans de Goede <[email protected]> Signed-off-by: Mario Limonciello <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Hans de Goede <[email protected]>
2024-02-19platform/x86/amd/pmf: Fix a suspend hang on Framework 13Mario Limonciello1-2/+0
The buffer is cleared in the suspend handler but used in the delayed work for amd_pmf_get_metrics(). Stop clearing it to fix the hang. Reported-by: Trolli Schmittlauch <[email protected]> Closes: https://lore.kernel.org/regressions/ed2226ff-257b-4cfd-afd6-bf3be9785474@localhost/ Closes: https://community.frame.work/t/kernel-6-8-rc-system-freezes-after-resuming-from-suspend-reproducers-wanted/45381 Fixes: 2b3a7f06caaf ("platform/x86/amd/pmf: Change return type of amd_pmf_set_dram_addr()") Signed-off-by: Mario Limonciello <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Hans de Goede <[email protected]> Signed-off-by: Hans de Goede <[email protected]>
2024-02-19platform/x86/amd/pmf: Fix TEE enact command failure after suspend and resumeShyam Sundar S K1-0/+6
TEE enact command failures are seen after each suspend/resume cycle; fix this by cancelling the policy builder workqueue before going into suspend and reschedule the workqueue after resume. [ 629.516792] ccp 0000:c2:00.2: tee: command 0x5 timed out, disabling PSP [ 629.516835] amd-pmf AMDI0102:00: TEE enact cmd failed. err: ffff000e, ret:0 [ 630.550464] amd-pmf AMDI0102:00: AMD_PMF_REGISTER_RESPONSE:1 [ 630.550511] amd-pmf AMDI0102:00: AMD_PMF_REGISTER_ARGUMENT:7 [ 630.550548] amd-pmf AMDI0102:00: AMD_PMF_REGISTER_MESSAGE:16 Fixes: ae82cef7d9c5 ("platform/x86/amd/pmf: Add support for PMF-TA interaction") Co-developed-by: Patil Rajesh Reddy <[email protected]> Signed-off-by: Patil Rajesh Reddy <[email protected]> Signed-off-by: Shyam Sundar S K <[email protected]> Reviewed-by: Mario Limonciello <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Hans de Goede <[email protected]> Signed-off-by: Hans de Goede <[email protected]>
2024-02-19platform/x86/amd/pmf: Remove smart_pc_status enumShyam Sundar S K3-10/+10
Improve code readability by removing smart_pc_status enum, as the same can be done with a simple true/false check; Update the code checks accordingly. Also add a missing return on amd_pmf_init_smart_pc() success, to skip trying to setup the auto / slider modes which should not be used in this case. Signed-off-by: Shyam Sundar S K <[email protected]> Reviewed-by: Mario Limonciello <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Hans de Goede <[email protected]> Signed-off-by: Hans de Goede <[email protected]>
2024-02-19platform/x86: touchscreen_dmi: Consolidate Goodix upside-down touchscreen dataHans de Goede1-15/+10
Now that prefix matches for ACPI names are supported, the ts_dmi_data structs for "GDIX1001:00" and "GDIX1001:01" can be consolidated into a single match matching on "GDIX1001". For consistency also change gdix1002_00_upside_down_data to match. Reviewed-by: Kuppuswamy Sathyanarayanan <[email protected]> Signed-off-by: Hans de Goede <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2024-02-19platform/x86: touchscreen_dmi: Allow partial (prefix) matches for ACPI namesHans de Goede1-2/+2
On some devices the ACPI name of the touchscreen is e.g. either MSSL1680:00 or MSSL1680:01 depending on the BIOS version. This happens for example on the "Chuwi Hi8 Air" tablet where the initial commit's ts_data uses "MSSL1680:00" but the tablets from the github issue and linux-hardware.org probe linked below both use "MSSL1680:01". Replace the strcmp() match on ts_data->acpi_name with a strstarts() check to allow using a partial match on just the ACPI HID of "MSSL1680" and change the ts_data->acpi_name for the "Chuwi Hi8 Air" accordingly to fix the touchscreen not working on models where it is "MSSL1680:01". Note this drops the length check for I2C_NAME_SIZE. This never was necessary since the ACPI names used are never more then 11 chars and I2C_NAME_SIZE is 20 so the replaced strncmp() would always stop long before reaching I2C_NAME_SIZE. Link: https://linux-hardware.org/?computer=AC4301C0542A Fixes: bbb97d728f77 ("platform/x86: touchscreen_dmi: Add info for the Chuwi Hi8 Air tablet") Closes: https://github.com/onitake/gsl-firmware/issues/91 Cc: [email protected] Reviewed-by: Kuppuswamy Sathyanarayanan <[email protected]> Signed-off-by: Hans de Goede <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2024-02-19platform/x86: intel: int0002_vgpio: Pass IRQF_ONESHOT to request_irq()Hans de Goede1-1/+1
Since commit 7a36b901a6eb ("ACPI: OSL: Use a threaded interrupt handler for SCI") the ACPI OSL code passes IRQF_ONESHOT when requesting the SCI. Since the INT0002 GPIO is typically shared with the ACPI SCI the INT0002 driver must pass the same flags. This fixes the INT0002 driver failing to probe due to following error + as well as removing the backtrace that follows this error: "genirq: Flags mismatch irq 9. 00000084 (INT0002) vs. 00002080 (acpi)" Fixes: 7a36b901a6eb ("ACPI: OSL: Use a threaded interrupt handler for SCI") Signed-off-by: Hans de Goede <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2024-02-19platform/x86: think-lmi: Fix password opcode ordering for workstationsMark Pearson1-9/+11
The Lenovo workstations require the password opcode to be run before the attribute value is changed (if Admin password is enabled). Tested on some Thinkpads to confirm they are OK with this order too. Signed-off-by: Mark Pearson <[email protected]> Fixes: 640a5fa50a42 ("platform/x86: think-lmi: Opcode support") Reviewed-by: Ilpo Järvinen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Hans de Goede <[email protected]> Signed-off-by: Hans de Goede <[email protected]>
2024-02-19selftests/bpf: Add negtive test cases for task iterYafang Shao2-1/+12
Incorporate a test case to assess the handling of invalid flags or task__nullable parameters passed to bpf_iter_task_new(). Prior to the preceding commit, this scenario could potentially trigger a kernel panic. However, with the previous commit, this test case is expected to function correctly. Signed-off-by: Yafang Shao <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2024-02-19bpf: Fix an issue due to uninitialized bpf_iter_taskYafang Shao1-0/+2
Failure to initialize it->pos, coupled with the presence of an invalid value in the flags variable, can lead to it->pos referencing an invalid task, potentially resulting in a kernel panic. To mitigate this risk, it's crucial to ensure proper initialization of it->pos to NULL. Fixes: ac8148d957f5 ("bpf: bpf_iter_task_next: use next_task(kit->task) rather than next_task(kit->pos)") Signed-off-by: Yafang Shao <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Yonghong Song <[email protected]> Acked-by: Oleg Nesterov <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2024-02-19selftests/bpf: Test racing between bpf_timer_cancel_and_free and ↵Martin KaFai Lau2-2/+67
bpf_timer_cancel This selftest is based on a Alexei's test adopted from an internal user to troubleshoot another bug. During this exercise, a separate racing bug was discovered between bpf_timer_cancel_and_free and bpf_timer_cancel. The details can be found in the previous patch. This patch is to add a selftest that can trigger the bug. I can trigger the UAF everytime in my qemu setup with KASAN. The idea is to have multiple user space threads running in a tight loop to exercise both bpf_map_update_elem (which calls into bpf_timer_cancel_and_free) and bpf_timer_cancel. Signed-off-by: Martin KaFai Lau <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Hou Tao <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2024-02-19bpf: Fix racing between bpf_timer_cancel_and_free and bpf_timer_cancelMartin KaFai Lau1-1/+4
The following race is possible between bpf_timer_cancel_and_free and bpf_timer_cancel. It will lead a UAF on the timer->timer. bpf_timer_cancel(); spin_lock(); t = timer->time; spin_unlock(); bpf_timer_cancel_and_free(); spin_lock(); t = timer->timer; timer->timer = NULL; spin_unlock(); hrtimer_cancel(&t->timer); kfree(t); /* UAF on t */ hrtimer_cancel(&t->timer); In bpf_timer_cancel_and_free, this patch frees the timer->timer after a rcu grace period. This requires a rcu_head addition to the "struct bpf_hrtimer". Another kfree(t) happens in bpf_timer_init, this does not need a kfree_rcu because it is still under the spin_lock and timer->timer has not been visible by others yet. In bpf_timer_cancel, rcu_read_lock() is added because this helper can be used in a non rcu critical section context (e.g. from a sleepable bpf prog). Other timer->timer usages in helpers.c have been audited, bpf_timer_cancel() is the only place where timer->timer is used outside of the spin_lock. Another solution considered is to mark a t->flag in bpf_timer_cancel and clear it after hrtimer_cancel() is done. In bpf_timer_cancel_and_free, it busy waits for the flag to be cleared before kfree(t). This patch goes with a straight forward solution and frees timer->timer after a rcu grace period. Fixes: b00628b1c7d5 ("bpf: Introduce bpf timers.") Suggested-by: Alexei Starovoitov <[email protected]> Signed-off-by: Martin KaFai Lau <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Hou Tao <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2024-02-19enic: Avoid false positive under FORTIFY_SOURCEKees Cook1-1/+2
FORTIFY_SOURCE has been ignoring 0-sized destinations while the kernel code base has been converted to flexible arrays. In order to enforce the 0-sized destinations (e.g. with __counted_by), the remaining 0-sized destinations need to be handled. Unfortunately, struct vic_provinfo resists full conversion, as it contains a flexible array of flexible arrays, which is only possible with the 0-sized fake flexible array. Use unsafe_memcpy() to avoid future false positives under CONFIG_FORTIFY_SOURCE. Signed-off-by: Kees Cook <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2024-02-19ionic: use pci_is_enabled not open codeShannon Nelson1-1/+1
Since there is a utility available for this, use the API rather than open code. Fixes: 13943d6c8273 ("ionic: prevent pci disable of already disabled device") Reviewed-by: Brett Creeley <[email protected]> Signed-off-by: Shannon Nelson <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2024-02-19btrfs: fix deadlock with fiemap and extent lockingJosef Bacik1-17/+45
While working on the patchset to remove extent locking I got a lockdep splat with fiemap and pagefaulting with my new extent lock replacement lock. This deadlock exists with our normal code, we just don't have lockdep annotations with the extent locking so we've never noticed it. Since we're copying the fiemap extent to user space on every iteration we have the chance of pagefaulting. Because we hold the extent lock for the entire range we could mkwrite into a range in the file that we have mmap'ed. This would deadlock with the following stack trace [<0>] lock_extent+0x28d/0x2f0 [<0>] btrfs_page_mkwrite+0x273/0x8a0 [<0>] do_page_mkwrite+0x50/0xb0 [<0>] do_fault+0xc1/0x7b0 [<0>] __handle_mm_fault+0x2fa/0x460 [<0>] handle_mm_fault+0xa4/0x330 [<0>] do_user_addr_fault+0x1f4/0x800 [<0>] exc_page_fault+0x7c/0x1e0 [<0>] asm_exc_page_fault+0x26/0x30 [<0>] rep_movs_alternative+0x33/0x70 [<0>] _copy_to_user+0x49/0x70 [<0>] fiemap_fill_next_extent+0xc8/0x120 [<0>] emit_fiemap_extent+0x4d/0xa0 [<0>] extent_fiemap+0x7f8/0xad0 [<0>] btrfs_fiemap+0x49/0x80 [<0>] __x64_sys_ioctl+0x3e1/0xb50 [<0>] do_syscall_64+0x94/0x1a0 [<0>] entry_SYSCALL_64_after_hwframe+0x6e/0x76 I wrote an fstest to reproduce this deadlock without my replacement lock and verified that the deadlock exists with our existing locking. To fix this simply don't take the extent lock for the entire duration of the fiemap. This is safe in general because we keep track of where we are when we're searching the tree, so if an ordered extent updates in the middle of our fiemap call we'll still emit the correct extents because we know what offset we were on before. The only place we maintain the lock is searching delalloc. Since the delalloc stuff can change during writeback we want to lock the extent range so we have a consistent view of delalloc at the time we're checking to see if we need to set the delalloc flag. With this patch applied we no longer deadlock with my testcase. CC: [email protected] # 6.1+ Reviewed-by: Filipe Manana <[email protected]> Signed-off-by: Josef Bacik <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]>
2024-02-19btrfs: defrag: avoid unnecessary defrag caused by incorrect extent sizeQu Wenruo1-1/+1
[BUG] With the following file extent layout, defrag would do unnecessary IO and result more on-disk space usage. # mkfs.btrfs -f $dev # mount $dev $mnt # xfs_io -f -c "pwrite 0 40m" $mnt/foobar # sync # xfs_io -f -c "pwrite 40m 16k" $mnt/foobar # sync Above command would lead to the following file extent layout: item 6 key (257 EXTENT_DATA 0) itemoff 15816 itemsize 53 generation 7 type 1 (regular) extent data disk byte 298844160 nr 41943040 extent data offset 0 nr 41943040 ram 41943040 extent compression 0 (none) item 7 key (257 EXTENT_DATA 41943040) itemoff 15763 itemsize 53 generation 8 type 1 (regular) extent data disk byte 13631488 nr 16384 extent data offset 0 nr 16384 ram 16384 extent compression 0 (none) Which is mostly fine. We can allow the final 16K to be merged with the previous 40M, but it's upon the end users' preference. But if we defrag the file using the default parameters, it would result worse file layout: # btrfs filesystem defrag $mnt/foobar # sync item 6 key (257 EXTENT_DATA 0) itemoff 15816 itemsize 53 generation 7 type 1 (regular) extent data disk byte 298844160 nr 41943040 extent data offset 0 nr 8650752 ram 41943040 extent compression 0 (none) item 7 key (257 EXTENT_DATA 8650752) itemoff 15763 itemsize 53 generation 9 type 1 (regular) extent data disk byte 340787200 nr 33292288 extent data offset 0 nr 33292288 ram 33292288 extent compression 0 (none) item 8 key (257 EXTENT_DATA 41943040) itemoff 15710 itemsize 53 generation 8 type 1 (regular) extent data disk byte 13631488 nr 16384 extent data offset 0 nr 16384 ram 16384 extent compression 0 (none) Note the original 40M extent is still there, but a new 32M extent is created for no benefit at all. [CAUSE] There is an existing check to make sure we won't defrag a large enough extent (the threshold is by default 32M). But the check is using the length to the end of the extent: range_len = em->len - (cur - em->start); /* Skip too large extent */ if (range_len >= extent_thresh) goto next; This means, for the first 8MiB of the extent, the range_len is always smaller than the default threshold, and would not be defragged. But after the first 8MiB, the remaining part would fit the requirement, and be defragged. Such different behavior inside the same extent caused the above problem, and we should avoid different defrag decision inside the same extent. [FIX] Instead of using @range_len, just use @em->len, so that we have a consistent decision among the same file extent. Now with this fix, we won't touch the extent, thus not making it any worse. Reported-by: Filipe Manana <[email protected]> Fixes: 0cb5950f3f3b ("btrfs: fix deadlock when reserving space during defrag") CC: [email protected] # 6.1+ Reviewed-by: Boris Burkov <[email protected]> Reviewed-by: Filipe Manana <[email protected]> Signed-off-by: Qu Wenruo <[email protected]> Signed-off-by: David Sterba <[email protected]>
2024-02-19drm/tests/drm_buddy: fix 32b buildMatthew Auld1-8/+8
Doesn't seem to compile on 32b, presumably due to u64 mod/division. Simplest is to just switch over to u32 here. Also make print modifiers consistent with that. Fixes: a64056bb5a32 ("drm/tests/drm_buddy: add alloc_contiguous test") Reported-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Matthew Auld <[email protected]> Cc: Arunpravin Paneer Selvam <[email protected]> Cc: Christian König <[email protected]> Cc: Maxime Ripard <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Christian König <[email protected]>
2024-02-19ata: ahci_ceva: fix error handling for Xilinx GT PHY supportRadhey Shyam Pandey1-46/+79
Platform clock and phy error resources are not cleaned up in Xilinx GT PHY error path. To fix introduce the function ceva_ahci_platform_enable_resources() which is a customized version of ahci_platform_enable_resources() and inline with SATA IP programming sequence it does: - Assert SATA reset - Program PS GTR phy - Bring SATA by de-asserting the reset - Wait for GT lane PLL to be locked ceva_ahci_platform_enable_resources() is also used in the resume path as the same SATA programming sequence (as in probe) should be followed. Also cleanup the mixed usage of ahci_platform_enable_resources() and custom implementation in the probe function as both are not required. Fixes: 9a9d3abe24bb ("ata: ahci: ceva: Update the driver to support xilinx GT phy") Signed-off-by: Radhey Shyam Pandey <[email protected]> Reviewed-by: Damien Le Moal <[email protected]> Signed-off-by: Niklas Cassel <[email protected]>
2024-02-19ahci: asm1064: correct count of reported portsAndrey Jr. Melnikov1-3/+11
The ASM1064 SATA host controller always reports wrongly, that it has 24 ports. But in reality, it only has four ports. before: ahci 0000:04:00.0: SSS flag set, parallel bus scan disabled ahci 0000:04:00.0: AHCI 0001.0301 32 slots 24 ports 6 Gbps 0xffff0f impl SATA mode ahci 0000:04:00.0: flags: 64bit ncq sntf stag pm led only pio sxs deso sadm sds apst after: ahci 0000:04:00.0: ASM1064 has only four ports ahci 0000:04:00.0: forcing port_map 0xffff0f -> 0xf ahci 0000:04:00.0: SSS flag set, parallel bus scan disabled ahci 0000:04:00.0: AHCI 0001.0301 32 slots 24 ports 6 Gbps 0xf impl SATA mode ahci 0000:04:00.0: flags: 64bit ncq sntf stag pm led only pio sxs deso sadm sds apst Signed-off-by: "Andrey Jr. Melnikov" <[email protected]> Signed-off-by: Niklas Cassel <[email protected]>
2024-02-19selftests: bonding: set active slave to primary eth1 specificallyHangbin Liu1-0/+2
In bond priority testing, we set the primary interface to eth1 and add eth0,1,2 to bond in serial. This is OK in normal times. But when in debug kernel, the bridge port that eth0,1,2 connected would start slowly (enter blocking, forwarding state), which caused the primary interface down for a while after enslaving and active slave changed. Here is a test log from Jakub's debug test[1]. [ 400.399070][ T50] br0: port 1(s0) entered disabled state [ 400.400168][ T50] br0: port 4(s2) entered disabled state [ 400.941504][ T2791] bond0: (slave eth0): making interface the new active one [ 400.942603][ T2791] bond0: (slave eth0): Enslaving as an active interface with an up link [ 400.943633][ T2766] br0: port 1(s0) entered blocking state [ 400.944119][ T2766] br0: port 1(s0) entered forwarding state [ 401.128792][ T2792] bond0: (slave eth1): making interface the new active one [ 401.130771][ T2792] bond0: (slave eth1): Enslaving as an active interface with an up link [ 401.131643][ T69] br0: port 2(s1) entered blocking state [ 401.132067][ T69] br0: port 2(s1) entered forwarding state [ 401.346201][ T2793] bond0: (slave eth2): Enslaving as a backup interface with an up link [ 401.348414][ T50] br0: port 4(s2) entered blocking state [ 401.348857][ T50] br0: port 4(s2) entered forwarding state [ 401.519669][ T250] bond0: (slave eth0): link status definitely down, disabling slave [ 401.526522][ T250] bond0: (slave eth1): link status definitely down, disabling slave [ 401.526986][ T250] bond0: (slave eth2): making interface the new active one [ 401.629470][ T250] bond0: (slave eth0): link status definitely up [ 401.630089][ T250] bond0: (slave eth1): link status definitely up [...] # TEST: prio (active-backup ns_ip6_target primary_reselect 1) [FAIL] # Current active slave is eth2 but not eth1 Fix it by setting active slave to primary slave specifically before testing. [1] https://netdev-3.bots.linux.dev/vmksft-bonding-dbg/results/464301/1-bond-options-sh/stdout Fixes: 481b56e0391e ("selftests: bonding: re-format bond option tests") Signed-off-by: Hangbin Liu <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.